1 - 50 of 4978 listings
Featured
1500 GPM @ 6315' TDH, Sulzer Bingham #6x8x13.5-MSD, horz. centrifugal pump, BB3, 9-Stage, 13.5" imp., 8" suction, 6" discharge, 3175 HP, 3580 RPM, Never Used
Power Zone Equipment | Center, CO
Category: Centrifugal Pumps
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Sulzer Bingham
Model: 6X8X13.5-MSD
Brand/Model: Sulzer Bingham 6x8x13.5 MSD : Unused Surplus Sulzer 6x8x13.5 MSD, API 610, BB3 pump with the following s: • D-1 case material (duplex stainless steel) • 9 stage (first stage single suction) • 13.5” duplex stainless impellers (first stage single suction) • ...more
Featured
2100 GPM @ 40' TDH, Gorman Rupp (Gorman-Rump) #V12B-13A-D5, Vertical Pumps (5 available)
Stanco Industries, Inc | Fort Wayne, IN
Category: Centrifugal Pumps
Seller: Stanco Industries, Inc
Location: Fort Wayne, IN
Mfr: Gorman Rupp
Model: V12B 13A D5
Year: 2023
StanCo is offering a total of five (5) 2100GPM Gorman-Rupp Vertical Pumps, installed new in 2023 at Home Shopping Network (HSN) Jacksonville, Florida. Presently located in Fort Wayne, IN where they can be inspected, by appointment. Additional photos/info on request. Please call Mike Stanley 260-413-6874.
Featured
4605 GPM @ 2556' TDH, Sulzer Bingham 10x10x13.5 MSD, horizontal multi-stage centrifugal pump
Power Zone Equipment | Center, CO
Category: Centrifugal Pumps
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Sulzer
Brand/Model: Sulzer Bingham 10x10x13.5D MSD : Used Low Hour Sulzer Bingham 10x10x13.5 MSD, 4 stages, API 610, BB3 pump, with the following s: • Steel case material • 4 Stages • 10" ASME 900# RF suction • 10" ASME 900# RF discharge • Rotation: CCW • Weight: 7,220 lbs. • ...more
Featured
Grundfos #29N6-40121-14XX0Xx-25R1P, pump, 100 HP, 3560 RPM, 460 V.
HGR24 | Euclid, OH
Category: Centrifugal Pumps
Seller: HGR24
Location: Euclid, OH
Model: 29N6-40121-14XX0XX-25R1P
3560 RPM, MADE IN THE USA, (1990#)68X39X32, (6#)11X11X8, *CONTAINS 2 PIECES.
0 GPM @ 43' TDH, Itt Bell &Gossett #60, centrifugal pump
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Itt Bell&gossett
Model: 60
Bell & Gossett 60 Pump. Marathon Electric motor, - hp, 1,725 - 1,425 rpm, 208-230/460 - 190/380 V, 2.9-3/1.5 - 2.8/1.4 FLA, 60 - 50 Hz. Pump capacity: 0.5 gpm at 43 ft. head. Flange: 4-3/4 in. diameter with (2) holes, center to center: 3-1/2 in. Inlet: (2) 2 in. Overall dimensions: 23 in. L x 15 in. W x 10 in. H.
1 GPM @ 45' TDH, Ingersoll-Rand, 1" MCS, 1750 RPM, #CUP-440
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Ingersoll-Rand
2 GPM @ 1000' TDH, Goulds #3700, 4x6x13,1 stage, 1800 RPM, carbon steel, API, #4360
PumpWorks | Houston, TX
Category: Centrifugal Pumps
Seller: PumpWorks
Location: Houston, TX
Mfr: Goulds
Model: 3700
2 GPM, Hayward Gordon Limited, Centrifugal Pump, 0.75 HP, 1700 RPM, 7/8" inlet/outlet
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Hayward Gordon
Bredel Pump. Model: SP15N. Flow rate for new pump is 2-1/3 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Sew Motor: Hp, 1700 rpm, 230/460 V, 2.90/1.45 A, 60 Hz, 3 Phase. Sew Eurodrive: 23.37:1 ratio. Inlet: (2) ...more
3 GPM @ 30' TDH,Teikoku Pump #F61-215C4DM-0405SS1-AV, 304L Stainless Steel, unused
Aaron Equipment Co | Schaumburg, IL
Category: Centrifugal Pumps
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Teikoku
Model: F61-215C4DM-0405SS1-AV
unused- teikoku pump, model f61-215c4dm-0405ss1-av, 304l stainless steel. approximate 3.5 gallons per minute. 30 foot head. driven by a 1.7 kw motor. for use in nitric acid.
Get email updates for newly added Centrifugal Pumps
Centrifugal Pumps (also known as radial flow pumps) are machines that use a rotating impeller to move liquids by converting rotational energy into kinetic energy. Commonly used in industries like water treatment, manufacturing, and chemical processing, they are ideal for applications such as transporting water, chemicals, and other fluids. Centrifugal pumps are essential for efficient, high-volume fluid transfer in various industrial and commercial processes.
3 GPM, Nikkiso #1M3LE, Single Stage Centrifugal Metering Pump, 2006
IronHub | Calgary, AB
Category: Centrifugal Pumps
Seller: IronHub
Location: Lloydminster, AB
Model: 1M3LE
Year: 2006
Available for sale: A 2006 NIKKISO metering pump (Model 1M3LE) with a capacity of 13.5 L/min. This centrifugal pump is currently operational but disconnected and located in Lloydminster, AB, Canada. Ideal for those seeking a reliable pumping solution without a driver..
5 GPM @ 8' TDH, Sundstrand #H22B-A3CH-01A1, Can Pump w/Motor, 2" x 1", 3600 RPM, Used
Universal Industrial Assets | Gonzales, LA
Category: Centrifugal Pumps
Seller: Universal Industrial Assets
Location: Gonzales, LA
Mfr: Sundstrand
Model: H22B-A3CHF01A1
For sale is one (1) used Sundstrand Can Pump With Motor., Sundstrand, Can Pump/Motor Combination, Model H22B-A3CH-01A1, Size 2" X 1", GPM 5.3, Head 8 Ft., RPM 3600, Case Carbon Steel.
5 GPM @ 75' TDH, Itt Bell &Gossett, centrifugal pump, 0.5 HP
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Itt Bell&gossett
Bell & Gossett Pump. S/N: 890076. Megatek motor, hp, 1,725 rpm, 208-230/460 V, 60 Hz, 3 phase. Pump capacity: 5.5 gpm at 75 ft. head. Inlet: (2) 2 in, flange diameter: 4-1/2 in. with (2) hole center to center 3-1/2 in. Overall dimensions: 23 in. L x 13 in. W x 11 in. H.
5 GPM, Itt Bell & Gossett Bell & Gossett #1X1-1/2X80T, Centrifugal Pump, 1 HP, 1745 RPM, 50' Head, 1.5" inlet, 1" outlet
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Itt Bell & Gossett
Model: 1X1-1/2X80T
Bell & Gossett Pump. Model: 1X1-1/2X80T. S/N: 1506649-C98. Unimount 125 motor, 1 hp, 1745 rpm, 230/460 V, 3.6-1.8 FL, 3.7/1.85 SF, 60 Hz, 3 phase. Pump capacity: 5 gpm at 50 ft. head. Maximum rpm: 1800. Inlets: 1-1/2 in. Outlets: 1 in. Overall dimensions: 17-1/2 in. L x 9-1/2 in. W x 15 in. H.
9 GPM @ 60' TDH, Crane Chempump #GAT-1K-3T, Seal-less Pump, 4-1/8" diameter Impeller, 3450 RPM, 460 V
Universal Industrial Assets | Gonzales, LA
Category: Centrifugal Pumps
Seller: Universal Industrial Assets
Location: Gonzales, LA
Mfr: Crane
Model: GAT-1K-3T
For sale is one (1) new unused Crane Chempump Seal-less Pump., Model: GAT-1K-3T., 460 Volts., 2.3 Fl amps., 3450 rpm., Ins cl: R HP. FL, KW: 1.5., 60 Hz., 3 Phase., Phase seq: 1-2-3., TDH FT: 60.5., 9 GPM., Impeller Diameter: 4 1/8"., Fluid: Diphenylamine..
9 GPM @ 254' TDH, Lecourtney, 1.5" HR7, 3480 RPM, #CUP-565
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Lecourtney
10 GPM @ 31' TDH, Goulds #3796ST, 1.5" x 1.5" x 8", No drive, 316 S/S10
EcReCon Inc. | Pedericktown, NJ
Category: Centrifugal Pumps
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Goulds
Model: 3796ST
, GOULDS, model 3796ST, 1.5x1.5x8. Has Durametallic Seal 57642 MSD 1012. No drive., GOULDS 3796ST, GPM. 10, Type. Centrifugal, Horz/Vert. H, Size. 1.5X1.5-8, Material. 316SS, Ft/Hd. 31.00.
10 GPM @ 43' TDH, Kontro #HCOH, 1" x 1" x 4" centrifugal pump, 316 Stainless Steel, 3 HP, #24191 (2 available)
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Kontro
Model: HCOH
Used Kontro Centrifugal Pump, Model HCOH, 1" X 1" X 4", 316 stainless steel construction, rated 10 GPM @ 43' Head @ 300 PSI, on base with 3 HP 230/460 Volt XP motor, Serial No. 12288P-38.
10 GPM @ 49' TDH, Itt Bell &Gossett #60, centrifugal pump, 0.75 HP
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Itt Bell&gossett
Model: 60
Bell & Gossett 60 Pump. S/N: 890082. Marathon motor, hp, 1725 rpm, 208-230/460 V, 2.9-3/1.5 FLA, 60 Hz, 3 phase. Pump capacity: 10 gpm at 49.5 ft. head. Flange: 4-3/4 in. with (2) holes, center to center: 3-1/2 in. Inlets/outlets: (2) 1-1/2 in. Overall dimensions: 29 in. L x 10 in. W x 15 in. H.
10 GPM @ 49' TDH, Labour #AA LV, 1.5" x 1" pump, 2 HP, 230/460 V., 145T frame motor, Hastelloy C
EcReCon Inc. | Pedericktown, NJ
Category: Centrifugal Pumps
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Labour
Model: AA LV
, Labour model AALV pump. Driven by 2 HP, 230/460 V, 145T frame motor., LABOUR AA LV, GPM. 10, Type. Centrifugal, Horz/Vert. H, Size. 1.5X1, Material. HASTELLOY C, Ft/Hd. 49.00.
10 GPM @ 50' TDH, Durco, centrifugal pump, 1.5" x 1" x 6", D4 alloy, 3 HP, #24368
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Durco
Model: 24368
Used Durco Centrifugal Pump, D4 alloy construction, 1.5" X 1" X 6" impeller, rated 10 GPM @ 50' Head @ 275 PSI @ 100 degrees F, on base with 3 HP 230/460 Volt XP motor, Serial No. 68815.
10 GPM @ 50' TDH, Durco, Centrifugal Pump, D4 Alloy, 1.5" x 1" x 6" Impeller, 275 psi @ 100° F, 3 HP, 230/460 V
Perry Videx LLC | Hainesport, NJ
Category: Centrifugal Pumps
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Durco
Used Durco centrifugal pump. D4 Alloy construction. 1.5" X 1" X 6" impeller. Rated 10 gpm @ 50' head @ 275 psi @ 100F. On base with 3 HP, 230/460 volt XP motor., DURCO 1.5" X 1" X 6".
10 GPM @ 80' TDH, Goulds #3196, Centrifugal Pump, Stainless Steel, with mechanical seal, 360 RPM, 15 HP, Serial #715C718
Ingalls Process Equipment | Painesville, OH
Category: Centrifugal Pumps
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Goulds
Model: 3196
One (1) used Goulds Centrifugal Pump 316 stainless steel contact parts Model 3196 Size: 1 x 1.5 - 6 GPM: 10 Serial number: 715C718 RPM: 3600 Impeller Diameter: 4.12" Rated: 80 feet of head On base with motor 15 HP motor, 3 phase, 3480 RPM, 208-230/460 voltage Motor is a US Motors Unimount 125.
10 GPM @ 85' TDH, Ingersoll-Rand, 1" CRVN, 3450 RPM, #CUP-559
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Ingersoll-Rand
10 GPM @ 156' TDH, United, 1.5x7 VP, 3560 RPM
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: United
10 GPM CP Pump Systems #MKP-20-15-200, Centrifugal Pump Head, Stainless Steel, 2021
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Cp Pump Systems
Model: MKP 20-15-200
Year: 2021
Used CP Pump Systems pump head, model MKP 20-15-200, stainless steel construction, 2.3 cubic meters/hr, serial# 21-017681/06560, built 2021.
10 GPM CP Pump Systems #MKP-20-15-200, Centrifugal Pump Head, Stainless Steel, 2024
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Cp Pump Systems
Model: MKP 20-15-200
Year: 2024
Unused CP Pump Systems pump head, model MKP 20-15-200, stainless steel construction, 10.1 gpm serial# 24S0003461-001, built 2024.
10 GPM, Durco, Centrifugal Pump, D20 Alloy, 1.5" x 1", 2 HP, 230/460 V, 1750 RPM
Perry Videx LLC | Hainesport, NJ
Category: Centrifugal Pumps
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Durco
Used Durco centrifugal pump. 10 gpm. D20 Alloy (high chrome/nickel content). 1.5" X approximately 1". Base mounted direct coupled to 2 HP, 230/460 volt, 1750 rpm TEFC motors. Mechanical seal., DURCO _UNKNOWN_.
10 GPM, Itt Bell & Gossett Bell & Gossett #1-1/4AA41, Centrifugal Pump, 0.25 HP, 1725 RPM, 15' Head, 1.25" inlet/outlet
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Itt Bell & Gossett
Model: 1-1/4AA41
Bell & Gossett Pump. Model: 1-1/4AA41. S/N: 921066/BF. Leeson motor, hp, 1725 rpm, 115-208/230 V, 4.8-2.4 amps, 60 Hz. Pump capacity: 10 gpm at 15 ft. head. Max. rpm: 1750. Flange: 4-1/2 in. with (2) holes each in., center to center 3 in. Inlet: (2) 1-1/4 in. Overall dimensions: 17-1/2 in. Lx 13-1/2 in. W x 12 in. ...more
10 GPM, Viking #H432, centrifugal pump, 1 HP
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Viking
Model: H432
Viking Internal Gear Pump. Model: H432. S/N:2040204. Flow rate for new pump is 10 gpm with required horsepower and rpms. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Maximum pump speed is 1200 rpm. Maximum flow rate is 10 gpm at 1200 rpm. Maximum ...more
11 GPM @ 593' TDH, Grundfos #CRN2, vertical multistage centrifugal pump
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Grundfos
Model: CRN2
Grundfos Pump. Model: A40176078E P1 9924. Type: CRN2-190U G-G-AUUE. Pump capacity: 11 gpm @ 593 ft. MAWP: 300 psi max @ 250 F. Inlets/outlets: (2) 1-1/2 in. dia. flanged ports. Overall dimensions: 10 in. L x 6 in. W x 1 ft. 10 in. H.
11 GPM @ 670' TDH, Peerless, 2x4x13 PRA, 3500 RPM, #CUP-484
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Peerless
12 GPM, Price #LT25AB-312-21291-3336-3T7, Centrifugal Pump, 0.3 HP, 2850 RPM, 220/440 V, 325 psi, 3.34" diameter impeller
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Price
Model: LT25AB-312-21291-3336-3T7
Price model LT25(AB) Pump. Model: LT25AB-312-21291-3336-3T7, Serial No: 73091. Volute and Impeller Material: Bronze. Standard - Discharge(in):.25 FNPT, Suction(in): 0.5 FNPT. Maximum Impeller Diameter(in): 3.34. Stub Shaft: 316 SS. Max GPM: 12, Max Head(ft): 48, Min. Flow: 0.5 GPM, Max Temp(F): 300. Price Pump Motor - ...more
13 GPM @149.6' TDH, Grundfos #CRT2-5, Vertical Multistage Centrifugal Pump End, 3450 RPM pump, 363 psi, 5 stages
Lenmark Industries | Langley, BC
Category: Centrifugal Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Grundfos
Model: CRT2-5
SKU: 102411, Model: CRT2-5, Condition: Surplus New, Made In: DENMARK, Dimensions: 12.00 (H) x 12.00 (W) x 24.00 (L) inches, Additional :, Type: CRT2-5 A-P-A-E-AUUE, Item No.: A96100967P11245, Motor Frame: 56C, Pump Speed: 3450RPM, Max. Operating Pressure: 363PSI, Rated Flow: 13.2GPM, Rated Head: 149.6ft., Head Max.: ...more
14 GPM @ 51' TDH, Goulds #3196, Centrifugal Pump, Size 1" x 1-1/2" x 8", 1.5 HP, 1730 RPM, 6.62" Impeller
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Goulds
Model: 3196
Goulds Centrifugal Pump. Model 3196. S/N 788B861. Size 1 in. x 1-1/2 in. x 8 in. Impeller dia: 6.62 in. Material Construction: Alloy 20. Capacity: 14 gpm @ 51 hd.ft. Double mechanical seals with flushing. Motor : 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase. Overall dimensions: 35 in. L x 12 in. W x 15 ...more
14 GPM @ 100' TDH, Durco (Self Prime), 1 1/2 X 2 CI, 3560 RPM, 2856
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Durco
Model: 1 1/2 X 2 CI
14 GPM @ 100' TDH, Durco (Self Prime), 1 1/2 X 2 Stainless Steel, 3560 RPM, 2855
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Durco
Model: 1 1/2 X2 SS
14 GPM @ 321' TDH, Labour, 1x2x10, 3560 RPM, #2025
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Labour
15 GPM @ 0' TDH, Durco, 2x1.5V-6/50 (ANSI), 3550 RPM, #CUP-154
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Durco
15 GPM @ 98' TDH, NGK #NEV113, Carbon Steel, 1" x 1" in/outlets, on cart, 5 HP, 3460 RPM, 230/460 V.motir, 1985, #45859, 1985
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ngk
Model: NEV113
Year: 1985
Used NGK centrifugal pump, model NEV113, carbonn steel construction, 1" x 1" inlet/outlets, rated 15.8 gpm at 98' head pressure, on cart with 5 hp, 3460 rpm, 230/460 volt motor, serial# 82230B, 1985.
15 GPM @ 109' TDH, Ingersoll-Rand, 1x7W, 3550 RPM, #CUP-358
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Ingersoll-Rand
15 GPM @ 455' TDH, Grundfos #CR3-19, Vertical Multistage Centrifugal Pump, cast iron, 5 HP, 3461 RPM, 363 psi, 230/460 Volts, 3PH
Lenmark Industries | Langley, BC
Category: Centrifugal Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Grundfos
Model: CR3-19 K-FGJ-A-E-HQQE
SKU: 106775, Model: CR3-19 K-FGJ-A-E-HQQE, Condition: Used, Horsepower: 5 hp, GPM: 15.4, Pump Material: Cast Iron, PSI: 363, Head: 455 ft, RPM: 3461 rpm, Electrical :, Voltage: 230/460 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 40.00 (H) x 10.00 (W) x 10.00 (L) inches, Additional :, Series: CR, Model: ...more
15 GPM, Goulds, 304 Stainless Steel vertical centrifugal pump, 1/2 HP, 1" in/out, 230 psi
Machinery & Equipment Co | Brisbane, CA
Category: Centrifugal Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Goulds
Goulds 304 stainless steel vertical centrifugal pump, G&L series SSV multistage design. Handles 15 GPM at up to 230 PSI. Includes 1" NPT inlet and outlet, powered by a 1/2 HP motor., HP: 0.5, Basis: FOB, Contact Parts: 304 Stainless Steel, Inlet and Outlet: 1" Inlet x 1" Outlet.
16 GPM @ 190' TDH, Byron-Jackson, 1 x 1 1/2 x 7 1/4L SJA, 3560 RPM, #1522
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Byron-Jackson
16 GPM @ 291' TDH, Grundfos #CR3-13-U-FGJ-A-U-HOOV, Stainless Steel, 195°F max.temp, 3 HP, 230/460 V, #47558 (4 available)
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Grundfos
Model: CR313UFGJ-A-U-H
Used Grundfos pump, type CR3-13-U-FGJ-A-U-HOOV, nominally rated 16 gpm at 291' head pressure at 195 f max temp, driven by 3 hp, 230/460 volt motor, serial# 96083348P20319US15.
16 GPM @ 291' TDH, Grundfos #CR3-13-U-FGJ-A-U-HOOV, Stainless Steel, 195°F max.temp, 3 HP, 230/460 V, #47560
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Grundfos
Model: CR313UFGJ-A-U-H
Used Grundfos pump, type CR3-13-U-FGJ-A-U-HOOV, nominally rated 16 gpm at 291' head pressure at 195 f max temp, driven by 3 hp, 230/460 volt motor, serial# 96083348P20319US16.
16 GPM @ 291' TDH, Grundfos #CR3-13-U-FGJ-A-U-HOOV, Stainless Steel, 195°F max.temp, 3 HP, 230/460 V, #47561
Federal Equipment Company | Cleveland, OH
Category: Centrifugal Pumps
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Grundfos
Model: CR313UFGJ-A-U-H
Used Grundfos pump, type CR3-13-U-FGJ-A-U-HOOV, nominally rated 16 gpm at 291' head pressure at 195 f max temp, driven by 3 hp, 230/460 volt motor, serial# 96083348P20319US13.
16 GPM @ 321' TDH, Labour, 1x2x10, 3560 RPM, 2023
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Labour
Model: 1X2X10
Year: 2023
16 GPM @ 321' TDH, Labour, 1x2x10, 3560 RPM, #2024
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Labour
17 GPM @ 912' TDH, Afton, 2x3-18 HPV, 5 STG (S/N A68-20), 3550 RPM, 3008
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Afton
18 GPM, Osaka Sanitary Metal Works #SE-32-15, Centrifugal Pump, 2 HP, 2860/3460 RPM, 200/220 V, 4.375" diameter Impeller
Genemco | Hearne, TX
Category: Centrifugal Pumps
Seller: Genemco
Location: Hearne, TX
Mfr: Osaka Sanitary Metal Works
Model: SE 32-15
Osaka Sanitary Metal Works Sanitary Centrifugal Pump. Model: SE 32-15. Flow rate for new pump is 18 gpm with required horsepower and pressure. Toshiba motor: 1.5 kw (~2hp), 2860/3460 rpm, 200/220 V, 6.1/5.5 A, 50/60 Hz, 3-phase. (1) 4-3/8 in. dia. impeller. Inlet: (2) 1-1/2 in. ACME. Overall dimensions: 1 ft. 7-3/8 ...more
18 GPM, Peerless #DL, Carbon Steel centrifugal pump, 7.5 HP, 1.5" inlet, 2" outlet
Machinery & Equipment Co | Brisbane, CA
Category: Centrifugal Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Peerless
Model: DL
Peerless centrifugal pump, DL Type, carbon steel with 2" inlet and 1-1/2" outlet. Driven by 7.5 HP motor operating at 3600 RPM. Rated for 18 GPM., HP: 7.5, Basis: FOB, Contact Parts: Carbon Steel, Inlet and Outlet: 2" Outlet X 1.50" Inlet.
20 GPM @ 30' TDH, Paco Pumps #11-10705-133201, Centrifugal Pump, 50 HP, 1720 RPM, 600 V, 5.875" impeller diameter
Lenmark Industries | Langley, BC
Category: Centrifugal Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Paco Pumps
Model: 11-10705-133201
SKU: 106988, Model: 11-10705-133201, Condition: Used, S/N: C9747, Horsepower: 50 hp, GPM: 20, Head: 30 ft, RPM: 1720 rpm, Electrical :, Voltage: 600 volts, Phase: 3-phase, Dimensions: 15.00 (H) x 12.00 (W) x 36.00 (L) inches, Additional :, Impeller Diameter: 5.875".
20 GPM @ 42' TDH, Union Pump #PO-6, Single Stage Centrifugal Injection Pump Package, 3 HP, 3505 RPM, 275 psi, 230 V.
IronHub | Calgary, AB
Category: Centrifugal Pumps
Seller: IronHub
Location: whitecourt, AB
Mfr: Union
Model: PO-6
This unit s a skid welded to piles, designed for transferring lean amine to a gas plant. It includes a robust electric driver with a maximum horsepower of 3 and operates at 230 volts on a three-phase system. The pump is rated for up to 275 psi and delivers an impressive capacity of 20 m3/d, making it suitable for sour ...more
20 GPM @ 61' TDH, Bingham, 1 1/2x2x8H CAD, 1760 RPM, 453
Power Machinery LLC | Houston, TX
Category: Centrifugal Pumps
Seller: Power Machinery LLC
Location: Houston, TX
Mfr: Bingham
Model: 1 1/2X2X8H CAD
