Browse:  Machinery Electrical
RSS Blog Surplus Record
CNC MACHINERY & EQUIPMENT:
BORING MILLS, HORIZONTAL, Table Type, CNC

BORING MILLS, HORIZONTAL, Table Type, CNC CNC MACHINERY & EQUIPMENT - Surplus Record

 Orca Machine Tools, Inc. is your used machine tool specialist
There are 135 listings in this category
File update: Tue, May 21, 2013 01:23
Advanced Search
Sort by:
Original Sort

3" G & L HBM, 72"bed trvl,40"col.trvl,82"saddle trvl,36"x 60"table Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

3" Toshiba #BFT9S, CNC HBM, with PC Based 4-Axis CNC,16-1530 RPM,#5 MT   Show item detail rfq

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

3-1/2" Hercules, 49-1/2"x 47"table, MJ Tech CNC control, 24 ATC, Cat 40   rfq

AH International, Las Vegas, NV 702-331-0187 (Fax 702-255-7702) Sales

3.9" Toshiba #BTD-9, 48"X,39"Y,20"Z,24"W,51"x51"rotary tbl,#50,Tosnuc 3,1989,S31335   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

3.9" Toshiba #BTD-9, Tosnuc-3 CNC,digital scale feedback,48"x39"x24",51"x51"r/tbl,'89   Show item detail rfq

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

4" Cincinnati Gilbert, horiz.boring mill,48"x96"tbl,96"X,72"Y,36"Z,#50 tpr,#6320   Show item detail rfq

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

4" Collet Englehardt #BFF6100NU, new CNC,70"X,47"Y,29"Z,35"x 70"table Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" G & L #PC40,6-1340rpm,48x72"tbl,72"cr,60"vt,#50,tlchgr,25hp,g&l800,'85,id#5894   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" G & L #PC40, new CNC,30"spdl.trvl,72"cr.trvl,30"saddle trvl,50"vert.trvl,4'x6'tbl Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" Giddings & Lewis #PMC-4, 4-Axis CNC boring mill, #8636   Show item detail rfq

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

4" Kearns-Richards #NC100,48"univ.6-axis rot/tilt tbl,40 ATC,25hp,#50tpr,1120rpm   Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" Lucas #42B60, HBM,Lucas CNC ctrl,74"x40"tbl,#6MT,pendant ctrl,20 HP,#50880   rfq

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

4" Machining Systems (equivalent), #50 tpr,30 HP,rotary tbl,Fanuc,78"cross,58"vt,new   Show item detail rfq

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 () Bill Garbe

4" Scharmann #FB100, Heidenhein TNC 426CB,37"x 51"rotary,refurb/retro'99,#8145   Show item detail  Show Video of Item rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

4" Tos #WHN11, 50"Y, 92"X, 40"Z, #50 taper, 55"x 55"rotary table, new CNC   Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4" Toshiba #BMC-10B, 4-Axis CNC,39"x69"main rotary table,72"X,49"Y,39"Z,30 HP,2003   Show item detail rfq

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

4" Union #BTF105, 4-Axis, 50"X,39"Y,49"Z, Heidenhain 355 CNC control   Show item detail rfq

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

4" Wotan #B105M, 4-Axis, Fanuc OM retrofit, built-in rotary table, 1989 rfq

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

4.3" Challenger #HBM-110, 60 ATC,86"X,63"Y,B-Axis rotary table,TSC,2011,#20981   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Ikegai #NB110T, Fanuc 16MB 5-Axis ctrl,XYZ scale feedback,40 tool ATC w/BT50,'98 Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

4.3" Microcut #HBM-4, 60 ATC,86"X,63"Y,49"x59"rotary tbl,3k RPM,Fanuc 31i,new,#21562   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" MicroCut #HBM-4, 60 ATC,86"X,63"Y,B-Axis r/tbl,3k RPM,TSC,F31iMB,'13,#22427   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" MicroCut #HBM-4, 60 ATC,86"X,63"Y,B-Axis r/tbl,3k RPM,Fanuc 31iMB,'13,#22426   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Toshiba #BTD-110R16, 40atc,78"X,59"Y,55"x63"r/tbl,3k RPM,Tosnuc 888,'06,#1726   rfq

Machinery Inc, Sherbrooke, QC 819-346-2369 (Fax 819-346-5217) Stephane Gourde

4.3" Toshiba #BTD11ER-16, 60atc,78"X,59"Y,55"x63"B-Axis r/tbl,Tosnuc 777,'90,#22615   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Toshiba #BTD-200QF, 39.4"X,39.4"Y,39.4"x39.4"tbl,30 ATC,Tosnuc 888,'98,#1725   Show item detail rfq

Machinery Inc, Sherbrooke, QC 819-346-2369 (Fax 819-346-5217) Stephane Gourde

4.3" Toshiba #BTH110R18, HS,888,55"x71"tbl,98",78",59",19",.001°,4k RPM,60 ATC,'06 rfq

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

4.3" Union #BFT-110, 78"X,50"Y,rotary tbl,facing head,40 HP,Heidenhain CNC,'88,#22105   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.3" Union #BFT110-6, Fanuc OM-A with scale feedback,55"x 49"B-Axis rotary,1994   Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

4.3" Union, 80"X, 50"Y, 49"x55"rotary table, #50, Heidenhain TNC 360, 2000, #1420   rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

4.33" Kuraki #KBM11X-P, 59"X,39.4"Y,27.6"Z,13.8"W,(2)pllt,30 ATC,Fanuc 16im,'01   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

4.33" Kuraki #KBT-11WA, 78.7"X,59"Y,57"Z,55.1"x63"Tbl,40 ATC,Fanuc 16i-M,'00,S31611   Show item detail rfq

Perfection Industrial Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Dept. Sales

4.33" Kuraki #KVT-11DX, Fanuc 15M, 47"x 55"table, 1986 rfq

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

4.33" Nomura #B110SR, 45x50"rotary tbl,63x50x39x26"trvl,30 ATC,Fanuc 11M,'87,#8572   Show item detail  Show Video of Item rfq

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer

4.33" Toshiba #BTD-11ER16, 78"X,59"Y,r/tbl,2500 RPM,chip conv,Tosnuc 777,'92,#22045   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.33" Toshiba #BTD-11ER16, 78"x59"x19.7",63"x55"tbl,40 ATC,Tosnuc 732,1994,(2) avail   Show item detail rfq

Perfection Industrial Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Dept. Sales

4.5" G & L #NC25H, 4'x 6'table, 6'X, 5'Y, 4'Z, 25 HP spindle, 0-1200 RPM, new CNC Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

4.52" Defum #AD115, 63"X,60"Y,rotary table,25 HP,Fanuc OM CNC,retro 1994,#18098   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Cincinnati Gilbert #5J, CNC HBM,table type,53"x 78"table,#7MT,pendant control,7.5-450 RPM,good,1959,#B550038   rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

5" Cincinnati Gilbert, #50 taper,1000 RPM, 48"x 96"table, 30 HP, #12845   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Cincinnati Gilbert #JT, big capacity   Show item detail rfq

DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

5" DeVlieg #54K60, 60"X,72"Y,40"x 60"table,1200 RPM,20 HP,AB Series 9 CNC,#21663   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" DeVlieg #5K-96, 72"X,96"Y,26"Z,50"x96"tbl,1000 RPM,Fanuc 0m (retrofit),S31538   Show item detail rfq

Perfection Industrial Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Dept. Sales

5" Giddings & Lewis #350T, Allen-Bradley 8400,103"X,72"Y travel,1680 RPM,retro 1989   Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

5" Giddings & Lewis #450, MC-50,horiz.bar,81"X,68"Y,68"Z,F 18iMB,50 HP,1991,#89780   Visit Dealer's Equipment Listing  rfq

Sabito Machinery Inc, Concord, ON 905-738-8730 (Fax 905-738-5148) David Slimowitz

5" Giddings & Lewis #70D5T, 72"x156"Tbl,144"cr.tvl,30 HP,Newall Digital Readout,#3893   Show item detail rfq

Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters

5" G & L #80DP5, Heidenhain TNC124 CNC,80.5"X,50"Y,36.5"Z,63"W,60"x 96"tbl Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

5" G & L Fraser #70A-G5-T, G & L 8000M,96"vert.,60"x144"table,#50 taper,1977   Show item detail rfq

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

5" G & L Fraser #70A-G5T,G&L 8000M,132x96x60",#50,1200rpm,48x48"RT,'77,#b575121   Show item detail rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

5" G & L Frazer #A-130T, HBM,72"vert.48"x60"rotary,G&L CNC or manual,IP/UP,v/nice rfq

American Machinery Co Inc, Newtown, CT 203-520-8435 (Fax 203-426-2747) Bill Buckens

5" G & L #G50T, 98"X,84"Y,48"x 96"table,30 HP,G & L 800M CNC,1981,#17358   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #G50-T, 96"X,72"Y,36"Z,48"x96"tbl,48"x60"rotary w/full B-Axis,800 CNC   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

5" G & L #G50TX, new CNC,36"spdl.trvl,84"cr.,96"saddle,51"vert.,(2)48"x 72"tbls Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

5" G & L #MC-50, 40 ATC,66"X,68"Y,(2) 48"x48"pallets,G&L 8000,1993,#20744   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #MC-50, 100 ATC,48"X,44"Y,pllt shuttle,3k RPM,G&L 8000B CNC,rblt'99,#22779   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #MC-50, 100 ATC,48"X,44"Y,pllt shuttle,3k RPM,G&L 8000B CNC rblt'99,#22778   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #MC-50, 120 ATC,66"X,54"Y,pallet shuttle,3k RPM,G&L 8000B CNC'89,#22777   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #MC-50, HBM CNC,36"x48"pllt,48"cross trvl,52"headstock trvl,35"saddle trvl.   Show item detail  Show Video of Item rfq

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

5" G & L #MC-50, CNC table type horizontal boring mill,8000-B CNC ctrl,1997,#1678   Show item detail rfq

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

5" G & L #MC-50, 120 ATC,36"x48"pllts,66"X,65"Y,3k RPM,50 HP,G&L 8000M,'97,#22000   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Giddings & Lewis #PC-50, 96"X, 72"Y, 54"W, 1120 RPM, 800M control, exc.(5940)   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Giddings & Lewis #PC50, 40 ATC,96"X,72"Y,48"x 96"table,G & L 800M,1981,#17372   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #PC50, 803/4M G & L CNC,36"spinning trvl,60"hdstk trvl,60"x 96"tbl,'83   Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

5" Giddings & Lewis #PC50, G&L 800, 48"x 96"table, 72"vert, 96"cross, 1979   Show item detail  Show Video of Item rfq

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

5" G & L #PC-50, 72"X,60"Y,48"x 72"tbl,index table,40 ATC,G&L 800M,1982,#21540   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" G & L #PC50, 48"x 72"tbl,72"X,60"Y,1120 RPM,25 HP,G & L 800M,1977,#15318   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" G & L #PC-50, 48"x72"indexing tbl,#50 tpr,40 ATC,25HP,G&L 800M ctrl,'82,#JV-19277   rfq

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

5" G & L #PMC50, Fanuc 6, 48"x 122"table, 110"cross, 72"vert., #50 taper, #1262   rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

5" Giddings & Lewis, HBM,5-Axis,103"vertical,134"cross,rotary table,retrofit 1996 rfq

Allied Machinery Co, Warren, MI 586-754-9200 (Fax 586-754-5131) Ted Barrie

5" G & L, 84"X,72"Y,60x98"tbl,50 HP,PC based 3D CNC,Sandvik quick ch.tools,rot.tbl   rfq

Ted Grob Sales Inc, Grafton, WI 262-377-8220 (Fax 262-377-0778) Ted Grob

5" G & L, 168"X,96"Y,60"W,1120 RPM,168"x60"table,Mdsi CNC retrofit 2007,S31242   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

5" G & L, 120"X,79"Y,60"x120"tbl,2.5-2000 RPM,63 HP,Heidenhain 530i,reman'02,#22717   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Lucas #30DCS108, 60"x 122"tbl,120"tbl,48"saddle,36"spdl.trvls,12-920 RPM,Fanuc 6   Show item detail  Show Video of Item rfq

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn

5" Lucas #30T, 84"vert, 48"x 84"table, 30 HP, #50 NMT, outboard, 1982   rfq

Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate

5" Lucas #30T99, 108"vert.travel,108"cross travel,60"x 110"table,Fanuc OM   Show item detail rfq

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

5" Lucas #30T99, 3-axis Fanuc OM,108"vert,108"cross,60"x110"table,#50 tpr,#1265   rfq

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

5" Olympia #H80x60 (2B622-1250) 5-Axis Fanuc 16M,49"square B-Axis rotary,50 HP,1996 Show item detail rfq

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

5" Scharmann Ecocut, 90 ATC,pllt shuttle,98"X,78"Y,3k RPM,Siemens 880,rblt'10,#22602   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5" Tos, 13.8", 138"X, 80"Y, 3000 RPM, Heidenhain 415 control   Show item detail rfq

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes

5" Union #KCX-130, Heidenhain TNC426,157"x118"x60",#50 taper,120 ATC,2002,#31080 rfq

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) Sales Dept.

5" Union #KCX130, 157"X,118"Y,100"x80"contouring tbl,80k lb.cap,6k RPM,120 ATC,'04   Show item detail  Show Video of Item rfq

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

5" Wotan, boring mill, 39.5"x 49.5"x 39.5", rotary, Fanuc OM control, 1990's   Show item detail rfq

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

5.1" Doosan #DB250CM, 31iMB,71"x79",118",78.7",63",20",.001°,6000rpm,40atc,CTS,'11   rfq

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

5.11" Tos #WHN13, 137.8"X,98.4"Y,49.2"Z,360°B (rotary tbl),Heidenhain iTNC 530,2008   Show item detail rfq

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

5.12" Daewoo #ACE-B130, 118"X,79"Y,27.5"Z,44"W,63"x71"r/tbl,60 ATC,Fanuc 16mc,'99   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

5.12" G & L #A130T,1120RPM,#50,60x120tbl,108X,96Y,36"Z,54"W,G&LM400 ctrl,30HP,'80   rfq

Lindoco Machinery, Peoria, IL 309-256-1065 (Fax 309-966-2355) John McEllin

5.12" Kuraki #KBT13E, 60 ATC,118"X,78"Y,B-Axis rotary table,TSC,Fanuc 18i,'09,#22335   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Microcut #HBM4T, 78"X,78"Y,55"x63"B-Axis tbl,Fanuc 31i,60 ATC,new,#21985   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Microcut #HBM5TL, 177"X,125"Y,98"x98"B-Axis tbl,Fanuc 31i,60 ATC,2012,#22030   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Pama Center, 5-axis,49"pllts,60"X,72"Y,60atc,40HP,Heidennain retro'06,#17557   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" SMTCL #PBC-130R, 40 ATC,138"X,78"Y,78"x78"r/tbl,3k RPM,Fanuc 18i,'08,#22567   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Tos #WHN-13, 137"X,78"Y,Heidenhain 415 CNC,70"x 86"totary,1994,#22266   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Tos #WHN13.8A, 138"x80"x31"x49",1k RPM,rotary,Heidenhain CNC,'82/'08,#21498   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Tos #WHN13.8A, 138"X, 80"Y, 31"Z, ISO50 tpr,63"x71"built in rotary tbl,50 HP,1000 RPM,pwr.drawbar,1982,retro.2008   Show item detail rfq

VTL Solutions Inc, Houston, TX 832-545-4141 () Sean Moynihan

5.12" Toshiba #BTD-130H.R22, ATC,118"X,90"Y,r/tbl,2500 RPM,Tosnuc 999,'10,#20775   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Toshiba #BTD-13R22, 60 ATC,118"X,90"Y,coolant,rotary tbl,Tosnuc 777,'95,#21777   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.12" Toshiba #BTD-13R22, 118"x90.5"x63",70.8"x86.6"tbl,60 ATC,Tosnuc 777-2,'95   Show item detail rfq

Perfection Industrial Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Dept. Sales

5.12" Microcut #HBM 5T, 60 ATC,ram,137"X,102"Y,3k RPM,rot tbl,Fanuc 31i,'12,#21897   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.3" Cincinnati Gilbert,132"X,84"Y,36"Z,48"W,60x132"tbl,1500rpm,F16iM,retro'03,#22341   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.3" Cincinnati Gilbert, 108"X,84"Y, 60"x 120"table, ball screws, AB 7300, #22521   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.31" Hyundai Kia #KBN135C, 118"X,78"Y,Fanuc 31 CNC,B-Axis Tbl,40 ATC,2011,#21819   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.37" Cincinnati Gilbert #J, 108"X,84"Y,36"Z,77"W,60x132"tbl,1500 RPM,#50,AB7300,'79   rfq

Lindoco Machinery, Peoria, IL 309-256-1065 (Fax 309-966-2355) John McEllin

5.37" Cincinnati Gilbert MacroCenter,120"y,192"x,60"x192",30HP,F18M,retro'02,#22173   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.5" Kuraki #KBT-15BDX, F15M,78"x86"tbl,118"X,90.5"Y,63"Z,27"W,40 ATC,CTS,C/C,'99   Show item detail rfq

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

5.9" Scharmann #EcoCut, ATC,63"x93"2-pllt shuttle,118"X & Y,Siemens 840C,'94,#22404   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5.9" Scharman HeavyCut, 118"X,118"Y,ATC,AAC,60"x90"pllt,Siemens CNC,1995,#17496   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" G & L #70-H6-T, CNC,G&L 800 ctrl,6"spdl.,50 tpr,72"x144"tbl,1969,#B575120   Show item detail rfq

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

6" Giddings & Lewis #70H6T, 48"spdl.tvl,60"x144"tbl,132"cr.tvl,51"saddle tvl,'70,#3892   Show item detail rfq

Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters

6" G & L #70-H6-T, 132"X,96"Y,60"x144"tbl,ball screws,40 HP,G & L 800P,'88,#22228   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" Giddings & Lewis #70-H6-T, 108"X,84"Y,60"x120"Tbl,Fanuc 18M,Retrofit '99, #21602   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" G & L #G60-RTX, 60 ATC,96"X,72"Y,48"x 72"B-Axis rot.table,G&L 800M,'83,#22543   Show item detail  Show Video of Item rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" Giddings & Lewis #G60-RTX, 48"x72"rot.tbl,36"spdl,96"cr.tvl,G&L 800M Ctrl,'82,#3890   Show item detail rfq

Abbott Machine Co, Alton, IL 800-262-6478 (Fax 618-465-2495) Mike St. Peters

6" Giddings & Lewis #G60-T, G&L 8000M-B CNC ctrl,2500 RPM,60"x 96"table,1991   rfq

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

6" G & L #G60T, 60"x120"tbl,48"x60"rot.tbl,120"cr,96"vert.trvls,100 ATC,8000B Ctrl,'97 rfq

Machinery Acquisitions Int'l, Houston, TX 713-467-9081 (Fax 713-672-7905) Ron Braman

6" Giddings & Lewis #G60T, 60"x120"tbl,120"X,96"Y,2500 RPM,R/T,100 ATC,'97,#15496   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

6" G & L #G60-TX, ATC,144"X,120"Y,60"x144"tbl,rotary tbl,G&L 800M CNC,'93,#22384   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" Giddings & Lewis #MC-60, 120 ATC,36"x48"pllts,66"X,65"Y,G&L 8000M,'86,#22638   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" Giddings & Lewis #MC60, CNC HBM - HMC, 1998, #60347-SC   Show item detail rfq

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

6" Lucas #40T, 5-Axis CNC HBM-T, 158"X,120"Y,50 HP,1440 RPM,Fanuc 150M,#ID17137   rfq

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

6" Lucas #40T88, 60"x 110"table, 96"X, 96"Y, #50 PDB, 1120 RPM, 50 HP, 1979, #15257   Show item detail rfq

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

6" Lucas #642B120, new CNC,108"X,120"Y,156"W,36"spindle trvl,60"x 120"tbl   Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

6" Schiess #BF160T25, Mits.330, 72"x 72"rotary table, 98"X,72"Y,50"Z, 1990 retro.   Show item detail rfq

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

6" Sundstrand #S80 Omnimill, 72"X,65"Y,54"Z,30"W,new CNC,60"pllts,60ATC,#50 tpr   Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

6" Union #CBFK150, 63"x 79"table, 80 ATC, 98"X, 78"Y, 62"Z, 27"W, #S-14512   Show item detail rfq

U S Equipment Co, Detroit, MI 313-526-8300 (Fax 313-526-5303) Sales

6" Union, 63"x 78.75"RT table, 108"X,72"Y,62"Z, Fanuc 0 CNC Show item detail rfq

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

6.3" Wotan Horizontal Boring Mill   Show item detail  Show Video of Item rfq

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

6.3" Wotan, CNC HBM-T, 137"X, 118"Y, 50 HP, 2000 RPM, Siemens 840   rfq

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

7" Ingersoll #2, CNC, 312"x144"tbl, 26'cr.tvl, 120"vert.tvl, motorized out board support, pwr.drawbar, new servos, retro.'07   Show item detail rfq

VTL Solutions Inc, Houston, TX 832-545-4141 () Sean Moynihan

7.8" Titan #AFP200, 590"X,197"Y,35"Z,55"W,79"V,733 rpm,Siemens 840d SL,'86,S30891   Show item detail rfq

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

9.8" Doosan #DBC250CM, 118"X,78"Y,B-Axis rotary tbl,Fanuc 18i,60 ATC,2006,#22292   Show item detail rfq

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

Butler Hi Power #LE28/10 Elgamill,Siemens or new CNC,394"x,110"y,41"z,50atc,'85 Show item detail rfq

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Cincinnati Gilbert Series J, boring mill with Allen Bradley CNC control, #8637   Show item detail rfq

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

Kuraki #KBT-10DXA, Horizontal Boring Mill, CNC rfq

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Tos Varnsdorf #WHN-13, CNC horizontal table type (T-Type) boring mill, Heidenhain TNC 426C control, 1998   Show item detail rfq

Rise Tek Inc, Brampton, ON 905-487-3464 (Fax 905-487-3465) Kulwant Chalotra

Toshiba #BTD-13R22, Tosnuc 777.2 Ctrl,118"Cr,90"Vrt,73"Long,70"x84"Table,2500 RPM rfq

Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Fax 847-968-2001) Frank Turi

Back to category listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise
Privacy Policy