6 Results
Featured
Meka #MBC400, PugMills, Never Used, 2 available
Machinery Scene | Toledo, WA
Category: Pug Mills
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Meka
Model: MBC 400,
Year: 2024
Meka PugMills, Never Used, 2 available, Mixer Type: MBC 400, Production Capacity: 400 T/H, Year made: 2024., Made in: Turkey, Stored inside warehouse., Photos and are available., Freight rates are available.
Featured
Scott PugMill twin shafts continuous mixer, Never Used
Machinery Scene | Toledo, WA
Category: Pug Mills
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Scott
Model: TSM42156
Scott PugMill continuous mixer, Never Used, Model # TSM-42156, Unused Scott Mixer, Scott Equipment Company, Twin shafts, Contact use for additional photos and., Freight rate are available..
Andritz #DA30-21, Stainless twin agitator mixer/pug mill, 30 HP, unused, #14219
JM Industrial LLC | Millwood, WV
Category: Pug Mills
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Andritz
Model: DA30-21
UNUSED Andritz Conditioner Stainless Twin Agitator Mixer Pug Mill Model DA30-21, Andritz Feed and Biofuel Screw Mixer, Model-DA30-21 Series 2 S/N- 132090174-2012, 304 Stainless Steel material contact parts. 6 Additive Ports, Gear Box Assembly With FAZ 107 AD, 30HP, 460 volt, 1765RPM, 3 phase, 60Hz with belt/gear ...more
JUST ADDED!
Meka #MBC400, PugMills, Never Used, 2 available
Machinery Scene | Toledo, WA
Category: Pug Mills
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Meka
Model: MBC 400,
Year: 2024
Meka PugMills, Never Used, 2 available, Mixer Type: MBC 400, Production Capacity: 400 T/H, Year made: 2024., Made in: Turkey, Stored inside warehouse., Photos and are available., Freight rates are available.
Patterson #CK-453, Kneadermaster Stainless Steel Pug Mill, 11" width x 3' L Size, 4.5 gallon capacity, 150 psig @ 338°F, 10 HP, 59-177 RPM, 230/460 V
Perry Videx LLC | Hainesport, NJ
Category: Pug Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Patterson
Model: CK 453
Used Patterson model CK 453 Kneadermaster 316 stainless steel pug mill. Approximately 11" wide X 3' long. 4.5 gallon capacity. 150 psig @ 338F. to -20F. 10 HP, 3 phase, 60 cycle, 230/460 volt. Variable speed 59 to 177 rpm. Flat bolted top cover., PATTERSON-KELLEY CK 453.
JUST ADDED!
Scott PugMill twin shafts continuous mixer, Never Used
Machinery Scene | Toledo, WA
Category: Pug Mills
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Scott
Model: TSM42156
Scott PugMill continuous mixer, Never Used, Model # TSM-42156, Unused Scott Mixer, Scott Equipment Company, Twin shafts, Contact use for additional photos and., Freight rate are available..
Sprout Waldron #40/20, twin screw pugmill mixer, Stainless Steel, 40" wide x 20' long trough, single 25 hp motor drive, #3327-6
Federal Equipment Company | Cleveland, OH
Category: Pug Mills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Sprout Waldron
Model: 40/20
Used Sprout Waldron twin screw pug mill mixer, model DA40-20, stainless steel construction, approximately 40" wide x 20' long trough, dual carbon steel shafts with stainless steel paddles, packing glands, driven by single 25 hp, 575 volt, motor drive, serial# 81-0295.
Get email updates for newly added Pug Mills
Pug Mills (also known as clay mixers or pug mills) are machines used for mixing and kneading materials, typically clay or other wet substances, to prepare them for further processing. Commonly used in industries like ceramics, pottery, and construction, they ensure a consistent, homogeneous mixture by removing air pockets and improving material workability. Pug mills are essential for shaping and refining materials in the production of clay-based products.
Welding Engineers #2010, pug mill extruder, jacketed feed throat & chamber rated 15 psi @ 550°F, 10 HP, 1960, #70768, 1960
Federal Equipment Company | Cleveland, OH
Category: Pug Mills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Welding Engineer
Model: 2010
Year: 1960
Used Welding Engineers pug mill extruder, model 2010, jacketed feed throat and chamber rated 15 psi at 550 f, 10 hp motor drive, 100 rpm screw speed, serial# 2345, built 1960.
