For Sale by RT Machine
Surplus Record Dealer Since 2025
Sales
570-58...> Show Seller's Phone Number 570-584-2002 Let the seller know you found their listing on Surplus Record!
Description
- Timesavers Model 2321-24-06 Two Head 43" Segmented Widebelt/Polisher
- Specifications:
- Abrasive belt size: 43 x 75"
- Main motor first head: 25HP
- Main motor second head: 20HP
- Maximum width stock: 42"
- Minimum part size: 6 x 6 with vacuum bed
- Maximum thickness opening: 5"
- Infeed loading area: 14"
- Feed speed: 15-45FPM
- Approximate full load amps at 460 volt: 94
- Passline height: 33-38"
- Dust extraction: 3500 CFM (5" Static Pressure)
- Compressed air usage: 6 CFM @ 90psi
- Additional compressed air usage for belt blow-off: 41 CFM@ 90 psi
- Standard Features:
- 8"Diameter Contact Drum (First Head)
- Dual Action Segmented Sanding Heads
- A.C. Variable Frequency Main Drive Motor: (2nd head)
- Abrasive Belt Blow-Off On Second Head
- Dual Infeed and Dual Outfeed Holddown Rolls
- PLC Controller with HMI Interface
- Panel Cleaning Brush
- Air Operated Disc Brakes
- Part Set-up Device
- Infeed Stop Bar
- Hour Meter
- Centralized Control Panel
- Main Motor Percentage Load Meter
- Through-Beam Abrasive Belt Tracking
- Dial Indicators on Adjustable Heads
- Motorized Thickness Adjustment
- Quick Release Outboard Support
- Vacuum Conveyor Bed
- U.L. Listed Components
- Variable Speed Conveyor Drive
Get Your Price from RT Machine!
Buyers Who Viewed This Listing Also Viewed …
43" x 73" Kundig #Optiq-2-43, dual head wide belt sander, 6.25" diameter, 9-45 FPM, emergency stop button, 2004
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Model: OPTIQ-2-43
Year: 2004
KUNDIG OPTIQ 2-43 DUAL HEAD WIDE BELT SANDER2-Head, 43" width cap. - 1st Head: steel contact roll, 6-1/4" Dia., 25 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide finishing platen, 15 HP motor. -- Abrasive belt size 43" x 75", with air tensioning & ...more
43" Timesavers #1311-14-1, Widebelt, Single Head, 5" thick, 15-45 FPM, 33-38" passline, 1000 CFM, unused
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 1311-14-1
Timesavers Model 1311-14-1 Single Head 43" Widebelt : Belt Size: 43"x60" Main Motor: 20HP Max. Stock Width: 42" Min. Part Length: 13" Max. Thickness Opening: 5" Feed speed: 15-45 FPM Passline height: 33"-38" Dust extraction: 1000 CFM (5" static) Compressed air usage: 2 CFM @ 90 psi Standard s: Air Operated Disc Brakes ...more
43" Cantek #PR4375DA, 2-head belt sander, 49 HP, 575 V.
Category: Woodworking Sanders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Cantek
Model: PR4375DA
SKU: 127772, Model: PR4375DA, Condition: Used, S/N: 080224, Horsepower: 49 hp, Max. Workpiece Width: 43 ", # of Belts: 2, Type: Belt, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 95.00 (H) x 79.00 (W) x 69.00 (L) inches, Additional.
43" SCMI #Sandya-7S, 2-Head Wide Belt Sander, 43" x 85" belt, 2005
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scmi
Model: SANDYA-7S
Year: 2005
Belt size 43” x 85”, (2) six inch dust ports, 1st head 24 HP 230, 2nd head 18 HP 230, Fiest head contact drum, Second head combination with finish platen, Feed rate 3 to 68 feet per minute, Weight 4550 lbs, 230 volt 3-phase.
43" DMC #Unisand-K, 4-Head Wide Belt, 44" x 103" abrasive belt, 11- 60 FPM, 5.5 HP, 2007
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND K
Year: 2007
DMC UNISAND K 1100 Wide belt sander4-Head, 43" (1,100 mm) max. width cap. Head sequence: (3) Contact rolls and (1) Combi with roller and segmented platen.Heads configuration: -- 1st Head: Helical grooved steel contact roll, 10" dia., 48 HP motor. -- 2nd Head: Helically grooved rubber covered contact roll, 12-1/2" dia. ...more
