For Sale by JM Industrial LLC
Surplus Record Dealer Since 1993
Sheldon Sharp
304-27...> Show Seller's Phone Number 304-273-0795 Let the seller know you found their listing on Surplus Record!
Description
Used 420 CFM (60 sq ft.) Smoot Dust Collector with Rotary Airlock Valve
Smoot Dust Collector with Rotary Valve
3" & 4" Dirty Air Inlets
~13' H Overall
29" ID
12" Round to Square Rotary Airlock
Accomodates (8) 5.75" x 59" Long Bags (Cages included, bags NOT included)
Demonstration video on file.
Smoot Dust Collector with Rotary Valve
3" & 4" Dirty Air Inlets
~13' H Overall
29" ID
12" Round to Square Rotary Airlock
Accomodates (8) 5.75" x 59" Long Bags (Cages included, bags NOT included)
Demonstration video on file.
Inquire Further with JM Industrial LLC!
Buyers Who Viewed This Listing Also Viewed …
450-1400 cfm Donaldson Torit #CPV-2, Dust Collector, 134 sq.ft., Bin Vent
Category: Dust Collectors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Donaldson Torit
Model: CPV-2
Donaldson Torit Dust Collector, Model CPV-2 - Bin vent type with 134 square feet of surface area. Operates between 450-1400 CFM depending on blower size., Square Ft.: 134 square feet of surface area, Basis: As Is, Where Is.
450 scfm Donaldson Torit #WSO10-1, mist collector, 3/4 HP
Category: Dust Collectors
Seller: iGAM
Location: Detroit, MI
Mfr: Donaldson Torit
Model: WSO10-1
DONALDSON TORIT WSO 10-1 used mist collector available. Efficient solution for capturing airborne mist and ensuring cleaner air in industrial settings. Ideal for maintaining healthier work environments. Contact for more., Spec Sheet, DONALDSON TORIT WSO 10-1, Flow Rate. 450 SCFM, Power. 0.8 hp, Dimensions. 40x48x27 ...more
388 CFM, Eurovac #SYS-030-301, industrial central vacuum system, 10 HP, 18" diameter cyclone separator, 10" diameter pre-separator, 85" WC, 208-230 V., 3 phase
Category: Dust Collectors
Seller: Cooper Industries Llc
Location: Millwood, WV
Model: SYS-030-301
ITEM 15236: Used 388 CFM Eurovac I Industrial Central Vacuum System., With 10HP single stage regenerative blower with internal 18″ cyclonic separator housing and a single polyester cartridge filter (30 square ft filter media). Included 10″Ø cyclone pre-separator with 8 gallon solids can. Air inlet ...more
400 acfm CPE #24-CFR-009-C, cartridge filter receiver / dust collector, vertical, 142 sq.ft.
Category: Dust Collectors
Seller: Aaron Equipment Co
Location: Belvidere, IL
Mfr: Cpe
Model: 24-CFR-009-C
Used- CPE Filters Inc Cartridge Filter Receiver / Dust Collector, Model 24-CFR-009-C, Carbon Steel, Vertical. Designed for 400 acfm. 142 Square foot filter area. Dust density 50 lbs cubic foot. Approximate 28" diameter x 36" straight side housing. Dished top, coned bottom. (9) 6" diameter x 24" long filter cartridges. ...more
400 cfm Flexicon, Stainless Steel Dust Collector w/ Fan, 10" diameter x 18" L Cartridge filter, 1/2 HP
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Flexicon
Used 400 CFM Flexicon Stainless Steel Dust Collector With Fan, designed for 10" dia. X 18" L. Cartridge filter. (new filter required) 5" Cincinnati Fan model pb-9, S/N 700443-1, cast aluminum centrifugal blower driven by a Leeson washguard 1/2hp, 3450 rpm, direct drive motor. Collector housing is ...more
