Browse: Machinery Electrical

Machinery & Equipment >

Boring Mills >

Boring Mills, Vertical, Cnc (Including Vertical Lathes- Vtl & Vertical Turning Centers)

CNC MACHINERY & EQUIPMENT:
BORING MILLS, VERTICAL, CNC (Including Vertical Lathes- VTL & Vertical Turning Centers)

BORING MILLS, VERTICAL, CNC CNC MACHINERY & EQUIPMENT - Surplus Record

Daniluk Corp. a precision machine tool rebuilder since '82

There are 177 listings in this category
File update: Thu, Jun 20, 2013 01:23

Advanced Search

Sort by:

Original Sort

118/130" Titan, 130"sw,78.7"U/R,150 RPM,12 ATC,Siemens 840c,mint cond,2000,#1607

Machinery Inc, Sherbrooke, QC 819-346-2369 (Fax 819-346-5217) Stephane Gourde

8" Kingsbury #VTC-4, CNC vertical turning center, 20"swing, 37.4"X,9.84"Z, 8"chuck, Fanuc 16T, 8 ATC, #MV6046

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

12" Kitako #VT4-350, VTL,Fanuc 18iT,(4)12"chks,(2)12 sta.trrts,13.8"turn.dia.,'99

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

15" Doosan #V450, VTL, 22.83"sw, 17.72"turn.dia., 9.45"X, 17.72"Y, 12 sta.turret, Fanuc 18T, 30 HP, 2500 RPM, 2005

Tramar Industries Inc, Novi, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

15" Motch #115VNC, CNC vert.lathe,Fanuc 21iT,15"chk,8.255"X,17"Z,4500 RPM,'99

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

15-3/4" Hardinge Conquest #VT200, VTL,25.5"sw,7.94"X,19.88"Z,19.6"cc,Fanuc 18T,1996

Tramar Industries Inc, Novi, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

15-3/4" Hardinge #VT100, Fanuc 18T,12 ATC,15.7"turn,7.9"X,20"Z,25"sw.,'95 (2)

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

15-3/4" Hardinge #VT100 & VT200, 27"sw,15-3/4"turn,12 sta.trt,tlstk,20hp,'97-00

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

15-3/4" Hardinge #VT200, Fanuc 18T, auto door, load, mist collector, (3)

Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson

15-3/4" Motch #115VNC, VTL,8.25"X,17"Z,Fanuc 21iT,rapid trav.,4500rpm,65 sta.tur,'99

Tramar Industries Inc, Novi, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

20" Okuma-Howa #V55R, vert.lathe,Fanuc 18i,21.7"turn.dia.,25"turn lgth,12 ATC,'01

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

21" G & L SmarTTurn V21, turret,39"sw,2000 RPM,3-Jaw chk,56 HP,G & L 8000,'93 #22827

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

24" Diedesheim #V60-11, 24"chk,75"X,20"Z,Dynapath 9000/Bendix ctrl,6 pos.trrt,'89

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

24" Doosan #V550, OiTC,24"chk,31.5"sw,29.5"Ht,2000rpm,8trt,ZF gear box,chip conv,'10

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

24" Doosan #V740, 31.5"sw,30"lgth,V12 turret,50 HP,chip conv,Fanuc 21TB,'04,#22506

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

24" G & L #581, VTL,CNC,40"swing & turn,36"Z,8 ATC,6 pos.trrt,#50 tpr,1 yr warranty

Ackerman Machinery Sales, Livingston, TX 414-899-5800 () Paul Ackerman

24" G & L SmarTTurn #V28, 48"swing,6-pos.turret,chip conv.,G&L 8000,'95,#22828

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

24" Motch #125TSVNC, Fanuc 21iT, 12 Tools, 24"Chuck, Mint, 2001

R A B Industries Inc, Washington, MI 586-752-0090 (Fax 586-752-0030) Rod A Blasius

24" Motch #125VNC, Fanuc CNC,3-Jaw,31"sw,30"UR,6 pos.trrt,50 HP,original owner,exc.

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate

28" G & L #581, VTL,CNC,40"swing & turn,36"Z,8 ATC,6 pos.trrt,#50 tpr,1 tr warranty

Ackerman Machinery Sales, Livingston, TX 414-899-5800 () Paul Ackerman

30" Motch #135, Fanuc CNC,3-jaw,chip conv,new hyd,complete remfr.w/1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

30" Motch #135, Fanuc CNC,3-jaw,chip conv.,new hyd.,complete remfg. w/1 yr warranty

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

30" Motch #235D, Fanuc CNC,3-jaw,chip conv.,new hyd,completely remfd,1 yr warranty

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

31.5" Dorries #VCE 80/120, 47"swing, Fanuc 21iTA (new 2000), 8 sta.ATC, #23020

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

31.5" Sterlitamak #800VT, 370 RPM mill/turn center, 39"max work height, 48 HP, new

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

35" Motch #135, GE 1050 control,30"chuck,42-1044 RPM spindle,1982,#2658JV

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

36" Bullard Dynatrol, 48"sw,300 RPM,12"X hgt,3-jaw,Bendix 5M retro-1982, CHEAP, Call

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

36" Bullard Dyn-au-Tape, Fanuc OT, 34"vertical, 3-jaw chuck, turret head

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

36" Bullard, turret & side hd,48"swing,3-jaw chk,300 RPM,Fanuc 16TT,rblt '94,#20682

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

36" Ex-Cell-O #454, VTL,46"sw,20"X,24"Z,550 RPM,36"chk,clnt,DD 40T ctrl,retrofit'93

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

36" G & L #581, VTL,CNC,40"swing & turn,36"Z,8 ATC,6 pos.trrt,#50 tpr,1 yr warranty

Ackerman Machinery Sales, Livingston, TX 414-899-5800 () Paul Ackerman

36" Giddings & Lewis, 4-jaw,48"sw,36"U/R,turret,480 RPM,G&L 800,75 HP (11841)

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

36" New Century, ram w/12 ATC,450 RPM,3-Jaw chk,clnt thru tool,Fanuc 18iT,'03,#22819

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

39" Monarch #VTN10, new CNC,56"swing,43"UR,31-1/2"ram travel,12 ATC,75 HP,1982

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

40" Doosan #VTS1214M, Fanuc 32iTA,32"turn,31.5 ram str.,630rpm,live tlg,15 atc,'12

520 Machinery Sales LLC, Elk Grove Village, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg

40" Tongil #TNL-120V, CNC VTL,62"sw.,Fanuc 18-TC,40"hyd.chk,Servo,2005,#4049

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

40" W & S Gray VTS, 40"chuck,9 sided turret,Fanuc,refurbished,reground ways

KGI Machine Tool, Houston, TX 713-849-9555 (Fax 713-849-9552) Kent Gasaway

40" You Ji, 40"3-jaw pwr.chk,40"turn,47"swing,C-axis,31-1/2"Z,12 ATC,Fanuc,2008

Ackerman Machinery Sales, Livingston, TX 414-899-5800 () Paul Ackerman

42" G & L, new CNC,52"sw,35"UR,38"ram tvl,5-400 RPM,45 ATC,twin pllt.chgr,1989

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

42" Gray vert.lathe, 42"3-jaw power chuck, 36"under rail, 50"swing, GE CNC control

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

42" Gray vert.lathe, 42"3-jaw power chuck, 24"under rail, 50"swing, GE CNC control

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

43"/53" Defum #KNA110/135, CNC, 40 HP, New Electrics & Fanuc Oi, Remfg. As New

Hanza International, Moorestown, NJ 856-608-9090 (Fax 856-608-0991) Mark Rubin

46" Bullard #46 VNC, GE CNC, 46"chuck, 58"swing, 12 ATC, 1985

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

46" Bullard Dynatrol #46, 46"pwr.chk,58"sw,45"u/rail,side head,5 pos.turret

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

46" Bullard Dyn-Au-Tape, Fanuc OTA, 58"sw,32"U/R,T.H.,50 HP,190 RPM,#28778

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Sales Dept.

46" Bullard Dyn-Au-Tape, Yasnac Ctrl,46"4-Jaw chk,tur.hd,58"sw,46"U/R,50hp,'80,#4408

Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey

46" Bullard Dyn-Au-Tape, trrt,58"sw,35"U/R,150RPM,50HP,Fanuc 0T,retrofit'97,#20433

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

46" Bullard Dyn-Au-Tape, vert.lathe,48"u/rail,58"swing,new CNC ctrl,5 sided trrt

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

46" Bullard Dyn-Au-Tape #46, 46"pwr.chk,58"sw,45"u/rail,5 pos.tur.,updated control

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

46" Warner & Swasey Gray CNC #VTS, Fanuc OITB controls, 1981, retro.2006

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

48" G & L #512, 5-pos.turret,60"swing,4-Jaw,330 RPM,50 HP,G&L 800,'78,#22580

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

48" G & L #512, CNC VTL,60"swing SH below table,75 HP table drive,48"u/rail,1983

TrueForge Global Machinery Co, Rockville Centre, NY 516-825-7040 (Fax 516-825-7115) Ron Jaggie

48" G & L #512, ram & side hd,12 ATC,pllt shuttle,4-Jaw,400 RPM,G&L 8000,'85,#22690

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

48" G & L #70, 48"UR,60"swing,turret & side head,4-Jaw chuck,Machine Mate Z-Axis CNC

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

48" Giddings & Lewis Numeripath, vertical turret lathe, #3159

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

48" G & L vert.lathe,48"4-jaw tbl,Mitsubishi 320L CNC,60"swing,60"U/R,5 sided trrt

Tas Iron Ltd, Berea, OH 440-973-4394 (Fax 440-973-4395) Timothy Jones

48" G & L, 4-axis, 5 pos.turret & side head, 64"UR, 75 HP, 320 RPM, new CNC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

48" G & L, ram w/12 ATC,3-jaw pwr chk,60"sw,60 HP,Fanuc 0i retrofit 2012,#22334

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

48" G & L, 60"max.sw,60"hgt.U/R,12 pos.tool changer,60 HP,G&L 800B CNC Ctrl,(2)

Machinery Acquisitions Int'l, Houston, TX 713-467-9081 (Fax 713-672-7905) Ron Braman

48" Giddings & Lewis, 60"swing, ram w/ATC, 60"UR, 50 HP, new CNC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

48" Giddings & Lewis, 60"swing,72"U/R,333 RPM,live spdl,ram,ATC,60 HP,1990,#14395

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

48" Gray Ringmaster, 5 pos.trrt,3-jaw chk,48"max.vert.rail trvl,24"max.vert.ram trvl

Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Fax 715-886-3016) Fred Parker

48" Gray Ringmaster, 4 pos.turret,57"swing,48"U/R,287 RPM,75 HP,GE 2000,'87,#22957

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

48" Gray Ringmaster, 4 pos.turret,60"swing,48"U/R,300 RPM,Fanuc 21i-T,'75/'12,#22955

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

48" Gray, 3-jaw,56"swing,48"U/R,9.5-290 RPM,turret head,Fanuc 15T,50 HP,#11635

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

48" Summit, Fanuc OT, 55" under rail, 55" swing, Ram, 1985

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

48" Gidding & Lewis, Hi-Col.,12 ATC,60" U/R,60"Sw,4-Jaw,60HP,G & L 800M,'83 #22383

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

49" Amera-Seiki #VT1200R, 49"chk,63"/59"sw/cut,9x9.5ram,12atc,BT50,0iTD,3 wks del

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

49" Femco #VT5-12N, ram w/ATC,63"sw,49"turn hght,280 RPM,Fanuc 0i,'02,#22414

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

49" Ikegai #VT1100, Vertical Boring Mill, Fanuc 6TB, 43-1/4"X, 27-1/2"Z, 30 HP, chip conv., 1982, #B620022

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

49" O-M #VT5-12N, Fanuc 6TB,63"sw,4 sta.turret,300 RPM,U/P in Aerospace plant,1982

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

49" O-M #VT5-12N, 5 pos.turret,63"swing,49.5"turn.hght,300 RPM,50 HP,Fanuc 6T,#22359

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

49" Schiess Froriep #16DS125, A-B 7360,63"sw,63"ht,315rpm,12 ATC,75hp,'81,#3150

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

49" You Ji #YV1200ATC C, 63"swing, 50"Z, C-axis, Fanuc 18iT-B, 12 ATC

Ackerman Machinery Sales, Livingston, TX 414-899-5800 () Paul Ackerman

50" Doosan #VTS-1214, Fanuc 32iTA,53"sw,53"turn,2k rpm,60/75hp,lv.tools,chip,'12

Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Fax 262-854-5055) Steve Daigle

50" Hankook #VTC125E-APC, dual pallet CNC VTL,Fanuc 31iTA,62"swing,less than 200 hrs

Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Fax 847-968-2001) Frank Turi

50"/71" Komatsu #BTM12Y, Fanuc 6MB or new,49.2"tbl,live spdl,plt.chgr,exc,'82

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

51" Monarch #VJN09, MDSI CNC,43"U/R,51"swing,36"chuck,31-1/2"tvl,5-pos.turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

52" Bullard Dyn-Au-Tape #46, VTL,Fanuc 21iT,16 ATC,60 HP,chip,complete rebuild 2011

Tramar Industries Inc, Novi, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

52" Bullard Dyn-Au-Turn, 46"pwr chk,52"sw.,5 sided trrt,A-B Series 9 CNC,1983,#9228

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

52" G & L, G&L 800 4-Axis CNC,4-Jaw chk,5 pos.pwr trrt,33"trrt.trvl,side hd,280 RPM

Machinery Acquisitions Int'l, Houston, TX 713-467-9081 (Fax 713-672-7905) Ron Braman

54" G & L #512 Twin Pllt, 58"swg,65"under rail,live tooling,45 ATC,8002l CNC,1991

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

55"/63" Dorries #VC-1600, 2-rams w/milling,pallet shuttle,ang.head,ATC,'93,#22107

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

55"/63" Dorries #VCE1600/140F, twin rams,live spdls,C-Axis pllt chngr,Siemans CNC,'93

Noll Machinery Inc, Cleveland, OH 216-332-1870 (Fax 216-342-4096) Fred Mervis

55" Hankook #VTB140, Fanuc 31iTA,62"swing,12 ATC,coolant sys,200 hrs,like new,2011

Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Fax 847-968-2001) Frank Turi

55" Olympia #V-60, 70" tvl.,62" u/rail, x-47.6",z-31.5",Fanuc 18i-TA,10 atc,linear scales,rblt.'11

DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

56" Bullard Dynatrol, Fanuc 11TT, turret & side heads, 3-jaw chuck, 50 HP

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

56" Bullard Dynatrol, CNC Boring Mill, Fanuc 18i, 68"swing, 71"under rail, 100 HP, 4-Jaw chuck, 2009

VTL Solutions Inc, Houston, TX 832-545-4141 () Sean Moynihan

56" Bullard Dynautape, ram w/16 ATC,68"swing,85"u/rail,320 RPM,Fanuc 21i,'05,#22861

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

56" Bullard Dyn-Au-Tape, A-B7360 CNC or new CNC,5 pos.trt,50"UR,270rpm,good,'80

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

56" Bullard Dyn-Au-Tape CNC,4-jaw,68"sw,2-320RPM,100HP,GE 1050,tl.blk.chng,#12103

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

57.08" Toshiba #TUE150, 78.74"sw.,61.02"cut ht.,FOi-TD,7/24 atc,#50 tpr,3k RPM,'11

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

58" Webster & Bennett CNC VTL, Fanuc 10T,4-jaw chk w/jaws,chip conv.,5 pos.pwr trrt

Morris Rezman Machinery Co, Elk Grove Village, IL 312-829-2510 (Fax 312-829-1281) Jeff Rezman

58" Webster & Bennett, 4-jaw, Fanuc 10T, turret head, 143 RPM, 30 KW

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

58" Webster & Bennett, VTL,Fanuc 10T,64"turn.dia,61"u/rail,40"cr.tvl.trrt,50 HP,#2246

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

59" Berthiez #TFM-125, 12 ATC,61"sw,51"U/R,315 RPM,75 HP,GE 2000 CNC,'85,#21291

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

60" G & L, 4-jaw,72"sw,60"UR,new 4-axis CNC,272rpm turret,rail head,side head

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

60" Gray Ringmaster, CNC,68"swing,60"U/R,75 HP,4-jaw chk,excellent,#287058

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

60" Gray, 4-axis,new cnc,84"U/R,60"tbl,pwr.4-jaw chk,vrt.ram & side hd,75hp,good,'78

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

60"/67" Monarch #VLN14, 4-Axis,Fanuc15 TT,dual pallet changer,(2) 57"4-jaw,#26293

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

62" Berthiez #TVM125, 75"swing,125 HP,live milling,Fanuc 15,20 ATC,400 RPM,1997

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

62" Berthiez #TVM-125, F15T,75"sw.,43.3"u/rail,31.5"vert.tvl,20 ATC,62"face plate

DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

62" Berthiez #TVM125, Fanuc 15TB, 20 ATC, 75 Swing, 125 HP, 1997, #3925

Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters

62" Bullard, Dyna-Au-Tape, 60"UR, 5 pos.turret, 270 RPM, new CNC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

63" Amera-Seiki #VT1600F, 63"chk,78/74"sw/cut,needs repair,0iTD,'10,$124,500.00

Amera-Seiki Corp., Hiawatha, IA 319-730-0326 (Fax 319-377-3035) Brad Pekerik

63" D-F #CK5116M CNC, Single Column Vertical Turret Lathe, C-Axis, ATC

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

63" Hankook #VTC-160E, 24 ATC,C-Axis,78"sw,55"turn ht,hyd.chk,Fanuc 31i '09,#22323

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

63" Toshiba #TMD-16N, live mill,80 ATC,pllt shuttle,79"sw,60HP,Fanuc 15T,'96,#16941

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

63" You-Ji #JV-1600ATC+C, Fanuc 18T, live milling, 79"swing, 16 ATC, 2003

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

64" Lansing, Pentagon turret,Siemens CNC,5-160 RPM tbl.spd,60HP,48"hor.tvl, #41002

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) Simon Srybnik

66" Bullard Dyn-Au-Tape, precision trrt,Fanuc OT,3-Jaw hyd,4-Jaw avail,50 HP DC

O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell

66" Bullard Dyn-Au-Tape, ram & side head,3-jaw chk,60"U/R,75 HP,A-B 9 CNC,'90,#22149

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

66" G & L CNC vertical turning center, 66"table,72"swing,75 HP,G&L 8002-L CNC ctrl

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

66" Olympia #V60L, 24 ATC,C-Axis Mill,80"turn dia,450rpm,80HP,Fanuc 180i,'03 #22325

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

71" Toshiba #TMC-16, milling,ATC,78"swing,250 RPM,Fanuc 18T,retrofit 2009,#18793

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

72" Bullard, Tool Block Changer,GE Fanuc CNC,78"sw,4-jw,12"ram,75hp,remfr,100"U/R

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

72" G & L #514 Series, CNC vert.turn.center w/C-axis & live drill/grind,84"swing

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

72" Giddings & Lewis CNC vertical turning center, 84"swing,100 HP,1990,#10797-I

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

72" Giddings & Lewis, 84"swing,99"X,36"Z,72"under rail,5 pos.turret,Fanuc 15t,S29747

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

72" Giddings & Lewis, CNC control w/milling spindle in ram, #3390

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

72" Webster & Bennett VBM, 72"table diameter, 84"swing, 4-jaw

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

73.82" Mazak Integrex #E1060V/8, 5-Axis,2-Tier 16 pallet sys,120 ATC,2007,#21305

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

76" Bullard Cutmaster, (1) RH, 84"swing, 92"UR, 125 RPM, Fanuc OT, 1991

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

76" Bullard Dynatape, RH,16ATC,2'Ex Hi Column,92-1/2"UR,4-Jaw,Fanuc 0T,1.7/200RPM

O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell

78" Kobe Diesel 20/40, 12-ATC,157"dia,63"U/T,120 RPM,Fanuc 16TB,rebuilt'08,#18790

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

78"/157" Kobe #LS20/40, 12 ATC,157"sw,63"u/tool,120 RPM,Fanuc 16i,rblt'12,#21609

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

78" SMTCL #GTC250110, 98"swing,Fanuc 18i,12 sta.ATC,probes,80 HP,2010,#22108

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

78"/157" Toshiba #TSS 20/40B, 12 ATC,157"swing,102"ht,50 HP,Fanuc 15T,'93,#18867

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

78"/157" Toshiba #TSS20/40B, ram w/12atc,157"sw,63"U/R,100RPM,F15M,'93,#22568

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

78" Toshiba #TUD 20, 98"dia., 63"U/T, 200 RPM, 12 ATC, Fanuc 15Ta, 1995, #18794

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

79" O-M #TMM20-30N, 118"sw,86"UR,30 turn.tools,200 live tools,Fanuc 15m,'01,S31554

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

84" G & L, new CNC,84"rated/92"max.UR,84"plain tbl,(2)62"non-swivel ram heads

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

84" Gray Series 60, 96"sw.,RH rail & side hd.,2 or 4 axis,75 HP,rblt.,new cnc,'70

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

98.4" Titan #SC2500, 2 heads,RH,TH,Fanuc 11TT,104"sw,74"vert.,25 HP,1980's

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

98.4" Titan #SC2500, 104"sw, 74.8"under rail, 50"ram trvl, 42"tur.trvl, Fanuc 11TT, 75 HP, 5 pos.index head, 1980

Tramar Industries Inc, Novi, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

100" Morando, 108"sw.,80"UR,turret slide,4 pos.auto index,new CNC,exc.,unused,'87

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

108" Century Turn, 12-station ATC,120"swing,72"U/R,140 RPM,Fanuc 18iTB,2007,#21841

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

118"/157" HNK #VTC 30/40, milling,16 ATC,157"swing,100 HP,Fanuc 18T,2001,#18601

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

118" Toshiba #TD30/36S, 2-rams,141"sw,126"ht,74 HP,Siemens 840C,retro 1992,#17908

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

118"/216" Toshiba #TSS30/55, 102"U/R,threading,Fanuc 16,rebuilt & retro 2011,#20751

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

120" Farrel CNC 100 ton capacity vertical boring mill, 132"swing, #10787

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

120"/132" Froriep #10KZ300, dbl column,A-B Panelview 550,(2) swivel ram heads,#25859

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

120" New Century CenturyTurn, ram w/12 ATC,130"sw,96"U/R,70 RPM,F18iT,'05,#22408

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

120" New Century, live milling w/C-Axis,120 RPM,144"swing,60 HP,Fanuc18iT,'09,#22816

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

120" Skoda #SKZ32, new CNC,138"swing,85"U/R,70"right/left hd ram trvl,120"tbl dia.

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

124" Bullard, high column CNC, 2-axis vertical turning & boring machine

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

125" Farrel #800/100 Ton, dbl.col,137"swing,96"HUR,ram hd,Siemens 840C,retro 1999

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

128" Froriep #Rigmill, Fanuc 15M, 70" under rail, 8 tool sta.,75" col. cr. tvl, 50" vert.,25 HP, 3150 RPM, 1990, #2832

Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Fax 309-698-5562) Ken Webster

130" Morando, 130"swing,82"U/R,80 HP,12 ATC,new CNC,47"ram,excellent,1988

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

144" Phoenix #VTC144/160, 2-rams w/ATC,160"sw,42"UR,100RPM,F18i 4-Ax,'09,#22279

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

144" Phoenix #VTC144/160, ram w/ATC,160"sw,42"UR,100 RPM,Fanuc 18i,'09,#22280

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

157" Morando #DNC 4.3, ram w/ATC,169"sw.,milling,C-Axis,96 RPM,AB 9260,'96,#22281

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

177" Qiqihaer DVT, 196"swing,124"U/R,40 RPM,38 ton,Siemens 840D CNC,2008,#17801

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

177" Quiqihar #DVT-500, 2-rams, 196"swing, 98"turn ht., 40 RPM, Fanuc 0T, #21056

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

236.22" Pietro Carnaghi #AS65T, CNC live spindle VBMs,tbl.dia. 236.22"/6000mm (2)

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

240" Niles, 2-rams,169"u/rail,96"ram stroke,75 HP,partial CNC retrofit '10,#21930

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

248" D-F (China) #CK5263, Siemens 802C, CNC double column with or w/out C-axis

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

300"/354" Niles, 2-rams,192"ht,100 KW motor,Fanuc 0i CNC,retrofit 2008,#18418

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

315" (8m) D-F #CK5280 (China), 118" (3m) U/R, Option "C" Axis, New

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

630" (16m) D-F #CK52160 (China), 236" (6m) U/R, Option "C" Axis, New

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

Doosan #V400L, 0iT,12"chk,24"swing,18.1"ht,3k RPM,8 turret,30 HP,chip conveyor,'11

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan #V400R, 0iT,12"chk,24"swing,18.1"ht,3k RPM,8 turret,30 HP,chip conveyor,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Gray #VFR, CNC VTL, 42"chuck, 52"swing, Fanuc 21iT, (1) 50 HP, (1) 75 HP, (2)

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Fax 248-926-8499) Randy/ Jeff/Chris

Hankook #VTB16F, 21iT,63"4-jaw,78.7"sw,35.4"ht,280 RPM,12 trrt,60 HP,chip conv,'06

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hardinge Conquest #VT-100, Fanuc 18T,25-1/2"sw,7.94"X,19.6"cc,10" or 12"chks,1994

Tramar Industries Inc, Novi, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hardinge Conquest #VT-200, 25.5"swing,Fanuc 18TB,linear guides,chip conv,1996,#4065

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Hwacheon #Eco-5V.2SP, 2-spdl,31"sw,21"lgth,2-turrets,21"chks,Fanuc 0TC,'94,#22805

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hwacheon #VT1150, 0iT,40"3-jaw hyd.chk,53"sw,37.5"ht,630 RPM,12 trrt,75 HP,chip,'11

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hwacheon #VT1150, 0iT,40"3-jaw hyd,53"sw,37.5"ht,630 RPM,C-Axis,12 trrt,chip,'12

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Hyundai Kia #SKT5VRM, 21iT,18"chk,31.5"sw,23.6"ht,2k RPM,C-Axis .001°,12 trrt,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Kitako #VT4-350, 4 spdl,Fanuc 18T,(4)12"chks,13.8"turn.dia,(2)6 pos.trrts,3200 RPM

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mag #VTC-1000, 39.4"max.swing, 2k RPM, 18 ATC, 75 HP, 2009, #31439

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Sales Dept.

Mag #VTC1000, CNC VTL,live tools,18 position ATC,39"chuck,C-Axis,GE Fanuc 310i control,2009

Superior Machinery, Burt, MI 989-770-4827 (Fax 989-770-4873) Keith McKay

Mazak Integrex #E1850V, 5-Axis,120"X,71"work ht,80 ATC,2 APC,PC-Fusion 640T,'04,#22981

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak Integrex #E-800V5, CNC VTL,5-Axis,Maz.Matrix CNC,12k RPM,120 tool chgr,'07

R.P. Machine Enterprises Inc, Statesville, NC 866-726-0977 (Fax 704-872-5777) Bill Gilpatrick

SMS Accu-Cell #AC300-2, Fanuc 160iT,16"sw.,8"saddle tvl,14"slide tvl,12 trrt slides

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Supermax Max-1 Rebel mill, 1998

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Fax 414-769-1522) Joe Ryan

Back to category listings.

= photo available Spec Sheet

= spec sheet available rfq

= request quote from seller camera

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search