For Sale by Kevins Equipment Co. KEC
Surplus Record Dealer Since 1995
Layne Sailer
713-69...> Show Seller's Phone Number 713-694-1790 Let the seller know you found their listing on Surplus Record!
Description
Description
Cut Capacity: 1-1/2 (38mm) Genuine Cut
1-3/4 (45mm) Severance
1 (25 mm) Pierce Capacity
Output Current: 30-120 Amps, Adjustable
Input Power: 208-230/460 VAC, 3ph, 50/60Hz,
78/74/37 Amps
220/380-415 VAC, 3ph, 50/60Hz,
75/44/40 Amps
Duty Cycle: 60% @ 120A, 100% @ 100A
Dimensions: Length 35 (889mm)
Width 24.5 (622mm)
Height 45.4 (1153mm)
Weight: 275 lbs. (126 kg)
Ship Weight: 377 lbs. (171 kg)
Panel Controls: On/Off Switch, Run/Set/Latch Switch,
Output Current Potentiometer
Panel Indicators: AC Power, DC Output, Temperature,
Gas Pressure
Work Cable: 20 ft. (6.1m) (includes clamp)
Input Power Cable: Refer to Following Options
Plasma Gas: Air, Nitrogen, Argon/Hydrogen
Pressure: 65 psi (4.5 bar)
Flow: 45-85 scfh (21-40 lpm)
Secondary Gas: Air, Carbon Dioxide, Nitrogen
Pressure: 60 psi (4.1 bar)
Flow: 340 scfh (160 lpm)
Total Flow: 426 scfh (200 lpm) Max.
Gas Supply
Connections: Inert B on rear panel
(plasma and secondary shop
air filter/regulator with Y
hose provided)
Pilot: Electrode to Tip
Control: Hand Torch Switch, Hand Pendant,
or Interface Cable
Torch Configurations
Torch: PCH/M-120
Hand: 70 or 90 Head
25 ft. (7.6m) or 50 ft. (15.2m) Leads
Machine: 180 Head
25 ft. (7.6m) or 50 ft. (15.2m)
Shielded Leads
Warranty: Limited Warranty; 2 yr. Power Supply,
1 yr. Torch
Certifications: IP-23C (water test), CSA,
Cut Capacity: 1-1/2 (38mm) Genuine Cut
1-3/4 (45mm) Severance
1 (25 mm) Pierce Capacity
Output Current: 30-120 Amps, Adjustable
Input Power: 208-230/460 VAC, 3ph, 50/60Hz,
78/74/37 Amps
220/380-415 VAC, 3ph, 50/60Hz,
75/44/40 Amps
Duty Cycle: 60% @ 120A, 100% @ 100A
Dimensions: Length 35 (889mm)
Width 24.5 (622mm)
Height 45.4 (1153mm)
Weight: 275 lbs. (126 kg)
Ship Weight: 377 lbs. (171 kg)
Panel Controls: On/Off Switch, Run/Set/Latch Switch,
Output Current Potentiometer
Panel Indicators: AC Power, DC Output, Temperature,
Gas Pressure
Work Cable: 20 ft. (6.1m) (includes clamp)
Input Power Cable: Refer to Following Options
Plasma Gas: Air, Nitrogen, Argon/Hydrogen
Pressure: 65 psi (4.5 bar)
Flow: 45-85 scfh (21-40 lpm)
Secondary Gas: Air, Carbon Dioxide, Nitrogen
Pressure: 60 psi (4.1 bar)
Flow: 340 scfh (160 lpm)
Total Flow: 426 scfh (200 lpm) Max.
Gas Supply
Connections: Inert B on rear panel
(plasma and secondary shop
air filter/regulator with Y
hose provided)
Pilot: Electrode to Tip
Control: Hand Torch Switch, Hand Pendant,
or Interface Cable
Torch Configurations
Torch: PCH/M-120
Hand: 70 or 90 Head
25 ft. (7.6m) or 50 ft. (15.2m) Leads
Machine: 180 Head
25 ft. (7.6m) or 50 ft. (15.2m)
Shielded Leads
Warranty: Limited Warranty; 2 yr. Power Supply,
1 yr. Torch
Certifications: IP-23C (water test), CSA,
Get Your Price from Kevins Equipment Co. KEC!
Buyers Who Viewed This Listing Also Viewed …
Thermal Dynamics #Master-Pak-50, Plasma Cutting System, 1/2" Cut capacity, 24' Torch Lead, 90 deg. PCH/M-75 Torch, 1 & 3 Phase, 208-460 V
Category: Plasma Cutters/Punches
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Thermal Dynamics
Model: MASTER PAK 50
Thermal Dynamics ‘Master Pak 50’ Plasma Cutting System, Inventory # 3750, Model: Master Pak 50, S/N: M32B35A186401B, Made in USA, PCH/M-75 Torch: 90°, Cutting Capacity: 1/2″, Amperage: 1ph -33-15; 3ph 15-7, Input: 208v-460v, Phase: Single / Three, 70% Duty Cycle, Equipment Included:, Torch Lead ...more
Thermal Dynamics #Pak-Master-150XL, plasma machine w/hand held torch
Category: Plasma Cutters/Punches
Seller: Kingdom Equipment & Consulting Inc
Location: New Boston, TX
Mfr: Thermal Dynamics
Model: PAK-MASTER-150XL
JUST ADDED!
Thermal Dynamics #Auto-Cut-200XT, plasma cutting power supply, Air, Argon-Hydrogen, Nitrogen, Oxygen, 2024
Category: Plasma Cutters/Punches
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Thermal Dynamics
Model: AUTO-CUT-200XT
Year: 2024
Rated Output: 200 A, Duty Cycle: 100% @ 40 kW, Gas Type: Air, Argon-Hydrogen, Nitrogen, Oxygen, Input Voltage: 480V, Output Voltage: 170V, Phase: 3, Dims: 31.8" x 45" 68", Weight 619 Lbs.
Thermal Dynamics TorchMate #X, plasma table, 8' 6" x 16' 2" table, new plasma cutter
Category: Plasma Cutters/Punches
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Thermal Dynamics
Model: X
The exact dimensions of the table are, 8' 6"X16' 2"., It has a brand new plasma cutter., Computer system is thermodynamics cad and is super user friendly., Comes with computer and monitors., Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued ...more
Thermal Arc #PAK5XT, Plasma Cutter
Category: Plasma Cutters/Punches
Seller: Genemco
Location: Hearne, TX
Mfr: Thermal Arc
Model: PAK5XT
Thermal Arc Plasma Cutter. Model: PAK5XT.
