49 Results
8.5" x 14.5" Roll-in #EF1459, vertical bandsaw, 18-1/2" x 30" table, gravity feed system, 1994
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Roll-In
Model: EF1459
Year: 1994
Feed System Gravity Feed Blade Travel 9 into work Cutting Capacity at 90 Round: 8.5" Rectangle: 14.5" x 8.5" Miter Cut Angle Range 0 - 45 (Material Can Rotate 45 In Clamp) Bevel Cut Angle Range no Capacity Under Guides 14.5 inches Throat 8.75 inches Blade Size (Ships With Saw) 3/4 Width x 8/12T x 10' Length.035 ...more
10" x 13" Baxter Verticut #115C, Vertical Bandsaw, 3/4" x 10' blade, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baxter
Model: 115C
Round Cutting Capacity 10 inches Round with maximum 8 1/2 (216 mm) length Cutting Capacity 13 inches Round at 45 degrees Cutting Capacity 7 inches Rectangular Cutting Capacity 10" x 13" Rip cutting width 9 inches Blade Size 1/4" to 3/4" x 10' Blade Speeds 75, 130, 215, 350 feet/min Blade Tension 30,000 psi Table ...more
10.2" x 5.9" Hemsaw #260BSA, Carif Double Utility Miter Band Saw, 1" X 96-1/2" X .035" blade, semi-automatic, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: 260BSA
Saw Double Miter, Horizontal, Utility Band Saw Saw Capacity 0-10.2" W x 0-5.9" H (Rectangular), 0-8.7" (Round Diameter), 0-5.9" (Square) Miter Capacity 5.9" W x 5.9" H @ 45 (L) 4.7" W x 3.9" H @ 45 (R) 3.5" W x 2.4" H @ 60 (L) Arm Miter Dual 45 Miter / One-Way 60 Miter. Release the lock and manually move the saw head ...more
12" Craftsman, vertical bandsaw, tilting head 45° with stock stand
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Craftsman
WIDTH------------------------------------3/16 in, GAUGE------------------------------------.025, TPI--------------------------------------10, VOLTAGE----------------------------------120, AMPS-------------------------------------7.9, WORK SURFACE-----------------------------23 in x 27 in, TILT ...more
12.6" x 8.6" Hemsaw #320BSA, Carif Double Miter Band Saw, 1" x 119" x .035" blade, semi-automatic, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: 320BSA
Saw Horizontal Pivot Band Saws Saw Capacity 12.6" W x 8.6" H @ 90 (10.8" round), 0-12.6" W x 0-8.6" H (Rectangular), 0-8.6" (Square) Miter Capacity 7.3" W x 8.7" H @ 45 (L) 7.9" W x 3.9" H @ 45 (R) 4.7" W x 8.7" H @ 60 (L) Operation Semi-Automatic Blade Size 9' 11" L x 1" H x.035" Blade Drive 3 HP 440V (3-Phase) ...more
Get email updates for newly added Vertical Band Saws
Vertical Band Saws (also known as upright band saws) are cutting machines with a vertically mounted blade used to cut materials like wood, metal, or plastic. Commonly used in industries like woodworking, metalworking, and manufacturing, they are ideal for intricate cuts, contours, and irregular shapes. Vertical band saws are essential for precision cutting and versatile material shaping in various fabrication processes.
18" x 20.75" Hemsaw #VT100HLA-60-CTS, Vertical Hydraulic Automatic Bandsaw, 1-1/4" 15' 6" x .042" blade, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT100HLA-60-CTS
* Saw: Vertical Tilt-Frame, Automatic Production Band Saw, * Saw Capacity: 18" W x 20.75" H @ 90 (22-1/4 w/o cant), * Miter: 18" W x 14.25" H @ 45 (L) (15.25” w/o cant) 18" W x 14" H @ 45 (R) (15.125” w/o cant) 18" W x 9.75" H @ 60 (L) (10.25” w/o cant) 18" W x 6.75" H @ 60 (R) (7.25” w/o ...more
18" x 20.75" Hemsaw #VT100HLM-60-CTS, Vertical Hydraulic Manual Bandsaw, 1-1/4" 15' 6" x .042", NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT100HLM-60-CTS
Saw Vertical Tilt-Frame Production Band Saw Saw Capacity 18" W x 20.75" H @ 90 (22-1/4 w/o cant) Miter 18" W x 14.25" H @ 45 (L) (15.25 w/o cant) / 18" W x 14" H @ 45 (R) (15.125 w/o cant) / 18" W x 9.75" H @ 60 (L) (10.25 w/o cant) / 18" W x 6.75" H @ 60 (R) (7.25 w/o cant) Blade Size 1-1/4" x 15'6" x.042 THK Arm ...more
18" x 20.75" Hemsaw #VT100LM-60, High Speed Production Manual Vertical Bandsaw, 5 HP, 220V, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT100LM-60
Saw Vertical Tilt-Frame Production Band Saw Saw Capacity 18" W x 20.75" H @ 90 (22.25 H w/o cant) Miter 18" W x 14.25" H @ 45 (L) (15.25 H w/o cant) / 18" W x 14" H @ 45 (R) (15.125 H w/o cant) / 18" W x 9.75" H @ 60 (L) (10.25 H w/o cant) / 18" W x 6.75" H @ 60 (R) (7.25 H w/o cant) Blade Size 1-1/4" x 15'6" ...more
18" x 21.25" Hemsaw #VT100LM-45, High Speed Production Manual Vertical Bandsaw, 5 HP, 220V, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT100LM-45
Saw Vertical Tilt-Frame Production Band Saw Saw Capacity 18" W x 21.25" H @ 90 (22.25 H w/o cant) Miter 18" W x 14" H @ 45 (left miter) (15 H w/o cant) / 18" W x 14" H @ 45 (right miter) (15 H w/o cant) Blade Size 1-1/4" x 15'0" x.042 THK Arm Cant 2 degree can be removed by adjusting arm Blade Drive 5 HP, 220V (22 ...more
18" x 24" Hem Saw #VT-120-HA, Vertical Bandsaw, 300 FPM, 7.5 HP, 72" Shuttle Feed
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hem
Model: VT-120-HA
, Feeds right to left, 72 shuttle feed, Full CNC programmable control, 4 canted head, Powered guide arm, Hydraulic vises, hydraulic feed, Coolant system, Manual chip auger, Bundle cylinders.
18" x 24" HEM #VT120HA-60 Smart saw, automatic vertical band saw with mitering, coolant system, 2008
Perfection Industrial Sales | Elk Grove Village, IL
Category: Vertical Band Saws
Seller: Perfection Industrial Sales
Location: Eldridge, IA
Mfr: Hem
Model: VT120HA-60
Year: 2008
Capacities 90° Saw Capacity: 18" x 24"45° Left Miter: 18" x 16"45° Right Miter: 18" x 14.75"60° Left Miter: 18" x 10"60° Right Miter: 18" x 9"Blade Size: 1.25" x 16'6" x 0.42"Arm Cant: 3°Brush Size: 0.5" x 4"Variable Speed Drive: 65-400 SFPMDrive Motor: 7.5 HPHydraulic System: 5 HP ...more
18" x 24" Hemsaw #V120HA, vertical bandsaw, 20" diameter wheel, 1-1/4" x 16' x .042" blade, S/N 541997, 1997
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V120HA
Year: 1997
SAW CAPACITY:18 in Horizontal, 24 in Vertical @ 90 degrees, MITER: 18 in Horizontal, 16 in Vertical @ 45° (left miter), 18 in Horizontal, 14.75 in Vertical @ 45° (right miter), BLADE SIZE: 1-1/4 in x 16 ft0 in x.042 THK, BLADE DRIVE: 7.5 HP, 220V/440V AC, 3 ph, 1,800 rpm, ball bearing TFC, HYDRAULICS: 2 HP ...more
18" x 24" Hemsaw #V120HA, vertical band saw, 65-400 SFPM, 1998
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V120HA
Year: 1998
SAW CAPACITY:18 in Horizontal, 24 in Vertical @ 90 degrees, MITER: 18 in Horizontal, 16 in Vertical @ 45° (left miter), 18 in Horizontal, 14.75 in Vertical @ 45° (right miter), BLADE SIZE: 1-1/4 in x 16 ft0 in x.042 THK, BLADE DRIVE: 7.5 HP, 220V/440V AC, 3 ph, 1,800 rpm, ball bearing TFC, HYDRAULICS: 2 HP ...more
18" x 24" Hemsaw #VT120HA-60-CTS, hydraulic vertical bandsaw, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT120HA-60-CTS
STANDARD S:, Saw: Vertical Tilt-Frame, Automatic Production Band Saw, Saw Capacity: 18" W x 24" H @ 90 Miter: 18" W x 16" H @ 45 (L) 18" W x 14.75" H @ 45 (R) 18" W x 10" H @ 60 (L) 18" W x 9" H @ 60 (R), Blade Size: 1-1/4" x 16'6" x.042” THK, Arm Cant: 4 degree – non-adjustable, Blade Drive: 7.5 HP ...more
18" x 25" Marvel #81APC, vertical bandsaw, 15' 6" x 1-1/4" blade, 60-400 FPM, S/N 462411,1994
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Marvel
Model: 81APC
Year: 1994
Capacity 18" x 25" @ 90 deg. 18" x 15" @ 45 deg. Left 18" x 17" @ 45 deg. right Blade 15' 6" x 1 1/4" Vise 2 ea Hydraulic Work Height 38 inches Blade Speed 60 - 400 FPM Feed Hydraulic: 0 - 300 lbs. Motor 460/3/60, 7.5 H.P. Work Rollers 2 ea RPM variable Machine Size (LxWxH) 8 6 x 4' x 8' Machine Weight ...more
20" x 12" Jet #VBS-2012, Vertical Bandsaw, 65 - 3280 SFPM, 24" x 22-1/2" table, bi-metal blade, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Jet
Model: VBS-2012
Blade Speeds (SFPM) ------------------- 65 - 3,280, Height Capacity (Max.) (In.) ------------ 12, Throat Capacity (In.) -------------------- 20, Table Size (L x W) (In.) ------------------ 24 x 22-1/2, Weight (Lbs.) --------------------------- 1,244, Blade Width (Min.-Max.) (In.) ---------- 1/8 - 1, Motor (HP) ...more
20" x 12" Powermatic #87, vertical bandsaw, 24" x 24" table, 151" blade length
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Powermatic
Model: 87
Throat 20 inches Table size 24" x 24" Maximum blade length 151 inches Minimum blade length 149 inches Table tilt 45 right / 15 left Motor 1.5 HP / 1,725 RPM Motor 208 230 / 460 Phase 3 Cycles 60 Overall Dimensions 40" W x 58"L x 80"H Weight 1250 pounds.
20" x 13-3/8" Delta #20-365, vertical band saw, 141" x 1/2" blade, 2 HP, serial #1303674
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Delta
Model: 20-365
- 20 in THROAT DEPTH, - MAXIMUM BLADE SIZE 1/2 in, - BLADE LENGTH 141 in, - MAXIMUM CUTTING CAPACITY UNDER GUIDE, 13-3/8 in, - MOTOR 2 H.P./3 PHASE SUBJECT TO VERIFICATIONDELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE.
20" x 14" Startrite #V500F, vertical band saw, 24" x 24" table, 1" W x 164" L blade
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Startrite
Model: V500F
THROAT DEPTH ------------------ 20 in, WORK HEIGHT UNDER TOP GUIDE --- 14 in, BLADE WIDTH RANGE ------------- 1/8 in TO 1 in, BLADE LENGTH ------------------ 159 1/2 in TO 164 in, BAND WHEEL SIZE --------------- 20 1/2 in DIA, TABLE TYPE -------------------- FIXED, TABLE SIZE -------------------- 24 in X 24 in, TABLE ...more
20" x 16" DoAll #2013-V, vertical band saw, 1/2" x 154" blade, 26" x 26" work surface, 1983
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Doall
Model: 2013-V
Year: 1983
THROAT ------------------ 20 in, BASE DEPTH -------------- 40 in, OVERALL DEPTH ----------- 50 in, BASE WIDTH -------------- 32 in, OVERALL WIDTH ----------- 42 in, WORK HEIGHT ------------- 16 in, WORK SURFACE ------------ 26 in X 26 in, FLOOR TO WORK SURFACE --- 39 in, TABLE SLOT -------------- 13-1/2 in, BLADE ...more
20" x 16" Wellsaw #V20F, vertical band saw, 3.5" wheel travel, 26" x26" cast iron table, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Wellsaw
Model: V20F
CAPACITY THROAT: 20" DEEP x TABLE TO GUIDE: 16" HIGH TABLE TO GUIDE Standard Width: 3/16" through 3/4", Optional Width: 1/2" through 1", Length: 14-9" Wheel Travel 3.5 inches Band Wheels 21" Cast Aluminum with replaceable rubber tires Blade Guides Six Sealed Roller Bearings w/ 90 Rotation Table Size 26" x 26" Cast ...more
20" x 24" Hemsaw #VT130HA-60, high speed production vertical band saw, 19' x 1.5" blade, 10 HP, 2004
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT130HA-60
Year: 2004
SAW CAPACITY 20" x 24" (90), 20" X 16" (45), 20" X 10" (60) ARM CANT 4 PERMANENT BLADE SIZE 1.5" X 19' BLADE X.050" BLADE DRIVE 10 HP, 220V/440V AC, 3 PHASE, BALL BEARING TFC Blade Speed 75 TO 400 SFPM W/Readout Cutting Pressure 0 To 400 Psu Blade Feed Rate 0 To 3 Ips Power Tilt 60 Left Or Right Feed Stroke 0 To ...more
20" x 25" Hem #V150M, high speed, 1-1/2" x 18' 6" x .050" blade, vises, lube, blade tension, #81075
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hem
Model: V150M
Year: 1990
SAW ----------------------- VERTICAL/HIGH SPEED/HEAVY DUTY PRODUCTION BAND SAW, SAW CAPACITY -------------- 20" HORIZONTAL, 25" VERTICAL @ 90°, 20" HORIZONTAL, 18" VERTICAL @ 45°, BLADE SIZE ---------------- 1 1/2" X 18' 6" X.050" THICK, MAIN MOTOR ---------------- 7.5 HP, APPROX. WEIGHT ------------ 6,000 ...more
JUST ADDED!
20" x 25" Hemsaw #V150A, Vertical Band Saw, Stainless Steel, 1-1/2" x18' 6" blade, 10 HP, 1800 RPM, 400 SFM1994
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V150A
Year: 1994
SAW CAPACITY: 20 in HORIZONTAL, 25 in VERTICAL @ 90 DEGREES, 20 in HORIZONTAL, 18 in VERTICAL @ 45 DEGREES, BLADE SIZE: 1-1/2 in x 18 ft6 in - Shut off switch if blade breaks., BRUSH: Powered brush assembly - brush size, 1/2 in X 4 in, ELECTRICALS: 10 HP Drive motor, 1800 RPM, Ball Bearing TFC, sealed submersible ...more
20" Delta Milwaukee, vertical band saw, tilting table, brake, upgraded blade guides, S/N 1817-A
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Delta
* TILTING TABLE, * BRAKE, * UPGRADED BLADE GUIDES, * FULL BEARMS AND RUBBER.
21" x 21" Kalamazoo #VTH-21A, semi-auto vertical bandsaw, 1-1/4" x .042" x 194" blade, 40-450 FPM, 7.5 HP, hydraulic vise
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Kalamazoo
Model: VTH-21A
* Special Note: this saw was once a fully automatic saw until the PLC failed and we removed the auto feed table making it a semi-automatic., Hydraulic vises L & R, 45 tilt L-R, Hydraulic feed force, Chip removal system.
22" x 18" Hyd-Mech #V-18APC-60, automatic vertical bandsaw, 1-1/4" x 16' 11" blade, 65-385 SFM, PLC Control, work light
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-18APC-60
, Automatic programmable mitering w/go to angle functionality from 60 left to 60 right, 4 full stroking hydraulic vises (feed, main, and outboard) and squaring vise, Automatic multi-indexing up to 40 in a single stroke, Powered movable guide arm, Automatic PLC control programmable up to 1000 jobs w/5 in queue ...more
22" x 18" Hyd-Mech #V-18APC-60-60, automatic vertical bandsaw, 1-1/4" x 16' 11" blade, 65-385 SFM, 7.5 HP, 60" automatic multi-indexing, 8.5" Mitsubishi FX5U PLC controller
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-18APC-60-60
, Automatic programmable mitering w/go to angle functionality from 60 left to 60 right, 8.5 Mitsubishi FX5U PLC color touch screen controller. No flipping from screen to screen, the control is, interactive w/messages for the operator that reduces the learning curve. User friendly graphical icon, programming for miter ...more
22" x 18" Hyd-Mech #VW-18-2, semi-auto vertical bandsaw, 1-1/4" x 16' 3" blade, 65-385 SFM, 5 HP, 480 V., work light
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: VW-18-2
, Adjustable 3 canted head, Double articulating, semi-automatic control, 2 full stroking hydraulic vises, Manual precise head positioning from 60 left to 60 right, Digital angle display w/protractor, Powered hydraulic guide arm, On-demand hydraulics, 5 HP VFD. True direct blade drive no belts/pulleys, Hydraulic ...more
22" x 30" Hemsaw #VT140HA-60-CTS, vertical high speed production bandsaw, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT140HA-60-CTS
Saw Vertical Tilt-Frame, Automatic Production Band Saw Saw Capacity 22" W x 30" H @ 90 Miter 22" W x 20" H @ 45 (L) & (R), 22" W x 13.5" H @ 60 (L), 22" W x 13" H @ 60 (R) Blade Size 1-1/2" x 20'0" x.050 THK Arm Cant 4 non-adjustable Blade Drive 10 HP, 220V (60 amps)/3PH or 440V (30 amps)/3PH Electrical Motor ...more
22" x 30" Hemsaw #VT140HM-60-CTS, Vertical Bandsaw, 10 HP
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: VT140HM-60-CTS
Saw Vertical Tilt-Frame, Automatic Production Band Saw Saw Capacity 22" W x 30" H @ 90 Miter 22" W x 20" H @ 45 (L) & (R), 22" W x 13.5" H @ 60 (L), 22" W x 13" H @ 60 (R) Blade Size 1-1/2" x 20'0" x.050 THK Arm Cant 4 non-adjustable Blade Drive 10 HP, 220V (48 amps)/3PH or 440V (24 amps)/3PH Electrical Motor ...more
23" x 18" Hyd-Mech #V-18-60, semi-auto vertical bandsaw, 1-1/4" x 16' 11" blade, 65-385 SFM, 7.5 HP, 2 hydraulic vises
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-18-60
, 2 full stroking hydraulic vises, Select left or right side control panel, Powered movable guide arm, 7.5 HP VFD. True direct blade drive no belts/pulleys, Hydraulic positive down feed, Cast iron band wheels, Automatic programmable mitering w/go to angle functionality from 45 left to 45 right, Replaceable blade ...more
24" x 10" Grob #NS24, vertical band saw, 1 HP, 1" width blade, S/N 1936
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Grob
Model: NS24
THROAT 24 inches Work Height 10 inches BLADE WIDTH 1 inches Power 1 HP APPROX. DIMENSIONS 53" x 39" x 83" APPROX. WEIGHT 1200 pounds, NOTES:, SUBJECT TO VERIFICATION, DELIVERY:, IMMEDIATE, SUBJECT TO PRIOR SALE.
24" x 12" Grob #4V-24, vertical band saw, 1/8"-1" saw blade, 40-5000 FPM, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Grob
Model: 4V-24
Throat Depth 24 inches Work Height 12 inches Saw Blades 1/8" - 1" Width (Max.) 179 inches Motor 3 HP, 230/460 V Speed (Infinitely Variable) 40 - 5,000 FPM Weight 1670 pounds, Speed Indicator, Balanced Cast Aluminum Pulleys, Ball Bearing Mounted, Oil Resistant Rubber Facing, Heavy Cast Iron Table Tilts – 45° ...more
24" x 31" Hemsaw #V140HA-60-CTS, automatic vertical tilt-frame production bandsaw, 1-1/2" x 20' 0" x .050" blade, NEW
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V140HA-60-CTS
Saw Vertical Tilt-Frame Production Band Saw Saw Capacity 24" W x 31" H @ 90 Miter 24" W x 21" H @ 45 (L) & (R), 24" W x 13.5" H @ 60 (L), 24" W x 13" H @ 60 (R) Blade Size 1-1/2" x 20'0" x.050 THK Blade Drive 10 HP, 220V (48 amps)/3PH or 440V (24 amps)/3PH Electrical Motor Requirement. 220V or 440V AC to be ...more
26" x 21" Hyd-Mech #V-21, automatic vertical bandsaw, 1-1/2" x 19' 4" blade, 10 HP, 65-385 SFM, work light
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-21
, 4 canted head, Go to angle functionality from 60 left to 60 right, Hydraulic head tilt, Cast iron band wheels, Hydraulic DDF system, 2 full stroking hydraulic vises, Hydraulically powered programmable guide arm attached to saw column, Variable vise pressure, 10 color screen HMI. No flipping from screen-to-screen ...more
26" x 21" Hyd-Mech #V-21/26APC, automatic vertical bandsaw, 1-1/2" x 19' 4" blade, 10 HP, 65-385 SFM, work light
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-21/26APC
, 4 canted head, 60 bar feed, left side, Shuttle s automatic multi-indexing up to 60 (120 optional) in a single stroke w/automatic kerf, compensation. Powered by a rack and pinion servo drive, Automatic programmable mitering w/go to angle functionality from 60 left to 60 right, Hydraulic head tilt, Cast iron band ...more
30" x 15" Tannewitz #PH, vertical band saw, 30" wheel diameter, 1.25" x17' blade, 5 HP, 7000 SFPM, 26" x28" table, S/N 13750
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
Model: PH
Year: 1962
Throat Capacity 29.5 inches Work Thickness 15 inches Wheel Diameter 30 inches Horsepower 5 HP Blade Speed 7,000 SFPM Table Size 26" x 28" Auxiliary Table Size 14" x 16" TABLE TILT 45 R / 5 L Table Height 38.5 inches Upper Wheel Adjustment 5 inches Blade Width 1/8" x 1.25" Blade Length 17 feet Blade Guides R418A ...more
30" x 15" Tannewitz #PH, vertical band saw, 30" wheel diameter, 5 HP, 700 SFPM, 1.25" x 17' blade, S/N 16081, 1970
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
Model: PH
Year: 1970
Throat Capacity 29.5 inches Work Thickness 15 inches Wheel Diameter 30 inches Horsepower 5 HP Blade Speed 7,000 SFPM Table Size 26" x 28" Auxiliary Table Size 14" x 16" TABLE TILT 45 R / 5 L Table Height 38.5 inches Upper Wheel Adjustment 5 inches Blade Width 1/8" x 1.25" Blade Length 17 feet Blade Guides R418A ...more
30" x 15" Tannewitz #PH, vertical band saw, 5 HP, 7000 SFPM, 26" x28" table, S/N 84065, 1985
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
Model: PH
Year: 1985
Throat Capacity 29.5 inches Work Thickness 15 inches Wheel Diameter 30 inches Horsepower 5 HP Blade Speed 7,000 SFPM Table Size 26" x 28" Auxiliary Table Size 14" x 16" TABLE TILT 45 R / 5 L Table Height 38.5 inches Upper Wheel Adjustment 5 inches Blade Width 1/8" x 1.25" Blade Length 17 feet Blade Guides R418A ...more
30" x 25" Hyd-Mech #V-25, automatic vertical bandsaw, 1-1/2" x 21-1/2" blade, 10 HP, 480 V., 75-350 SFM, 2 hydraulic vise
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-25
, 6 canted head, Control provides hydraulic powered mitering from 60 left to 60 right, Digital angle display, 2 full stroking hydraulic vises, Powered movable guide arm, 10 HP VFD. True direct blade drive no belts/pulleys, Cast iron band wheels, Replaceable blade brush, Easy access electrical panel and hydraulics ...more
30" x 25" Hyd-Mech #V-25APC, automatic vertical bandsaw, 1-1/2" x 21-1/2" blade, 10 HP, 75-350 SFM, 60" automatic multi-indexing, PLC
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-25APC
, 6 canted head, 60 bar feed, left side, Shuttle s automatic multi-indexing up to 60 (120 optional) in a single stroke w/automatic kerf, compensation. Powered by a rack and pinion servo drive., Automatic programmable mitering w/go to angle functionality from 60 left to 60 right, Hydraulic head tilt, Cast iron band ...more
31" x 18" Hyd-Mech #V-18-45, semi-auto vertical bandsaw, 1-1/4" x 16' 11" blade, 65-385 SFM, 7.5 HP, 2 hydraulic vises
Greenway & Associates Ltd | Orange City, IA
Category: Vertical Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: V-18-45
, 2 full stroking hydraulic vises, Select left or right side control panel, Powered movable guide arm, 7.5 HP VFD. True direct blade drive no belts/pulleys, Hydraulic positive down feed, Cast iron band wheels, Automatic programmable mitering w/go to angle functionality from 45 left to 45 right, Replaceable blade ...more
35.5" x 13" DoAll #3613-0, vertical bandsaw, 1" x 175" blade, 50-5200 FPM, blade welder, S/N 278-75628
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Doall
Model: 3613-0
Throat Band to Column 35.5 inches Maximum Work Height 13 inches Band Width Capacity 1/16" - 1" Saw Band Length 175 inches Variable Band Speed 50-300 / 850-5200 FPM Table Tilt 45 R / 10 L Table Dimensions 26 x 26 Table Height 43 inches Wheels 3 - 16.125" Upper Wheel Adjustment 3 inches Approx. Shipping Dimensions 40 L ...more
36" x 12" Grob #NS36, Vertical Bandsaw, 50-2030 FPM, 118" blade, tilting table, S/N 982
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Grob
Model: NS36
THROAT 36 inches BASE DEPTH 56 inches OVERALL DEPTH 82 inches BASE WIDTH 26 inches OVERALL WIDTH 48 inches WORK HEIGHT 12 inches WORK SURFACE 42" X 48" WORK SURFACE SLOT 13 inches FLOOR TO WORK SURFACE 42 inches OVERALL HEIGHT 77 inches BLADE WHEEL ENCLOSURE 12 inches BLADE WHEEL DIAMETER 18.125 inches SPEEDS 50 - ...more
40" Kysor Johnson #KVH-40, vertical bandsaw, hydraulic power tilt table, blade welder, blade grinder
N S Machine Corp. | Granger, IA
Category: Vertical Band Saws
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Kysor Johnson
Model: KVH-40
, Manufacturer: Kysor-Johnson, Model Number: KVH-40, Size / Capacity: 40″, Stock Number: 13689, s:, Hydraulic Power Table Feed, Tilting Table, Blade Welder, Blade Grinder, Blade Tension Indicator, Circle sawing device, Air Blowoff, Work Light, Throat depth - 40", Table dimensions - 26" x 26", Blade speed - ...more
DoAll #3613-20, vertical band saw, 36" throat, cnc, 480 V., tilt table, 26" x33" table, blade welder, 1981
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Doall
Model: 3613-20
Year: 1981
Throat 36 inches Work Height 42 inches CNC Control yes Dimensions 90" X 56" X 80" Main Motor 480V, 1 PH TABLE SIZE 26" X 33" BLADE LENGTH 125-175, * BLADE WELDER, * TILT TABLE, NOTES:, SUBJECT TO VERIFICATION, DELIVERY:, IMMEDIATE, SUBJECT TO PRIOR SALE.
Hemsaw #V100-HA-HC-CTS, vertical automatic bandsaw
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V100-HA-HC-CTS
Saw: Vertical, Automatic Production Band Saw, Saw Capacity: 18" Horizontal, 31" Vertical @ 90, Miter: 18" Horizontal, 18" Vertical @ 45 (Both Directions), Blade Size: 1-1/4" x 16'6" x.042” THK, Blade Drive: Hydraulic motor is used to power the band., Blade Speed: Variable blade speed of 100-320 SFPM. Blade ...more
Tannewitz, Vertical Bandsaw
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Tannewitz
