Used LATHES, COMBINATION, CNC: Machinery & Used Equipment For Sale

CNC MACHINERY & EQUIPMENT:
LATHES, COMBINATION, CNC

Largest PreOwned Haas distributor in the US

There are 965 listings in this category
File update: Sat, Jul 4, 2009 01:24

ORIGINAL SORT

Sort by Location
Sort by Date
Advanced Search

Accustar CNC Turning Machine, 20" x 42"

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Ajax Victor #TNS-2-3TFC CNC Lathe, Fanuc 3-TF, 570mm dia. swing over bed, 200mm dia.standard cutting, 1984

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Akebono #MINC-26, gang tool,1-1/16"spindle,9"X&Z travel,Fanuc OT,#dk17998

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Akira Seiki #SL20, Fanuc 0T,18"swing x 13"Z,chk & collet chk,6k RPM,TS,conv.,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Akira-Seiki #SL20, Fanuc OT, 6.5"chk., T/S,18"sw.,13"Z, 6K RPM, conv., 2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Akira-Seiki #SL25 CNC Lathe, Fanuc 0iTB,tool preset,parts catch,2006,#5999295

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Ameri-Seiki #T-208, 0iTC,8"chk.2.4"bore,20"sw,20"bc,5k RPM,12 trrt,mag.BF,2005

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Ameri-Seiki #T208, 20.6" swing, 8" chuck, 5000 RPM, 15 HP, 2005, #1398

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

American #4025-120, 32"chuck, 12.5"bar, 50 HP, Fagor ctrl, new spdl.drive, 1982

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

American #4025X60, Fanuc OTC, 40"sw, 2-axis,3.25" hole,31.5" 3-jaw,CC,78"BC,'96

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Auto Spin #AS3040 Spinning Lathe, 52"swing, 56"cc, 30 HP, 2003

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Binns & Berry Data 90, 33.5"x197",27.5"OCS,4-1/8"bore,1200 RPM,Fagor 8020TG,'90

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Bridgeport EZ-Path, 16.5"swing,2"dia.bore,40"BC,8"4-jaw chuck,3000 RPM

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Bridgeport EZ-Path II, manual/CNC flat bed lathe, 20"swing, 40"cc, nice

Hallidie Machinery Co Inc, Auburn, WA 253-939-9020 (Fax 253-939-9019) Scott Hanson

Bridgeport Romi, 16" x 40" EZ-Path, ASA A2-5 spindle nose, 1.97" hole, 3&4 jaw #8800

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Bridgeport Romi EZ Path, 16" x 40" collet closer, Aloria tool post, hand wheels, 1995

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Bridgeport Romi EZ Path II, 14"x 40", EZ Trac CNC control, 8 HP, IP/UP, 1996

All Machinery Sales Inc., Union Grove, WI 262-878-3736 (Fax 262-878-0368) Dave Buske

Bridgeport Romi EZ Path lathe, EZ Path CNC,16.5"bed,40"BC,8.6"OCS,2"spdl bore

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Bridgeport Romi #M7, Fanuc 21iT,2",17x43",8"soc,10hp,4-jaw,auto lube,'00,#101564

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Bridgeport Romi Power Path, 16" x 22", 12 tools, 15 HP, 6000 RPM, 1997

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Bridgeport Romi Power Path 15, 12 turret tools, 8"chuck, 15 HP, IP/UP, 1999

All Machinery Sales Inc., Union Grove, WI 262-878-3736 (Fax 262-878-0368) Dave Buske

Bridgeport Romi Powerpath 15, 8"hyd.chuck,3000rpm,12 sta.tur,CX32-CNC,1996

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Chevalier #FCL-1840, CNC lathe,18",flat bed,drum turret,conversational,tools,2006

Quest Machinery Company, Elburn, IL 815-544-9032 (Fax 866-628-1858) Jeff Foster

Chevalier #FCL1840, Anilam 1200T Plus, tailstock, 1997

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Chevalier #FCL2480, cnc lathe,24"sw.,80"cc,15"turn,12"3-jaw,Anilam 4200T Plus,'03

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Chevalier #FCL4080A, 40"swing,80"cc,7"big bore spindle,tailstock,CNC turret,2007

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Churchill, Fanuc 10T,25"swing,14"turn,3.7"spdl bore,30 HP,4k RPM,collet chuck

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Cincinnati #18S-60, Acra 900TC CNC,prog.tlstk,3"hole thru,28"sw,19"OC,22.5"x,63.5"z(24304)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati #20/12, 72"universal 4-axis,steady rest,tlstk,Acra 5,12"pwr.chk,1976

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Cincinnati #2216XIM Cinturn, Acramatic 950, 12 stations, 1988, #15322

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Cincinnati #300MT/1800, 22" sw, 50 HP, 3500 RPM, 12"chk, Acramatic 5X850 cont,'96

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Cincinnati Avenger #200MS, 850SX,live tools,sub-spdl,SMW BF,options,clean,1995

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Cincinnati Avenger #200MT, 8"chk,2"bar,2-axis,25 HP,chip conveyor,1994,#254079

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Cincinnati Avenger #200T, 8"chk,2"bore,20 HP,5k RPM,Acramatic,1994,#CK-17554

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Cincinnati Milacron Avenger #250MS turning machince, 3.15"bore, 2.62"hole, 14'bar feed (25802)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Milacron Avenger #250MS turning machine, 3.15"bore, 2.62"hole, 14'bar feed (25801)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Cinturion #75, Universal CNC Turning Center, 7.2"X, 24"Z axis,Fanuc 0i-Mate

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Cincinnati Cinturn #12C, Vickers Acramatic 2100 control, tailstock, 30" swing

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Cincinnati Cinturn #15UX80, Fanuc CNC,15"3-jaw,4"hole,80"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX100, Fanuc CNC,18"3-jaw,4"hole,100"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX60, Fanuc CNC,18"3-jaw,4"hole,60"cc,tlstk,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX80, Fanuc CNC,18"3-jaw,4"hole,80"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #2216C, 2-axis CNC Acra w/CRT,16"SMWK 3-J,actuator,1990 (22240)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Cinturn #28UX100, Fanuc CNC,28"3-jaw,6.5"hole,100"cc,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #8C, Acramatic 950,live tools,8"chk,30 HP,chip cnvyr,202 hr.

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Cincinnati Milacron Falcon 200, 20.86"sw.,9.84"max.cut,16.5"cc,40-4500rpm,15hp,'97

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Cincinnati Falcon 300, 25.5"swing,40"cc,3000 RPM,Acramatic 2100 CNC,40 HP,1997,#17187

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Cincinnati Falcon #300T, CNC lathe,26"x68",12"chuck,Acramatic 2100,1996,#s27065

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Hawk #150, ACC 2100, 8" chuck, chip, 2000

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Cincinnati Hawk #TC-250, 21"x 27",Acramatic 2100E CNC,2.8"HIS,1998,#s27339

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati #HTC 150 Hawk, Fanuc 21i,15.75"swing,tailstock,PC,tool eye,low hrs,'05

Haider Machinery Inc, Eden Prairie, MN 952-975-4975 (Fax 952-975-4977) Gary Haider

Cincinnati Talon #210, Acra 850SX CNC, 20" sw, tlstk.w/23.6" centers, chip conv, 1994

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Cincinnati Talon #210, Acramatic 850SX CNC,chip conveyor,tool presetter,1992,#15357

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Clausing Metosa #EL1340 CNC, Fagor control w/graphics & teach mode, 1997

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Clausing Storm #200B, GE Fanuc 0T, 10"chuck, 2-1/2", 1994

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Clausing Colchester Storm 80, Fanuc 21T,tailstock,6000 RPM,3-axis,1997,#1810

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Clausing Colchester Storm 80, Fanuc 21T,6"chk,16.5"sw,6.69"trn.dia,prgm.tlstk,'97

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Clausing Colchester Tornado 100, 16.5"swing,12 position turret,Fanuc OT,1994

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

CMZ #TBI-450, 8" chuck, 24" cc, tailstock, Fanuc OT

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax773-7250296) Paul Braeseke

Colchester Tornado 300 CNC Lathe, Fanuc 0-T, 350mm dia.swing, 300mm dia.cutting, 500mm max.length, 1995

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Colchester Tornado 300 CNC Lathe, Fanuc 0-T, 350mm dia.swing, 300mm dia.cutting, 500mm max.length, 1996

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Daewoo Puma #10, Fanuc 18T,19.7"swing,14.6"max.turn,tlstk,chip conv,10"chuck,1998

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Daewoo Puma 10"-2SP, Twin Spindle, Fanuc 16T, 1996 - 1998 (6) #5823

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Daewoo #10HC, Fanuc 18T,10"chuck,20"swing,3.4"bore,3500 RPM,12 ATC,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo #10HC, 10"chuck, Fanuc OT, 1996

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Puma #10HC, 10"chuck, Fanuc OT, 3"bar capacity, 3500 RPM, 1996

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Puma #10HC, Heavy Cut Fanuc 0T, 10" chk, 3" bore, new 1997, nice

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma 10S, Fanuc 0T, 12"chk, 3" bore, chip conv, mist collector, 1989

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #10S, Fanuc 0T, 12"chk, 3" bore, chip conveyor, mist collector, 1991

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #12L-B, 22.8"swing o/bed,40.2"turn.lgth,20-2000 RPM,12"chk,1995 (#218259)

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Daewoo Puma #12L-B,univ,22.8"sw,19"turn.dia,40.2"turn.lgth,20-2000RPM,11"chk,1995

American Industrial Services, Toledo, OH 419-867-1913 (Fax 419-867-1915) Jodi Filby

Daewoo Puma #12-LC, Fanuc OM,4.6"bore,22.4"swing x 42"cc,35 HP,15"hyd.chk,1996

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo Puma #12S, 12"chk,Fanuc 18T,gear box,22"sw. x 30"cc,3k RPM,3.5"bore,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo Puma #200, Fanuc 18I, 8" SMW-Autoblock Chuck, chip conveyor, mist collect

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #2000Y, Fanuc 18ITB, 8"chuck, live tooling, TP, PC, LNS QL

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Daewoo Puma #200C, Mits 520L,8"chuck,tailstock,chip conveyor,1997,#141822

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Daewoo #200LC, CNC lathe, 2001

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Daewoo #200LMSC, 8"chuck,live tlg,sub,full C-axis,Fanuc 18T,1999,#HB-17380

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Daewoo Puma #230B, CNC turning center,2-Axis,13.8"dia.turn,21"sw,21.6"turn lgth,23"cc,2.6"dia.bar,2.99"hole thru spdl,4500rpm

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Daewoo Puma #250MB, 3"bar,14"turn length,25"swing,10"chuck,presetter,3446 cut hours

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Daewoo Puma #300B, 2-axis, 12" chk, 3" bar, 3500 RPM,30 HP,Fanuc 21IT,2001 (8650)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Daewoo Puma #300C, 23"x36"cc,4"bore,12"3-jaw,chip,Fanuc 18-TC,35 HP,1999

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Daewoo Puma #300C, Fanuc 21iT,12"chuck,4"bar,tailstock,chip convyr,2001,#141883

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Daewoo Puma #400LB, CNC lathe,Mits.ctrl,14"x 84"trvls,MT #5 tpr,A2-11 nose,2000

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Daewoo Puma #400LMB, Fanuc 21iTB, 18"chuck, live tools, 50 HP, 5.2"spindle hole, 2006

Superior Machinery, Burt, MI 989-770-4827 (989-770-4873) Keith McKay

Daewoo Puma #400LMB, m/tcntr,sw.bed/cs 30"/23"x 84"cc,live tools,3-axis,4.5"bar,Fanuc 21iTB,2006

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Daewoo Puma #6HS, Fanuc 10T,17-1/2"swing,14"cc,1.25"spdl bore,6k RPM,chip conv.

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Daewoo Puma #8HC, Mitsubishi Meldas 500L ctrl,8"Kitigawa pwr chk,tool setter,'95

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Daewoo Puma #8S, Fanuc OT, 8" chuck, 1996, max.turning diameter 1" turning, 1.5"boring

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Puma #8S, 8"chuck, Fanuc OT, 2"bar cap., 12 station turret, 5000 RPM, 1996, fob:Mn

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Puma 8S, Fanuc OTC,19.7"sw,20.9"centers,5000rpm,tailstock,chip conv,'96

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Daewoo Puma #8S, Faunc 0T, 10" chk, 2", mist collector, transformer, 1994

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Lynx #200A, Fanuc 21T,12 ATC, 6" chk, tailstk, 10 HP,1.75" bar,5000RPM,1998

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Daewoo Lynx 200A, 6"chk,1.75"bar,20hp,6k rpm,12 pos.trt,Fanuc OiTB,'05, DK-18253

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Daewoo Lynx #200B, Mits M-50,S20 collet,2"bar,4500 RPM,SMW BF,chucker,clean,'99

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Daewoo Lynx #200B, Fanuc 21T,8"chk,12 sta.tur,tlstk,parts catcher,LNS BF,chip,'04

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Daewoo Lynx #200L, Fanuc 21T,18"swing,13.78"L,50-5000 RPM,prog.tlstk,chip,2004

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Daewoo Puma #MX2000ST,CNC lathe,29.5x53",8"chks,40atc,5k RPM,B-ax,'08,#s27717

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Daewoo #TT2500SY, 8-axis,Fanuc 18i,(2)10"chks,35 HP,42"cc,31.5"sw.,3.5"bore,'05

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo Puma #V10, vert, 15.7 sw, 10" chk, 15.7"X,11.8"Z, Fanac OT,25HP, 1997(6)

Lindoco Machinery, Morton, IL 309-256-1065 (Fax 309-263-1209) John McEllin

Daewoo Puma #V15-25P, Fanuc 18T,(2)21"chks,31.5"sw.,29.5"L,(2)12 ATC,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo Puma #V-15-3A, Fanuc 18T, 20"chuck, 12 ATC, live tooling

D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey

Daewoo Puma #V400, 24" sw, 18"turn.lgth, 12" hyd.chuck, 30 HP, 2006,Ref.#786105

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Dainichi #BX40M, turning/milling, Fanuc 15T, 8"3-jaw, 3.03"thru hole, 19.69"swing, (24985)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Dainichi #F20, Fanuc 18T, 17.7"swing, 9.8"turn.dia, tailstock, 8"chuck, 1997

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Dainichi #F250, Fanuc 21iT,10"chuck,3.39"bore,tailstock,3500 RPM,chip conveyor

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Dainichi #F-30, Fanuc OT,12"chk,3"bore,22"sw.x 50"cc,S/R,3500 RPM,12 ATC,'93

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Dainichi #F-30, CNC,12"chuck,3.1"bar,2-axis,25 HP,chip conveyor,tooling,#165674

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Dainichi #F30 cnc turning center, 1993

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Dalian #CKE6163, CNC Teach,24.8"x 118",Fanuc,21.6"bed wdth,4P auto index turret,New

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Deemor #750CNC, 31" sw, 98" centers, 10.23" bore, 25" chucks, Retro 2003, #15640

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

DeVlieg, 5",40 tools, 40"x 50" pallets, 80"x 60"x 40"x 24" tvls,3000 RPM,thru spdl.

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Doosan Dooturn #V5P VTL, 20.86" chuck, ASA A2-8 nose, 472 IPM, 1997 mfg, #1445

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Doosan Puma #2000Y, cool jet high pressure coolant, 2007, #5999634

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Doosan Puma #200SY, live tlng,C & Y-axes,2-5/8"bar,SMW brfd,10"3-jaw,Fanuc 18i,'06

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Doosan Puma #240B lathe, 8"chuck,12 turret,Fanuc 21,chip,super,2006

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Doosan Puma #240C, 10"chuck, 3"bar, 12 turret, chip, super, 2006

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Doosan Puma #300LC,OITC,12"ck,4.5"bore,24"sw,51"bc,2800rpm,12trt,35hp,chip,2008

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan Puma #600L, 21iTB,21"chk,6"bore,40"sw,120 BC,1800 RPM,12 trt,60 HP,chip,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan Puma #S700M, OITC,24"chk,5.2"bore,6"sw,6"BC,2k RPM,12 trrt,50 HP,2007

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan #S310, tailstock, parts catcher, tool presetter, chip auger,2005,Ref.#5999676

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Doosan #S390L, CNC lathe,Fanuc 21T,chip conv,22.8"swing,30"cc,3.5 bar cap,2001 (2)

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Doosan #S390L, Fanuc 18T, 30.3"swing, 30 HP, coolant system, chip, 12 tools

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Doosan #S390L, Fanuc 21T,12"chk,35"sw.x 40"cc,30 HP,4"bore,3500 RPM,2001

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Doosan #V550, vertical lathe,2 spindle,Fanuc 18TT,2 x 15"chucks,chip,1999

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Doosan #V850, vertical turn center,Fanuc 21i,2-axis,24"chuck,39.4"swing,50 HP,2007,#425

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Doosan #V850 CNC VTL,39.37" sw, 31.49" chk, ASA A2-11, 50 HP, 12-post, 2006,#1443

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Doosan #V850 CNC VTL, 39.37" sw, 31.49" chk, ASA A2-11,50 HP,12-post, 2005, #1444

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Doosan #Z340SM, 9-axis, Fanuc 18i-T CNC, twin turret, sub-spdl, live tooling, 2002

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Emag #VSC250 Twin Vert.Spdl.Turn.Cntr,10"chks,2-turrets,live tlg,Fanuc,2002 (4495)

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

Emag #VSC400, vertical turning center, 1997, #217746

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Emco Maier #ET-425MC, Siemens 810T,2 spdls,2 sub-spdls,1.1"BC,1996,installed 1998

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Emco Maier #340, 13.3"swing,30"cc,1.65"bar,Siemens 810 CNC,cheap,(2)avail.,#S25606

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Emco Maier Emcoturn #465DS 6-XR4B-V01-N37004,(2)12 pos.tur,7"3-JSmns840D,20hp(2)(24621)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Emco Maier Emcoturn #465MC, 6-axis,twin spdl,R4B-A03-M1003,Smns 840D 6-X ctrl,(2)(24620)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Emco Maier PC #Turn50, 1996, From School, our stock #10622

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Emco Turn #465DS, 6-ax, 2-spdl, 2-turret, live milling, c-axis, Siemens 840D, 1999 #15943

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Emco-Turn #465MC, 2 spdl,2 trrt,live mill,C-axis,gantry ld,Siemens 840D,'99,#15942

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Eurotech Elite #730SL, Fanuc Control,live tlg,sub-spdl, Bar Feed, xclnt

Sterling Machinery Ventures, Troy, MI 248-879-1989 (Fax 248-879-5501) Will Secor

Eurotech Force #8(ZPS-S50CNC), Fanuc 21iT, 12 sta.turret, 2-axis, LNS HYS BF, 2001

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Famar (Toyoda) #Ergo 210,multi-function,Siemens 840D,auto parts ld/unld,'99,#8536/7/8

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig

Feeler / EMI-MEC #FTC-180, CNC Lathe, Fanuc 0-T, 560mm swing, 165/210mm max.cutting dia., 380mm max.machining length, 1996

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Feeler #FTC180, 22" sw,20" centers,8" chk,2" bar,V8 turret,chip,Fanuc 0TC,1997,#18024

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Feeler #FTC180, 22"sw,Fanuc OTC,3-jaw hyd.chk,8 pos.trrt,35-3500 RPM,20 HP,'97

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Fax 631-467-8249) Ron Shuster

Feeler #FTC20, Fanuc OI CNC, 13.7" sw,8" chk,tlstk w/13.5" ctrs,25HP,4500RPM,new

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Femco Durga #25E, CNC lathe, with Mistbuster, 1993

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Femco #HL-15, Fanuc OT, 8" chuck, 12 pos. tur.,2.2" spdl.,parts catcher, chip conveyor, 4800 RPM, 1998

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Femco #HL15, Fanuc OTC, 2"bar, 8"chk, 12 pos.tur, 9.84"turn.dia, 1998

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Femco #WNCL35/110, Fanuc OT,12" chk. chip conv, coolant sys,tlg, full enclose,1998

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fryer #ET21, CNC lathe,21"SWOB,12"SWOCS,12"hyd.chk,8-pos.trrt,Touch 2000,#8308

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Fuji #ANS-40T, 23"sw.,12"chk,Fanuc 18iT,robot ldr,12 pos.trrt,3k RPM,'00,#7598

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Fuji #Fan, Fanuc OT,8"chk,gang style tooling,10 HP,15"X,13"Y,vert.tool slide

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Galaxy #TNL85T, 8"chk,2.2"spdl.hole,15 HP,5k RPM,Fanuc OT,holders,1998,#hb-17120

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Ganesh #7612TM, Fanuc Oi-TC,12"chuck,chip conveyor,tailstock,coolant tank,2007

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

G & L #15U, 12"chk,40 HP,updated AC spdl drive,G&L 800B ctrls,prog.tailstock,1980,stock #7853

On-Line Machine & Tool, Porter, TX 281-482-1771 (Fax 281-482-8956) Art Trainer

G & L #15UX72" CNC lathe, Mitsubishi Ctrl., drives, remanuf.1994 by Daniluk Corp.

Chapman R & D Inc, Arkansas City, KS 620-442-5881 (Fax 620-442-7747) Ray Chapman

Giddings & Lewis #21TT, 21"chuck,7"bar,2-axis,60 HP,twin turrets,1979,#281212

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Giddings & Lewis #40C, 22.5" x 33", Fanuc 15T & 10T, 3.5" hole, 40 HP, 1991

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Gildemeister #CTX twin spindle, Grundig Eltro Pilot CNC, 1996

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Gildemeister #CTX400 Serie 2, CNC lathe,Heidenhain Pilot control,C-axis,3-jaw powered chuck,12 station turret,tailstock

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Gildemeister #CTX420 Linear V3, Siemens 840D, 2-1/2 Bar Cap., 2002

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Gildemeister #GAC-65, Lathe, 2.56"bar cap., 8-axis, Iemca feed, 1994, #S26655

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Gildemeister #GMX200 Linear, CNC Lathe w/Tool Changer, 2005

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Gildemeister #MF twin spindle, Siemens Sinumerik CNC,9.44"swing,31.49"cc,'88/'98

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Gildemeister Twin #65Y, 840D,2.6"bar,(2) 5k RPM,24 live tool stations,C&Y-axis,2003

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

Graziano Twin 70Y, lathe,2.5"bar,5k RPM,(2) 12 sta,live tls,Fanuc 18iT,C&Y-axis,'01

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

H.E.S. Somault #400, CNC turning center, Fanuc 6, 12 tools, 58-3200 RPM, 1981

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Haas #HL-1, loaded with options, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-2, priced right, clean, 1995

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-2, 8"chk,20"swing x 24"cc,4k RPM,20 HP,conv.,tlstk,tooling,2"bar,'97

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #HL-2, Haas control, 8"chuck, tailstock, chip conveyor, misc. tooling, 1997

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #HL2, Combination Lathe, tailstock, chip auger, tool setter, 1998

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Haas #HL-2, Servo 300 bar feed, 8" chuck, 20" swing, A2-6 spindle,1998,Ref.#5999608

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #HL2 CNC Lathe, New 1998

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #HL-4, very good condition, 1997

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-4, 24" sw, 40" cc, 10" chk, 12-pos.turret, Haas CNC, rigid tap,1996,#16335

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #HL-4, 10"chuck,24"swing x 39"cc,3400 RPM,30 HP,12 ATC,3"bore,conv.,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #HL-4, Haas CNC, 24"swing, 14.5"max.turn, 38"cc, chip conv, 10"chuck, 1996

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #HL-5, 15"Chuck, 4", 19 ATC, 17"X, 44"Y, 40 HP, 2400 RPM, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Haas #HL-6, gear box, loaded with options, 1997

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-10, Intuv Progm.parts catch, preset, tlstk, chip conv, color mntr, 3-jaw & 5c, 07

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Haas #SL-10T, 6-1/2" chuck, 6000 rpm, 1-3/4" bar cap.,15 HP, 12 pos. tur.,options, 2007

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Haas #SL-10T, 6.5"chuck, 1.75", 13", 2002, #60012

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #SL10T, 2002, 6.5" chuck, 6000 RPM, 12ATC, tailstock

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Haas #SL-20, Big Bore, tailstock, high P-Cool 300 psi, 2004, #785020

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL20, tailstock,servo bar 300,tool setter,8"chk,auger,24"centers,2000,#786857

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL20, tailstock, setter, 2"bar, 8"chuck, auger, 4k RPM, 2008, #5999631

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL-20, 8" 3-jaw chk,prog.tlstk,10 st.trrt,Haas BF,chip aug,tl.preset, clnt,'05

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Haas #SL-20APL, 2.5 BB,8"chuck,24"centers,conveyor,t-setter,2007,#5999572

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL-20T, like new condition, 10 spindle hours, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-20T, Haas control,Servo 300 barfeed,2"bar cap.,4000 RPM,tailstock,2005

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Haas #SL20T, 2"bar,8"chuck,24"cc,tailstock,t-setter,p-catcher,aug,2005,#5999573

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL-30, CNC lathe, 2003

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #SL30, 10" chuck, 34" centers, 3.03" spindle bore, 30 HP, Haas CNC, 2004

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Haas #SL30, 12"chuck, tailstock, tool setter, high intensity lighting, 2006

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Haas #SL30, lathe,tailstock,tool setter,belt conveyor,HT gear box,2005,#786840

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL30, 10" chk, 3400 RPM,30 HP,3" bar cap,TS,chip,parts catch,tool pres,2008

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Haas #SL30 Big Bore, 12"chuck, 30 HP, tailstock, tool setter

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Haas #SL30BB, 4" bar, A2-8 taper, MT4 tailstock, chip conveyor, 2006, #8797

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Haas #SL30BB, 30"swing x 39"cc, 4"bar,2400 RPM,15"chuck,30 HP,2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #SL-30BB Big Bore, (2) 18"chucks, tooling, priced right, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30T, gear box, loaded with options, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30T, CNC lathe,10"chk,30"sw.over bed,30 HP,programmable tailstk,2005

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Haas #SL-30TB, 15"chuck,3.5"bore,30 HP,3400 RPM,gear box,30"swing,2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #SL-40, Cobination Lathe, 7" bore, 44" center, 55 HP, 2006

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Haas #SL40BB, 18"chuck,7"bore,40"swing,52"BC,1400 RPM,10 trrt,55 HP,chip,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Haas #SL-40BB Big Bore, (2) 18"chucks, tooling, loaded, low hours, 2005

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-40L, 15"chuck,4"bar,25"/40" x 80"cap,40 HP,chip conv,unused,2009

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Haas #SL40L lathe, 18"chk,89"cc,4"thru hole,55 HP,steady,Haas CNC,2006

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Haas #SL40T, 40" x 51", Combination Lathe, 2006

Two Spade Machinery, Bellows Falls, VT 802-376-8157 () Tobin Demos

Haas #TL-2, CNC combo tool room lathe, 16" x 48", 2007

Two Spade Machinery, Bellows Falls, VT 802-376-8157 () Tobin Demos

Haas #TL-25, CNC turning center, 2007

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Hankook Dynaturn #17, 67" x 315",4-pos.turret,60 HP,steadies,Fanuc 21T,2008,#18744

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hardinge #8/52-SV, Fanuc OT,8"chk,12 ATC,18"swing x 16"Z trvl,2"bar,5k RPM,'06

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge #CHNCII, Fanuc OT,14"swing,8"sw. OCS,12"cc,1-7/8"spdl.hole,8 sta.tur.

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Hardinge #CHNCIII, 1-5/8"cap,10 HP,5k RPM,8 pos.turret,Fanuc 18T,'95,#tk18068

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #CNCI, 1-5/8"cap10 HP,5k RPM,8 pos.trrt,6"3-jaw,Fanuc OT,'92,#pg-18173

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Cobra 42, 6"chuck,tailstock,chip conv.,Fanuc 21TB,collets,v/good,1998

Cap Machinery Corp, Auburn, MA 508-832-8555 (Fax 508-832-4142) John Capuano

Hardinge Cobra 42, Fanuc 21T, 16C collet nose, 12-position turret, 6k RPM

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Hardinge Cobra 65, 2-1/2", 10"3-jaw, Fanuc 21iT, 15 HP, 4500 RPM (2)

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Cobra 65, CNC lathe, 21" swing, 2.5" bar, 10"X-axis, 31"Z axis, 1998

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Hardinge Conquest 42, 19.5"sw,17.5"cc,5000 RPM,10 HP,Fanuc OTB,16C collet,'92

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hardinge Conquest 42, slant bed,1-5/8",Fanuc OT,tlstk,10 HP,5k RPM,'88,#dk-17799

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Conquest #42, 1.625"bar,10hp,5000rpm,11"X,14"Z,12sta.turret,GE Fanuc,'88

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Hardinge Conquest #42, GE Fanuc OT,16C collet tlstk,chip conv,part catcher,1989

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge Conquest #GT27, Fanuc 18T,Har-Matic BF,1-1/16"bar,gang type,conv.,'99

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge Conquest #T32 Big Bore, slant bed,2"rd bar,13.75"turn dist.,#3MT,15 HP,(24395)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Hardinge Conquest #T42, Fanuc 18T,6"chuck,milling,sub-spindle,tooling,1997

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hardinge Conquest #T42, 2-axis,12 pos.trrt,Spego 16'barfeed,chip,Fanuc 18-T,1995

Holt Equipment, Hopkins, MN 952-938-2202 (Fax 952-945-9917) Wayne Mader

Hardinge Conquest #T42, 4-axis, live tooling, Fanuc 18T dual turret, chip conv.

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hardinge Conquest #T42, Fanuc 18T, live tool, subspindle, Spego barfeed, 1999

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hardinge Conquest #T42, Fanuc 18T, live milling, sub-spindle, bar feeder

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Hardinge Conquest #T-42, live tools/sub-spdl,1-5/8"bar,6k RPM,barfeed,mint,2001

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Hardinge Conquest #T42, Fanuc 18T,12 sta.trrt,live tool,sub spdl,C-axis,LNS BF,'00

Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman

Hardinge Conquest #T42BB, 16C,21"sw,13.5"cc,4400rpm,2"bar,full C-axis,Fanuc 18T,'96

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Hardinge Conquest #T51, Fanuc 0T-C,3-axis,26"x23",4200rpm,8"chk,2"bar,chip,'94

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Hardinge Conquest #T51, 10"x22",12 pos.turret,4200 RPM,no control,1993,#s27754

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hardinge Conquest #T51BSP, 2.5"bar,25C cllt,10 pos.trrt,Fanuc 18T,sub,'99,#dk-18361

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Conquest #T51-SP, CNC lathe,10"x 23",2.5"HIS,4200 RPM,Fanuc OT,#s27738

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hardinge Conquest #VT100, vert, 12"chk, Fanuc 18TB,20 HP,3400 RPM,'99,JV-16512

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #CS42 Conquest, 19-1/2" swing, 5000 RPM, GE Fanuc OT ctrl, 1988 (8360)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Hardinge Elite #42M, 1.625"bar,12 pos.trrt,tlstk,C-axis,Fanuc 21iTB,'08,#dk18375

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Elite #II6/42, 1.625"bar,12 pos trrt,tlstk,C-axis,Fanuc 21iTB,'05,#dk18376

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Emag, inverted spdl.vert.turning ctr,36HP,12 sts, 50-4500 RPM,(2), #1425-26

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hardinge Emag, inverted spdl.CNC vert.turning ctr, 10.3" turn dia., (2), #1427-28

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hardinge Emag #VL5, invt.spdl.VTC,Fanuc 18iT cnc,10.3"chk,2362 ipm,4500rpm,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge Emag #VL5, Fanuc 21iT,10.3"turn,auto pkup styl.auto part ldr,4500rpm,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge Emag #VL5, Fanuc 21iT,10.3"max turn,auto part load,live tlg,4500rpm,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge Emag #VL5, invt.pdl, Fanuc 18iT,10"chk,4500rpm,from Aerospc,low hrs,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge #GS-250, 10"chk,slt bed,3"bar,25 HP,tlstk,26.62"Z,Fanuc OiTC,'07,#dk18363

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #GT27, gang tool, 11.76" sw, 1-1/16"bar cap, 6000 RPM, Fanuc 18T,1996(8375)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Hardinge #HC, chucking,12"sw.o/bed,6"sw.o/cross slide,14"spdl.to turret,#18414

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

Hardinge Quest #10/65LT-CY,lv tlg,c-axis,sub,2.5"bar,Fanuc 16iT,brldr,'02,dk17916

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Quest #8/51, lv.tlg,sub, Y,2" bar,Fanuc 16iT,4-operating hrs.,'06,DK-18385

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Quest #851SP, GE Fanuc 16i-T,lv.tlg,20C spdl,16C sub,C&Y axis,chip,brfdr,'00

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #RS150, 6"Chk, 2"br, 12 trt, 6K RPM,20HP,Fanuc I,under 50 hrs,'07,DK-18389

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #SR300, 8"chk, 2"br,30HP,tlstk, 12 trt,Fanuc 21iT,undr 50 hrs,'07,DK-18397

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #SV200/66, 8"chk,2.6"bar,25HP,4K RPM, slt.bd,tlstk,undr 50 hrs,'08,DK-18387

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #T42, 20C collet, with milling & sub spindle, Fanuc 18, barfeed, 1994

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Hardinge #T-42SP, 3-axis,ram turret,1-5/8",Fanuc 18T,10 HP,5k RPM,1993,#hb-17684

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #T51, 20C,2"bar,20 hp,tlstk,Fanuc OTC,lots tl.hdlrs,collets,'96,#dk18049

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #VT100, 27"sw, 15-3/4"turn.dia, 12 sta.trrt,tlstk,20 HP, 1997-2000 #7345-47

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Harrison Alpha #400 Plus, flat bed CNC lathe, 16" x 48", Fanuc control, 1999

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

Harrison Alpha 400 Plus, 16"/23"x 50"cc, GE Fanuc, CSS, 10 HP, 1998

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Harrison Alpha 400 Plus, Fanuc CNC,16"swg,10"o/cross,49"cc,flt bed,mpg hd whls,'00

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Harrison Alpha 550, CNC, gap,1800 RPM,21"x84",hard ways,S/R,chuck,1997,#53460

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

Hessapp #DVH450 Vertical,Lathe,17.7"sw, 50 HP, Indramat CNC, in plant, 1998, #S25617

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hitachi-Seiki #23J, 10"chuck,24"Z,chip conv.,Yaznac J300 ctrl,hyd.tailstock,1997

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Hitachi-Seiki #4NEII-600 CNC Lathe, Fanuc 3-TF, 580mm dia.swing over bed, 600mm max.machining length, 1984

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Hitachi-Seiki #CS20, Seicos 21l, 8.25" chk, 2",51"X,3.75"Z,30-50000RPM,2000

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Hitachi-Seiki #CS20, Fanuc 21iTA,10"chk,2",51"X,3.75"Z,30-50k RPM,westch cnvyr,'99

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Hitachi-Seiki #CS25Y, Seicos 21l,10"chk,16"sw,4k RPM,25 HP,.001 C-axis,Y-axis,2001

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hitachi-Seiki HiCell #20, C-axis,Y-axis,12 ATC,8"chk,Seicos L,chip conv,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi Seiki HiCell #23, CNC lathe,15.7"swing,24"centers,8"chuck,V12 turret,Seicos L3,1995,#18191

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hitachi-Seiki HiTec #20, 8"chk,17"sw.,13"cc,15 HP,3600 RPM,GN/Fanuc 10T,excellent (3)

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Hitachi-Seiki Hi-Tec #20SII, Seiki-multi control,microcentric collet,3"spindle

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hitachi-Seiki HiTec Turn 20SII, seicos, 8"chk, 2", 1988

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Hitachi-Seiki #HT200, 26.7"sw,12 pos trrt,tlstk,2.55"bar cap,Seicos PCflexi,'04

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley

Hitachi-Seiki #HT20SII, CNC lathe, 1990

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Hitachi-Seiki #HT20SIII, Seicos 8"chk, tool probe, parts catch, toolstock, 1996

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Hitachi-Seiki #HT20SIII, 2-axis,8"chk,5k RPM,20 HP,tlstk,Seicos LY CNC,graphics,'97

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Hitachi-Seiki #HT23SII, Seiki Multi,10"3-jaw,KV turret,tooling,tailstock,1996

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Hitachi-Seiki #HT23SII, 10"chk,10 sta.trrt,prog.tailstock,chip conv.,20 HP,1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-seiki #HT23SII, 3"thru hole, 2.5"bar dia, 15"swing, 10"turn dia, 2-x (25741)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Hitachi-Seiki #HT25S, Seiki Multi,20"x 24"cc,2-3/4"bore,10"3-jaw,chip,1994

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Hitachi-Seiki #HT-25S, CNC turning center,Fanuc GN10,10"3-jaw chuck,tailstock,1986,#BR4009

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Hitachi-Seiki #HT40G, CNC combination lathe, 1996/97

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Hitachi-Seiki #TF25, 10"chk,40"cc,Seikos 10L Multi CNC,10 sta.trrt,25 HP,'97 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hwacheon #240ASMC, Fanuc, 8" chk.main sp, 6" chk.rear sp, 5K main,6K rear,2007

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Hwacheon CNC Turning ctr, live tooling, 15.7" SOB, 15.7" turn.lgth, 8" chk, #1429-30

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hwacheon Eco-5VN-2SP, Fanuc 18T,(2)15"chks,32"sw.,27.5"L,30hp,A2-11,(2)12 ATC,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hwacheon Hi-Eco #10E, Fanuc 0T, 7"3-jaw, turret, tailstock, 15 HP, 6000 RPM, 2000 (2)

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Hwacheon Hi-Eco #35, lg.bed, 23.6"sw, 50"cent, 12" chk,Fanuc 0TC CNC, 1997,#16543

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hwacheon Hi-Eco #35, 23.6" sw, 40" cent, 12" chk, 4" hole, Fanuc 0TC, 1997,#16544

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hwacheon Hi-Tec #200A, Fanuc 21TB, 2", tailstk, chip conv,robot intrf, 2001 (6) avail.

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Hwacheon Hitech #200A, lv.tlg, Fanuc Oi-TC, 20"sw, 8"chk, tlstk w/20"ctrs,2004

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hwacheon Hi-Tech #200A, Fanuc oi-T,6"chuck,50-5k RPM,3"bore,15/20 HP,2001

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Hwacheon Hi-Tech #300M, high rigid & productive turning centre, Fanuc 18i-TB,C-Axis,600mm sw.o/bed,380mm max.turning dia,2007

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Hwacheon Hi-Tech #310L, Fanuc 18i,24"sw.x52"cc,3200rpm,10"chk,12atc,3.5"bore,'04

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hyundai #HIT-18, Siemens 840D,17"sw,20"centers,10"chk,4000rpm,tlstk,chip conv,'02

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Hyundai #HIT-18S, CNC turning center,Siemens 840C,17"swing,11"hole,1996

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hyundai #HIT18S,17"x20",10"chk,3.15"HIS,36-3600rpm,Sinumerik cnc, 1998,#s27527

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hyundai #HIT18S, CNC lathe,Siemens 840C,17"sw,2.5"hole,chip conveyor,1996,#8294

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Hyundai #HIT-20M, C-axis,live tooling,10"chuck,chip conv.,Siemens,25 HP,1999

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hyundai #HIT250C, OITC,12"chk,3.2"bore,23"sw,25"BC,3k RPM,10 trrt,25 HP,chip,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hyundai #HIT30S, horizontal lathe, 12"chuck, 2-axis

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hyundai #HIT400, gang type turning center

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Hyundai Kia #SKT21, cnc lathe,21.7"sw,16.14"mach lgth,4k RPM,12atc,Fanuc 0iTB,'05

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Hyundai Kia #SKT250MS, CNC lathe,24.4"swing,10"chk,8"sub chk,Fanuc iTB,'05

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Hyundai Quick-Turn #8N, CNC lathe,6"chk,12"cc,6k RPM,15 HP,Mazatrol T-32B,'95

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Hyundai #SKT400M, OITC,12"chuck,4"bore,30"sw,47"BC,3k RPM,12-trt,40 HP,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hyundai-Kia #SKT460, CNC lathe,21"chuck, Fanuc 21ITB, 62"centers, 2008

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Ikegai #FX25Z, chucker,Fanuc 6T,2-1/2"bar capacity,8 station turret,30 HP,1985

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Ikegai #TC26K, Fanuc 18iT, gang tool, 4000 RPM, chip conveyor, 2005

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Ikegai #TCR25Y, Fanuc 0T,Y-axis and live tooling, full C-axis spindle 25/30 HP

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Ikegai #TU15, Fanuc 18i-T, 2"bar capacity, chip conveyor, 1999, #9970

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Index #ABC, CNC lathe, 1996

Graff-Pinkert & Co, Oak Forest, IL 708-535-2200 (Fax 708-535-0103) Lloyd/ James

Index #G200, CNC lathe, 1996

Graff-Pinkert & Co, Oak Forest, IL 708-535-2200 (Fax 708-535-0103) Lloyd/ James

Index #V200, vert.chucker,5" chk, 12.7" sw, C-axis, live, 7500 RPM, gantry, 1999

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

Index #V200, 2-axis vertical turning center,Fanuc 16T,8"pwr chuck,14 pos.turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Index #V200, Index C200-4 CNC ctrl,10.5"sw,7.87"turn lgth,T-slot tool tbl,1998,#22878

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Index #V200 CNC turning lathe, Index C200-4,16.54"swing,7.87"turn dia.,20.47"X,7.87"Z (3)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Index #V250, 2-axis vertical turning center,Fanuc 16T CNC, 12 position turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Johnford, 61" x 137", 43" swing, 250 RPM, 4-pos turret, 50 HP, Fanuc OT CNC, '94, #18283

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Johnford #SL-300, Fanuc OiTC w/man.guide,4500rpm,20hp mtr.,8"chk,12-sta.turr,'05

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

Johnford #TC20C, 16.53" swing, 20.47" length, live tooling, bar feeder, 1998

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Johnford #TC20C, Fanuc OT, 8" chk, 2.6", live tlg, barfeed, tlstk,1998, #745

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Johnford #TC3, Fanuc OT, 12" chuck, 30" centers, chip conveyor, new 1998

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Johnford #TC50, Fanuc OT, 12.6" max.turning, 3000 RPM, 12-position turret, 1996

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Johnford #TC50, Fanuc OT, 12.6" max.turning, 3000 RPM,12-position turret,1996

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Jones & Lamson #4512 Combi,Fanuc OT,5.25"hole,1200rpm,40hp,rblt/retro '02(11319)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Jones & Lamson #4518, 18"chk,4.5"bar,2-axis,50 HP,2 turrets,heavy duty,'90,#293687

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Jones & Lamson #TNC1036 CNC Chucker

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Kia #4NEII-600, 10"chk, 24"cc, Fanuc 10TF, tlstk w/prgmbl.quill,3150RPM,tlg,1989

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Kia #Kit 30A, CNC combination lathe, gang type, Yasnac LX3, 1995

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Kia #Kit 30B, Fanuc 0i-TA, 6.5"chuck,1.81"hole,15.75"X,9.84"Z,30-6k RPM,2001

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Kia #KIT30A, Fanuc OT CNC, 18.9" sw, 6"chk, gang tooling,1.5" bar cap, 1996

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Kia #KIT30B, gang type 2-axis, 18.89" sw, 6.5" hyd.chk, 6000 RPM, Fanuc OI, 2001

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Kia #KT15, 6" Chuck, Yasnac LX3, 1994

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Kia #SKT100, tool pre,Fanuc,collet,6"turn dia.,6k RPM,13"centers,2005,#5999535

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Kingston #2SC,Fanuc 10T, 18" sw, 11" lg, 1-11/16" bore,8" hyd.chk,chip conv,#7794

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Kingston #TJ-1650, 8"chk, 7.5 HP, D1-6 spdl., 2.125 spdl.hole, 3 speed, 2003

Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield

Kingston, CNC lathe, 26"x 80"F-bed, 4.7"hole, 3-jaw power, Fanuc, 1998

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Kitako #VT4-200, Fanuc 18i, 10"swing, 4 spindle, 8"chucks, 4000 RPM, 2000

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Lansing 'G' CNC Lathe Model NV-30

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Leadwell #GTC20, Fanuc OT, barfeed, 15 HP, 1993

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

Leadwell #LTC10AP, Fanuc OT, 6" 3-jaw, tailstock, 12 sta,4500RPM, chip conv,1995

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

Leadwell #T5, w/Fedek DH65 bar feed, Fanuc 0I, 2006 (2988)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T5, w/Fedek DH65 bar feed, Fanuc 0I, 2006 (2988)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T7, 8"chuck,2"bar,20"sw,20 HP,4500 RPM,tlstk,Fanuc OTD,'98,#hb17863

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Leadwell #T7, w/Fedek DH65 bar feed, Fanuc 0I, 2006 (2986)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T7, w/Fedek DH65 feed, Fanuc 0I, 2004 (2987)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T7, w/Fedek DH65 bar feed, Fanuc 0I, 2006 (2986)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T7, w/Fedek DH65 feed, Fanuc 0I, 2004 (2987)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T8 CNC, 26" sw, 3" bar cap.,12" 3-jaw chuck, Fanuc 0I4TB cont, 2004

Ellison Tool Co Inc, Baton Rouge, LA 225-929-9900 (Fax 225-208-1995) Keith Ellison

LeBlond #3220X120, 32" x 120", 4" bore, 18" 4-jaw chuck, 2 SR, Delta 40 CNC

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

LeBlond #50/30 Raised 4625NK Tape Turn I, F-18iT,50"sw.,30"/33"OCS,7-1/16"spdl hole

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

LeBlond #5029NK Tape Turn I, Fanuc 18iT,50"swing,29"OCS,7-1/16"spindle hole

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

LeBlond Makino Baron 60,Fanuc GN6,32"sw,20"trn,A2-11,72"cc,50hp,2K rpm,'83,#5150

Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Ron/John/Jake

LeBlond Tool & Die Maker, 2400rpm,1.5 hole,Acu-rite DRO,Hardinge spd.chk,thrd.dial

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Marathon #SL-500, OT-C,24"x64",4.01"bore,60 HP,12 tools,tool eye,S/R,tlg,1994

Bradley Machinery & Valuation, Houston, TX 713-302-7087 (Fax 713-465-9522) Skip Bradley

Mazak #200M/250M, milling,tool holders only, (13) available

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #610 Multiplex, Mazatrol T32,Twin spdl, live tlg,13.78"sw,1.65"bar cap, '93

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mazak Dual Turn #20, Fusion, 12.6" sw, 4750 RPM, 2 x 10" chks, chip conv,2004

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak Dual Turn #20, T-Plus,(2)8"chk,2.4"bore,(2)4k RPM,(2)12 trt,(2)eyes,chip,'92

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Dualturn #20, (2) 8" chks,2-turrets,Mazatrol Fusion 640,chip conv,2000

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak Dualturn #20N, T-Plus,(2)8"chks,2.4"bore,(2)4k RPM,(2)12 trt,2 eyes,chip,'97

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Dualturn #20R, 640PRO,(2)8"chucks,3"bore,(2)4k RPM,(2)12 trrt,(2)30 HP,'06

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Dualturn #20R, 640PRO,(2)8"chucks,3"bore,(2)4k RPM,(2)12 trrt,(2)30 HP,'05

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #E650HS2/3000U, Matrix,(2)18"chks,6.69"bore,(2)1600 RPM,60 HP,80 ATC,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #INT200IIIST, Mazatrol 640MT Pro control,8"upper/lower chuck,2006,#786864

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak Integrex #100HSY, PRO640,(2)6"chucks,(2)6k RPM,(2)c-axis,10k RPM rotary,'04

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex #200IIISY, 640T,(2)8"chk,2.9"bore,5k/5k RPM,(2)C-axis,12k RPM rtry,'04

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex #200Y, Fusion 640MT,C-axis,B-axis,Y-axis,CTS, 8"chk,tailstk,'98

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak Integrex #300IIIST, 640T,10"/10"chks,3.46"bore,4000/4000 RPM,.001 C-axis,'04

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex #300SY CNC Turning & Milling center, 24" sw, 35-3000 RPM, #1457

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mazak Integrex #30Y, Mazatrol T-Plus,12"chk,3.46"bore,40 ATC,7.26"Y,60"BC,1997

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Mazak Integrex #30Y/1500, T-Plus,12"chk,3.46"bore,20"sw,60"bc,3500rpm,40hp,40atc,'97

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex #35Y/1500,T-plus,12"chk,3.4"bore,22.5"sw,60"BC,3k rpm,40hp,80atc,'98

Machinery Inc, Sherbrooke, PQ 819-346-2369 (Fax 819-346-5217) Raynald/Stephen

Mazak Integrex #400II-Y/1000, Y-axis CNC lathe, Mazatrol Fusion 640,3K RPM,2001

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mazak Integrex #400IVS-1500U, 12" main, 10" sub, x,x2,y,y2,b,c axes,835 hrs,2007

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak Integrex 400SY, Fusion,24" sw,60" cut lgth,6000 RPM rot,GL300 gantry,2000

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak Integrex #400SY, Fusion 640MT,12"chuck,gantry loader,chip conv,2000

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mazak Integrex #400SY, sub,swg/cut 24",40"z,live tools,40 ATC,7-axes,12&10"chucks,Fusion 640MT,2000

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak Integrex #40Y-ATC CNC Lathe, Mazatrol T-32-2 control, tailstock, 1992

Superior Machinery, Burt, MI 989-770-4827 (989-770-4873) Keith McKay

Mazak Integrex #50-Y, turning/milling center,60"univ.,28"sw,24"chk,80 tool,#8211

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Mazak Integrex #50-Y, turning & milling center, 60"universal, 1997

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mazak Integrex #50Y, 100"cc, 120 ATC, 15"chk, Maz. T-Plus, steadyrest,1997

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak Integrex #50Y/2500 univ, swg/cut 28",100"cc,live tools,120 ATC,XYZC-axes,15"chuck,T-Plus,1998

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak Integrex #50Y-2500, 100"cc, 120 ATC, 15" 3-jaw chuck, SMW Steady, T-Plus, 1998

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Mazak Integrex #50Yx2500U, 28"x100",120 ATC,live mill,steady rest,Maz.T-Plus,1998

Sterling Machinery Ventures, Troy, MI 248-879-1989 (Fax 248-879-5501) Will Secor

Mazak Integrex #E410HS, Pro,(2)15"chks,3.46"bore,24"sw,53"btwn spdls,40 ATC,'02

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #M4, Fanuc CNC, 15"air chk, 4"hole, 60"cc, tlstk, remfr, 1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak #M4, 22"sw, 3-1/8"hole,13-2200 RPM, 20 HP, Mazatrol T-1, 12" 3-jaw, ID #12157

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak #M4, 22"sw,3-1/8"hole, 13-2200 RPM, 20 HP, Fanuc 6T,12" 3-jaw, id #12128

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak #M-4, 15"chuck,T-32 ctrl,21"cut.dia.,60"centers,8D/6B turret,1990,f#786309

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak #M4, Fanuc 6T, 4-1/2" spdl. bore

G & S Machine Company, Dayton, TX 936-257-9984 (Fax 936-257-8891) G. Farrell

Mazak #M4/1000, 22" swing x 40" centers, Mazatrol T Plus CNC control, 1997

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mazak #M4/1000 CNC Lathe, Fanuc 6TB, 15"chk, 22"sw.x 40"centers, 1982 (5)

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mazak #M5, Fanuc CNC, 18"air chk, 5"hole, 82"cc, tlstk, remfr, 1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak #M5, 2500 Mits.ctrl, 24"x 96", 6.5" bore, 19.5" chk, steady rest, #26891

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #M5-1500, Maz T-Plus, Combination Lathe, 15" chuck, chip conveyor, #28132

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #M5-3000, Fanuc CNC, 12" chk, 5"hole, 120"cc, tlstk, remfr, 1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak #M5N/2500, 640T,20"chk,7.1"bore,24"sw,100"BC,1k RPM,6/8 trrt,eye,chip,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Micro Slant 15, 6"chuck,1.75"bar,2-axis,15 HP,good condition,1984,#281213

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Mazak Multiplex #420, T-Plus,8"/8",2.4"bore,5000/5000 RPM,12/12 trrt,chip,1995

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Multiplex 610, T-32-6,2-6"microcentric chks,live tlg,cut-feeder 80,'93

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mazak Multiplex 610, 6.29"turning, 13.77"swing x 5.11"cutting length, 1991

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mazak Multiplex #6100Y, Turning Center,Mazatrol fusion,6K rotary tool RPM,chip,'07

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Mazak Multiplex #620, Mazatrol, 8"chuck, 2", 4000 RPM, chip conveyor, 1988

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mazak Multiplex 6200, GL-100 ldr,chip conv,(2)8"chks,(8)rotary hds,tool eyes,'99

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak Multiplex 6200Y, Fusion,2"bar,live tool,Y-axis,bar fdr,PC,chip,loaded,'99

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak Multiplex #6300Y, 640T,12"/12"chucks,3.4"bore,3000/3000 RPM,12/12 trrt,'01

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Multiplex #630N, T-32,12/12 chucks,3.4"bore,3k RPM,12/12 trrt,C-axis,1993

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Multiplex #650R, 640T,18"/18"chk,3.4"bore,2000/2000rpm,10/10 trt,'07 GL500 Gty

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Nexus #QT250, CNC Turning center, 2-Axis,13.78"dia.turn,24.02"sw,20.76"turn lgth,25.31"cc,4000rpm,12 pos.tur,tlstk,2004

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Mazak Nexus #QTN200MS, Matrix,8/6"chk,5000/6000RPM,12 trt,C-axis,6000 rotary,'07

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Nexus #QTN250M, 10"chuck, 3"bar, 24"sw, 35 HP, live milling, barfeeder, 2006

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Mazak Nexus #QTN-350II, Matrix, 4"bar,12"chk,46"L,40hp,12 tools,3300rpm,tlstk,'07

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak Nexus #SQT100MSY, 640Y,6"/5"chk,6000/6000rpm,12 trt, .001 C-axis, 2007LNS BF

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Powermaster, 34"max.swing over bed, 2-750 RPM, Fanuc 5T, 60 HP, #14021

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak Powermaster #1600, 34" sw, 38" max.dia.of work, 2-750 RPM, 60HP,#14501

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak Powermaster 4000, 34"sw,157"cc,9.75"spdl,24"chk,Mazatrol CNC,1982,#16264

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak Powermaster Big Bore #PM1500 Univ, 9" bore, 63" centers, SMW air chucks, 1981

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Mazak #QT12C lathe, Flex GL-50C robot, 15.75"swing, 4000 RPM, 1994

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Mazak #QT15 lathe, 8"chuck, tailstock, Mazatrol T-Plus, tooling, 1995

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak #QT15N, 20 HP lathe,8"chk,chip,12 sta.turret,20"swing,20"cc,1989,#786154

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak #QT15N, univ.CNC lathe,sw/cut 17"/10",2"bar,19.6"cc,8"chuck,20 HP,4.5kt32b CNC,$25k, 01/1992

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #QT15N, univ.CNC lathe,sw/cut 19"/14",2"bar x19.6"cc,8"chuck,20 HP,4.5kt32b CNC,$25k,10/1992

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #QT15N, CNC lathe, 17"x 20", 8"chuck, Mazatrol T32-2, 1992,#s27045

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #QT15N II, Maz T-Plus,Lathe, 8" Chuck CC, Tool Preset, 1995, #27875

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #QT18N lathe, Maz T32,2.75"bar cap,17"sw,B/F,20 HP,3600 RPM,C.C.,1993

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #QT18N lathe, T-32B CNC,10"chk,chip conveyor,parts catcher,20 HP,1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #QT20, CNC Lathe, 8" chuck size, 8-turret post., T-Plus CNC control, #1441

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mazak #QT20 lathe, Mazatrol T2, 10"chuck, 40"cc, 3.15"bore, 1985 [74620]

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Mazak #QT200 "Quickturn", 20"x 21",Mazatrol 640T,8"3-jaw,tailstock,12-pos.turret,#A2-6 nose,#25908

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Mazak #QT20HP, T-Plus,10"chk,3.1"bore,17"sw,20"BC,4500 RPM,8-trrt,20 HP,chip,'97

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #QT20N, T-Plus,ATS collet chk,p/catcher,T/S,20hp,preset,chip conv, 1998

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron/ Matt/ Chuck

Mazak #QT20N, T-32 cont, 20 HP, tailstock, chip, 10-tools, 1986

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Mazak #QT20N, Mazatrol T-2, 10" chuck, tailstock, 3000 rpm, chip conveyor, 25hp, 1986

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

Mazak #QT20N, T-Plus,8"chuck,20 HP,20"swing,2.4"bore,tool eye,conv.,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #QT20N, Chucker, T-Plus,8"chk,2.4"bore,17"sw,5000 RPM,8 trrt,eye,chip,1997

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #QT-250, 23.6"swing,50-5000 RPM,20 HP,Fusion 640T,12 pos.turret,bar feed,2001,#18357

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #QT250, 8"chuck, 5000 RPM, Fusion 640T, tailstock, chip conv, clean, 2000 [21768]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Mazak #QT-25L, T-Plus,2.75"bar,10"chk,12.6"max.dia.,48"L,12D/24P tools,25 HP,'99

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak #QT30N, universal, combination lathe, 12"chuck, 39.7"cc, Mazatrol T Plus CNC, 1995

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mazak #QT30N-BB,T-Plus,12"chk,4"bore,20" sw,40" BC,2500 RPM,16 trt,eye,chip, 1997

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak #QT350, 26"x 48", 4.4"hole in spindle, PC Fusion 640T, 2002, #s27361

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #QT350, Fusion 640T CNC,15"chk,4.4"bore,26"swing x 48"cc,probe,prog.TS,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #QT350/125 univ.CNC lathe,sw/cut 26"/15",3"bar,48"cc,12"chuck,35 HP,2.5k,Fusion 640T,2002

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #QT350/1250, Fusion 640T,3.5"bar,12"chuck,swg/cut/cc25.9"/15.7"/47.6",12 tools,35 HP,tailstock,2002

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #QT-6G, CNC lathe, 1998

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mazak #QT-6T, Flex 6 gantry loader-unloader,T-Plus,turret,chip,low hrs.,1997

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mazak #QT8N, Mazatrol T32B, 6"chuck, 12 pos.turret, 6k RPM, 1992, #S27845

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #QTN250, 640T,10"chk,3.4"bore,26"sw,22"BC,4000 RP,12 trt,eye,chip,2006

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak #QTN250MS, 4k RPM,3"bar cap,10"chk,Maz Matrix ctrl,213 psi tsc,chip,'07

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak #QTN350/1250, 640T,15"chk,4.4"bore,26"sw,51"BC,2500 RPM,24 trt,eye,chip,'04

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak Quick Slant #20,4-axis,Cam T-4,15"sw,20"cc,collet chk,LNS,12'6 port BF,'86

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Mazak Quick Slant #20U, 4-axis, Mazatrol T-4, LNS bar feed, 1986

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak Quick Slant #30, Cam T-4 control, 4-axis, 10"chuck, chip conv., 1986

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Mazak Quick Turn #15N,17.32"sw,4500rpm,2.01"hole,20hp,Maza.T32-2,8"3-jaw,#12141

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mazak Quick Turn #20 , 8"chk,20"centers,5k RPM,20 HP,Mazak Mazatrol T-Plus,'97

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mazak Quick Turn #25, slant bed, 30 HP, Mazatrol CAM T2, chip conveyor, 1988, #15368

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak Quick Turn #35N, 20" x 60", Mazatrol T32 control, 1992, #S27840

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #SL40N-GL400, Gantry robot,18"chuck,T-Con,high pressure coolant,1998

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak Slant #15, Fanuc 6TB,3500rpm,3-jaw chk,collet nose,tlstck,chip convyr,'83

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

Mazak Slant #50N/2000, T-Plus,21"chk,7.1"bore,32"sw,81"bc,1500rpm,15trt,eye,chip,'98

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak Slant Turn #40N, CNC lathe,Maz.T-1,60"cc,12"chk,live tooling,chip conveyor

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Mazak Slant Turn #40NATC M/C, CNC lathe, 80"centers, Fanuc 11T, 1989, #79996

G & S Machine Company, Dayton, TX 936-257-9984 (Fax 936-257-8891) G. Farrell

Mazak Slant Turn #60, CNC combination lathe, 30"chuck, 2-axis, 40 HP

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Mazak Slant Turn #60/2500, Fanuc 6T,24"3-jaw,coolant,steady,chip conv.,1983

Morris Rezman Machinery Co, Chicago, IL 312-829-2510 (Fax 312-829-1281) Jeff Rezman

Mazak Slant Turn #60/2500, 6TB,6.5"bore,36"sw,100"BC,1k RPM,15 trrt,steady rest

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Slant Turn #60N, T-32-2,5.5"bar,28"chk,60 HP,1k RPM,15 tools,tlstk,chip,'91

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak #SQT-10, 10 HP lathe,T-32-2 CNC,11.8"sw.,11"L turn,6k RPM,probe,conv.,'93

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #SQT-10M, T32-3,live tools,17"sw,18"cc,5k RPM,bar feeder,parts catcher,'94

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Mazak #SQT-10MS, T-32 ctrl,1.65"bar cap.,live tooling,barfeed interface,sub-spdl

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mazak #SQT15, T32, 2.4" bore, 20" sw, 23"BC,4000 RPM,12 trt,25 HP,chip,1993

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak #SQT-15M, 3-axis,21"sw,live milling,C-axis,Mazatrol T-Plus,1997,#16658

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #SQT18, 10"chuck, 12-turret, tailstock, tool set, conveyor, nice, 1993

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Mazak #SQT18, CNC turning center, 10"chuck, tailstock, chip conveyor, 1993

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mazak #SQT200, lathe,20.7"x21",8"hyd.chk,2.4"HIS,5k RPM,Fusion 640T,'01,#s27219

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #SQT-200MS, 20.67"swing, 35-4500 RPM, 25 HP, Mazatrol T-Plus CNC, 1998, #18356

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #SQT250M, PC Fusion 640T,10"chk,20"sw.x 25"cc,C-axis,live tools,12 ATC,'01

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #SQT250M, PC Fusion 640T,10"chk,26"cc,2.5"bar cap.,21"sw.,4k RPM,25 HP,'01

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mazak #SQT-250MSY, 2.5"bar cap,live tools,Y-axis turret,sub spindle,tooling,2000

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Mazak #SQT-250MSY, Fusion 640,2.5"bar,10"chk,25 HP,4k RPM,12 tools,APC,chip,'00

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mazak #SQT250S, Fusion 640, sub-spindle, chip conveyor, 2000

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak #ST40N, Lathe, 21.6"x 60", 3.5"bore, Cam T-2 CNC, in plant, #S26918

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #ST80U-4000, 42"x 161",9.75"hole,300 RPM,80 HP,Fanuc 11T,1988,#s27719

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #ST80U-4000, 42"x161",80 HP,10/5 turret,9.75"spdl.hole,Fanuc 11,#s27724

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Methods Slant #50, Yasnac LX-3, 10"chk, 2.5"bar cap., tailstock, chip, 1994 (2)

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Methods Slant #50, 2-axis, 20"sw,40"cc,collet chk,3000RPM,20HP,Yasnac, 1995 (8221)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Metosa, GE Fanuc Oi-TC CNC Control, Metosa Smart 225 (2957)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Mighty Viper #VT4A, Fanuc 18iTB CNC, 2100 RPM, 18" chuck, 2006

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mighty #VT-8, gang type, 7"swing, 6k RPM, 1"bar, Mits Meldas 64, 2001

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mighty Viper #VT17L, Fanuc OT, 8"chuck, 12 sta.turret, tailstock, chip, 2005

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mighty Viper #VT40A, 2100rpm,39.37"swing,32.28"turn dia,37.6"L turn,Fanuc 21TB,'06

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Millport Smartlathe Z, 17"x40",Centroid ctrl,3-3/8"hole,tooling,like new,2005

Roskelley Machinery Corp., Salt Lake City, UT 801-313-0707 (Fax 801-313-0717) Curt Roskelley

Milltronics #ML14, 14"sw.x 40"cc,Centurian V CNC,8"chuck,2000 RPM,5 HP,1997

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Milltronics #ML16, Combination CNC Lathe, 2008

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Milltronics #T-17A, 12"chk,2"bar,2-axis,10hp,8 pos.tur,tlg,2-1/8"spdl.hole,1995

Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield

Mitsubishi #M-T35E, 35mm, 6-spindle, cross slide, CNC pick-off, Fanuc 15TT

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Mitsubishi #M-T42E, 42mm, 6-spindle, cross slide, CNC pick-off, Fanuc 15TT

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Mitsubishi #MTC10B, Meldas 325LGV,23.6"x 41.2"cntrs,used 4600 hr,'99 (9)#8845-56

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Mitsubishi #M-TC15, Lathe, 20"x 41",chip conv,tailstk,Meldas CNC,1993,#s27573

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mitsubishi #M-TC8B, 2-axis,8"chuck,tailstock,chip conv,15 HP,Meldas ctrl,nice,1994

Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Fax 248-543-7004) Kimball R Roberts

Mitsubishi #M-TC8B, 8"chuck, 15 HP, tailstock, chip conveyor, Meldas, 1994

R T Machinery Sales Inc, Troy, MI 248-743-9700 (Fax 248-743-9702) Bob Tesch

Miyano #34S, CNC,1.5"bar,2-axis,10 HP,collet nose,sub spindle,1991,#165673

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Miyano #ANC45S, Multi-Task Turn CNC Turning Center

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Miyano #ATS45S, CNC lathe,8"chk,1.75"bar,3-axis,Fanuc OT,SMW BF,hi-pres.clnt,'89

CNC Machine Sales, Orange, CA 805-279-0409 (Fax 805-672-0303) Ross Maehl

Miyano #BNC-34A, Fanuc 0T, 1-5/16", 6-position turret, 1988

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Miyano #BNC34C, Fanuc 0T, 1-5/16", 5C collet chuck, tailstock, 1992

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Miyano #BNC34T, Fanuc OT,4.5"chk,1.25",LNS bar fd,twin turret,prts.catch,'90 [642]

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Miyano #BNC-34T, Fanuc OT,sub turret,B-axis,5k RPM,Grindley barfeed,clean,1988

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #BNC34T, CNC lathe, barfeed, 2-turret, Fanuc, video

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Miyano #BND-34C, 1.31"bar capacity, 7"turning length, 2 turrets, Fanuc 0TTC, 1994, #18161

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Miyano #BND34S2, Fanuc OT, Lexair magazine BF,p/ conv.,p/catcher, sub-spdl,1990

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron/ Matt/ Chuck

Miyano #BND34T2, live tooling, Fanuc OT, LNS Hydrobar feed, 1994, #7911

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Miyano #BND34T2, Fanuc OT, live tooling, LNS Hydro bar feed, 1994

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Miyano #BNE34S3, 1-3/8", Fanuc, (2) turrets, sub-spindle, live tooling, 1999

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Miyano #BNE-51SY, Fanuc 18,8-axis mill/turn,U/L turrets,Iemca 551 BF,mint,2005

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #JNC45, 18.5" x 18.5", Fanuc control, stk # 76013, 2-available

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Miyano #JNC-60, Fanuc OT, 10"chk, 2-5/16"cap.bar feed, chip conveyor, 1992

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Miyano #LE-22, lathe,2"bar,4k RPM,live tls,Microcentric,parts catcher,TS,Fanuc OT

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Miyano #LE22, Fanuc OT control,collet chuck,parts catcher,tailstock,live mill,1996

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Miyano #LE22B, 2-axis lathe,12 sta.,live tooling,C-axis,BF,Fanuc 18T,1996 (2)

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

Miyano #LG3L, Fanuc 21T, 3 HP, 6000 RPM, 1.968", .826"thru hole, 1996, (22)

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Miyano #LP21, Combination Lathe, chucking center, Fanuc 18-TB, #82551

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Miyano #LR-01R, Fanuc 21iT,live tools,auto load/unload,6k rpm,12 pos trrt,mint,2004

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #LZ01R, 2.76"work dia,12-pos turr,auto pt.load/conveyor,Fanuc 21iT,2001,#18029

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Modern Challanger #BNC2680XXL, Fagor 8055TC,15"chuck,6"bore,26"sw,82"BC,2008

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Monarch Ultra Center,Fanuc 15TT,26"sw,63-3200rpm,twn.hdstk,15"ck,25hp,'93(5376)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Monarch Ultracenter, Fanuc 15,opposed 15"chucks,live twin turrets,1993 (2)

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Monforts #RNC3 Slant bed CNC lathe, Fanuc 15-T, C-Axis & driven tooling, LNS Quick load short magazine barfd, 420mm swing,'95

Apex Auctions, Naperville, IL 630-718-9804 (Fax 630-718-9805) Jeff Kopp

Mori-Seiki #AL-20, Fanuc OT Mate,8"chuck,19.7"cc,chip conveyor,1990 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #AL-20BTM, 18.9"swing,9.8"max.turn,19.7"cc,40-350 RPM,10 HP,2.2"hole,'90

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori-Seiki #CL15, Yasnac MSC603, (X,Z)9.25"x 12.2",6K RPM,1.3"bar,10hp,chip,'97

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #CL153, MSC-803,20.28"swing,1.69"hole,9.25"X,12.20"Z,6k RPM,#7779 (2)

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Mori-Seiki #CL-200B, 20"swing, 8"chuck, MSG-803 control, 2001

Noll Machinery Inc, Cleveland, OH 216-332-1870 (Fax 216-332-1873) Fred Mervis

Mori-Seiki #CL-200B5, 8"chk,2-1/2"bar,2-axis,15 HP,lots of tooling,chip conveyor,complete manuals,excellent,1999

Winslow's Machine Tool Sales, Lexington, TN 731-614-1296 (Fax 731-968-8976) Don Winslow

Mori-Seiki #CL203B/50, MSG803,tlstk,8"chk,2.8"bore,18.5"sw.x 22"cc,3500rpm,10atc,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CL25, MSC-521 Mori/Fanuc control, 12"chuck, very nice, 1998

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Mori-Seiki #CL253A, MSG803 w/Mapps,chk,12 ATC,20"sw. x 19.7"Z trvl,3.1"bore,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CL-253B, MSG803 ctrl,12"chuck,17"t.dia.,4"bore,chip,2001,#786489

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #CL25A, Fanuc 18T,20.5"sw. x 24"cc,2.4"bore,10 ATC,tlstk,4k RPM,'95

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CL25A, combination lathe,Fanuc 18T,10"chuck,3k RPM,2.6"bar cap,chip conveyor,1996

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #CS-250, Seicos 21L, 10"chuck, 2004, (2) available

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #CS250, Seicos 21L Fanuc,15.7"sw.x51"X,inverted spdl,4k rpm,25hp,'04

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #DL-150, 1997

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #DL150Y, MSCV 518, 1-3/4", 16.5"swing, live tools, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mori #DL151Y, Fanuc 18TT, 6"chucks, Y-axis, twin spindle, live, loaded, 2000

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Mori-Seiki #DL151Y, twin spdl CNC lathe,7.8"max lgth,16.5"sw.,12 trrt,Fanuc 18,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mori-Seiki #DT20, (2) 8"chks, 2-turrets, Fanuc 16T, Toellner loader, 2002

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mori-Seiki DuraTurn #2050, MSX504III,8"chk,2.9"bore,24"sw,22"sw,4k RPM,12 trrt,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #L100H, Fanuc OT,1.3"bar cap.,barfeed,4k RPM,16 pos.trrt,sliding hdstk.

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mori-Seiki #LL7B/3500, 16T,24"chk,8.4"bore,42"sw,144"bc,750rpm,4/6 trrt,steady,'01

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #MT-2000a1SZ Gantry, Fanuc,2.5"bar,8"chk,40"L,120 tools,4500rpm,'04

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mori-Seiki #MT2000S, milling,Y-axis,sub.spdl,40ATC,33"x 40",2.9"bore,20HP,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #MT2500SZ, CNC lathe,MSX-501T,60 ATC,sub spindle,60"cc,unused,2005

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Mori-Seiki #MT25B, 3-axis,Fanuc MF-T6,10 pos.trrt,ind.mill spdl,16"hyd.4-jaw,'96

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Mori-Seiki #MU45/40, CNC turning center,32"x 20"x 24"tbl.trvl,under 10K hrs.

Global Machine Brokers LLC, Thomaston, CT 860-484-4449 (Fax 860-484-4452) Joseph Wihbey

Mori-Seiki #Nl1500, 6"chk,tlstk,tool prestr,2.4"hole,6k RPM,36.4"swing,2004,#DK18305

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Mori-Seiki #NL1500MC, Mit,2"bar,6"chk,15hp,12 tools,6k RPM,milling,chip,tlstk,'04

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mori-Seiki #NL2500, gantry load,14"max.dia.,3.1"bar,10"chk,34.7hp,4k rpm,chip,'95

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Mori-Seiki #NL2500, CNC lathe,MSX-850III control,live milling,sub spindle,chip conveyor,barfeed,2004

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mori-Seiki #NL2500/700, MSX850w/MAPPS,10"chk,36"sw,31"cc,4k rpm,3.58"bore,'04

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #NL2500/700, MSX-850, 10" chuck, 3", 2004

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #NL2500S-MC-700, slant bed,sub-spdl,4-axis,FMB barfeed,2006,#08376

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Mori-Seiki #NL2500SY/700, live tooling, 4-axis, sub, 2006, #5999641

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #RL253, MSG-803,(2) 10"chucks,LG-10 gantry loader,chip conveyor,2000

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mori-Seiki #S-25MC, Fanuc 0T,live tool,C-axis,8"chuck,tailstock,chip conv,1991

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mori-Seiki #SL15, Fanuc 10T,17.7"x23.4",12 tls.VDI,6" 3jaw,2" hole,6000rpm,chip,'89

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Mori-Seiki #SL-15, Yasnac LX-3 control, 6"chuck, 12 station turret, tailstock, 4500 RPM

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mori-Seiki #SL15, 2-axis lathe, 12 sta., TS, 6000 RPM, chip, MF-T6 control, 1994

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

Mori-Seiki #SL150SMC, MSC-501 CNC,24"sw,collet chks,2.2"bore,12 sta.trrt,'97,#4290

Midwest Machinery Inc, Franksville, WI 262-895-3462 (Fax 262-895-3463) Rick Reichardt

Mori-Seiki #SL150Y, MSC-518 ctrl,1.7"bar cap.,collet chk,6"3-jaw,tooling pkg,'97

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mori-Seiki #SL150Y, 4-axis,6"chk,1.77"bar,10 HP,live tlng,Y-axis,chip convy,'97

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Mori-Seiki #SL-154, 1.6"bar,26.8"swing,16.9"turn dia.,presetter,tool mngt,barfeed,2002

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #SL200SMC, MSC-518 ctrl,live tlg,sub-spdl,Iemca VIP70 barfeeder,'99

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Mori-Seiki #SL200SMC, lathe,2"bar cap,15HP,4K rpm,MSC501,8"chk,chip,all manuals,'97

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #SL-200SMC, 5-axis,8"chk,2.06"bar,15 HP,Iemca VIP70 BF,live tlg,1999

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

Mori-Seiki #SL204, SMC CNC, w/sub spindle & live tooling, 8"main/6"sub chuck

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mori-Seiki #SL-25, CNC lathe,Fanuc OT,20.5"swing,10"chk,tailstock w/20"cc,1995

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mori-Seiki #SL-25/500, turning center, Moric 6TF, 1993

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mori-Seiki #SL250B/500,Fanuc 18T,2.87"bar,10"chk,20hp,3500rpm,10 tools,chip,'98 (2)

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale/ Tim

Mori-Seiki #SL-253B/500, MSG-500, 10"chuck, 3", 2001

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #SL253B/500, MSG500,10"chk,26"sw.x24"cc,3.4"bore,3500 RPM,conv.,'01

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL253BMNC,MSG501,MAPPS,10"chk,3.1"bore,C-axis,27"x 22",3500rpm,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL25A5, CNC, 20.47"max.sw.over bed, 42-4200 RPM, 20/15 HP, #13467

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #SL25B, CNC, 20.47"sw.over bed, 35-3500 RPM, 20/15 HP, #13466

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #SL25B, MF-T4,20"sw.x 24"cc,10"chuck,3500 RPM,3.1"bore,conv,1991

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL-25Y, MF-T6 control,C & Y-axis, live tools, chip conveyor, 1992

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Mori-Seiki #SL-2A, 10"chuck, 1.5"bar cap., 2-axis, 20 HP, 1982

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Mori-Seiki #SL-2AH, 1.5"bar cap., 2-axis, 20 HP, 1984

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Mori-Seiki #SL303, Lathe, 28"x 64", 3.4"bore, Fanuc MSG501, 2002, #S27025

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL303B700, CNC lathe, 12"3-jaw hydrulic chuck, 2002

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #SL35B, CNC, 16.7"max.dia, 23.6"sw.over bed, 9-2500 RPM, #13465

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #SL35MC, 24"x 35",12"chk,C-axis,live tooling,Fanuc 15TF,1989,#S26986

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL4A, 25.5"sw,30.1"cc,16.5"str,3000rpm,Fanuc 10T,chip,tlstk,(8103)

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Mori-Seiki #SL5, CNC lathe, Yasnac control

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Mori-Seiki #SL5B, CNC, 12.2"dia., 24.4"sw.over bed, 25-2500 RPM, #13464

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #SL5H, Yasnac LX1,2-axis,10"3-jaw hyd chk,12"X,42"Z,12 tls,15 HP,1985

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Mori-Seiki #SL65A, 16T,18"chk,35"sw,35"BC,1800 RPM,12 trrt,50 HP,tool eye,chip,'99

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SL6A, CNC, 27.56"swing over bed, 10-1800 RPM, 30 KW, #13462

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #SL6B, CNC, 27.56"swing over bed, 10-1010 RPM, 30 KW motor, #13463

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #SL75B, 36"swing, 15"chuck, 68"centers, 6"hole, Fanuc 11T

Noll Machinery Inc, Cleveland, OH 216-332-1870 (Fax 216-332-1873) Fred Mervis

Mori-Seiki #SL7B CNC Lathe, 35.8" o/bed, 68.8" centers, 50 HP,21.5"chk,Fanuc 6%TB,'81

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

Mori-Seiki #SL80A CNC Chucker

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL-8F, Fanuc TB,8.5"spdl.bore,24"3-jaw hyd.chk,chip conv.,6 sta.turret

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Mori-Seiki #Sl8F, CNC turn.center,51-1/2"swing,6TB,chip,39"hyd.3-jaw,8.5"hole

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Mori-Seiki #SL8F, combination lathe,51.1"swing,8.5"bore,143 RPM,40 HP,32"man.chuck,6-tur.pos,1985

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #TL40A, MF-T4, 25-2500 RPM, 8-Tools, 1991

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Mori-Seiki #TL40B, Fanuc 10T, 12-2000 RPM, 25 HP

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Mori-Seiki #TL40B, 24" x 120", 30 HP, 3.5"hole, 2000 RPM, MS 518

Richard Lunt Machinery, Seattle, WA 206-763-1390 (Fax 206-767-9825) Richard Lunt

Mori-Seiki #TL4B/3750, 10TF,14"chk,4"bore,24.4"sw,147"BC,2k RPM,8 trrt,pro stdy,'89

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #Tl5, 24.4"swing, 43.3"between centers, Fanuc OT control

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

Mori-Seiki #TL5B, 18"max.swing, 4"hole, 25 HP motor, 12-1400 RPM, #14501

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

Mori-Seiki #VL55, 20",Fanuc 18T,12 position turret,2000 RPM,40 HP,1998

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #ZL15, 20"swing,2"spdl.bore,Fanuc 11TT,6"hyd.chuck,chip conv,1987

G & S Machine Company, Dayton, TX 936-257-9984 (Fax 936-257-8891) G. Farrell

Mori-Seiki #ZL-15S, Mori MF-D6, 4-axis, 1.6"bar, 2.05"spdl bore, FMB 5-42 barfeed ,#25619

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Mori-Seiki #ZL203SMC, combination lathe, MSC501 control, 6"chuck, 2003, FOB: Minnesota

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mori-Seiki #ZL-25, 12"chuck

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Mori-Seiki #ZL250/600, MSC501, 2-turrets, 10"chuck, BB, 26"cc, 3500 RPM, 2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #ZL250B-600, 4-axis,3500 RPM,10"chk,tailstk,MSC-501,2000,#S15919

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mori-Seiki #ZL25B/1000, 40"cc, 10"chuck, twin turrets, Fanuc 15T, tailstock, 1991

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mori-Seiki #ZL25B/500, Fanuc 15TT,20.5"swing,chip conv,tailstk,3.1"bore,1990 (2)

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Mori-Seiki #ZL-25B/500, 4-axis,Fanuc 16T,20"sw,tailstk w/20"cc,twin turret,1996

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mori-Seiki #ZL25B/500, Fanuc 16T,twin turret,Big Bore,chip conv.,3500 RPM,1993

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #ZL25B/500, Fanuc 15TT, completely refurbished, 1990

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Mori-Seiki #ZL25B/500, 4-axis, Fanuc 15TT, 20.5"CNC ctrl, 10 sta.turret, 10"chuck, #15492

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #ZL-25B1000, 20.47"x40.55"cap.,4-axis,Z trrts,3.15"hole,3500 RPM,1988

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori-Seiki #ZL-25MC/1000, 4-axis,20"x 45"cap.,tlstk,live tlg,LNS B/F,'96,#06001

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Mori-Seiki #ZT1500Y, sub-spindle,live tooling,Fanuc,8-axes,Y-axis,LNS B/F

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mori-Seiki #ZT1500Y, CNC turning center, 2004

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #ZT2500Y, twin spindle CNC lathe, 2002

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Motch #125-VNC, 22"chuck, Fanuc 18T, rebuilt 1997, (2) in plant, #s27711

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Motch #225VNC Vertical, 2-spindle,24"sw,(2) 22"chucks,Fanuc 18T,'80,#s27713

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Motch #MVSl315, Fanuc 21iT,12"chk,8.66",12.20"x,12.99"z,(12) 9"x9.5"pallets,1998

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Nakamura #SC-300, 10"chuck,2.8"bar,12 turret,Fanuc 21,tailstock,chip,nice,1998

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Nakamura-Tome #STS40, 9-axis,Fanuc 16iTB,(2)12"chks,10 tls,12 trrt,40 T.C.,2000

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Nakamura Super NTJ, 9-axis,twin trrts,twin chks,live tls,BF,hi-press cltn,U/P,'07

American Machinery Co Inc, Newtown, CT 203-335-1153 (Fax 203-426-2747) Bill Buckens

Nakamura #TMC4, CNC combination lathe, 12"chuck

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Nakamura Tome SC250, 17.72"swing, 24"centers, 8"chuck, Fanuc 21iT, 2002, #17039

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Nakamura Tome SC-300, Fanuc 18T,10"chuck,2.79"bar,tailstock,chip,1998,#142445

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Nakamura Tome Slant 1B, Fanuc,sub-spdl,LNS BF,8"3-jaw,cllt chks/cllts,hldrs,'87

Cap Machinery Corp, Auburn, MA 508-832-8555 (Fax 508-832-4142) John Capuano

Nakamura Tome Slant Jr., sub-spindle, 6" hyd. chuck, parts catcher, Fanuc

Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman

Nakamura Tome Super #NTJ, 10-ax,2 spdl,2 trrt,B/C/Y-axes,Fanuc 18iT,'05 #17252

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Nakamura Tome Super NTJ, 9-axis,Fanuc 18iT,hi-pressure coolant,bar feed,2007,#18622

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Nakamura Tome #TMC18M, Fanuc 21i,4500 RPM,15.7"sw. x 20"cc,8"chk,4 mill.hds,'98

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Nakamura Tome #TMC-300C, 10"chuck, 3.3"bore, 12 turret, Fanuc 16T, 1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Nakamura Tome #TMC35, Fanuc 11T, 12"chuck, 3"bar cap, 20 HP, 40"ctrs, cc, 1994

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Nakamura Tome #TMC35B, CNC lathe, 1994

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Nakamura Tome #TW20MM, Fanuc 18iTB,2.5"bar,4500 RPM,20 HP,2 tools,12 trrt,2003

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Nakamura Tome #WT250, Fanuc 18iT, 2.5"cap, twin turrets, sub-spindle, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Nardini Logic #250G, 20"x 80"flat bed,Fanuc 20T,3.1"bore,prog.turret,1997

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Nardini CNC Lathe, Logic 500G, 39"x 166", 7.5"hole, Fanuc 20TA, 1997

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

Niles Simmons #N41, 129"x 37"milling & drilling 48 ATC,Siemens 840 ctrls,1997

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Okuma Cadet BB, OSP-5020L,10"chuck,3.15"bore,12 pos.trrt,15 HP,chip conv,nice,1995

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma Cadet #BB LC-8, univ.CNC lathe,sw/cut 19"/14",2"bar x40",8"chuck,20 HP,5k,OSP-5020 CNC,1995

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Okuma Cadet #LC-8, OSP5020L control, 10" chuck, big bore, 3000 RPM, 12 sta. turret, tailstock,LNS bar feed

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Okuma Cadet #LNC8, OSP5020L ctrl, tailstock, chip, collet chuck, tooling, 1994

King Precision Technologies, Monroe, NC 704-296-9100 (Fax 704-296-5635) David King

Okuma Cadet #LNC8, CNC lathe, 15/85"swing, 9.8"turn.dia, 19.69"turn.length, 1999

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Okuma Cadet #LNC8, OSP700, 8" chuck, 2", tailstock, 1996

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Okuma Cadet #LNC8, Combination Lathe, OSP 100L, 8"chk, 2", tailstock, 1996

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Okuma Cadet #LNC8, OSP5020L Control, 12 position turret

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Okuma Cadet #LNC-8, OSP700L,8"chuck,2"bar capacity,12 pos.turret,4200 RPM,1996

Madison Tool Inc, Waunakee, WI 608-850-6730 (Fax 608-850-6734) Pat Klitzman

Okuma Capital #L370, CNC lathe,OSP E100L ctrl,20.87",30 HP,chip conv,2004 (2) avail

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma Captain #L370, OSP-L100 ctrl,tailstock,20"swing,20/15 HP,2004 (2) avail.

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Okuma Captain #L370 Big Bore,OSP E100L,20.08"sw,10"chk,tlstk,20.47"cc,3.5"spdl,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Captain #L370BB, E100L, 3" Combination Lathe, 2001

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Okuma Captain #L370M, tlstk,live tools,bar feed interface,IGF,OSPE100,2"bar,2001

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Okuma Captain #L370MW-BB, live tools,sub,b/f interface,chip conv, 2.75"bar,2006

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Okuma Captain #L470 Big Bore,OSP P100,24.4"sw,15"chk,tlstk,25.6"ctr,4.33"spdl.br,'06

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Crown, OSP 700 CNC,SMW brfdr,parts catcher,8"chk,tlstk w/20"cc,low hrs,1998

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Crown #726 BB, univ.CNC lathe,sw/cut 26"/15",2.8"bar x19",10"chuck,20 HP,5k,OSP-5020 CNC,1995

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Okuma Crown #7625BB, OSP 700C,10" chk,3.1" bore,21.6"sw.x 20"Z,3500 RPM, 1998 (2)

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma Crown #762S, OSP700L,8"chuck,2.44"bore,SMW SS2000 bar fd,tlstk,1996 [#626]

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Okuma Crown #BB, OSP700L, 10" 3-jaw, mono IGF, chip conveyor, 1998

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Okuma Crown CNC Lathe, OSP700L control, 1997, #I-2679

Pacific States Machinery Co, Clackamas, OR 503-722-5117 (503-296-2178) John Poukkula

Okuma #ESl8, U10L w/IGF, 8" chk., tailstock, chip conveyor, 2000

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Okuma #ESL8, CNC Lathe, Okuma OSP-U10L,8 pos.turr,8"3-jaw chk,2-Axis,17.7"sw.over saddle,10.6"dia.turn,10 HP,Ser.C0209,1999

Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Fax 888-804-4007) Craig Hilpipre

Okuma Impact #LU15, 4-axis CNC Lathe, OSP 7000 control

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Okuma #KC29-2SC, CNC 4-axis Simulturn turning center, 1988

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #L1420/1250, 700L,15"chk,3"bore,24"sw,49"bc,3500rpm,12 trrt,steady,chip,1997

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Okuma #L1420BB/1250, CNC lathe, chip conveyor, 15"chuck, tailstock, 1996

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Okuma #L370, OSP-E1006, 10"chk, prog.tails,20"sw.x 20"Z, 3.1" bore, 2004

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #L370SB, Combination Lathe, OSP 200L, MTA Bar Feed, Chip, 2008

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LAW 2S, 4-axis, 75 HP, 3000 RPM, OSP U100 controls, (2) available

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LAW-R2ST, 18"chuck, 4-axis, OSP 5020L, conveyor, tools, 1993

High Technology Machines Inc, Tucson, AZ 520-818-9145 (Fax 520-818-9146) Russ Maynard

Okuma #LB12, 8"chuck,2-axis,10 HP,3500 RPM,OSP 500L,8 pos.trrt,'88,#JV-17221TK

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Okuma #LB12, OSP-500L, 8" chuck, 1.7" bar cap, 10 HP, 8-pos turret,chip.conv.

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma #LB15, 15.75"swing,20.47"cc,12 sta,4200 RPM,15 HP,OSP 5020L,tailstock,1991

Star Equipment Co., Inc., Union Lake, MI 248-366-6400 (Fax 248-366-6500) Chris Starnes

Okuma #LB-15, OSP5000L control,8"3-jaw,tailstock,conveyor,1-7/8"bore,1985

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

Okuma #LB15, chucking lathe, OSP5020L CNC Ctrl, 15.75"swing, 12 sta.turret

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Okuma #LB15, 15.75"swing o/bed,20.47"turn.length,12-sta,75-4200 RPM,OSP 5020L,(218289)

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Okuma #LB15IIMBB, 7000L w/IGF, live tool, C-axis, 10" chk, P.C., tail., chip, 1997

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Okuma #LB15II-MW, 4-axis,Big Bore,sub-spdl,OSP7000L w/graphics,collet chks,1998

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Okuma #LB25, 18"x 25", OSP 5020lG, 15"-2jaw chk, 3.54"bore, 65-3500 RPM, 1990 (2)

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Okuma #LB-25 Big Bore, 24"sw,50"bc,15"chk,4.33"bore,OSP-5020LIGFIGF,1992,#18247

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #LB250T, 2-x slant bed CNC lathe, OSG robot, 3.15"bore dia, (25872)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Okuma #LB250T, CNC 2-x slant bed lathe, 3.15"bore dia, OSG robot, 20.87"OB (25874)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Okuma #LB25BB/1250, 5020L,IGF,15"chk,3.5"bar,50"cc,30 HP,chip conv,clean,1992

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma #LB300M, OSP U-100, chip, tailstock, 1999

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LC-20, 4-axis Simulturn,OSP5000L-G,hyd.LNS cllt chk,tlstk,chip,1985

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Okuma #LC20-1SC, OSP5000L-G, 15-3/4"swing, 10"3-jaw, tailstock, chip, 1986

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #LC20-2SC, 15.75"sw,18"turn.lgth,4-axis 8 & 12 pos.tur,3500rpm,'88,Stk#9573

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Okuma #LC20-2SC, Combination Lathe, OSP 5000L,15.75"swing over bed,2.2"hole,3500 RPM,1990

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma #LC20-2SC, Combination Lathe, 15.75"swing, OSP5000L, 3500 RPM, rebuilt in 1999 by Okuma

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma #LC20-2SC, OSP 5000L,4-axis Simulturn,chip convyr,tlg,'90,Okuma reblt.'98 (2)

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Okuma #LC30-1SC, OSP 3000, 12"air chuck, 2-axis, chip conveyor

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Okuma #LC30-2S, 4-axis, 12" chk, 12/8 sta.turrets, 3" hole, 40 HP,OSP5020l,1989

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Okuma #LC30-2SC, OSP 5000 & IGF,12"hydraulic chuck,4-axis, chip conveyor

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Okuma #LC40, 15" chuck, OSP3000, mint, our stock #10566

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Okuma #LC40 2ST, 60 HP,2500 RPM,Okuma OSP P200 ctrls,rebuilt & retrofit

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LC40 CNC, OSP 3000, 4-axis, twin turret, 23.6"swing, 21.6"length, 1982

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Okuma #LC40-2ST, CNC turning center,OSP5000L-G control,10-2500 RPM,60 HP,chip conveyor,1985,#MV1312

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Okuma #LC-50-2ST/750, OSP 7000, 32" chuck, chip conveyor, 1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LCC-15-2S, OSP-700L,ganty ldr,4200rpm,8"chk,(2)12 sta.trrts,'99,#26347

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LCC15-2S, Combination Lathe, twin turrets, chip conv, clean, 1998

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Okuma #LFS15, Lathe, 28.3"swing, OSP-700L CNC, 8"chuck, robot load, #S27099

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Okuma #LFS-15-2SP, OSP-U100L,dual spdl,stocker/ldr,8"chk,12 tool trrt,1999

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LH35N, OSP5000L,24"swing,80"cc,30hp,3k rpm,4 & 8 sta.turrets,chip conv,'85

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Okuma #LNC-8, OSP 5020L,15.75"swing,9.8"max.turn,tailstock,chip conv,8"chuck

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma #LNC8 CNC Turning ctr, OSP 5020L,2.2"bore,15.75"swing,9.84"turn dia. (25266)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Okuma #LNC-8C Big Bore, 10"chuck,12 turret,chip conv.,tailstock,nice,1994

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Okuma #LNC8C Cadet, OSP 700L, collet chuck tailstock, 15.75" sw,20.5" Z-axis,'98 (2)

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Okuma #LOC 650, 4-axis lathe, 75 HP, OSP E100L controls, 15"spindle bore

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LR102ST, 4-axis, 10 HP, 6000 RPM, OSP 5020 controls

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LR-15, OSP5000L, 4-axis, chucker, chip, BFI, 1989

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LR-15, OSP 5020LG,4-axis,tailstock,chip conv.,tooling,rblt by Okuma 1998

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Okuma #LR15-2SC/600, 4-axis, OSP 5000LG, 4200 RPM 10ut/8lt, 2.44"hole

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma #LR25, 4-axis, OSP5020L, 12"3-jaw, tailstock, color control, excel, 1989

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Okuma #LR25, 4-axis, 20" swing, OSP 5020L-G, 3500 RPM, 3.54" HIShis

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Okuma #LR45 2ST, 4-axis, 60 HP, 2800 RPM, OSP 5020 controls (2)

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LT15M, 6-axis twin spindle cnc turning center, 1997

Trader Machinery Inc, Concord, ON 905-669-7507 (Fax 905-669-7512) Jon Goldman

Okuma #LT-15M, 8-axis,2-spindles,2-turrets,live milling,chip conveyor,OSP7000L,1998,#18406

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #LT15M, OSP-U100L,10"chks,twin spdl/trrt,C-axis,20"sw.x 40"cc,3.1"bore,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #LT-200MY SBB,10 main,8"sub,live tls,15"sw,3"bore,OSP-U100L,4500rpm,chip,'07

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

Okuma #LT-25, twin spindle,twin turret turning center,3500 RPM,OSP 7000L CNC,'99

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Okuma #LT25, CNC lathe, OSP 700L, 2.75"bar, 30 HP, 3500 RPM, #8280

Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

Okuma #LT-25M, OSP100, 7-axis, chip, 2001

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LT300BBMY, E100l,(2)10"chucks,3"bore,(2)12 trrt,(2)4k RPM,(2)30 HP,2003

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Okuma #LT300MY, OSP-100l,7-axis,sub.spdl,live tl.w/x, y axes,10"-8" chk,36"Z-axis

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LU15, OSP-700L, 8"chuck, dual turrets, chip conveyor, 1996, #25628

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LU-15BB, OSP 7000L CNC,10"chuck,Big Bore,tailstock w/23"cc,barfeed,1997

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma #LU15-BB, OSP-U100L,side chp,Kit B210 chk,LNS Quickload servo S2 barfd,'99

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Okuma #LU-15BB-2ST/350, OSP 7000, 4-axis, 10"chuck, chip conveyor, 1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LU15-BBMW, OSP-U100L,side chip,Kit B-210 chuck,LNS Quickload BF,'99

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Okuma #LU-15MW, OSP-1000, C-axis, sub-spindle, 2.75"bore, 1999, #26717

Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LU25 2SC, 4-axis, 40 HP, 3500 RPM, OSP 7000 controls, rebuilt

CNC MACHINERY & EQUIPMENT:LATHES, COMBINATION, CNC

CNC MACHINERY & EQUIPMENT:
LATHES, COMBINATION, CNC