41 Results
JUST ADDED!
Biesse #Akron-1430A, Edgebander, 0.4-12 mm strip edge thickness, 5.5" x 3.3" panel, 10-60 mm panel thickness, 3 HP feed motor, 39 FPM, 440 Volt, 2016
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON 1430
Year: 2016
BIESSE AKRON 1430A EDGEBANDER. -- : 0.4 - 3 mm Thickness coil edgebanding,.0.4 - 12 mm thickness of strips (HPL, veneer, solid wood strips). -- Panel thickness minimum 10 mm and 60 mm maximum. Minimum panel length 140 mm. (5.5"), minimum panel width 85 mm (3.3). -- Automatic strip & coil feed magazine with 3 mm ...more
Biesse #Akron-1440A, edge bander with PUR
Machinery Associates Inc | Hudson, NH
Category: Woodworking Edgebanders
Seller: Machinery Associates Inc
Location: Hudson, NH
Mfr: Biesse
Model: AKRON-1440A
Year: 2018
Biesse "Akron 1440 A" Edgebander, This machine will do PUR pucks or EVA granuals, Min. panel height: 10 mm, Max. panel height: 60 mm, Height of edgebanding material: 14-64 mm, Thickness of edgebanding material in rolls: 0.4-3 mm, Thickness of edgebanding in strips: 0.4-12 mm, Min. panel protrusion from the track: 25 ...more
Biesse #Akron-245, Edgebander, 2007
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: AKRON-245
Year: 2007
Biesse Akron 245 Edgebander, System is still under power until approx mid-October 2024., Touch PLC will need to be replaced. Everything else is working good on the machine. Owner has had it serviced by Biesse.
Biesse #Akron-245, Edgebander, .33 HP, 12000 RPM, 39 FPM, 600 V., 2003
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-245
Year: 2003
BIESSE AKRON 245 Edgebander with Corner Rounding: Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.: -- 0.4 - 8 mm (5/16") Cap. Edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.: -- Adjustable top pressure beam ...more
Biesse #Akron-245, Edgebander, 2007
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: AKRON-245
Year: 2007
Biesse Akron 245, Machine was in good working condition when removed from service. Computer works, but the screen does not.
Get email updates for newly added Woodworking Edgebanders
Woodworking edge banders are used in furniture and cabinetry to apply a protective, decorative edge to materials like plywood and MDF. They seal exposed edges, improving durability and appearance. With automated trimming and glue application, these machines ensure precision and efficiency, commonly used for producing finished wood products like furniture and cabinets.
Biesse #Akron-246, Edgebander w/Corner Rounding, 0.4-8 mm Edge Thickness, 85 mm width x 140 mm L min Panel Size, 10-50 mm Panel thickness, 39 FPM, 2006
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-246
Year: 2006
BIESSE - AKRON 246: EDGEBANDER WITH PRE-MILL AND CORNER ROUNDING0.4 - 8 mm (5/16") Cap. Edgebanding thickness; min. panel width: 85 mm; min. length: 140 mm; panel thickness: 10 - 50 mm; automatic strip & coil feed magazine with: Robust shear type 3 mm PVC guillotine.: -- Adjustable top pressure beam positioning. ...more
Biesse #Akron-440, Edge bander, premill, top & bottom trim, corner round, edge scrape, glue scrape, buffing unit, 2013
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: AKRON-440
Year: 2013
Biesse Akron 440 Edgebander, Premill, Top & Bottom Trim, Corner Round, Edge Scrape, Glue Scrape, Buffing Unit, 12-18 m/min Feed Speed, All work units are servo controlled.
Biesse #Akron-440AX, pre-mill & corner rounding edgebander, 2007
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-440AX
Year: 2007
BIESSE AKRON 440 AX EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Material infeed for strips & coiled edge material like: PVC, ABS, veneer, and solid wood. -- Edge & Workpiece Capacity: 0.4 - 3 mm (0.016 - 0.12") Edge; 10 - 60 mm (0.39 - 2.36") panel thickness; 140 mm (5-1/2") min. panel length, and 85 mm ...more
Biesse #Akron-855, Edgebander w/Pre-mill Corner Rounding, .4-15 mm edge thickness, 14-65 mm height, 10-60mm panel thickness, 2006
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-855
Year: 2006
BIESSE - AKRON 855,.Edgebander with Premill & Corner Rounding (Loaded!): -- Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness; 14 - 65 mm (0.55" - 2.56") edge height; 10 - 60 mm (0.39" - 2.36") panel thickness; 140 mm (5-1/2") min. panel length; 85 mm (3.3") min. panel width. Infeed ...more
Biesse #Akron-1330, Edgebander, w/ Premill, corner round, hot melt glue, end trim, 2015
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: AKRON-1330
Year: 2015
Biesse Akron 1330 Edgebander, Premill, Corner Round, Hot melt glue system, End trim, Machine has been checked out by a Biesse tech and reported to be in good working condition.
Biesse #Akron-1330, Edgebander w/ Pre-Mill, 2014
iBid Machinery | Roswell, GA
Category: Woodworking Edgebanders
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Biesse
Model: AKRON-1330
Year: 2014
Product : 2014 Biesse Akron 1330 Edgebander w/ Pre-Mill - Washington, Machine Location State: Washington, Machine Location City: Kent, Year: 2014, Make: Biesse, Model: Akron 1330, Serial No: 43690, Phase/Voltage: 3PH, Condition: Very Good Used Condition, Any Known Issues: No, In Production:, Product Type: Edgebander ...more
Biesse #Akron-1330, pre-mill & corner rounding edgebander, 2015
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-1330
Year: 2015
BIESSE AKRON 1330 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- : Computer controlled interface for workstations with servos and pneumatic positioning devices. Programmable selections for 1-touch changeover between edgebanding types and thicknesses.Top Pressure Beam with automatic adjustment from the machine ...more
Biesse #Akron-1330, CNC edge bander, touchscreen Control panel, 2023
Equipment Hub | Decatur, GA
Category: Woodworking Edgebanders
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Biesse
Model: AKRON-1330
Year: 2023
Stock #: 111260002, Location: CA, Brand: Biesse, Model: Akron 1330, Year: 2023, Loading Fee: Rigging Required, Panel Height: 10 - 60 mm, Edge Height: 14 - 64 mm, Edge Thickness (Rolls):.4 - 3 mm, Edge Thickness (Strips):.4 - 5 mm, Panel Overhand from Track: 25 mm, Panel Length: 150 - 3200 mm, Track Feed Speed: 12 ...more
Biesse #Akron-1330-A, Edgebander, 0.39"-1.96" panel thickness, 3 HP, 32-65 FPM, 2014
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-1330-A
Year: 2014
BIESSE - AKRON: 1330 Edgebander (with Premill & Corner Rounding) -- Computer controlled interface for workstations with: Servos and pneumatic positioning devices; programmable selections for 1-touch changeover between edgebanding types & thicknesses.Top Pressure Beam with: Automatic adjustment from the machine ...more
Biesse #Akron-1430, edge bander, heavy duty guillotine, standard EVA glue system, 2014
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Edgebanders
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Biesse
Model: AKRON-1430
Year: 2014
2014 Biesse Akron 1430 used edgebanderFor pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
Biesse #Akron-1440, Single-Side Edgebander w/Pre-mill & Corner Rounding, 0.4-3 mm Edge thickness, 10-60 mm Panel height, 12000 RPM, 2014
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-1440
Year: 2014
BIESSE AKRON 1440 SINGLE SIDE EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + with "PUR & EVA" TECHNOLOGY: -- : Latest Technology combines productivity, efficiency, and flexibility for all types of edgebanding material.Working Capacity: -- Min. panel height: 10 mm; Max. panel height: 60 mm; Height of edgebanding ...more
Biesse #Akron-1440A, single sided edge bander with corner rounding & pre-milling, 2016
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Edgebanders
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Biesse
Model: AKRON-1440A
Year: 2016
2016 Biesse Akron 1440A used edgebander with Corner Rounding and Premilling ++For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
Biesse #Akron-1440A, edge bander with corner rounding and premilling, Smart Touch Control panel, 2017
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Edgebanders
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Biesse
Model: AKRON-1440A
Year: 2017
*Reduced Price* 2017 Biesse Akron 1440A used edgebander with Corner Rounding and Premilling ++For pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing ...more
JUST ADDED!
Biesse #Akron-855, edgebander w/ pre-mill & corner rounding
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON-855
BIESSE - AKRON 855: Edgebander (w/Premill & Corner Rounding) -- Edge & workpiece Capacity: 0.4 -15 mm (0.016" - 0.59"); Edge thickness: 14 - 65 mm (0.55" - 2.56"); edge height: 10 - 60 mm (0.39" - 2.36"). Panel thickness:140 mm (5-1/2") Min. panel length; 85 mm (3.3") min. panel width.Infeed Section -- ...more
Biesse #Jade-240, edgebander
Machinery Associates Inc | Hudson, NH
Category: Woodworking Edgebanders
Seller: Machinery Associates Inc
Location: Hudson, NH
Mfr: Biesse
Model: JADE-240
Year: 2016
Ideal for multiple different edging applications, up to 12mm solid-wood lipping, veneer, melamine, PVC, ABS and laminates., Capable of up to 12mm thick solid wood strips, 2 motor, counter-rotating Pre-Mill, Glue and band application, 2 motor end trimming, Top and Bottom profile trimmers with Bevel, 1mm radius, 2mm ...more
Biesse #Jade-240, edgebander w/ pre-mill & corner rounding, 2022
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: JADE-240
Year: 2022
BIESSE - JADE 240: Edgebander (with Premill & Corner Rounding) -- Edgebanding thickness: 0.4 - 8 mm (0.01" - 0.31"); Min. panel width: 85 mm (3-1/2"); min. length: 150 mm (5.9"); max. panel thickness: 10 - 60 mm (0.39 - 2.36"). -- Premill Unit (2) 1.8 kW (2.4 HP) - 12,000 RPM Motors; "AUTO-SET" device ensures ...more
JUST ADDED!
Biesse #Lato-28, edgebander, PLC Control, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: LATO-28
Year: 2005
BIESSE - LATO 28: Edgebander, PLC Controlled. -- :Top pressure beam with: Large, staggered rubber rollers on precision bearings. -- Panel thickness: 10 - 45 mm; panel width: 50 mm Min.; panel length: Min. 150 mm; edgeband thickness (coils): 0.4 to 3 mm; edgeband thickness (strips): 8 mm Max.; track speed: 36 FPM. -- ...more
JUST ADDED!
Biesse #Polymac-Akron-246, CNC Edgebander, 39 FPM, 2.17" thick max edge, 2005
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: POLYMAC-AKRON-246
Year: 2005
Pressure Beam Type: Rollers, Pre-Milling Station: 2 Motors, Glue Station, Pressure Rollers: 4, End Trimming Station: Straight & Bevel (2 motors), Rough Milling Station: 2 Motor, Fine Milling Station: 2 Motor, Corner Rounding Station: 2 Motor, Flat Scraping Station: Top & Bottom, Profile Scraping Station: Top ...more
Biesse #Polymac-Akron-246 CNC Edgebander, 2005 - Corner Rounding, Pre Milling, New Motors, Under Power
Revelation Machinery | Chicago, IL
Category: Woodworking Edgebanders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Biesse
Model: POLYMAC-AKRON-246
Year: 2005
Make: Biesse, Model: Polymac Akron 246, Year: 2005, Machine Location: Arizona, Pressure Beam Type: Rollers, Pre-Milling Station: 2 Motors, Glue Station, Pressure Rollers: 4, End Trimming Station: Straight & Bevel (2 motors), Rough Milling Station: 2 Motor, Fine Milling Station: 2 Motor, Corner Rounding Station: 2 ...more
Biesse #Polymac-Akron-246, Edgebander W/Corner Rounding and Pre Milling, 2005
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: POLYMAC-AKRON-246
Year: 2005
Pressure Beam Type: Rollers, Pre-Milling Station: 2 Motors, Glue Station, Pressure Rollers: 4, End Trimming Station: Straight & Bevel (2 motors), Rough Milling Station: 2 Motor, Fine Milling Station: 2 Motor, Corner Rounding Station: 2 Motor, Flat Scraping Station: Top & Bottom, Profile Scraping Station: Top ...more
Biesse #Polymac-Akron-840, Edgebander with Pre-Mill, end trim, corner rounder, 230 VAC, 22 kw, 2007
iBid Machinery | Roswell, GA
Category: Woodworking Edgebanders
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Biesse
Model: POLYMAC-AKRON-840
Year: 2007
Product : 2007 Biesse Polymac Akron 840 Edgebander with Pre-Mill - Michigan, Machine Location State: Michigan, Machine Location City: Grand Rapids, Year: 2007, Make: Biesse Polymac, Model: Polymac Akron 840, Serial No: 86301, Phase/Voltage: 3PH 230 V/ See Plate in photos, Condition: Good Used Condition/Normal Wear and ...more
Biesse #Polymac-Akron-855, Edgebander, 2006
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: POLYMAC-AKRON-855
Year: 2006
Manufacturer, premill, hot glue, end trim, top/bottom trim, corner rounding, scraping, buffing, Computer interface.
Biesse #Polymac-Lato-38, CNC Edgebander Machine, 0.39"-2.36" panel thickness, 2006
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: POLYMAC-LATO-38
Year: 2006
Min. Panel Thickness: 0.39″, Max Panel Thickness: 2.36″, Height of Edge-Band Material: 0.55-2.51″, Min. Banding Thickness: 0.01″, Max Banding Thickness: 0.39″, Min. Panel Length: 5.51″, Min. Panel Width: 1.96″, 2 Feed Speeds: 39ft/min & 59ft/min, Electrical: 230V, 60Hz ...more
Biesse #Rover-B-Edge-1967, CNC with Edgebanding, 2021
iBid Machinery | Roswell, GA
Category: Woodworking Edgebanders
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Biesse
Model: ROVER-B-EDGE-1967
Year: 2021
Product : 2021 Biesse Rover B Edge 1967 CNC with Edgebanding - Missouri, Machine Location State: MO, Machine Location City: Neosho, Year: 2021, Make: Biesse, Model: Rover B Edge 1967, Serial No: 1000043887, Phase/Voltage: 3PH 460V See plate in photos, Condition: Very Good Used Condition, Any Known Issues: No, In ...more
Biesse #Rover-B-Edge-1967, CNC Router w/ Edgebanding, 2021
iBid Machinery | Roswell, GA
Category: Woodworking Edgebanders
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Biesse
Model: ROVER-B-EDGE-1967
Year: 2021
Product : 2022 Biesse Rover B Edge 1967 CNC Router with Edgebanding - Missouri, Machine Location State: Missour, Machine Location City: Neosho, Year: 2022, Make: Biesse, Model: Rover B Edge 1967, Serial No: 1000052388, Phase/Voltage: 3PH, Condition: Excellent Used Condition, Any Known Issues: No, In Production: Yes ...more
Biesse #Roxyl-5.5, pre-mill & corner rounding edgebander, .87" capacity, 33-65 FPM, 2014
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: ROXYL-5.5
Year: 2014
Capacity;, Edge thickness; strips (0.4 - 22mm), Edge Thickness; coiled stock; (0.4 - 3mm), Panel thickness; 10 - 60 mm (0.39 - 2.36"), Work piece width min.;85 mm (3.34"), Work piece length min.; 140 mm (5.51"), Feed speeds 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM), Machine Layout, Motorized top beam positioning ...more
Biesse #Roxyl-5.5, pre-mill & corner rounding edgebander, .87" capacity, 33-65 FPM, 2014
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: ROXYL-5.5
Year: 2014
BIESSE ROXYL 5.5 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + "AIR FORCE" PUR/EVA GLUING TECHNOLOGY: -- s: Latest Technology combines productivity, efficiency, and flexibility for all types of edgebanding material. "AirForce" emits high temperature compressed air through a slot nozzle directly onto the reactive ...more
Biesse #Roxyl-5.5, edgebander w/ pre-mill & corner rounding, 2013
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: ROXYL-5.5
Year: 2013
BIESSE - ROXYL 5.5: Edgebander (w/Premill & Corner Rounding)Edgebanding Cap. - Edge thickness for strips: Min./max.: 0.4 - 22 mm (0.02" - 0.87"); coiled material from: 0.4 - 3 mm (0.02 - 0.12"); panel thickness from: 10 - 60 mm (0.39 - 2.36"); workpiece width; Min.: 85 mm (3.34"); workpiece length min.: 140 mm ...more
Biesse Spark-3.3, Compact Edgebander, 3 mm material thickness, 10 mm - 40 mm panel thickness, 90 mm min. panel width, 140 mm min. L, 2019
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: SPARK 3.3
Year: 2019
BIESSE SPARK 3.3 Edgebander (Compact)0.4 mm to 3 mm Material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm. Min. panel width 90 mm, min. panel length 140 mm.: -- 2 Liter Glue Teflon coated tank with quick heating system. -- Top pressure beam with manual adjustment through numerical read-out ...more
Biesse Spark-3.3, Compact Edgebander, 3 mm material thickness, 10 mm min. panel thickness, 40 mm panel thickness, 90 min width, 140 mm min. L, 2016
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: SPARK 3.3
Year: 2016
BIESSE SPARK 3.3 Edgebander (Compact)0.4 mm to 3 mm material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm. Min. panel width 90 mm, min. panel length 140 mm.: -- 2 Liter Glue Teflon coated tank with quick heating system. -- Top pressure beam with manual adjustment through numerical read-out ...more
Biesse #Stream-A/6.0 Edgebander, w/ Pre-Mill & Doucet BT3 Return, 2020
iBid Machinery | Roswell, GA
Category: Woodworking Edgebanders
Seller: iBid Machinery
Location: Roswell, GA
Mfr: Biesse
Model: STREAM-A/6.0
Year: 2020
Product : Biesse Stream A/6.0 Edgebander with Pre-Mill (2020) and Doucet Return - Indiana, Machine Location State: Indiana, Machine Location City: Marion, Year: 2020, Make: Biesse, Model: Stream A and Doucet BT3 Return, Serial No: see info in photos, Phase/Voltage: 3PH, Condition: Excellent Used Conditio, Any Known ...more
Biesse #Stream-A6.0-Edgebander-A1, NC 401 PC based Control, automatic strip feed magazine, 2017
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: STREAM-A6.0-EDGEBANDER-A1
Year: 2017
Machine Equipped as follows:, NC 410 PC Based Controller, Keyboard with Floppy Drive, Automatic Strip Feed Magazine, Belt Driven Top Pressure Beam, Multi-Coiled Infeed Magazine, RT63 Pre-Milling Unit, SP20 Glue System w/ Pre-Melt Unit, Hot Air Gluing system, Automatic Infeed Pressure System, T45 Front & Rear End ...more
JUST ADDED!
Biesse #Stream-B1, edgebander w/ pre-mill & corner rounding, 2003
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: STREAM-B1
Year: 2003
BIESSE - STREAM B1 9.5 Edgebander (w/Premill & Corner Rounding) -- Edge thickness cap.: 0.01' - 0.8" (0.3 - 20 mm); Min. panel width: 2-1/2" (65 mm); panel thickness: 0.4" - 2.4" (10 - 60 mm); min. panel length: 6" (150 mm). Automatic 2-coil vertical feed magazine for coil material: Up to 3 mm thickness with ...more
Biesse #Stream-B1-9.0, edgebander, 0.4-15mm edge thick capacity, 10-60mm panel thick, 100mm x 150mm min panel size, premill, glue station, trimmers, 2003
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: STREAM-B1-9.0
Year: 2003
Biesse Stream B1 9.0 Edgebander With Doucet Return Conveyer, 0.4 mm - 15 mm edge thickness capacity100 mm minimum panel width10 mm - 60 mm panel thickness150 mm minimum panel lengthExternal edgebanding storage and feeding magazinePremill Two (2) motorsGlue station Pre-melt hopper Glue application roller Pressure ...more
JUST ADDED!
Biesse #Stream-SB11.0, Soft Edge Bander, 60mm thick panel, Sinitra Control, 131 FPM, sound attenuated enclosure
RT Machine | Hughesville, PA
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Biesse
Model: STREAM-SB11.0
DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and ...more
JUST ADDED!
Biesse #Stream-SB2-9.5, Double-Side Sizing & Edgebanding Machine, 60mm thick panel, Sinitra Control, 131 FPM, sound attenuated enclosure
RT Machine | Hughesville, PA
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Biesse
Model: STREAM-SB2-9.5
Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and ...more
