Browse:  Machinery Electrical
RSS Blog Surplus Record

CNC MACHINERY & EQUIPMENT:
LATHES, ENGINE (SHAFT), CNC

 Daniluk Corp. a precision machine tool rebuilder since '82
There are 52 listings in this category
File update: Mon, Jul 28, 2014 01:20
Advanced Search
Sort by:
Original Sort
11" x 18" Acra #ATL-1118A, Anilam 4200T Teach ctrl, 2005, #33559 rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Fax 818-788-2470) Sales Dept.
16" x 40" Bridgeport Romi EZ-Path II, Anilam 4200 ctrl,3500 RPM,#4MT,1997,#11735 Camera rfq
Don Lewis Machinery & Equip, Thousand Oaks, CA 805-987-4160 (Fax 805-987-4170) Don Lewis
16" x 49" Harrison Alpha 400 Plus, Fanuc Teach CNC, 8"chuck, tooling Spec Sheet rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Fax 818-788-2470) Sales Dept.
16" x 49" Harrison Alpha 400 Plus, 16"sw,49"cc,2500 RPM,10 HP,tlstk,Fanuc CNC Ctrl,'97 Camera Spec Sheet  Show Video of Item rfq
R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce
16" x 50" Victor #1650ENC, Fagor 800TGI Controls, 2-1/8 Hole, 7.5 HP 3 & 4Jaw Chucks, Good Condition, 1998 Camera rfq
Northern Tool Co, Indianapolis, IN 317-638-2223 (Fax 317-638-2445) Steve Lee
16.5" x 40" Bridgeport Romi #EZ-Path, CNC lathe,DX32 EZ Path Ctrl,8" 3-Jaw chk,Dorian turret,8 HP,1994,#152686 rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
17" x 40" Milltronics #ML-17, CNC lathe,Centurian 6 Ctrl,9"3-Jaw chuck,1999,#152552 rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
17" x 40" Nardini Fast Trace, CNC lathe, Fanuc 20TA, 3-Jaw chuck, Dorian manual turret, 1997, #152859 rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
17" x 40" Nardini, flat bed,Fanuc 20T,10 HP,3000 RPM,10"3-jaw chuck,U/P,1999 rfq
Johnston Industrial Sales Co., Cleveland, OH 216-381-7701 (Fax 216-486-1641) C. Johnston
18" x 28" Lagun #GHT 4 Plus Geminis #720/3000, CNC lathe w/Teaching Ctrl, #90610 Camera rfq
BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson
18" x 60" Victor #1860-DCL, flat bed,Fanuc 20-T,2.05"spdl bore,10 HP,45-2500 RPM,'00 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler
19" x 60" Milltronics #ML28/80, 4"thru hole, Centurion 6 control, tailstock, 1999 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.
20" x 40" Romi #M-20, CNC lathe,Fanuc 21iT,3-Jaw 15"chk,Dorian,toolpost,2001,#151434 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
20" x 60" Dalian #CKE6150Z, F OiTD,10"chk,6 sta.pwr.trrt,2200rpm,3.2"bore,new,#80127 Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
20" x 60" Haas #TL-3, 1800 RPM,CSS,18HP,12"4-Jaw chk,tlstk,RT,SR,clnt,never used,2005 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green
20.47" x 45.08" Mori-Seiki #ZL-25B, CNC shaft type lathe,MF-D6 CNC,13.78"SOCS,35-3500 RPM,chip conveyor,good,1996/1997 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
21" x 80" Harrison Alpha #550, CNC toolroom lathe,Fanuc ctrl,12"chk,15 HP,Dorian post Camera Spec Sheet rfq
Machinesused.com, Minneapolis, MN 763-745-1166 (Fax 763-745-1140) John Lawton
21" x 80" Harrison Alpha Plus #550S, CNC Teach lathe,3.5"bar,1800rpm,Fanuc,#90605 Camera rfq
BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson
24" x 22" Mazak Nexus #QTN-250 II, 10"3-Jaw,tailstock,Mazatrol Matrix,2008,S33032 Camera Spec Sheet rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
24" x 22" Mazak Nexus #QTN-250 II, 10"3-Jaw,tailstock,Mazatrol Matrix,2008,S33034 Camera Spec Sheet rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
24" x 40" Clausing Metosa #CNC2240, 3.15"bore, 15 HP, 2500 RPM, 12"chuck, tailstock, Fagor, 2003, #HB-19877 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury
25" x 118" Toolmex #TUR630MN, Fanuc 0iTD + manual guide,4.1"bore,17"TRI-V bed,new rfq
Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob
25" x 157" Toolmex #TUR560/630AMN, Siemens 810D Ctrl, 5.5 H.I.S., 2005, #3351 Camera Spec Sheet rfq
Standard Industrial Machinery, Oxford, AL 256-831-1211 (Fax 256-831-2207) W Robert O'Neal
26.70" x 22" Mori-Seiki #SL-150/500, CNC shaft type lathe,MSC-500 CNC,17.90"SOCS,50-5000 RPM,chip conveyor,good rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
27" x 168" American #2514, CNC shaft type lathe,new Fanuc OTC or optional Fanuc 21iT,24"chuck,900 RPM,excellent,1970's rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
28" x 120" Geminis #CNC4-Plus, Fagor CNC,4 pos.turret,15"chk,1200 RPM,23 HP,1999 Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
29" x 74" Dainichi #M75x190, Fanuc 15T,FAPT Turn,3-1800rpm,17.5"4-jaw,8-pos.trrt,'90 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green
29.5" x 118" Hankook Protec #7NB3000,6.9"spdl bore,Fanuc 21iT,32 bit CNC,A/I trrt,'04 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards
30" x 154" Lodge & Shipley Numeriturn #NTH30/2516, Siemens 840,Fanuc 18iTB or surplus 16TB CNC,16.13"SOCS,6-jaw,'69,rblt 2011 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
32" x 80" Willis #3280-10CNC, 9.8"bore,front/rear chucks,6k RPM,30 HP,Fanuc 0iTC,'08 Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
33" x 168" Lodge & Shipley Profiturn #40, Fanuc 18T,25"chk,7"bore,steady,chip,#152715 rfq
Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi
33" x 236" Racer #RCM 6M, flat bed,Fanuc 18iTB,6-1000 RPM,4-pos.elec.tool changer,'08 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler
37" x 157" Haco #TUR930MN, 25"OCS,Fanuc 0iTD,8 sta.Disc,5.5"bore,Tri-V bed,new rfq
Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob
37" x 236" Toolmex Haco #TUR930MN, Fanuc,25"OCS,50HP,8 pos.trrt,24"TRI-V bed,new Camera Spec Sheet rfq
Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob
39.3" x 43.3" Mori-Seiki #SL-8, Fanuc OT,10.5"spdl bore,dbl chuck,60 HP,370 RPM Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler
40" x 72" L & S Profiturn #40 3220-25, shaft type,new Fanuc 18iTB,32"4-jaw chk,80's rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
40" x 132" Monarch #4025, CNC shaft type lathe,Fagor 8025/30 (recently retrofit),25"SOCS,28"4-jaw chk,steady rest,v/good,1968 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
41" x 197" Ryazan #RT755F3-577-1, Fanuc OT,Heidenhain scale,23"OCS,8 sta.trrt,'93 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards
43" x 157" Okuma, 9.5"hole, F&R 4-Jaws, OSP5000LG, 1000 RPM, 60 HP, 1990 rfq
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
45" x 76" American #4025/30, CNC lathe,50 HP,40"T-Slot face plate,750 RPM,Fanuc OT Camera Spec Sheet rfq
R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce
45" x 204" American #4025, heavy duty,600 RPM,chip conveyor,GE Fanuc 550,100 HP Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
45" x 315" Saint Elienne, shaft type,new Siemens or Fanuc 18iTT/18iT,26"SOCS,'83/'10 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
50" x 180" LeBlond #50/30 Raised 4625 NK Tape Turn I flat bed CNC roll lathe, Fanuc 18iT,33"SOCS,75 HP,rblt 2000 Camera rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
50" x 282" VDF Wohlenberg #U1270S, 100"x40"long gap,4"spindle hole,8 station turret Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Pearl Equipment Co, Nashville, TN 615-383-8703 (Fax 615-297-3463) Si Culp
53.50" x 237" Leonard Safop #60/600 Heavy Duty lathe, new CNC,37.75"SOCS,50"chuck,75 HP,2.5-310 RPM,excellent,1970's/2010 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
55" x 250" Herkules #WDK600, CNC shaft type engine lathe,new CNC,47"SOCS,45.30"chuck,powered tailstock,excellent,1970's/2010 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
56.25" x 320" Kramatorsk #1A66O.400, CNC shaft type lathe,DRO or full CNC,40.75"SOCS,49"chuck,pwrd tailstock,excellent,1989 Camera rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
59" x 162" Youngstown #50R, Siemens 840D or Fanuc,40"chk,4-Jaw,Ser.551,reblt.2010 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
63" x 216" Heyligenstadt #ND1-800/50, CNC shaft type engine lathe,49"4-jaw adjustable chuck,good,1971 rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
74" x 40' Betts, 65"c/s, 100 HP, RB w/Fagar 2012, 50 ton load, u-power rfq
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
80" x 236"/396" Poreba #TCG200,4-jaw chk,100 HP,40 ton,new elec.& Fanuc ctrl,remfg. rfq
Hanza International, Moorestown, NJ 856-608-9090 (Fax 856-608-0991) Mark Rubin
Viper #VT-21MS, Fanuc 21i-TB,20 HP,8000 RPM,sub-spdl,live tlg,2"bar cap,2006 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler

Back to category listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise