Universal Press & Machinery (UPM)
Ferndale, MI 48220-1501
Platinum Level Dealer
Surplus Record Dealer Since 1977
Contact
About
Buying and selling used metal stamping and fabricating machinery for over 40 years. We will buy a single machine or an entire facility. We are also a sales representative for new Sutherland Mechanical, Hydraulic, Hot and Cold Forging presses. Buy - Sell - Appraise - Auction - LiquidateUniversal Press & Machinery (UPM) is a Surplus Record Platinum Level Dealer:
UPM is a stocking dealer with inventory in our own warehouse.
UPM, LLC has met Surplus Record's standards for ethical dealings with their customers since 1988.
Our family has been in the used machinery business since 1963
Surplus Record Staff visits our facility on a regular basis.
Over 40 years listing with Surplus Record without unresolved complaint or incident.
Products & Services
- Appraisers, Machinery & Equipment
- Brakes, Press
- Coil Handling/Processing Equipment
- Plant Liquidations
- Presses
- Rollformers
- Shears
- Tube Machinery & Mills
Associations & Affiliations
249 listings in 66 categories
Autoclaves
1 Result
WSF Industries, rapidoor autoclave
Category: Autoclaves
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Wsf
(1) Used WSF Industries Rapidoor Autoclave, Working Capacity: 24" x 12" x 15", Working Pressure: 150 PSI, Working Capacity: 24" x 12" x 15", Working Pressure: 150 PSI.
29.5" L x 42" width x 2.5" H, Bolster Plate
Category: Bolster Plates
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 42" Wide x 29.5" Long x 2.5"Tall Bolster Plate, BOLSTER PLATE Bolster, BOLSTER PLATE Bolster.
30" L x 50" width x 4.25" H, Bolster Plate
Category: Bolster Plates
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 50" Wide x 30" Long x 4.25" Tall Bolster Plate, BOLSTER PLATE Bolster, BOLSTER PLATE Bolster.
30" L x 50" width x 4.25" H, T-Slotted Bolster Plate
Category: Bolster Plates
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 50" Wide x 30" Long x 4.25" Tall T-Slotted Bolster Plate, BOLSTER PLATE Bolster, BOLSTER PLATE Bolster.
30.7" L x 15.75" W x 3.94" H, T-Slotted Bolster Plate (3 available)
Category: Bolster Plates
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
780mm LR x 400mm FB x 100mm Thick T-Slotted Bolster Plate, 780mm LR x 400mm FB x 100mm Thick, T-Slots, 780mm LR x 400mm FB x 100mm Thick, T-Slots.
72" L x 24" W x 4" H, T-Slotted Steel Bolster, #11678
Category: Bolster Plates
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: 11678
Bolster Area: 72 L-R x 24 F-B x 4 Thick, T-Slotted, Steel, Bolster Area: 72 L-R x 24 F-B x 4 Thick, T-Slotted, Steel.
C Frame Hydraulic Press Machines (Gap Frame)
8 Results
10 Ton, Magnum #MCB10A, bench gap frame press, 8" stroke, 16" daylight, 8" Shut Height, 8" throat, Allen Bradley MicroLogix PLC, 2023
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Magnum
Model: MCB10A
Year: 2023
Introducing the 2025 Magnum 10 Ton Hydraulic Press Model MCB10A. This new bench model s a 16.5" x 13" bed, 8" stroke, and speeds of 400 ipm. Allen Bradley controls and safety s, it ensures efficient and reliable operation., NOTE: 18 Months Parts Warranty, Capacity: 2.1 - 10.4 Ton, Stroke: 1" to 8", Daylight: 16", Shut ...more
12 Ton, Neff #D12-5M, hydraulic gap frame press, 7" stroke, 18" daylight, 7" throat, 5 HP, 1997, #8625
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Neff
Model: D12-5M
Year: 1997
Serial Number: 10799, Capacity: 12 Ton, Stroke: 0-7, Daylight Opening: 18, Throat: 7, Ram Diameter: 3.25, Distance Floor to Bed: 30, Slide Area: 10 x 21, Rotary Table: 30 Diameter, Speeds:, 240 IPM Advance, 90 IPM Press, 146 IPM Return, 5 HP Motor, ATC Controls, ATC 4-Station Rotary Table, Load/Unload Unit, 12 Gallon ...more
17.6 Ton, Magnum #HBM-15-A, C-frame hydraulic press, 8" stroke, 2.5" rod diameter, 16" daylight, 18" x 14" bed, 1998
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Magnum
Model: HBM-15-A
Year: 1998
(1) Used 17.6 Ton Magnum C-Frame Hydraulic Press, Stroke Range: 0.5 - 8, Rod Diameter: 2.50, Cylinder Rod End: SAFE Coupler, Rated Pressure: 2500 PSI (3000 PSI Maximum), Rated Tonnage: 17.6 Ton, Minimum Shut Height: 8, Maximum Daylight: 16, Throat: 8, Bed Size: 18 L-R x 14 F-B, Reservoir Capacity: 20 Gallons ...more
20 Ton, Multipress #FH-20, 4-post guided ram, 12" stroke, 25" daylight, 20 HP, 32" x 18" bolster, #10661
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Multipress
Model: FH-20
Hydraulic Press, 4 Post, 20 Ton, 32 x 18 Bolster size, 30 x 16 Post space, 12 Stroke, 25 Daylight, 20 HP, Ram Speeds IPM @ 1800 RPM 60Hz, Closing: 550, Pressing: 250, Return 600, Bore IN: 4-1/2, Ram IN: 3-1/4, MAX PSI: 2516, Reservoir Capacity GAL: 55, Weight: 3,200 LBS, Hydraulic Press, 4 Post, 20 Ton, 32 x 18 ...more
20 Ton, Multipress #FH-20, 4-post ram, 12" stroke, 25" daylight, 20 HP, 32" x 18" bolster, #10662
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Multipress
Model: FH-20
Hydraulic Press, 4 Post Guided Ram, 20 Ton, 32 x 18 Bolster size, 30 x 16 Post space, 12 Stroke, 25 Daylight, 20 HP, Ram Speeds IPM @ 1800 RPM 60Hz, Closing: 550, Pressing: 250, Return 600, Bore IN: 4-1/2, Ram IN: 3-1/4, MAX PSI: 2516, Reservoir Capacity GAL: 55, Weight: 3,200 LBS, Hydraulic Press, 4 Post Guided Ram ...more
20 Ton, RAM #10-386, gap frame hydraulic press, down-acting, top mounted hydraulics, #10409
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Ram
Model: 10-386
Cpacity: 20 Ton, C Frame Downacting, New Controls by Veugen integrated Technologies, Top Mounted Hydraulics, Cpacity: 20 Ton, C Frame Downacting, New Controls by Veugen integrated Technologies, Top Mounted Hydraulics.
35 Ton, Magnum #CF35M, hydraulic C-frame press, 10" stroke, 16.3" daylight, 6.3" Shut Height, 8" throat, 19" x196" bed, 10 HP TEFC motor, 20 gallon reservoir, 2024
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Magnum
Model: CF35M
Year: 2024
(1) NEW 35 Ton Magnum C Frame Hydraulic Press, Capacity: 7.1 to 35.0 Ton (adjustable), Bed Area: 19" lr x 16" fb, Stroke: 1" to 10" (adjustable), Daylight: 16.3", Shut Height: 6.3", Throat: 8", Speeds:, Rapid Advance: 55 ipm (120 ipm with optional #3 Regen), Pressing: 55 ipm, Retract: 67 ipm, Reservoir: 20 gallon ...more
100 Ton, Greenerd #H-100-30L5, hydraulic gap frame press, 12" stroke, 20" daylight, 10 HP, #10585
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Greenerd
Model: H-100-30L5
Capacity: 100 Ton, Stroke: 12, Daylight: 20, Throat: 13, Bed Area: 30 lr x 21.25 fb, Bolster: 3.25 thick, T-slotted, Oil Resevoir: 134 Gallon, Max PSI: 3000, Main Cylinder: 8 diameter, Motor: 10 HP, Voltage: 208/3/60, Approx Dimensions: 38 lr x 85 fb x 104 high, Approx Weight: 13,000#, Capacity: 100 Ton, Stroke: 12 ...more
Koolant Koolers #SCV-20000-PR-NF, chiller, 20 HP compressor, 3 HP pump, R-22 refrigerant, 44.6 Amp.
Category: Chillers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: SCV-20000-PR-NF
(1) Used Koolant Kooler Model SCV20,000-PR-NF Chiller, 20HP Compressor, 3HP Pump, R-22 Refrigerant / 40 Lb, 460V/3PH/60Cycle, 44.6 AmP, 20HP Compressor, 3HP Pump, R-22 Refrigerant / 40 Lb, 460V/3PH/60Cycle, 44.6 AmP.
Koolant Koolers #SCV-25000PR-NF-FH, chiller, 25 HP compressor, 3 HP pump, R-22 refrigerant, 460 V., 3-phase, 67 Amp.
Category: Chillers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: SCV-25000PR-NF-FH
(1) Used Koolant Kooler Model SCV-25000PR-NF-FH Chiller, 25 HP Compressor, 3HP Pump, R-22 Refrigerant / 50 Lb, 460V/3PH/60Cycle, 67Amp, 25 HP Compressor, 3HP Pump, R-22 Refrigerant / 50 Lb, 460V/3PH/60Cycle, 67Amp.
CNC Horizontal Boring Mills - Table Type
1 Result
4.3" Toshiba #BTD-100R16, CNC Horizontal Boring Mill, 55.1" x 63" rotary table, 78.7" X, 59.1" Y, 57.1" Z, 19.7" spindle travel, 3000 RPM, Tosnuc 888 control
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Toshiba
Model: BTD-100R16
Type of CNC Control: Tosnuc 888, Spindle Diameter: 4.3", Table Size: 63" x 55.1", Max Table Load: 13860 lb, X-Axis Travel: 78.7 in, Y-Axis Travel: 59.1 in, Z-Axis Travel: 57.1 in, W-Axis Travel: 19.7 in, B-Axis (Pallet Indexing): 0.001, Spindle Taper: CAT 50, Spindle Speed: 3,000 rpm, Spindle Motor: 20 hp, Tool ...more
Haas #TL-2, CNC tool room lathe, 20" swing, 8" chuck, 2.3" bar, 48" centers, 16" dia., 48" lgth, A2-5, 2007
Category: CNC Lathes and Turning Centers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Haas
Model: TL-2
Year: 2007
Swing: (open front apron) 20", Swing: (over cross slide) 11", Chuck Size: 8", Max Cutting Diameter: (w/tool post) 16", Max Cutting Length: (w/tool post) 48", Distance Between Centers: 48", Travels:, X Axis: 8", Z Axis: 48", Feed Rates:, Rapid on X Axis: 450 IPM, Rapid on Z Axis: 450 IPM, Spindle Nose: A2-5, Bar ...more
Coil Cradles and Straighteners
1 Result
10000 lb. Colt #CSHC-100-12, coil cradle / straightener, 12" x 0.230" stock, 72" outside dimension, 1992
Category: Coil Cradles and Straighteners
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Colt
Model: CSHC-100-12
Year: 1992
(1) Used 10,000 LBS x 12" Wide x 0.230" Thick Colt Coil Cradle / Straightener, Coil Weight Capacity: 10,000 LBS, Coil OD: 72", Material Max Width: 12", Mild Steel, Min. - Max. Material Thickness: 0.070"-0.0230" @ 12" Wide / 0.312" @ 6" Wide, Coil Weight Capacity: 10,000 LBS, Coil OD: 72", Material Max Width: 12", Mild ...more
4000 lb. Press Room Equipment #PR-124000-RAD, 12" W x .092" thick, servo feed line, 7 roll, 1997, #10713
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Press Room Equipment
Model: PR-124000-RAD
Year: 1997
(1) Used 4,000# x 12 wide x.092 thick PRE Complete Servo Feed Line, S/N 0402-014, SERVO FEEDER, SERIAL #: 0402-014, NEW 2002, MODEL #: PI20F12-SE1, 12 WIDTH,.092 x 12 CAPACITY, RIGHT TO LEFT FEED DIRECTION, STRAIGHTENER, 7 ROLLS, 2 PINCH, 4 COIL BREAKER ROLLS, 12 WIDE,.092 CAPACITY AT FULL WIDTH, 100 FPM SPEED ...more
4188 lb. Orii #LCC04HB2HAX, space saver servo feed line, 16" x .177", 7-roll, #11291
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Orii
Model: LCC04HB2HAX
(1) Used 4,188# x 16 Wide x.177 Thick Orii Space Saver Servo Feed Line., Max Coil Weight: 4188#, Max Coil Width: 16, Coil Thickness Range:.0118 @ full width -.177 @ 3.9 wide, Max Coil OD: 55, Coil ID: 20, Max Feed Length: 19.68, 7 Roll Straightener - 4 upper / 3 lower, Power Expansion, Adjustable Roller Coil Guides ...more
6000 lb. Coe Press Equipment #CPR-PO-6018 / CPPS-PO-225-18 / CPRF-318, servo feed line, 18" x.125"stock, manual expansion, 6 keepers
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Model: CPR-PO-6018
(1) Used 6,000# x 18 wide x.125 thick Coe Servo Feed Line, Uncoiler:, Model: CPR-PO-6018, Max Coil Weight: 6000#, Max Coil Width: 18, Max Coil OD:, Coil ID Range:, Manual Expansion, (6) Keepers, Straightener:, Model: CPPS-PO-225-18, Max Width: 18, Max Thickness:.125, Feeder:, Model: CPRF-318, Max Width: 18, Max ...more
6000 lb. Minster #MEF4-26S/MSH20-26-7/MEF4-26S, coil feed line, 26" x .150" stock, 60" OD, 16"-20" ID,
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: MEF4-26S/MSH20-26-7/MEF4-26S
Used Minster 6,000 lb x 26" Coil Feed Line, Model MEF4-26S. Handles up to 0.02" thick coils. Includes reel, straightener, and feeder. Max width: 26", max OD: 60", line speed up to 1200 IPM. Ideal for precision metal processing needs., COIL REEL:, Model: MR 6-26S, Serial#13-70460, Max Coil Weight: 6,000#, Max Coil ...more
10000 lb. CWP, 24" x .093" servo feed line, 72" OD, 15.5"-20.5" ID, (5) 2.25" diameter roll, 100 FPM, 2013
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cwp
Year: 2013
(1) Used 10,000 Lbs x 24 x.093 Cooper Weymouth Peterson Servo Feed Line, Year 2013, Coil Capacity 10,000 lbs., Max. Width 24", Max. Material Thickness.093", Min. Material Thickness.015", Max. Coil O.D. 72", ID Range 15.5" - 20.5", Max. Coil Car Platform Lift 24", Max. Line Speed 100 fpm, Roll Diameters - Straightener ...more
15000 lb. Coe Press Equipment #CCL-S3-15032, 30" x .25" stock, 72" OD, 18.5"-20.5" ID, coil car, (8) 3.5" diameter rolls, 45" passline, 2012
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Model: CCL-S3-15032
Year: 2012
(1) 15,000 Lbs x 30" x.100" Coe Space Master Series 3 Compact Coil Line, Machine :, Feed Direction: Right to Left, Voltage: 460, Material :, M.C.R.S. - Max: 0.100" thick @ 30" wide, 55 HSLA - Max: 0.250" thick @ 9" wide, Feeder-Straightener :, Full Body Width: 30", Feed Drive: 15 KW, Drive Ratio: 14:1 Ratio ...more
15000 lb. Coe Press Equipment #CPCFS-500-7, servo feed line, 36" x .375" stock, 60" OD, 1990
Category: Coil Feed Lines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Model: CPCFS-500-7
Year: 1990
(1) Used 15,000# x 36" x.312" thick COE Coil Cradle Straightener Feeder Space Saver Servo Feed Line, Coil Cradle:, Max Coil Weight: 15,000#, Max Coil Width: 36", Max Coil OD: 60" (72"), Straightener:, Max Coil Width: 36", Max Thickness:.375", Feeder:, Min Coil Width: 1.5", Max Coil Width: 36", Max Material ...more
20000 lb. Bushman #624, c-hook style coil lift, 48" W, 1998
Category: Coil Lifters/Tongs
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bushman
Model: 624
Year: 1998
(1) Used 20,000# x 48" wide Bushman C-Hook Style Coil Lifter, Max Coil Weight: 20,000#, Max Coil Width: 48", Unit Weight: 1,840#, Max Coil Weight: 20,000#, Max Coil Width: 48", Unit Weight: 1,840#.
40000 lb. Bushman #624, c-hook style coil lift, 72" W, 2004
Category: Coil Lifters/Tongs
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bushman
Model: 624
Year: 2004
(1) Used 40,000# x 72" wide Bushman C-Hook Style Coil Lifter, Max Coil Weight: 40,000#, Max Coil Width: 72", Unit Weight: 2,350#, Max Coil Weight: 40,000#, Max Coil Width: 72", Unit Weight: 2,350#.
40000 lb. Cady Lifters #7018EC, coil lifter
Category: Coil Lifters/Tongs
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cady
Model: 7018EC
(1) Used 40,000# Cady Lifters #7018EC Coil Lifter, Capacity: 40,000#, Capacity: 40,000#.
50000 lb. Cady Lifters #7826ECM, coil lifter, 1989
Category: Coil Lifters/Tongs
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cady
Model: 7826ECM
Year: 1989
(1) Used 50,000# Cady Lifters Model 7826ECM Coil Lifter, Coil Capacity: 50,000#, Coil Capacity: 50,000#.
Coil Reels and Straighteners (Combination)
2 Results
2500 lb. Coe Press Equipment #CPR-PO-2512 / CPPS-PO-225-12, uncoiler & powered straightener, 12" W, 60" OD, 16"-20" ID, manual expansion, 6-keepers, 5-rolls, entry/exit pinch rolls
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Model: CPR-PO-2512
(1) Used 2,500 Lbs x 12" x.080" thick (.125" @ 6") Wide Coe Uncoiler & Powered Straightener, Coe Press Coil Reel, Model: CPR-PO-2512, S/N: 5325-2, Max Coil Weight: 2,500#, Coil Width: 12", Coil O.D.: 54", Coil I.D.: 16"-20", Manual Expansion, (6) Coil Keepers, Air Drag Brake, Holddown Arm, Coe Press Powered ...more
10000 lb. Littell #90-30 / S200, coil reel w/ coil car & straightener, 30" W, 60" OD, 20"-24" ID, hydraulic expansion, 2 coil keepers, variable speed, 7-rolls, Allen Bradley PLC interface, 2018, #10589
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 90-30
Year: 2018
(1) Used 10,000 Lbs x 24 Littell Coil Reel with Coil Car & Straightener, Line Runs Left to Right, Littell Model#90-30 Coil Reel With Coil Car, Year: 1980, Coil Capacity: 10,000 Lbs, Coil Width: 30, Coil ID: 20 - 24, Coil OD: 60, Floor to Centerline of Mandrel: 63.5, Hydraulic Expansion, Inch Forward / Reverse ...more
Crane Equipment and Parts - Miscellaneous
4 Results
15 Ton, 30000 lb., Crane Scale, Hydroscale, #11434
Category: Crane Equipment and Parts - Miscella...
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Crane
(1) Used 30,000 Lbs Hydroscale Hanging Crane Scale, Capacity: 30,000 lbs, Capacity: 30,000 lbs.
20 Ton, 40000 lb., Crane Scale, Hydroscale, #11435
Category: Crane Equipment and Parts - Miscella...
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Crane
(1) Used 40,000 Lbs Hydroscale Hanging Crane Scale and Rolling Stand, Capacity: 40,000 lbs, Rolling Stand, Capacity: 40,000 lbs, Rolling Stand.
20 Ton, 40000 lb., Hydroscale #A20-24, hanging crane scale, cart
Category: Crane Equipment and Parts - Miscella...
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Hydroscale
(1) Used 40,000# Capacity Hydroscale Crane Scale, Hanging Crane Scale, Capacity: 40,000#, Cart, Hanging Crane Scale, Capacity: 40,000#, Cart.
50 Ton, 100000 lb., Hydroscale, crane scale on wheels
Category: Crane Equipment and Parts - Miscella...
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 100,000# Hydroscale Crane Scale on Rolling Stand, Scale Capacity: 100,000#, Scale Stand on Wheels, Scale Capacity: 100,000#, Scale Stand on Wheels.
Die Cutting Press Machines
1 Result
40 Ton, Simard #TW-588, traveling head die cutting press, 64" x25.5"bed
Category: Die Cutting Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Simard
Model: TW-588
Used 40 Ton Simard TW-588 Traveling Head Die Cutting Press available. s a 64" x 25.5" cutting bed and 25.5" x 25.5" cutting head. Ideal for precise tasks. Excellent choice for high-capacity operations demanding efficiency and reliability., Cutting Bed Area: 64" lr x 25.5" fb, Cutting Head Area: 25.5" lr x 25.5" fb ...more
Die Tryout and Spotting Presses
7 Results
50 Ton, Reis #TUS-80-OK-50, mold spotting & try-out press, 39.37" stroke, 41.33" daylight, 1996
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS-80-OK-50
Year: 1996
(1) Used 50 Ton Reis Mold Spotting and Try-out Press, New: 1996, Nominal Force: 50.98 US Ton (500 KN @ 200 bar), Max. Retraction Force: 25.49 US Ton (250 KN), Daylight Opening: 41.33 (1050mm) + 3.93 (100mm Daylight Enlargement): 45.26, Stroke: 39.37 (1000mm) +3.93 (100mm Extension): 43.3, Table Surface Area: 43.30 L-R ...more
90 Ton, Reis #TUS90-OK, hydraulic 4 Post spotting press, 40" stroke, 40.75" daylight, 47.25" x 35.44" bed, #11363
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS90-OK
(1) Used 90 Ton Reis Hydraulic 4 Post Spotting Press, Capacity: 90 Ton, Stroke: 40, Daylight: 40.75, Bed Area: 47.25 x 35.44, Max weight on lower plate: 15,432#, Max weight on upper plate: 7,716#, Lower Table overturning: 10 degrees, Upper table overturning: 180 degrees, Capacity: 90 Ton, Stroke: 40, Daylight: 40.75 ...more
100 Ton, Sanki #SPD1310-100TD, hydraulic spotting press, 38.4" stroke, 41.2" DL, 10 HP, 51" x39" bed, 1993
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Sanki
Model: SPD1310-100TD
Year: 1993
(1) Used 100 Ton Sanki Hydraulic Spotting Press, Capacity: 100 Ton, Bed & Ram Area: 51 x 39, Stroke: 38.4, Daylight Opening: 41.2, Max Mold Weight on Table: 12,000#, Max Upper Platen Mold Weight: 6,000#, Motor: 10 HP, Voltage: 480/3/60, Floor Space Required: 160 x 105 x 172 tall, Slide out Bolster, Flip out Ram ...more
100 Ton, Hydraulic Die Spotting Press, 40" stroke, 42.5" daylight, 34" LR x 50" front back planten
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 100 Ton Hydraulic Die Spotting Press, All Subject To Verification, Approximate Tonnage: 100, Approximate Stroke: 40, Approximate Daylight Opening: 42 1/2, Platen Area: 34 L-R x 50 F-B, Distance Between Posts 48, Roll Out Shuttle Table, Lower Ejector, Swivel Down Ram - Approx. 180 Degrees, Console Control ...more
112 Ton, Amino #DSP-100Y, hydraulic down acting spotting press, 67" stroke, 87" DL, 20" Shut Height, 2008
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Amino
Model: DSP-100Y
Year: 2008
(1) Used 112 Ton Amino Hydraulic Down Acting Spotting Press, Capacity: 112 Ton, Lifting Capacity: 50 Ton, Maximum Die weight: 20 Ton, Maximum Upper Die weight: 10 Ton, Stroke 67, Daylight: 87, Shut Height: 20, Bed & Slide Area: 118 L-R x 79 F-B, Floor To Top Of Bed: 29, Speeds:, Fast Advance: 188 IPM, Fast Return: ...more
112 Ton, Reis #TUS-125-OK, hydraulic die spotting press, 53" stroke, 53" DL, 60" x 48" bed, flip out ram, slide out bolster, 1984, #11609
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS-125-OK
Year: 1984
(1) Used 112 Ton Reis Hydraulic Die Spotting Press, subject to verification, Model: TUS 125-OK, Serial Number: 03.040.00, Capacity: 112 Ton, Bed Area: 60 x 48, Stroke: 53, Daylight: 53, Slide Out Bolster, Flip Out Ram, Estimated Weight: 28,000 lbs, Approximate Overall Dimensions: 106 L-R x 8.6 F-B x 156 High, subject ...more
224 Ton, Reis #TUS-180-OK-200, hydraulic 4-post spotting press, 71" stroke, 98" DL, 71" x 98" bed, 1994
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS-180-OK-200
Year: 1994
(1) Used 224 Ton Reis Hydraulic 4 Post Spotting Press, Serial#04.023.00, Capacity: 224 Ton, Table Size: 71" lr x 98" fb, Swivel Platen Size: 71 lr x 98 fb, Stroke: 106, Dayllight Opening: 118, Distance Between Columns: 74 lr, Table Capacity: 67,442 pound force, Swivel Platen Capacity; 26,977 pound force, Oil Reservoir ...more
Double Cranked Back Gear OBI Press Machines
1 Result
60 Ton, Rousselle #6B76, 2" stroke, 12" Shut Height, 3" adj., 50 SPM, 76" x18"bed,air cooled & brake, 1968, #9716
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 6B76
Year: 1968
Serial Number: 12887, Capacity: 60 Ton, Stroke: 2, Shut Height:12.5 (SDAU), Slide Adjustment: 3, Bed Area: 76LR x 18FB, Slide Area: 64LR x 15FB, Speed: 50 SPM, Air Clutch & Brake, Air Counterbalance, Incline Adjustment Screws, Motor, Electrics and Controls, Estimated Height: 126, Estimated Weight: 10,500#, Serial ...more
Monarch, engine lathe
Category: Engine Lathes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Monarch
MONARCH _UNKNOWN_, MONARCH _UNKNOWN_.
Feeding and Straightening Machines
2 Results
12" x .09" Littell, powered straightener, 17-roll, Coiltek loop Control, #11501
Category: Feeding and Straightening Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 11501
Coil Width: 12, Material Thickness:.090, Straightening Rolls: 17, Motorized, Coiltek Loop Control, Coil Width: 12, Material Thickness:.090, Straightening Rolls: 17, Motorized, Coiltek Loop Control.
24" x .25" Perfecto #38-26-9, powered straightener, #10927
Category: Feeding and Straightening Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Perfecto
Model: 38-26-9
Material Width: 24 Maximum., Material Thickness:.034 -.250 @ 24 Wide - 50,000 Yield, (9) Roll Straightener - 3.8 Diameter Rolls, Straightening Rolls Backed-Up: Top & Bottom, Entry & Exit Pinch Rolls - 5.5 Diameter, Peeler, Loop Control Arm, Requires new electrics, controls and hydraulic unit. Sold As Is. ...more
500 Ton, Clearing #S4-500, press & blanking line, 12" stroke, 48" Shut Height, 20" adj., 15-50 SPM, 186" x 108" bed
Category: Fine Blanking Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Clearing
Model: S4-500
(1) Used 500 Ton Clearing Press and Blanking Line, Tonnage: 500 Ton, Bed Area: 186" x 108", Slide Adjustment: 20", Pass Line: 30, Shut Height Min: 28", Shut Height Max: 48", Bolster T-Slots: 6, Stroke: 12", Speed: 15-50 SPM, Distance Between Gibs: 90", Bed to Gibs: 186", Bed Above Floor: 28", Bolster Thickness: 28" ...more
Flat and Shape Straighteners for Coil Handling
5 Results
6" x .078" CWP #6EFT, 7-roll straightener, entry/exit pinch, 75 FPM, #11065
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cwp
Model: 6EFT
(1) Used 6 x.078 Dickerman 7 Roll Powered Straightener, Max Material Width: 6, Material Thickness:.020 -.078, 7 Straightening Rolls, Entry and Exit Pinch Rolls, Max Speed: 75 FPM, Photo Loop Eye, Currently Wired: 110/1/60, Approx Dimensions: 30 lr x 24 fb x 48 high, Approx Weight: 1000#, Max Material Width: 6 ...more
6" Dynamic Feeds Inc #SOPP916032u-1250DB, powered straightener, 9 roll straightener
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dynamic
Model: SOPP916032U-12
(1) Used 6" wide x.050" Dynamic Feeds, Inc. Powered Straightener, Model: SOP/P/9/160/32/U-1250/D/B, S/N: 140395, Coil Width: 6", Coil Capacity: 0.010" - 0.050" (estimated), (9) Roll Straightener, 440 Volt, Model: SOP/P/9/160/32/U-1250/D/B, S/N: 140395, Coil Width: 6", Coil Capacity: 0.010" - 0.050" (estimated), (9) ...more
18" x .05" Littell #418-5PD, powered straightener, 5-rolls,loop Control arm, 1954, #10423
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 418-5PD
Year: 1954
Used 18 Littell powered straightener, Model 418-5PD, From 1954. s include max coil width 18", thickness 0.05", 5 straightening rolls, loop control arm, variable speed, and jog forward/reverse. Serial no. 55145-54., Serial Number: 55145-54, Capacity:.050 @ 18 Wide, (5) Straightening Rolls, Loop Control Arm, Variable ...more
20" x .065" Rowe #R20, motorized straightener, 7 roll, cabinet on casters, forward / reverse, loop Control, 1960
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rowe
Model: R20
Year: 1960
(1) Used 20" Wide Rowe Model R20 Motorized Straightener, Model: R20, S/N: 7658, Max. Coil Width: 20", Material Thickness:.020"-.065", (7) Roll, Cabinet on Casters, Variable Speed, Run / Jog, Forward / Reverse, Loop Control, Model: R20, S/N: 7658, Max. Coil Width: 20", Material Thickness:.020"-.065", (7) Roll, Cabinet ...more
48" x .093" CWP #48D-11, straightener, 11 roll, entry & exit pinch rolls, loop Control, 58" passline, 4.2" pinch diameter, 2.8" roll diameter
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cwp
Model: 48D-11
(1) Used 48" wide x.093" thick (11) Roll CWP Staightener, CWP Straightener:, 48" MAX WIDTH,.021" -.093" CAPACITY, 11 ROLL STRAIGHTENER, ENTRY + EXIT PINCH ROLLS, LOOP CONTROL, CAN ACCEPT 52" WIDE MATERIAL, 58" PASSLINE, 4.20" PINCH ROLL DIAMETER, 2.80" STRAIGHTENING ROLL DIAMETER, 3.25" CENTER DISTANCE, 10 HP, 460V ...more
Forklift Truck Attachments - Miscellaneous
2 Results
Forklift Forks, 60" L x 6" W x 2-1/2"T, 38" fork height, 29" mast carriage (2 available)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(2) Used 60" Forklift Forks, Fork Size: 60"Long x 6" Wide x 2-1/2" Thick, Fork Height: 38", Mast Carriage Distance: 29", Fork Size: 60"Long x 6" Wide x 2-1/2" Thick, Fork Height: 38", Mast Carriage Distance: 29".
Forklift Forks, 60" L x 5" W x 2" T, 25.5" fork height, 20" mast carriage (4 available)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(4) Used 60" Forklift Forks, Fork Dimensions: 60"Long x 5"Wide x 2"Thick, Fork Height: 25-1/2", Mast Carriage Distance: 20", Fork Dimensions: 60"Long x 5"Wide x 2"Thick, Fork Height: 25-1/2", Mast Carriage Distance: 20".
Forklifts
5 Results
3800 lb. Clark #ESM1125, standup electric forklift, 186" lift height, 24" load center, batteries & charger
Category: Forklifts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Clark
Model: ESM1125
CLARK ESM1125 Fork Truck available in used condition. Reliable and efficient, it's perfect for your material handling needs. Ideal for warehouses or industrial settings. Don't miss this opportunity to enhance your operations with trusted CLARK performance., Lifting Capacity: 3,800# (24" load center), Max Lift ...more
5500 lb. Hyster #S80XM-BCS, 48" forks, 176" lift, cascade sgl-dbl pallet handler, #10747
Category: Forklifts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Hyster
Model: S80XM-BCS
(1) Used 5,500# Capacity Hyster Fork Lift, Max Capacity: 5,500#, Fork Length: 48, Max Lift: 176 (Forks to Floor), Cascade Single-Double Pallet Handler, Extending forks up to 610 wide, as narrow as 28 wide, Cushion Tires, LP Gas, Attachment: Cascade 55D-RRB-10B, Hours: 7210, Approx Dimensions: 144" long x 50" wide x ...more
6500 lb. Crown #C5-1050-60, enclosure cab forklift, 24" load center, LPG, hydrostatic steering, 171" lift height, 72" fork length, 2021
Category: Forklifts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Crown
Model: C5-1050-60
Year: 2021
(1) Used 6,500# Crown Model C5-1050-60 Enclosed Cab Forklift, Capacity: 6500#, Load Center: 24", Fuel: LPG, Steering Type: Hydrostatic, Lift Height: 171" (2 Stage Mast), Fork Length: 72", Side Shift, Enclosed Cab, Approx Hours: 1700, Capacity: 6500#, Load Center: 24", Fuel: LPG, Steering Type: Hydrostatic, Lift ...more
8000 lb. Clark #C500S80, fork lift, LP, 58" L x 6" W forks, 1993, #10456
Category: Forklifts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: C500S80
Year: 1993
(1) Used 8,000# Clark Fork Lift, Model: C500S80, S/N: 685-0145-9150KF 293, Attachments: 100D-SS-51B S/S, Type: LP - (Tank not included), 8,854 Hours - Estimated, Triple Mast - 170 Vertical, Side Shift, Forks: 58 Long x 6 Wide, Solid White Tires / (4) Spare Black Tires, Completely rebuilt brakes and lift cylinders ...more
15000 lb. Hyster #S125A-BCS, LP gas forklift, 126" lift height, 24" load centers, 60" forks, cushion tires, manual transmission, rebuilt 1997
Category: Forklifts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Hyster
Model: S125A-BCS
(1) Used 15,000# Hyster Fork Lift, Capacity: 15,000#, Lift Height: 126", Load Center: 24", FOrk Length: 60", Cushion Tires, LP Gas, Manual Transmission, Rebuilt in 1997, NOTE: Needs to have brakes done., Hours: 5028, Capacity: 15,000#, Lift Height: 126", Load Center: 24", FOrk Length: 60", Cushion Tires, LP Gas ...more
Gantry Type Machining Center
1 Result
Tarus #HSOHTB810, CNC bridge gantry mill, 118" X Travel, 98" Y Travel, 43" Z, 10k RPM, #50, 120" x87" tbl., 2024 rebuilt
Category: Gantry Type Machining Center
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Tarus
Model: HSOHTB810
2005 Tarus HSOHTB810 3 + 2 Bridge Gantry Mill, used. Ideal for precise operations, this robust machine from TARUS ensures quality and reliability in vertical machining applications., 3 + 2 Axis Head, X Axis Travel: 118", Y Axis Travel: 98", Z Axis Travel: 43", B Axis Rotation: 0 - 360, A Axis Rotation: 0 - 45, Spindle ...more
Gap Frame Double Crank Press Machines
6 Results
60 Ton, Rousselle #6B-60, double crank gap frame press, 4" stroke, 13.5" Shut Height, 3" adj., 60" x18"bed, 110 SPM, 1978
Category: Gap Frame Double Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 6B-60
Year: 1978
(1) Used 60 Ton Rousselle Model 6B-60 Double Crank Gap Frame Press, Capacity: 60 Ton, Stroke: 4", Slide Adjustment: 3", Shut Height: 13 1/2" Over Bed, Bed Area: 60"LR x 18"FB, Slide Area: 48"LR x 16"FB, Speed: 110 SPM, Capacity: 60 Ton, Stroke: 4", Slide Adjustment: 3", Shut Height: 13 1/2" Over Bed, Bed Area: 60"LR x ...more
60 Ton, Rousselle #6B-60, OBI press, 4" stroke, 13.5" Shut Height, 3" adj., 18" x60" bed, 110 SPM, air clutch & brake
Category: Gap Frame Double Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 6B-60
(1) Used 60 Ton Rousselle Model 6B-60 OBI Press, Catalog - Subject to Verification, Capacity: 60 Ton, Stroke: 4", Shut Height: 13.5", Slide Adjustment: 3", Bed Area: 60"LR x 18"FB, Speed: 110 SPM, Catalog - Subject to Verification, Capacity: 60 Ton, Stroke: 4", Shut Height: 13.5", Slide Adjustment: 3", Bed Area: 60"LR ...more
60 Ton, Rousselle #6K60F, double crank gap frame press, 2" stroke, 12.5" Shut Height, 3" adj., 10" throat, Link 5100 MPC, air clutch & brake, 2023
Category: Gap Frame Double Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 6K60F
Year: 2023
(1) NEW 60 Ton Rousselle 6K60F Double Crank Gap Frame Presses, Capacity: 60 Ton, Stroke: 2, Adjustment: 3 (manual), Bed Area: 60 lr x 18 fb, Bolster Size: 60 lr x 18 fb x 2 thick ( plain bolster plate), Slide Area: 49.5 lr x 16 fb, Shut Height over Bed: 12.5, Shut Height ove Bolster: 10.5, Depth of Throat: 10, Width ...more
110 Ton, Stamtec #G2-110, double crank gap frame press, 7.09" stroke, 17.75" Shut Height, 3.94"adj, 70.8"x25.6"bed, 35-65 SPM, air clutch & brake, 1987
Category: Gap Frame Double Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Stamtec
Model: G2-110
Year: 1987
(1) Used 110 Ton Stamtec Model G2-110 Double Crank Gap Press, Model: G2-110, Capacity: 110 Ton, Stroke: 7.09", Die Height: 17.75", Ram Adjustment: 3.94", Bed Area: 70.8"LR x 25.6"FB, Ram Area: 55.1"LR x 19.6"FB, Speed: 35-65 SPM, Air Clutch & Brake, Toledo Transducer Press Pilot - 150 Press Control, Model: G2-110 ...more
200 Ton, Niagara #S2G-200-60-42, 8" stroke, 30" Shut Height, 10" adj., T-Slotted, air clutch & brake, #10559
Category: Gap Frame Double Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Niagara
Model: S2G-200-60-42
Used 200 Ton Niagara Double Crank Gap Press, model S2G-200-60-42, 1970. s 60x42-inch bed, 200T capacity, 8-inch stroke, double crank, air clutch & brake, and T-slotted bolster/ram. light curtains and pneumatic cushion. Catalog weight: 66,800 lbs., Capacity: 200 Ton, Stroke: 8, Shut Height: 22.5, SDAU Over Bed ...more
220 Ton, Aida #PDC-20, double crank gap frame press, 9.8" stroke, 19.6" Shut Height, 4.1" adj., 33 SPM, 94.4" x31.4" bed, air clutch & brake, #11475
Category: Gap Frame Double Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Aida
Model: PDC-20
(1) Used 220 Ton Aida Double Crank Gap Frame Press, Serial# 10620-0045, Capacity: 220 Ton, Stroke: 9.8, Adjustment: 4.1, Shut Height: 19.6 SDAU over bolster, Bed Size: 94.4 lr x 31.4 fb, Slide Area: 72 lr x 25.5 fb, Speed: 33 SPM, Air Clutch & Brake, Air Counter Balances, Dual Palm Buttons, Main Motor: 20 HP, (2) ...more
Gap Frame Single Crank Press Machines
16 Results
32 Ton, Minster #B1-32, high speed gap frame press, 1.5" stroke, 11" shut height, 2.25" adj., 24" x15" bed, air clutch & brake, 1967, #11256
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: B1-32
Year: 1967
(1) Used 32 Ton Minster High Speed Gap Frame Press, Capacity: 32 Ton, Stroke: 1.5, Slide Adjustment: 2.25, Shut Height Over Bed: 11: (SDAU), Bed Area: 24 L-R x 15 F-B, Speed: 500, Air Clutch & Brake, Palm Button Controls, Littell Crank Driven Roll Feeder, Approx. Weight: 7,000 lbs, 60 x 66 x 90 High, Capacity: 32 ...more
35 Ton, Stamtec #G1-35, single crank gap frame press, 2.76" stroke, 8.66"Shut Height, 2.17"adj., 40-120 SPM, 31.5"x15.75"bed, 1998
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Stamtec
Model: G1-35
Year: 1998
(1) Used 35 Ton Stamtec Model G1-35 Single Crank Gap Frame Press, Capacity: 35 Ton, Rating Point: 0.125" above bottom of stroke, Stroke: 2.76", Adjustment: 2.17", Die Height: 8.66", Bed Area: 31.50" lr x 15.75" fb, Slide Area: 14.17" lr x 9.84" fb, Speed: 40 - 120 spm, Capacity: 35 Ton, Rating Point: 0.125" above ...more
38 Ton, Aida #NC1-350, single crank gap frame press, 1.96" stroke, 8.26"Shut Height, 1.96"adj., 150 SPM, 28.74"x13.18"bed, 2010
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Aida
Model: NC1-350
Year: 2010
(1) Used 38 Ton Aida NC1-350 Single Crank Gap Frame Press, Capacity: 38 Ton, Blanking Capacity: 30 Ton, Stroke: 1.96", Adjustment: 1.96", Bed Area: 28.74" lr x 13.18" fb, Slide Area: 14.96" lr x 11.81" fb, Die Height: 8.26" over bolster sdau, Capacity: 38 Ton, Blanking Capacity: 30 Ton, Stroke: 1.96", Adjustment: ...more
38 Ton, Aida #NC1-350(1)E, single crank gap frame press, 1.9" stroke, 8.2"Shut Height, 1.9"adj., 90-150 SPM, 28.7"x13.1"bed, 2013
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Aida
Model: NC1-350E
Year: 2013
(1) Used 38 Ton Aida Model NC1-350(1)E Single Crank Gap Frame Press, Capacity: 38 TOn, Blanking Capacity: 30 Ton, Stroke: 1.9", Adjustment: 1.9", Die Height: 8.2" (sdau over bolster), Bed Area: 28.7" lr x 13.1" fb, Slide Area: 14.9" lr x 11.8" fb, Speed: 90 - 150 SPM, Main Motor: 5HP, Capacity: 38 TOn, Blanking ...more
39 Ton, Aida #NC1-35(1), single crank gap frame press, 1.96" stroke, 7.87"Shut Height, 1.96"adj., 90-200 SPM, 28.7"x13.1"bed, 1996
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Aida
Model: NC1-35
Year: 1996
(1) Used 39 Ton Aida Model NC1-35(1) Single Point Gap Frame Press, Capacity: 39 Ton, Blanking Capacity: 31 Ton, Stroke: 1.96", Adjustment: 1.96", Die Height: 7.87" (sdau over bolster), Bed Area: 28.7" lr x 13.1" fb, Slide Area: 4.9" lr x 11.8" fb, Speed: 90 - 200 SPM, Capacity: 39 Ton, Blanking Capacity: 31 Ton ...more
50 Ton, Aida #NC1-45, single crank gap frame press, 1.96" stroke, 8.66"Shut Height, 2.36"adj., 85-220 SPM, 31.88"x14.17"bed, 1997
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Aida
Model: NC1-45
Year: 1997
(1) Used 50 Ton Aida NC1-45 Single Crank Gap Frame Press, Capacity: 50 Ton, Blanking Capacity: 40 Ton, Stroke: 1.96", Adjustment: 2.36", Die Height: 8.66" over bolster sdau, Bed Area: 31.88" lr x 14.17" fb, Slide Area: 16.14" lr x 13.38" fb, Speed: 85 - 220 SPM, Capacity: 50 Ton, Blanking Capacity: 40 Ton, Stroke: ...more
50 Ton, Heller Sutherland #Mark-50, gap press, 4.3" stroke, 33" x17.3"bed, 1998, #10564
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Heller
Model: MARK-50
Year: 1998
Used Heller Sutherland MARK 50 OBI Gap Press, 50 Ton capacity, single crank, with cushion and Trabon lubrication. : 33"x17.3" bed, 4.3" stroke, 10.6" die height, variable speeds 50-85 SPM. 1988 model in used condition., Capacity: 50 Ton, Stroke: 4.3", Adjustment: 2.3, Die Height: 10.6", Bed Size: 33" x 17.3", Slide ...more
50 Ton, Heller Sutherland #Mark-50, gap press, 4.3" stroke, 33" x17.3"bed, 1998, #10563 (2 available)
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Heller
Model: MARK-50
Year: 1998
Used 1988 Heller Sutherland MARK 50 OBI/Gap Press. 50 Ton capacity, 33"x17.73" bed, 4.3" stroke, single crank. Variable speeds 50-85 SPM, 7.5 HP motor. Includes cushion and Trabon lubrication. Slide feeder not included. Ideal for industrial needs., Capacity: 50 Ton, Stroke: 4.3", Adjustment: 2.3, Die Height: 10.6" ...more
75 Ton, Clearing #TLR853, gap frame press, 5" stroke, 18.75"Shut Height, 3" adj., 36" x24" die bed
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Clearing
Model: TLR853
(1) Used 75 Ton Clearing TLR853 Gap Frame Press, Capacity of press: 75 tons, Stroke: 5, Adjustment of slide: 3, Shut height of slide: 18-3/4, Die bed: 36 x 24, Estimated Shipping Dimensions: L 90 x W 60 x H 133, Estimated weight: 20,000 - 30,000 LBS, Capacity of press: 75 tons, Stroke: 5, Adjustment of slide: 3, Shut ...more
75 Ton, Minster #OBS-7, fixewd base gap frame press, 4" stroke, 21" Shut Height, 3.5"adj., 45-90 SPM, 36" x24"bed, 1991
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: OBS-7
Year: 1991
Used 75 Ton Minster Model OBS-7 Gap Frame Press from 1991, featuring a 75T capacity, 36"x24" bed, 4" stroke, and air clutch. Runs at 45-90 SPM. Includes a 5 bolster plate and free-standing control console. Perfect for industrial needs., Tonnage: 75, Stroke: 4", Adjustment:3.50", Shut Height: 21", Bed Size: 36"LR x ...more
100 Ton, Goiti #CFR, single point gap frame press, 5.5" stroke,air clutch & brake, 1984, #10406
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Goiti
Model: CFR
Year: 1984
(1) Used 100 Ton Goiti Single Point Gap Frame Press, Serial Number: 84-429-51, Capacity: 100 Ton, Stroke: 5.5, Die Height: 11.2, Slide Adjustment: 3.54, Bed Area: 38LR x 24.5FB, Slide Area: 24LR x 18FB, Wintriss #WPC-1000 Clutch & Brake Control, Omron Safety Light Curtains, T Slotted Bolster, T-Slotted Ram ...more
121 Ton, Komatsu #OBS110-3, OBS press
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: OBS110-3
121 Ton Komatsu OBS Single Point Gap Press, Capacity: 121.25 Short Ton, Stroke: 5.91", Die Height: 14.96" Bolster to Slide (SDAU), Slide Adjustment: 3.9", Speed: 32-65 SPM, Bed Area: 33.1"L-R x 27.5"F-B, Slide Area: 23.6"L-R x 17.7"F-B, Capacity: 121.25 Short Ton, Stroke: 5.91", Die Height: 14.96" Bolster to Slide ...more
150 Ton, Bliss #C-150, geared single point gap frame press, 8" stroke, 22" Shut Height, 4.5"adj., 50" x30"bed
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: C-150
1985 BLISS C-150, 150 Ton OBI/Gap Frame Press. s a 50"x30" bed, 8" stroke, and adjustable speed of 30-60 SPM. Includes air clutch for reliable performance. Ideal for various industrial applications., Capacity: 150 Ton, Bed Area: 50" lr x 30" fb, Bolster Plate: 4.5" thick (t-slotted), Ram Area: 34" lr x 24" fb, Stroke: ...more
200 Ton, Bliss #C-200, gap frame press, 8" stroke, 24" Shut Height, 4.5"adj., 30-60 SPM, 1998
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: C-200
Year: 1998
(1) Used 200 Ton Bliss Model C-200 Single Point Gap Frame Press, Capacity: 200 Ton, Bed Area: 58" lr x 34" fb, Ram Area: 36" lr x 28" fb (T-slotted), Bolster: 58" lr x 34" fb x 5" thick (T-slotted), Stroke: 8", Slide Adj: 4.5" (Powered), Shut Height to Bed: 24" (Slide Down Adjustment Up over bed), Speed: 30 - 60 SPM ...more
220 Ton, Seyi #SN1-220, single pt gap frame press, 8.66" stroke, 17.72"die height, 4.33"adj., 25-55 SPM, WPC2000-S
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Seyi
Model: SN1-220
(1) Used 220 Ton Seyi SN1-220 Single Point Gap Frame Press, Serial#EW200-1561, Seyi WPC2000-S Control, Stroke: 8.66", Slide Adjustment: 4.33 (powered), Die Height: 17.72, Bolster Area: 55.12 lr x 33.07 fb, Bolster: 7 Thick, Slide Area: 33.86 lr x 25.59 fb, Speed: 25-55 SPM, 17.72" Die Height, Floor to Top of Bed: ...more
220 Ton, Stamtec #G1-200, single point gap frame press, 7.88" stroke, 17.73" die hght, 4.33" adj., 20-50 SPM, air clutch & brake, #11316
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Stamtec
Model: G1-200
Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die Height: 17.73, Speed: 20 - 50 SPM, Bed Area: 55 lr x 32 fb, Slide Area: 33 lr x 24 fb, Air Clutch and Brake, Air Counterbalance, Motorized Slide Adjustment, Overall height: 126, Catalog Weight: 46,000#, Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die ...more
Gun and Deep Hole Drilling Machines
1 Result
2" Tarus #TPTCGD512S, CNC gun drill, 144" X, 56" Y, 22" Z, 3000 RPM, #50, Mayfram chip conveyor, 2011
Category: Gun and Deep Hole Drilling Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Tarus
Model: TPTCGD512S
Year: 2011
(1) Used TARUS TPTCGD512S CNC Gun Drilling Machine, 2" Maximum Drilling Diameter, 8,000 RPM, 84" Stroke, Travels: X- 144", Y- 56", Z- 22", 60" x 144" Table Dimensions, CAT 50, 3,000 RPM Auxiliary Spindle, Coolant, Mayfram Magnetic Chip Conveyor, 2" Maximum Drilling Diameter, 8,000 RPM, 84" Stroke, Travels: X- 144", Y- ...more
1/2" x 72" Fata high speed shear, hydraulic clut, 50 HP, rake style, 1997, #8387
Category: Hi-speed Shears
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fata
Year: 1997
1997 FATA 84" x 1/2" High-Speed Shear available, offering impressive durability with a 50 HP motor, 1800 RPM. s include bow tie blades, 6 hold downs, single gear reduction, and adjustable gap clearance. Requires electrics/controls., Year: 1997, Capacity: 1/2 @ 84 Wide, 125 Yield (High Strength Material), Water Cooled ...more
High Speed and Automatic Presses
2 Results
30 Ton, Raster #30/700-SL-4S, high speed press, 700 SPM, 27.5"x17.5"bed, 1982
Category: High Speed and Automatic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Raster
Model: 30/700-SL-4S
Year: 1982
(1) Used 30 Ton Raster 30/700 SL-4S High Speed Press, 1982 RASTER 30/700 SL-4S, Ton. 40 T, Bed L-R. 27.5 in, Bed F-B. 17.5 in, Speed. 700 spm, 1982 RASTER 30/700 SL-4S, Ton. 40 T, Bed L-R. 27.5 in, Bed F-B. 17.5 in, Speed. 700 spm.
71 Ton, Minster #P2H-63-39, high speed press, 1.97" stroke, 2.95" adj., 400 SPM, 39.4" x 24.8" bed, Minster clutch & brake, 1998, #11623
Category: High Speed and Automatic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2H-63-39
Year: 1998
(1) Used 71 Ton Minster Model P2H-63-39 High Speed Press, Capacity: 71 Ton, Bolster & Ram Area: 39.4 l-r x 24.8 f-b, Bed Area: 40.25 lr x 33fb, Stroke: 1.97, Adjustment: 2.95, Speed: 400 SPM, Windows: 14 wide x 17 high, Livonia Magnetic Scrap Conveyor, Minster Clutch and Brake Control, ALL SUBJECT TO VERIFICATION ...more
Horizontal Band Saws
1 Result
Chen Long, double column horizontal band saw
Category: Horizontal Band Saws
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Chen Long
Chen Long 16"x24" Double Column Horizontal Band Saw available now. s a 24"x16" flat cutting capacity, 16" round and square capacity, power feed, power clamping, and powered exit table. a coolant tank and pump, 5.5 kW motor., Capacity:, Flat: 24" w x 16", Round: 16" Diameter, Square: 16" x 16", Power Feed (variable ...more
Hydraulic and Mechanical Forging Presses
2 Results
1000 Ton, National #Maxi-Press, forging press, 10" stroke, 32" x 45" bed, 75 SPM, 18" windows, Cieco PLC Plus Control, foot pedal, 1979
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: National
Model: MAXI-PRESS
Year: 1979
(1) Used 1000 Ton National Maxi Press, Capacity: 1000 Ton, Stroke: 10", Bed Area: 32" lr x 45" fb, Slide Area: 30" lr x 30" fb, Speed: 75 SPM, Capacity: 1000 Ton, Stroke: 10", Bed Area: 32" lr x 45" fb, Slide Area: 30" lr x 30" fb, Speed: 75 SPM.
2000 Ton, National #2000-Maxipress, 47.5" x 54" bed, 12" stroke, 58" adjustment, 35" shut height, 60 spm, 150 HP
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: National
Model: 2000-MAXIPRESS
Capacity: 2000 Ton, Speed: 60 SPM, Stroke: 12", Shut height: 35" Maximum, Wedge Adjustment: 5/8", Die Seat: 54" fb x 47.5" lr, Ram Face: 42" fb x 42" lr, Floor Space: 13'10" lr x 12'1" fb, Height Above Floor: 17'8.5", Motor HP: 150, Net Weight: 300,000#, Capacity: 2000 Ton, Speed: 60 SPM, Stroke: 12", Shut ...more
Hydraulic Hydroforming Press Machines
1 Result
2750 Ton, Cincinnati #25-10-12, hydroform press, 16" stroke, 29.75" DL, 1963
Category: Hydraulic Hydroforming Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cincinnati
Model: 25-10-12
Year: 1963
(1) Used 2750 Ton Cincinnati Hydroform Press, Max Tonnage: 2750, Max Stroke: 16, Rapid Advance: 1000 IPM, Rapid Return: 1000 IPM, Max Stripping Capacity: 35 Tons, Daylight: 29.75 (Stroke Up Tool Nest Removed), Max Pressing Speed: 55 IPM (0 - 1100 tons), Max Pressing Speed: 21 IPM (1100 - 2750 tons), 130 GPM, Max Blank ...more
138 Ton, Amada #HFB1253, hydraulic press brake, 10.2' OA, 106" between housing, 1997, #10327
Category: Hydraulic Press Brakes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Amada
Model: HFB1253
Year: 1997
(1) Used 138 Ton x 10 Amada CNC Hydraulic Press Brake, Serial Number: HFBO 125 30 H970518, Year: 1997, Capacity: 138 Ton, Overall Bed / Ram: 122, Distance Between Housings: 106, Stroke: 7.8, Open Height: 18.5, Closed Height: 10.7, Throat: 16.5, Distance Floor to Bed: 36, Operatuer CNC Controls, CNC Back Guage, 6 Axis ...more
230 Ton, Cincinnati #230CBX10, hydraulic press brake, 10' overall, 102" between housing, 10" stroke, Hurco Autobend 7 Back Gauge
Category: Hydraulic Press Brakes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cincinnati
Model: 230CBX10
(1) Used 230 Ton x 10' Cincinnati Model 230CBx10 Hydraulic Press Brake, Capacity: 230 Ton (Low and Medium Speed), Overall Bed: 12', Distance Between Housings: 10'6", Stroke: 10", Shut Height: 7", Open Height: 17", Throat: 8", Hurco Autobend 7 Back Gauge, ***Catalog ***, Capacity: 230 Ton (Low and Medium ...more
480 Ton, Baykal #APHS-4116x440, hydraulic press brake, 13' 5"OA, 140" between housing, 12.6"stroke, 19.7"throat, 23.2"DL, 2011
Category: Hydraulic Press Brakes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
2011 Baykal APHS 4116 x 440 Hydraulic Press Brake, 480 Ton, 13'5" Bed Length. s 140" between housings, 12.6" stroke, and 23.2" daylight opening. a 40 HP motor, overall dimensions 200"x90"x138". Weight approx. 60,000 lbs., MODEL: APHS 4116×440, CAPACITY: 13 5 X 480 TON, SERIAL NO.: 17729, OVERALL BENDING ...more
42 Ton, Neff, 4-Post, hydraulic press, 12" stroke, 24" daylight, 60" x60" bed, 15 HP, 1999, #11211
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Neff
Model: 11211
Year: 1999
(1) Used 42 Ton Neff 4 Post Hydraulic Press, Serial#11069, Capacity: 42.4 Ton, Stroke: 12, Daylight Opening: 24, Bed Area: 60 lr x 60 fb, Didtance Between Posts: 48 lr x 48 fb, Main Cylinder: 4 diameter, Guide Posts: 4 diameter, Main Motor: 15 HP, Approx Dimensions: 68 lr x 65 fb x 98 tall, Approx Weight: 10,000# ...more
50 Ton, Macrodyne #MPZ-50, 4-post hydraulic press, 20" stroke, 36" daylight, 72" x 30" bed, 16" Shut Height, Panelview 600 Control, 2008
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Macrodyne
Model: MPZ-50
Year: 2008
This 50 Ton Macrodyne Press is a 4 Post Down Acting Hydraulic Press, Top Mounted Hydraulics, 72"L-R x 30"F-B bed, 20" of Stroke with 30" of Daylight Opening. The press was built new in 2008., Pressing Force: 50 Ton, Maximum Return Force: 1.5 Ton, Usable Bed Size: 72"LR x 30" FB, Usable Slide Size: 72"LR x 30"FB ...more
176 Ton, Accurl #HPPx160T/16T, 4-post guided ram gap frame hydraulic press, 22" stroke, 44" daylight, 39" x25.5"bed, 2014
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Accurl
Model: HPPX160T/16T
Year: 2014
Used 176 Ton ACCURL 4 Post Hydraulic Press, model HPP x 160T / 16T, 2014. s include 22" stroke, 44" daylight, dual palm buttons, and touch screen. Bed 39"x25.5", robust speed, and T-slotted design. Ideal for dynamic industrial applications., Capacity: 176 US Tons, Return Force: 23 US Tons, Max Stroke: 22", Daylight ...more
176 Ton, Wanzke #176, hydraulic press, 10" stroke, 23" daylight, 43" x32" bed, Omron PLC
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: 176
(1) Used 176 Ton Wanzke Straight Side Hydraulic Press, Capacity: 176 US Ton, Bolster Area: 43" lr x 32" fb, Stroke: 10", Daylight Opening: 23", 16 Ton Hydraulic Cushion (2" Stroke), Omron PLC Control, Manuals and Schematics, In Plant Under Power, Capacity: 176 US Ton, Bolster Area: 43" lr x 32" fb, Stroke: 10" ...more
200 Ton, Pacific #200-D8-48-96, straight side hydraulic press, 24" stroke, 36" daylight, 1992, #8747
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 200-D8-48-96
Year: 1992
Serail Number: A963, Stroke: 24, Daylight: 36, Bed Size: 96LR x 48FB, Speeds: 335 IPM Rapid Advance, 0 - 35 IPM Pressing, 289 IPM Rapid Retract, Windows: 26 Wide, Hydraulic Die Cushion - Estimated @ 66 Ton / 34 x 34 Pad / 8 - 18 stroke, Programmable Cushion Control - for tonnage and height, Programmable Drawing ...more
200 Ton, Pacific #200-D8-48-96, straight side hydraulic press, 24" stroke, 36" daylight, 1995, #8745
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 200-D8-48-96
Year: 1995
(1) Used 200 Ton Pacific Straight Side Hydraulic Press, Serial number: A-1183, Capacity: 200 Tons, Stroke: 24, Daylight: 36, Bed Size: 96LR x 48FB, Speeds: 335 IPM Rapid Advance, 0 - 35 IPM Pressing, 289 IPM Rapid Retract, Windows: 26 Wide, Hydraulic Die Cushion - Estimated @ 66 Ton / 34 x 34 pad / 8 - 18 stroke ...more
320 Ton, Lauffer #RPN-320, down-acting hydraulic press, 14.5" stroke, 24.8" daylight, 1993, #10398
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Lauffer
Model: RPN-320
Year: 1993
Serial Number: 14515, Capacity: 320 Ton Pressing, Capacity: 39 Ton Retract, Stroke: 14.5, Daylight Opening: 24.8, Bed Area: 39 L-R x 31 F-B, Windows: 33 Wide, Speeds: 940 IPM Rapid Advance, 90 IPM Pressing, 800 IPM Return, Press Control Panel, Operator T-Stand, Hydraulic Power Pac Attached To Press, Approx: Overall ...more
400 Ton, Ph Hydraulics #HD2-4P-300-40, 12" stroke, 33" DLO, 81" x60" bed, Vickers pumps, 2000, #9998
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Ph Hydraulics
Model: HD2-4P-300-40
Year: 2000
(1) Used 400 Ton PH Model HD2-4P Four Post Hydraulic Press, Serial Number: 53018, Capacity: 400 Ton, Stroke: 12, Daylight Open: 33, Shut Height: 21, Bed Area: 81LR x 60FB, Distance Between Posts: 64LR x 40FB, Operating Speeds:, Rapid Advance: 340 IPM, Intermediate: 180 IPM, Pressing: 48 IPM, Rapid Return: 352 IPM ...more
1350 Ton, Pacific #1350D-10/80, hydraulic press, 48" stroke, 66" daylight, 120" x80"bed, 1650 gallon reservoir, w/ cushion, 2010
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 1350D-10/80
Year: 2010
For sale: Used 1350 Ton Pacific Model 1350 D-10/80 Straight Side Hydraulic Press, 2010. Includes cushion. : 1350 T, 120x80 in bed, 48 in stroke, 66 in daylight. s 2x125 HP motors, 1650-gallon reservoir, and more., Capacity:, Forming: 1350 Ton, Punching: 900 Ton, Stroke: 48", Daylight Opening: 66", Closed Height: 18" ...more
5000 Ton, Lake Erie, downacting hydraulic press, 48" stroke, 60" daylight, #9243
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Lake Erie
Serrial Number: 1678, Capacity: 5000 Tons, Stroke: 48, Daylight Opening: 60, Platen Area: 112 x 112, Bolster Area: 112LR x 48FB, Distance Between Posts: 78LR x 64FB, Diameter Of Ram: 67, Diameter of Posts: 18, Rubber Pad Fluid Forming Unit, Top Mounted Hydraulic Power Unit Including:, (1) 60 HP Oilgear Hydraulic Pump ...more
Fanuc, R-2000iB/210F, CNC Robot, 463 lb. payload, 104.53" horizontal reach, 6-Axis, R-30iA Control, refurbished 2009
Category: Industrial Robots
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fanuc
Model: R-2000IB/210F
(1) Refurbished Fanuc 6 Axis R-2000iB/210F CNC Robot, Number of Axis: 6, Payload: 210 kg, Horizontal Reach: 2655 mm, Pendant Control, Number of Axis: 6, Payload: 210 kg, Horizontal Reach: 2655 mm, Pendant Control.
Fanuc, S-420iF, 6-Axis robot, R-J2 controller, 120 kg payload
Category: Industrial Robots
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fanuc
Model: S-420IF
(1) Used Fanuc Model S-420iF 6-Axis Robot, Model: S-420iF, 6-Axis, Fanuc System R-J2 Controller, Payload: 120 Kg, Reach: 2850mm, Model: S-420iF, 6-Axis, Fanuc System R-J2 Controller, Payload: 120 Kg, Reach: 2850mm.
Fanuc, S-420iF, 6-Axis robot, R-J2 controller, 120 kg payload, floor mount
Category: Industrial Robots
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fanuc
Model: S-420IF
(1) Used Fanuc Model S-420iF 6-Axis Robot, Model: S-420iF, 6-Axis, Fanuc RJ-2 Controller, Payload: 120 Kg, Reach: 2850mm, Floor Mount, Model: S-420iF, 6-Axis, Fanuc RJ-2 Controller, Payload: 120 Kg, Reach: 2850mm, Floor Mount.
5" x 5" x 3/8" Iron Crafter #HMW70-70, ironworker, 70 ton, 15" throat, hand lever Control, #10270
Category: Ironworkers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Iron Crafter
Model: HMW70-70
Catalog - Subject to Verification By Buyer, Punch Station, Capacity: 70 Ton, Throat Depth: 15, Open Height (Less Tooling): 11 3/4, Shut Height (Less Tooling): 7 3/4, Stroke: 4, Stroke Rate: 60 1/2 Inch Strokes / Minute, Maximum Material Thickness: 11/16, Maximum Hole Diamtere @ Max. Thickness: 1 1/4, Punch Style: M40 ...more
Knuckle Joint Press Machines
1 Result
400 Ton, Bliss #663-A, knuckle joint press, 10" stroke, 19.5" Shut Height,.5" adj., 18 SPM, 30.5" x30.5" bed, 1955, #11471
Category: Knuckle Joint Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: 663-A
Year: 1955
Serial# T35341, Capacity: 400 Ton, Bed Area: 30.5 x 30.5, Ram Area: 25.5 lr x 21 fb, Approx 4 thick bolster, Stroke: 10, Shut Height: 19.5 over bed, Adjustment: 1/2, Speed: 18 SPM, Dual Palm Buttons, Inch / Single Stroke Mode, Serial# T35341, Capacity: 400 Ton, Bed Area: 30.5 x 30.5, Ram Area: 25.5 lr x 21 fb, Approx ...more
Laser Welding Machines
1 Result
Rofin-Sinar #880-HF, laser welder, 2000
Category: Laser Welding Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rofin
Model: 880-HF
Year: 2000
(1) Used Rofin-Sinar Model 880-HF Laser Welder, 2000 ROFIN-SINAR RS880HF3-34, 2000 ROFIN-SINAR RS880HF3-34.
Material Handling Equipment
1 Result
Linear #LTS-1000W, Drive End Transfer System, 18" Pitch, 8" Grip, 6" Lift, 4" x 4" Transfer Bar, 2000
Category: Material Handling Equipment
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Linear
Model: LTS-1000W
Year: 2000
(1) Used Linear JB2-Drive End Transfer System, ASKING PRICE $10,000.00 AS IS., Linear Transfer System, Model: JB2-Drive End, Year: 2000, s/n: 00-00202, LTS-1000W, Max. Transfer Pitch: 18, Max. Transfer Grip: 8 (Pending final design & engineering), Max. Transfer Lift: 6, Transfer Bar: 4 x 4 (Aluminum), ASKING PRICE ...more
90 Ton, Chicago #68-L, mechanical press brake, 8' overall, 72" between housing, 3" stroke, 1955, #9796
Category: Mechanical Press Brakes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Chicago
Model: -68-L
Year: 1955
(1) Used 60 Ton Chicago Dries & Krump Mechanical Press Brake, Serial Number: L-10093, Capacity: 60 Ton, Stroke: 3, Adjustment: 4, Die Space: 12, Overall Bed & Ram: 96, Between Housings: 72, Throat: 8, Air Operated Mechanical Clutch, Electrics, Approximate Weight: 11,500#, Serial Number: L-10093, Capacity: 60 ...more
.102" x 9.84" x 9.84" Amada #CWS-250, 11 ton, hydraulic notcher, 1986, #10567
Category: Notching Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Amada
Model: CWS-250
Year: 1986
(1) Used Amada Model CWS-250 10 Gauge Hydraulic Notcher, Serial#25000842, Capacity (Mild Steel):10 Ga., Max. Cutting Length:9.84" x 9.84", Tonnage:11, Stroke Length:0.94", Oil Tank Capacity:14.5 Gallons, Strokes Per Minute:42, Serial#25000842, Capacity (Mild Steel):10 Ga., Max. Cutting Length:9.84" x 9.84" ...more
6000 lb. Coilmate #CM6048, motorized pallet decoiler, 48" outside dimension, loop Control, 1995
Category: Pallet Decoilers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coilmate
Model: CM6048
Year: 1995
Used Coil Mate CM6048 Motorized Pallet Decoiler available. 1995 model in good condition, offering a 6,000 lb weight capacity and 48" max coil diameter with loop control. Ideal for efficient uncoiling operations., Max Coil Weight: 6,000#, Max Coil Diameter: 48", Loop Control, Max Coil Weight: 6,000#, Max Coil Diameter: ...more
4011 psi Nazel #4B, pneumatic forging hammer, 15 HP motor, 2020
Category: Power Hammers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Nazel
Model: 4B
Year: 2020
(1) Used Nazel Model 4B Forging Hammer, Capacity: 4011# per square inch, 15 HP Motor, Foot treadle operation, The Hammer has been rebuilt., Press Weight: 11,000#, Anvil Weight: 4,000#, Remanufactured: 2020, The hammer has all New valves, New leather wipers on the ram, New wrist pin and bearings on the piston that ...more
Power Squaring Shears (Inch)
5 Results
1/4" x 10' Amada #M3060, mechanical power squaring shear, 60 SPM, 39" FOPPBG, front squaring arm, (2) 32" front extension arms, (13) holddowns, 1998
Category: Power Squaring Shears (Inch)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Amada
Model: M3060
Year: 1998
(1) Used 10 x 1/4 Amada Model M3060 Mechanical Power Squaring Shear w/ FOPPBG, s/n: 30601111, Max Thickness Capacity: 0.235, Max Cutting Length: 120.8, Blade Length: 133, Distance Between Housings: 124, Gap Depth: 11.81, Rake Angle: 128, Strokes Per Minute: 60 SPM, Front squaring arm, (2) 32 front extension arms, (13) ...more
3/8" x 10' Accurshear #837510, hydraulic shear, 10 holddown, 8' squaring arm, 1984, #11529
Category: Power Squaring Shears (Inch)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Accurshear
Model: 837510
Year: 1984
(1) Used 10 x 3/8 Accurshear Hydraulic Shear, Capacity Inches 3/8, Length Feet 10, Knife Size Inches 1 x 3, Knife Length Inches- 124, Number of Hold Downs 10, Hold Down Tonnage - 12, Cycles per minute Full stroke 11 / Short Stroke 40, Motor H.P. 30, Squaring Arm 8, Capacity Inches 3/8, Length Feet 10, Knife Size ...more
3/8" x 16' Pacific #300G16, hydraulic shear, front operated power back gauge, 1986
Category: Power Squaring Shears (Inch)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 300G16
Year: 1986
(1) Used 16 x 3/8 Pacific Hydraulic Shear, Capacity: 3/8 x 16 Mild Steel, Cutting Length: 16, Distance Between Housings: 163, Table height above floor: 32.75, Tabel Width: 28.5, Knife Size: 1 x 4, Hold Down Tonnage: 25, Motor HP: 20, Approximate Dimensions: 179 L-R x 76 F-B x 94 Tall, Approximate Weight: 46,000 Lbs ...more
1/2" x 10' Durma #SB-3013, hydraulic shear, 5.1" stroke, 10 SPM, Durma ENC100M, front operated power back gauge, 2007
Category: Power Squaring Shears (Inch)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Durma
Model: SB-3013
Year: 2007
(1) Used 10' x 1/2" Durma Hydraulic Shear, 122" CUTTING LENGTH, 1/2" CUTTING CAPACITY (MILD STEEL), 5.1" MAX STROKE LENGTH, 10 SPM, HOLD DOWNS, SQUARING ARM, FRONT ARM SUPPORTS, DURMA ENC 100M PROGRAMABLE BACKGAGE, 40 HP 3PH 60 HZ 230 460, 13.5' X 10.7' X 7.4' T APROX, 27,500 LBS APROX, 122" CUTTING ...more
1/2" x 10' Wysong #1050, Mechanical Shear, 18 hold downs, AS-IS
Category: Power Squaring Shears (Inch)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Wysong
Model: 1050
(1) Used 10' x 1/2" Wysong Mechanical Shear, Mechanical, Capacity: 10' x 1/2", Back Gauge - Requires Repair, (18) Holddowns, Mechanical, Capacity: 10' x 1/2", Back Gauge - Requires Repair, (18) Holddowns.
Precision Roller Levelers
1 Result
10.3" x .197" Kohler #KRM-50.260/21T, CNC tandem leveling line, (21) 1.97" diameter straightener rolls, Siemens Control, 2000
Category: Precision Roller Levelers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Kohler
Model: KRM-50.260/21T
Year: 2000
Year: 2000, Serial Number: (100373), Capacity: 10.3 x.197 (Maximum), 10.3 x.020 (Minimum), Diameter of Straightening Rolls: 1.97, Number of Straightening Rolls: 21, Number of Turning Station Rolls: 54, Adjustable Upper Straightener Rolls, Feed Rate (Variable): 1.7 - 131 FPM, All Straightening Rolls are Powered, All ...more
Press Accessories and Parts
3 Results
10.3" x 8.3" x 3.88" Vibro / Dynamics #9L180, isolators, #11674
Category: Press Accessories and Parts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: 10.3 X 8.3 X 3.88 VIBRO / DYNAMICS #9L180
Catalog - Subject to Verification, Model: 9L180, Length: 10.3, Width: 8.3, Height: 3.13 Min. - 3.88 Max., Weight: 31 lbs, Catalog - Subject to Verification, Model: 9L180, Length: 10.3, Width: 8.3, Height: 3.13 Min. - 3.88 Max., Weight: 31 lbs.
20.5" x 14.5" Vibro Dynamics #Series-20, (4) isolation pads, #11673
Category: Press Accessories and Parts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: 20.5 X 14.5 VIBRO DYNAMICS #SERIES-20
(4) Used 20.5" x 14.5" Isolation Pads, (4) Isolation Pads, Possibly Vibro/Dynamics Series 20, Length: 20.5, Width: 14.5, 1.25 bolt diameter, 5 bolt length above top of mount, (4) Isolation Pads, Possibly Vibro/Dynamics Series 20, Length: 20.5, Width: 14.5, 1.25 bolt diameter, 5 bolt length above top of mount.
Vibro/Dynamic #10M1200, press isolator mounts (4 available)
Category: Press Accessories and Parts
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: VIBRO/DYNAMIC #10M1200
(4) Used Vibro/Dynamic Press Isolator Mounts Model 10M1200, Set of (4) Vibro Dynamics press isolator mounts, Set of (4) Vibro Dynamics press isolator mounts.
Jet #700DS, radial drill, equipment and tools, 1981
Category: Radial Drills
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Jet
Model: 700DS
Year: 1981
1981 JET EQUIPMEN AND TOOLS 700DS, 1981 JET EQUIPMEN AND TOOLS 700DS.
9 Stand, Dahlstrom, 2" dia.spindle, 30" roll space, air clutch, 30 HP, used, #7840
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dahlstrom
Spindles: 9, Spindle Diameter: 2, Roll Space: 30, Horizontal Centers: 24, Vertical adjustment: 5.5 - 9, Top of Base to Center of Bottom Spindle: 8 1/4, (1) Extra Spindle Box & Shafts, Air Clutch, Main Drive Motor (30 HP), Push Button Controls, AMS #MP-300 Series Length Console Control, Approximate Dimensions: 21 L ...more
10 Stand, Ardcor #1-1/2, rollformer, 1.5" spindle diameter, 10" rollspace, 5.5"-8.5" vertical centers, rebuilt 2023
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Ardcor
Model: 1-1/2
(1) 10 Stand x 10" Roll Space x 1.5" Ardcor Roll Space Rollformer - Fully Rebuilt in 2023, Stands: 10, Roll Space: 10", Spindle Diameter: 1.5", Vertical Adjustment: 5.5" to 8.5", Base to Center of Bottom Spindle: 5.75", New 20 HP Motor & Drive in 2023, 240 Volt, Stands: 10, Roll Space: 10", Spindle Diameter: 1.5" ...more
10 Stand, RLM, rollformer, 1.5" spindle diameter, 12" rollspace, 12" horizontal centers, 7" vertical centers, 2003
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Year: 2003
(1) Used 10 Stand x 1-1/2" RLM Rollformer, Year:2001, Stands: 10, Spindle Diameter: 1-1/2", Roll Space: 12", Horizontal Centers: 12", Vertical Adjustment: 4"-7", Table to Center Bottom Spindle: 5-1/2", Year:2001, Stands: 10, Spindle Diameter: 1-1/2", Roll Space: 12", Horizontal Centers: 12", Vertical Adjustment: ...more
10 Stand, Tishken #10MW2, 2" spindle diameter, 10" roll space, 12" horizontal centers, #10671
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Tishken
Model: 10MW2
(1) Used 10 Stand Tishken Model 10MW-2 Rollformer, 10 Stands, 2" Spindle Diameter, 10" Roll Space, 12" Horizontal Centers, 5.5 - 7.5 Vertical Adjustment, 5 Table to Center of Bottom Spindle, Right to Left, Missing 2 Outboards, 10 Stands, 2" Spindle Diameter, 10" Roll Space, 12" Horizontal Centers, 5.5 - 7.5 Vertical ...more
20 Stand, RLM #RLM-FPE-3, rollformer, 3" spindle diameter, 20" roll space, 24" horizontal centers, 6-1/2"-12" vertical adj., 2025
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Model: RLM-FPE-3
Year: 2025
Rebuilt 20 Stand RLM Rollformer offers a 3" spindle diameter, 20" roll space, and 24" horizontal centers. a 50 HP motor and complete mechanical parts, this model is ideal for your rollforming needs., Rebuilt in 2026, NOTE: This is a 20 Stand Machine. We can build a machine with additional stands - P.O.R., 20 Stand - ...more
24 Stand, Tishken #24-HWAS-3, rollformer, 3" spindle diameter, 40" adj. rollspace, 6-1/2"- 8-3/8" vertical adj., 14" horizontal centers, 39" passline, 1991
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Tishken
Model: 24-HWAS-3
Year: 1991
Serial Number: (20679-1091), Number of Stands: 24 (Two 12 Stand Bases), Spindle Diameter: 3”, Roll Space: 30” - 40” (Powered Adjustment), Gearing: Unequal 1.3 to 1, Vertical Adjustment: 6 1/2” to 8 3/8”, Horizontal Center: 14”, Passline Height: 39” (Approximately), Right to ...more
64 Stand, RLM rollformer, 3" spindle diameter, 20"-24" spindle, gearboxes & outboards stands
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Spindle Diameter: 3”, Roll Space: 20”-24", Vertical Adjustment: 6.5” - 12”, Table to Center of Bottom Spindle: 9 3/4”, (64) Total Stands including., - (51) Stands, top and bottom spindles driven., - (10) Stands, bottom spindle driven, compatible for gear linkage to drive top spindle., - ...more
Rotary Screw Air Compressors (Positive Displacement)
1 Result
250 cfm, 100/110 psig, Sullair #LS-12-50L-ACAC, 50 HP, air cooled, 1995
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Sullair
Model: LS-12-50L-ACAC
Year: 1995
(1) Used 50 HP Sullair Screw Type Air Compressor, 50 HP, Maax Air Pressure Rated: 100 - 110 PSIG, Max CFM: 250, Air Cooled, 27,588 hours, 50 HP, Maax Air Pressure Rated: 100 - 110 PSIG, Max CFM: 250, Air Cooled, 27,588 hours.
Scale Systems #675, precision counting scale
Category: Scales
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Scale Systems
Model: 675
(1) Used Scale Systems Model 675 Precision Counting Scale, SCALE SYSTEMS Model 675, SCALE SYSTEMS Model 675.
Screw Type Injection Molding Machine
10 Results
85 Ton, 5 oz., Van Dorn #85-HT-5F, horizontal injection molding machine, 13" x16" tie bar spacing, 22" DL, 15 HP, 1995
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 85-HT-5F
Year: 1995
(1) Used 85 Ton Van Dorn Model 85-HT-5F Injection Molding Machine - Year:1995, Capacity: 85 Ton, Shot Size: 5 oz, Platen Area: 21"x23", Tie Bar Spacing: 13"x16", Daylight Opening: 22", Motor: 15 HP, Capacity: 85 Ton, Shot Size: 5 oz, Platen Area: 21"x23", Tie Bar Spacing: 13"x16", Daylight Opening: 22", Motor: 15 HP.
85 Ton, 5 oz., Van Dorn #85HT5, horizontal injection molding machine, 13" x16" tie bar spacing, 20" DL, 1996
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 85HT5
Year: 1996
(1) Used 85 Ton Van Dorn Model 85HT5 Injection Molding Machine - Year: 1996, Capacity: 85 Ton, Shot Size: 5 oz., Platen Area: 22"x23", Tie Bar Spacing: 13"x16", Daylight Opening: 20", Capacity: 85 Ton, Shot Size: 5 oz., Platen Area: 22"x23", Tie Bar Spacing: 13"x16", Daylight Opening: 20".
120 Ton, 8 oz., Van Dorn #120-HT-8F, horizontal injection molding machine, 17" x17" tie bar spacing, 19" DL, 20 HP, Pathfinder 2500 Control, 1994
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 120-HT-8F
Year: 1994
(1) Used 120 Ton Van Dorn Model 120-HT-8F Injection Molding Machine - Year: 1994, Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17", Daylight Opening: 19", Pathfinder 2500 Controls, Motor: 20 HP, Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17" ...more
120 Ton, 8 oz., Van Dorn #120-HT-8F, horizontal injection molding machine, 25" x24" tie bar spacing, 19" DL, 20 HP, Pathfinder 2500 Control, 1995
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 120-HT-8F
Year: 1995
(1) Used 120 Ton Van Dorn Model 120-HT-8F Injection Molding Machine - Year: 1995, Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17", Daylight Opening: 19", Pathfinder 2500 Controls, Motor: 20 HP, Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17" ...more
170 Ton, 12 oz., Van Dorn #170HT720, injection molding machine, 20" x20"tie bar, 28" DL, Pathfinder 3000, 1998
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 170HT720
Year: 1998
(1) Used 170 Ton Van Dorn Model 170HT720 Injection Molding Machine - Year: 1998, Capacity: 170 Ton, Shot Size: 12 oz., Platen Size: 31"x28", Tie Bar Spacing: 20"x20", Daylight Opening: 28", Pathfinder 3000 Controls, Capacity: 170 Ton, Shot Size: 12 oz., Platen Size: 31"x28", Tie Bar Spacing: 20"x20", Daylight Opening: ...more
300 Ton, 30 oz., Van Dorn #300HT30, injection molding machine, 25" x 25" tie bar, 38" daylight, Pathfinder 2500 Control, 1997
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 300HT30
Year: 1997
(1) Used 300 Ton Van Dorn Model 300HT30 Injection Molding Machine, Capacity: 300 Ton, Shot Size: 30 oz, Platen Size: 39"x41", Between Tie Bars: 25"x25", Daylight Opening 38", Pathfinder 2500 Controls, Motor: 50 HP, Capacity: 300 Ton, Shot Size: 30 oz, Platen Size: 39"x41", Between Tie Bars: 25"x25", Daylight Opening ...more
300 Ton, 30 oz., Van Dorn #300HT30, injection molding machine, 25" x25"tie bar, 38" DL, Pathfinder 3000, 1998
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 300HT30
Year: 1998
(1) Used 300 Ton Van Dorn Model 300HT30 Injection Molding Machine, Capacity: 300 Ton, Shot Size: 30 oz, Platen Size: 39"x41", Between Tie Bars: 25"x25", Daylight Opening: 38", Pathfinder 3000 Controls, Sepro-Robotique Success 22 Robot, Capacity: 300 Ton, Shot Size: 30 oz, Platen Size: 39"x41", Between Tie Bars: ...more
300 Ton, Van Dorn #300-RS-30F, injection molding machine, 25" x25"tie bar, 37" DL
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 300-RS-30F
(1) Used 300 Ton Van Dorn Model 300-RS-30F Injection Molding Machine, Capacity: 300 Ton, Shot Size: 30 oz., Platen Area: 39"x37", Tie Bar Spacing: 25"x25", Daylight Opening: 37", Capacity: 300 Ton, Shot Size: 30 oz., Platen Area: 39"x37", Tie Bar Spacing: 25"x25", Daylight Opening: 37".
500 Ton, 80 oz., Van Dorn #500HT80, plastic injection molding machine, 33" x32"tie bar, 40" DL, Pathfinder 3000, 1997
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 500HT80
Year: 1997
(1) Used 500 Ton Van Dorn Model 500HT80 Plastic Injection Molding Machine, Capacity: 500 Ton, Shot Size: 80 oz, Platen Size: 50"x53", Tie Bar Spacing: 33"x32", Daylight Opening: 40", Pathfinder 3000, Capacity: 500 Ton, Shot Size: 80 oz, Platen Size: 50"x53", Tie Bar Spacing: 33"x32", Daylight Opening: 40", Pathfinder ...more
Battenfield #BA-250/50-CDC, horizontal injection molding machine, 11" x10.5" tie bar spacing, 1998
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: BA-250/50-CDC
Year: 1998
(1) Battenfield Model BA 250/50 CDC Injection Molding Machine - Year: 1998, Platen Area: 17"x14", Tie Bar Spacing: 11"x10.5", Platen Area: 17"x14", Tie Bar Spacing: 11"x10.5".
6" x .125" CWP #SMIII06, servo feeder, ServoMatic III, pilot release, cascade rolls, press mounted, #11066
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cwp
Model: SMIII06
Max Material Width: 6, Material Thickness:.020 -.125, Feed Length: 0 - 999.999, ServoMatic III Control, Pilot Release, Cascade Rolls, Press Mounted, Currently Wired: 115/1/60, Approx Dimensions: 24 x 24 x 24, Max Material Width: 6, Material Thickness:.020 -.125, Feed Length: 0 - 999.999, ServoMatic III Control, Pilot ...more
8" x .125" Minster #MEF2-CS-8S, press mounted servo feed, 2006
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: MEF2-CS-8S
Year: 2006
(1) Used 8" Minster Model MEF2-CS-8S Press Mounted Servo Feed, Model: MEF2-CS-8S, Year: 2006, S/N: 18-51249, Max. Coil Width: 8", Material Thickness:.010"-.125" @ 8" Wide, Mild Steel 50,000 PSI Yield, Press Mounted, Model: MEF2-CS-8S, Year: 2006, S/N: 18-51249, Max. Coil Width: 8", Material Thickness:.010"-.125" @ 8" ...more
12" x .138" PA Industries #SRF-12, press mounted servo feeder
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pa Industries
Model: SRF-12
12" wide x.138" thick P/A Industries Advantage Press Mounted Servo Feeder, Max Coil Width: 11.8", Max Coil Thickness:.138" at full width, Pulling Power Peak / Cont: 584 / 201 Ft/lbs, Max Coil Width: 11.8", Max Coil Thickness:.138" at full width, Pulling Power Peak / Cont: 584 / 201 Ft/lbs.
18" x .25" Press Room Equipment #P450F18-A-HC, servo feeder
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Press Room Equipment
Model: P450F18-A-HC
(1) Used 18 wide x.170 thick PRE - Press Room Equipment Servo Feeder, 18" Maximum Width,.170" Thickness Capacity, 0 - 999.99 Feed lengths, Pendant For Jogging, Press Mounted, Pilot Release, Indramat CLM Control, 480/3/60, 18" Maximum Width,.170" Thickness Capacity, 0 - 999.99 Feed lengths, Pendant For Jogging, Press ...more
20" Minster #MEF4-20, cabinet mounted servo feeder, 480 V., 3-phase
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: MEF4-20
(1) Used 20 x.125" thick Minster MEF4-20S Cabinet Mounted Servo Feeder, 20" Maximum Width,.020" -.125" Thickness Capacity,.187" @ 10" wide,.250" @ 5.53" wide, Pilot Release, 0 - 999.99 Feed Lengths, Pendant For Jogging, Adjustable Height Cabinet, * Missing Drive, Approx Dimensions:, 5' LR X 5' FB X 6" Tall ...more
36" x .082" Perfecto #500-36, servo feed line, 10000 lbs., (7) 5" dia. roll, 2007, #11006
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Perfecto
Model: 500-36
Year: 2007
(1) Used 10,000# x 36 wide x.082 thick Perfecto Complete Servo Feed Line, Perfecto Press Mounted Servo Feeder, Model: 500-36, Max Width: 36, Thickness Range:.021 -.082, Feed Roll Diameter: 5, Speed: 800 IPM, Thread Table, Prefecto 7 Roll Straightener, Model: 28-36-7, Max Width: 36, Thickness Range:.021 -.082 ...more
48" x .062" Dallas #DRFE-448, cabinet style, servo feeder, 1999, #10904
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dallas
Model: DRFE-448
Year: 1999
(1) Used 48 x.062 Dallas Cabinet Style Servo Feeder, Dallas Model DRFE-448 Servo Feeder, S/N: 20895, Year: 1999, Cabinet Style, Feed Roll: 4 Diameter x 48 Wide, Material Capacity:.062 @ 48 Wide /.125 @ 18 Wide, Dallas Model DRFE-448 Servo Feeder, S/N: 20895, Year: 1999, Cabinet Style, Feed Roll: 4 Diameter x 48 Wide ...more
32" Shear Die
Category: Shear Blades
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) 32" Shear Die, 32" Shear Die, 32" Shear Die.
Single Crank OBI Flywheel Press Machines
24 Results
22 Ton, Bliss #M-22, OBI flywheel press, 2" stroke, 10" Shut Height, 2.25"adj., 23.5"x14.5"bed
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: M-22
(1) Used 22 Ton Bliss Model 22 OBI Flywheel Press, Serial#, Capacity: Ton, Stroke: 2, Adjustment:2.25, Shut Height on Bed: 10, Bed Area: 23.5 lr x 14.5 fb, Ram Area: 10 lr x 8.5 fb, Serial#, Capacity: Ton, Stroke: 2, Adjustment:2.25, Shut Height on Bed: 10, Bed Area: 23.5 lr x 14.5 fb, Ram Area: 10 lr x 8.5 fb.
22 Ton, Niagara #M-22, OBI flywheel press, 1.5" stroke, 9" Shut Height, 2" adj., 20" x12"bed
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Niagara
Model: M-22
(1) Used 22 Ton Niagara Model M-22 OBI Flywheel Press, Serial#, Capacity: 22 Ton, Stroke: 1.5, Adjustment: 2, Shut Height: 9, Bed Area: 20 lr x 12 fb, Serial#, Capacity: 22 Ton, Stroke: 1.5, Adjustment: 2, Shut Height: 9, Bed Area: 20 lr x 12 fb.
25 Ton, Rousselle #3F, flywheel single crank OBI press, 2" stroke, 10.75" Shut Height, 2" adj., 135 SPM, 20" x14"bed, air clutch, 2025
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 3F
Year: 2025
Remanufactured 25 Ton Rousselle Model 3F OBI Press. Key s: 20"x14" bed, 2" stroke, 10.75" shut height, 135 strokes/min, air clutch, Link 5100 MPC control, automatic oil, dual palm buttons. Options: pedestal stand, isolation mounts available., Capacity: 25 Ton, Stroke: 2", Adjustment: 2", Shut Height: 10.75" over bed ...more
40 Ton, Rousselle #4F, flywheel single crank OBI press, 3" stroke, 12" Shut Height, 3.5"adj., 105 SPM, 26" x16"bed, air clutch, 2025
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 4F
Year: 2025
Remanufactured 40 Ton Rousselle Model 4F Flywheel Single Crank OBI Press, used condition, offers 105 strokes/min, 40-ton capacity, and advanced press control. s a 26" x 16" bed, air clutch, and more. Ready to ship, ideal for your pressing needs., IN STOCK READY TO SHIP, Capacity: 40 Ton, Stroke: 3", Adjustment: 3.5" ...more
45 Ton, Bliss #C-45, OBI flywheel press, 4" stroke, 11.25" Shut Height, 3" adj., 29.5"x18"bed, light curtains
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: C-45
(1) Used 45 Ton Bliss C-45 OBI Flywheel Press, Serial#HP-51248/H-67807, Capacity: 45 Ton, Stroke: 4, Adjustment: 3, Shut Height: 11.25, Bed Area: 29.5 lr x 18 fb, Light Curtains, Approx Weight: 8,000#, Serial#HP-51248/H-67807, Capacity: 45 Ton, Stroke: 4, Adjustment: 3, Shut Height: 11.25, Bed Area: 29.5 lr x 18 fb ...more
45 Ton, Minster #5, OBI press, 3" stroke, 18" Shut Height, 2.5"adj, 28" x18"bed, 180 SPM, 1988, #10683
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: -5
Year: 1988
(1) Used 45 Ton Minster #5 SS Gap Frame Fixed Base Press, Serial Number: 27229, Capacity: 45 Tons, Stroke: 3, Shut Height: 12.75, Slide Adjustment: 2.5, Bed area: 28 x 18, Speeds: 45-90 SPM, AC Tech Vari Speed Drive, Motor & Controls, Inch / Single / Continuous, Wintress DiPro 1500, Serial Number: 27229, Capacity: ...more
45 Ton, South Bend Johnson #45-FW-AC, single crank flywheel OBI press, 3" stroke, 11.25" Shut Height, 2.5"adj., 125 SPM, 28" x18"bed
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: South Bend
Model: 45-FW-AC
(1) Used 45 Ton South Bend Johnson 45 FW AC Single Crank Flywheel OBI Press, Serial#73055, Capacity: 45 Ton, Stroke: 3, Adjustment: 2.5, Bed Size: 28 lr x 18 fb, Ram Size: 11 3/8 lr x 11 13/16 fb, Shut Height: 11.25, Speed: 125 SPM, Serial#73055, Capacity: 45 Ton, Stroke: 3, Adjustment: 2.5, Bed Size: 28 lr x 18 fb ...more
46 Ton, Federal #4, single crank flywheel OBI press, 4" stroke, 8.75" Shut Height, 2" adj., 8" throat, 105 SPM, 27" x14.75"bed, 1983
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 4
Year: 1983
(1) Used 46 Ton Federal #4 Single Crank Flywheel OBI Press, Serial#4-473, Capacity: 46 Ton, Stroke: 4, Adjustment: 2, Bed Size: 27 lr x 14.75 fb, Ram Size: 12 lr x 9 fb, Shut Height: 8.75, Speed: 105 SPM, Throat Depth: 8, Serial#4-473, Capacity: 46 Ton, Stroke: 4, Adjustment: 2, Bed Size: 27 lr x 14.75 fb, Ram Size: ...more
46 Ton, Federal #RB-206, single crank flywheel OBI press, 3" stroke, 10.25" Shut Height, 2.5"adj., 8" throat, 120 SPM, 27" x14.75" bed, Wintriss WPC 2000 air clutch & brake, reman. 1993
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: RB-206
(1) Used 46 Ton Federal RB-206 Single Crank Flywheel OBI Press, Remanufactured: 4/1993, Serial#4A2148, Capacity: 46 Ton, Stroke: 3, Adjustment: 2.5, Bed Size: 27 lr x 14.75 fb, Shut Height: 10.25, Speed: 120 SPM, Throat Depth: 8, Wintriss WPC 2000 Clutch/Brake Control, Dual Palm Buttons, Shadow 9 Light Curtains ...more
55 Ton, Rousselle #G1-55, single crank flywheel gap frame press, 3" stroke, 13" Shut Height, 4" adj., 28" x18"bed, 120 SPM, 1995
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: G1-55
Year: 1995
(1) Used 55 Ton Rousselle Single Crank Flywheel Gap Frame Press, Capacity: 55 Ton, Stroke Length: 3", Adjustment: 4", Shut Height: 13" (SDAU over bed), Bed Area: 28" lr x 18" fb, Bolster Thickness: 3, Die Shank Hole: 2", Speed: 120 SPM, Capacity: 55 Ton, Stroke Length: 3", Adjustment: 4", Shut Height: 13" (SDAU over ...more
60 Ton, Federal #5, single crank flywheel OBI press, 4" stroke, 12.25" Shut Height, 2.5"adj., 10" throat, 90 SPM, 29.5"x18.5"bed, 1988
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 5
Year: 1988
(1) Used 60 Ton Federal #5 Single Crank Flywheel OBI Press, Serial#5A-1950, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 29.5 lr x 18.5 fb, Ram Size: 14 lr x 10 fb, Shut Height: 12.25, Speed: 90 SPM, Throat Depth: 10, Serial#5A-1950, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 29.5 lr x 18.5 fb ...more
60 Ton, Federal #5, single crank flywheel OBI press, 4" stroke, 12.5" Shut Height, 2.5"adj., 10" throat, 90 SPM, 29.5"x18.5"bed, 1970
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 5
Year: 1970
(1) Used 60 Ton Federal #5 Single Crank Flywheel OBI Press, Serial#5A-1950, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 29.5 lr x 18.5 fb, Ram Size: 16 lr x 10 fb, Shut Height: 12.5, Speed: 90 SPM, Throat Depth: 10, Serial#5A-1950, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 29.5 lr x 18.5 fb ...more
60 Ton, Federal #5A, single crank flywheel OBI press, 4" stroke, 10.25" Shut Height, 2.5"adj., 10" throat, 90 SPM, 29.5"x18.5"bed, reman. 2000
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 5A
(1) Used 60 Ton #5A Federal Single Crank Flywheel OBI Press, Remanufactured by Federal in 2000, Serial#5A-506, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 29.5 lr x 18.5 fb, Ram Size: 14 lr x 10 fb, Shut Height: 10.25, Speed: 90 SPM, Throat Depth: 10, Remanufactured by Federal in 2000, Serial#5A-506 ...more
60 Ton, Federal #5A, single crank flywheel OBI press, 4" stroke, 12.25" Shut Height, 2.5"adj., 11.5" throat, 90 SPM, 32" x21"bed, 1997
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 5A
Year: 1997
(1) Used 60 Ton Federal #5A Single Crank Flywheel OBI Press, Serial#5A-2457, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 32 lr x 21 fb, Ram Size: 14 lr x 10 fb, Shut Height: 12.25, Speed: 90 SPM, Throat Depth: 11.5, Serial#5A-2457, Capacity: 60 Ton, Stroke: 4, Adjustment: 2.5, Bed Size: 32 lr x 21 fb, Ram ...more
60 Ton, Minster #6, flywheel OBI press, 6" stroke, 11" Shut Height, 2.75" adj., 90 SPM, 32" x 21" bed, air clutch & brake, 1975, #11544
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: -6
Year: 1975
(1) Used 60 Ton Minster #6 Flywheel OBI Press, Capacity: 60 Ton, Stroke: 6, Adjustment: 2.75, Shut Height: 11 (SDAU over bed), Speed: 90 SPM, Bed Area: 32 lr x 21 fb, Air Clutch and Brake, Air Counter Balance, Dual Palm Buttons, Inch / Single / Continuous Modes, Flywheel Design, Capacity: 60 Ton, Stroke: 6 ...more
60 Ton, Minster #6, OBI press, 4" stroke, 3" adj., air clutch, 1954
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: 6
Year: 1954
(1) Used 60 Ton Minster OBI Press, Capacity: 60 Ton, Stroke: 4", Slide Adjustment: 3, Capacity: 60 Ton, Stroke: 4", Slide Adjustment: 3.
60 Ton, Minster #6, single point OBI flywheel press, 6" stroke, 14" Shut Height, 2.75"adj., 32" x21"bed, 120 SPM, air clutch & brake, 1975
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: 6
Year: 1975
For sale: Used 1975 Minster #6 OBI Flywheel Press. 60-ton capacity, 32"x21" bed, 120 SPM speed, air clutch, and brake. automatic lubrication, light curtains, and dual palm buttons. Ideal for efficient production., Capacity: 60 Ton, Stroke: 6", Adjustment: 2.75" (Motorized), Shut Height: 14" (SDAU over Bed), Bed Area: ...more
70 Ton, Federal #6, single crank flywheel OBI press, 4" stroke, 13.5" Shut Height, 3" adj., 75 SPM, 33" x25.5" bed, 1975
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 6
Year: 1975
(1) Used 70 Ton Federal #6 Single Crank Flywheel OBI Press, Serial#6-707, Capacity: 70 Ton, Stroke: 4, Adjustment: 3, Bed Size: 33 LR x 25.5 FB, Floor to Top of Bolster: 37-5/8", Floor to Bed: 35-1/4", Bolster Thickness: 2-1/2"", Shut Height: 13.5, Speed: 75 SPM, Throat Depth: 13.5, No Motor, Serial#6-707, Capacity: ...more
70 Ton, Federal #6A, single crank flywheel OBI press, 4" stroke, 13.5" Shut Height, 3" adj., 13.5"throat, 95 SPM, 33" x25.5" bed, reman. 2000
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Federal
Model: 6A
(1) Used 70 Ton Federal #6A Single Crank Flywheel OBI Press, Remanufactured By Federal 11/2000, Serial#6A-672, Capacity: 70 Ton, Stroke: 4, Adjustment: 3, Bed Size: 33 LR x 25.5 FB, Ram Size: 24 LR x 12 FB, Floor to Top of Bolster: 36", Bolster Thickness: 1-1/2", Floor to Top of Bed: 34-1/2", Shut Height: 13.5, Speed: ...more
75 Ton, Bliss #C75, OBI press, 4" stroke, 3.5" adj., 36" x 24" bed, air clutch & brake, 1968, #11499
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: C75
Year: 1968
(1) Used 75 Ton Bliss Geared OBI Press, Capacity: 75 Ton, Stroke: 4, Slide Adjustment: 3 1/2, Shut Height: 17 1/2, Speed: 80 SPM (To Be Verified), Bed Area: 36LR x 24 FB, Bolster Area: 34LR x 24"FB x 3" Thick, Drilled & Tapped, Slide Area: 23 LR x 18 FB, Air Clutch & Brake, Air Cushion, 10 HP Variable Speed ...more
75 Ton, Minster #7 Die-Namic, geared press, 4" stroke, 21" Shut Height, 3.75" adj., 45-90 SPM, 46" x 24" bed, air clutch & brake, 1973, #11057
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: 7
Year: 1973
(1) Used 75 Ton Minster #7 Die-Namic OBI Geared Press, Serial#101-7D-21375, Capacity: 75 Ton, Stroke: 4, Adjustment: 3.75 (powered), Shut Height: 21 SDAU over bed, Bed Area: 36 lr x 24 fb, (2) Bolster Plates:, Bottom Bolster 46"lr x 24"fb x 3", Solid, Top Bolster: 36"lr x 24"fb x 1 1/2", Drilled & Tapped, Ram ...more
75 Ton, Minster #7, Die-Namic geared OBI press, 6" stroke, 21" Shut Height, 3.75" adj., Cieco PCI-100, air clutch & brake, 1973, #10850
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: 7
Year: 1973
(1) Used 75 Ton Minster #7 Die-Namic Geared OBI Press, Capacity: 75 Ton, Stroke: 6, Adjustment: 3.75, Bed Area: 36 lr x 24 fb, Speed: 45 SPM, Shut Height Over Bed: 21 (SDAU), 3" thick Bolster Plate, Air Clutch & Brake, Air Counter Balances, Air Ram Adjustment, Requires New Press Controls, Capacity: 75 Ton, Stroke: ...more
110 Ton, Bliss #C-110, OBI press, 6" stroke, 21" Shut Height, 4" adj., 42" x27"bed, 80 SPM, air clutch & brake, 1967
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: C-110
Year: 1967
(1) Used 110 Ton Bliss Model C-110 OBI Press, Capacity: 110 Ton, Stroke: 6", Shut Height to Bed: 21" (SDAU), Slide Adjustment: 4", Bed Area: 42"LR x 27"FB, Slide Area: 27.5"LR x 21"FB, Speed: 80 SPM, Capacity: 110 Ton, Stroke: 6", Shut Height to Bed: 21" (SDAU), Slide Adjustment: 4", Bed Area: 42"LR x 27"FB, Slide ...more
125 Ton, Johnson #125-BGAC, single point OBI press, 8" stroke, 18" Shut Height, 42" x27"bed, 30 SPM, air clutch
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Johnson
Model: 125-BGAC
(1) Used 125 Ton Johnson Single Point OBI Press, Subject to Verification by Buyer, Capacity: 125 Ton, Stroke: 8", Shut Height: 18", Bed Area: 42"LR x 27"FB, Speed: 30 SPM, Subject to Verification by Buyer, Capacity: 125 Ton, Stroke: 8", Shut Height: 18", Bed Area: 42"LR x 27"FB, Speed: 30 SPM.
Single Cranked Back Gear OBI Press Machines
3 Results
55 Ton, Rousselle #G1-55-G, Back Geared Gap Frame Press, reman, 4" stroke, 4" adj., 60 SPM, air clutch, cnc, 12.5" Shut Height, Link 5100 MPC Control,
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: G1-55-G
Remanufactured ROUSSELLE G1-55 OBI/Gap Frame Press available immedietly. Ideal for various industrial applications, this robust machine is designed for efficiency and reliability. Perfect for those seeking cost-effective, high-quality equipment., - 55 ton, - 4 stroke, - 60 spm, - 12 Shut height over bed S.D.A.U., - 9 ...more
75 Ton, Minster #7, single crank Back Gauge OBI press, 6" stroke, 19" Shut Height, 4" adj., 36" x24"bed, 40 SPM, air clutch & brake, air counterbalance, 1968
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: 7
Year: 1968
(1) Used 75 Ton Minster #7 Single Crank Back Geared OBI Press w/ cushion, Capacity: 75 Ton, Stroke: 6", Adjustment: 4", Shut Height: 19" (slide down adjustment up over bed), Bed Area: 36" lr x 24" fb, Speed: 40 SPM, T Slots in Ram & Bolster, Palm Buttons, Air Clutch, Air Brake, Air Counterbalance, Capacity: 75 ...more
90 Ton, Verson #7, single crank OBI Back Gauge press, 6" stroke, 15" Shut Height, 3" adj., 34.5"x21"bed, 50 SPM, air clutch & brake, 1966
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Verson
Model: 7
Year: 1966
(1) Used 90 Ton Verson Single Crank OBI Back Geared Press, Capacity: 90 Ton, Stroke: 6", Adjustment: 3", Shut Height: 15" (SDAU over bed), Bed Area: 34.5" x 21", Speed: 50 SPM, Capacity: 90 Ton, Stroke: 6", Adjustment: 3", Shut Height: 15" (SDAU over bed), Bed Area: 34.5" x 21", Speed: 50 SPM.
Slear Lines (Cut-to-length and Slit To Width)
1 Result
72" x 14 gauge Iowa / Egan, slear line, 72" outside dimension, 20000 lb., 5" diameter rolls, (7) roll flattener, 20' runout table
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Iowa
(1) Used 72" x 14 Ga. x 20,000# Iowa Precision / Egan Slear Line, Egan Model M2001-72 Uncoiler, Coil Capacity: 20,000#, Coil Width: 72", Coil OD: 72", Coil ID: 18"-22", Powered Holddown, Powered Feed Up Jog, Powered Coil Car, Powered Expansion, Iowa Precision Slear 1, 72" Wide x 5" Diameter Rolls, (7) Roll Flattener ...more
Steel Slat and Chip Conveyors
1 Result
30" x 96" LNS, motorized chip conveyor, variable speed frequency drive
Category: Steel Slat and Chip Conveyors
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Lns
(1) Used 8' Long x 30" Wide LNS Motorized Chip Conveyor, Approx Overall Conveyor Dimensions (Including Chute):, 96" L x 39.5" W x 59" T, Internal Conveyor Width: 30", Electrical: 440V/3PH, Approx Overall Conveyor Dimensions (Including Chute):, 96" L x 39.5" W x 59" T, Internal Conveyor Width: 30", Electrical: ...more
Straight Side Double Crank (Single Action) Press Machines
30 Results
60 Ton, Minster #P2-60-36 Piecemaker, high speed straight side double crank, 2" stroke, 14.5" Shut Height, 3" adj., 125-375 SPM, 36" x25" bed, 1963
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-60-36
Year: 1963
Capacity: 60 Ton, Bed Area: 36" lr x 25" fb, Stroke: 2", Adjustment: 3", Shut Height: 14.5" (SDAU over bed), Speed: 125 - 375 SPM, Capacity: 60 Ton, Bed Area: 36" lr x 25" fb, Stroke: 2", Adjustment: 3", Shut Height: 14.5" (SDAU over bed), Speed: 125 - 375 SPM.
60 Ton, Minster #P2-60-36 Piecemaker, high speed straight side double crank, 3" stroke, 13.5" Shut Height, 3" adj., 80-240 SPM, 36" x25" bed, 1965
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-60-36
Year: 1965
For sale: Used 1965 Minster P2-60-36, 60 Ton High Speed Straight Side Double Crank Press. s a 36" x 25" bed, 3" stroke, 3" adjustment, and speeds from 80 to 240 SPM. Ideal for precision stamping needs., Capacity: 60 Ton, Bed Area: 36" lr x 25" fb, Stroke: 3", Adjustment: 3", Shut Height: 13.5" (SDAU over bed), Speed: ...more
100 Ton, Minster #P2-100-48-31 Piece Maker, straight side double crank, 2" stroke, 20" Shut Height, 4" adjustment, 48" x31" bed, 100-200 SPM, 16" window, air clutch & brake, 1967
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-100-48-31
Year: 1967
Capacity: 100 Ton, Stroke: 2, Adjustment: 4, Shut Height: 20 (SDAU over Bed), Bed Size: 48 L-R x 31 F-B, Bolster Thickness: 4.5 (T-Slotted), Speed: 100 - 200 SPM, Windows: 16 Wide, Floor Standing Design, Air Clutch and Brake, Air Counterbalance, Automatic Lubrication, NOTE: Feeder in photos not included, Capacity: 100 ...more
100 Ton, Minster #P2-100-48-31 Piece-Maker, straight side double crank, 5" stroke, 18" Shut Height, 4" adj., 50-100 SPM, 48" x31" bed, 16" window, air clutch & brake, 1966
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-100-48-31
Year: 1966
(1) Used 100 Ton Minster P2-100-48-31 Piece-Maker Straight Side Press, Stroke: 5", Bed Size: 48"LR x 31"FB, Slide Area: 46"LR x 18"FB, Adjustment: 4", Shut Height: 18", Speed: 50-100 SPM, Windows: 16" Wide, Air Clutch & Brake, Perfecto Crank Driven Roll Feed - Model 400-16SRF, Stroke: 5", Bed Size: 48"LR x 31"FB ...more
100 Ton, Minster #P2-100-48-31 Piece-Maker, straight side double crank, 5" stroke, 18" Shut Height, 4" adj., 50-100 SPM, 48" x31" bed, 16" window, air clutch & brake, 1970
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-100-48-31
Year: 1970
(1) Used 100 Ton Minster P2-100-48-31 Piece-Maker Straight Side Press, Capacity: 100 Ton, Stroke: 5", Bed Size: 48"LR x 31"FB, Slide Area: 46"LR x 18"FB, Adjustment: 4", Shut Height: 18", Speed: 50-100 SPM, Windows: 16", Air Clutch & Brake, Capacity: 100 Ton, Stroke: 5", Bed Size: 48"LR x 31"FB, Slide Area: 46"LR ...more
100 Ton, Rousselle #10SS100, Straight Side Double Crank Press, 100" x 30" bed, 6" stroke, 4" adjustment, 17.2" shut height, 55 SPM, 10 HP, 2025
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rousselle
Model: 10SS100
Year: 2025
100 Ton Rousselle Model 10SS100 Straight Side Press - Remanufactured in 2025, Remanufactured in 2025, Capacity: 100 Ton, Stroke: 6", Slide Adjustment: 4", Shut Height Over Bed: 17.25, Shut Height Over 3" Thick Bolster: 14.25", Speed: 55 SPM, Bed Area: 100"LR x 30"FB, Slide Area: 99"LR x 20"FB, Remanufactured in 2025 ...more
150 Ton, Bliss #S2-150-48-30, straight side double crank press, 4" stroke, 20" Shut Height, 8" adj., 48" x30"bed, 35 SPM
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: S2-150-48-30
(1) Used 150 Ton Bliss Model S2-150-48-30 Straight Side Double Crank Press, Capacity: 150 Ton, Stroke: 4", Shut Height: 20", Slide Adjustment: 8", Bed Area: 48"LR x 30"FB, Speed: 35 SPM, Capacity: 150 Ton, Stroke: 4", Shut Height: 20", Slide Adjustment: 8", Bed Area: 48"LR x 30"FB, Speed: 35 SPM.
150 Ton, Minster #P2-150-48-36, straight side double crank, 4" stroke, 8" adj., 48" x36" bed, 16" window, air clutch & brake, 1959
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-150-48-36
Year: 1959
(1) Used 150 Ton Minster P2-150-48-36 Straight Side Double Crank Press, Capacity: 150 Ton, Stroke: 4", Bed Size: 48" LR x 36" FB, Adjustment: 8", Windows: 16", Air Clutch & Brake, Capacity: 150 Ton, Stroke: 4", Bed Size: 48" LR x 36" FB, Adjustment: 8", Windows: 16", Air Clutch & Brake.
150 Ton, Thunder Bay, straight side double crank press, 8" stroke, 21.5" Shut Height, 25 SPM, 71" x33"bed
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 150 Ton Thunder Bay Straight Side Double Crank Press, Capacity: 150 Ton, Stroke: 8", Shut Height: 21-1/2", Bed Area: 71"LR x 33"FB, Speed: 20 SPM, Capacity: 150 Ton, Stroke: 8", Shut Height: 21-1/2", Bed Area: 71"LR x 33"FB, Speed: 20 SPM.
200 Ton, Minster #P2-200-54, straight side double crank, 2" stroke, 22" Shut Height, 6" adj., 70-210 SPM, OmniLink 805, 22" x 15" window
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: P2-200-54
(1) Used 200 Ton Minster P2-200-54 Piece Maker Straight Side Double Crank Press, Capacity: 200 Ton, Stroke: 2", Slide Adjustment: 6", Shut Height: 22, Bed Area: 54" x 44", Window Opening: 22" x 15", Speed: 70 - 210 SPM, Equiped With:, OmniLink 805 Control, Perfecto Crank Driven Roll Feeder, Capacity: 200 Ton, Stroke: ...more
220 Ton, Komatsu #E2T-200N, 15.7" stroke, 25.5" DH, 78.7x31.5" bed, 15-30 SPM, 1986, #9714(3 available)
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: E2T-200N
Year: 1986
(1) Used 220 Ton Komatsu Eccentric Gear 2-Point Straight Side Press, Serial Number: 10017, Capacity: 220 Short Ton (200 Metric Ton), Stroke: 15.75 (400mm), Die Height: 25.59 (Over Bolster) (650mm), Slide Adjustment: 5.91 (150mm), Bed & Slide Area: 78.74 L-R x 31.5 F-B (2000mm x 800mm), Speed: 15-30 SPM, Windows: ...more
220 Ton, Komatsu #E2T-200N, Eccentric Gear 2 Point, 15.7" stroke, 25.59" die height, 5.91" adj, air clutch & brake, 1986
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: E2T-200N
Year: 1986
(1) Used 220 Ton Komatsu Eccentric Gear 2-Point Straight Side Press, Serial Number: 10018, Capacity: 220 Short Ton (200 Metric Ton), Stroke: 15.75 (400mm), Die Height: 25.59 (Over Bolster) (650mm), Slide Adjustment: 5.91 (150mm), Bed & Slide Area: 78.74 L-R x 31.5 F-B (2000mm x 800mm), Speed: 15-30 SPM, Windows: ...more
220 Ton, Komatsu #E2T-200N, 15.7" stroke, 25.59" die hght, 5.91" adj, air clutch & brake, 1986, #9718
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: E2T-200N
Year: 1986
(1) Used 220 Ton Komatsu Eccentric Geared 2-Point Straight Side Press, Serial Number: 10019, Capacity: 220 Short Ton (200 Metric Ton), Stroke: 15.75 (400mm), Die Height: 25.59 (Over Bolster) (650mm), Slide Adjustment: 5.91 (150mm), Bed & Slide Area: 78.74 L-R x 31.5 F-B (2000mm x 800mm), Speed: 15-30 SPM, Windows: ...more
250 Ton, Bliss #HP2-250-60, 8" stroke, 25" Shut Height, 4" adj., 60" x42" bed, 55-110spm, air clutch, 1973, #11030
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: HP2-250-60
Year: 1973
(1) Used 250 Ton Bliss HP2-250-60-42 Straight Side Double Crank Press, Capacity: 250 Ton, Stroke: 8, Shut Height: 25, Slide Adjustment: 4, Bed Area: 60 L-R x 42 F-B, Speed: 55 - 110 SPM, Windows: 27 Wide x 22 High, Air Clutch & Brake, Flush Floor Design, Free Standing Control Console, Approximate Overall ...more
250 Ton, USI Clearing #S2-250-84-54, 12" stroke, 30" Shut Height, 12" adj., 84" x54"bed, 1984, #10798
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Usi Clearing
Model: S2-250-84-54
Year: 1984
S/N: 51-1546, YEAR: 1984, 250 TON CAPACITY, 12" STROKE, 30" SHUT HEIGHT (S.D.A.U.), 12" SLIDE ADJUSTMENT, 84" LR X 54" FB BED AREA, 30" WINDOWS, 36 SPM MAXIMUM, AIR CLUTCH & BRAKE, TWIN END DRIVE, SINGLE BACK GEARED, TIE ROD CONSTRUCTION, CLEARING PRESS CONTROL CABINET, OMNILINK II OPERATOR TERMINAL, SHADOW 8 ...more
300 Ton, Bliss #SC2-300-96-54, straight side double crank, 10" stroke, 40" Shut Height, 12" adj, 96" x54"bed, 10-60 SPM, 1997
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: SC2-300-96-54
Year: 1997
Serial Number: H-71399, Capacity: 300 Tons, Stroke: 10, Shut Height: 40 SDAU over Bed, Slide Adjustment: 12, Bed & Slide: 96 L-R x 54 F-B, Bolster Thickness: 7, Speeds: 10 - 60 SPM (Variable), Windows: 34 wide x 20 high, Bolster Plate: 96 x 54 x 7 Thick (T-slotted), Slide: T-Slotted, Main Drive Motor: 60 HP, Air ...more
300 Ton, Danly #E2-300-84-48, straight side double crank, 24" stroke, 60" Shut Height, 10" adj., 22-30 SPM, 84" x48" bed, 32" windows, air clutch & brake, 1966
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Danly
Model: E2-300-84-48
Year: 1966
(1) Used 300 Ton Danly Model SE2-300-84-48 Straight Side Press, Capacity: 300 Ton, Stroke: 24", Shut Height, Slide to Bed: 60", Slide Adjustment: 10", Bed Area: 84"LR x 48"FB, Speed: 30 SPM Continuous / 22 SPM Single Stroke, Windows: 32" x 32", Floor to Top of Bed: 38", Capacity: 300 Ton, Stroke: 24", Shut Height ...more
300 Ton, Heim Maxi #S2-300MS, 10" stroke, 32" Shut Height, 10" adj., 25-50 SPM,Link Omnilink 5000,2001
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Heim
Model: S2-300MS
Year: 2001
(1) Used 300 Ton Heim S2-300 Maxi Stamper Straight Side Double Crank Press, Serial# H-3939, Capacity: 300 Ton, Stroke Length: 10, Adjustment: 10, Shut Height: 32 Over Bolster (SDAU), Bolster Size: 100 lr x 60 fb x 6 thick, Note: second bolster in photo not included., Speed: 25 - 50 SPM, Link Omnilink 5000 Control, Die ...more
300 Ton, Komatsu #E2G-300UD, 2-point, 14.2" stroke, 28.3"die hght, 10.2"adj., 1988, #10794
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: E2G-300UD
Year: 1988
1988 Used 300 Ton Komatsu #E2G-300UD Straight Side Double Crank Press available. s include a 300T capacity, 14.2 stroke, and variable speeds from 12-40 spm. controls and safety s. Ideal for robust production needs., Serial Number: 10092, Manufactured: 1988, Capacity: 300 Tons, Stroke: 14.2, Die Height: 28.3, Slide ...more
300 Ton, Minster HeviStamper #E2-300-54-36, straight side double crank press, 1.5" stroke, 22" Shut Height, 6" adj., 150 SPM, 21" windows, air clutch & brake
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: E2-300-54-36
(1) Used 300 Ton Minster HeviStamper Straight Side Double Crank Press, Serial# E2-300-21320, Capacity: 300 Ton, Bed Area: 54 lr x 36 fb, Stroke: 1.5, Adjustment: 6, Shut Height: 22 above bed (slide down adjustment up), Bolster Thickness: 6 T slotted, Ram: T Slotted, Speed: 0 - 150 SPM, Windows: 21 wide, Air Clutch and ...more
300 Ton, Minster Hevi Stamper #E2-300-84-48, straight side double crank press, 12" stroke, 30" Shut Height, 6" adj., 80 SPM, 84" x48"bed, 27" windows, OmniLink LCD, air clutch & brake, 1984
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: E2-300-84-48
Year: 1984
(1) Used 300 Ton Minster E2-300-84-48 Hevi Stamper Straight Side Double Crank Press, Capacity: 300 Ton, Bed Area: 84" lr x 48" fb, Stroke: 12", Adjustment: 6", Shut Height: 30" over bed (slide down adjustment up), Bolster Thickness: 6", Approx Floor to Top of Bolster: 50" (Sitting on Vibro Mounts), Speed 0 - 80 SPM ...more
330 Ton, Komatsu #L2M300-3BM, straight side double crank press, 4.9" stroke, 21.65"die height, 3.94"adj., 84.65"x39.37"bed, 50-120 SPM, 35" W x 25.5"H window, air clutch & brake, 1999
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: L2M300-3BM
Year: 1999
(1) Used 330 Ton Komatsu Straight Side Double Crank Press Link Drive, Capacity: 330 Ton, Stroke: 4.92", Adjustment: 3.94", Die Height: 21.65", Bed Area: 84.65" lr x 39.37" fb, Bolster Thickness: 9.84", Ram Area: 84.65" lr x 35.43" fb, Speed: 50 - 120 SPM (variable speed), Windows: 35" Wide x 25.5" High, Capacity: 330 ...more
330 Ton, Sutherland #SP2-D300-120-60-12, 12" stroke, 30" Shut Height, air clutch & brake, 2000, #10422
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Sutherland
Model: SP2-D300-120-60-12
Year: 2000
(1) Used 330 Ton Sutherland SP2-D300-120-60 Straight Side Double Crank Press, Serial Number: F-1386 730114, Capacity: 330 Ton @.5 Above Bottom, Stroke: 12, Shut Height Over Bolster: 30 S.D.A.U., Slide Adjustment: 10, Bed Area: 120 L-R x 60 F-B, Slide Area: 120 L-R x 60 F-B, Bolster Plate: 120 L-R x 60 F-B x 7.6 Thick ...more
400 Ton, Heim #MAXI-S2-400-120-60, straight side double crank press, 12" stroke, 40" Shut Height, 10" adj., 25-50 SPM, 120" x60" bed, 28" window, air clutch & brake, new
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Heim
Model: MAXI-S2-400-120-60
(1) NEW 400 Ton HEIM 120" x 60" MAXI STAMPER Straight Side Double Crank Press, Capacity: 400 Ton (Full flywheel energy at 37 spm), Frame Type: Tie Rod Construction, Rated Distance:.500" BDC, Drive Type: Eccentric Geared, Speed: 25 - 50 SPM, Stroke Length: 12", Bed Size: 120" lr x 60" fb, Bolster Area: 120" lr x 60" ...more
440 Ton, Komatsu #L2M400-3BM, straight side double crank, 11.8" stroke, 27.5" Shut Height, 5.91" adj., 96.46" x45.28" bed, 25-60 SPM, 2001
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Komatsu
Model: L2M400-3BM
Year: 2001
(1) Used 440 Ton Komatsu Model L2M400-3BM Straight Side Press, Capacity: 440 Ton, Bed Area: 96.46" lr x 45.28" fb, Ram Area: 96.46" lr x 49.28" fb, Stroke: 11.81, Shut Height: 27.56", Adjustment: 5.91 (motorized), Speed: 25-60 SPM, Windows: 47, hydraulic Overloads, light curtains, Capacity: 440 Ton, Bed Area: 96.46" ...more
440 Ton, Seyi #HSD-H-440-3, straight side double crank press, 10" stroke, 30" Shut Height, 10" adj., 122" x55"bed, 25-50 SPM, 43" window, 1995
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Seyi
Model: HSD-H-440-3
Year: 1995
1995 SEYI HSD-H-440-3, 440 Ton capacity, featuring dual palm buttons and variable speed. Straight side double crank design with 122" x 55" bed. Offering speeds from 25 to 50 spm. Floor standing with vibro mounts., Capacity: 440 Ton, Bed Area: 122" lr x 55.1" fb, Slide Area: 122" lr x 55.1" fb, Bolster Thickness: ...more
500 Ton, Minster Hevistamper #E2-500-60-48, 6" stroke, 24" Shut Height, 6" adj., 60" x 48" bed, 40-100 SPM, air clutch & brake, 1974, #11583
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: E2-500-60-48
Year: 1974
(1) Used 500 Ton Minster E2-500-60-48 HeviStamper Straight Side Press, Tonnage: 500, Stroke: 6, Shut Height Over Bed, SDAU: 24, Slide Adjustment: 6, Bed Area: 60 L-R x 48 F-B, Speed: 40 - 100 SPM, Windows: 30, Air Clutch & Brake, Air Counterbalances, Motor / Electrics / Controls, Approx Overall Dimension: 152 lr x ...more
600 Ton, Blow #SDG-600-96-48, 16" stroke, 36" Shut Height, 10" adj, 96" x48" bed, air clutch & brake, 1985, #10396
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Blow
Model: SDG-600-96-48
Year: 1985
(1) Used 600 Ton Blow SDG-600-96-48 Straight Side Double Crank Press, Serial Number: SDG-600-23185, Capacity: 600 Ton, Stroke: 16, Shut Height: 36, Slide Adjustment: 10, Bed & Slide Area: 96LR x 48FB, Speeds: 14 - 28 SPM Variable, Windows: 16, Air Clutch & Brake, Twin End Drive, T-Slotted Bolster Plate ...more
600 Ton, Brown & Boggs #SS2-600, straight side double crank, 12" stroke, 30" Shut Height, 12" adj., 15-40 SPM, 120" x60" bed, Wintriss SmartPac Pro
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Brown & Boggs
Model: SS2-600
(1) Used 600 Ton Brown Boggs Model SS2-600 Straight Side Double Crank Press, Capacity: 600 Ton, Bed Area: 120"LR x 60"FB, Slide Area: 120"LR x 60"FB, Stroke: 12", Shut Height: 30", Slide Adjustment: 12", Speed: 15-40 SPM, Wintriss SmartPac Pro Control, Windows, Repairs required, Capacity: 600 Ton, Bed Area: 120"LR x ...more
600 Ton, Verson #S2-600-108-60T, SSSC press, 16" stroke, 48" Shut Height, 10" adj., 14 SPM, 36" window, 108" x60" bed, air clutch & brake, 1967
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Verson
Model: S2-600-108-60T
Year: 1967
(1) 600 Ton Verson Model S2-600-108-60T Straight Side Press, Capacity: 600 Ton, Stroke: 16", Shut Height: 48", Slide Adjustment: 10", Bed Area: 108" L-R x 60" F-B, Speed: 14 SPM, Windows: 36" Wide, Floor Standing, Air Clutch & Brake, Capacity: 600 Ton, Stroke: 16", Shut Height: 48", Slide Adjustment: 10", Bed ...more
Straight Side Single Crank (Single Action) Press Machines
2 Results
150 Ton, Bliss #S1-150-27-33, SSSC press, 12" stroke, 22" Shut Height, 3.5" adj., 38 SPM, 27" x33" bed, 19.25" windows, air cooled & brake
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: S1-150-27-33
SERIAL #: H 53718, 12" STROKE, 22" SHUT HEIGHT, 3.5" POWERED RAM ADJUSTMENT, 38 SPM, 27" LR x 33" FB BED, 19.25" WINDOWS, 3.5" T SLOTTED BOLSTER, T SLOTTED RAM, PALM BUTTONS, AIR CLUTCH & BRAKE, AIR COUNTERBALANCES, JOBBER PLUS CONTROLS, FLOOR STANDING ON VIBRATION MOUNTS, SERIAL #: H 53718, 12" STROKE, 22" SHUT ...more
200 Ton, Minster #S1-200-30-36, SSSC press, 12" stroke, 18" Shut Height, 6" adj., 60 SPM, 1965
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: S1-200-30-36
Year: 1965
(1) Used 200 Ton Minster Straight Side Single Crank Press, Serial# S1-200-16194, Capacity: 200 Ton, Bolster Size: 30 lr x 36 fb, Stroke: 12, Adjustment: 6, Shut Height: 18, Speed: 60 SPM, Air Clutch & Brake, Air Counter Balance, Dual Palm Buttons, Spare Clutch/Brake Assembly - New in Box, Serial# S1-200-16194 ...more
Tank Mounted Air Compressors
1 Result
15 HP Air Compressor, #11313
Category: Tank Mounted Air Compressors
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 15 HP Air Compressor, Have it stored at our Ferndale, Michigan warehouse. (Detroit Area), (1) Used 15 HP Air Compressor, (1) Used 15 HP Air Compressor.
Tooling and Accessories - Miscellaneous
1 Result
Screw jack, Uni-Lift #JKFF0060, 30" width x .125" Thick, edge conditioner, 3 stands, manual adj., 2009, #11279
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Uni-Lift
Model: JKFF0060
Year: 2009
(1) Used CHS 30 Wide x.125 Thick Edge Conditioner, Custom Design by CHS, Estimated, (3) Stands, Manual Width Adjustment, Manual Thickness Adjustment, Max. Material Capacity: 30 Wide x.125 Thick, Pull Thru Design, Currently Tooled to Condition Top Edge, Custom Design by CHS, Estimated, (3) Stands, Manual Width ...more
Teledyne Pines #M-94604-Dial-A-Bend, vertical hydraulic tube bender, 460 V., 3-phase
Category: Tube and Pipe Benders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Teledyne Pines
Model: M-94604-DIAL-A-BEND
(1) Used 1 1/2 Teledyne Pines Vertical Hydraulic Tube Bender, Serial# 44361-89098, Capacity: 1 1/2 OD Capacity x.065 wall thickness, Digital Dial a Bend Control, Bending Angle Max: 140, 2000 PSI Operating Pressure, 1500 Bends per hour, Max Centerling Radius: 4.5 - 90 or less, Min Centerline Radius: 2 to 3 times tube ...more
Tube End Finishing and Forming Machines
1 Result
Hause #Holomatic-811H, hydraulic tube reamer
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Hause
Model: HOLOMATIC-811H
(1) Used Hause Holomatic Hydraulic Tube Reamer, Consists of 3 Hause Holomatics, 1.5 HP Spindle Motor, 1/4 HP Coolant Pump, Micro Logic 1000 Control, Consists of 3 Hause Holomatics, 1.5 HP Spindle Motor, 1/4 HP Coolant Pump, Micro Logic 1000 Control.
Uncoilers and Centering Coil Reels
20 Results
220 lb. Huei Shang #HR-105D, motorized pallet uncoiler, 31" outside dimensions, variable speed, forward & reverse, 2014
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: HR-105D
Year: 2014
(1) Used 220# x 31" diameter Huei Shang Model: HR-105D Motorized Pallet Uncoiler, Max Coil Weight: 220#, Max Coil O.D.: 31", Variable Speed, Forward & Reverse, Working Timer, 220 Volt / Single Phase, Max Coil Weight: 220#, Max Coil O.D.: 31", Variable Speed, Forward & Reverse, Working Timer, 220 Volt / Single ...more
500 lb. Rapid-Air #R56A, motorized uncoiler, 6" width, 36" outside dimensions, 9"-20" ID, 33 RPM
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rapid-Air
Model: R56A
(1) Used 500# x 6" Rapid Air Model R56A Motorized Uncoiler, Max Coil Weight: 500#, Max Coil Width: 6", Max Coil OD: 36", Coil ID Range: 9" - 20", Speed: 33 RPM, Max Coil Weight: 500#, Max Coil Width: 6", Max Coil OD: 36", Coil ID Range: 9" - 20", Speed: 33 RPM.
500 lb. Rapid-Air #RS58A, motorized uncoiler, 6" width, 36" outside dimensions, 9"-20" ID, 33 RPM
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rapid-Air
Model: RS58A
(1) Used 500# x 6" Rapid Air Model RS58A Motorized Uncoiler, Max Coil Weight: 500#, Max Coil Width: 6", Max Coil OD: 48", Coil ID Range: 9" - 20", Speed: 33 RPM, Max Coil Weight: 500#, Max Coil Width: 6", Max Coil OD: 48", Coil ID Range: 9" - 20", Speed: 33 RPM.
2000 lb. Littell #20-12, non-powered reel, 12" width, 60" outside dimensions, 16"-20" ID, elec.brake, 1969, #10432
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 20-12
Year: 1969
(1) Used 2,000 Lbs. x 12 Wide Littell Non-powered Reel, Coil Capacity: 2,000 lbs, Coil Width: 12, Coil ID: 16 - 20, Coil OD: 60, Manual Expansion, Electric Brake, Approximate Weight: 1,000 lbs, Coil Capacity: 2,000 lbs, Coil Width: 12, Coil ID: 16 - 20, Coil OD: 60, Manual Expansion, Electric Brake, Approximate ...more
2500 lb. American Steel Line #60, coil line, 18" width, manual expansion, 3 keepers, #11223
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: American Steel Line
Model: 60
(1) Used 6 Cooper Weymouth (17) Roll Press Parts Straightener, (17) Straightening Rolls, 6 Coil Width, (17) Straightening Rolls, 6 Coil Width.
2500 lb. Coe Press Equipment #CPR-PO-2512, non-motorized uncoiler, 12" width
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Model: CPR-PO-2512
(1) Used 2500# x 12" wide COE Non-Motorized Uncoiler, COE PRESS EQUIPMENT CPR-PO-2512, Max Coil Weight. 2500 lb, Max Coil Width. 12 in, COE PRESS EQUIPMENT CPR-PO-2512, Max Coil Weight. 2500 lb, Max Coil Width. 12 in.
4000 lb. Dallas #DPR-4,000#x24, motorized uncoiler, 24" width, 60" outside dimensions, 16"-21" ID, jog fwd/rev
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dallas
Model: DPR-4,000#X24
(1) Used 4,000# x 24" Wide Dallas Motorized Uncoiler, Model: DPR-4,000# x 24" / 06155, Capacity: 4,000#, Coil Width: 24", Coil I.D.: 16"-21", Coil O.D.: 60", Motorized, Jog Fwd/Rev, Model: DPR-4,000# x 24" / 06155, Capacity: 4,000#, Coil Width: 24", Coil I.D.: 16"-21", Coil O.D.: 60", Motorized, Jog Fwd/Rev.
4000 lb. Littell #40-12, motorized coil reel, 12" width, 60" outside dimensions, 15"-20" ID, 18" mandrel, manual expansion
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 40-12
(1) Used 4,000# x 12 wide Littell Motorized Coil Reel, Max Coil Weight: 4,000#, Max Coil Width: 12 (18 Mandrel), Max Coil OD: 60, Coil ID Range: 15 - 20, Back Plate, Power Jog, Automatic Feed w/dancer arm, Manual Expansion, Approx Dimensions: 53 fb x 70 lr x 74 tall, Approx Weight: 1500#, Max Coil Weight: 4,000#, Max ...more
4000 lb. Littell #40-18, motorized coil reel, 18" width, 48" outside dimensions, 15"-20" ID, manual expansion, backing plate, 4-leaf mandrel, loop Control, 1965
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 40-18
Year: 1965
(1) Used 4,000# x 18" Wide Littell Model 40-18 Motorized Coil Reel, Coil Capacity: 4,000#, Coil Width: 18", Coil O.D.: 48", Coil I.D.: 15"-20", Manual Expansion, Backing Plate, 4-Leaf Mandrel, Loop Control, Coil Capacity: 4,000#, Coil Width: 18", Coil O.D.: 48", Coil I.D.: 15"-20", Manual Expansion, Backing Plate ...more
6000 lb. Coe Press Equipment #CPR-6030, motorized uncoiler, 30" width, 60" outside dimensions, 3-leaf, manual expansion, loop Control, jog fwd/rev
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Model: CPR-6030
(1) Used 6,000# x 30" Wide Coe Model CPR-6030 Motorized Uncoiler, Model: CPR-6030, Coil Capacity: 6,000#, Coil Width: 30", Coil O.D.: 60", Motorized, Three Leaf, Manual Expansion, Loop Control, Jog Fwd/Rev, Auto/Jog, Model: CPR-6030, Coil Capacity: 6,000#, Coil Width: 30", Coil O.D.: 60", Motorized, Three Leaf, Manual ...more
6000 lb. Coe Press Equipment, uncoiler w/ coil car, 18" width, 60" outside dimensions, manual jog, 3-leaf mandrel, loop Control
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
(1) Used 6,000# x 18" Wide Coe Press Equipment Uncoiler with Coil Car, Coil Capacity: 6,000 Lbs, Coil Width: 18", Coil O.D.: 60", Three Leaf Mandrel, Backing Plate, Controls:, Auto / Manual, Manual Jog, Auto Star, Mandrel Expansion / Contraction, Rotation Forward / Reverse, Cradle Up / Down, Reel Extend / Retract ...more
6000 lb. Jaco, non-motorized coil reel, 20" mandrel, 12" width, 72" outside dimensions, 16"-20" ID, manual brake / expansion, no keepers
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Jaco
(1) Used 6,000# x 12" Jaco Non Motorized Coil Reel, 16" - 20" ID, 20" MANDREL, 72" OD, NON MOTORIZED, MANUAL EXPANSION, MANUAL BRAKE, 3 BACK STOPS, NO KEEPERS, 62" X 40" X 52" T APROX., 1500 LBS APROX., 16" - 20" ID, 20" MANDREL, 72" OD, NON MOTORIZED, MANUAL EXPANSION, MANUAL BRAKE, 3 BACK STOPS, NO KEEPERS, 62" X ...more
6000 lb. Jaybird #CRM-2460, motorized uncoiler, 24" width, 72" outside dimensions, 18"-22" ID, jog fwd/rev, loop Control arm
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Jaybird
Model: CRM-2460
(1) Used 6,000# x 24" Wide Jaybird Motorized Uncoiler, Model: CRM-2460, Coil Capacity: 6,000#, Coil Width: 24", Coil I.D.: 18"-22", Coil O.D.: 72, Motorized, Jog Fwd/Rev, Loop Control Arm, Model: CRM-2460, Coil Capacity: 6,000#, Coil Width: 24", Coil I.D.: 18"-22", Coil O.D.: 72, Motorized, Jog Fwd/Rev, Loop Control ...more
6000 lb. Littell #60-24, non-powered coil reel, 24" width, 60" outside dimensions, 16"-20" ID, manual expansion, electric brake, 1970
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 60-24
Year: 1970
(1) Used 6,000 Lbs x 24 Littell Non-Powered Coil Reel, Coil Width: 24, Coil Capacity: 6,000 Lbs, Coil I.D.: 16 - 20, Coil O.D.: 60, Electric Brake, Manual Expansion, Coil Width: 24, Coil Capacity: 6,000 Lbs, Coil I.D.: 16 - 20, Coil O.D.: 60, Electric Brake, Manual Expansion.
10000 lb. American Steel Line #1000, motorized uncoiler, 36" width, hydraulic expansion, holddown arm, 1990
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: American Steel Line
Model: 1000
Year: 1990
Used AMERICAN STEEL LINE 1000 Uncoiler, 1990. Handles up to 10,000 lb coils, 36" wide. s hydraulic expansion and hold down arm. Ideal for industrial applications., Max Coil Weight: 10,000#, Max Coil Width: 36", Hydraulic Expansion, Hold Down Arm, Max Coil Weight: 10,000#, Max Coil Width: 36", Hydraulic Expansion, Hold ...more
10000 lb. Dallas #06700, motorized uncoiler, 30" width, 60" outside dimensions, 20"-24" ID, 3-leaf, manual expansion, jog forward/revers, air cooled & brake, 1986
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dallas
Model: 06700
Year: 1986
(1) Used 10,000# x 30" Wide Dallas Motorized Uncoiler, Coil Capacity: 10,000#, Coil Width: 30", Coil O.D.: 60", Coil I.D.: 20"-24", Standard Speed:100 FPM, Coil Capacity: 10,000#, Coil Width: 30", Coil O.D.: 60", Coil I.D.: 20"-24", Standard Speed:100 FPM.
20000 lb. Bradbury #420-60, uncoiler, 60" width, 72" outside dimensions, 17"-21" ID, 4 leaf style, #11021
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bradbury
Model: 420-60
(1) Used 20,000 Lbs x 60 Wide Bradbury Non-Powered Uncoiler, Coil Weight: 20,000 Lbs, Coil Width: 60, Coil OD: 72, Approximate ID: 17 - 21, Hydraulic Expansion, Four Leaf Style, Electric Brake, Coil Weight: 20,000 Lbs, Coil Width: 60, Coil OD: 72, Approximate ID: 17 - 21, Hydraulic Expansion, Four Leaf Style, Electric ...more
20000 lb. Coe Press Equipment, motorized uncoiler, 30" width, variable speed, holddown arm, hydraulic expansion
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coe Press Equipment
Used COE CPR-20030 Motorized Uncoiler: Ideal for handling heavy coils with a max weight of 20,000 lb and a width of 30 in. s variable speed, hold down arm, and hydraulic expansion. Perfect for robust industrial applications., Max Coil Weight: 20,000#, Max Coil Width: 30", Variable Speed, Hold Down Arm, Hydraulic ...more
20000 lb. Egan, uncoiler w/ coil car, 72" width, 72" outside dimensions
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Egan
(1) Used 20,000 Lbs x 72" Wide Egan Model M2001-72 Uncoiler with Coil Car, Coil Capacity: 20,000#, Coil Width: 72", Coil OD: 72", Coil ID: 18"-22", Floor Standing Coil Car, Powered Expansion, Powered Jog, Powered Holddown, Coil Capacity: 20,000#, Coil Width: 72", Coil OD: 72", Coil ID: 18"-22", Floor Standing Coil ...more
Double End Tube Uncoiler, 12" width
Category: Uncoilers and Centering Coil Reels
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
(1) Used 12 Wide Double End Tube Uncoiler, Unknown Capacity, 12 Width, Double End, Unknown Capacity, 12 Width, Double End.
Upenders and Downenders
4 Results
12000 lb. Coilquip #MU-12000V60, coil upender, 60" OD, 2025
Category: Upenders and Downenders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: MU-12000V60
Year: 2025
(1) NEW 12,000# x 60" Coilquip Model MU 12000V60 Coil Upender, MU 12000 V (PAC-MAN) COIL UPENDER, Brand new, made-to-order in the USA, 12,000 pound capacity, 60" O.D. coil maximum (also available in 72" O.D.), Removable, 3-position v-saddle, Deck dimensions 48" x 48", 2-Channel Lodar remote controls (two included) ...more
12000 lb. Coilquip #MU-12000V72, coil upender, 72" OD, 2025, new
Category: Upenders and Downenders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: MU-12000V72
Year: 2025
(1) NEW 12,000# x 72" Coilquip Model MU 12000V72 Coil Upender, Brand new, made-to-order, 12,000 pound capacity, 72" O.D. coil maximum, Removable, 3-position v-saddle, Deck dimensions 56" x 56", 2hp eurodrive motor and gearbox, Dual #80 roller chain drive, 208-230/460/3/60 or 230/1/60, Dimensions approx. 82" L x 66" W ...more
20000 lb. Coilquip #MU20000V60RT, mechanical upender w/ rotation, 72" width, 60" outside dimension, removable v-saddle, dual remote Control, 2 HP Eurodrive motor & gearbox, 2026, new
Category: Upenders and Downenders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coilquip
Model: MU20000V60RT
Year: 2026
Introducing the 2026 NEW Coilquip MU20000V60RT Upender. Handle up to 20,000 lb coils with ease. s: 60" OD capacity, dual remote controls, and mechanical rotationideal for demanding industrial tasks. Made-to-order in the USA., Brand new, made-to-order MADE in the USA, 20,000 pound capacity, 60" O.D. coil maximum (also ...more
20000 lb. Coilquip #MU20000V80RT, mechanical upender w/ rotation, 72" W, 60" OD, removable v-saddle, dual-channel remote, 2 HP Eurodrive motor, 2026, new
Category: Upenders and Downenders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Coilquip
Model: MU20000V80RT
Year: 2026
Brand new Coilquip MU20000V80RT Mechanical Upender perfect for handling up to 20,000 lbs and 80" O.D. coils. s removable v-saddle, dual-channel remote, 2hp eurodrive motor, and optional 180-degree rotation for seamless operation without hydraulics., Brand new, made-to-order MADE in the USA, 20,000 pound capacity, 80" ...more
Variable Speed Motors (Adjustable Speed)
2 Results
30 HP 1760 RPM Dynamic, adjusto speed motor, 230/460 Volts, NP-1
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dynamic
30 HP Dynamic Adjusto Speed Motor, 30 HP Adjusto Speed Motor, Model: PD-273004-0001, Serial Number: 67914 018 0001, Motor, Type: NP-1, Duty: Cont., HP: 30, Hertz: 60, Volts: 230/460, Amps: 79.2 / 39.6, RPM: 1760, Clutch, Min RPM 150 - Max RPM 1675, Volts D.C. 90, 30 HP Adjusto Speed Motor, Model: PD-273004-0001 ...more
30 HP RPM Dynamic, adjusto speed motor, NP-1
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dynamic
30 HP Dynamic Adjusto Speed Motor, 30 HP Motor, Type: NP-1, 30 HP Motor, Type: NP-1.
Vertical Band Saws
1 Result
60" x 26" DoAll Zephyr #ZV-60-26, vertical band saw, extended throat, 36" x 36" tilting table
Category: Vertical Band Saws
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Doall
Model: ZV-60-26
(1) Used Do-All Model Zephyr ZV-60-26 Extended Throat Vertical Band Saw, Capacity: 13.5" vertical clearance, Throat Depth: Standard: 26" / Using Upper Wheel: 60", Table Size: 36" lr x 36" fb, Tilting Table, Capacity: 13.5" vertical clearance, Throat Depth: Standard: 26" / Using Upper Wheel: 60", Table Size: 36" lr x ...more
Vertical CNC Machining Centers
2 Results
Fadal #VMC3016L, vertical machining center, 21 automatic tool changer, 30" X, 16" Y, 20" Z, 7500 RPM, #40,15 HP, 38" x16"tbl.,rigid tap, 2000
Category: Vertical CNC Machining Centers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fadal
Model: VMC3016L
Year: 2000
X-Axis Travel: 30Y-Axis Travel: 16Z-Axis Travel: 20Table Size: 38 x 16Spindle Power: 15 HPSpindle Speed: 7,500 RPMAuto Tool Changer: 21 PositionsTaper: CAT-40, Electrics: 230/440 V; 3 Ph; 60 HzFull Load Current: 40/20 AmpApprox Weight: 6,500 lbs.Approx Length: 98 x 89 x 101, Fadal Multi Processor CNC ControlBox ...more
Fadal #VMC6030HT, vertical machining center, 21 automatic tool changer, 60" X, 30" Y, 30" Z, 10000 RPM, #40, 15 HP, 62.5" x 30" table
Category: Vertical CNC Machining Centers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fadal
Model: VMC6030HT
(1) Used Fadal Model 6030HT Vertical Machining Center, X Axis Travel: 60, Y Axis Travel: 30, Z Axis Travel: 30, Table Size: 62.5 x 30, Tool Positions: 21 ATC, Spindle Speed: 10,000 RPM *, Spindle Taper: CT40 *, Spindle Motor: 15 HP *, Electrical: 480V/3ph/60hz *, No Coolant System, * All subject to customer ...more
No. W-115A, Torin, spring coiler, .032" - .112" wire diameter, 156" - 2.125" outside dimension, 24-200 SPM, two plane straightener
Category: Wire Spring Coilers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: W115A
(1) Used Torin Model W 115-A Spring Coiler, Wire Diameter Range:.032" -.112", Coil O.D. Range:.156" - 2.125", Production Rate: 24 to 200 SPM, Two Plane Straightener, Wire Diameter Range:.032" -.112", Coil O.D. Range:.156" - 2.125", Production Rate: 24 to 200 SPM, Two Plane Straightener.
No. W-11A, Torin, spring coiler, .015" - .072" wire diameter, .093" - 1.562" outside dimension, 20-200 SPM, two plane straightener
Category: Wire Spring Coilers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Model: W11A
(1) Used Torin Model W-11A Spring Coiler, Wire Diameter Range:.015" -.072", Coil O.D. Range:.093" - 1.562", Production Rate Standard: 20 to 200 spm, Production Rate Optional: 28 to 280 spm, Two Plane Straightener, Wire Diameter Range:.015" -.072", Coil O.D. Range:.093" - 1.562", Production Rate Standard: 20 to 200 ...more
