For Sale by DTS
Surplus Record Dealer Since 2024
Todd Owenby
864-54...> Show Seller's Phone Number 864-546-1183 Let the seller know you found their listing on Surplus Record!
Description
2018 Sahinler HPK 180DP
very nice like new Machine has about 110 bends on it. used to make canopy system
comes with ST & ST** rollers
very nice like new Machine has about 110 bends on it. used to make canopy system
comes with ST & ST** rollers
- All Three Rolls are Powered by Hydro-Motors and Planetary Gearboxes
- Rolls are Hardened
- Roll Shafts are Special Steel, Hardened and Ground
- Standard Rolls Handle Many Shapes
- 3-Axis Hydraulic Leg-In Guide Rolls
- Two Rolling Speeds
- Two Electronic Digital Readouts (LED)
- Horizontal Working Position
- Mobile Control Console with Push Button Controls and Digital Readouts
| Rolls Used | Shape | Capacity |
|---|---|---|
| ST |  Angle Iron,Leg Out | 7" x 7" x 3/4" ∅99" |
| ST* |  Angle Iron,Leg In | 7" x 7" x 5/8" ∅158" |
| ST |  Flat Bar,Easy Way | 11" x 2-3/8" ∅79" |
| ST |  Flat Bar,Hard Way | 7" x 1-3/16" ∅99" |
| ST |  SquareBar | 4-5/16" ∅79" |
| ST |  T-Iron,Leg Out | 6" x 3/4" ∅99" |
| ST |  T-Iron,Leg In | 6" x 3/4" ∅119" |
| ST** |  Channel,Leg Out | 14" ∅99" |
| ST** |  Channel,Leg In | 14" ∅119" |
| SP |  RoundBar | 4-5/16" ∅79" |
| SP |  TubeRound | 8-5/8" x 5/32" ∅315" |
| ST** |  TubeSquare | 6" x 5/16" ∅178" |
| ST** |  TubeRectangular | 8" x 4" x 5/16" ∅197" |
| ST |  Pipe | 8" Sch. 40 ∅158" |
Inquire Further with DTS!
Buyers Who Viewed This Listing Also Viewed …
Roto-Die #15, hydraulic bender, 14 gauge x 10', 3" stroke, 20-50 SPM
Category: Tube and Pipe Benders
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Roto-Die
Model: 15
14 GAUGE X 10" ROTO-DIE #15 HYDRAULIC BENDER, Serial No. 80534, Bending Length 120", Capacity 14 Ga., Capacity with 7/8" Opening 14 Ga. x 120", Capacity with 3/8" Opening 18 Ga. x 120", Stroke 3", Speeds 20 to 50 SPM, Die Clearance 2-1/8", Approximate Dimensions 151" x 22" x 72" H, Approximate Weight 8,950 Lbs..
Southern Machine double end tube bender, 7.5 HP, hydraulic tank, electrical panel, push button control (2 available)
Category: Tube and Pipe Benders
Seller: G-2000
Location: Toledo, OH
Mfr: Southern Machine
, Hydraulic Tank, Electrical Panel, Push Button Control Panel, Motor: Hydraulic Unit: 7.5 HP, 230 / 460 / 3 / 60, OVERALL DIMENSIONS: 5′ x 4′ x 6′, APPROXIMATE WEIGHT: 2,200 Lbs., Machine Type.Benders, Pipe, Tube & Bar Manufacturer.N/A Model.N/A Year.N/A Condition.Good.
Pines #176, muffler & pipe bender, bending & swaging, 1968, tag #15077
Category: Tube and Pipe Benders
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Pines
Model: 176
Year: 1968
Teledyne Pines #M-94604-Dial-A-Bend, vertical hydraulic tube bender, 460 V., 3-phase
Category: Tube and Pipe Benders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Teledyne Pines
Model: M-94604-DIAL-A-BEND
(1) Used 1 1/2 Teledyne Pines Vertical Hydraulic Tube Bender, Serial# 44361-89098, Capacity: 1 1/2 OD Capacity x.065 wall thickness, Digital Dial a Bend Control, Bending Angle Max: 140, 2000 PSI Operating Pressure, 1500 Bends per hour, Max Centerling Radius: 4.5 - 90 or less, Min Centerline Radius: 2 to 3 times tube ...more
Pines #5T, vertical hydraulic tube bender, pedestal mounted controls, Bijur lube system, 1986
Category: Tube and Pipe Benders
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pines
Model: -5T
Year: 1986
Pines 5T Vertical Hydraulic Tube Bender, SERIAL. 44362-86105, MODEL. 5T
NEW IN. 1986
, CAPACITY TUBING:
NON FERROUS (2) 1" X.072"
MILD STEEL (2) 1" X.065"
STAINLESS (2) 1" X.049"
SQUARE BAR (2) 1/2"
ROUND BAR (2) 5/8"
BENDS PER HOUR 2000 MAXIMUM
MAXIMUM BENDING ...more
