Detailed Product Description
1 used de-installed SCOTCHMAN AUTOMATIC FEED COLD SAW 12\ 1/2",
5 HP,60 HZ, FLA 10, 3 PHASE
operating manual included
the info below is for information only
The CPO 315 HFA has a length tolerance of or- .006" on up to 3-1/2" diameter tube or pipe, up to 1-3/4" solid material and squareness tolerance of or- .002" per diameter inch. This machine uses a 12-1/2" blade and has the ability to cut pieces as short as 1/8" and as long as 90". This Hitch Feed saw uses a 30" index that can be run a maximum of three times.
Cold sawing is a process similar to a milling process. In most cases, this, combined with the variable speed feature, gives a finished cut that does not require any secondary machining or de-burring.
Since milling spindle speeds are used in cold sawing, there are several things that are required to achieve quality results. The selection of the proper pitch (number of teeth) on the blade and the proper spindle speed for the type of material being cut are critical. Proper material clamping and a good quality coolant are also important.
Cold sawing has several advantages over band saws and abrasive saws. Besides the mill quality cut, cold saws have the ability to generate faster cutoff times than band saws. There are no sparks and excessive noises that are associated with abrasive cutoff saws. There is no work hardening of the workpiece.
Cold saws also offer the advantage of blades that can be re-sharpened until the diameter of the blade will no longer cut through the material. The vise allows for easy changeover to special clamping jaws for profiles and extrusions. Having a motor variable speed control enables the user to cut a wide range of materials.
CPO-315-HFA-LT (11-177 RPM)
The coolant reservoir has a capacity of seven (7) gallons (26.5 liters
4.1 PHYSICAL DIMENSIONS
SEE FIGURE 1 ON THE FOLLOWING PAGE.
DIMENSIONS INCHES CM
A HEIGHT 65 "
B FLOOR TO VISE 38.5"
C BASE HEIGHT 35"
D VISE OPENING 3-5/8"
E VISE DEPTH 2-1/4"
F BASE WIDTH 61"
G BASE DEPTH 25"
H WIDTH 100"
I DEPTH 44"
About the Dealer
Asset Conversion Specialists focuses on buying and selling new and used equipment and materials, providing inventory and liquidations services to a broad base of industries, both national and international, plant closures. And, specializes in the electronic equipment; spare parts, machine shop-tooling, manufacturing equipment, office equipment and furniture, test electrical equipment, woodworking equipment, packaging equipment, computers, scrap recycling recovery and more.
|Products & Services|