10 Results
CSMI #Hi-Tech, Edger w/Optimizing, Two-saw Edger, Top reman Head & Syste, Infeed, Unscrambler, Scanning & Optimization
Ex-Factory | Charlotte, NC
Category: Board / Wood Edgers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Csmi
Model: HI-TECH
CSMI Hi-Tech Optimized Board Edger. Complete with the following s: -- Two-saw Edger. --Top reman Head and System. --Infeed. --Unscrambler. --Scanning and Optimization. NOTE: Offered earlier at $75,000.
Gauer #5H-36, edger, 36" W x .120" capacity
Diamond Jack Machinery Inc | Fort Smith, AR
Category: Board / Wood Edgers
Seller: Diamond Jack Machinery Inc
Location: Fort Smith, AR
Mfr: Gauer
Model: 5H-36
Gauer 5H-36 Edger, S/N 1283891, Model 5H-36, Capacity 24GA to 11 GA.025” to.120 Thickness, Max width 36”, Approx size 5 W x 30” D x 4’ Tall.
Gauer #5H-40, 40" edger11-24 gauge, 5/8"-48" width, 125 FPM, manual coil adjustment
D & D Industries Inc | Monclova, OH
Category: Board / Wood Edgers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Gauer
Model: 5H-40
MODEL #: 5H-40, SERIAL #: A3941154, 11-24 GA, 5/8" - 40" WIDTH, HOT OR COLD ROLLED STEEL, STAINLESS, COPPER OR BRASS, 0-125 FPM, MANUAL COIL ADJUSTMENT, ENTRY AND EXIT PINCH ROLLS, GOOD CONDITION.
Julius #UNO-80, strip edging/deburring machine, 6 roll/tool positions
National Machinery Exchange | Newark, NJ
Category: Board / Wood Edgers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Julius
Model: UNO-80
JULIUS MDL. UNO 80 STRIP EDGING/DEBURRING MACHINE, MANUFACTURER. JULIUS, TYPE. EDGER, MODEL NUMBER.UNO 80, NUMBER OF ROLL/TOOL POSITIONS. 6 (3 ON EACH SIDE), ELD HP motor, 230-460 vac, 3-Phase @ 50 hz. 1410 RPM., O.A. DIMENSIONS. 4'5" Long X 2'9" Wide X 4'2" High APPROX, WEIGHT. 1,025 Lbs APPROX.
Miner, 4" Edger
Carolina Machinery Sales | Monroe, NC
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Miner
Miner 4” Edger.
Get email updates for newly added Board / Wood Edgers
Board or wood edgers are machines used in woodworking to trim the rough or uneven edges of wood planks, creating straight and uniform sides. These machines help maximize usable wood by precisely cutting along the edges, ensuring consistency and reducing waste. Edgers are essential in sawmills and woodworking shops for preparing boards for further processing or finishing.
Phl Industries #4-Saw, Edger, Independently shifted blades, 48" opening, 2-3/4" cut depth, 125 HP Arbor, 800 linear FPM, 1997
Ex-Factory | Charlotte, NC
Category: Board / Wood Edgers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Phl Industries
Model: 4-SAW
Year: 1997
PHL Edger high speed 4 saw edger; Complete with the following s: --Independently shifted blades. --48″ opening. --2-3/4″ max cut depth. --125 HP Arbor Motor. --Operates up to 800 linear feet per minute. --Infeed Table and Outfeed Table with Picker and Hydraulic Power Unit. NOTE: Removed from service ...more
Reckart Board Edger
Carolina Machinery Sales | Monroe, NC
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Reckart
Reckart Board Edger, 42" x 6" Capacity, No motor - Does have the drive pulleys (had 150 HP previously), (3) Stationary Saws and two sliding.
JUST ADDED!
Ligna, 2-saw Edger, 6" x32", infeed & tailing belt
Carolina Machinery Sales | Monroe, NC
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Ligna 6" x 32" 2-saw Edger, 2-Moveable Saws, 8' Infeed rollcase, 20' Tailing belt, Hydraulic setworks, 2-Line laser system, The first photos shown are of the system installed. The resaw has been dismantled and ready to load, as shown in the last photos.
TS, Manual Edger, 75 HP, 4" max thick, 30" max width
Carolina Machinery Sales | Monroe, NC
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
TS Machinery Manual Edger includes: Infeed lumber deck, landing table, and return roll case., 75 hp., 4” max thickness., 30” max width, System has already been removed from service and is ready to load.
Valley, 2 Blade Edger, 480 V., outfeed rollers
Carolina Machinery Sales | Monroe, NC
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Valley 2 Blade Edger, 1 Fixed, 1 Moveable Blade, 24" Wide, Will Cut Up To 3" Thick, 20hp, 480V, New Mandrel and Mandrel Bearings, New Outfeed Rollers.
