SHEARS, POWER SQUARING AND PLATE (INCHES)

 Surplus Record
Prestige Equipment provides surplus machines
There are 406 listings in this category
File update: Fri, Nov 20, 2009 01:24 		ORIGINAL SORT Sort by Location
Sort by Date
Advanced Search
1/8" x 24" Pearson, hydraulic shear, 1970, #52110  Show photo of item Show item detail Request quote from Seller
Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.
1/8" x 120" Niagara #610, mech,ROBG,2 front sht.supports,sq,arms,flush flr mnt  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
.135" x 10' Accurshear #813510, power shear, 3 phase 575 voltage, #108733  Show photo of item Show item detail Request quote from Seller
National Machinery Exchange, Newark, NJ 973-344-6100 (Fax 973-589-0944) Robert Pinelli
5/32" x 6'7" Adira #GHL0420, hydraulic shear,squaring arm,adj.rake & blade clearance,29-70 spm,1998,#17945  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/16" x 18" Cincinnati #2518, 36"FOPBG,10"lh.sq.arm,frt.supprts,25"gap,1960,#8073  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
3/16" x 4' Niagara #64, 24"FOPBG, full length foot treadle, 65 SPM, #24199  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
3/16" x 4' Wysong #748, power shear, FOPBG, front sheet supports  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3/16" x 6' Amada #M2045, mechanical shear, FOPBG, 5'squaring arm, support arm, 1984, #18398  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/16" x 6' DiAcro Promecam #GTH420, hyd.,2000mm x 4mm mild steel,FOPBG,good  Show photo of item Request quote from Seller
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Fax 256-536-1322) Ron Hardy
3/16" x 6' Lodge & Shipley #0306-SL, shear,36"FOBG,6'sq.arm,60 SPM,painted,#015882S  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
3/16" x 6' Lodge & Shipley, power shear,36"FOPBG,5'sq.arm,air clutch & brake,#24053  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
3/16" x 8' Amada #M2545, mech.shear,sq.arm,36"prog.BG,sheet lifters,7.5 HP,1984  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
3/16" x 8' Amada #M2545, mech.power shear,6'sq.arm,digital,FOPBG,support arms  Show photo of item Show item detail Request quote from Seller
Scott Machinery, McClellan, CA 916-638-7718 (Fax 916-638-2450) Deanna Payne
3/16" x 8' Amada #M2545, power shear, FOPBG, 1980  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
3/16" x 8' Amada #M2545, front operated power back gauge, 1980  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
3/16" x 8' Amada #M2545, front operated power back gauge, 1980, #8580  Show photo of item Show item detail Request quote from Seller
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig
3/16" x 8' Amada, shear, mechanical, 31"FOPBG, 1987  Request quote from Seller
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Fax 513-575-3997) Chris Wilson
3/16" x 8' Cincinnati #1008R, power shear,FOPBG,8'squaring arm,2-80"front supports,air trip cl,#6396  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/16" x 8' Cincinnati #1408, power shear, 36"power back gauge, 1975, #s27278  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3/16" x 8' Lodge & Shipley #0308, power shear, FOPBG w/ind., air clutch, #8433  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/16" x 8' Niagara #78B, power shear, 24"back ga., 65 SPM, 5 HP, no square arm  Show photo of item Request quote from Seller
Metal Fab Machinery Inc, Cold Spring, MN 320-685-8819 (Fax 866-206-1974) Curt Olafson
3/16" x 8' Tomita Iron Works, hyd. shear, front op. manual backgauge, 6" sq. arm.  Show photo of item Request quote from Seller
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Fax 305-638-3524) Sales
3/16" x 8' Wysong #796, power shear, 24"FOMBG, foot pedal, 7.5 HP, 1955  Request quote from Seller
HCI Machines, Venetia, PA 724-942-3382 (Fax 724-942-5194) Terry Blackman
3/16" x 8' Wysong #796, power shear, FOPBG, squaring arm, #015226S  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
3/16" x 10' Cincinnati #1410, power shear,ROMBG,squaring arm,hyd.holddowns,1952  Show item detail Request quote from Seller
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
3/16" x 10' Cincinnati #1410, mechanical, FOPBG, squaring arm, sheet supports, 1970  Show photo of item Request quote from Seller
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch
3/16" x 10' Cincinnati #1410, FOPBG, squaring arm, supports, excellent, 1976  Request quote from Seller
Estes Machinery Co, Chicago, IL 312-543-6772 () Peter Estes
3/16" x 10' Columbia #4PSG-10, mechanical shear,ROBG,5 HP,60 SPM,10'3"BH,sq.arm,Ser#W160-48  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
3/16" x 10' Elga Hydrapower #10316, hydraulic shear, FOPBG w/indicator, square arm, #9114  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/16" x 10' Lodge & Shipley #S0310AB, pwr shear,18-1/2"thrt,10'4"DBH,60spm,#108211  Show photo of item Show item detail Request quote from Seller
National Machinery Exchange, Newark, NJ 973-344-6100 (Fax 973-589-0944) Robert Pinelli
3/16" x 10' Wysong #1010RD, power shear, 8'LH squaring arm, 24"FOMBG, mint, 1977, tag #15015  Show photo of item Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
3/16" x 10' Wysong #7-120, power shear,24"ROBG,6'sq.arm,support arms,#11447  Show item detail Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
3/16" x 10' Wysong #7-120, power shear, ROMBG, squaring arm, ft. support, #9478  Show photo of item Show item detail  Show Video of Item Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/16" x 12' Wysong #7-144, power shear,48"FOPBG,10'squaring arm,3 front arms,scrap conv,ser.#P22-193  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
3/16" x 12' Wysong #7-144, shear, powered back gauge, 1974, stock #12628j  Show photo of item Show item detail Request quote from Seller
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
3/16" x 12' Wysong #7-144, mech shear, Ser.P22-205, front arm supports, 1974  Request quote from Seller
HCI Machines, Venetia, PA 724-942-3382 (Fax 724-942-5194) Terry Blackman
3/16" x 12' Wysong mechanical shear, 48"power back gauge, 10'sq.arm, 1970  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
3/16" x 13' Amada #M4045, mech.shear,FOPBG,new clutch/brake/main shaft,'80  Show photo of item Show item detail Request quote from Seller
Erickson Machine Tools Inc, Story City, IA 800-247-3905 (515-733-2929) Terry Lake
3/16" x 13' Cincinnati #1813, power shear, 24"back gauge  Show photo of item Show item detail Request quote from Seller
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell
3/16" x 14' Cincinnati #1814, power shear, 36"FOPBG  Show photo of item Request quote from Seller
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Fax 305-638-3524) Sales
3/16" x 14' Cincinnati #1814G, power shear,48"CNC back gauge,front gauging,squaring arm,1990,#17747  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/16" x 18' Cincinnati #2518, power shear, FOPBG, squaring arm, 25 HP  Show photo of item Show item detail Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3/16" x 18' Cincinnati #2518, power shear,FOPBG,hydraulic holddowns,auto.lube,foot treadle,ser.#13912,#6831  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/16" x 18' Cincinnati #2518, mechanical shear, 36"FOPBG, squaring arm, front supports [20443]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
3/16" x 18' Cincinnati #2518, power shear, ROPBG, 13'squaring arm, 40 spm, hydraulic holddowns, #25284  Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord
3/16" x 18' Cincinnati #2518G, Shear, 36" FOPBG, sq. arm, low price, #10926  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
3/16" x 18' Cincinnati #2518G, Power Squaring Shear, 50 SPM, 1950  Show photo of item Show item detail Request quote from Seller
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott
1/4" x 12" Pearson Hydraulic Guillotine Shear, Used  Show photo of item Show item detail Request quote from Seller
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Fax 425-513-8264) Mary Van Gerpen
1/4" x 4' Niagara #74, mechanical shear, ROMBG, underdriven
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 4' Wysong #425, power shear, FOMBG w/indicator, auto lube, foot treadle, #9844  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 4.3' Uni-Hydro, hydraulic shear,16 spm,220 V.,3 ph.,stock #4193  Show photo of item Show item detail Request quote from Seller
Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson
1/4" x 6' Amada #M-2060, mechanical shear, FOPBG, 1980
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 6' Atlantic, hydraulic,SP8 ctrl,39"back gauge,43"sq.arm,blade gap,in stock  Show photo of item Show item detail Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
1/4" x 6'-10' Cincinnati #18, back gauges, microcomputer control, 2000 (7) in stk.  Request quote from Seller
Universal Press & Machy Inc, Clinton Township, MI 586-569-0150 (Fax 586-569-0103) Jim/Tris/Phil
1/4" x 6' Cincinnati #1806G, mechanical, FOPBG, 1998, #8751  Show photo of item Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 6' Cincinnati #1806R, power back gauge, 10 HP, squaring arm, 1967  Request quote from Seller
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston
1/4" x 6' Cincinnati #1806RG, micro-computer control, 1998, (3) available  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 6' Cincinnati, 36"FOPBG, 7'squaring arm, vertical ram adjustment, #23973  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 6' Columbia #406PSG, power shear,6'sq.arm,front support with stops,#11486  Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
1/4" x 6' Dreis & Krump #UA6250, hyd.shear,39"FOPBG,sq.arm,front sup,15 HP,#8557  Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 6' National #NH7225, hydraulic shear, back gauge, front supports, new, in stock [21306]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 6' Niagara #76, mech.shear, flush floor, 24"ROMBG, air foot switch  Show photo of item Show item detail  Show Video of Item Request quote from Seller
Red Star Machinery Sales & Au, Barling, AR 479-996-0118 (Fax 479-996-0100) David Lee
1/4" x 6' Niagara #76, undrdrvn,24"rombg,4-way blds,7.5hp,inlaid tbl scales,sq arms  Show photo of item Show item detail Request quote from Seller
John LoVerde Machinery Sales, Point Pleasant, NJ 732-829-8350 (Fax 732-746-3215) John LoVerde
1/4" x 6' Niagara #76B-1/4, power shear, FOPBG w/ind., squaring arm, #9487  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 6' Niagara #I-6, hyd,18"gap,FOPBG,sq.arm,2 front supports,flush flr mnt  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
1/4" x 6' U.S. Industrial, hydraulic, FOPBG, 2005  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
1/4" x 6' Wysong #625, mechanical shear,36"FOPBG,squaring arm,front arm,1957  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
1/4" x 6' Wysong shear, 8-1/2'squaring arm, support, motorized back gauge  Show photo of item  Show Video of Item Request quote from Seller
Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Kris McHugh
1/4" x 6.6' Amada #M-2060, power shear,40"FOPBG,adj.shearing width,80"sq.arm,1980  Show photo of item Request quote from Seller
MI-RO Machinery Corp, Iselin, NJ 732-283-0834 (732-283-0833) Michael Lachant
1/4" x 8' Betenbender, Shear, hyd, FOPBG, supports, 1985  Request quote from Seller
Foster Machinery Co Inc, Charlotte, NC 704-847-9449 (Fax 704-846-2645) Craig Foster
1/4" x 8' Betenbender, hydraulic, FOPBG, runs like new  Request quote from Seller
Atlantic Machinery Inc, Miami, FL 305-635-6631 (Fax 305-635-0418) Bob Darlow
1/4" x 8' Cincinnati #1808, mech.shear, FOPBG,(2) FSA, 6'sq.arm,9'rlr.table,1964  Request quote from Seller
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Fax 715-886-3016) Fred Parker
1/4" x 8' Cincinnati #1808, power shear, FOPBG w/indicator, front supports, dual counter balance, #9673  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 8' Cincinnati #1808, power shear, CNC front & rear gauging, 1998  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
1/4" x 8' Cincinnati #1808, CNC front & rear gauging, 1998  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
1/4" x 8' Cincinnati #1808, power shear  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 8' Cincinnati #1808G, CNC front & rear gauging, 1998, #8579  Show photo of item Show item detail Request quote from Seller
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig
1/4" x 8' Cincinnati #1808G, FOPBG, programmable control, 2002 (2)  Show photo of item Show item detail Request quote from Seller
Planet Machinery Co, Pontiac, MI 248-335-8330 (Fax248-335-3680) Ken/ Chris
1/4" x 8' Dreis & Krump #186, Power Leaf Brake, Ser.118685, Stk.#54213  Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/4" x 8' Fabmaster, hydraulic, 36"FOPBG, installed new in 2008
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 8' Hercules #57M601, power shear  Request quote from Seller
Bill Simon Equipment Inc, Alton, IL 618-462-6878 (Fax 618-462-6886) Bill Simon
1/4" x 8' Lodge & Shipley #0408, mechanical shear,front operated back gauge,1963  Show photo of item Show item detail Request quote from Seller
Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney
1/4" x 8' Lodge & Shipley #0408-SL, power shear,air clutch,FOMBG w/ind.,squaring arm,supports,#9486  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 8' Lodge & Shipley #H300-10, Ser.14387, Stk.#54126-0408=48575  Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/4" x 8' Pearson, hydraulic shear, FOPBG, ball transfers, squaring arm, #3586  Show photo of item Show item detail Request quote from Seller
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman
1/4" x 8' Wysong power squaring shear, stock #52618  Show photo of item Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/4" x 10' Accurshear #625010, hyd., 36" FOPBG w/readout, adjustable stroke, adjustable blade gap, 4'sq.arm, 1988  Show photo of item Show item detail Request quote from Seller
Metalfab Inc, Indianapolis, IN 317-733-0268 (Fax 317-733-0283) Karl Vanderbur
1/4" x 10' Accurshear #825010, FOPBG, squaring arm, stroke ctrl, 1984, #8728  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Accurshear #825101, power shear,20 HP,36"hydraulic BG,hand slots,12"gap in side frames,#8754  Show photo of item Show item detail Request quote from Seller
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
1/4" x 10' Accurshear #825101 H.D., power shear,squaring arm,back gauge,#015236S  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
1/4" x 10' Accurshear, 96" SA, FOPR back gauge, extra set blades, 1992  Show item detail Request quote from Seller
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey
1/4" x 10' Accurshear, hydraulic, 20 HP, 12"gap, 1x3 blades, 36"BG, hyd hold downs, 3 hand slots, #8754  Show photo of item Show item detail Request quote from Seller
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
1/4" x 10' Accurshear,Hyd, 36" prog.G,pwr.bld.clear, rear sht.support,ball trnsfr,'00  Show photo of item Show item detail Request quote from Seller
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
1/4" x 10' Acra-Cut, hyd.,36"FOPBG,sq.arm,sup.arms,blade gap,15 HP,2005,#7507  Show photo of item Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
1/4" x 10' Adira #GHS-0630, hyd.shear,40"FOPBG,PLC control,squaring arm,2000  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
1/4" x 10' Alsteel #1/4-10, power shear,11 hld.dwns ram,12"gap,rake angle cont,auto lube,6'squaring arm,BG readout,1981  Show photo of item Show item detail Request quote from Seller
Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Fax 905-803-9109) Bernie Walters
1/4" x 10' Amada #M3060, power shear, 36"power back gauge, 1983, #S24219  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 10' Amada #M3060, power shear, 60 SPM, 10' sq.arm, 2 front supports, 1984  Request quote from Seller 
Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.
1/4" x 10' Amada #M-3060, programmable FOPBG w/inch & metric readout,back gauge sheet supports,hyd.holddowns,1996,#A1042  Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Amada #M3060, mech.shear,40"CNC BG,sq.arm,60 SPM,15 HP,'83,#13562  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/4" x 10' Amada #M3060, power shear,FOPBG,in/mm RO,squaring arm,front support,12.5 HP,ser.#3060154  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Amada #M3060, mechanical shear,10'squaring arm,2 front support arms,60 spm,CNC back gauge,1987,#17586  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/4" x 10' Amada #M3060, front operated power backgauge, squaring arm, 1991  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
1/4" x 10' Amada #M3060, 8'sq.arm,4 front support arms,FOBG,60 spm,1993  Show photo of item Show item detail Request quote from Seller
Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.
1/4" x 10' Amada #M3060, programmable back gauge, squaring arm, 1991, #8623  Show photo of item Show item detail Request quote from Seller
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig
1/4" x 10' Amada #M3060, programmable BG,pnuematic support,sq.arm,1988,#8636  Show photo of item Show item detail Request quote from Seller
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig
1/4" x 10' Amada #M3060, used mechanical shear  Show photo of item Show item detail Request quote from Seller
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Fax 425-513-8264) Mary Van Gerpen
1/4" x 10' Amada #M3060, power shear,FOPBG with inch/metric readout,1986,#9544  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Atlantic #HDE, power shear, 10'squaring arm, 15 HP, 1989  Request quote from Seller
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.
1/4" x 10' Atlantic, hyd.,SP8 ctrl,39"back gauge,43"sq.arm,blade gap,(9) in stock  Show photo of item Show item detail Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
1/4" x 10' Bautar, mechanical shear,29"FOPBG,squaring arm,2 support arms  Show photo of item Request quote from Seller
Excel Machinery, Clinton Township, MI 586-226-8800 (Fax 586-226-8999) Vince Gerlado
1/4" x 10' Cincinnati #1810, power shear,36"FOPBG,10'sq.arm,foot switch,#22198  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 10' Cincinnati #1810, P.F.O.B.G., Auto Shearing Probes, 1977  Show photo of item Show item detail Request quote from Seller
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth
1/4" x 10' Cincinnati #1810, auto shear,36"FOPBG,77"LH sq.arm,4 probes,10 HP,1993  Show photo of item Request quote from Seller
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell
1/4" x 10' Cincinnati #1810, power shear, back gauge, squaring arm, 1954  Show photo of item Show item detail  Show Video of Item Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
1/4" x 10' Cincinnati #1810, power shear,36"FOPBG,10'sq.arm,60 SPM,#23247  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 10' Cincinnati #1810, 36"FOPBG,10'LH sq.arm,frt supprts (2),ser.35669  Show photo of item Show item detail Request quote from Seller
HPI Machinery Sales, Hartland, WI 262-538-1147 (Fax 262-538-1327) Dan Huck
1/4" x 10' Cincinnati #1810, mechanical shear, 48"FOPBG, hi-speed, 100 spm
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 10' Cincinnati #1810, power shear,36"FOPBG,10'sq.arm,60 spm,#11483  Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
1/4" x 10' Cincinnati #1810, power shear,FOPBG w/indicator,sq.arm,front supports,dual counter balance,#9687  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Cincinnati #1810, mechanical shear, 36"FOPBG, square arm, 2 arm supports, #8722  Show photo of item Show item detail Request quote from Seller
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
1/4" x 10' Cincinnati #1810, mechanical shear, 36"FOPBG, 7-1/2 HP, clean, 1966 [21512]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 10' Cincinnati #1810, power shear, 36"FOPBG, 1966 (8592)  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Cincinnati #1810, Power Shear, Ser.34818, Stk.#54192  Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/4" x 10' Cincinnati #1810, power shear,FOPBG,10'squaring arm,F-arms,1968  Request quote from Seller
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
1/4" x 10' Cincinnati #1810G, mech,36"FOPBG,sq.arm,front supports,1995,#8702  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Cincinnati #1810G, shear  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 10' Cincinnati #1810G, FOPBG, Micro Gage control, 2000, #8752  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Cincinnati #1810G, shear,multi-axis front & rear CNC gauging,'96,#s27157  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 120" Cincinnati #2500, hydraulic, 36"BG, CNC control, 1986  Show photo of item Show item detail Request quote from Seller
Centra Corporation, Baltimore, MD 410-945-0040 (Fax 410-945-0074) Ed/Mike/Thomas
1/4" x 10' Cincinnati #2500 Century, 48"pwr back gauge,Cincinnati CNC,1986,#s27746  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 10' Cincinnati #2500X10, Hydraulic Power Squaring, Ser.44635, Stk. #54899  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/4" x 10' Cincinnati #2CC10, 10'7"L bed,3-3/4"thr.,10'3"WBH,10 holddowns,#107690  Show photo of item Show item detail Request quote from Seller
National Machinery Exchange, Newark, NJ 973-344-6100 (Fax 973-589-0944) Robert Pinelli
1/4" x 10' Cincinnati #2CC10, power shear,36"FOPBG,sq.arm,sheet supports,1984  Request quote from Seller
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn
1/4" x 10' Cincinnati #2CC10, mechanical, power shear, 36"FOPBG, 1979
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 10' Cincinnati #2CC10, FOPBG, Micro gauging, 1983, #8656  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Cincinnati #2CC10, mech, 36" FOPBG, 1992  Show photo of item Show item detail Request quote from Seller
Centra Corporation, Baltimore, MD 410-945-0040 (Fax 410-945-0074) Ed/Mike/Thomas
1/4" x 10' Cincinnati, shear blades [15120]  Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 10' Cincinnati, mechanical shear, 36"FOBG, arm supports, squaring arm  Request quote from Seller
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
1/4" x 10' Cincinnati-Rhodes #1810, shear,48"FOPBG,conveyor/stacker,1984,#14239  Show photo of item Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
1/4" x 10' Clearing Niagara #IF-10-1/4II, power shear,Niagara MPC 2100 prog.digital FOPBG,gap adj.,1995,#9724  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Columbia #0410, Mechanical Shear, 7.5 HP, FOPBG  Request quote from Seller
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Fax 715-886-3016) Fred Parker
1/4" x 10' Darley #GS3000x6, shear,39"FOPBG,sq.arm,blade gap adj.,1983 (11372)  Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
1/4" x 10' DiAcro, hydraulic, 30"back gauge, square arm, extra blades, arm supports, #8798  Show photo of item Show item detail Request quote from Seller
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
1/4" x 10' Durma #AHGM3006/621103120, power shear, NC control ENC-100  Request quote from Seller
Raymond Robert Ltd, Saint-Hubert, PQ 450-676-2328 (Fax 450-676-0764) Gilles Tremblay
1/4" x 10' Haco #HSC306, shear, 36"motorized back gauge, ser. #60136  Request quote from Seller
Raymond Robert Ltd, Saint-Hubert, PQ 450-676-2328 (Fax 450-676-0764) Gilles Tremblay
1/4" x 10' HTC #250-10A, 36"FOPBG, 4'squaring arm, 25 HP, 1975, #5861  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
1/4" x 10' HTC #250-10A, hydraulic power shear,FOPBG,overload protection  Show photo of item Show item detail Request quote from Seller
Scott Machinery, McClellan, CA 916-638-7718 (Fax 916-638-2450) Deanna Payne
1/4" x 10' HTC #250-10A, hyd.shear,36"FOPBG,extra blades,foot switch,#23282  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 10' HTC #250-10A, shear, 36"FOPBG, squaring arm, 25 HP, 1971  Show photo of item Show item detail Request quote from Seller
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch
1/4" x 10' Johnson #A210, power shear, hydraulic, 24"BG, older, tag #14891  Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
1/4" x 10' Krras #RAS306, hyd.shear,39"FOPBG,17 hld,11/17 spm,10 HP,nice  Show photo of item Show item detail Request quote from Seller
Red Star Machinery Sales & Au, Barling, AR 479-996-0118 (Fax 479-996-0100) David Lee
1/4" x 10' Krras,hyd.shear,guillotine style,FOPBG,sq.arm,new in stock,lowest prices  Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
1/4" x 10' Lodge & Shipley, power shear,18"gap,36"POBG,squaring arms,1969  Show photo of item Request quote from Seller
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess
1/4" x 10' LVD #JS-C25/10, hyd.shear,40"BG,59"L-hand sq.arm,1997,#15629  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/4" x 10' LVD #JS-C25/10, hyd.shear,FOPBG,power rake adj.,power stroke length adj.,miter cutting attach.,1999,#9812  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' LVD, hydraulic shear, CNC 40"BG, square arm, S-arm, 1994  Show photo of item Show item detail Request quote from Seller
Centra Corporation, Baltimore, MD 410-945-0040 (Fax 410-945-0074) Ed/Mike/Thomas
1/4" x 10'6" Masteel #MSH-10250, hyd.swing beam shear,15 HP,5-13/16"throat,'06  Show photo of item Show item detail Request quote from Seller
Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Fax 631-467-8249) Ron Shuster
1/4" x 10' Niagara #1F-10-1/4, hydraulic, FOPBG, squaring arm, 1984 (8653)  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Niagara #810, FOPBG, squaring arm, front supports, clean, 1977 [21147]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 10' Niagara #810, mech.shear, 36"FOPBG, 84"RH sq.arm, 1977 (8421)  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 10' Niagara #IF-10-1/4, hydraulic shear,36"FOPBG,squaring arm,supports,clean,1984 [21740]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 10' Niagara #IF10-1/4, hydraulic, 36"FOPBG, squaring arm, 1984  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
1/4" x 10' Niagara #SS-10-1/4, programmable digital FOPBG, 1986, #9581  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Pacific #250S10ARL, hydraulic, 36"back gauge, hold downs  Request quote from Seller
D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
1/4" x 10' Pacific #FS200-10II, power shear,FOPBG,10'sq.arm,power rake adj,20 HP,#7205  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Pacific /Tri-Acro #T3060, hydraulic shear, 39"FOPBG, priced to sell, 1985, #10902  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
1/4" x 10' Pearson #1014TX, power shear, 4"gap, 30"FOPBG, spare blades  Request quote from Seller
Bradley Machinery & Valuation, Houston, TX 713-302-7087 (Fax 713-465-9522) Skip Bradley
1/4" x 10' Piranha #1/4-10, hydraulic power shear (3073)  Show photo of item Show item detail Request quote from Seller
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner
1/4" x 10' Piranha, hydraulic, 48" back gauge, 2001, 489 hrs.
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 10' Promecam #GH630A, hydraulic shear,FOPBG w/indicator,squaring arm,pwr rake & stroke,auto lube system,#A1107  Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' RAS Powercut, hyd.,swing beam style,30-64 SPM,1.2°blade angle,'05,#07329  Show photo of item Show item detail Request quote from Seller
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
1/4" x 10' Sagita #S250, shear, FOPBG, 2 arm supports, 6' squaring arm  Request quote from Seller
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.
1/4" x 10' SMT-Pullmax, hyd, 32" FOPBG,3' squaring arm,support arms,#23477  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 10' Steelweld #310, shear,48"manual back gauge,gap adj,cheap,1950's  Show photo of item Show item detail Request quote from Seller
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
1/4" x 10' U.S. Industrial #US1025, hydraulic shear, new, in stock, #087842  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
1/4" x 10' U.S. Industrial, hydraulic shear, FOPBG, unbelievable price, new  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
1/4" x 10' Wysong #1025, power shear,FOBG,squaring arm,auto.lube,front support,15 HP,Ser.#P32-398,#7892  Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 10' Wysong #1025, mech., 36"BG, PC100 programmable control, 1989 [21902]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 10' Wysong #1025, mechaincal, 36"FOPBG, front arms, 1975  Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
1/4" x 10' Wysong #1025, shear,36"FOPBG,7'sq.arm,2 stock support arms,#22951  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 10' Wysong #1025, shear,36"FOPBG,9'sq.arm,55 SPM,15 HP,#23206  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 10' Wysong #1025, shear, DRO back gauge, L & R sq.arms, 1978  Show photo of item Show item detail Request quote from Seller
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell
1/4" x 10' Wysong #1025, mech,36"BG,10'sq.arm,rear conv/stacker,1983,#17709  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/4" x 10' Wysong #1025, mechanical, 36" CNC BG,sq.arm,conveyor/stacker,1983  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
1/4" x 10' Wysong #1025, 144" bl, 55 SPM, 15 HP, 1989, stock #12581T  Show photo of item Show item detail Request quote from Seller
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
1/4" x 10' Wysong #1025, PC100 computerized LED gauging system, 1990  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
1/4" x 10' Wysong #1025, CNC pwr squaring shear, 7'side squaring arm, 1981  Show photo of item Show item detail Request quote from Seller
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck
1/4" x 10' Wysong & Miles #1025, shear, power back gauge, 1982, #s27181  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 10' Wysong #1025B, shear, 36"programable power back gauge, 1981  Show photo of item Request quote from Seller
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Fax 305-638-3524) Sales
1/4" x 10' Wysong #H2510, hydraulic shear,PC-100 CNC BG,8'sq.arm,2000,stock #10748  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
1/4" x 10' Wysong & Miles #H2510, 10 ga.stainless,36"FOPBG,(2)front supports,#015211S  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
1/4" x 10' Wysong & Miles #H2510, PC100 back gauge,6'sq.arm,20 HP,1996,#s27442  Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 10' american-hercules, hyd., 36" fopbg, sq arm, low price, #10959  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
1/4" x 12' Accurshear #625012, hydraulic shear, 36"back gauge, 1995
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 12' Accurshear #625012, hyd., 48" FOPBG, SC2 control, sq.arm, 1996, #10948  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
1/4" x 12' Atlantic,hyd,39"FOPBG w/readout,7'sq.arm,29"supp arms,ball trans,'86  Show photo of item Show item detail Request quote from Seller
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
1/4" x 12' Cincinnati #1812, shear,POBG,10'sq.arm,x-blades,ser.#19714  Request quote from Seller
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) William Fahey,Jr.
1/4" x 12' Cincinnati #1812, FOPBG w/indicator,squaring arm,front supports,dual counter balance,auto lube,#A1103  Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 12' Cincinnati #1812, 48"FOPBG, mounted on 6"blocks, older, clean [21867]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 12' Cincinnati #1812, shear,36"FOPBG,9'sq.arm,60 SPM,10 HP,#22564  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 12' Cincinnati #1812, power shear, 36"FOPBG, 12'3"BH, 5/16 rake, 60 spm, 10 HP (25216)  Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord
1/4" x 12' Cincinnati #1812, shear,36"FOPBG,vertical ram adj.,60 spm,#23563  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 12' Cincinnati #1812, mech.,36"FOPBG,10'sq.am,front support,60 SPM  Show photo of item Show item detail Request quote from Seller
Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Fax 631-467-8249) Ron Shuster
1/4" x 12' Cincinnati #1812, mechanical, 36" FOPBG, squaring arm, 1966  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
1/4" x 12' Cincinnati #1812G, 36" power back gauge, 1988  Show photo of item Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 12' Cincinnati #250HS, hyd.shear, programmable back gauge,1985,#s27725  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 12' Cincinnati #250HS, digital microcomputer programmable FOPBG,squaring arm,front supports,1995,#A1067  Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 12' Cincinnati #250HS12, hydraulic,sq.arm,Micro Gage BG ctrl,1997 (8798)  Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/4" x 12' Cincinnati #2CC12, shear,36"BG,60 spm,man./auto cycles,1980,#08332  Show photo of item Show item detail Request quote from Seller
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
1/4" x 12' Cincinnati #2CC12, mechanical,50 SPM,18"gap,36"back gauge,10 HP,good condition,1978  Request quote from Seller
N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels
1/4" x 12' Cincinnati #2CC12, multi-axis CNC front & rear gauging,1991,#s28002  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 12' Cincinnati #2CL12, hydraulic, Ser.37130, Stk. 54220  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/4" x 12' Cincinnati, power squaring shear  Show photo of item Show item detail Request quote from Seller
Galaxie Corporation, Wayne, MI 734-727-0600 (Fax 734-727-0601) Sales Dept.
1/4" x 12' Cincinnati, 36" FOPBG, 60 SPM, rewired, 1974, in stock  Show photo of item Show item detail Request quote from Seller
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
1/4" X 12' Edwards, hydraulic, FOPBG, 1980's  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
1/4" x 12' HTC, hyd,36"FOPBG,(2) sheet support arms,4'sq arm,25 HP,adj.str.lgth,'74  Show photo of item Show item detail Request quote from Seller
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
1/4" x 12' Lodge & Shipley #0412SL, mech.power shear,FOPBG,hyd.hodldowns,lube  Show photo of item Show item detail Request quote from Seller
Scott Machinery, McClellan, CA 916-638-7718 (Fax 916-638-2450) Deanna Payne
1/4" x 12' Niagara #812, power shear,10'sq.arm,48"POBG,digital,ext.arms,1970  Show photo of item Show item detail Request quote from Seller
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess
1/4" x 12' Niagara #812, 36"FOPBG, 50 SPM, hyd. shear, 1982, In Stock  Show photo of item Show item detail Request quote from Seller
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
1/4" x 12' Niagara #IF12-1/4, hydraulic shear,36"power back gauge,squaring arm,15 HP,1982,#18665  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/4" x 12' Niagara #IF12-1/4II, hydraulic shear,prog.digital FOPBG,power quick blade adj,squaring arm,1990,#9538  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 12' Pacific #250B12, hyd.shear, 48"power back gauge, 1978, #s27298  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/4" x 12' Pearson, hydraulic shear,36"FOPBG,10'sq.arm,3 front sheet supports  Show photo of item Show item detail Request quote from Seller
Pearl Equipment Co, Nashville, TN 615-383-8703 (Fax 615-297-3463) Si Culp
1/4" x 12' Spiertz, hydraulic shear, swing beam, FOBG, 39 spm  Show photo of item Request quote from Seller
Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield
1/4" x 12' Wysong #12250, 10'sq.arm,36"FOPBG,2 FAS,PC100 gauging sys,1990,#5693  Show photo of item Show item detail Request quote from Seller
A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.
1/4" x 12' Wysong #1225, mechanical shear,18-power hold downs,double end frame des,extra blades,1976  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord
1/4" x 12' Wysong #1225, mechanical shear, 48"FOPBG, squaring arm, front supports, 1984 [21602]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/4" x 12' Wysong #1225, shear, 36"FOPBG, 9'squaring arm, 55 spm, 15 HP, #24042  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 12' Wysong, 36"FOPBG, 9'squaring arm, (2) stock support arms, #24113  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/4" x 12' Wysong #H2512, hyd.shear,PC-100 cnc front & BG,Met-Fab sht.stacker,'96  Show photo of item Show item detail Request quote from Seller
Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith
1/4" x 12' Ermak / Preci-Cut, hyd.,36"FOPBG,sq.arm,blade gap,15 HP,2003,#7331  Show photo of item Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
1/4" x 13' Adira #1325, hyd.,FOPBG,Adiramatic 2087 ctrl w/LED readout,2002,#1918  Request quote from Seller
Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Fax 631-467-8249) Ron Shuster
1/4" x 13' Adira #GHS-0640, hydraulic power shear,digital FOPBG,squaring arm,power rake & length of cut ctrl,1999,#A1102  Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 13' Amada #H4065, Hyd.Pwr.Shear,FOPBG,in/mm,sq.arm,supports,rake/blade Clearance ctrl, '84,#9526  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 13' Amada #H4065, Hyd.Pwr.Shear,FOPBG,in/mm,sq.arm,supports,rake/blade Clearance ctrl, '84,#9526  Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/4" x 13' Cincinnati #2513, power shear, 18"throat, 48"FOPBG, sq.arm, 1962  Show photo of item Show item detail Request quote from Seller
A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.
1/4" x 13' Heller #HSC640, hydraulic shear, 36"FOPBG, 12"throat, 1990  Show photo of item Request quote from Seller
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Fax 305-638-3524) Sales
1/4" x 13' LVD #13-OH-25, hydraulic shear, under power, 1984  Show photo of item Request quote from Seller
Campbell Industrial Sales, Houston, TX 800-255-4303 (Fax 713-681-0917) T. Campbell
1/4" x 13' Strippit LVD #JS-C25/13, power shear, CNC control, 2000
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/4" x 13' U.S. Industrial, hydraulic shear,FOPBG,unbelievable price,new  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
1/4" x 14' Pacific #250R-14, hydraulic shear,36"power back gauge,squaring arm,20 HP,18"gap,1976,#15096  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/4" x 14' Pacific #250R14, hydraulic shear, 48"back gauge, 3/8"max.rake angle, nice  Show photo of item Show item detail Request quote from Seller
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
1/4" x 14' Pacific #250R14, hyd.,3/8"x14'max.cap,14'3"BH,18"thrt,48"BG,20 HP,'68  Show photo of item Request quote from Seller
HCI Machines, Venetia, PA 724-942-3382 (Fax 724-942-5194) Terry Blackman
1/4" x 16' Steelweld, PFOBG, mechancial shear, motorized back gauge, good  Show photo of item Request quote from Seller
Soudogaz Inc, Chicoutimi, PQ 418-889-2002 (Fax 418-889-2012) Jocelyn Nadeau
1/4" x 18' Niagara #1018, mechanical squaring shear  Show photo of item Show item detail Request quote from Seller
Mauldin Machine Inc, North Little Rock, AR 501-835-5494 (Fax 501-835-5499) Jerry Mauldin
3/8" x 4' Lodge & Shipley #0604L, shear,24"BG,air clutch,foot switch,#23190  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
3/8" x 6' Cincinnati #2506R, power back gauge, 10 HP, squaring arm, 1963  Request quote from Seller
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston
3/8" x 6' Cincinnati #2506R, mechaincal,36"FOPBG,PLC gage ctrl,squaring arm,1968  Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
3/8" x 6' Cincinnati #2506R, FOPBG w/ind.,sq.arm,supports,dual counter balance,#9719  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/8" x 6' Cincinnati, 48" power back gauge, sq.arm, late  Request quote from Seller
Machinery In Motion, Rockford, IL 815-961-9600 (Fax 815-961-0966) Eric Kornacker
3/8" x 6' Donewell #3/8-6, hydraulic power shear,FOPBG w/ind.,pwr.length of stroke adj.,pwr.rake adj.,front supports,#9861  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/8" x 6' Niagara #18-6-3/8, mech.shear,over driven,18"gap,36"FOPBG,sq.arm,1967  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
3/8" x 6' Pacific #375S6ARL, shear,pwr back gauge,ball tbl,18"thrt,exc.,#104035  Show photo of item Show item detail Request quote from Seller
National Machinery Exchange, Newark, NJ 973-344-6100 (Fax 973-589-0944) Robert Pinelli
3/8" x 6' Wysong #638, power shear,36"FOPBG,56"sq.arm,50 SPM,foot switch,#22941  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
3/8" x 8' Cincinnati #2508, mechanical power squaring shear,power back gauge  Show photo of item Show item detail Request quote from Seller
Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner
3/8" x 96" Cincinnati, mechanical shear,19"gap,manual BG needs repair,1943  Show photo of item Show item detail Request quote from Seller
Centra Corporation, Baltimore, MD 410-945-0040 (Fax 410-945-0074) Ed/Mike/Thomas
3/8" x 8' Pacific #375R8, hydraulic shear, 18"throat, 25 HP, #13173  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
3/8" x 8' Pacific #375S8, hyd.,ROPBG,18"gap,6'sq.arm,2 sht.supports,flush flr mnt  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3/8" x 8' Wysong #838, mech.shear,36"FOPBG,squaring arm,front arms,1965  Show photo of item Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
3/8" x 10' Accurshear #837510, hydraulic power shear,prog.digital FOPBG,supports,blade clearance adj.,1995,#9860  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/8" x 10' Atlantic, hyd.,SP8 ctrl,43"sq.arm,39"back gauge,blade gap,in stock,2009  Show photo of item Show item detail Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
3/8" x 10' Cincinnati #2510, ROBG,sq.arm,front supports,flush floor mount  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3/8" x 10' Cincinnati #2510, FOMBG, squaring arm & supports, 1953  Show photo of item Show item detail Request quote from Seller
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Fax 973-992-8334) Michael/ Dave
3/8" x 10' Cincinnati #3750,CNC hyd.shear, front & rear gauging,10' pwr.squaring  Show photo of item Show item detail Request quote from Seller
Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer
3/8" x 10' HTC #375-10A, hyd, 33 spm, 36" pbg, 15 hp, .500 in/ft rake tpf (25347)  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord
3/8" x 120" HTC Pacific #375-10A, hydraulic shear, 48"FOPBG, conveyor, 1982  Show photo of item Show item detail Request quote from Seller
Centra Corporation, Baltimore, MD 410-945-0040 (Fax 410-945-0074) Ed/Mike/Thomas
3/8" x 10' Niagara #EF10-3/8, Hydraulic, Ser. 64405, Stock #54844  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/8" x 10' Niagara, shear,50 spm,36"FOPBG,8'sq.arm,sgl.or continuous stroke (#8549)  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/8" x 10' U.S. Industrial, hyd.shear, FOPBG, unbelievable price, new  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
3/8" x 12' Accurshear, power gap, 10' lh sq. arm, stll table, 3 frt supts, exclnt,, 1993  Show photo of item Show item detail Request quote from Seller
HPI Machinery Sales, Hartland, WI 262-538-1147 (Fax 262-538-1327) Dan Huck
3/8" x 12' Atlantic #HDS, power shear, 39"FOPBG, squaring arm, 25 HP, 1998, stock #10749  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
3/8" x 12' Atlantic, hyd.,SP8 ctrl,43"sq.arm,39"back gauge,blade gap,in stock,2009  Show photo of item Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
3/8" x 12' Cincinnati #2512, shear,50 spm,36"ROMBG,20 HP,18"gap,stock #15590  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/8" x 12' Cincinnati #2512, mech.,12'3"BH,auto shear,36"FOPBG,12"sq.arm,1975  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
3/8" x 12' Cincinnati #2512, mechanical shear,36"FOPBG,12'sq.arm,50 spm,1974,#18218  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/8" x 12' Cincinnati #2512, mechanical,3/8"thickness,15 HP,1955,#14459  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
3/8" x 12' Cincinnati #2512G, mechanical,48"FOPBG,squaring arm,front arms,1980  Request quote from Seller
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul
3/8" x 12' Cincinnati #375-12, hydraulic shear, 36"power back gauge, 1983
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
3/8" x 12' Cincinnati #FSU, fast setup, front & rear ga, Cinconveyor,1980,in stock  Show photo of item Show item detail Request quote from Seller
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
3/8" x 12' Cincinnati, 48" power back gauge,sq.arm,updated Cinc CNC back gauge  Request quote from Seller
Machinery In Motion, Rockford, IL 815-961-9600 (Fax 815-961-0966) Eric Kornacker
3/8" x 12' HTC #375-12, hydraulic shear, in plant, #s26975  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3/8" x 12' HTC #375-12AS, hydraulic, PBG, 3'squaring arm, motorized rake  Show photo of item Request quote from Seller
Sierra Victor Industries, Port Orange, FL 386-304-3720 (Fax 386-304-3722) Sam Valenzisi
3/8" x 12' Lodge & Shipley, mech.shear,18"gap,sq.arm & back gauge,1972,#03380C  Show photo of item Show item detail Request quote from Seller
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
3/8" x 12' Steelweld #6C12, mechanical shear, 36"FOPBG, 2 sa, 1964  Show photo of item Request quote from Seller
Industrial Plant Equipment, Northbrook, IL 847-998-8882 (Fax 847-998-8883) Jerry Kolb
3/8" x 13' U.S. Industrial, hydraulic shear,FOPBG,unbelievable price,new  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
3/8" x 14' HTC #375-14SR, no back gauge,Vickers hyd.,saftety foot pedal,s/n#169403  Show photo of item Show item detail Request quote from Seller
Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith
3/8" x 16' HTC, power shear, 36"FOPBG, square arm, #18894  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/8" x 16' Hydrapower #SH3016, shear,48"BG,quick set blade gap,2005,#06180  Show photo of item Show item detail Request quote from Seller
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
3/8" x 16' Pacific #375R,FOPBG,pwr.rack angle adj,16'sq.arm,2-fr.support arms,#4260  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/8" x 20' Pacific #375R20, shear,48"power back gauge,20'squaring arm,conveyor  Show photo of item Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
3/8" x 20' Pacific #375R20, hydraulic shear,48"back gauge,30 HP,20'conveyor,1979  Show photo of item Show item detail Request quote from Seller
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan
3/8" x 24' Cincinnati #3SE-24, hydraulic power squaring shear, stock #53976  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/8" x 24' Pacific #300g24, hydraulic shear,48"FOPBG w/Swing Away feature,1988  Show photo of item Show item detail Request quote from Seller
Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney
1/2" x 4" WA Whitney #606-052, Hyd. Shear,18 Ton, Push ButTon, Control, #5990  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/2" x 6" WA Whitney #664-000, Hyd. Shear, 50 Ton, #5989  Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/2" x 12" Cincinnati #500HSX12, hyd, 48"prog.. B.G., 12'sq.arm, 40 HP, 1995  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
1/2" x 2' Scotchman #610, hydraulic, 12" x 1"cap., back gauge, 10 HP, new, in stock  Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/2" x 4' Henry #4800, Hydraulic Power Shear,Rear Operated Hand Back Gauge, Electric Foot Pedal #9845  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/2" x 4' Metal Muncher Shear, back gauge, 220 V., 3 ph., Stock #4278  Show photo of item Show item detail Request quote from Seller
Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson
1/2" x 6' Lodge & Shipley #0806, 15 HP, air clutch, auto lube, 1978, stock #53038  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/2" x 6' Lodge & Shipley #0806L, to 40 SPM, 15 HP, 18"throat depth, #14085  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
1/2" x 6' Lodge & Shipley #08906L, power squaring shear, stock #53575  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/2" x 6' Wysong & Miles #650, 3/8"SS cap, 10 hold downs, painted/tested, #015320  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
1/2" x 8' Delta CTL Shear Hydro mechanical, 1994  Request quote from Seller
Michiana Distributing Co Inc, Elkhart, IN 574-206-9307 (Fax 574-206-9095) John Brown
1/2" x 8' Wysong #825 Shear, Ref. #63376  Show item detail Request quote from Seller
TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto
1/2" x 10' Accurshear #850010, FOPBG, LH, sq.arm, New 1996, Tag #15055  Show photo of item Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
1/2" x 10' Accurshear #850010, FOPBG, 8'squaring arm, 1985, #8002  Show photo of item Show item detail Request quote from Seller
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Fax 845-398-0074) Jordan Craig
1/2" x 10' Amada #ESH3013, hyd., 40" CNC BG, 10' sq.arm, 2001, #18838  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 10' Amada #H3013, 12-40 SPM, 36" FOPBG, sq. arm, extra knives, 1980  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1/2" x 10' Amada #H3013, hydraulic, 12-45 SPM, 40" FOPBG, Shadow, 1986  Show photo of item Show item detail Request quote from Seller
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
1/2" x 10' American Hercules, hydraulic, flush floor, 36"FOPBG, 30 HP [19891]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/2" x 10' Atlantic, hyd.,SP8 ctrl,43"sq.arm,39"back gauge,blade gap,(5) in stock  Show photo of item Show item detail Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
1/2" x 10' Cincinnati, CNC, hyd, 48"swing-up BG, shear controls, stock #1318  Show photo of item Show item detail Request quote from Seller
Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark
1/2" x 10' Cincinnati #500HS10, CNC shear ctrl., 48"swing-up BG, CNC ft. gua. 1998, #17184  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 10' Clearing Niagara #IF-10 1/2-2, hydraulic, 1993 (8584)  Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/2" x 10' Clearing Niagara #IF10 1/2IIi, hydraulic, floor, 36"FOPBG, 1993 [21513]  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
1/2" x 10' Dreis & Krump #OHS0170, hydraulic,FOBG,adj.rake/blade gap,#8154  Show photo of item Show item detail Request quote from Seller
Wisconsin Metalworking Mchy, Waukesha, WI 262-548-6080 (Fax 262-548-6094) J.R. Kraemer
1/2" x 10' Dreis & Krump #OHS-10500, hydraulic,36"pwr back gauge,sq.arm,20 HP,1973  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
1/2" x 10' Elk River #150SB10, comb.shear/brake,hyd.hold downs,3'sq.arm,'76,#087833S  Show photo of item Show item detail Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
1/2" x 10' Heller #HSC1330, hydraulic, 36" FOPBG, excellent condition  Show photo of item Request quote from Seller
Sierra Equipment Co. Inc., San Francisco, CA 415-826-1200 (Fax 415-826-1201) Dave Weiss
1/2" x 10' Hercules, hyd.,front operated back gauge,floor stand,1978,#7664  Show photo of item Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1/2" x 10' HTC #500-10A, hydraulic, FOPBG, front plate support, 40 HP, #9691  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/2" x 10' Krras #RAS3013, hydraulic shear, new in stock  Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
1/2" x 10' Krras, 48"digital back gauge,quick change blade gap,guillotine,new  Show photo of item Show item detail Request quote from Seller
Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson
1/2" x 10' Niagara, Hyd., 38" FOPBG, 5' squaring arm, rake & stroke control, #24045  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/2" x 10' Niagara #IF10-1/2-II, hydraulic, Ser.S65903, #54189  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/2" x 10' Pacific Hydraulic Plate Shear, 31 Ton Holddown Pressure, #1393  Show photo of item Show item detail Request quote from Seller
Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark
1/2" x 10' Pacific #375R10, power shear, hydraulic, 36"back ga., squaring arm, 1980  Show photo of item Request quote from Seller
Metal Fab Machinery Inc, Cold Spring, MN 320-685-8819 (Fax 866-206-1974) Curt Olafson
1/2" x 10' Strippit LVD #JS-C50/10, power shear, CNC control, 1998
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/2" x 12' Accurshear #850012, CNC front & rear gauging, conveyor stacker system, 2002, #18162  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 12' Accurshear #850012, hydraulic, power back gauge, 12' squaring arm, 1995  Request quote from Seller
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston
1/2" x 12' Accurshear, hydraulic, 36"back gauge, 2000
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
1/2" x 12' American Hercules, hydraulic, 2 speed 36"FOPBG with readout  Show photo of item Show item detail Request quote from Seller
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Fax501-897-4090) Teresa Glover
1/2" x 144" Atlantic, 18 spm, 48"back gauge, 220/440 V., 3 ph., stock #4190  Show photo of item Show item detail Request quote from Seller
Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson
1/2" x 12' Atlantic, hyd.,SP8 ctrl,43"sq.arm,39"back gauge,blade gap,in stock,2009  Show photo of item Request quote from Seller
Industrial Machinery, Columbus, OH 614-464-4376 (Fax 614-464-0129) Jake/Jim/Bill
1/2" x 12' Betenbender #12-500, SA,36"FOPBG,20 HP,3 pos.gap adj.,2001,#5905  Show photo of item Show item detail Request quote from Seller
A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.
1/2" x 12' Cincinnati #4312, 38"FOPBG, 10'squaring arm, 40 spm, 20 HP, #23721  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1/2" x 12' Cincinnati #500HSX12, hyd,CNC,48"BG,flush floor,2000,#S27316  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/2" x 12' HTC #500-12A HC, 36"power back gauge,40 HP,sq.arm,support arms,1986,#19126  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 12' HTC #50012AHC, will cut 3/4"max rake,48"FOPBG,pow blade clearance,'79  Show photo of item Show item detail Request quote from Seller
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
1/2" x 12' HTC #500-12AG, 24"gap, 48"FOPBG, 8 SPM, 40 HP, 1973, #50691  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1/2" x 144" Lodge & Shipley shear, FOPBG, 230/460 V., 3 ph., stock #4215  Show photo of item Show item detail Request quote from Seller
Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson
1/2" x 12' LVD #12-05-50, hydraulic shear,1/2"cap,144"cut.length,#13850  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
1/2" x 12' Niagara #1012, Square Arm, 1970  Show item detail Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
1/2" x 12' Niagara #1012, ROMBG,fr.sup,3-mech.foot pedals,25HP,s/n #51241,#7092  Show photo of item Show item detail  Show Video of Item Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
1/2" x 12' Niagara #1012, 3/8" S.S. cap., 25 holddowns, #108552  Show photo of item Show item detail Request quote from Seller
National Machinery Exchange, Newark, NJ 973-344-6100 (Fax 973-589-0944) Robert Pinelli
1/2" x 12' Pacific #400G-12, 1989, #S27462  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/2" x 12' Pacific #500R-12, Hydraulic Shear, FOBG, adj.rake, nice  Show photo of item Request quote from Seller
Barnett Machine Tools Inc, Mount Carmel, IL 618-375-7240 (Fax 618-375-7244) Phil Barnett
1/2" x 12' Pullmax #GSA-640, 72"rear/96"front CNC gauge,Cybelec DNC70,1998  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1/2" x 12' Pullmax #GSA-640, Cybelec DNC 70 CNC,72"BG,96"FG,14'squaring arm,1998,#15679  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 12' Standard #AS500-12, hyd, 36" ba.ga.,8' squaring arm,40HP,1997, #18933  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 12' Standard, 48"back gauge, 2008  Request quote from Seller
Northern Machine Tool Co, Cleveland, OH 216-961-0444 (Fax 216-961-0443) Robert Kosman
1/2" x 12' Wysong #1250, mechanical, power back gauge, squaring arm, 1999  Request quote from Seller
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston
1/2" x 12' Wysong #1250, mech., 48" FOPBG,read out, 12' sq.arm, 20 HP, 40 SPM, 2001  Show photo of item Request quote from Seller
Metalfab Inc, Indianapolis, IN 317-733-0268 (Fax 317-733-0283) Karl Vanderbur
1/2" x 12' Wysong & Miles, mechanical,flush floor,48"FOPBG,squaring arm,1973  Show item detail Request quote from Seller
Machinery In Motion, Rockford, IL 815-961-9600 (Fax 815-961-0966) Eric Kornacker
1/2" x 12' Wysong, mechanical, 48" FOPBG, 12' sq.arm,1996, Runs like New  Request quote from Seller
Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Fax 513-575-3997) Chris Wilson
1/2" x 12' Wysong, mechanical shear, 48"FOPBG with readout, 1979  Show photo of item Show item detail Request quote from Seller
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Fax501-897-4090) Teresa Glover
1/2" x 16' Pacific #500R16, 48"FOPBG, squaring arm, nice condition, 1968 [#29]  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1/2" x 20' Accurshear #850020, hyd.,36"pwr.back gauge,sq.arm,flush flr,40 HP,1983  Show photo of item Show item detail  Show Video of Item Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
1/2" x 20' Accurshear, hydraulic power squaring shear, FOPBG's new 1983  Show photo of item Show item detail Request quote from Seller
Blackhawk Machinery Corp, Highland Park, IL 888-926-0050 (Fax866-248-8057) C. Perrelli
1/2" x 20' Cincinnati #4FL20, hyd., 48"pwr back gauge, 15'squaring arm, 1973, #18012  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1/2" x 20' Cincinnati #4FL20, hyd.,20'3"BH,36"FOPBG,sq.arm,ball transfers,1974  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1/2" x 20' Pacific #500R20, hydraulic,18"throat,12'squaring arm,48"FOPBG,#12863  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
1/2" x 35' Pacific #500R35 Shear Ref. #62968  Show item detail Request quote from Seller
TDI Group LLC, Pittsburgh, PA 412-826-4950 (Fax 412-826-4959) D. DiBenedetto
5/8" x 12' Cincinnati #5F112, hydraulic squaring shear,power back gauge,1968  Request quote from Seller
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Fax 262-878-9494) Neal Kruszka
5/8" x 12' Cincinnati #5FL12, hydraulic power squaring shear, stock #53630  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
5/8" x 12' Cincinnati #5FL12, hydraulic squaring shear  Show photo of item Show item detail Request quote from Seller
R.P. Machine Enterprises Inc, Statesville, NC 704-872-8888 (Fax 704-872-5777) R. Piselli
5/8" x 12' Cincinnati #5FL12, 48" power b.g., elec. foot switch, 10' sq. arm, '72, #18977  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
5/8" x 12' HTC #625-12SR, hydraulic shear, 36"FOPBG, 1972  Show photo of item Request quote from Seller
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Fax 305-638-3524) Sales
5/8" x 12' Pacific #625S12, hydraulic shear, 36"FOPBG, our stock #10678  Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
5/8" x 14' Niagara, 36"FOPBG, 36 SPM, power material feed, squaring arm, #9580  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
5/8" x 20' Cincinnati #5FL20, hyd., 60"power back gauge, 10'squaring arm, 1973, #15690  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/4" x 10' Bertsch Series 1000, Hydraulic, 36" Power Back Gauge, 1983, #19065  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/4" x 10' Betenbender, hydraulic, blade gap adj., 87 hours, 2008
Weaver Sheet Metal Inc, Ephrata, PA 717-733-4763 (Fax 717-738-3601) Daniel/David
3/4" x 10' Cincinnati #6S10, Microcomputer gage control, 48"back gague, 1981, #17429  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/4" x 10' Cincinnati #6SE10, hydraulic squaring, Ser.52113, Stk.#54223  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/4" x 10' HTC #750-10SRHC, hydraulic,FOPBG w/indicator,squaring arm,rebuilt 1998,#9705  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
3/4" x 10' Pacific #750HD, back gauge  Request quote from Seller
Northern Machine Tool Co, Cleveland, OH 216-961-0444 (Fax 216-961-0443) Robert Kosman
3/4" x 12' Cincinnati #6212, mechanical, 30 SPM, 18"throat, #12862  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
3/4" x 12' Cincinnati #6212, mech,48"PBG w/DRO,12'3"BYH,1.06"ram adj,30SPM,30 HP,10'sq.arm  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord
3/4" x 12' Cincinnati #6G12, hyd., 12' sq arm power back gauge, #10963  Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
3/4" x 12' Cincinnati #6SE12, 48"FOBG, 50 HP  Show photo of item Show item detail Request quote from Seller
Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.
3/4" x 12' Cincinnati, mechanical,30 SPM,18"throat,30 HP,48"back gauge,1-1/16"ram adj,1964  Request quote from Seller
N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels
3/4" x 12' HTC #750-12SR HC, 36"power back gauge,10'squaring arm,1976,#s27320  Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3/4" x 12' Master Fab #CS750-12,hyd,1/8-3/4"bld.adj,FOPBG,9"gap,75hp,flush flr mtd  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3/4" x 12' Pacific #500R-12, Hydraulic Shear, FOBG, adj rake, nice  Show photo of item Show item detail Request quote from Seller
Barnett Machine Tools Inc, Mount Carmel, IL 618-375-7240 (Fax 618-375-7244) Phil Barnett
3/4" x 12' Verson, hydraulic, 36"FOPBG, 12'squaring arm, front arms, 50 HP  Show photo of item Show item detail Request quote from Seller
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
3/4" x 16' Pacific #500R16, hydraulic, 48"power back gauge, 1967, #S19335  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3/4" x 20' Accushear #875020, 48"back gauge, squaring arm, 1990, #18045  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/4" x 20' Cincinnati #6SE20, 60"back gauge, squaring arm, 1991, #17883  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
3/4" x 20' Steelweld #12FH-20, 20'6"actual, 24"gap, 4'FOPBG, squaring arm  Show photo of item Request quote from Seller
Bradley Machinery & Valuation, Houston, TX 713-302-7087 (Fax 713-465-9522) Skip Bradley
3/4" x 32' Casanova, Hyd., Flush Floor, Gap, Back Gauge  Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve
0.135" x 4' Cincinnati #1004-R, Met-Fab 1/4"capacity sheet stacker  Show photo of item Show item detail Request quote from Seller
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg
1" X 6' Pacific, 1957, In Plant Under Power  Request quote from Seller
Richard Lunt Machinery, Seattle, WA 206-763-1390 (Fax 206-767-9825) Richard Lunt
1" x 8' HTC #1000 8SR, hydraulic shear, 36"FOPBG  Show photo of item Show item detail Request quote from Seller
Pearl Equipment Co, Nashville, TN 615-383-8703 (Fax 615-297-3463) Si Culp
1" x 8' Hydratool Hydraulic Plate Shear, New 1985, Excellent  Show photo of item Request quote from Seller
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Fax 256-536-1322) Ron Hardy
1" x 12' Betenbender, shear  Show item detail Request quote from Seller
Barnett Machine Tools Inc, Mount Carmel, IL 618-375-7240 (Fax 618-375-7244) Phil Barnett
1" x 14' Cincinnati #8SE14, hyd.,48"power back gauge,154"sq.arm,CNC shear control,1991,#17838  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
1" x 14' Cincinnati #8SE14, hydraulic, 48"FOPBG, squaring arm, 1991  Request quote from Seller
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
1" x 14' Cincinnati, hydraulic,10'sq.arm,front supports,50 HP,84000 lbs,1974  Show photo of item Request quote from Seller
Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes
1" x 18' Cincinnati #8NL, Hydraulic Shear, Seq.35923, Stk.#54227  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1-1/4" x 4' Pacific #100ORA, hyd.,adj.rake & clearance,no pit,low hrs,mint  Request quote from Seller
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Fax 520-836-1944) Dan/Nate
1-1/4" x 124" Donpressmash #HA3225, plate shear, 8"blade stroke, auto.table feed  Request quote from Seller
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich
1.77" National Rebar Shear, Air Trip Mech.Clutch,Rear Operated Hand Back Ga.,extra blades,#7924  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes
Amada #M4045, mechanical power squaring shear, 50 spm, 1981  Show photo of item Show item detail Request quote from Seller
Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Back to Machinery & Machine Tool listings.

Photo = photo available    Spec sheet = spec sheet available    Request a quote = request quote from seller    Video Available = video available    Visit Dealer's listings = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
 
  Advanced Search
Surplus Record http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Advertise
Privacy Policy 		Ariba Logo