go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Screw Type Injection Molding Machine

warning
1 - 50 of 409 listings

7 Ton, Nissei, micro molding machine, small injection molder, 14mm screw diameter, 40mm injection stroke

TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Nissei
Find many great new & used options and get the best deals for NISSEI 7 TON MICRO MOLDING MACHINE / SMALL INJECTION MOLDER. Free shipping for many products!.

12 Ton, Boy #12A, Horizontal Injection Molding Machine, 10.19" x 10.19" tie bar spacing, 15.74" x 8.66" platen, 7.87" clamp stroke, 230 V., 2000

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Boy
Model: 12A
Year: 2000
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6601), TONNAGE 12 TIE BAR SPACING 10.19" x 10.19" PLATEN ...more

15 Ton, 0.36 oz., Battenfeld #MicroPower-15/10, injection molding machine, 9.44" x 15.74" platens, Unilog B8 Control, 2021

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: MICROPOWER 15/10 UNILOG B8
Year: 2021
Used Battenfeld MicroPower 15/10 Unilog B8 (2021) Injection Molding Machine for Sale. This micro-molding press is rated at 15 Ton clamping capacity with a 0.36 oz shot size and a Unilog control. Platen size is 9.44″ x 15.74″, with 15.74″ max daylight, minimum/maximum mold height of ...more

15 Ton, Wittmann #MicroPower-15/10-H, Micro Injection Molding Machine, rotary table, Tempro plusD Micro140 TCU, W8VS2 robot, UNILOG B8, 2021

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Wittmann
Model: MICROPOWER 15 / 10 H
Year: 2021
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Servo Electric, Injection Volumes up to 4 cm, Rotary Table for (2) Lower Mold Halves, Pneumatic Core Pull, Temperature Control Zone ...more

20 Ton, 4 Oz, Morgan-Press #G-100T, Injection Molding Machine, 1980

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Model: G-100T
Year: 1980
Make: Morgan-Press, Model: G-100T, Year: 1980, Machine Location: Massachusetts, Morgan-Press G-100T Injection Molding Machine, 1980, 1625 Watts, Injection Volume: up to 7.5 cu. in, Injection Volume: 4 oz, Injection Pressure: 9,000 PSI, Clamping Force: 20 ton, Mold Plan Area: 8″ x 11″, Max Processing ...more

Get email updates for newly added Screw Type Injection Molding Machine

Screw Type Injection Molding Machines (also known as screw injection molding presses) are machines that use a rotating screw to inject molten plastic or rubber into molds for precise shaping. Commonly used in industries like automotive, electronics, and packaging, they are ideal for producing high-quality, complex plastic or rubber parts. These machines are essential for efficient, high-speed production and consistent molding of materials.

22 Ton, 0.15 oz., Sodick #LP20VRE, vertical injection molding machine, 14mm screw diameter, 2017

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Sodick
Model: LP20VRE
Year: 2017
The Sodick LP20VRE is a used vertical injection molding machine designed for precision with a clamping force of 22 tons. It s a shot size of 0.15 oz., making it suitable for small, ed plastic components. The machine has a 14 mm screw diameter and a 12 mm plunger diameter, providing efficient material handling. This ...more

22 Ton, 0.15 oz, Sodick #LP20VRE, vertical injection molding machine, 14mm diameter screw, 2017, 153828

Strand Industrial Machinery | Hamel, MN
Seller: Strand Industrial Machinery
Location: Hamel, MN
Mfr: Sodick
Model: LP20VRE
Year: 2017
Type:, Vertical Injection Molding Machine, Manufacturer:, SODICK, Model:, LP20VRE, Year:, 2017, Stock #:, 153828, Status:, For Sale, Tonnage 22 T, Shot Size 0.15 Ounce, SCREW DIAMETER 14 mm, PLUNGER DIAMETER 12 mm, ROTARY TABLE DIAMETER 800 mm, MIN MOLD HEIGHT 7.9 in, OPENING STROKE 1.57 in, OPEN DAYLIGHT 15.7 in ...more

22 Ton, Boy #22A, Injection Molding Machine, 7.87" Clamp Stroke, 10" x 10" Tie Bar, Procan Alpha 2 Control, 2022

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Boy
Model: 22A
Year: 2022
Make: Boy, Model: 22A, Year: 2022, Machine Location: Upon Request, Capacity: 22 Ton, Clamp Stroke: 7.87″, Shot Size: 0.2, Tie Bar Spacing: 10″ x 10″, Minimum Daylight: 7.87″, Maximum Daylight: 15.75″, Platen Size: 15.75″ x 15.75″, Procan Alpha 2 Control.

25 Ton, 1.5 oz., Battenfeld, horizontal injection molding machine, 1979

Plastic Machinery Of New York Inc | Yaphank, NY
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Battenfeld
Year: 1979
25 TON BATTENFELD 1.5 OZ. INJECTION MOLDER, 25 Ton Battenfeld, 1.5 oz, Serial No. 50/25HK6142/9/79Z, HORIZ, Year 1979, Good Condition, Manuals Prints, Tools, Spare Parts.

25 Ton, 2.3 oz., Arburg #Allrounder-275V-250-100, Vertical Injection Molding Machine, 14.76" x 18.7" platens, 8.86" open stroke, 9.84" max. mold height, Selogica control, 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: ALLROUNDER 275V 250-100
Year: 2008
Used Arburg Allrounder 275V 250-100 (2008) Injection Molding Machine for Sale. This vertical press is rated at 25 ton clamp with a 2.3 oz shot size and a 30mm screw and barrel, running under Arburg’s Selogica control. Platen size is 14.76″ x 18.7″, with minimum and maximum mold height of 5.91″ ...more

28 Ton, 0.5 oz., Arburg #270S-250-60, Injection Molding Machine, 10.62" x 10.62" tie bars, 15.98" x 16.06" platen, 18.7" dl, 10.82" mold stroke, Selogica control, 230 V., 2000

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 270S-250-60
Year: 2000
Used Arburg 270S-250-60 (2000) Injection Molding Machine for Sale. This press is rated at 28 ton with a 0.5 oz shot size, tie bar spacing of 10.62″ x 10.62″ and platen size of 15.98″ x 16.06″. Max daylight is 18.7″, minimum mold height is 7.87″ and mold stroke is 10.82″. It ...more

28 Ton, 1.4 oz., Arburg #Allrounder-275V250-70, vertical plastic injection molder, 14.8" open daylight, 2008

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Arburg
Model: ALLROUNDER-275V250-70
Year: 2008
, 2008 28 Ton Arburg Allrounder 275 V 250 - 70, Vertical Clamp - Vertical Injection unit - Rotary table, Shot size: 1.4 oz, Screw diameter: 18 mm, Max. Open daylight: 14.8", Machine is in good running conditions., Imperial Metric Tonnage 28 T 25.401 t Shot Size 1.4 oz 39.7 g Year 2008 2008.

28 Ton, 1.82 oz., Arburg #Allrounder-270S-250-150, horizontal injection molding machine, 25mm screw, 2004

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Arburg
Model: ALLROUNDER-270S-250-150
Year: 2004
, 2004 28 Ton Arburg Allrounder 270 S 250-150:, Shot size: 1.82 Oz, Screw size: 25 mm, Tie bar spacing: 10.62" x 10.62", Platen size: 14.96" x 14.96", Max. Open daylight: 18.7", Control: Selogica, Hours: 4,193, Imperial Metric Tonnage 28 T 25.401 t Shot Size 1.8 oz 51.6 g Year 2004 2004 Control CNC (Selogica) CNC ...more

28 Ton, Arburg #Allrounder-221-K-250-75, injection molding machine, 8.7" tie bar spacing, 13.46" x 9.84" platens, Selogica Control, 2004

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Arburg
Model: ALLROUNDER-221-K-250-75
Year: 2004
Used 28 Ton Arburg ALLROUNDER 221 K 250-75 Horizontal Injection Molding Machine, SELOGICA Controls, New In 2004 28 Ton (250 kN) Clamping Force 25MM Screw, 41Gram/1.44 OZ Shot Size Hydraulic Toggle Clamping System, Two-Tie-Bar Design 8.70" (221 mm) Horizontal Tie-Bar Spacing 13.46" x 9.84" (342 x 250 mm) Platen Size ...more

30 Ton, 2.97 oz., Cincinnati Milacron #Magna-V30-S, Vertical Clamp Injection Molding Machine, 14" daylight, shuttle table, XStreem ST, 230 V., 2005

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Cincinnati Milacron
Model: MAGNA V30-S
Year: 2005
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #5856), DRIVE TYPE Hydraulic TONNAGE 30 SHOT SIZE OZ. 2.97 SHOT SIZE ...more

35 Ton, 3.2 oz., Multiplas #VC-SD-35T, Vertical Injection Molding Machine, shuttle table, 1-3/16" screw, 14.76" max. daylight, hydraulic

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Multiplas
Model: VC-SD-35T
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #5651), DRIVE TYPE Hydraulic TONNAGE 35.

35 Ton, 5.5 oz., Autojectors #HS-35-S, Vertical Clamp Injection Molding Machine, horizontal injection, 6" x 8" platen, 230 V., 1992

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Autojectors
Model: HS-35-S
Year: 1992
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #4737), DRIVE TYPE Hydraulic TONNAGE 35 SHOT SIZE OZ. 5.5 SHOT SIZE ...more

39 Ton, Arburg #220-90-350, Injection Molder, 16.1 kW, 230 V, 1985

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Arburg
Model: 220-90-350
Year: 1985
Used 39 ton Arburg injection molder, type All Rounder, model 220-90-350, with control panel with Sterlco mold temperature controllers, Arburg serial# 128422, built 1985.

44 Ton, 1.2 oz., Nissei #ES400, injection molding machine, 12.2" tie bars, 17.9" platen, toggle clamp, 21.3" daylight, NC9300T, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: ES400
Year: 2001
Used Nissei ES400 (2001) Injection Molding Machine for Sale. This pre-owned Nissei plastic injection molding machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Nissei Injection Molding Machine, please feel free to contact us. ...more

45 Ton, 1.6 oz., Haitian #Zhafir-VE400II, vertical injection molding machine, 12.6" x 11.02" tie bars, Keba Control, 2015

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Haitian
Model: ZHAFIR VE400II
Year: 2015
Used Haitian Zhafir VE400II (2015) Injection Molding Machine for Sale. This all-electric press is rated at 45 ton clamping capacity with a 1.6 oz shot size. Tie bar spacing measures 12.6″ x 11.02″ with a platen size of 18.11″ x 17.32″, and minimum/maximum mold height is 5.91″ to ...more

45 Ton, Battenfeld #45/200/02/08/6/20, injection molder, #178-1

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Battenfeld
Model: 45/200/02/08/6/20
Used Battenfeld injection molder, model 45/200/02/08/6/20, 45 ton clamp force, 16" x 16" platen, 10" x 10" mold area with mold, Unilog 3000 controls, 460 volt, serial# 1900, built 1987.

50 Ton, Arburg #320C Golden Edition All Rounder, horizontal injection molding machine

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Arburg
Model: 320C
Used 55 Ton Arburg Model 320C "Golden Edition All Rounder Horizontal Injection Molding Machine., Mfr: Arburg, 230 volt AC input, 3 phase, 60 hertz, Serial: 173169, Hydraulically operated ram, 12.5" x 12.5" tie bar clearance with 17.56" x 17.56" overall platen size., 21.66" max daylight, 7.87" minimum mold height ...more

50 Ton, Boy, injection molding machine, 1992

Plastic Machinery Of New York Inc | Yaphank, NY
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Boy
Year: 1992
BOY 50 TON Injection Molding Machine 1992, BOY 50 TON Injection Molding Machine 1992.

50 Ton, Krauss Maffei #50/55-CX, Injection Molding Line, 2019

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Kraussmaffei
Model: 50/55-CX
Year: 2019
Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX (serial 61032195) with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine.

51 Ton, 3.8 oz., Tayu #TC-450DS, vertical dual shuttle injection molding machine, Sigmatek Control, new, 2024

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Tayu
Model: TC-450DS
Year: 2024
Voltage: 460V/3P/60Hz, US Tonnage: 51, Model: TC-450DS, Screw Diameter: 32mm.

55 Ton, 1.7 oz., Sumitomo #SE50S-C110S, horizontal plastic injection molder, 23.62" daylight, 12.2" x 12.2" tie bar spacing, 2001

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Sumitomo
Model: SE50S-C110S
Year: 2001
, 2001 55 Ton Sumitomo SE50S-C110S, All Electric Injection Molding machine, Shot size: 1.7 Oz, Screw diameter: 25 mm, Tie bar spacing: 12.20" x 12.20", Platen size: 17.91" x 17.91", Max. Open daylight: 23.62", Picker., Machine in good running conditions., Imperial Metric Tonnage 55 T 49.895 t Shot Size 1.7 oz 48.2 g ...more

55 Ton, 2.97 oz., Cincinnati #VST-33, Injection Molding Machine, 12.8" H x 12.2" W

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: VST-33
Year: 1996
Make: Cincinnati Milacron, Model: VST 33 - 1.08 OZ, Year: 1996, Machine Location: Colorado, 55 Ton, 2.97oz, Cincinnati Injection Moulding Machine:, – Maximum mold: 12.8″ height x 12.2″ width, – Supply volts: 460V, – Control volts: 24-VDC, – Short circuit interrupting capacity 14000 ...more

60 Ton, 0.43/0.60 oz., Nissei #DCE60-2E, electric 2-shot injection molding machine, 19.5" rotary platen, 13.8" x 13.8" tie bar, 23.6" daylight, 2012

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nissei
Model: DCE60-2E
Year: 2012
Used 60 Ton Nissei Electric 2-Shot Injection Molding Machine Model DCE60-2E, 0.43/0.60 Oz, New In 2012 Clamp Force: 60 Ton Shot Size: 0.43 (Main) x 0.60 Oz (Secondary) Rotary Platen Size: 19.5" (D) Platen Size: 20.5" x 20.5" Tie Bar Spacing: 13.77" x 13.77" Min/Max Mold Thickness: 9.44" x 16.53" Daylight: 23.6" ...more

60 Ton, 0.6 oz., Nissei #DCE60-2E, two-shot injection molding machine, 19.5" rotary platen, Tact Control, 2012

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: DCE60-2E
Year: 2012
Used Nissei DCE60-2E (2012) Injection Molding Machine for Sale. This two-shot machine is rated at 60 Ton clamp capacity with shot sizes of 0.43 oz (main) and 0.60 oz (secondary). It carries a 19.5″ diameter rotary platen, 20.5″ x 20.5″ platens, and Tact Control. Power requirement is 230V, and the ...more

60 Ton, 4 oz., LMG #IMM-58, Injection Molding Machine, Two Shot Shuttle Table, 20:1 L/D, 14" x18" platen, 20" daylight, 10" stroke, 2014

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Model: IMM-58
Year: 2014
Make: LMG, Model: LMM-58, Year: 2014, Machine Location: Upon Request, Screw Diameter: 32 mm, Screw L/D: 20:1, Max Shot Capacity: 4 oz, Platen Size: 14″ x 18″, Tie Bar Spacing: 14″ x 18″, Daylight: 20″, Mold Height: 10″ – 15″, Clamp Stroke: 10″.

60 Ton, 4.3 oz., Boy #55EVV-205, Vertical Injection Molding Machine, 38 mm screw, 21.7" daylight, 14.2" x 13.2" tie bar, Procan Alpha 4 ctrller, 2016

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Boy
Model: 55EVV-205
Year: 2016
Used 60 Ton Boy Vertical Injection Molding Machine, Model 55EVV-205, 4.3 Oz, New In 2016 Tonnage: 60 Ton Screw Diameter: 38MM Shot Size: 4.3 Oz Distance Between Tie Bars: 14.17" x 13.19" Max Daylight: 21.65" Min Mold Height: 9.84" Max Opening Stroke: 11.81" Controller: Procan Alpha 2 Control Hours: 3,000 Approximate ...more

60.6 Ton, Boy #55A, hydraulic injection molding machine, 14.17" x 13.19" tie bar spacing, 22.24" x 21.26" platens, 25.59" daylight, 230 V., 2007

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Boy
Model: 55A
Year: 2007
used- 2007 boy model 55a 55-metric-ton hydraulic plastic injection molding machine. manufactured by dr. boy gmbh & co. kg, germany, serial # 59383. previously operated in an iso 13485-certified medical device manufacturing facility. compact, four-tie-bar hydraulic injection molding machine featuring 550 kn ...more

61 Ton, 4.3 oz., Battenfeld #BA-600/200-CDC, Injection Moulding Machine, 19.29" x 19.29" mold plate, 12.60" x 12.60" tie bar spacing, 16.73" mold opening stroke, 18.7" daylight, 575 Volts, 1994

Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Battenfeld
Model: BA 600/200 CDC
Year: 1994
SKU: 149421, Model: BA 600/200 CDC, Year: 1994, Condition: Used, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 83.00 (H) x 60.00 (W) x 156.00 (L) inches, Additional :, Clamping unit, - Clamping force: 600 kN, - Size of mould platens (h x v): 490 mm x 490 mm // 19.29 in. x 19.29 in., - Distance between ...more

65 Ton, 2.4 oz., Arburg #370A-600-100, Injection Molding Machine, 14.5" x 14.5" tie bars, 20.1" x 20.1" platens, air blow, 460 V., 2008

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 370A 600-100
Year: 2008
Used Arburg 370A 600-100 (2008) Injection Molding Machine for Sale. This all-electric style press is rated at 65 ton clamping capacity with a 2.4 oz shot size, platens measuring 20.1″ x 20.1″ and tie bar spacing of 14.5″ x 14.5″. Power requirement is 460V. The machine is air blow and shows less ...more

65 Ton, 4.44 oz., Cincinnati #VSX-55, Injection Molding Machine, 17.9" H x 16.73" W

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: VSX-55
Year: 1900
Make: Cincinnati Milacron, Model: VSX 55 - 4.44 OZ, Year: 1900, Machine Location: Colorado, 165 Ton, 13oz Cincinnati Injection Moulding Machine, – Maximum mold: 17.9″ height X 16.73″ width, – 230V, 3 ph.

66 Ton, 2.3 oz., Nissei #ES600, injection molding machine, 16" x 13.6" tie bars, toggle clamp, 24" daylight, NC9300T control, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nissei
Model: ES600
Year: 2001
Used Nissei ES600 (2001) Injection Molding Machine for Sale. This toggle clamp machine offers 66 ton clamping capacity with a 2.3 oz shot size, making it suited to small part production. Tie bar spacing measures 16″ x 13.6″, with a clamp stroke of 10.2″, minimum daylight of 6.7″ and maximum ...more

67 Ton, 0.67 oz., Haitian #VEIII-600/80, injection molding machine, 7/8" screw, 14.57" x 14.57" tie bar spacing, 25" daylight, 2023

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: VEIII 600/80
Year: 2023
The Haitian VEIII 600/80 Injection Molding Machine, manufactured in 2023, is a reliable used machine in the plastic machinery category. This horizontal injection molding machine has a clamping force of 67 tons and a shot size of 0.67 ounces, making it suitable for precision and small-scale applications. The screw ...more

67 Ton, 5.1 oz., Tayu #TY-600.S, shuttle table vertical injection molding machine, 2022

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Tayu
Model: TY-600.S
Year: 2022
Voltage: 460/3/60, US Tonnage: 67, Model: TY600.S, Screw Diameter: 36mm, Shot Size (oz): 5.1.

70 Ton, 3.51 oz., Cincinnati Milacron #HC-70, Vertical Clamp Injection Molding Machine, horizontal injection, 12" x 16" platen, 1-1/4" screw, 2003

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Cincinnati Milacron
Model: HC 70
Year: 2003
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #3872), DRIVE TYPE Hydraulic TONNAGE 70 SHOT SIZE OZ. 3.51 SHOT SIZE ...more

70 Ton, 3.8 oz., Nissei #NS60-9A, Injection Molding Machine, 2006, NS60-9A

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nissei
Model: NS60-9A
Year: 2006
Make: Nissei, Model: NS60-9A, Year: 2006, Machine Location: Illinois, Capacity: 70 Ton, Shot Size: 3.8 oz, Tie Bar Spacing: 13.58″ x 13.58″, Platen Size: 19.6″ x 19.6″, Max Daylight: 23.62″, Min /Max Mold Height: 6.7″ / 23.6″, Clamp Stroke: 16.93″, Control: NC9000G Tact ...more

70 Ton, Nissei #TH70EIII-5VE, Vertical Electric Injection Molding Machine, 2021

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Model: TH70EIII-5VE
Year: 2021
Make: Nissei, Model: TH70EIII-5VE, Year: 2021, Machine Location: Upon Request, Capacity: 70 Ton, Shot Size: 1.65 oz, Screw Diameter: 1.02″, Clamping Force: 80 Tons, Clamping Stroke: 9.84″, Mold Thickness: 9.06″/13.78″ (min/max), Maximum Daylight Opening: 23.62″, Tie Bar Clearance: ...more

72 Ton, 2.84 oz., Battenfeld #HM65-Servopower, injection molding machine, 14.57" x 12.6" tie bars, Unilog B6 Control, 2012 (2 available)

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Battenfeld
Model: HM65 SERVOPOWER
Year: 2012
Used Battenfeld HM65 Servopower (2012) Injection Molding Machine for Sale. This 72 ton press has a shot size of 2.84 and tie bar spacing of 14.57″ x 12.60″, with a max daylight of 39.56″ and a minimum/maximum mold height of 8.89″. Machine control is Unilog B6. ejector, Wittmann W702 robot, core ...more

75 Ton, Sumitomo #SE75S, electric injection molder, 22 HP, 2000

Excel Machinery | Clinton Township, MI
Seller: Excel Machinery
Location: Clinton Township, MI
Mfr: Sumitomo
Model: SE75S
Year: 2000
Excel Machinery Marketing has a large selection of used equipment such as Boring Mills, CNC machines, Grinders, Lathes and more from brands such as Blanchard, Bliss Toledo, Durma, Fassler and more. Visit our site to request a quote today.

80 Ton, 3 oz., Newbury #V380RS, rotary molding, 12" x14" platen, Maco 4000 Control, 1993

Nationwide Machinery Sales | Troy, MI
Seller: Nationwide Machinery Sales
Location: Troy, MI
Mfr: Newbury
Model: V380RS
Year: 1993
Model V380RS, Shot size: 3 oz., Platen size: 12" x 14", Stroke: 6.4", Daylight: 20.38", Mold size: 12' x 14", 48" Dia. Rotary Table, Centerline: 3.5"/8", MACO 4000 Control, Light curtains.

83 Ton, 2.8 oz., Sumitomo #SE75DUZ-C160S, horizontal plastic injection molder, 27.95" daylight, 16.14" x 14.17" tie bar spacing, 2011

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Sumitomo
Model: SE75DUZ-C160S
Year: 2011
, 2011 83 Ton Sumitomo SE75DUZ-C160S, All Electric Injection Molding machine, Shot size: 2.8 Oz, Screw diameter: 32 mm, Tie bar spacing: 16.14" x 14.17", Platen size: 22.83" x 20.87", Max. Open daylight: 27.95", Machine in good running conditions. Under power., Comes with grinder and picker., Imperial Metric Tonnage ...more

85 Ton, 5 oz., Cincinnati #Milacron-VT85-5, Plastic Injection Molding Machine, 24 VDC, 1989

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: MILACRON-VT85-5
Year: 1989
Make: Cincinnati, Model: Milacron, Year: 1989, Machine Location: Michigan, 85 TON, 5 OZ Cincinnati Milacron VT85-5 Plastic Injection Molding Machine, 1989, – 85 ton, – 5 OZ shot size, – Control-ACV: 115-60Hz/110-50Hz, other: 24VDC, – Motor ACV: 460V, 3 ph, 50 Hz, – Heaters-ACV: 460V, 3 ...more

85 Ton, 5 oz., Van Dorn #85HT5, Injection Molding Machine, 28" dl, 12" clamp stroke, 16" x 13.6" tie bar spacing, 22.8" x 20.4" platen, Pathfinder 2500 control, 1996

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Van Dorn
Model: 85HT5
Year: 1996
Used Van Dorn 85HT5 (1996) Injection Molding Machine for Sale. This toggle clamp press is rated at 85 ton with a 5 oz shot size. Platen size measures 22.8″ x 20.4″ with tie bar spacing of 16″ x 13.6″. Clamp stroke is 12″, maximum daylight is 28″, and minimum/maximum mold height runs ...more

85 Ton, 6.8 oz., Engel Victory #1350/85, servo-hyd injection molder, tiebarless, 27.56" DL, CC300, 2017

JYC Machinery | Aventura, FL
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Victory
Model: 1350/85
Year: 2017
, 2017 85 Ton Engel Victory 1350/85, Servo-Hydraulic Injection Molding machine, Shot size: 6.79 oz, Screw size: 40 mm, Tie bar spacing: Tiebarless, Platen size: 26.38" x 23.62", Max. Open daylight: 27.56", Control: CC300, Hours: 15,386, Options: 2 hyd corepull, ejector back safety, SPI interface., Machine is in good ...more

88 Ton, 1.72 oz., Arburg #1200T-800-150, rotary table injection molding machine, 47" x 47" platens, Selogica Control, 2001

KD Machinery | Scottsdale, AZ
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Arburg
Model: 1200T-800-150
Year: 2001
Used Arburg 1200T-800-150 (2001) Injection Molding Machine for Sale. This 88 ton press has a 1.72 oz shot size and a Selogica control, with 47″ x 47″ platens and an 11.8″ clamp stroke. Maximum daylight is 21.6″ and minimum mold height is 9.8″. The machine shows 51,042 auto hours. It is a ...more

88 Ton, 2.72 oz., Krauss Maffei #KM-80-220-C2, Hydraulic Injection Molding Machine, 15.94" x 15.94" tie bar spacing, 29.53" daylight, 460 V., 1998

Meadoworks LLC | Schaumburg, IL
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Krauss Maffei
Model: KM 80-220 C2
Year: 1998
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #4932), DRIVE TYPE Hydraulic TONNAGE 88 SHOT SIZE OZ. 2.72 SHOT SIZE ...more