Kevins Equipment Co. KEC
Houston, TX 77022
Platinum Level Dealer
Surplus Record Dealer Since 1995
Contact
About
KEC Incorporated specializes in all your welding equipment needs. We buy, sell, trade and rent new and used welding positioners, welding turning rolls, welding manipulators and welding machines.Products & Services
- Welding Equipment
- Welding Manipulators, Positioners, & Turning Rolls
155 listings in 35 categories
4-Roll Plate Bending Machines
1 Result
120" x 1/2" Bertsch #9, 4-roll hydraulic plate roll with NC control, overhead support, side support, 2015
Category: 4-Roll Plate Bending Machines
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Bertsch
Model: 9
Year: 2015
BERTSCH No. 9 10' x 1/2" 4 Roll Plate Roll, manufactured in 2015. This used plate roll offers robust capabilities for your rolling needs.
12 gauge x 8' Dreis & Krump #SB-812, Hand Brake, 16 gauge stainless steel capacity
Category: Apron and Hand Brakes
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Dreis & Krump
Model: SB 812
Designed for accurate and economical bending of standard and special design forms. Ideal for bending mild steel with a 1-inch minimum flange to the rated capacity of the machine (Cap. Mild Steel 12 GA. and 16 GA. Stainless). Capable of 1/4 inch reverse bends on lighter material.
3/16" x 8' Chicago #PB8187, powered straight brake, excellent
Category: Apron and Hand Brakes
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Chicago
Model: PB8187
CHICAGO 8' X 3/16" POWERED STRAIGHT BRAKE.
450 Amps, Miller #Deltaweld-452, with dual wire feeders, 8 just in
Category: Arc Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: 903255/300620
Miller Deltaweld 452 Welding Machine w/ 70 series Dual feeder; new 400 amp guns; new gas hoses, 25' long work cable w/ ground clamp; new gas regulator.
600 Amps, Miller #Gold-Star-652 stick gauge machine, (32 ea.)
Category: Arc Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: GOLDSTAR 652 903402
MILLER GOLD STAR 652 STICK AND TIG WELDING MACHINES.
Miller #Deltaweld-452 packages with dual 70 Series feeders, turn key, excellent
Category: Arc Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: DELTAWELD 452
INCLUDES:, 2 EA. NEW 400 AMP MIG GUNS, GAS REGULATOR,.035/.045 FEED ROLLS, NEW GAS HOSES, NEW GROUND CABLE AND CLAMP, ALL CABLES INCLUDED.
Miller #MaxStar-700, welding machine, serial # MF310144L, excellent condition
Category: Arc Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: MAXSTAR 700
Overview, Type: WELDING MACHINES, STICK Manufacturer: Miller Electric Model: Maxstar 700 Condition: Excellent Stock #: 2009273 Status: For Sale Serial #: MF310144L.
Miller #XMT450 machines with D-74DX dual feeder, turn key package, excellent
Category: Arc Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: XMT450
INCLUDES:, 2 EA. NEW 400 AMP MIG GUNS, GAS REGULATOR,.035/.045 FEED ROLLS, NEW GAS HOSES, NEW GROUND CABLE AND CLAMP, ALL CABLES INCLUDED, CART FOR THE FEEDER.
Jetline, 10' side beam w/option to be rigged out w/full Lincoln welding package
Category: Beam Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Jetline
JETLINE 10' SIDE BEAM W/ OPTION TO BE RIGGED OUT W/ FULL LINCOLN WELDING PACKAGE.
Lincoln #LSB, 6' side beam w/rigged out w/full Lincoln welding package, height adjustable
Category: Beam Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Lincoln
LINCOLN 6' SIDE BEAM W/ RIGGED OUT W/ FULL LINCOLN WELDING PACKAGE.
Bed and Knee Milling Machines - Vertical
1 Result
Alliant #RT2, vertical milling machine, 9" x42" table, 3 HP, R-8,30" X, 12" Y, 16" Z, 5" quill travel
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Alliant
Model: RT2
Work Table:, Surface Area: 42 x 9, T-Slot Center Distance: 3 @ 2.5 centers, T-Slot Sizes: 0.625, Maximum Weight of Workpiece: 750 lbs., Travels:, X-Axis Table Travel: 30 (26 with power feed), Y-Axis Table Travel: 12, Z-Axis Table Travel (knee): 16, Quill Travel: 5, Ram Travel: 12, Spindle:, Spindle Taper: R8, Spindle ...more
36" width x 36" H x 36" D Grieve #LA-850, top loading 850° preheat oven, like new, 460 V.
Category: Cabinet Type Ovens
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Grieve
Model: LA-850
GRIEVE TOP LOADING 850 DEGREE PREHEAT OVEN.
Forklifts
1 Result
33000 lb. Caterpillar #DP150, Forklift, 2-Stage Mast, 96" Forks
Category: Forklifts
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Caterpillar
Model: DP-150
Year: 2001
Overview, Type: FORKLIFTS Manufacturer: CATERPILLAR Model: DP-150 Year: 2001 Stock #: 2009321 Status: For Sale.
60 Ton, Wysong #H60-72, press brake, 6' overall, 54" between housing, 6" stroke, 7.5 HP, One shot lube system
Category: Hydraulic Press Brakes
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Wysong
Model: H60-72
MODEL.H60-72, Capacity.60 TON, Length.72", Distance Between The Housing.54", Stroke.6", Adjustment.3", Die Space / Open Height.15", Motor.7.5 HP, Floor Space., Height., Weight.11,000 Lbs., Back Gauge.Yes, Dual Ram Counter Balance.Yes, Power Ram Adjustment With Indicators.Yes, Dual Palm Control On Ram.Yes, One Shot ...more
Initial and Double Pinch Plate Bending Rolls
1 Result
10' x 1/2" Faccin #3HCD, 3-roll initial pinch plate roll, digital positioning, 2005
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Faccin
Model: 3HCD
Year: 2005
Location: Houston, TX, Brand: Faccin, Model: 3HCD, Serial #: 0503279-2734, Year: 2005, Approx. Shipping Weight: 21,000 Lbs., Approx. Shipping Dimensions: 20 L x 6 W x 6 H, Skidding Fee: Skidding Unavailable, Maximum Bending Length: 3100mm (Approximately 122), Maximum Bending Thickness: 12MM (Approximately.472), Roll ...more
5" x 5" x 3/8" Piranha #P50, Ironworker, 50 Ton, 8" throat depth, 4.25" stroke, 3 HP
Category: Ironworkers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Piranha
Model: P-50
KEC TO BE INSPECT, CLEAN AND CYCLE, P-50, Punching Capacity 50 tons, Throat Depth 8", Flat Bar Shear 3/4" x 6", Angle Shear 5" x 5" x 3/8", Round Bar Shear 1/4" to 1.5", Square Bar Shear 1/2" to 1", Coper Notcher 2.75" x 4", Stroke Length 4.25", Motor Power 3 HP, Weight 1,700 lbs.
5" x 5" x 3/8" Piranha #P50, Ironworker, 50 ton, 4.25" stroke, 8" throat depth, 3 HP, 440 Volt
Category: Ironworkers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Piranha
Model: P-50
RAN, INSPECTED, AND IN GREAT WORKING CONDITION, P-50, Punching Capacity 50 tons, Throat Depth 8", Flat Bar Shear 3/4" x 6", Angle Shear 5" x 5" x 3/8", Round Bar Shear 1/4" to 1.5", Square Bar Shear 1/2" to 1", Coper Notcher 2.75" x 4", Stroke Length 4.25", Motor Power 3 HP, Voltage 440, MISSING PRESS BRAKE ATTACHMENT.
6" x 6" x .375" Scotchman #6509-24M, ironworker, 65 ton, excellent, clean used machine
Category: Ironworkers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Scotchman
Model: 6509-24M
Very nice, used ironworker!.
16" 3-Jaw self centering flat back chuck, new
Category: Lathe Chucks
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
16" 3-JAW SELF CENTERING FLAT BACK CHUCK.
20" 3-Jaw self centering flat back chuck
Category: Lathe Chucks
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
25" 3-JAW SELF CENTERING FLAT BACK CHUCK.
Longitudinal Seam Welders
1 Result
10' Jetline #LWP-120Z, Longitudinal Seam Welder, Jetline Cold Wire TIG Equipment & Voltage Control
Category: Longitudinal Seam Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Jetline
Model: LWP-120Z
Overview, Type: Longitudinal Seam Welders Manufacturer: JETLINE Model: LWP-120Z Stock #: 2009325 Status: For Sale Serial #: 010360.
Material Handling Equipment
2 Results
Long Bed Utility Golf Cart, EZ Go #TXT, 8' flat bed w/under bed storage, charger included
Category: Material Handling Equipment
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: E-Z-Go
Model: TXT
CHARGER INCLUDED, 857 HOURS, 8' FLAT BED W/ UNDER BED STORAGE.
Nashville Wire, Folding Wire Container, 4000 lb. capacity
Category: Material Handling Equipment
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Model: 4,000#
Folding Wire Container great for holding bulky items, parts, or inventory! 4,000 Pound Capacity, Overview, Type: MISCELLANEOUS Manufacturer: Nashville Wire Model: 4,000# Stock #: 2009338 Status: For Sale.
Lincoln #Idealarc-DC400, power source with LF-74 single feeder, 400 amp, nice
Category: Mig Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Lincoln
Model: IDEALARC DC400
Overview, Type: WELDING MACHINES, MIG Manufacturer: LINCOLN ELECTRIC Model: IDEALARC DC400 Stock #: 2009297 Status: For Sale Serial #: TBA.
Lincoln #Invertec-V350-Pro with LF-72 feeder, to be rigged out with cables, guns & gas hose
Category: Mig Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Lincoln
Model: INVERTEC V350-PRO
The multi-process Invertec V350 PRO from Lincoln is an efficient, lightweight and portable choice for training, fabrication or construction applications. Available in Construction, Factory, Factory (Tweco) and Advanced Process models, the versatile V350 PRO is ready for almost any welding job in the shop or in outdoor ...more
Miscellaneous Furnaces, Ovens and Parts
8 Results
Electrode Holding Oven, Henkel Enterprises Keen #K-1000 SMAW, 110 V., 150-550°F, like new
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Henkel
Model: ELECTRODE HOLDING OVEN
KEEN 1500 LB. HOLDING OVEN. 110 VOLT, EXCELLENT, LIKE NEW CONDITION.
Welding Rod Oven, Arc Specialties Force #300, 350 lb.capacity (2 available)
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Arc Force
Model: WELDING ROD OVEN
2 EA. ARC FORCE 300 (350#) ROD OVEN.
Welding Rod Oven, Phoenix #510-NM, manual door, 1000 deg., 9 KW, 440 V. 3 phase
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Pheonix
Model: WELDING ROD OVEN
USED PHOENIX 700# STANDING ROD OVEN **TYPE 700-BT**.
Welding Rod Oven, Phoenix #750-BT, 100-1000 deg
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Pheonix
Model: WELDING ROD OVEN
PHEONIX ROD OVEN.
Welding Rod Oven / Flux, Arc Specialties Force #950FX, 150 lb.capacity, new, in stock
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Arc Force
Model: WELDING ROD OVEN / FLUX
ARC FORCE 150# FLUX OVEN.
Welding Rod Oven / Flux, Keen #KHTF-600, 600 lb.capacity, 240 V., new, in stock
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Keen
Model: WELDING ROD OVEN / FLUX
1 ea. Keen 600# Flux Oven.
Welding Rod Oven / Flux, Phoenix #FX950, 600 lb.capacity, 100-450 deg
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Pheonix
Model: WELDING ROD OVEN / FLUX
PHEONIX ROD OVEN (600#).
Welding Rod Oven / Flux, Phoenix #FX950, high capacity flux oven, 600 lb.capacity, 100-450 deg
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Phoenix
Model: WELDING ROD OVEN / FLUX
PHOENIX MODEL 950FX HIGH CAPACITY FLUX OVEN.
Clausing #2286-300, multiple spindle drill press, with production table w/trough
Category: Multi Spindle Drill Presses
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Clausing
Model: 2286-300
DRILLING CAPACITY. 1-1/4", DRILLS TO CENTER OF CIRCLE. 20", SPINDLES TRAVEL. 6-1/2", QUILL DIAMETERS. 2-1/2", SPINDLE TAPERS. #3MT, SPINDLE SPEEDS(5). 300, 500, 800, 1,200 & 2,000 RPM, TABLE WORKING SURFACE. 24" X 80", OVERALL SIZE OF TABLE. 29-1/2" X 85-1/2", APPROXIMATE HEIGHT. 85", APPROXIMATE WEIGHT. 2,800 ...more
Multi-Process Welders
1 Result
Miller Electric #PipeWorx400, Industrial MIG/Flux-Cored Welding System, 40-400 amps, 5/16" carbon diameter, 230/460 Volt, 3PH
Category: Multi-Process Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: PIPEWORX 400 WELDING SYSTEM
Overview, Type: WELDING MACHINES Manufacturer: Miller Electric Model: Pipeworx 400 Welding System Stock #: 2009337 Status: For Sale.
3" to 48" Vernon Tool #MPM5-0348/40FT, Pipe Profiler, 22,500 lb. max. load, 200 IPM
Category: Pipe Bevelers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Vernon
Vernon Tool MPM pipe profiler, Pipe Diameter 3"-48".
30" to 36" H & M #5, Manual Pipe Beveling Machine
Category: Pipe Bevelers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Saddle Type Beveler that can handle 30, 32, 34 and 36 Pipe.
2" to 12" H & M #2, Manual Pipe Beveling Machine
Category: Pipe Bevelers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Saddle Type Beveler that can handle 6, 7, 8, 10 and 12 Pipe.
12" to 20" H & M #3, Manual Pipe Beveling Machine
Category: Pipe Bevelers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Saddle Type Beveler that can handle 12, 14, 16, 18 and 20 Pipe.
24" to 30" H & M #30, Manual Pipe Beveling Machine
Category: Pipe Bevelers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Saddle Type Beveler that can handle 24, 26, 28 and 30 Pipe.
20" to 26" H & M #4, Manual Pipe Beveling Machine
Category: Pipe Bevelers
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Saddle Type Beveler that can handle 20, 22, 24 and 26 Pipe.
KEC #330, pipe beveling & cutting machine/system, 3"-30" pipe diameter, 12' bed length
Category: Pipe Machinery
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: 330
KEC PIPE BEVELING AND CUTTING MACHINE/SYSTEM.
Profax #PBM-100, portable pipe beceling/cutting machine, 4" pipe diameter
Category: Pipe Machinery
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: PBM-100
PORTABLE PIPE BEVELING/CUTTING MACHINE.
H & M #BMH, motorized band type pipe beveling machine, 10" to 240" w/proper band
Category: Pipe Machinery
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Model: BMH
Year: 2012
H & M MOTORIZED BAND-TYPE PIPE BEVELING MACHINE.
Pipe Threaders (Includes Nipple Machines, Pipe and Tube Cutters)
1 Result
Ridgid #535, pipe threader with extra heads & tooling
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ridgid
Model: 535
RIDGID 535 PIPE THREADER W/ EXTRA HEADS AND TOOLING.
Hypertherm #Max-200, plasma system w/hand held or machine style torch, 200 amps
Category: Plasma Cutters/Punches
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Hypertherm
Model: MAX 200
Overview, Type: Plasma Welders Manufacturer: HYPERTHERM Model: MAX 200 Condition: Excellent Stock #: 2009259 Status: For Sale Serial #: 200-005113.
Thermal Dynamics #Pak-Master-150XL, plasma machine w/hand held torch
Category: Plasma Cutters/Punches
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Thermal Dynamics
Model: PAK MASTER 150XL
Cut Capacity: 1-1/2 (38mm) Genuine Cut, 1-3/4 (45mm) Severance, 1 (25 mm) Pierce Capacity, Output Current: 30-120 Amps, Adjustable, Input Power: 208-230/460 VAC, 3ph, 50/60Hz, 78/74/37 Amps, 220/380-415 VAC, 3ph, 50/60Hz, 75/44/40 Amps, Duty Cycle: 60% @ 120A, 100% @ 100A, Dimensions: Length 35 (889mm), Width 24.5 ...more
Power Squaring Shears (Inch)
1 Result
1/4" x 6' Haco, Atlantic #HDE-06X1/4, shear, 80" overall, 10-25 SPM, 39" front operated power back gauge, 15 HP, 230 V.
Category: Power Squaring Shears (Inch)
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Atlantic
Model: HDE 06X1/4
Haco HDE 6 x 1/4 Hydraulic Shear. Brand: Haco, Model: HDE, Serial #: 67092, Approx. Shipping Weight: 8,000 Lbs., Approx. Shipping Dimensions: 9 L x 8 W x 6 H, Max Cutting Thickness: 1/4 Mild Steel, Max Cutting Width: 80, Strokes Per Minute: 10 25, Back Gauge Travel: 39, Motor HP: 15, Electrical: 230V/3PH. Front ...more
Power Tank Turning Rolls
33 Results
.7 Ton, Profax #TR-1500, pipe turning rolls, 1500 lb., 1.5"-16" dia., vari-rotation
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR-1500
1500 LB PROFAX TR-1500 PIPE TURNING ROLLS; 1.5 INCH TO 16 INCH DIAMETER RATING; RENT OR PURCHASE OPTIONS.
1.5 Ton, Kec #3-60HD, pipe roll on stand, 3000 lb., foot Control, vari-speed, new, 2014
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: 3-60HD
Year: 2014
Overview, Type: TANK TURNING ROLLS AND PIPE ROLLS Manufacturer: KEC Model: 3-60HD Condition: Excellent Stock #: 10512 Status: For Sale Serial #: 11915D/NA.
3 Ton, KEC #3-60HD, pipe roll set, 6000 lb., 2"-60" pipe size, vari-speed, foot control
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: 3-60 HD
6,000 LB. PIPE ROLLS; 3 TON WELDING PIPE ROLL SET.
3 Ton, KEC #3-60HD, tank & vessel turning roll set with forward/reverse, foot pedal, new, 2025
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: 3-60 HD
Year: 2025
NEW 6,000 LB KEC PIPE ROLL SETS.
10 Ton, KEC #KEC10HD, tank roll set with vari-speed hand pendant, 20000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: KEC10HD
Year: 2025
Overview, Type: TANK TURNING ROLLS AND PIPE ROLLS Manufacturer: KEC Model: KEC10HD Condition: New - In-Stock Year: 2025 Stock #: 2009296 Status: For Sale Serial #: TBA.
10 Ton, Preston-Eastin #TDRA-10, set of tank rolls, 20000 lb., 6"-144" pipe size, variable speed, 2014
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-10
Year: 2014
PRESTON-EASTIN 10 TON TDRA-10HD SET OF TANK ROLLS.
10 Ton, Profax #TR20000/IR10000, turning roll set, 20000 lb., hand pendant, 2014/17
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR20000/IR10000
Year: 2014
Profax 10 Ton Turning Roll Sets w/ Hand Pendant, In Shop.
20 Ton, Preston-Eastin, turning rolls, 40000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-20HD
Year: 2014
40,000 LB (20 TON) PRESTON-EASTIN TANK TURNING ROLL SET.
20 Ton, Profax #TR40000/IR20000, turning roll sets w/hand pendant, new, in stock, 2017
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR40000/IR20000
Year: 2017
Profax 20 Ton Turning Roll Sets w/ Hand Pendant, IN SHOP.
20 Ton, Weldwire #WWRD-20ST, tank turning roll set, 40000 lb., vari-speed, 440 V.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Weldwire
Model: WWRD-20ST
40,000 LB (20 TON) WELDWIRE TANK TURNING ROLL SET.
30 Ton, Profax #TR60000, tank & vessel turning roll sets, vari-speed controls, 60000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR60000
Year: 2013
PROFAX 30 TON TANK TURNING ROLLS.
30 Ton, Profax #TR60000, tank turning rolls, variable speed, hand controls, new, in stock, 2017
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR60000
Year: 2017
PROFAX 30 TON TANK TURNING ROLLS, In Shop.
30 Ton, Ransome #BIRR-60, tank turning roll idlers, 60000 lb., rent or purchase
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: BIRR 60
USED RANSOME 60,000# WELDING TANK TURNING ROLL IDLERS; RENT OR PURCHASE; VESSEL TANK TURNING ROLLS.
30 Ton, Ransome #BIRR-60, tank turning roll idlers, tank or vessel turning roll, 60000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: BIRR 60
RANSOME 60 TON TANK ROLL SET; TANK OR VESSEL TURNIING ROLL.
30 Ton, Ransome #BPRR/BIRR30, tank & vessel roll sets, 60000 lb., vari-speed, new
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: BPRR/BIRR 30
Year: 2014
KOIKE ARONSON/RANSOME 30 TON TANK ROLL SET.
30 Ton, Aronson, Preston Eastin, Ransome, Pandjiris turning rolls, 60000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: BPRR/BIRR 30
Year: 2013
KOIKE ARONSON/RANSOME 30 TON TANK TURNING ROLL SET; RENT OR PUCHASE; RUBBER WHEEL VESSEL TURNING ROLLS, IN SHOP.
30 Ton, Koike Aronson #BPRR/BIRR30, tank turning roll set, variable speed, rent or purchase, 2013
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: BPRR/BIRR 30
Year: 2013
KOIKE ARONSON/RANSOME 30 TON TANK TURNING ROLL SET; RENT OR PUCHASE; RUBBER WHEEL VESSEL TURNING ROLLS, IN SHOP.
60 Ton, Aronson #WSD-120-CCL/WSI-120/CCL, steel wheel constant center line tank turning roll set
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: WSD-120-CCL/WSI-120-CCL
Overview, Type: TANK TURNING ROLLS AND PIPE ROLLS Manufacturer: ARONSON Model: WSD-120-CCL/WSI-120-CCL Condition: Excellent Stock #: 2009278 Status: For Sale Serial #: 46949/46949.
60 Ton, Koike, 120000 lb., turning rolls 4 sets
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Koike
Model: CPRR/CIRR
Year: 2014
KOIKE ARONSON/RANSOME 60 TON TANK ROLL SETS.
60 Ton, Profax #TR120000, tank & vessel turning roll sets, 120000 lb., new
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR120000
PROFAX 60 TON TANK TURNING ROLLS **NEW**, In Shop.
60 Ton, Profax #TR120000, tank turning rolls, new, in stock, 2017
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: TR120000
Year: 2017
PROFAX 60 TON TANK TURNING ROLLS **NEW**, In Shop.
90 Ton, Ransome #DPRR/DIRR-90, tank turning roll set, vari-speed, hand pendant, 180000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: DPRR/DIRR 90
USED RANSOME 90 TON SET OF TANK TURNING ROLLS.
90 Ton, Ransome #DPRR/DIRR90, tank turning roll set, 1 drive & 1 idler, new, in stock
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: DPRR/DIRR 90
90 TON TANK TURNING ROLL SET (1 DRIVE AND 1 IDLER).
90 Ton, Ransome #DPRR/DIRR90, tank turning roll set, ari-speed, hand pendant, 220/440 V.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: DPRR/DIRR 90
USED RANSOME 90 TON SET OF WELIDNG TANK TURNING ROLLS.
100 Ton, Key Plant #CR100, tank turning roll set (1 drive & 1 idler per set)
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Key Plant
Model: CR100
Model KP100 Conventional Rotator Set (Drive & Idler), Safe Working Load Drive Unit 50 tonne, Safe Working Load Idler Unit 50 tonne, Maximum Load Carrying Capacity Set 100 tonne (1 Driver & 1 Idler), Rotation Capacity, Drive Unit 150 tonne, Wheel Centre Distance 27.5, 43.3, 59, 74.8, 90.6, 106.3, 122in (700 ...more
120 Ton, Preston-Eastin #TDRA-120, tank or vessel turning rolls, rubber wheel, 240000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-120
120 TON SET OF PRESTON-EASTIN TANK OR VESSEL TURNING ROLLS; RUBBER WHEEL WELDING TANK ROLLS; RENT OR PURCHASE.
120 Ton, Preston-Eastin #TDRA-120HD, tank turning roll set w/extended frame, 240000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-120HD
120 TON TANK TURNING ROLL SET FROM PRESTON-EASTIN W/ EXTENDED FRAME.
120 Ton, Preston-Eastin #TDRA-120HD, tank & vessel turning roll sets w/extended frame
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-120HD
Year: 2012
120 TON TANK TURNING ROLL SET FROM PRESTON-EASTIN W/ EXTENDED FRAME.
120 Ton, Preston-Eastin #TDRA-120HD/TIRC120HD, Ransome, Koike turning rolls, 240000 lb., we rent also 10 sets
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-120HD/TIRC120HD
Year: 2012
120 TON TANK TURNING ROLL SET FROM PRESTON-EASTIN W/ EXTENDED FRAME, IN SHOP.
120 Ton, Preston-Eastin #TDRA-120HD/TIRC120HD, tank turning roll set w/extended frame
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: TDRA-120HD/TIRC120HD
120 TON TANK TURNING ROLL SET FROM PRESTON-EASTIN W/ EXTENDED FRAME, IN SHOP.
120 Ton, Ransome #EPRR/EIRR, set of tank or vessel turning rolls, rubber wheel, 240000 lb.
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: EPRR/EIRR
Year: 2013
KOIKE ARONSON RANSOME 120 TON SET OF TANK OR VESSEL TURNING ROLLS; RUBBER WHEEL WELDING TANK ROLLS; RENT OR PURCHASE.
120 Ton, Koike Aronson / Ransome #WRD120-CCL/WRI120-CCL, 8"-18' diameter, 2011
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: WRD120-CCL/WRI120-CCL
Year: 2011
ARONSON 120 TON CONSTANT CENTER LINE TANK ROLL SET, IN SHOP.
400 Ton, Aronson, 800000 lb., 1 drive, 6 idlers, wide steel wheels, nice
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: WSD400/WSI400
ARONSON WSI400.
2.7'-10" South Bend / Foradia #GF500-800, radial drill, #4MT, 9" stroke, 40-1750 RPM
Category: Radial Drills
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Southbend
Model: GF 500 800
2' 7" x 10" SOUTH BEND / FORADIA GF-50-800 RADIAL DRILL, MANUFACTURER - SOUTH BEND / FORADIA, ARM LENGTH - 2' 7", DRILLING CAPACITY, MILD STEEL - 2", DRILLING CAPACITY, CAST IRON - 2 3/8", TAPPING CAPACITY, MILD STEEL - 1 9/16", TAPPING CAPACITY, CAST IRON - 2", COLUMN DIAMETER - 10", MIN / MAX DISTANCE ...more
4' -11" Carlton #1A, radial arm drill, 5 HP, 1500 RPM
Category: Radial Drills
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Carlton
Model: 3A
Carlton 5 x 15 Radial Arm Drill.
5' Ikeda #RM-1575, radial arm drill, box table, 1980
Category: Radial Drills
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ikeda
Model: RM-1575
Year: 1980
IKEDA 5 FOOT RADIAL ARM DRILL W/ BOX TABLE.
6' -15" Carlton #3A, radial arm drill, tilting box table
Category: Radial Drills
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Carlton
Model: 3A
CARLTON 6' X 15" RADIAL ARM DRILL WITH TILTING BOX TABLE.
6' -19" Carlton #4A, radial arm drill
Category: Radial Drills
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Carlton
Model: 4A
6 X 19 CARLTON RADIAL ARM DRILL.
7' -17" American, full universal radial drill, excellent condition
Category: Radial Drills
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: American
Model: FULL UNIVERSAL
EXCELLENT CONDITION RADIAL DRILL REMOVED FROM SERVICE OUT OF THE HOOVER DAM. WE PURCHASED IT FULLY CRATED AND THEN RE-ASSEMBLED IT. THE UNIT CAN BE SEEN UNDER POWER IN OUR WAREHOUSE!.
Scissor Lifts
1 Result
1000 lb. Genie #GS-2646, scissor lift, 26' lift, 46" width, low hours
Category: Scissor Lifts
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Genie
Model: GS-2646
EXCELLENT CONDITION W/ ONLY 180 HOURS.
Lincoln #Precision-Tig-275-1826-2, tested, great working condition (10 available)
Category: Tig Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Lincoln
Model: PRECISION TIG 275
Overview, Type: WELDING MACHINES Manufacturer: LINCOLN ELECTRIC Model: PRECISION TIG 275 Stock #: 2009288 Status: For Sale.
Miller #Goldstar-452 - 903374, stick & tig welding machines, 220/460 V DC., 3 phase
Category: Tig Welders
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Miller
Model: GOLDSTAR 452 903374
Year: 2017
MILLER GOLD STAR 452 STICK AND TIG WELDING MACHINES.
Tooling and Accessories - Miscellaneous
1 Result
Chucks & Grippers, Gator by Fuerda #PS3-25" A, 3-jaw, 10" thru hole, new
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Gator
Model: PS3-25A
New GATOR 25" 3 Jaw Chuck (Plain Back; Self-Centering) w/ 10" Thru Hole.
Vertical Band Saws
4 Results
18" x 22" Marvel #Series-8-Mark-II, vertical tilt frame band saw, 184" x 1.25" blade, 5 HP, new
Category: Vertical Band Saws
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Armstrong
Model: 8-MARK-II
18 x 22 New Marvel Vertical Tilt Frame Band Saw Series 8-Mark-II :, Column in 3 Forward Cant Position.17.5 X 22, Throat Cap.18, Work Height.22, Capacity @ 90.18 X 22, @ 45(Right).18 X 14.5, @ 45 (Left).18 x 13, @ 60 (Right).18 9.7, @ 60 (Left).18 X 7.3, T-Slotted Work Table.24-1/4 33, Table Height.38, Blade ...more
18" x 26" Marvel #Series-8-Mark-I, vertical band saw, 186" x .075" blade, 1.3 HP, 20-200 FPM
Category: Vertical Band Saws
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Armstrong
Model: SERIES 8/M2/M8
Overview, Type: SAWS, VERTICAL Manufacturer: ARMSTRONG BLUM Model: SERIES 8/M2/M8 Stock #: 2009286 Status: For Sale Serial #: 822077-W.
36" DoAll #DBW-8, contouring vertical band saw with blade welder
Category: Vertical Band Saws
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Do All
Model: DBW-8
DO-ALL 36 INCH VERTICAL CONTOURING BANDSAW WITH BLADE WELDER.
Marvel #25, vertical band saw, 37" height capacity, nice
Category: Vertical Band Saws
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Marvel
Model: 25
MARVEL MODEL 25 VERTICAL SAW (EXTENDED HEIGHT CAP.).
Welders Fume Recovery
2 Results
Donaldson #Easy-Trunk, fume collectors with new filters, 750 cfm, 110 V.
Category: Welders Fume Recovery
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Donaldson
Model: EASY TRUNK
We have several units in stock!, 750 CFM, 110 volt.
Lincoln Electric #Mobiflex-400-MS-CPL, fume extractor, 1 HP, 110 V.
Category: Welders Fume Recovery
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Lincoln
Model: MOBIFLEX 400-MS CPL
110 VOLT, 1 HP.
Pandjiris & lathe style welding chucks
Category: Welding Chucks
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
WELDING CHUCKS, PANDJIRIS AND LATHE STYLE.
Welding Machine Parts and Miscellaneous
7 Results
1.5"-42" Circle Welding Innovation #RB2500, Circle Welding Nozzle Hole Burner w/ Arm & Magnet
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Circle
Model: 1.5-42 CIRCLE WELDING INNOVATION #RB2500
BURNS 1.5" TO 42" SADDLE TYPE NOZZLE HOLES.
10000 lb. Headstock, Preston-Eastin #HS-100, with 48" round table & adjustable outboard
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: 10000 LB. HEADSTOCK
Overview, Type: HEAD AND TAIL STOCKS Manufacturer: PRESTON EASTIN Model: HS-100 Headstock Stock #: 2009317 Status: For Sale Serial #: HS-100-10.
Headstock, Aronson #HS2, with 20" 3-Jaw chucks, 2500 lb., 36" square T-slotted table
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: HEADSTOCK
2500 LB. ARONSON HEADSTOCKS W/ 20 INCH 3 JAW CHUCKS.
Headstock / Tailstock, Aronson #HS6/TS6, 6000 lb., 48" square T-slotted table
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: HEADSTOCK / TAILSTOCK
10,000 LB. ARONSON HEADSTOCK W/ 48 INCH SQUARE TABLE.
Motorized Track Cutting Machine, Profax #TCM-100, 2009
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: MOTORIZED TRACK CUTTING MACHINE
Year: 2009
PORTABLE MOTORIZED TRACK CUTTING MACHINE.
Nozzle Welders, Cypress #CW-7 (CW-1700), with full flux recovery & spider chuck, 2008
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Cypress
Model: NOZZLE WELDERS
Year: 2008
CYPRESS 6" to 24" NOZZLE WELDER W/ FULL FLUX RECOVERY & SPIDER CHUCK, In Stock.
Welding Torch Stand, Profax #WTS-44, manual adjust, 25 lb.capacity, 60" x50" travels, new
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WELDING TORCH STAND
WELDING TORCH STAND; PROFAX WTS-44; **MANUAL ADJUSTING TORCH STAND**.
Welding Manipulators
13 Results
4' x 4' Profax welding manipulator, automatic tig or sub arc
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Year: 2016
4 X 4 NEW PROFAX WELDING MANIPULATOR W/ SWIVEL BASE, In Shop.
4' x 4' Stinger, maniuplator w/powered vertical travel, column is mounted on a heavy duty slowing bearing
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Stinger
The Stinger Model 4 X 4 Manipulator is mounted on a 31" wide x 33-1/2" length high rolling base. It has a 4' (48") lift height with a 39" minimum center line of boom off floor and an 87" maximum center line boom off floor. The boom stroke is 4' (48") with standard hand wheel and 3'4" (40") w/optional ...more
6' x 6' Key Plant #SD-Series, hot wire tig package w/Key plant welding manipulator
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Key
Overview, Type: WELDING MANIPULATORS Manufacturer: Key Plant Model: SD Series Stock #: 2009281 Status: For Sale Serial #: 09127.
6' x 6' Preston-Eastin #MA66-MD, manipulator, in/out variable speed, up/down constant, new, in stock
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
MANIPULATOR **PRESTON-EASTIN** 8x8 MANIPULATOR W/ BOLT DOWN BASE, In Shop.
6' x 6' Profax #WM-66, sub-arc welding manipulator, in/out variable speed, up/down constant, 2013
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Year: 2013
6 X 6 PROFAX WM-66 SUB-ARC WELDING MANIPULATOR.
6' x 6' Profax #WM-66, sub-arc welding manipulator, variable speed, 440 V., new
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
6 X 6 PROFAX WM-66 SUB-ARC WELDING MANIPULATOR.
6' x 6' Profax / Miller #WM-66, sub-arc welding package, in/out variable speed, up/down constant, 2019
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Year: 2019
EXCELLENT USED 6 X 6 PROFAX WM-66 SUB-ARC WELDING MANIPULATOR W/ FULL MILLER 600 AMP WELDING PACKAGE **TURN-KEY**.
6' x 6' Profax Lincoln #WM-66, sub-arc welding package manipulator on push cart
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
NEW 6 X 6 PROFAX WM-66 SUB-ARC WELDING MANIPULATOR ON PUSH CART.
6' x 6' Ransome #6x6, welding manipulators
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
RANSOME 6 X 6 WELDING MANIPULATORS.
8' x 8' Pandjiris #Double-8, welding manipulator on swivel flange & X-base
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Pandjiris
PANDJIRIS 8 X 9 WELDING MANIPULATOR ON SWIVEL FLANGE AND X BASE.
8' x 9' Aronson #G8VRA10CL-PK-C, Welding Manipulator
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
JUST IN! USED 8' X 9' MANIPULATOR ON A MANUAL PUSH CAR! TO BE INSPECTED, REPAIRED AND SOLD IN NICE USED CONDITION! 2-4 WEEK LEAD TIME; TO MAKE READY!.
10' x 10' Profax #WM-1010, Sub-Arc manipulator, 10' vertical & horizontal travel, hand pendant control, WM-SA mounting bracket included, 440 V.
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
10' X 10' WELDING MANIPULATOR PROFAX WM-1010 SUB-ARC WELDING MANIPULATOR ON VARIABLE SPEED CAR.
14' x 14' Preston-Eastin #MA1414HD, with x base new, in stock ready, we can add weld.equip.,440 V.,2017
Category: Welding Manipulators
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Year: 2017
12 X 12 SUB ARC WELDING MANIPULATOR, In Shop.
Welding Positioners
28 Results
250 lb. Profax, welding positioner
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-250
Year: 2020
250 LB. PROFAX WELDING POSITIONER; WP-250.
500 lb. Preston-Eastin #PA5-MT, welding positioner with manual tilt & vari-speed rotation
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PA5-MT
Overview, Type: WELDING POSITIONERS/NEW, USED AND REBUILT Manufacturer: PRESTON-EASTIN Model: PA5-MT Stock #: 2009310 Status: For Sale.
500 lb. Profax #WP-500, medium duty welding positioner, 19-5/8" round table, new, 2017
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-500
Year: 2017
500 LB. PROFAX MEDIUM DUTY WELDING POSITIONER; WP-500.
500 lb. Profax #WP-500, medium duty welding positioner, 19-5/8" round table, 16" chk, 2014
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-500
Year: 2021
500 LB. USED PROFAX MEDIUM DUTY WELDING POSITIONER; WP-500.
1000 lb. Profax #WP-1000, heavy duty welding positioner, 24-1/2" round table, new, 2018
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-1000
Year: 2018
PROFAX 1,000 LB. HEAVY DUTY WELDING POSITIONER; WP-1000; 16" 3 JAW WELDING CHUCK.
1000 lb. Profax #WP-1000, welding positioner, 16" 3-jaw, 24-1/2" round table, tilt constant, 115V.,2012
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-1000
Year: 2012
PROFAX 1,000 LB. HEAVY DUTY WELDING POSITIONER; WP-1000; 16" 3 JAW WELDING CHUCK.
1000 lb. Profax #WP-1000, welding positioner with 3-jaw 16" chuck, like new, 2024
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-1000
Year: 2024
PROFAX 1,000 LB. HEAVY DUTY WELDING POSITIONER; WP-1000; 16" 3 JAW WELDING CHUCK.
2500 lb. Aronson #HD25A, Welding Positioner w/ Hand Pendant, Forward/Reverse foot pedal, 36" square T-slotted table
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: HD-25A
2500 LB. @ 6 INCH CENTER OF GRAVITY, 36" SQUARE T SLOTTED TABLE, VARIABLE SPEED.
3000 lb. Aronson #GE-30, power elevated positioner
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: GE30A
Year: 1974
3,000 LB. ARONSON POWER ELEVATED WELDING POSITIONER **GE30**, IN SHOP.
3000 lb. Preston-Eastin #30-6 KEC, welding positioner, 30" round table, 20" chuck, 2013
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: 30-6
Year: 2022
3,000 LB. WELDING POSITIONER **PRESTON-EASTIN 30-6** W/ 30" ROUND TABLE.
3000 lb. Preston-Eastin #PE30HD-6, welding positioner w/vari-speed hand pendant, 2021
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PE30HD-6
Year: 2021
CAPACITY 3000# @ 6" C.G., TILT CONSTANT, ROTATION VARIABLE, VOLTAGE 110 Volt, CONTROLS Foot and/or Hand, HEIGHT ADJUSTABLE, SHIPPING WEIGHT 1800#, TABLE 30" SQUARE T-SLOTTED, 30" GRIPPER, OPTIONAL FWD/RVS FOOT PEDAL AVAILABLE.
3000 lb. Preston-Eastin #PE30HD-6-KEC, welding positioner, 36" round table, new, 2017-19
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PE30HD-6-KEC
Year: 2019
Overview, Type: WELDING POSITIONERS Manufacturer: PRESTON-EASTIN Model: PE30HD-6-KEC Condition: New - In-Stock Year: 2019 Stock #: 82265 Status: For Sale Serial #: PE30HD-573, Like New 30" Preston-Eastin Gripper.
4500 lb. Preston-Eastin #PA-45HD, Koike, 12" C.G., 42" round table, 440 V.,rotation variable speed, 2014 (3 available) units
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PA-45HD
Year: 2014
NEW 4500 LB. **PA-45HD** WELDING POSITIONER W/ 42" ROUND T-SLOTTED TABLE, In Stock.
6000 lb. Profax #WP-60, welding positioner, new, in stock, 2013
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
Model: WP-60
Year: 2013
NEW PROFAX 6,000 LB WELDING POSITIONER, Subject to lead time.
10000 lb. Koike, Aronson #HD100VF, welding positioner
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Koike
Model: HD-100 VF
KEC TO INSPECT, CLEAN, PAINT & CYCLE AND ENSURE THE UNIT IS SOLD IN GREAT WORKING CONDITION!.
10000 lb. Preston-Eastin #PA100HD-12, welding positioner with 54" round table, 2012
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PA100HD-12
Year: 2012
CAPACITY 10,000 LB. @ 12" C.G., VOLTAGE 440 VOLT 3 PHASE, TABLE 54 INCH ROUND, CONTROL HAND PENDANT, TILT MOTOR 3 HP, ROTATION MOTOR 3 HP.
10000 lb. Preston-Eastin #PA100HD-12, welding positioner w/54" square table, 3 HP
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PA100HD-12
CAPACITY 10,000 LB. @ 12" C.G., VOLTAGE 440 VOLT 3 PHASE, TABLE 54 INCH SQUARE, CONTROL HAND PENDANT, TILT MOTOR 3 HP, ROTATION MOTOR 3 HP.
10000 lb. Preston-Eastin #PA100HD-12, welding positioner with 54" round table
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PA100HD-12
Overview, Type: WELDING POSITIONERS/NEW, USED AND REBUILT Manufacturer: PRESTON-EASTIN Model: PA100HD-12 Stock #: 2009315 Status: For Sale Serial #: PC100HD-82.
12000 lb. Pandjiris #120-12AB, Welding Positioner, 54" square table, 47"-74" @ 90° tilt, 5 HP, 0.73 RPM, 460 Volt
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Pandjiris
Model: 120-12 AB
The Model 120-12 MVRMTAB Positioner has a motorized variable speed rotation with ForwardStop-Reverse switch and dynamic braking. The rotation speed is variable from 0.02 to 0.73 RPM with motorized tilt infinitely variable through 135 degrees. A 54" square table with adjustable height to allow full tilting capability ...more
18000 lb. Aronson #GE-180VF, gear elevated, power tilt, vari-spd rotation, clean, 54" square -T-slotted table, 46.5"-79.5" horizontal axis max. height, 2012
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: GE180VF
Year: 2012
18,000 LB. GEAR ELEVATED WELDING POSITIONER W/ 54 INCH SQUARE TABLE, In Stock.
24000 lb. Preston-Eastin #PA240HD, 12" CG, 54" table, hand pendant, grippers, 7-1/2 HP
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
Model: PA240HD
Year: 2014
NEW 24,000 LB. PRESTON-EASTIN WELDING POSITIONER W/ 66" SQUARE TABLE, Lead Time Applies.
40000 lb. Aronson #G-400, 96" round table, hand pendant
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: G400
USED ARONSON 40,000 LB. WELDING POSITIONER W/ 96" ROUND TABLE, In Stock.
50000 lb. Aronson #GE-500-VFD, gear elevated welding positioner, power tilt, rotation, lift, 84" square table, 50-3/4" - 83-3/4" floor max. table center, 2012
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: GE500-VFD
Year: 2012
50,000 LB GEAR ELEVATED ARONSON GE-500 WELDING POSITIONER; RENTAL OR PURCHASE OPTIONS AVAILABLE, In Stock.
50000 lb. Koike Aronson #GE500VF, gear elevating welding positioner, 84" square table, very nice
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: GE500VF
TABLE 84" SQUARE, VOLTS 440 3-PHASE, CAPACITY 50,000# @ 12" C.G., SHIPPING WEIGHT 31,000#, CENTER OF TABLE TO FLOOR MINIMUM 50-3/4", CENTER OF TABLE TO FLOOR MAXIMUM 83-3/4", FLOOR PRINT 96-1/2" X 108", HOLLOW SPINDLE 12-1/8", CONTROL HAND PENDANT, TILT CONSTANT SPEED, ROTATION VARIABLE SPEED, CONSTANT SPEED GEARED ...more
120000 lb. Aronson #AB-1200, welding positioner, 10' x10'T-slotted square table, 1978
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: AB-1200
Year: 1978
ARONSON 120,000 LB. WELDING POSITIONER **AB-1200 WELDING POSITIONER W/ 10' TABLE**, In Stock.
120000 lb. Koike Aronson #G1200VF, welding positioner w/10'square table, very nice, late model
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: G-1200 VF
2014 MODEL AND VERY NICE! UNIT TO BE SOLD IN EXCELLENT CONDITION ! KEC WILL FULLY INSPECT, CYCLE AND ADDRESS ANY ISSUES PRIOR TO SHIPPING!.
220000 lb. Aronson #G-2200, welding positioner, 10' x10'sqaure table, pendant Control
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: G-2200
In Stock, 1 WEEK MAKE READY, CAN BE SEEN UNDER POWER IN OUR WAREHOUSE.
220000 lb. Ransome #2200-P, 10' square table, 20' hand pendant, 12" spdl thru hole, 5" thick table, tilt constant speed, 1981
Category: Welding Positioners
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Ransome
Model: 2200P
Year: 1981
USED 220,000 LB. RANSOME 2200P WELDING POSITIONER W/ 120" SQUARE TABLE, In Stock.
Preston-Eastin, 3000 lb. flat floor turntable w/hand pendant, 30" round table
Category: Welding Table
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Preston-Eastin
We have excellent used 3,000 lb. floor turntables w/ variable speed hand pendants. 30" round table.
Welding Turntables
8 Results
2500 lb. KEC #KT-25, custom build floor turntables, 30" table diameter
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: KT-25
Year: 2012
2500 LB. FLAT TURNTABLE, KEC FLOOR ROTATING TURNTABLE FOR WELDING.
4500 lb. KEC #KT-25, flat turntable, floor rotating turntable, 2012
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: KFT-45
Year: 2012
4500 LB. FLAT TURNTABLE, KEC FLOOR ROTATING TURNTABLE FOR WELDING.
6000 lb. KEC Inc., flat turntable
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: KT-6
Year: 2025
KEC 6,000 LB. FLAT FLOOR TURNTABLE W/ MACHINED TABLE TOP; PURCHASE OR RENT WELDING TURNTABLES.
12000 lb. KEC Inc. #FT-120, floor turntable, 48" table, variable speed, 110 V., excellent
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: FT-120
12,000# NEW KEC FLOOR TURNTABLE FOR WELDING; RENT OR PURCHASE TURNTABLES.
20000 lb. KEC #FT-200, welding flat turntable
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: FT-200
20,000 LB. WELDING FLOOR TURNTABLE; TURNTABLE FOR WELDING AND PREHEATING.
20000 lb. KEC #KFT-200, welding floor turntable, vari-speed rotation.48" table, 2012
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: KFT-1200
Year: 2012
120,000 LB. WELDING FLOOR TURNTABLE; TURNTABLE FOR WELDING AND PREHEATING.
40000 lb. KEC #FT-400, flat floor turntables, vari-speed rotation, new, in stock, 2015
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Kec
Model: FT-400
Year: 2015
40,000 LB WELDING TURNTABLE; FLAT FLOOR FLOOR TURNTABLES FOR WELDING AND PREHEATING.
120000 lb. Aronson #RFT120-SD, welding floor turntable, vari-speed, 120" round table
Category: Welding Turntables
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Aronson
Model: RFT120-SD
120,000 LB. ARONSON WELDING FLOOR TURNTABLE; TURNTABLE FOR WELDING AND PREHEATING.
