22 Results
Berthelsen Hot Shuttle Press, 60" X 120", 2-ply, Allen Bradley controls, Sterlco Hot oil heater
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Hot Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Berthelsen
BERTHELSEN 5' x 10' 2-PLY HOT SHUTTLE PRESS, Alan Bradley Controls, Sterlco Hot oil Heater.
Burkle #ODW-1426/300, Melamine Press Line, 4' x 8' format, 90 boards/hour, 510,000 BTU/h boiler, Siemens Simatic Operator Interface, 480 Volt, 2007
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: ODW 1426/300
Year: 2007
BURKLE ODW 1426/300 4' x 8' Automatic Short-Cycle Through Feed Melamine Press LineProduction Capacity:Press time ranges from 20 - 40 Sec, depending on the thickness of the paper and the resin coat. With a press time of 25 Sec and a handling time of approx. 15 Sec, the output capacity is (90) boards per hour. ...more
Hofer #HKP-400, hot oil feed through hot press, 5' x 10', 127" L x 71" W belt conveyor
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hofer
Model: HKP-400
HOFER - HKP-400 Feed Through Hot Press SystemFeed through end load hot press for laminating panels up to 5' x 10' in size. Parts are loaded onto the in feed belt and once cycle is started the belt in the press works in timing with the in feed belt conveyor to both unload what is currently in the press as well ...more
Hydrex #HPX410-5, hot oil hot press, 160 ton, 5 daylight openings, 10 upstroke cylinders, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hydrex
Model: HPX410-5
Year: 2026
HYDREX HPX410-5 Hot Press 160 Tons using (8) hydraulic cylinders, Five daylight openings. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.s (Overall): -- Board size up to nominal 4' x 10' (about 51" x 126"). -- Front Controls for easy setup & operating configuration ...more
Hydrex #HPX510-5, hot oil hot press, 120 ton, 5 daylight openings, 5' x10', 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hydrex
Model: HPX510-5
Year: 2026
HYDREX HPX510-5 Hot Press 120 Tons with (5) Daylight openings. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.s (Overall): -- Board size up to 5' x 10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time, emergency pedal, and ...more
Get email updates for newly added Woodworking Hot Presses
Woodworking hot presses are machines used to bond layers of wood or veneer with heat and pressure, creating strong, durable panels. These machines ensure uniform curing and high-quality finishes through adjustable temperature controls and hydraulic systems. Hot presses are essential in woodworking for efficient and consistent lamination, making them vital for producing doors, panels, and other laminated products.
JUST ADDED!
Hydrex #HPX512-5, Hot Press, w/(5) Daylight Openings, 5' x 10' Board Size, (8) 100 mm diameter Cylinders, 160 Tons Overall, 100 psi, 54 kW Heating, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hydrex
Model: HPX512-5
Year: 2026
HYDREX HPX510-5 Hot Press 160 Tons with (5) Daylight openings. Suitable for laminating veneer panels/doors, plastics/decorative paper, fireproof board, etc.s (Overall): -- Board size up to approx 5' x 10'. -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time ...more
JUST ADDED!
Italpresse #GL/190-PS, High Temp Hot Press, 74-3/4" x 23-1/2" Platens, 800 Ton, 300 Deg C (572 F), 4 Cylinders, 12-3/4" Stroke, 2000
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Italpresse
Model: GL/190-PS
Year: 2000
ITALPRESSE MODEL 'GL/190-PS' High Temperature Hot PressHeavy hydraulic presses for forming, compression molding, stamping of wooden and non-wooden materials. and S -Heavy construction weld free steel ring frame, CNC machined.Top - Down platen movementPlaten Dimensions - 1900 mm (74-3/4") Long x 600 mm ...more
Italpresse #SCF/10, Hot Press, 63" x 146" platen, 190 Ton, 15-5/8" max. daylight, (10) hydraulic upstroke cylinders, 4 HP hydraulic pump motor, 2001
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Italpresse
Model: SCF/10
Year: 2001
ITALPRESSE - SCF/10: 5' x 12' Hot Press with: 63" x 146" (1,600 mm x 3,733 mm) Platens15-5/8" (396 mm) Max. daylight opening; (10) hydraulic upstroke cylinders (2 cylinders at each end can be deactivated from the control panel, allowing pressing of smaller work pieces and preventing damage); 190 metric tons of ...more
JUST ADDED!
Italpresse #XL/10-38-16 PMBO, hydraulic hot press, 2007
Machinery Associates Inc | Hudson, NH
Category: Woodworking Hot Presses
Seller: Machinery Associates Inc
Location: Hudson, NH
Mfr: Italpresse
Model: XL/10-38-16
Year: 2007
Italpresse Model XL/10 38-16 PMBO Hydraulic Hot Press, Platen dimensions: 3,800 x 1,600 mm (149 x 63 in.), Number of daylights: 1, Total cylinder stroke: 400 mm (15-3/4 in.), Number of pressing cylinders: 10, Diameter of pressing cylinders: 85mm each, Total thrust: 190 metric tons (418,878 lbs), Max. laminating ...more
Italpresse #XL/10-38-16, PMBO Hydraulic Hot Press, 149" x 63" platens, 209 Ton, 15-3/4" stroke, 10 cyl, 4 HP, new
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL/10-38-16
Italpresse Model XL/10 38-16 PMBO Hydraulic Hot Press Platen dimensions: 3,800 x 1,600 mm (149 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 10 Diameter of pressing cylinders: 85mm each Total thrust: 190 metric tons (418,878 lbs) Max. laminating pressure on ...more
Italpresse #XL/6-25-13, PABO Hydraulic Hot Press, 98" x 51" platens, 132 Ton, 15-3/4" stroke, 6 cyl, 3 HP, new
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL/6-25-13
Italpresse Model XL/6 25-13 PABO Hydraulic Hot Press Platen dimensions: 2,500 x 1,300 mm (98 x 51 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 6 Total thrust: 120 metric tons (264,554 lbs) Max. laminating pressure: 4.56 kg/cm2 (66 psi) Hydraulic pump: 2.1 kw (3 ...more
JUST ADDED!
Italpresse #XL/8, Hot Press, 165" x 55" platens, 160 Ton, 15-1/4" max. daylight opening, (8) 3-3/8" diameter hydraulic upstroke cylinders, 3 HP hydraulic pump motor, 40 psi, 2009
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Italpresse
Model: XL/8
Year: 2009
2009 ITALPRESSE XL-8 Hot Press Technical : -- Platen dimension 165" x 55" (4,200 mm x 1,400 mm). -- Max. daylight opening 15-1/4" (390 mm). -- (8) Hydraulic upstroke cylinders with diam. 3-3/8" (85 mm). -- 160 Metric ton overall pressure with 3 HP hydraulic pump motor, producing over 40 PSI over entire platen ...more
Italpresse #XL/8-33-13, PABO Hydraulic Hot Press, 126" x 63" platens, 176 Ton, 15-3/4" stroke, 8 cyl, 4 HP, new
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL/8-33-13
Italpresse Model XL/8 33-13 PABO Platen dimensions: 3,300 x 1,300 mm (126 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4" in.) Number of pressing cylinders: 8 Total thrust: 160 metric tons (352,739 lbs) Max. laminating pressure 100% OF PLATEN AREA 3.3 kg/cm2 (47 psi) Max. laminating pressure ...more
Italpresse #XL8-32-16, PABO Hydraulic Hot Press, 126" x 63" platens, 176 Ton, 15-3/4" stroke, 8 cyl, 4 HP, new
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL8-32-16
Italpresse Model XL8 32-16 PABO Hydraulic Hot Press Platen dimensions: 3,200 x 1,600 mm (126 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 8 Total thrust: 160 metric tons (176,000 lbs) Max. laminating pressure: 3.9 kg/cm2 (55 psi) Hydraulic pump: 3 kw (4 hp) ...more
Lamb 150 HP Hammermill, 23" x27" opening grinder, 1-3/8" screen and starter control
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Hot Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Lamb
LAMB 23x27 inch opening grinder with 150 HP motor, 1 3/8” screen and starter control., 460 volt 3-phase.
JUST ADDED!
Orma Machine #NPC-Digit-6-100AF-BO, Hydraulic Hot Platen Press, 120 ton, 98" x 51" platen, 15-3/4" single opening, 35 psi, 2 HP pump, 208 Volt, 2010
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Orma
Model: NPC DIGIT 25/13
Year: 2010
ORMA MACHINE NPC DIGIT 6-100 AF-BO98" x 51" Platen size, up-stroke design, 15-3/4" (400 mm) single opening, design allows side or end loading. -- 120 tons total pressure, 35 PSI pressure over 100% of the platen; (6) upstroke cylinders 85 mm dia. with chromed cylinder walls. -- Rack & pinion guided lower platen to ...more
OTT #Melamine-Press-Line, Melamine Press Line, 5' x 10' sheet, 2-Pallet Stacking area, 1983
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ott
Model: MELAMINE PRESS LINE
Year: 1983
OTT Melamine Press Line Complete5' x 10' pressComplete Ott Melamine Press Line with Feeding, Pressing, Trimming and Stacking.Line is a loading area then rolls to the static cling area for picking the melamine sheets and then rolls into the press.Has a flip inspection area after the press to inspect the bottom ...more
OTT, Feed-Thru Hot Press, 56" x 116" Platen Size, (8) Hydraulic Cylinders, (2) HTT Boilers, Rebuilt 1999
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ott
Year: 1999
Ott Feed-Thru Hot Press Platen Size: 56" x 116" Feed Thru Mylar Belt Eight Hydraulic Cylinder on Top Platen Two HTT Boilers Type WTE 08-5-50-1, Max Temperature 300 Degrees Celsius (New in 2001) Press was purchased Rebuilt in 1999.
Sennerskov #GLP-12651, Hot Press, 5' x 10' Platen Size, 80 kW
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sennerskov
Model: GLP 12651
Sennerskov Model GLP 12651 Hot Press Platen Size 5' x 10' Hot Water Platens Heated with Electric Elements Totaling 80KW.
SIMI, electric heat hot press, 5' x 10', 17" daylight opening, 1989
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Simi
Year: 1989
SIMI 5' x 10' HOT PRESS Platen dimension 123" x 63" (3,125 mm x 1,600 mm). -- Max. daylight opening 17" (430 mm). -- (8) Hydraulic upstroke cylinders with diam. 6" (150 mm). -- Electrically heated platens with a maximum heating temperature of 240 F (120 C) -- Loading on all (4) sides of press.Overall ...more
Yamamoto HE2-500-30W, Multi-Opening Plywood Hot Press, 30-opening, 500 Ton, 4.7" daylight, 54" x 108" x 1.5" press plates, 1991
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Yamamoto
Model: HE2-500-30W
Year: 1991
Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation ...more
Yamamoto HE2-500-45WSA, Multi-Opening Plywood Hot Press, 45-opening, 500 Ton, 2.75" daylight, 106" x 53" x 1.57" press platens, 1996
Ex-Factory | Charlotte, NC
Category: Woodworking Hot Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Yamamoto
Model: HE2-500-45WSA
Year: 1996
Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with ...more
