Used BENDERS, BAR, PIPE & TUBE, CNC: Machinery & Used Equipment For Sale

CNC MACHINERY & EQUIPMENT:
BENDERS, BAR, PIPE & TUBE, CNC

There are 52 listings in this category
File update: Thu, Mar 18, 2010 01:27

ORIGINAL SORT

Sort by Location
Sort by Date
Advanced Search

7/8" Langbow #MNC20 Multibend, 6-axis CNC,elec.bend/pos,touchscreen ctrl,1999

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

1" Addison #DB25ST3, 3-axis CNC Databend,triple radius,PDA,mandrel,in stock,'99

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

1" Crown Patriot #RDB10NM CNC, 3-stack, PC based control, 2002 (8850)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

1-3/8" Pines #3/4, mandrel, digital Dial-A-Bend control, clean, tooling, 1992

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

1-1/2" Addison #DB40, Bender, 3-axis, CNC, PDA, mandrel, rebuilt in 2002

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

1-1/2" Addison #DB40, 3-axis, CNC Databend, manual, PDA, DAPD, 1990's

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

1-1/2" Eaton Leonard #VB150GPL, extractor, Premier CNC, 1995, #S26032

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

1-1/2" Eaton Leonard #VB150-GPL, Premier CNC,motorized carriage,1995,#15968

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

1-1/2" Pines CNC, PDA, 10' Mandrel, Pedestal Operator Station, TS-2000 CNC, 1987

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

1-1/2" Pines #CNC040, mandrel extractor,TS-2000 CNC,1997,(2) in stock,#s26981

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

1-1/2" Soco #SB-38NC, bender, 1-1/2"OD, NC control, 2007

Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Fax 905-803-9109) Bernie Walters

1.77" Bema #G45CND, CNC,Bema CN2000,9"max.bend radius,133"max.length,#77197

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

2" Adaptive Motion #EB503SB,5-ax.,multistack,comp.bend load,inline cut-off ldr,'96

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

2" Adaptive Motion #EB503-SD, Haven 24'feed, 5-axis CNC, 1999, #S24514

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

2" Chiyoda #SP50ST RH, 2 stack, fully optioned, good condition, 1990, #954

Advantage Discount Machinery Inc, Washington, MI 586-281-3017 () Robert Tank

2" Eaton Leonard #VB200HP, mandrel extractor,EL2000 CNC,in plant,1989,#s27030

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

2" Eaton Leonard #VB200HPR, CNC Premier ctrl, fully optioned,good cond.,#944

Advantage Discount Machinery Inc, Washington, MI 586-281-3017 () Robert Tank

2" Pines #YBC or XYZ, Adaptive Motion, programmable touch screen, 12/2006

Inter-Plant Sales, Hugo, MN 612-281-3736 (Fax 651-207-8933) Rick Canniff

2-1/2" Addison #AB60, CNC tube bender, tooling, 1995

International Machinery Sales, Lancaster, SC 803-286-5875 (Fax 803-286-5898) Wayne Earl

2-1/2" Chiyoda #SP-60ST, extractor, dual radius, 3-axis CNC, 2000, #S25463

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

2.5" Chiyoda #SP60ST, 3-axis CNC,dual rad.press,die assy,2.5"x149"wall,2000,#15248

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

2-1/2" Clark & Lewis #CL200HD,Degree & Plain-A-Bend,mandrel ext.,rblt.'92,529 hrs.

Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch

2-1/2" Eagle #DB60LH, Bend Pro ctrl,new manifold & hydraulics,servo drive,#934

Advantage Discount Machinery Inc, Washington, MI 586-281-3017 () Robert Tank

2.5" Schwarze-Wirtz #CNC-60-DB, Robitec CNC,pressure die assist,tooling,1997,#17860

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

2-1/2" Soco #SB-63NC+MP, tube bender, .098"cap., 80"tube length w/mandrel, 10"max.bend radius, 185°

Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Fax 905-803-9109) Bernie Walters

2-1/2" Starbend #STAR 650 CNAC, mandrel,dbb stops,lg.tooling pkg,in stock,2000

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

3" Addison #DB76, Data Bend CNC,3"x .120"wall,126"tube length,c.clockwise,1995,#17234

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

3" Addison #DB76, Data Bend CNC,3"x .120"wall,dual stack head,power carr.,#17235

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

3" Criterion, .147 wall, 3-axis CNC, multi radius cap., PDA, mandrel, 2003

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

3" Crown #RDB76-E, extractor, CNC, 2002, #S27129

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

3" Eaton Leonard #VB300, 3-axis CNC Premier,RH,PDA,mandrel,low cost,in stock

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

3" Eaton Leonard #VB300, CNC 2-axis,hyd.,12'tube length,rebuilt/retro by SMT,2003

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

3" Eaton Leonard #VB300, Bender, 3-axis CNC, LH, PDA, mandrel, In Stock

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

3" Eaton Leonard #VB300HS, Premier Touch Screen CNC,12"max.radius,'88 rblt.'98,#17041

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

3" Eaton Leonard #VB30C Vector, hydraulic,VE-LOC ctrl,tooling,Ser.#VB30C-290-HR

Investment Recovery Services, Fort Worth, TX 817-222-9848 (Fax 817-834-4075) Mike Frost

3" Eaton Leonard #VB300HS, Premier CNC,pressure die assist,3"x.120",retro'97,#15857

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

3" J.A. Richards #10 rotary, programable controls, 7.5 HP, 220/440V., 3 ph.

Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson

3" Pines, horizontal, digital Dial-A-Bend, mandrel extractor, 1970

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

3" Socco #SB-75x4B-1S, 4-axis CNC, 3"OD x .10"wt x 1.5d, 10"max.clr, 2002, #18194

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

3-3/8" Lang #80CNC-MR-RH, 3 stack,fully loaded,elec.servo on mandrel,2003,#985

Advantage Discount Machinery Inc, Washington, MI 586-281-3017 () Robert Tank

3-1/2" Pines CNC, XYZ Adaptive Motion prog.Touch Scrn, bender, MDL-AD-35

Inter-Plant Sales, Hugo, MN 612-281-3736 (Fax 651-207-8933) Rick Canniff

4" Coast #1004CNC-A, 4" Sch. 80, pwr.load & rotation for angle, 1991 (5942)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

4" Coast #4HRD-B-PC, 4" Sch. 80, perfect, factory rebuilt & retro 2002 (5944)

Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.

4" Coast Wallace #1004-CNC-A,Allen-Bradley PLC-5 ctrl,color display,tooling,1991

Machinery Acquisitions Int'l, Houston, TX 713-467-9081 (Fax 713-672-7905) Ron Braman

4" Coast Wallace #HRDBPC,A-B Penelview 1000,color display,clockwise rot.,retro'02

Machinery Acquisitions Int'l, Houston, TX 713-467-9081 (Fax 713-672-7905) Ron Braman

4.5" Addison #DB120,.335"wall thickness,direct act.pressure die,pwrd carriage for Plane Of Bend,4-Axis,'99

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

4.5" Conrac Digicon #225-SX, digital prog.ctrl,hyd.manrel extractor,overarm support,1983,#9622

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

5" Horn Machine Tools #3, CNC,3-axis AMCS ctrl,PDA,mandrel,drop-away clamp,2001

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

6" Pines #4, bender,RH,touch screen PDA,MAN,direct act.clamp/pressure,hi-spd,refurb.

AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman

Bema Rekord #25, 5mm automatic tube bender,Bema ctrl,CT25 auto loader,1999

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley

Pines #106 Coaxie Bender, CNC, RH & LH, carriage, 110 cord.

Ultimate Tube Bender Parts Pl, Brighton, MI 810-844-0233 (Fax 810-844-0234) Dave Ulrich

Schwarze CNC 60 Tube bender, low price, 1987

Kraemer Machine Tools LLC, Waukesha, WI 262-544-4478 (Fax 262-548-1084) Greg Kraemer

Back to category listings.

= photo available Spec sheet

= spec sheet available Request a quote

= request quote from seller Video Available

= video available Visit Dealer's listings

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

http://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Advertise
Privacy Policy

CNC MACHINERY & EQUIPMENT:BENDERS, BAR, PIPE & TUBE, CNC

CNC MACHINERY & EQUIPMENT:
BENDERS, BAR, PIPE & TUBE, CNC