1 - 50 of 147 listings
Featured
LNS #Sprint-565-S2, bar feeder, 190" bar length, 2022
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Lns
Model: SPRINT-565-S2
Year: 2022
Inventory No. 0526-064-0044 Manufacturer Lns Model No. SPRINT 565 S2 Name Bar Feeder Arrival Date 06-01-2026 Dimensions L x W x H (inches) 198 x 40 x 66 Capacity 190" Electrical 3/50/60/200-480 Weight (lb.) 2480 Category CNC Condition Used Available Quantity 1 Serial No. 241452 Make Year 2022 Item Made In Switzerland.
Alpine #542S45L2A, tornado bar loader / feeder, GE Fanuc PLC, #69122
Yoder Machinery Sales | Holland, OH
Category: Bar Feeders and Loaders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Alpine
Model: 12 X 1-5/8
SERIAL. 00899255, MODEL. 542S45L2A, TYPE. TORNADO, BAR CAPACITY. 1/4" TO 1-5/8", BAR LENGTH. 14'1-1/4" MAXIMUM, BAR CHANGE TIME. 25 SECONDS, CONTROL. GE FANUC PLC.
AMD, 20' bar & pipe descrambler rack & loader
National Machinery Exchange | Newark, NJ
Category: Bar Feeders and Loaders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Amd
20' AMD BAR & PIPE DESCRAMBLER RACK & LOADER.
ATS #ML-565, automatic barfeed, 2.6" bar round cross section, 60" length, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Ats
Model: ML-565
Year: 2011
ATS ML565 Auto Barfeed (subject to buyer verification):Scope of application: Bar dimensionBar round cross section: 6 to 67mm / 2.6”Bar hexagonal cross section: 8 to 58mmBar square cross section: 8 to 47mmBar weightMaximum weight of the loaded bar 60 kgBar lengthMaximum length of the bar handled by the barfeeder ...more
ATS #ML-580, automatic barfeed, .25" to 3-1/8" bar round capacity, 3-8" to 2.5" bar hexagon, 3/8" to 2-1/8" bar square, 2014
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Ats
Model: ML-580
Year: 2014
ATS ML580 Automatic Barfeed (subject to buyer verification):Bar Round Capacity.25” to 3 1/8”Bar Hexagonal 3/8” to 2.5”Bar Square 3/8” to 2 1/8”Max Weight of Per Loaded Bar 132 lbsMax Length of Bar Handled by BF 60”Current Max Length is 42″Pusher StrokeDesign Stroke ...more
ATS #ML-580, magazine type bar loaders, 3.1496" capacity, 5' bar length, 2015
JYC Machinery | Aventura, FL
Category: Bar Feeders and Loaders
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Ats
Model: ML-580
Year: 2015
, Unit in good operating Conditions, Imperial Metric Capacity 3.1496" 80 mm Bar Length 5' 1.5 m.
Get email updates for newly added Bar Feeders and Loaders
Bar Feeders and Loaders (also known as bar loading systems or bar stock feeders) are devices designed to automatically feed bar stock into lathes or other machining equipment. Commonly used in industries like automotive, aerospace, and manufacturing, these systems improve production efficiency by reducing manual handling and enabling continuous operation. Bar feeders and loaders are essential for high-volume machining, ensuring precision, consistency, and streamlined workflows.
Autobar #400, Servo bar feeder,.25"-4" bar capacity, 60" bar length, 28"-58" height adjustment
R.A.B. Industries Inc | Washington, MI
Category: Bar Feeders and Loaders
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Autobar
Model: 400
Year: 1996
1-USED AUTOBAR 400 SERVO BAR FEEDER, MACHINE SERIAL NUMBER 099, DATE OF MFG. 12/1996, STK#103503, ======================================================, WHILE OBTAINED FROM SOURCES DEEMED, RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE, AND TO VERIFICATION BY BUYER.
Bestline #AL-500SX, power feed & power draw bar, table feed, 4-160 RPM, 110V
Myers Technology Co LLC | Elk Grove Village, IL
Category: Bar Feeders and Loaders
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Bestline
Model: _UNKNOWN_
Power Feed & Power Draw Bar, Table feed, power feed, Model AL-500SX, Speed range 4-160 RPM, Rapid speed 200 RPM, Voltage 110V, 50/60Hz, 1 phase, Torque Ave. 150, Maximum torque 650 In-. lbs., Installation extra $150.00, Ext Shaft Kit w/ dial, shaft and braket, to restaore full travel after $155.00, Shaft install ...more
JUST ADDED!
Iemca Boss #545/37, Bar Feed, 3/16"- 1-5/8" diameter, 146" L
Wheeler Machinery Sales | Pomona, CA
Category: Bar Feeders and Loaders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Boss
Model: 545/37
Iemca Boss545/37 Bar Feed 5mm- 42mm (3/16"- 1-5/8") #6494 #2, BARSTOCK DIAMETER: (ROUND)5mm - 42mm (3/16" to 1-5/8"), BARSTOCK LENGTH: MAX.146", FEEDING SPEED: 1770 IPM 1770 IPM 1770 IPM, RETURN SPEED: 1860 IPM, LOADED MAGAZINE CAPACITY: 11 LINEAR INCHES, WORKING AXIS HEIGHT: 35" - 47" ADJUSTABLE, OPERATING VOLTAGE: ...more
Citizen #CAV20L2E, Magazine Bar Loader, unused, 2026
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Citizen
Model: CAV20L2E
Year: 2026
2026 CITIZEN CAV20L2E Magazine Bar Loader - NEW IN CRATE NEVER USED - for Citizen L20E Type VIII, X, XII - 2M8, 2M10, 2M12 Swiss Type CNC Lathes., ENGINEERED EXCLUSIVELY FOR CINCOM CNC SWISS-TYPE LATHES, Perfectly configured to the speeds, torque, power and axis movements of Cincom machines allowing it to respond with ...more
JUST ADDED!
Citizen #CAV32-IS, magazine bar loader, 1.26" capacity, 12' bar length, 2011
Machinery Resources Intl | Simi Valley, CA
Category: Bar Feeders and Loaders
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Citizen
Model: CAV32-IS
Year: 2011
2011 CITIZEN CAV32-IS Magazine Barloader, used. s include 1.2598" capacity, 12' bar length, and channel sets of 7mm, 12mm, and 32mm. Ideal for Citizen configurations. Perfect for those needing reliable bar loading solutions., 2011 CITIZEN CAV32IS, Originally configured for a Citizen, Channel sets included 7mm ...more
JUST ADDED!
Edge #Rebel-102, bar feed, 2018
Meadoworks LLC | Schaumburg, IL
Category: Bar Feeders and Loaders
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Edge
Model: REBEL-102
Year: 2018
Edge Rebel 102 Barfeed, New in 2018, S/N: 71201833448. Located in Brownsburg, IN.
Edge Fmb Edge/FMB #Turbo-5-65V, Magazine Type, 2.5" Dia, 12' 6" Lgth, Hand Held Control, Misc Collets, Left-hand Feed, LOW USE, 2019
A Green Co Inc | Worcester, MA
Category: Bar Feeders and Loaders
Seller: A Green Co Inc
Location: Worcester, MA
Mfr: Edge Fmb
Model: TURBO 5-65V
Year: 2019
1-(used) Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, New 2019., Bar diameter. 5mm to 67mm (0.196” to 2.637”), Max. bar length. 3,800mm (150"), Magazine rack capacity. 279.4 mm (11"), Magazine rack angle (adjustable). 6° - 20°, Max. remnant length. 530mm (20.8"), Bar loading cycle ...more
Edge Technologies #FMB-Turbo-565, bar feeders, 2.5" diameter, 12.5" length, 2022
Used CNC LLC | Huntley, IL
Category: Bar Feeders and Loaders
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Edge Technologies
Model: FMB-TURBO-565
Year: 2022
EDGE TECHNOLOGIES FMB TURBO 5-65 Bar Feeder, 2022 model in used condition. s a 2.5" capacity and 12.5' bar length, ideal for efficient operations., 2022 EDGE TECHNOLOGIES FMB TURBO 565, Capacity. 2.5", Bar Length. 12.5'.
JUST ADDED!
Edge Technologies #Minuteman-320-SE, Magazine Type Bar Loader, 12' bar length, 1.023" capacity, axial shift, 2023
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Edge Technologies
Model: MINUTEMAN-320-SE
Year: 2023
Edge Technologies #Minuteman-320SE, magazine bar loader, 9' 4" overall, 1.062" bar capacity, 6' bar length, 10" rack capacity, 2014
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MINUTEMAN-320SE
Year: 2014
EDGE MINUTEMAN″20SE MAGAZINE BARFEEDNEW: 2014 :BAR DIAMETER CAPACITY. (3mm-26mm)0.118"-1.062"BAR LENGTH. 6'MINIMUN BAR LENGTH.″9.4"MAXIMUM REMNANT LENGTH. 16.5"MAGAZINE RACK CAPACITY. 10"APPROX. MACHINE WEIGHT. 1300 LBS. OVERALL LENGTH 9'4".
Edge Technologies #Miyano-M-542, magazine bar feed, 1.26" diameter, 12' length, 2021
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MIYANO-M-542
Year: 2021
EDGE TECH MIYANO 542 MAGAZINE BARFEED NEW: 2021 ** HAS NEVER BEEN USED ** This barfeed has never had any bars installed in it for use. It was purchased to be used on a Miyano BNA-42GTY Direct From OEM Brochure: Power consumption: 2 KWFeed force: adjustable, max. 450 N (101 lbf)Forward feed rate: adjustable 750 mm/sec ...more
Edge Technologies #Patriot-338, Magazine Type Bar Loader/Feeder, 12'-5" max. bar length, 12" magazine capacity, 0.118"-1.653" bar diameter, 2 HP, 230 Volt, 3PH, 2018
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Edge Technologies
Model: PATRIOT 338
Year: 2018
2018Edge Patriot 338 Magazine Bar Feeder by EDGE TECHNOLOGIES. Fixed or sliding headstock lathes, Supports 3mm-42mm bars with 12 linear inches magazine capacity. s quick-change guide channels, hydrodynamic support, and dual anti-vibration devices. Max pusher torque: 450 N., Bar diameter capacity: 3mm to 42mm (0.118 to ...more
Edge Technologies #Patriot-551, magazine type bar loaders, 2.0079"cap., 12' bar length, 2021
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2021
EDGE Patriot 551 Magazine Bar Loader (used) New 2021 - used on a fixed headstock CNC Lathe w/ 2 channel sets, 5mm to 51mm, 12' bars, barely used, like new condition. Great Deal! Capacity 2.0079" Bar Length 12'.
Edge Technologies #Patriot-551, Magazine-Type Bar Loader, 2" capacity, 96" Bar length, 16" max Remnant length, 12" Magazine Rack capacity, 1.5 kW, 230 V, 2011
Toolquip Inc | Lebanon, OH
Category: Bar Feeders and Loaders
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2011
Used Magazine type bar loader, used condition. s a bar capacity of 2" and length up to 8'., Bar Capacity, No Prep: 5mm to 44.5mm (.196" to 1.75"), With Prep: 5mm to 51 mm (.196" to 2.000"), Maximum Bar Length: 8', Minimum Bar Length: 39.4", Maximum Remnant Length: 16", Magazine Rack Capacity: 12", Bar Loading ...more
Edge Technologies #Patriot-551, automatic bar loader, 2" capacity, 8' bar length, 2011
Machinery Resources Intl | Simi Valley, CA
Category: Bar Feeders and Loaders
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2010
Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011, Can load up to 8' bars, 45mm channel installed, To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm ...more
Edge Technologies #Rebel-80, bar feed, .315"-3.150" round diameter, 60" bar stick length, 2020
Harris Machine Tools, Inc. | Houston, TX
Category: Bar Feeders and Loaders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Edge Technologies
Model: REBEL-80
Year: 2017
2017 EDGE Rebel 80, Capacity. 3.15", Bar Length. 5', Control. CNC.
Edge Technologies #Rebel-80, barfeed, .315" to 3.150" bar diameter, 60" bar length, 30" magazine rack capacity, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-80
Year: 2022
Edge Technologies Rebel 80 Barfeed (subject to buyer verification):Bar diameter capacity 8mm to 80mm (.315” to 3.150”)Maximum bar length 60” (NOT TO EXCEED SPINDLE LENGTH)Magazine rack capacity 30” (60 ½” bars, 30 1.0” bars, 15 2.0” bars)Bar weight 175 lbs. per bar not ...more
Edge Technologies #Rebel-80, servo bar feed, 0.315" diameter, 3" bar, 2020
Clark Machinery Sales LLC | Hunt Valley, MD
Category: Bar Feeders and Loaders
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Edge Technologies
Model: REBEL-80
Year: 2020
2020 EDGE TECHNOLOGIES REBEL 80 SERVO, Capacity. 3.15", Bar Length. 3', Weight. 1100 LBS, RIGHT SPINDLE LINER - EXTENDED TYPE - 2.380" DIAMETER, X-AXIS AXIAL SHIFT, (1) PUSHER LENGTH FOR PART VARIANCE WITH RUBBER ID GRIPPER, EXTENDED V-TRAY TO REACH BACK OF RIGHT-SPINDLE, COOLANT PAN IN V-TRAY AREA FOR EXCESSIVE ...more
Edge Technologies #Rebel-102-Servo, Barfeed, 8-102mm bar diameter, 60" L bar, 30" magazine capacity, 20 sec. cycle time, 2020
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-102-SERVO
Year: 2020
Edge Technologies Rebel 102 Servo Automatic Barfeed (subject to buyer verification):Bar diameter capacity: 8 mm to 102 mm (.315” to 4.000”)Maximum bar length: 60” (Not to exceed spindle length)Magazine rack capacity: 30” (762 mm)Bar loading cycle time: 20 secondsPower consumption: 1 kW – ...more
Edge Technologies #Rebel-EcoFeed-V65LE, automatic barfeed, .19"-2.56" bar diameter, 61" bar length, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-ECOFEED-V65LE
Year: 2021
Edge Technologies Rebel-V65LE Automatic Barfeed – 2021 (subject to buyer verification):Diameter of Bar:.19” – 2.56”Length of Bar: Max 61” (Will depend on Spindle Length)Spindle Height: 36”-51”Weight: 617 lbs (subject to buyer verification):Control.
Edge Technologies #V-65E-CE-A, magazine type bar loader
iGAM | Detroit, MI
Category: Bar Feeders and Loaders
Seller: iGAM
Location: Detroit, MI
Mfr: Edge Technologies
Model: V-65E-CE-A
EDGE TECHNOLOGIES V-65E-CE-A Magazine Type Bar Loader for sale, used condition. Ideal for enhancing manufacturing efficiency. Quality build suitable for various industrial applications. Contact us for more., Spec Sheet, EDGE TECHNOLOGIES V-65E-CE-A, Dimensions. 67X45X47, Weight. 604 LBS.
Edge Technologies Servo Unloader Rebel 80
MRO Exchange | Fairfield, IL
Category: Bar Feeders and Loaders
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Edge Technologies
Used in CNC turning cells sub-spindle lathes, the Edge Technologies Rebel 80 Servo Unloader is a compact, servo-driven part extraction and conveyance system designed to automatically remove finished parts from the sub-spindle of single-spindle CNC lathes. The unit accepts parts ranging from 8 mm to 80 mm (0.315 in. to ...more
Fab Machinery #Turbo-5-55/3800/A, Bar Feeder, hydraulic unit, FMB Controller, 2007
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Fab Machinery
Model: TURBO-5-55/3800/A
Year: 2007
Inventory No. 0526-057-0001 Manufacturer Fmb Machinery Model No. TURBO 5-55/3800/A Name Bar Feeder Arrival Date 05-27-2026 Dimensions L x W x H (inches) 210 x 40 x 59 Weight (lb.) 4265 Category CNC Condition Used Available Quantity 1 Serial No. 07-290 101/R-569 607 Make Year 2007 Item Extra Tooling, Hydraulic Unit ...more
FMB #Mini-Turbo, bar feeder, #69120
Yoder Machinery Sales | Holland, OH
Category: Bar Feeders and Loaders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Fmb
Model: MINI-TURBO
FMB #SL-80, short magazine bar feed, 3" diameter, 48" length, 2001
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Fmb
Model: SL-80
Year: 2001
FMB SL-80 Short Magazine Bar FeedNew: 2001….
FMB #SL-80S, Short Bar Feeder, 3-1/8" max bar diameter, 47" bar length, 2017
Aucto | San Francisco, CA
Category: Bar Feeders and Loaders
Seller: Aucto
Location: Villa Rica, GA
Mfr: Fmb
Model: SL-80S
Year: 2017
The FMB SL-80S/1200A is an automatic short bar feeder system engineered for precise material delivery to CNC lathes. It accommodates bar stock with a maximum diameter of 80 mm. The system is designed to manage bar lengths up to 1200 mm, ensuring consistent feeding for machining operations. This model typically s a ...more
FMB #TURBO-5-55, Magazine Bar Feeder, 3/16" - 2-3/16" bar diameter, 6' bar length, 2016
Aucto | San Francisco, CA
Category: Bar Feeders and Loaders
Seller: Aucto
Location: Villa Rica, GA
Mfr: Fmb
Model: TURBO 5-55
Year: 2016
The Fmb Turbo 5-55 is a bar feeder designed for automated material handling. It accommodates bar diameters ranging from 5 mm (0.197 inches) to 55 mm (2.165 inches), with a specified maximum capacity of 2 inches. The feeder supports bar lengths up to 6 feet. Its design incorporates two distinct sets of guiding channels ...more
FMB #Turbo-2-20, magazine type bar loader, 0.7874" capacity, 12' bar length, 2022
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-2-20
Year: 2022
FMB Turbo 2-20 Magazine Bar Loader (used) New 2022 - used on a Swiss Type CNC sliding headstock lathe. Comes with (2) channel sets., 2022 FMB TURBO 2-20, Capacity. 20 mm, Bar Length. 12'.
FMB #Turbo-3-36, Magazine Bar Loader, w/Integrated FMB/EDGE Bundle Loader, 2017
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-3-36
Year: 2017
Ultimate production / Lights Out Package - FMB Turbo 3-36 Magazine Bar Loader w/Integrated FMB/EDGE Bundle Loader New 2017. 3mm to 36mm x 12' bar capacity. Used on Swiss sliding headstock CNC Lathes (also for chucker convertible Swiss). $75K package when new - save money - only a fraction of the new price., 2017 ...more
FMB #Turbo-5-42/4200, 12' magazine barfeed, 5-42mm, collets, S/N 37-110-270, #UD1000
Machinery Solutions Inc | Lexington, SC
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Fmb
Model: TURBO-5-42/4200
FMB #Turbo-5-55, Magazine Bar Loader, 2.56" bar
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-5-55
Year: 2018
FMB Turbo 5-55 Magazine Bar Loader (used) Like New - Barely used - Excellent Condition - 5mm to 55mm bar capacity x 12; bar lengths, with 51mm channel set. CAN BE CONVERTED TO 65MM MAX CAPACITY!, 2018 FMB TURBO 5-55, Capacity. 65 mm, Bar Length. 12', Control. CNC.
FMB #Turbo-555/2200, bar feed, .197"-2.17" bar diameter, 19.7"-86.6" bar length, digital Control, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Fmb
Model: TURBO-555/2200
Year: 2011
FMB Turbo 555/2200 Barfeed (subject to buyer verification):Bar Length Capacity: 500–2200 mm (19.7″–86.6″)Maximum Bar Diameter: 55 mm (2.17″)Minimum Bar Diameter: 5 mm (0.197″)Feed Speed: Variable, 0–700 mm/secReturn Speed: Up to 1000 mm/secFeed Force: Up to 750 NLoading Time: ...more
FMB #Turbo-8-80, magazine bar loader, 3.1496" cap., 12' bar length, 2008
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Fmb
Model: TURBO-8-80
Year: 2008
Brand FMB Model TURBO 8-80 ID # 626435 Type Magazine Type Bar Loaders Condition Used - Good Year 2008 Location United States, FMB Turbo 8-80 Magazine bar loader (used) New 2008 - for 6mm to 80mm x 12" bars. Misc channel sets. Capacity 3.1496" Bar Length 12'.
Grindley, Hydrodynamic Bar Feed System, 1750 RPM, 230/460 V
HGR24 | Euclid, OH
Category: Bar Feeders and Loaders
Seller: HGR24
Location: Euclid, OH
Mfr: Grindley
Inventory No. 1225-079-0006 Manufacturer Grindley Name Hydroynamic Bar Feed System Arrival Date 01-09-2026 Dimensions L x W x H (inches) Unavailable Electrical 3/60/230/460 Weight (lb.) 1125 Category CNC Condition Used Available Quantity 1 Item 1750 Rpm, 27x16x17 Tank, Made In Usa, (120#) 28x18x28, (640#) 217x21x9 ...more
Haas #BAR-48A-Servo-300, bar feed, .375"-3.125"bar capacity, 60" bar length, 2012
Machinery Network Inc | Encino, CA
Category: Bar Feeders and Loaders
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: BAR-48A-SERVO-300
Year: 2012
Bar Cap. 0.375 - 3.125, Max. Bar Length 60, Max. Number of Bars 30 at 1 Diameter, Floor Space 99 x 55 x 54, Machine Weight 1,300 lbs.
Haas #BAR-300, 60" length, 0.25"-3.125" diameter, 2000
FMI Trading LLC | Vinton, TX
Category: Bar Feeders and Loaders
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Haas
Model: BAR-300
Year: 2000
Product Information, CNC Lathes Diameter:0.25" - 3.125" Year:2000 Weight:1,500.00 Dimensions:64" x 96" x 55" ::Length: 60", Product Code: 03040151024 Make: Haas Model: BAR 300 Serial Number: 90255 Condition: Used.
JUST ADDED!
Haas #Bar-Feeder, Bar Feeder, 0.375"-3" diameter, 48" bar L, 2016
KD Machinery | Scottsdale, AZ
Category: Bar Feeders and Loaders
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Haas
Model: BAR FEEDER
Year: 2016
Used Haas Bar Feeder (2016) Other Equipment for Sale. This Haas bar feeder handles a bar diameter range of 0.375 in to 3.00 in, with a bar length capacity of 48 in and a recommended maximum bar in spindle of 48 in. Minimum bar length is 10 in. It is a practical add-on for shops running unattended turning work and ...more
JUST ADDED!
Haas #Bar-Feeder, Bar Feeder, 2015
KD Machinery | Scottsdale, AZ
Category: Bar Feeders and Loaders
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Haas
Model: BAR FEEDER
Year: 2015
Haas Bar Feeder.
Haas #Bar-300, Servo bar feed, 3.125" dia., 2000
Chrisgo Equipment Co., Inc. | Milford, OH
Category: Bar Feeders and Loaders
Seller: Chrisgo Equipment Co., Inc.
Location: Milford, OH
Mfr: Haas
Model: BAR-300
Year: 2000
Haas #Servo-300, magazine type bar loader, 3.125" capacity, 48' bar length
Silverlight CNC | Barrington, IL
Category: Bar Feeders and Loaders
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Haas
Model: SERVO-300
Year: 2013
HAAS SERVO 300 magazine type bar loader from 2013. Used condition with 3.125" capacity and 48' bar length. Ideal for enhancing machining efficiency. Quality manufacturing from HAAS ensures performance., 2013 HAAS SERVO 300, Capacity. 3.125", Bar Length. 48'.
Haas #Servo-Bar-300, barfeed, 3/8"-3" diameter, 10"-48" length, chamfer, 2025
CJM Machinery Sales Inc | Zurich, ON
Category: Bar Feeders and Loaders
Seller: CJM Machinery Sales Inc
Location: Zurich, ON
Mfr: Haas
Model: SERVO-BAR-300
Year: 2025
3/8″”- 3″ bar capacity, 48″ max. bar length, 10″ min. bar length. c/w plug and play capabilities, barfeed interface directly to Haas control, built- in bar chamfer device, miscellaneous barfeeder accessories. 2025. As New!.
Haas #Servo-Bar-300, bar feed, up to 60" bar length, 3-1/8" bar diameter, 2009
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: SERVO-BAR-300
Year: 2009
Haas Servo Bar 300 Barfeed, Max Bar Length Up to 60″, Max Number of Bars 30 at 1″ Diameter, Control Haas, Bar Diameter Capacity 3-1/8″, Approximate Machine Dimensions: 99.00″L x 55.00″W x 54.00″H, Approximate Weight: 900.00 lbs., This barfeed is only compatible with a SL30 or TL25.
Haas #Servo-Bar-300, CNC bar feeder, 60" length, .25" - 3.125" bar capacity, 2000
Machnet | Santa Monica, CA
Category: Bar Feeders and Loaders
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: SERVO-BAR-300
Year: 2000
Haas Servo Bar 300, Haas Servo Bar 300 CNC Bar Feeder, New: 2000, Bar Length: 60", Bar Capacity:.25" - 3.125", Dimensions: 104" x 56" x 68".
Haas #Servo-Bar-300, barfeeder, 3-1/8" bar capacity, 60" lgth, 30 max bars @ 1" diameter, 2007
CJM Machinery Sales Inc | Zurich, ON
Category: Bar Feeders and Loaders
Seller: CJM Machinery Sales Inc
Location: Zurich, ON
Mfr: Haas
Model: SERVO-BAR-300
Year: 2007
3 1/8″ bar capacity, 60″ length, max. number of bars is 30 at 1″ dia., brushless type interface cables & alignment plates. 2007..
JUST ADDED!
Haas #V2, automatic bar feeder, .375"-3" dia., 48" length, 2025
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: V2
Year: 2025
Haas Barfeeder V2 Automatic Barfeed (subject to buyer verification):BAR CAPACITIESBar Diameter Range (varies w/lathe model)0.375” to 3.00”Bar Length Capacity48”Recommended Max Bar” Spindle48”Minimum Bar Length10”CHARGING TRAYTray Capacity 30 EA x 1”Staging Area ...more
