Browse:  Machinery Electrical
RSS Blog Surplus Record

GRINDERS, CYLINDRICAL, UNIVERSAL

 GCH Machinery Div World's Largest Stocking Dealer of Grinders
There are 167 listings in this category
File update: Thu, Apr 17, 2014 01:22
Advanced Search
Sort by:
Original Sort
3-1/2" x 12" Covel #512, cylindrical grinder w/ID attachment, 512-1229 Spec Sheet rfq
Industrial Surplus Inc, Berlin, CT 860-828-3541 (Fax 860-828-6747) Jack Guzewicz
5" x 12" Jones & Shipman #1212, internal grinding attach.,excellent,#1328 Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford
5" x 12" Jones & Shipman, .000020"infeed rfq
Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Fax 631-694-9415) Irv Richlin
5" x 12" Myford #MG12-HA, hyd.,dwell,rapid retract,auto-infeed,12"wheel,1970 Camera Spec Sheet rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
5" x 12" Myford, hyd. & manual machine,hyd.feeds,DRO,late,excellent,IUP Camera rfq
Stanley Machinery Corp, Agawam, MA 413-786-1300 Stan Cohen
6" x 12" Crystal Lake #612, univ.cyl.grinder,hand feeds,7"whl,Fagor DRO,1700 RPM,4C Collets,Bijur one-shot lubricator,#150692 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
6" x 16" Studer #S-20 OC, auto infeed, #29127 Camera rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Fax 818-788-2470) Sales Dept.
7" x 15" MSO #FH100, hydraulic table, standard tailstock, swivel work head rfq
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
8" x 14" Brown & Sharpe #814U Valuemaster, power table traverse, 5C Collet chuck, 1980, #151809 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
8" x 14" Brown & Sharpe #814U Valuemaster, OD grinder,swing dowwn ID,power table,1977,#152366 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
8" x 15.75" Studer #S20-12, int.spdl., auto.infeed & plunge,clnt, 1985 Camera Spec Sheet rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
8" x 16" Churchill #OHX, 9"sw,8"grind dia.,10"grind whl dia.,3-190 IPM,tailstock,#23657 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
8" x 16" Tschudin #HTG-400, OD grinder,Super Precision workhead,12"whl,1967,#152321 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
8" x 20" Okamoto #OGM-820UST, swing down internal spdl,fully univ.DRO,well tooled,'00 Spec Sheet Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn
8" x 20" Shigiya #GU20-50, swg dwn ID/OD,14 x 2 x 5"whl,plunge,clnt,hyd./chiller,'86 Camera rfq
JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta
8" x 20" Shigiya #GU-20.50U, ID spindle, 1 owner, excellent, 1983 Camera rfq
Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe
8" x 20" Shigiya #GUA-20-50, drop down ID,hyd.tbl,auto infd,#2MT,1984,#150814 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
8" x 20" Supertec #G20P-45C11, w/internal grinding attachment, 2003 Camera Spec Sheet rfq
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth
8" x 24" Brown & Sharpe #13, tool & universal grinder, 8"swing, #8582 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel
8" x 24" Newport grinder, 3 HP main motor, ID attach., coolant sys, very nice Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt
8" x 26.77" Tschudin #HTG-610, ID/OD cylindrical grinder,paper filter clnt,nice,1987 Camera Spec Sheet rfq
R C M Industries Inc, Bayville, NY 516-628-0582 Richard Muller
9.5" x 18" Studer #S30-12, grinder rfq
Belter Machinery, Rockford, IL 815-654-3300 (Fax 815-633-3969) Gary Belter
9.8" x 18" Kondo #HI-GLOSS-450H-TS, hyd.tbl,auto infd,plunge,rpd,spk.timer,'85,#151151 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 12" Karstens ASA OD grinder,swing around ID,hand feeds,10"wheel,#4MT,1967,#149704 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 15" Kartsens universal rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
10" x 16" Cincinnati #R55, auto infd,plunge,rapids,wrkhd would accept 5C collets,'77 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green
10" x 16" Cincinnati Milacron #R-55, universal cylindrical grinder, hyd table, auto infeed, plunge, rapid, spkt, #151475 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 16" Cincinnati Milacron #R55, hydraulic,internal,pick feed,12"x1.5"wheel,1972 rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
10" x 18" Jackmill #JMC600-AGC, univ.head & table,vari-spindle cont,misc.tooling rfq
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Fax 715-886-3016) Fred Parker
10" x 18" Jones & Shipman #1311, OD grinder, #9069 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel
10" x 20" Brown & Sharpe #1, 10"x1/2"x3"whl,2500/3000/3600 RPM,1968,#15351 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
10" x 20" Brown & Sharpe #1, universal cylindrical grinder Camera Spec Sheet rfq
Industrial Surplus Inc, Berlin, CT 860-828-3541 (Fax 860-828-6747) Jack Guzewicz
10" x 20" B & S #1A, ID att,hyd.tbl,auto.infd/plng,rapid,sparkout,10"whl,'66,#145680 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 20" Landis #1R, hydraulic traverse, low price, 1968 Camera Spec Sheet rfq
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell
10" x 20" Landis #1R, universal,plunge,L & R traverse feed,excellent,1980 Camera rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
10" x 20" Landis #1R, cylindrical grinder Camera rfq
Gallery Of Machines, Marathon, NY 607-849-6028 (Fax 607-849-6000) Harry Hartman
10" x 20" Landis #1R, OD grinder,hyd.table,auto plunge,rapid,16"wheel,5 HP,sparkout timer,coolant,1966,#148006 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 20" Landis #1R, 3 HP, coolant, 12"x 1"x 5"wheel, 1969 rfq
Richards Machinery & Equip., Metairie, LA 504-834-7902 (Fax 504-834-7902) Red Freeze
10" x 20" Landis #1R, universal table,1-1/2"x 12"wheel,drop down ID,1973,#9340 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
10" x 20" Landis #1R, hyd.behind wheel dresser,hyd.long table feed,5 HP,16500 RPM internal grinding spindle speed,#26560 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
10" x 20" Landis #1R, hydraulic ID/OD cylindrical grinder,very good condition Camera rfq
Quality Rebuilding Corp, Valparaiso, IN 219-476-0281 (Fax 219-476-0283) Stu Smith
10" x 20" Landis #1R, universal ID/OD cylindrical grinder,auto plunge feed,1981,#4651 Camera Spec Sheet rfq
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan
10" x 20" Landis #1R, OD/ID cylindrical grinder Camera Spec Sheet rfq
F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward
10" x 20" Landis #1R, OD Grinder,hyd.table,2-Axis DRO,I.D.Attach.,1991,#149347 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 20" Landis #1R, hydraulic feeds, infeed, internal spindle, tooling rfq
Hoff Machinery, Inc, Minneapolis, MN 612-521-5700 (Fax 612-521-9358) Sales Dept.
10" x 20" Landis #1R, OD Grinder, hyd.table, auto plunge infeed, 16" wheel, 3 HP, 1967, #148616 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 20" Landis #1R, 12"wheel, auto infeed, pick feed, #12227 Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
10" x 20" Norton CTU semi-automatic universal cylindrical grinder, internal grinding spindle,good,S/N 2487 Camera Spec Sheet rfq
Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea
10" x 24" Brown & Sharpe #1024U, swing down ID,hyd.tbl,pick & plunge,rapid,'80,#149158 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 24" Cincinnati, swing down ID, plunge, hydraulic table, exc., 1962-68 (2) Camera rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
10" x 24" GER #CE-600, plungemspark-out,tarry,internatl spindle,coolant,exc.,1995 rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
10" x 24" Landis #1R, ID attachment, excellant condition, 1988 Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
10" x 24" Landis #2R, universal grinder, #9029 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel
10" x 24" Landis #2R, 12"wheel rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
10" x 24" Landis #2R, cylindrical grinder, 12"x 1"x 5" whl, 2-240 IPM,hyd.infeed,5 HP Camera Spec Sheet rfq
TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen
10" x 24" Landis #2R, universal plunge, HS & TS, excellent, 1980's Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
10" x 24" Landis #2R, universal grinder, auto plunge cycle, 1980's Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
10" x 24" Norton #U4, 10"x1"x3"wheel,180°workhead,90°grdg.head,3-144 IPM,#12184 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
10" x 24" Norton, hydraulic,internal SPL,6-jaw chuck,Trade school,S/N #P-2453 Camera rfq
Bibb Machinery Sales, Macon, GA 478-788-1975 (Fax 478-788-1978) Robert/ John
10" x 24" Norton, hydraulic, auto, drop down ID, swivel head & wheel, 1970's, #1281 Camera Spec Sheet rfq
Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall
10" x 24" Studer #S30-12, ID spindle, auto, tooled, ex-aerospace, 1982, #33604 rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Fax 818-788-2470) Sales Dept.
10" x 24" Tacchella #612U, universal cylindrical grinder, hydraulic table, #149885 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
10" x 27" Jones & Shipman #1300, auto infeed & plunge grinding,swing around internal grind attach,#JV-19585TK Camera rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury
10" x 27" Jones & Shipman #1300X, cylindrical grinder, #9028 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel
10" x 30" Kondo #TSO-U, swing down ID spindle, sparkout, auto.infeed, 1989 rfq
Continental Machinery Exch., Bridgeport, CT 203-334-2197 (Fax 203-334-1184) Paul Huber
10" x 30" SZIM #KU250-03/750, univ.cylindrical grinder,14"x1"wheel,coolant,1979,#2257 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
10" x 36" Landis #2R, hydraulic, internal, plunge, 12"x 1"wheel, 1981 Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
10" x 36" Landis #2R, ID/OD, 5 HP, Plunge & Hyd.infeed, Coolant, 1980'S, Nice Camera Spec Sheet rfq
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Fax 973-992-8334) Michael/ Dave
10" x 60" Kellenberger #1500U, ID spindle,coolant,reconditioned,1981,#1448 Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford
11" x 30" Ramco #LF-800H, cylindrical grinder,swing down internal grinding attachment,motorized workhead,tailstock,#9740 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
11" x 40" Ribon #RUR1000, +/- 5°,360°swivel,1-9 FPM long.table feeds hyd,#12155 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
11" x 40" Ribon #RUR-1000, universal cylindrical grinder,14"x1"x5"wheel,#41265 Camera Spec Sheet rfq
S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) Simon Srybnik
11" x 40" Toyoda #GU28-100, hydraulic,12"x 2"wheel,internal attach.,plunge,clnt,5 hp Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
11.6" x 24.8" Tos #BU28-360, hydraulic, internal, plunge, 16"x 1.5"wheel, 1980 Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
12" x 16" Parker Majestic #1, univ.cylindrical grinder,7 deg.tbl.swivel,3-31 IPM,3-1/2"cross fd trvl,1-1/4"hole thru spdl,'68 rfq
T.A.C. Assets, Fairborn, OH 937-477-7712 (Fax 937-376-8328) Larry Beam
12" x 16" Parker Majesteic #1C, I.D/O.D., power table, mag.chuck, #151807 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
12" x 24" Grisetti OD/ID universal grinder, hyd.table, tooling, very good condition Camera Spec Sheet  Show Video of Item rfq
Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard
12" x 24" Mello #UNS2/600, 12"grinding diameter,10000 RPM internal grinding attachment,#26308 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
12" x 30" Parker Majestic #2C, int/ext,DRO,8"chk,swg around internal/ext.whls,'97 rfq Auction
Surplus Asset Auctions LLC, Barrington, IL 630-690-7986 (Fax 630-690-7795) Mike Gordon
12" x 32" Lizzini #80-P3, power OTW Dresser, auto cycle, #4MT, 1980, #149904 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
12" x 36" Cincinnati #12X36, 50-500 RPM, 3-220 IPM Camera Spec Sheet  Show Video of Item rfq
Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler
12" x 36" Cincinnati Universal, pick feed, tarry L & R Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
12" x 36" Shigiya #GP32C90H, hydraulic,14"x 2"wheel,coolant,3 HP,1969,#17317 Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
12" x 40" Supertec #G32P-100CII, cylindrical universal grinder, #3567 Camera Spec Sheet rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner
12" x 40" Tos #BUB32/1000, hyd,ballscrew,auto cycle,PLC,20"x3"whl,13 HP,1993 Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
12" x 42" Shigiya #GUA30-100, internal spdl.,hyd.auto feeds,univ.whlhead,tailstock Camera rfq
Machinesused.com, Minneapolis, MN 763-745-1166 (Fax 763-745-1140) John Lawton
12" x 48" Cincinnati #UA12, internal spdl., 14"wheel, 1966 rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
12" x 60" Okamoto #OGM-12-60U, Fanuc 21-GA,3&4-Jaw chks,5C Collet,2003,#150650 rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
12" x 60" Summit #RT-Super, 12x60R,sw.dwn.int.att,steady,center rests,hyd tbl,pick fd Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
12" x 72" Cincinnati, IP/UP, 1960's Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
12" x 96" Jotes-Schaudt, swing down ID, plunge, hydraulic table, excellent, 1978 Camera rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
12.6" x 39.4" SMTW #M1432A, swing down ID,hyd.table,auto infeed,rapid,1995,#150499 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
12.6" x 40" Supertec #G32P-100CII, 16"wheel,1650 RPM,90°workhead,2003,#CK-19757 Camera Spec Sheet rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury
12.6" x 40" Supertec #G32P-100CII, OD grinder,PLC auto infeed,hyd.tbl,'05,#152427 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
13" x 27" Schaudt, universal heavy duty, #3826 rfq
DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins
13" x 40"-60" Lansing #13A, hyd.univ.cylindrical grinder,headstock/tailstock,#41915 Camera Spec Sheet rfq
S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) Simon Srybnik
13.78" x 18.9" Strausak CNC #57U-CNC-4UC, 3 internal attachments,26.77"X,10.24"Y,#26219 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
13.78" x 59" Kellenberger #1500U, OD/ID cylindrical grinder, rebuilt in Switzerland Camera Spec Sheet rfq
R C M Industries Inc, Bayville, NY 516-628-0582 Richard Muller
14" x 24" Landis #2R, swing down ID, cylindrical grinder Camera rfq
Gallery Of Machines, Marathon, NY 607-849-6028 (Fax 607-849-6000) Harry Hartman
14" x 24" Landis #3RH, coolant filtration system, hydraulic table traverse, 1981, #151412 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
14" x 30" Brown & Sharpe #2, ID att.,hyd.table,auto infeed,auto plunge,1952,#149450 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
14" x 30" Brown & Sharpe #2, internal grinding attach,orig paint,chuck,coolant,nice Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Roberts Machinery Sales, Ferndale, MI 248-543-4466 Kimball R Roberts
14" x 36" Landis #2R, Swing Down ID, 1973 Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
14" x 40" Brown & Sharpe #1440-OU, 14"wheel, 1983 rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
14" x 40" Brown & Sharpe #144OU, Hyd.table,auto infeed,dbl.swivel whlhd,1977,#149506 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
14" x 40" Tacchella #1018-UM, unv.cyl.grinder, Fagor DRO, loaded with tooling rfq
Inter-Plant Sales, Hugo, MN 612-281-3736 (Fax 651-207-8933) Rick Canniff
14" x 48" Cincinnati #14X48, Sine-bar grinder,14"sw,24"whl,Abbott VersaGrind,#3916 Camera Spec Sheet rfq
Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters
14" x 48" Cincinnati Milacron, universal cylindrical grinder, 1980 Camera rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales
14" x 48" Cincinnati Universal, Swing Down ID, 8" 3 jaw, Steadies, Center Rest Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
14" x 48" Cincinnati, 14"x 1"x 5"wheel,55-500 RPM,coolant,4-jaw chuck,1943,#13707 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
14" x 48" Cincinnati Milacron, swing down internal,steadies & chuck,lots of tlng,CPC Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
14" x 48" Landis #3R, universal grinder, ID attach., hyd.table, auto infeed, 1967, #151981 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
14" x 48" Landis #3R, universal cylindrical grinder, s/n #796-77, w/plunge Camera Spec Sheet rfq
Zedco Machinery Inc, Rochester, NY 585-458-6920 (Fax 585-458-1215) Leo Glogowski
14" x 48" Landis #3RH, ID attach., plunge, 16" GW, hyd.table, excellent, 1970 rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
14" x 52" Cincinnati, hydraulic, swivel table,taper,30"x 3"x 12"wheel,15 HP,tooling Camera Spec Sheet  Show Video of Item rfq
TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen
14" x 60" Elgin Titan hyd.univ.cylindrical grinder,#4 taper,24"x4"x8"wheel,#41091 Camera Spec Sheet rfq
S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) Simon Srybnik
14" x 60" Kellenberger #1500U, universal cylindrical,16"grinding wheel,2005 Camera rfq
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.
14" x 72" Cincinnati #ER, cylindrical grinder, 5 HP, 220 V., #5210 Spec Sheet rfq Click here to jump to our eBay auction
RBI Equipment Sales & Surplus, Spartanburg, SC 864-641-7333 (Fax 800-547-3187) Kyle Renfrow
14" x 72" Cincinnati #OE14LX72, univ.hyd.cylindrical grinder w/internal grinding attach.,mtrzd workhead,coolant,tlstk,#A2781 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
14" x 72" Cincinnati, 1961 Camera rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales
14" x 72" Landis #3R, ID, 14" GW, 5 HP, extras, nice machine, 1973 rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
14" x 72" Landis #CH, hydraulic table, 14"wheel, live/dead wkhd, Ser.#527-20, 1954, #149305 rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
14" x 72" Norton #U4, universal grinder w/drop down ID, #56800 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
14" x 80" SMTW #1342B, univ.cylindrical,14"grinding whl,swivel work & wheelhead,'90 Camera rfq
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.
14" x 120" Norton #LC-5, semi-automatic,30"x3"wheel,20 HP,DRO,coolant,1968,#1431 Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford
16" x 21" Shigiya Seiki #GU-40B-60A, plunge,16"x4"wheel,auto cycle,7.5 HP,1989 Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
16" x 32" Weldon #1632, CNC OD/ID grinder,Fanuc 18GC,#5 MT,16"x3"wheel Camera Spec Sheet rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns
16" x 60" Victor #JMC1500AGC, 3-work rests, telescope way covers, 1997 Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg
16" x 78" Tos Hostivar #BHU40/2000, intern.attachment, 8"mag.chuck, 1974 Camera  Show Video of Item Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg
18" x 36" Cincinnati #DE, 14"wheel,wheel swivel,table taper,dresser,1978,#23525 Camera Spec Sheet rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin
18" x 48" Cincinnati #DE, universal w/internal, 18"wheel, 200 RPM, #3929 rfq
Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters
18" x 48" Landis #3R, hyd.table, auto infeed, 14"wheel, 1965, #148995 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
18" x 60" Kellenberger #1500U, under power Camera rfq
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul
18" x 65" Kellenberger #1500U, universal grinder, coolant, 1970 Camera Spec Sheet rfq
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul
18" x 65" Kellenberger #1500U, ID/OD universal, plunge & pick, coolant, 1975 Camera Spec Sheet rfq
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul
18" x 72" Cincinnati #18X72, Universal grinder,18"sw,14"whl,vari-speed,#3915 Camera Spec Sheet rfq
Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters
18" x 72" Cincinnati Milacron #DE, tbl tarry & pick feed,combo live-dead hdstck,'77 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn
18" x 72" Cincinnati OD ID grinder w/attachments, hyd,18"grind.wheel,01/1973,#9998 Camera rfq
Expert Machine Repair & Sales, Fraser, MI 586-296-2250 (Fax 586-296-9620) Jeff Novak
18" x 72" Cincinnati, univ.,w/ID,auto table,live & dead center headstock,1968 Camera rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
18" x 72" Landis #3RH, universal cylindrical grinder,swing down internal spdl,#13086 Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
18" x 72" Landis #CH, universal cylindrical grinder, stock #50953 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
18" x 72" Landis, ID Spindle, Lots of Tooling, Excellent Running Machine Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
18" x 72" Norton #U4, 14"wheel, ID spindle, 5 HP, 1970, #15503 Camera Spec Sheet rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.
19" x 47" Okuma, universal ID attach., running in plant, 1983 Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
19" x 78" Schaudt #UR, universal hydraulic cylindrical grinder,14"wheel,5 HP,#13171 Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
20" x 24" Kellenberger #600U, left & right OD/ID, 2-Axis DRO, auto lube, table rest Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
20" x 65" Newall #BX, semi-auto cylindrical grinder w/ID attachment, 20-500 RPM, #14 Jarno taper, #26927 Camera Spec Sheet rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
20" x 70" Newall #2070, universal cylindrical grinder, Sony 3-Axis DRO, 1983, #5814 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
20" x 144" Naxos Union #W500/3500, 28"whl,swivel tbl,steadies,side feed,#21752 Camera Spec Sheet  Show Video of Item rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin
21" x 80" SMTW, 20 HP,live/dead workhead center,swivel tbl,(4) SR,30"x3"whl,clnt,'89 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn
24" x 48" Landis #3RH, univ.cylindrical grinder,swivel table & carriage,1976,#11734 Camera rfq
Don Lewis Machinery & Equip, Thousand Oaks, CA 805-987-4160 (Fax 805-987-4170) Don Lewis
24" x 72" Warner & Swasey #U4, swing down ID, hyd.table, auto infeed, 1977, #151501 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Andrew Valitt
24" x 100" Cincinnati #24P, cylindrical grinder, 24"wheel, #3919 Camera Spec Sheet rfq
Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters
24" Kellenberger #URF320, OD/ID/face grinding spdls,rests,24"swing,chucking only Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
25" x 36" Cincinnati, 1956 Camera rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales
26" x 72" Cincinnati, swing down internal spindle avail,I/P,U/P,reconditioned 2010 Camera rfq
Seminole Machinery Company, Clinton Township, MI 586-465-9700 (Fax 586-465-6226) Dan Patrona
30" x 72" Landis #3RH, Plunge, ID Attachment, 14" G.W., 1972, Government rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
30" x 72" Landis #3RH, 14"wheel, ID spindle, 5 HP, 1989, #15349 Camera Spec Sheet rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.
48" x 72" Landis #CHW, Plunge, TruForm Dresser, 1982, Government rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Fax 586-771-5958) Sales Dept.
48" x 84" Cincinnati cylindrical grinder rfq
Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Fax 631-694-9415) Irv Richlin
48" Norton Hi-Swing Univ, 48"max.dia,chucking type,30"whl,15 HP,DRO,Aerospace (2) Camera Spec Sheet rfq
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate
70" x 180" Naxos-Union #RS-1000, roll grinder,36"wheel,wheel dresser,swiveling type wheelhead,steady rest,good,1950's Camera rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
Clausing #4210, univ.cyl.grinder,5"swg,14"tbl trvl,10"x1"x3"whl,3 HP,5C collet,'74 Camera Spec Sheet rfq
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn
Crystal Lake OD grinder, $4500.00 Camera rfq
Quality Rebuilding Corp, Valparaiso, IN 219-476-0281 (Fax 219-476-0283) Stu Smith
Fortuna #RME-200 w/Engis Diaform B pantograph whl dresser,14"whl,hub,collets,no tlstk Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick
Norton #509, cylindrical grinder Camera Spec Sheet rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
Studer #RHU-650C, univ.cyl.grinder, 10°swivel,5-1/4"x49-1/2"tbl,#039A-150 rfq
Industrial Surplus Inc, Berlin, CT 860-828-3541 (Fax 860-828-6747) Jack Guzewicz

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise