For Sale by Yoder Machinery Sales
Surplus Record Dealer Since 1960
Sales
866-69...> Show Seller's Phone Number 866-692-8933 Let the seller know you found their listing on Surplus Record!
Description
SERIAL .......................... 3899
MODEL ........................... TUJ 50M
SWING OVER WAYS ................. 22"
SWING IN GAP .................... 32"
SWING OVER CROSS SLIDE .......... 14-1/2"
DISTANCE BETWEEN CENTER ......... 160"
SPINDLE SPEEDS .................. 20 TO 1600 RPM
THREADS (ENGLISH) ............... 1 TO 112 TPI
THREADS (METRIC) ................ 0.05 TO 28 MM
FEEDS ........................... .0007 TO 088 IPR
DIAMETER OF HOLE IN SPINDLE ..... 3-1/4"
CHUCKS 4 JAWS ................... 12"
THREAD DIAL ..................... YES
COOLANT WITH CHIP PANS .......... YES
MOTOR ........................... 15 HORSEPOWER
MODEL ........................... TUJ 50M
SWING OVER WAYS ................. 22"
SWING IN GAP .................... 32"
SWING OVER CROSS SLIDE .......... 14-1/2"
DISTANCE BETWEEN CENTER ......... 160"
SPINDLE SPEEDS .................. 20 TO 1600 RPM
THREADS (ENGLISH) ............... 1 TO 112 TPI
THREADS (METRIC) ................ 0.05 TO 28 MM
FEEDS ........................... .0007 TO 088 IPR
DIAMETER OF HOLE IN SPINDLE ..... 3-1/4"
CHUCKS 4 JAWS ................... 12"
THREAD DIAL ..................... YES
COOLANT WITH CHIP PANS .......... YES
MOTOR ........................... 15 HORSEPOWER
Get Your Price from Yoder Machinery Sales!
Buyers Who Viewed This Listing Also Viewed …
22"/31" x 120" Tarnow #TUJ50M, 3-Jaw Chuck, Steady Rest, (18)20-1600 RPM, 3.5" Bore, 1990
Category: Sliding & Gap Bed Lathes
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Tarnow
Model: TUJ50M
Year: 1990
, Capacity:, - Swing over bed.22", - Swing in removable gap.31-1/2", - Swing over carriage.14-1/2", - Available distance between centers.120", Headstock:, - 18 spindle speeds.20-1,600 RPM, - Main drive motor - 7 belt drive.15 HP, - Spindle bore.3-1/2" (D1-11 camlock), - Headstock length bearing on bed.27", - Width of ...more
24" x 160" TOS #SN63B, Engine Lathe, 3" Spindle Bore, 14" Swing over cross-slide, 24' L x 6' H x 50" deep
Category: Sliding & Gap Bed Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Tos
Model: SN63B
“Normal wear from regular use, ways protected with synthetic paste during storage!”, 24″ x 160″ TOS Engine Lathe, power feeds, Mod. SN63B, Swing………………………….24 in., Center dist………………….160″ ...more
22"/31.5" x 157" Tarnow #TUJ-50M, engine lathe, 20-1600 RPM, 3.25" hole, D1-11
Category: Sliding & Gap Bed Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Tarnow
Model: TUJ-50M
SERIAL. 3403 MODEL. TUJ 50M SWING OVER BED. 22-3/8" SWING OVER CARRIAGE. 14-1/2" SWING IN GAP. 31-1/2" DISTANCE BETWEEN CENTERS. 157" CROSS SLIDE TRAVEL. 13" COMPOUND TRAVEL. 8" SPINDLE BORE. 3-3/5" SPINDLE SPEEDS. 20-1600 RPM SPINDEL NOSE. D1-11 LONGITUDINAL FEEDS (98).0007 TO.72 IPR CROSS FEEDS (98).0004 TO.36 IPR ...more
24"/30" x 144" Lansing #24x144, gap bed engine lathe, 4-jaw 20" chuck, inch/metric, Steady Rest, #63111
Category: Sliding & Gap Bed Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lansing
Model: 24X144
SERIAL. 301267, MODEL. 24X144, SWING OVER BED. 24", SWING IN GAP. 30", CENTERS. 144" (12'), CHUCK. 20" 4-JAW, SPINDLE HOLE. 4-1/4" BORE, SPINDLE SPEEDS. (16) 30 TO 1500 RPM, GAP. 12.5" LONG X 3.5" HIGH, THREADING. METRIC / WHITWORTH / MODULO / ENGLISH, TAILSTOCK. 10" TRAVEL, TAILSTOCK TAPER. #5 MT, STEADY REST. ...more
JUST ADDED!
21"/34" x 80" Clausing Colchester #21, toolroom lathe, 15.5" 4-jaw chuck, 12" 3-jaw chuck, 3-1/2" bore, Steady Rest w/rollers, rapid traverse to carriage, Newall DP700 2-Axis digital read out
Category: Sliding & Gap Bed Lathes
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Clausing
Model: 21
Year: 1999
, 15.5 4 jaw chuck, 12 3 jaw chuck, Steady rest w/rollers, Rapid traverse to carriage, Newall DP700 2 axis DRO, Quick change tool post no holders, 6MT in tailstock, Backsplash, Removable chip tray, Taper attachment, Coolant.
