Advanced Search
Surplus Record


GEAR GENERATORS, For Bevel,Helical,Herringbone,Hypoid & Spiral Gears

Gleason #450HC Phoenix, 5-Axis, Fanuc 150M, wet & dry, 1996, (4) #17284

Request a Quote
Share
Gleason #450HC Phoenix, 5-Axis, Fanuc 150M, wet & dry, 1996, (4) #17284
EQUIPPED WITH:

Fanuc 150 MB
Hydraulic Work Clamping
Chip Auger
Chip Conveyor
Coolant System
Hydraulic System
Jib Hoist
Manuals

SPECIFICATIONS:

Largest Speed Ratio : 10:01
Work Area (continuous):
Largest Depth of Teeth: 15.24 mm
Largest Width of Tooth Face: 50.8 mm
Work Area (axles):
Horizontal Movement X Axis: -114 - 178 mm
Vertical Movement Y Axis: -178 - 190 mm
Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm
Workpiece Headstock Swivelling Range B-Axis: -3 - 90 Degree
Maximum Distance Machine Center to Spindle Side:165 mm
Number of Teeth: 5-200 inclusive
Max. Gear Pitch Dia. of Typical 35deg. Spiral Angle Gear Using
Max. Cutter Dia. 12" Cutter at the Following Ratios:
Face Milling --------------- Face Hobbing (210mm Dia. Cutter)
1 x 1 - 13.5" - 342.9mm ---- 10.560" - 268.22mm
2 x 1 - 16.0" - 406.4mm ---- 10.826" - 275.00mm
5 x 1 - 17.7" - 450.0mm ---- 11.810" - 300.00mm
Milling Head Diameter:
Helixact: 100,125,169,200,
250,320mm
Continuous gumption procedure, teichloroethylene: 102 - 210 mm
Workpiece spindle:
Drilling of Large Diameters : 5 3/64"
Cone Upward Gradient on 304.8 mm (1 foot): 21/32"
Deep One of the Cone: 5.29"
Diameter of the Whole Spindle Perforating: 3.35"
Speeds:
B-Axle Workpiece Headstock Drag Axis: 30 Degrees
A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1
X Axis Horizontal: 80 mm/sec
Y Axis Vertically: 80 mm/sec
Z Axis Carriage Baseplate: 80 mm/sec
Space Requirement L x W x H (Approx): 4.75 x 3.40 x 2.54m
188" x 134" x 100"
Machine Weight (approx): 10980 kg

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise