Browse:  Machinery Electrical
RSS Blog Surplus Record
>
>
Rotary Tables, Cnc
TOOLING & ACCESSORIES:
ROTARY TABLES, CNC (Also See Rotary Tables, Manual)

ROTARY TABLES, CNC TOOLING & ACCESSORIES - Surplus Record
Wigglesworth Machinery 55000 sq. ft. of quality inventory
There are 41 listings in this category
File update: Tue, May 21, 2013 01:23
Advanced Search
 Sort by:
Original Sort

7.8" Centroid 4th Axis Rotary Table, 360 degrees in 2.7 Seconds   Show item detail rfq

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 () Bill Garbe

Haas HRT-210 CNC Rotary Table W/ Contol Box , 1998, Brush type sevro, 8.27" Face Plate, very little use.   rfq

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

8.8" SMW #RT-225VN Acu-Rock rotary table (2) Show item detail rfq

Roskelley Machinery Corp., Salt Lake City, UT 801-313-0707 (Fax 801-313-0717) Curt Roskelley

9" Haas #8RT, rotary table & controller,40'/lbs,torque,90:1 gear ratio,9"tbl,#74205   Show item detail rfq

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

9" Nikken, 4th & 5th axis, CNC tilt & rotate, Fanuc AC servo motors, 1993   Show item detail rfq

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

10" Tsudakoma #RB-250R, horizontal, Fanuc motor, 2007   rfq

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

10" Tsudakoma #RB-250R, 4th Axis CNC rotary table, Fanuc AC motor, 3000 RPM, hydraulic clamping, 2007, #147230   Show item detail rfq

Machinery Values Inc, Harrison, NJ 973-497-7600 (Fax 973-497-7501) Mark Piedmonte

12" High Performance Machine, CNC Precision Rotary Table, 3-1/4" Hole rfq

Gallery Of Machines, Marathon, NY 607-849-6028 (Fax 607-849-6000) Harry Hartman

12" Hiperdex, horiz/vert., full 4th axis indexer, .001 degrees, 3"hole, 1984 rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

12" Mitsui-Seiki #NCT320I, rotary table, 8.5"high, (8) T-Slots, 1997, #22671   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

12" Tsudakoma #300CTNCVR, CNC rotary table, #3085   Show item detail rfq

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

12" Tsudakoma Twin #RNCV-301 rfq

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

12" Tsudakoma, CNC Rotary Table, 8" 3-Jaw Chuck rfq

Gallery Of Machines, Marathon, NY 607-849-6028 (Fax 607-849-6000) Harry Hartman

12" Tsudakoma NC 4th Axis rotary table w/tailstock, 2005 rfq

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

12" Tsudakoma, Trunion type rotary table rfq

Gallery Of Machines, Marathon, NY 607-849-6028 (Fax 607-849-6000) Harry Hartman

12" Yuasa CNC Indexer #RFT-320, 12" 3-jaw, 4" hole rfq

Tooling & Machinery Of Texas, Houston, TX 713-699-8987 (Fax 713-699-8986) Sales Dept

12-1/2" Nikken, CNC rotary table, hyd.clamping, 4"spdl.hole, Fanuc, self contained hyd.system, #2173   Show item detail rfq

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

15.75" Tsudakoma, 6"hole, red cap motor, (3) available, optional Fanuc OM controller   Show item detail rfq

Industrial Surplus Inc, Berlin, CT 860-828-3541 (Fax 860-828-6747) Jack Guzewicz

16" Tsudakoma #RNCM-400R, Fanuc, tailstock, right handed rfq

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

19" Tsudakoma #RNCM500R, tailstock, steady rest, 1985, #19199   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

24" x 60" Angle Plate, T-Slotted, 2-sections, #22759   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

36" Giddings & Lewis #360C CNC, Contouring Rotary Table, 10000 lbs. Capacity   Show item detail rfq

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

40" Wisconsin #VHP/VGF, 52"sw,vert.,both hds.driven,program.,180 pos,Servo Dr.,#8448   Show item detail rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

42" Pratt & Whitney #M1881, CNC power rotary table, auto indexing   Show item detail rfq

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

60" Angle Plates, matched pair,170"H,54"F-B,3-sections,drilled & tapped,Cast,#22757   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

60" Angle Plates, matched pair,170"H,54"F-B,3-sections,drilled & tapped,Cast,#22758   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

72" x 72" Giddings & Lewis #360P, CNC infeeding,44000 lb.cap,48"infeed,2001,#19686   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

72" x 108" Giddings & Lewis, Hydrostatic,72"CNC ctrl,sub-slide,25500 part.wght,#8410   Show item detail rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

72" Giddings & Lewis CNC, pwr clamping,Fanuc AC Red Cap Servo drive,1976,#19763   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

98" x 137" Toshiba #BR25/35B CNC, 78"infeed,44000 lb.cap,ballscrew,CNC,'85,#21060   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

118" x 118" Toshiba #BR-30, 60 ton weight cap., 47"infeed, CNC, 1986, #21254   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

13' x 13' (4m x 4m) D-F #FD1000 CNC, 100 Ton table load capacity, Sizes up to 23' Show item detail rfq

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

Haas #HRT-9, rotary table, 17 pin connector, Haas Servo control, 1.5 HP   Show item detail rfq

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #TR160-2, dual spindle tilting 2-Axis Trunnion rotary table, 2005    Show Video of Item rfq

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Nikken Super Spacer Super Dex w/15 deg.increment 24 pos.index plate, 10 sec. rfq

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Rutland 10"indexer, index plates, brand new condition   rfq

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Tsudakoma #RB300K Big Bore, NC, 320mm table diameter, 2005 Show item detail rfq

Roskelley Machinery Corp., Salt Lake City, UT 801-313-0707 (Fax 801-313-0717) Curt Roskelley

Tsudakoma #TRNC-301, 12"4th & 5th Axis CNC rotary trunion tbl,+/-110°tilt,1995 rfq

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Yuasa #CPCX-600, 4-Axis,programmable rot.tbl,5C Collet,Yuasa CPNC-1 00 Servo Ctrl Box   Show item detail  Show Video of Item rfq

Naab Sales Corporation, Hopkins, MN 952-933-6755 (Fax 952-933-7229) J.Van Heuveln

Yuasa #DMTRT-170, 4th/5th Axis,170mm dia,high precision,UDNC-M2 prog.controller,2008   Show item detail rfq

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

CNC rotary tables, call for specs & prices, (3) in stock rfq

Gallery Of Machines, Marathon, NY 607-849-6028 (Fax 607-849-6000) Harry Hartman

Back to category listings.

Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search
Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise
Privacy Policy