Advanced Search
Surplus Record


CENTERING MACHINES (Milling & Facing & Centering Machines)

8" x 40" Conventional #XZ8220C double end facing & centering machine, also 60" & 80"

Request a Quote
Share
8" x 40" Conventional #XZ8220C double end facing & centering machine, also 60" & 80"
Machine specification
1„€Max. turning diameter × length(mm) ‚”ˆ‚”ˆ‚”ˆ‚”„‚”ˆ‚”ˆ‚”ˆÎ100×500 &1000
2„€working range
Max.milling diameter(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆÎ100
Max.drilling diameter(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆÎ4/5/6
Max.turning length(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ1000
Min.turning length(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ100
3„€main parameters
distance from drilling/milling spindle centerline to guideway surface(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ255
distance between drilling & milling spindles (mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ180
distance from drilling/milling spindle centerline to floor (mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ1055
Max.vise clamping diameter(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆÎ100
Max.milling spindle speed(gears change) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ320/400/500/630
Max.drilling spindle speed(gears change) ‚”ˆ‚”ˆ‚”ˆ630/800/1000/1250
drill/mill feed range ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ0.03‚”€0.1stepless
Max.mill travel(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 165
Max.drill travel(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 90
Max.mill amount(one side mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 6
mill cutter diameter(mm) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ Î125
(m/min)rapid rate of drill spindle,slider and vises ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 2.5
4„€general capacity of motor(Kw) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 14.79
mill spindle motor(Kw)‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 5.5×2
drill spindle motor(Kw)‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 1.5×2
hydraulic motor(Kw) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 2.2
coolant motor(Kw) ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 0.09
5„€overall dimension(L×W×H)‚”ˆ‚”ˆ3600×2000×1800
6„€weight(kg)‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 6000
7„€working accuracy( if material is 45# steel)
runout of centerhole on OD ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 0.2mm
repeatability of two sides facing length‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 0.1mm
runout of two faces on centerline ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 0.05mm
repeatability of centerholes depths ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ 0.1mm
roughness of faces ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ Ra6.3
roughness of 60°taper of centerholes ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ‚”ˆ Ra3.2

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise