Browse:  Machinery Electrical
RSS Blog Surplus Record

SAWS, COLD, FRICTION AND CARBIDE

 Westbrook Engr.buy/sell fabricating equipment
There are 143 listings in this category
File update: Mon, Apr 27, 2015 01:22
Advanced Search
Sort by:
Original Sort
2.75" Kasto Wagner #WAM-9 Copper cold saw, 2012 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Scott / Mark
2.75" Wagner #WAC 70, automatic carbide saw, 26' loading table, 2000, #4149 Camera Spec Sheet  Show Video of Item rfq
F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward
2.75" Wagner #WAC 70, automatic carbide saw, 26' loading table, 2000, #4150 Camera Spec Sheet  Show Video of Item rfq
F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward
2-3/4" Wagner #WAC70, fully auto, 11-1/4" carbide blade, 26' loading table, PLC control, 2000 Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
2.75" Wagner Auto #WAS 90R/S, 14 HP, 26' bundle style sys, A-B SLC500 PLC control, #4158 Camera Spec Sheet rfq
F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward
2-3/4" Wagner #WAS90R/S, fully auto, 26' bundle style mag, 11-1/4" carbide bld, AB PLC, '98 Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
3" x .125" FMS #FCO CS-76-3 milling type flying cut-off saw, new Camera rfq
Freedom Machinery Company Inc, Grand Rapids, OH 419-832-0100 (Fax 419-832-6000) Dave/ Gari
3" Scotchman #315RFA/HT, full auto, 315mm bl, 44/88rpm, brush deburr, 24" bndl.ldr,, 60" fd. Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
3-1/2" Scotchman #CPO-315-RFA/HT, fully auto, 315mm bld, 60" feed, 12-82 RPM, readout Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
3-1/2" Trennjaeger #ST-251, cold saw, manual, heavy duty Camera Spec Sheet rfq
Allstate Saws Inc, Aurora, IL 630-892-7297 (Fax 630-892-8560) Bob Hoffmann
3.54" Bewo #CAP60, 24' loading rack, vari-speed, 59" feed length, PLC control, 1995 Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
3.9" Kasto #Disc A7C, 12.4" blade, non-ferrous cold saw, miter, 4 HP, 2004, #9747 Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
3.9" Kasto #V350U, semi auto, ferrous, pneumatic auto clamp and df, 2000, #9524 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
4" IBP/Pedrazolli Perris 350, compound mitre, air clamp, 3400 RPM, new, tag #14365 Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
4" Kasto #GKSU, cold saw, 400mm, upcut type, hydraulic clamp & blade feed, 2003 Camera  Show Video of Item Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
4-1/8" Eisele FOM Panda, semi, 12" blade, 45°miter R&L, TEX 170" length stop, 2HP, 1993 Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
4-1/4" Trennjaeger #LPC110-400, semi-auto cold saw, 15-3/4" maximum blade diameter, 25" x 26" table, hydraulic hold down system, #13102J Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
4.33" Kalamazoo #FA350A, cold saw, auto, ferrous, 14" blade, 5 HP, miter, #9471 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
4.5" x 4.5" Conni #S38ONTS, full auto, 21" BF, 5.18" rd, 13-28 RPM blade speed, 6.5 HP, #23425 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
4-1/2" Dake /MEP Tiger #350 CNC-FE, auto cycle, mitres, 3.5 HP, 1994, #17864 Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
4-1/2" Dake MEP Cobra 350SX, semi-automatic cold saw, #8614 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel
4-1/2" Scotchman #CPO-350NF, (non-ferrous) manual chop, 13-1/2" carbide blade, all dressed up, 1994 rfq
WINN/DIXI Machine Tool Sales, Rockford, IL 815-874-4771 (Fax 815-874-8980) Dick Crosby
4-1/2" x 16" Trennjaeger #LPC110/400, cold saw, powered hydraulic mitering Camera Spec Sheet rfq
Allstate Saws Inc, Aurora, IL 630-892-7297 (Fax 630-892-8560) Bob Hoffmann
4-11/16" Wilton Cobra #350SX, circular cold saw, semi-auto, non ferr, mitre, '98, #4388 Camera Spec Sheet rfq
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey
4-3/4" Haberle #H350H, semi-auto cold saw, 14" diameter blade, air vises, auto down feed, 2000 Camera rfq
Fordoc Inc, Rock Falls, IL 815-285-2660 (Fax 815-285-2660) David H Doctor
4-3/4" Hyd-Mech (MEP) #PNF-350A, non-ferrous, auto feed, 14" blade diameter, miter, PLC, 2006 Camera Visit Dealer's Equipment Listings  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
4-3/4" Kalamazoo #FS350SA, 4-3/4" tube, 2-3/4" solid, 45°angles, extra blades, #26466 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Fax 847-640-0431) Sales Dept.
4.75" KMT #CT350A-NC, auto, non-ferr, NC control, 3600 RPM, 14" blade, mitre, '06, #9605 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
4-3/4" Scotchman semi-auto.cold saw, hi-production, pneumatic clamp sys, power downfeed Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
4-3/4" x 48" Trennjaeger #PMC8/36" -48" for bar grating Camera Spec Sheet rfq
Allstate Saws Inc, Aurora, IL 630-892-7297 (Fax 630-892-8560) Bob Hoffmann
4-3/4" Trennjaeger #VC-320, circular cold saw, 8" x 4" @ 90°, rounds 4-3/4" @ 90° Visit Dealer's Equipment Listings  rfq
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Fax 503-620-1911) Jackie Fahey
4-7/8" Scotchman #CPO VS-350HT-PD, semi-auto.cold saw, 14" blade, 4-7/8" rnd, hvy duty Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
5" Clausing #FA350/A, fully auto, 14" blade, 5 HP, 1700/3400 RPM, rotates 45°left & right Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
5" x .200" FMS, 23" maximum cut-length Camera rfq
Freedom Machinery Company Inc, Grand Rapids, OH 419-832-0100 (Fax 419-832-6000) Dave/ Gari
5" Kaltenbach #KKS400, fully-auto.cold saw, 15-3/4" blade, Fanuc prog.controls w/DRO Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
5" WJ Savage #RS1020, abrasive-blade cut-off, stationary blade guard, 20 HP, #24859 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
5-1/16" Dake #370S, semi-auto, air clamping, non-ferrous, 1500/3000 RPM, mitre, '08, #9537 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
5-1/8" Kaltenbach #KKS-400NA/LM, full auto, miter, length measure, 15-3/4" blade, '99, #9479 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
5-1/8" Kaltenbach #SKL400 DH/T3, Twin Head, Adjustable Base, Non Ferrous, Dust Collector, New'99, Tag#15726 rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
5-1/8" Kaltenbach #SKL400NA, non-ferr, 15-3/4" blade, .4" -80" feed length, miter, '89, #9629 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
5-1/4" Wagner #WKMAN-360, 31/43/59/78 SPM, 14" -20" blade, 1/4" L min.cut, #16542 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
5.5" Kaltenbach #RKT450, cold saw, mitre, semi-auto, 17.75" blade diameter, 1992, #8994 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
5.5" Kaltenbach #RKT450, semi-auto cold saw, 17.75" blade, 90°miter, 4 HP, clnt, good, '92 Camera Spec Sheet rfq
HPI Machinery Sales, Hartland, WI 262-538-1147 (Fax 262-538-1327) Dan Huck
5.5" Kaltenbach, 15-17" blade, in & out feed, miter, 1990 rfq
Madison Machinery Co Inc, Riverhead, NY 631-722-4214 (Fax 631-722-4157) Joe Madison
5.9" FOM Spring 50, 5.1" x 11.8", 20" bld, vert.blade fd/miter 45°LR, 3 HP, horiz.vise, '94 Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
5.9" Kaltenbach #RKT450, Mitre, 400mm Blade, 1992, Tag #15255 rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
6" Eisele #D7277, fully automatic ferrous saw, Tag #15430 Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
6" Kaltenbach #RKT450V, cold saw, upcut type, mitering capability, 1994 Camera  Show Video of Item Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
6" x 24" Trennjaeger #PMC6, cold saw rfq
Allstate Saws Inc, Aurora, IL 630-892-7297 (Fax 630-892-8560) Bob Hoffmann
6.3" Eisele #PSU-450-CNC-2, auto miter, auto sort, 20' bundle mag, CNC control, 59" feed Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
8" x 30" B & O #0830, semi auto, 24" blade, 20 HP, 15' powered infeed, 27' powerd outfeed, '00 Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
8" Kaltenbach #KSV630, 8" rds, 8-spds 30-252 FPM, chip conv, coolant, 1978, #13255 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
8" Metlsaw non-ferrous cut off saw, 8" x 24", 26" blade diameter, touchscreen, #23274 Camera Spec Sheet rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin
9-1/8" Kaltenbach, cold saw, 28" blade diameter, 7.5" square, 9-1/8" round, 1980, #12670 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
9.8" Kaltenbach #HDM-800, 31.4" blades, 9.8" rounds, 19.7" x 6.7" flats, 10 HP Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
9.84" Rohbi #RKA-62-600, circular cold saw, auto.feed, conveyor, Swiss-built, 1.5 HP, s/n #62.136/84, 1984, #153840 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
9.843" Kaltenbach #HDM-800, 31.4" diameter blade, 19.7" x 6.7" flat, 10 HP, 1976, #9373 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
9.843" Kaltenbach #HDM-800, 31.4" diameter blade, 19.7" x 6.7" flat, 10 HP, 1974, #9372 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
9.843" Kaltenbach #HDM-800, 31.4" diameter blade, 19.7" x 6.7" flat, 10 HP, #9187 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
10" Bewo #M/N-250LT Cold Saw Camera rfq
R H Phillips Equipment Leasing Co Inc, Shelby, OH 419-989-3585 Jesse Phillips
10" Delta, chop saw, tag #14478 rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
10" Everett #100025, abrasive chop saw, pneumatic vise, push button start, stand, #A3488 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
10" Kaltenbach #2400-01-005, type KSU630ALL, chip conveyor, 1981 rfq
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Thomas Noone
10" Pedrazzoli cold saw, 10" blade, power clamp, good condition Camera rfq
Downs Machinery Sales Inc, Maumee, OH 419-382-6216 (Fax 419-382-4736) Thomas Downs
10" Scotchman #CPO275HT, non-ferrous, miter, 60/120 RPM, 2005, #27171 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
10" Scotchman #CPO275HTPK, miter, 60/120 RPM, 3-3/8" round tube capacity, coolant, 1997, #28393 Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
12" -14" Imet / Kalamazoo #Record 315/350, 30/60 RPM, ferrous, mitre, 3.5 HP Camera Spec Sheet rfq
Destiny Machinery Inc, Odessa, FL 727-376-2399 (Fax 727-372-8202) Dennis Laliberte
12" Kaltenbach #HDM-900, 36" blade diameter, auto blade feed, 51 & 102 SFPM, 1981, #15926 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
12" OMAV #350-A, Aluminum cutting saw, 12" H x 48" W, 100 HP hydraulic motor, (5) 42" blades Camera rfq
Electro Corp, Kingsbury, IN 219-393-5571 (Fax 219-393-5283) Wes Juszkiewicz
12" Sampson #SC12, chop saw, air head feed, tag #14479 rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
12" Soco #MC275AC, semi-automatic miter cold saw, auto cutting cycle, automatic clamping, #A2748 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
12" Soco #VS-315FA, semi-automatic cold saw, serial #92VSD315-15, #6325 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
12" x 40" Trennjaeger #PMC-12, cold saw Camera Spec Sheet rfq
Allstate Saws Inc, Aurora, IL 630-892-7297 (Fax 630-892-8560) Bob Hoffmann
12" Trennjaeger #PMC-12, semi-auto cold saw, mitering manual, powered head, 1976 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce
12" x 39" Trennjaeger #PMC-12, semi auto, long.cut, 36" bld, 4 cutting speeds, 1976 Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Fax 586-759-3106) Sales Dept.
12.5" Acra #FHC-315AV, auto, 70/35 RPM, 3 HP hydraulic motor, 4 HP saw motor, 220V., #087662S Camera Spec Sheet  Show Video of Item rfq
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
14" Baileigh #CS-350-EU, manual, inverter drive, 24-120 RPM, 45 L/R miter, new, in stock Camera rfq
Sierra Victor Industries, Port Orange, FL 386-304-3720 (Fax 386-304-3722) Sam Valenzisi
14" Dake MEP Cobra #350AX, auto, 14" blade diameter, 4-1/2" rnd cap, auto stock feed, pneumatic vise Camera Spec Sheet rfq
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.
14" Dake #350STSA, semi-auto, 3-3/8" rounds, 4-1/3" tubing, foot switch, air vise, #81246 rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith
14" Dake Tiger #350SX, semi-automatic geared head cold saw, automatic/manual air vise, coolant system, mitering, bar stop, #A3024 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
14" Dake / Mep #989-050 Cobra 350, cold, auto feed, mitre, s/n #50012-7, 1985, #9436 Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
14" Doringer #D350, circular cold saw, Quick acting manual vise, coolant system, stand, overload protection switch, blade, #A3755  Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
14" Doringer #D-350H, Cold Semi Automatic Cold Saw, serial #21304, #5014 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
14" Everett, wet type cold cut-off, 10 HP, hydraulic feed, coolant, extra 14" blade Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
14" Haberle #H350H, dual head, dual mitering, 54/108 RPM, auto downfd, air vises [751] Camera Spec Sheet rfq
Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski
14" Kalamazoo #C350A, saw, 9/18/36/74 RPM, 4.5" round @ 90 deg., auto feed, 1990' s Spec Sheet Visit Dealer's Equipment Listings  rfq
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell
14" Kalamazoo #KM14W, wet abrasive chop saw, stand, pneumatic holddowns, miter cutting, made in USA, #A3489 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
14" KMT #VELOX CT-350A, auto, non-ferr, NC controls, 2 spds 1800/3600 RPM, 4.75" rd, #9652 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
14" MEP #350CNCFE, programmable, miter, 4-1/2" rounds, 3-3/4" square, clean, #22097 Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
14" MEP #350CNCFE Cobra, 4-3/4", Automatic, 200 Total Hours, 1995 Camera Visit Dealer's Equipment Listings  rfq
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Fax 501-897-4090) Teresa Glover
14" Scotchman #CPO-350LT, cold saw, miter, 22/44 RPM, 2" solid rounds, coolant, new in stock, 2014, #28708 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
14" Scotchman, auto clamp, vise, downfeed, semi-automatic cycle Camera Spec Sheet rfq
PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) S. Mataviesko
14" Soco #HVS-375FA-DR, automatic cold saw, power clamping, power feed, 2007 rfq
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston
14" Soco #VS-355H/AC, Semi-Automatic Cold Saw, serial #1374, #5015 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
14" Startrite #CF315M, cold saw, #6690P Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
14" Thomas #115, semi-automatic cold saw, air head feed, air vise, mitering, coolant, #A1452 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
14.5" Dake #370PP, 14.5" diameter blade, miter, auto feed, 4.5 HP, 2007, S32754 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
15-3/4" Kaltenbach #SKl400, auto feed, 5.12" rounds, mitering, hydraulic clamps, 1985, #10784 Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
15-3/4" Kaltenbach #KKS400H, cold saw, hi-production, semi-auto, hydraulic up-stroking blade Camera  Show Video of Item Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
15-3/4" Kaltenbach #KKS400NA, cold sawing sys, semi-auto, dsgn for hi-prod/precision Camera  Show Video of Item Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
15-3/4" Kaltenbach #KKS401NA2000, CNC, prog.mitre, ex.lg.str, auto.bar load/unload, '95 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt
15-3/4" Kaltenbach #KKS401NA2000, CNC, prog.mitre, ex.lg.str, auto.bar load/unload, '95 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt
15.75" Kaltenbach #SKL 400 NA, cold saw, #9535 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel
15-3/4" Kaltenbach #SKL400NA, auto feed cold saw, PLC control, mitre cut capability rfq
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Fax 715-886-3016) Fred Parker
16" Eisele #VA-112-H, automatic, 24" feed stroke, down feed, serial #0154, #BT6675 Camera Visit Dealer's Equipment Listings  rfq
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand
16" Gernetti, auto stock feed, Serial #SIC 165.5A, 3 HP rfq
Bibb Machinery Sales, Macon, GA 478-788-1975 (Fax 478-788-1978) Robert/ John
16" Kaltenbach #SKL400, Automatic Non-Ferrous Cold Saw Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Scott / Mark
16" Wegoma #SD16S, double head, miter, adjustable cutting length to 10', 1993, #9278 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
18" Kalamazoo #K16-18, 10 HP, 1725 RPM, good, #1697 Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch
19" Kaltenbach #HDM1300, saw, 19" rounds, 17" square, 40" x 17-3/4" I beam rfq
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Thomas Noone
20" Elumatec #SA142/25, automatic, 5 HP, mitre, non-ferrous, 1998 Camera Spec Sheet rfq
Destiny Machinery Inc, Odessa, FL 727-376-2399 (Fax 727-372-8202) Dennis Laliberte
20" Porter #43-20J, stroke saw, hydraulic feed, 7-1/2 HP, tag #12275 Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
20" Porter #47A-20, stroke saw, tag #13444 Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
22" Eisele #VMS-VPV, circular cold saw Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Fax 905-803-9109) Bernie Walter
22" Eisele #VMS-VPV370, circular cold saw Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Fax 905-803-9109) Bernie Walter
23" Tekna #TK137 Mitering, 2800 RPM, horiz.& vert.vises, full enclosure, 3 KW motor, '12, #35623 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
24-13/16" Kaltenbach #RKT630, cold saw, upcut, hi-prod.semi-auto, structural steel sys Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
26" Trennjaeger #PCM-8 HD cold saw, blade speeds (6 steps) 52-166' per minute, 1979 Camera Spec Sheet rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
26" Trennjaeger Promobeam #PMC8-L, 3200mm x 1200mm, automatic Camera Spec Sheet rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen
31" x 14" Kaltenbach #HDM1300HGV, saw, 19" round, 31" x 14" rectangle, 39" x 18" I beam rfq
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Thomas Noone
32" Dia Blade, Italian, hydraulic, power feed, low price rfq
Global Machinery Sales, Miami, FL 305-635-6631 (Fax 305-635-0418) Rick Sotto
36" x 13" DoAll, contour band saw, 5/16" -1" x 175" L blade, blade welder, V/S drive, '68 rfq
Weaver Sheet Metal, Ephrata, PA 717-983-8333 (Fax 717-842-7922) Daniel/David Weaver
36" MSC #951467, contour band saw, blade welder, variable speed drive rfq
Weaver Sheet Metal, Ephrata, PA 717-983-8333 (Fax 717-842-7922) Daniel/David Weaver
36" Trennjaeger #lkh310/1000, traversing circular cold saw, extra blades, #A2949 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
44" Peddinghaus #VS-44-14, 14" capacity, 2 Spd, 1981 Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve
48" Clifton & Baird, heavy duty circular cold saw, 48" blade, 15 HP, self-centering vises, #26138 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
48" Kaltenbach HDM-48, semi-auto cold saw, hyd vise, coolant sys, vertical clamp, #4766 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
52" Kaltenbach #HDM1300HGV, w/3 extra blades, mitre base, 1970 Camera Spec Sheet rfq
InTech, Inc, Downers Grove, IL 219-397-7476 (Fax 219-397-7403) John Maslan
52" Trennjaeger #LKH420/1000, w/1 extra blade, Promacut control, serial #799 Camera Spec Sheet rfq
InTech, Inc, Downers Grove, IL 219-397-7476 (Fax 219-397-7403) John Maslan
52" Trennjaeger #LKH420/1000, cold saw, vert./horiz.clamping cylinders, stock #18841 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
Adige #M315A, cold saw, 315mm blade, 1988, #9526 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
Oliver #2023, non-ferrous Aluminum extrusion recut saw Camera Visit Dealer's Equipment Listings  rfq
Bass Machinery LLC, Toledo, OH 419-243-2277 (Fax 330-299-0520) Sales
Dake #350SA, cold saw, 14" blade diameter, 3.5 HP, push button or foot switch activation Camera Visit Dealer's Equipment Listings  rfq
Erickson Machine Tools Inc, Story City, IA 800-247-3905 (Fax 515-733-2929) Kurt Erickson
Dake MEP Cobra 350, semi-auto, auto air vise, 14" blade, 1700/3400 RPM, nice Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Fax 952-933-7229) J.Van Heuveln
DeWalt B&D 20" Carbide tip blade, 7.5 HP, power.infd on head, hd swing right/left, angles up/dwn rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
DeWalt B&D, radial arm w/(2) 20" bld, 7.5HP, material stock infd, 8' distance btwn.blades rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
KMT IMET #C300, cold saw, 3-1/4" rnd., 3" sq., 12" blade, mitering head, manual clamp, '03 rfq
Weaver Sheet Metal, Ephrata, PA 717-983-8333 (Fax 717-842-7922) Daniel/David Weaver
Pedrazolli #SCL102-3000, cut to length, #7715 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
Sampson #DC10 compound notch saw for vinyl, like new, tag #14485 Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
Scotchman #CPO-275HTPK, cold saw, hi-production, heavy duty, manual, power clamp, Quik Loc Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
Trennijager #LPC110-1400, semi-auto, s/n #gh1400, square 4-1/4" x 4 1/4" rectangular Camera rfq
HCI Machines, Venetia, PA 724-942-3382 (Fax 724-942-5194) Terry Blackman
Wegoma #MDS, double cut saw, 1995, #9279 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David
Wegoma #SD500, dual head, mitre, 20" blade, 5" x 13" cutting arera, 5 HP, 3450 RPM, '92, #9277 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Bill/David

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise