Advanced Search
Surplus Record


SAWS, BAND, HORIZONTAL (Also See Vertical Band Saws)

14" x 20" Hem Twister, high speed, 60-300 SFPM, clamping vise, 24" load tbl, clnt, #81323

Request a Quote
Share
14" x 20" Hem Twister, high speed, 60-300 SFPM, clamping vise, 24" load tbl, clnt, #81323
Inv #: 81323
(1) PREOWNED HEMSAW MANUAL HIGH SPEED PRODUCTION BANDSAW - MODEL TWISTER


SPECIFICATIONS
SAW: HORIZONTAL/SINGLE COLUMN/MITER
ARM HEAVY DUTY PRODUCTION BANDSAW

SAW CAPACITY: 14" HIGH X 20" FLAT @ 90 DEGREES
14" HIGH X 15" FLAT @ 45 DEGREES
14" HIGH X 10" FLAT @ 60 DEGREES
(MITER ONE DIRECTION ONLY)

ARM MITER: REMOVE LOCKING PIN AND ARM IS
MANUALLY MOVED TO DESIRED DEGREE
OF CUT - LOCKING PIN IS RE-
INSERTED IN HOLE AND ARM IS
MANUALLY LOCKED IN PLACE. EACH
HOLE IS SPACED 15 DEGREES APART.
DEGREES ARE READ ON A PROTRACTOR.

ARM LIFT: POWERED FROM CONTROL CONSOLE.

WHEEL SIZE: 18" DIAMETER WHEELS.

BLADE SIZE: 1-1/4" X 15'0" X .042" THICK

BLADE DRIVE: 5 HP., 220/440V AC, 3 PHASE,
1800 RPM, BALL BEARING TFC.

BLADE SPEED: INFINITELY VARIABLE SPEED DRIVE
60-300 SFPM

AIR REQUIREMENTS: 85 PSI, 3-5 CFM, EQUIPPED W/AIR
FILTER/LUBRICATOR

OPERATOR CONTROL: CONTROL CONSOLE IS LOCATED IN
FRONT OF SAW FOR OPERATOR CON-
VENIENCE. SAW MAY BE OPERATED IN
MANUAL MODE. MOTOR WILL SHUT OFF
AT THE END OF CUT AND THE ARM
STAYS IN THE DOWN POSITION.

MOTOR START INTERLOCK: CONTROL IS EQUIPPED WITH A SAFETY
FEATURE OF MOTOR START INTERLOCK.

CLAMPING VISE: MAIN CLAMPING VISE IS POWERED AND
IS NON COCKING

CUTTING PRESSURE: ADJUSTABLE CUTTING PRESSURE
0-800 LBS.

FEED RATE: ADJUSTABLE 0-3 INCHES/SECOND

CLAMPING PRESSURE: ADJUSTABLE 0-1,000 LBS.

BLADE GUIDE SYSTEM: SIDE AND BACK GUIDES ARE FLAT
CARBIDE INSERTS.

COOLANT SYSTEM: MACHINE IS SET-UP FOR FLOOD STYLE
COOLANT SYSTEM WITH 17 GALLON
CAPACITY.

SAFETY GUARDS: MACHINE IS EQUIPPED WITH BLADE
GUARDS AND AWARENESS BARRIERS FOR
SAFETY PURPOSES.

LOAD TABLE: 24" ROLLER LOAD TABLE IS PART OF
MACHINE BASE AND IS FULLY COOLANT
PANNED.

DISCHARGE TABLE: 24" SOLID PLATE DISCHARGE TABLE
IS PART OF MACHINE BASE AND IS
FULLY COOLANT PANNED.

WARRANTY: THE SELLER WILL REPAIR OR REPLACE
TO THE PURCHASER, UPON INSPECTION
ANY DEFECTIVE PART FOR A PERIOD
OF ONE (1) YEAR FROM DATE OF
SHIPMENT. (PARTS AVAILABILITY IS
IMMEDIATE.)

WEIGHT OF MACHINE: 3,000 LBS.


EQUIPPED WITH
- SHAFT DRIVEN POWER BRUSH ASSEMBLY
- FLOOD COOLANT SYSTEM


NOTE
* SPECIFICATIONS SUBJECT TO VERIFICATIONS *


Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise