Browse:  Machinery Electrical
RSS Blog Surplus Record

SAWS, BAND, HORIZONTAL (Also See Vertical Band Saws)

 Westbrook Engr.buy/sell fabricating equipment
There are 299 listings in this category
File update: Fri, Jul 1, 2016 01:11
Advanced Search
Sort by:
Original Sort
5" x 18" Peerless Champ VII Manual, 10" rnds, 1" blade, 2 HP, 402 FPM, miter, vise, '05, #9697  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6" x 9.5" Saber #CY275, 1 HP, 220 1 ph, 1" blade, 0-290 vari-speed, coolant, head swivels 60 deg, quick vise, hyd & pull-down head  Camera Spec Sheet rfq
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
6.8" x 11.8" Amada #HFA250W, fully automatic horizontal band saw, 1995  Camera Visit Dealer's Equipment Listings  rfq
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
7.75" x 9.5" FMB Pheonix, horizontal miter bandsaw, pull down type, swivel head to right 60°, table vise, work stop, 2005  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
7.75" x 9.5" FMB Pheonix, horizontal miter bandsaw, pull down type, swivel head to right 60°, table vise, work stop, 2004  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
9" x 10" DoAll #C5A, auto., 9.75" round, 1" bld, 60" infd conv, .25" -14" index, s/n #31-73203  Camera Spec Sheet rfq
Holt Equipment, Annandale, MN 952-938-2202 (Email: genesis@skypoint.com) Wayne Mader
9" x 12" DoAll #C912M, 60-360 FPM, power.head lift, coolant, 1978, #17183  Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
9" x 12" Kalamazoo #AH9AW, auto roll feed, parts counter, emergency stop, coolant system, auto barfeed, used, #A3859  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
9" x 12" Kalamazoo #H9AWV, 9" round, 1" bld, adj.angle vise, vari-speed, manual, s/n #17616  Spec Sheet rfq
Holt Equipment, Annandale, MN 952-938-2202 (Email: genesis@skypoint.com) Wayne Mader
9" x 16" Birmingham #UE916A, hydraulic downfeed, 4 speed 82-235, 1" blade, clnt, 1-1/2 HP  rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
9" x 16" DoAll #C916, horizontal band saw, 5-1/2" vise, 2 HP, 1800 RPM  Camera Visit Dealer's Equipment Listings  rfq
Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Email: machinery@cnctool.com) John Roedel
9" x 16" DoAll #C916, 105-275 FPM, 1" blade, blade guards, coolant, 2 HP, s/n #470-90744, 1990, #29407  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
9" x 16" DoAll #C916, 105-275 FPM, 1" blade, coolant, blade guards, 2 HP, s/n #527-96252, 1996, #29332  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
9" x 16" DoAll #C916A, horizontal bandsaw, 4' of roll conveyor, blade guides, #3466  rfq
DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Email: nmartins@dipaolocnc.com) Nelson Martins
9" x 16" DoAll #C916A, 105-275 FPM vari-speed, 3/16" -24" index length, 2000, #40737  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
9" x 16" DoAll #C916A, automatic, power vertical pinch rollers, parts counter, work light, discharge tray, coolant system, #A4385  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
9" x 16" DoAll #C916A, auto.index, 1" blade, 105-275 FPM, coolant, 2 HP, s/n #528-96200, 1996, #29031  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
9" x 16" DoAll #C916A, horizontal, automatic pinch roller feed, excellent condition  Camera rfq
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney
9" x 16" DoAll #C916A, auto feed, 1" blade, 2 HP, 1989  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
9" x 16" DoAll #C916M, 159" band length, 105-275 FPM, pnu.hd.lift, 230/460 V., #81876  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
9" x 16" DoAll #C916M, 10-3/4" rounds, 3/4 HP, V/S, coolant, air lift, USA, nice, 1989  Camera Spec Sheet rfq
American Machinery Liquidators, East Brunswick, NJ 732-390-0006 (Email: sales@americanmachinery.com) Marc Gallanter
9" x 16" DoAll #C916M, horizontal band saw, 159" x 1" blade, coolant, 2 HP, 1993, #63438  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
9" x 16" DoAll #C916M, horiz band saw, 159" band length, coolant pump, mat'l support  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman
9" x 16" DoAll #C916S, miter, 105-275 FPM, 1" blade, coolant, clean, 2 HP, s/n #489-91243, 1991, #29382  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
9" x 16" DoAll #C916SA, swivel automatic horizontal band saw, #9987  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
9" x 16" DoAll #C916SA, swivel head auto., 60°miter, auto length & feed cut, 1998  Camera Spec Sheet rfq
Centra Corporation, White Marsh, MD 443-317-8414 (Email: sr@centracorp.com) Ed/Mike/Thomas
9" x 16" Saber #1018M, miter, 10" rounds, 1" blade, 3 HP, coolant, worklamp  Camera Spec Sheet rfq
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
9" x 17" Wells #W-9, hydraulic, 70-380 SFPM, 1" x. 035" x 11'6" blade, vise, 3 HP, #82198  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
9" x 18" Cosen #SH-460M, miter, semi-auto, 1" blade, coolant system, 2 HP, new, in stock, #29455  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
9" x 18" WF Wells #W9, Twin Post, From Service, Checked & Cycled, 1983, Tag #15623  rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
9" x 18" WF Wells #W9, Twin Post, From Service, Checked & Cycled, 1970' s  rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
9" x 18" W.F. Wells #W-9-1, semi-auto twin post horizontal band saw, 9" rounds  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Email: sales@lakeshoremachinetool.com) John Rogers
9.4" x 9.4" Tubemart, w/mitering capabilities & descent control, brand new, #26163  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
9.8" x 11.8" Amada #HA-250W, automatic horizontal bandsaw, 138" x 1-1/4" x .042" standard blade size, 78-262 FPM, chip auger, 2000  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
10" x 10" Acra #HL250, automatic feed, 1.25" blade, coolant  rfq
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
10" x 10" Amada #HA250W, 1-1/4" blade, prog.auto cycle, auto feed, 1991, #25467  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
10" x 10" Amada #HFA250W, hydraulic, auto cycle, 1.25" blade, auger, clnt, 5 HP, 1991, #18026  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
10" x 10" Cosen #C260NC, fully programmable auto.feed, 1.25" blade, 5 HP, s/n #26C1040473, new, in stock, 2015, #29180  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10" x 10" Daito #DA260W, shuttle, best saw in the business, 1994  Camera Spec Sheet rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
10" x 10" Daito #W250B, automatic horizontal band saw, 10" rounds, 1-1/4" blade, 5 HP, clean, #25913  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10" x 10" Daito #W250B, horizontal bandsaw, 1-1/4" blade, 5 HP, auto, dual col., low price  rfq
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: sales@smfmachinetools.com) Teresa Glover
10" x 10" DoAll #C-7, horizontal band saw, #1919  Camera Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch
10" x 10" Hyd-Mech #H-10A, 1-1/4" blade, 5 HP, auto dual col., Demo  Camera Visit Dealer's Equipment Listings  rfq
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: sales@smfmachinetools.com) Teresa Glover
10" x 10" Kasto #SBA260AU, automatic  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
10" x 10" Kasto #SBA260AU, auto shuttle table, chip conveyor, coolant pump  Camera rfq
Industrial Plant Equipment, Northbrook, IL 847-998-8882 (Email: sales@ipeinfo.com) Jerry Kolb
10" x 11" Amada #HA-250, 1" blade, 3 HP, auto feed, multi-index, coolant, 1981, #9700  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10" x 11" Amada #HA250-W, horizontal band saw, 1-1/4" x 138" x.037" blade, 5 HP, chip auger, auto bar feeder, 1998, #15230  Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
10" x 11" Amada #HFA-250 W, automatic horizontal band saw, s/n #25060119, 1990, #5777  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
10" x 11" Kysor Johnson (Amada) #HA-250, 1" blade, 3 HP, auto feed, multi-index, '81, #9701  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10" x 12" Amada #HDA-250, fully auto, barfeed, chip auger, hydraulic vise, digital readout, #A3687  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10" x 12" DoAll #C260A, automatic, 5 HP, 1-1/4" blade, V/S, chip auger, 1987  Camera rfq
Alenco Tool Supply, Chicago, IL 773-725-5700 (Email: sales@alencotool.com) Paul Braeseke
10" x 12" DoAll #C-260A, automatic feed horizontal band saw, 1-1/4" blade, 60-350 FPM, 5 HP, clean, 1989, #28622  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10" x 12" DoAll #C-260A, horizontal band saw, auto.feed, 138" X 1-1/4" x .042" blade, 60-350 FPM, 5 HP, clean, #29141  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10" x 12" Hem #750A, auto horiz bandsaw, pneumatic barfd, pneumatic clamp vise, #4984  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
10" x 12" Peerless Medalist #102, auto, 3 HP, 1" blade, 0-48" feed, coolant, 1976, #9436  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10" x 14" Marvel Spartan #PA13/ 2PC, fully auto.band saw, 13" rounds, 1-1/4" blade, 5 HP  Camera Spec Sheet rfq
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers
10" x 15" W.F. Wells #W10-2U, auto, dual post, 1" blade, 60-425 FPM, vari vise pressure  Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
10" x 16" Clausing #MS1218VS, horizontal band saw, 12" round, 80-360 FPM, 2 HP, #66162  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10" x 16" Startrite, 8-blade speeds 20-330 FPM, 2 HP, 1" x 132" x.035" blade, 1989, #2619  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Email: bill@gahrmachine.com) Bill Rhea
10" x 16" Wells #1016, 2 HP, 1" blade, 50-275 SFPM, 230/460 V., 2000, #4414  Camera rfq
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Email: djm@diamondjackmachinery.com) Jack Yancey
10" x 16" Wellsaw #1016, 1" blade, 2 HP drive motor, on casters  rfq
Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Email: bgibson@advancedmachinery.com) Bob Gibson
10" x 16" Wellsaw #1016, portable horizontal band saw, serial #1218  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
10" x 17" W.F. Wells #W-10-2A, horizontal saw, #12070  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
10" x 17" Wells #W-10-2, horizontal band saw, 2-post, 1" blade  Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
10" x 18" Johnson #JH-10, 1" blade, coolant, 1 HP, 220/440V., 50, 90, 160, 270 FPM  Camera rfq
Spier Machinery Corp, North Tonawanda, NY 716-694-4711 (Email: paul@spiermachinery.com) Paul Shear
10" x 18" Kysor Johnson #J, 1" blade, 1 HP, wet  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
10" Daito #250B Wonder Saw, 1-1/4" x 12' blade, hydraulic, 5 HP, serial #19U004B2  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling
10" Ellis #1600, 10" round, double swivel miter, new with 1 year warranty  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln
10" FMB Phoenix, 1-1/16" W blade, Accu-Cut blade guide sys, 2 speeds, never used, '15  Camera rfq
Equipment Resource Connection, Woodruff, SC 864-303-1512 (Email: jamier@equipmentrecon.com) Jack / Jamie
10" Victor #H10-A, automatic band saw, 1" blade, 2 HP  rfq
MrTool.net, LLC, Baton Rouge, LA 225-324-3097 (Email: sales@mrtool.net) Keith Ellison
10.2" x 11.8" Behringer #HBP260A, auto, 1-1/4" blade, 65-450 FPM, 3 HP, chip auger, VVP, '94  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
10.2" x 11.8" Behringer #HBP-260A, auto feed, 1-1/4" blade, 62-426 FPM, 5.5 HP, 1986  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
10-3/4" x 16" DoAll #C916A-S, automatic, miter cutting to 45 deg, 1" blade, 1998  Camera Spec Sheet rfq
Centra Corporation, White Marsh, MD 443-317-8414 (Email: sr@centracorp.com) Ed/Mike/Thomas
11" x 8" Summit #250M, 10" rounds, 11.5" x 8.5" flats, (4) speed, #26937  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
11" x 11" Missler #DEB280N, heavy duty, fully auto, 20" infeed, Compucut control  Camera Spec Sheet Show Video of Item rfq
Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Email: sales@automatics.com) Steve Beck
11" x 13-1/2" Hyd-Mech #H-11A, band saw, 1-1/4" x 14'9" blade, 49-380 SFM, remnant 1.5" (11" w/bundling), brand new floor demo saw  Camera Spec Sheet PDF rfq
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
11" x 18" Dake Johnson #JH10, horizontal band saw, coolant system, work length stop, 1 HP, #A2488  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
11" x 19" Cosen #SH-500M, semi-auto, miter, 1" blade, 3 HP, new, in stock, 2015, #29202  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
11.8" x 10.2" Behringer #HBP260, horizontal band saw, s/n #288604, 1988, #4804  Camera Spec Sheet rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
11.81" x 11.81" Behringer #HBP303A, horizontal band saw, auto feed, 5.5 HP, 1993, #12250  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan
12" x 10" Daito #GA260WII, auto cycle, 1.25" blade, 5 HP, 1998, #18092  Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 10-1/4" DoAll #C-260A, horizontal saw, #10846  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12" x 12" Behringer #HBP303A, auto.saw, 1999, #3847  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) W Robert O'Neal
12" x 12" Cosen #AH-300, auto, 1-1/4" bld, 314 SFPM, chip auger, 5 HP, split front vise, '98  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
12" x 12" DoAll #C-305A, automatic horizontal band saw, s/n #497-93238, 1993, #5926  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
12" x 12" DoAll #C-305A, 1-1/4" blade, 144" length, 5 HP, stock feed vise, DRO, 1992  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch
12" x 12" DoAll #C-305NC, GE Fanuc PLC, 1.25" x 144" blade, 5HP, 450 FPM, auto cycle, '00  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn
12" x 12" Hem #750M, semi-auto, power vise & elev., 300 FPM, 3/4" blade, 2 HP, #UD42201  Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
12" x 12" Hyd-Mech #H-12A, horizontal band saw, 13'6" x 1-1/4" blade, PLC 100 Microprocessor, hydraulic vise & downfeed, coolant, #13499J  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin
12" x 12" Hyd-Mech #H-12A, horizontal band saw, 13'6" x 1-1/4" blade, 75-400 FPM  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
12" x 12" Hyd-Mech #H-12A, auto, 12" rounds, hydraulic downfeed, bundling, clamping, 2000  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman
12" x 12" Kaltenbach #HB320NC, auto cycle, twin post, 1-1/4" blade, #17585  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 12" Wells #1270, auto barfeed, 12-3/4" rounds, 1" x 13' blade, vari feed, #81059  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
12" x 13" DoAll #C-1213M, semi-automatic horizontal band saw, hydraulic band tension, 16" heat treated ductile iron wheels, vise, #A2516  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12" x 13" Lian Feng #LF-BS12AA, auto feed, 1" band width, 3 HP, 1988  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
12" x 13.4" Peerless #HB1212NC, auto horizontal band saw, s/n #133300, 2006, #6573P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
12" x 16" DoAll #C-80, 1" x 14" x .035" blade, feed table  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
12" x 16" DoAll #C-80, horizontal band saw, 144" x 1" blade, 0-450 FPM  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
12" x 16" DoAll #C-80, horizontal saw, #10632  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12" x 16" DoAll #C-80, automatic horizontal band saw, 12.75" rounds, 24" maximum auto.stroke  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Gulf Coast Machinery LLC, Foley, AL 205-368-7977 (Email: don4machines@gmail.com) Don Bentley
12" x 16" DoAll #C-410A, auto feed, 1-1/2" blade, 7.5 HP, 1995  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
12" x 16" DoAll #C-1216A, 1-1/4" blade, 5 HP, full auto, 24" feed str, 450 fpm, '85, #9473  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
12" x 16" DoAll #C-1216A, 30" work height, 40-450 FPM  Camera Spec Sheet rfq
Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Email: sales@automatics.com) Steve Beck
12" x 16" DoAll #C-1216M, semi-automatic horizontal band saw, chip auger, hydraulic bar feed, chip brush, #A2708  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12" x 16" DoAll horizontal band saw, 40-450 FPM, auto.shuttle type barfeed, 24" stroke  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
12" x 16" Everising #SH-4033NC, CNC automatic horizontal bandsaw, s/n #0100249, used, #A4433  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12" x 16" Peerless #1400, 12-3/4" rounds, 50-450 FPM, 1" x .035" x 144" blade, 5 HP, #62503  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
12" x 16" Peerless Medalist #1400, semi-auto, 18' infeed roller table, 106" powered infeed, 54" outfeed roller table, #27399  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
12" x 16" Peerless #1400, 1" blade, 50-450 FPM, auto feed, coolant, 5 HP, '73, #9928  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
12" x 16" Wellsaw #1216HA, band saw, hydraulic, twin column, coolant, 1984, #51329  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
12" x 20" DoAll #C1220A, auto, 16" round, 1.5" blade, 10 HP, 450 FPM, coolant, 1981, TK-19363  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
12" x 20" DoAll #C-80, 1" x 144" blade, 8' entry conveyor, 220 V., 3 phase  rfq
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone
12" x 24" Saber #DM13SA, semi-auto, double miter, 13" rounds, 1-1/4" blade, motor driven work table, hyd vise, laser light, 5 HP  Camera Spec Sheet rfq
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
12" Cosen #C-300NC, fully automatic horizontal band saw, vises, chip auger, coolant, 2006  Camera Spec Sheet Show Video of Item rfq
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers
12.5" x 12.5" Daito #GA320, 13'6" x 1.25" blade, 7 HP, 25.5" bed height, manual, 1984, #9611  Camera Spec Sheet rfq
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer
12.75" x 11" Hem #H-101-A, 5 HP, 1750 RPM, 1.25" blade, front & rear vise, chip pan, '93  Camera PDF rfq
520 Machinery Sales LLC, Schaumburg, IL 888-520-1768 (Email: everett@520machinery.com) Everett Dahlberg
12.75" x 12.75" Continental International #BS-120A, manual, blade guide, auto & semi-auto all function control, used, #A3973  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
13" x 13" DoAll #3300NC, band saw, 2003, #9386  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & H Machinery Inc, Toledo, OH 419-841-3586 (Email: sales@dnhmachinery.com) Sales
13" x 13" DoAll #C3350, auto., dual col., hydraulic band tension, hydraulic motor, chip. conveyor, '06  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch
13" x 13" DoAll #C-3350NC, GE Fanuc control, auto feed, full enclosure, 2005  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
13" x 13" Marvel #13A/M11, automatic, 60-450 FPM, 3 HP  Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
13" x 14" Marvel Spartan #PA-13/2, auto fd, 1.25" blade, 80-400FPM, clnt blade brush, '98  Camera Spec Sheet rfq
HPI Machinery Sales, Hartland, WI 262-538-1147 (Email: danhuck@prodigy.net) Dan Huck
13" x 14" Marvel Spartan #PA13/2, auto feed, 1998  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
13" x 14" Marvel #PA13/3, 1-1/4" blade, dual hydraulic clamping, #24456  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
13" x 14" Spartan /Marvel #PA13, 13" rounds, auto.feed, 1.25" blade, s/n #EPA130400, 5 HP, 1997, #28770  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
13" x 14" Spartan /Marvel #PA13/2, auto feed, 13" rounds, 1.25" blade, 5 HP, 1996, #28904  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
13" x 14" Spartan #PA13/2PC, automatic horizontal bandsaw, 80-400 SFPM, chip auger, coolant, 5 HP, 13'6" x 1.25" x.042" blade  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
13" x 14" Spartan #PA13/3, automatic horizontal bandsaw, 80-400 SFPM, chip auger, coolant, 13'6" x 1.25" x .042" blade, 2004  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
13" x 14" Spartan #PA-13/N, auto, 1-1/4" bld, 5 HP, 80-450 FPM, 20" auto fd, chip auger, '96  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
13" x 16" DoAll #C-3300NC, prog.horizontal, UniOP control, 50-500 FPM, 24" stroke, 5 HP, '97  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton
13" x 17" Summit #350M, hydraulic down feed, vari blade speed 75-350, 1" blade, 5 HP  Spec Sheet rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
13" x 18" Hyd-Mech #S-20, manual, 1" blade, 2 HP, 75-400 SFM, 1995  Camera Spec Sheet rfq
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
13" x 18" Hyd-Mech #S-20 Series II, horizontal saw, #11732  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
13" x 18" Hyd-Mech #S-20 Series II, miter, 1" blade, coolant, 2 HP, s/n #60901753H, 2001, #29412  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
13" x 18" Hyd-Mech #S20A, auto, 1" blade, 3 HP, out of stock switch, 1994  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
13" x 18" Hyd-Mech #S20A, 1" blade, 3 HP, auto, outfeed table, coolant, 400 SFM, 1989, #HB-19700  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
13" x 18" Hyd-Mech #S20A, automatic swivel head, serial #10189305, 1989, #6468P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
13" x 18" Hyd-Mech #S20A, 0-60°miter, 1" x 178" blade, vari vise pressure option, new  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
13" x 18" Hyd-Mech #S20A, auto, 1" blade, 3 HP, 75-400 SPM, PLC100, V/S, chip brush, 1998  Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
13" x 18" Hyd-Mech #S20M, auto pivot style, variable vise pressure option, new, #071404  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
13" x 18" Hyd-Mech #S20P Series III, 2015  Camera rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
13" x 18" Saber #W1318S, 30 deg miter, 13" round, 1" blade, 3 HP, coolant, quick vise, in & outfeed tables  Camera Spec Sheet rfq
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff
13" x 18" Wellsaw #1318, 13" rounds, 70-375 FPM, 1" blade, wet, 3 HP, s/n #5122, new, in stock, 2016, #29299  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
13" x 19" Kalamazoo #13AW, 1" blade, 2 HP, 1982  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
13" Dake #LE13A / 983103, 1.75" blade, PLC control, bundling vise, piece counter, 2000  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Shamrock Machinery Co, Houston, TX 713-699-3355 (Email: sales@shamrockmachinery.com) Mike Richards
14" x 8" Metora #MB300, 12.5" rounds, 12" x 12" square, 80-350 FPM, mitre cutting, #26936  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
14" x 10" FMB Triton, serial #82652, 1998  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
14" x 14" Behringer #HBP-360A, fully automatic heavy duty dual column horizontal band saw, coolant system, #A3667  Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
14" x 14" Hem #H105A, 1-1/4" blade, serial #515396, #62500  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
14" x 14" Hyd-Mech #H-14, horizontal band saw, 14" sq, 1.5" blade, 10 HP, 1990  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman
14" x 14" Hyd-Mech #H-14, auto, 19" diameter blade wheel, 50-350 SFM, blade brush, 7.5 HP  Camera Spec Sheet Show Video of Item rfq
Reliable Equipment LLC, Lake Saint Louis, MO 314-398-7414 (Email: Jkwapich@reliableequipmentco.com) John Kwapich
14" x 14" Hyd-Mech #H-14, Automatic Band Saw, 1-1/2" Blade, 10 HP  rfq
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone
14" x 14" Hyd-Mech #H-14A, horizontal band saw, #7279  Camera Spec Sheet rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
14" x 14" Kasto #HBA360AU, 14.2" round, 1.50" blade, bar feed, exit conv, 10 HP, '90, #22735  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
14" x 14" Kasto #HBA360AU, 20' motorized bar feed, (3) available  rfq
Noll Machinery Inc, Cleveland, OH 216-332-1870 (Email: sales@nollmachinery.com) Fred Mervis
14" x 14" Kasto #HBA360AU, 65.6-426.5 FPM, 1-1/2" blade, hydraulic vise, 13-1/2 HP, 1997  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
14" x 14" Marvel #13A, 1-1/4" width x .042" thick blade, in/outfeed, 1990, S33559  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
14" x 14" Marvel #13A4PC, 10' auto stock-feed table, (2) moveable hyd stock-feeding & clamping devises, 5 HP, #27529  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
14" x 16" DoAll #C-4100, horizontal band saw, 1-1/4" blade, automatic  rfq
S D Cohen Machinery Ltd, Dundas, ON 905-921-2001 (Email: jonathan@cohenmachinery.com) Jonathan Riley
14" x 16" DoAll #C-4100A, horiz.bandsaw, 40-360 FPM, hydraulic powerd.vises, 1993, #149924  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus
14" x 16" DoAll #C-4100A, 24" auto feed, multi cycle, 1-1/2" blade, 7-1/2 HP, 1993, #9421  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
14" x 16" DoAll #C-4100A, auto.feed, 16" rounds, 1.5" blade, 40-360 FPM, 10 HP, 1994, #28914  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
14" x 16" DoAll #C-4100NC, production saw, UniOP control., 21" wheel, 40-360 FPM, 1998  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
14" x 16" DoAll #C410A, automatic stock advance, 1-1/2" blade, 7-1/2 HP  Camera rfq
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy
14" x 16" DoAll #C410A, auto shuttle vise feed, 10 HP, 1-1/2" blade, 1992, #153542  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
14" x 16" Hem #H105A, automatic horizontal band saw, s/n #515396, 1996, #6355P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
14" x 16" Hem #H105A, auto.heavy duty, blade brush, auto.barfeed, s/n #474695, used, #A4317  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
14" x 16" Hem #H105A, automatic heavy horizontal band saw, adjustable, flood coolant system, bundling attachment, #A3670  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
14" x 17" Behringer #HBP340A, automatic horizontal band saw  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
14" x 18" Spartan / Marvel #PA18, 18" rounds, auto.feed, coolant system, 1.5" blade, clean, 1996, #28772  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
14" x 18" Spartan #PA18/3EPC, automatic horizontal bandsaw, 15'4" x 1.5" x .050" blade, 70-330 FPM, 2011  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
14" x 20" DoAll #500SNC, miter-cut, coolant, auto.index, 50-400 FPM, 2005, #10006  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
14" x 20" Hem Twister, high speed, 60-300 SFPM, clamping vise, 24" load table, clnt, #81323  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
14" x 20" Hem Twister automatic feed mitering horizontal band saw, 1-1/4" blade, 5 HP, 2000, #28373  Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
14" Behringer #HPB 360A, automatic, 1-1/2" blade, infeed, 1995  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Email: machinery@cnctool.com) John Roedel
14" Daito #GA330, automatic, 1.25" x 14" blade, 66-525 IPM, power in table  Camera rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
14.1" x 14.1" Behringer #HBP360A, double column, automatic, 1999, #34967  Camera Visit Dealer's Equipment Listings  rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Email: sales@machinerynetwork.com) Sales Dept.
14.2" x 14.2" Kasto #HBA-360UA, horizontal band saw, 14.2" x 14.2" maximum square, 1990  rfq
WI Equipment Corp, Bay Shore, NY 631-666-6642 (Email: Metals@wieqcorp.com) Steven Bankin
14.2" x 14.2" Spartan #PA360-EPC, automatic horiz bandsaw, post type, 14'6" x 1.25" x.043" blade, 65-330 SFPM, chip auger, clnt, 2012  rfq Auction
Hoff Online Auctions, Minneapolis, MN 612-521-5500 (Email: randy.baumbach@hoffonlineauctions.com) Denny Hoff
15" x 15" Cosen #NC-4038H, double column, hydraulic feed & vise, 1.61" wide blade, 2001, #26612  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
15" x 17" W.F. Wells #F15, horizontal band saw, #4776  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
15" x 17" W.F. Wells #F15, twin post, from service, checked & cycled, 1980' s, Tag #15624  rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
15" x 17" W.F. Wells #F15, twin post, hydraulic BF multiple index, s/n A1089781230, #A4067  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
15" x 17" W.F. Wells & Sons #F-15-1, hydraulic raise & fall saw head, coolant system, s/n #A1089781230, used, #A4281  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
15" x 17" W.F. Wells #F15-2, dual post, auto, 1" blade, 3 HP, 24" barfeed, 1982  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
15" x 20" Marvel #15A, auto., 15'6" x 1-1/4" blade, adj. hydraulic rise & fall, 1977, #56489  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
15" x 20" Marvel #15A4, w/hydraulic drive tables  rfq
American Steel Products Co, Toledo, OH 419-843-6051 (Email: ford@americansteel.com) Ford Cauffiel
15" Vobau #PS-R-515-400, round saw  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
15-3/4" x 15-3/4" Kasto Twin #L4, band saw, 5.28 HP, 20' conveyor, 2001, #82067  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
15.98" x 15.98" Amada #HFA 400S, automatic band saw, 1991  Camera Spec Sheet rfq
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
16" x 12.75" HEM, horizontal miter saw, #10119  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
16" x 14" Hem #1200M, 1.25" blade width  Camera Spec Sheet PDF rfq
RAAR Group, Redondo Beach, CA 310-487-3800 (Email: Rick.raargroup@gmail.com) Rick Schotts
16" x 16" Amada #CTB400, 10 HP, 1.18" - 16" round, 2008  Camera rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
16" x 16" Amada #HA-400, auto.feed, 7.5 HP, 1.25" blade, 50-295 FPM, 1993, #9863  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
16" x 16" Amada #HFA-400W, hydraulic, 15' x .050" x 1-1/2" blade, 50-295 FPM, 1989, #82066  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
16" x 16" Amada #HFA-400W, fully automatic, 2 hydraulic vises, excellent, 1994  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Email: mail@rohnermachinery.com) Chris Rohner
16" x 16" Amada #HFA400W, 50-295 FPM, .050" x 1-1/2" x 15' blade, hydraulic vises, 8 HP, #64738  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 16" Daito #GA410W, 16" auto feed, 69-551' per min, programmable, coolant, 1991  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
16" x 16" DoAll #C4100NC, prog.control, 1.5" x 186" blade, auto cycle, vises, coolant, 1991  Camera rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
16" x 16" DoAll #C4100NC, 1.5" bld, prog.control, 10 HP, clnt, auger, vise, discharge tray, '01  Camera rfq
520 Machinery Sales LLC, Schaumburg, IL 888-520-1768 (Email: everett@520machinery.com) Everett Dahlberg
16" x 16" DoAll #C4100NC, coolant sys., V-speed, feed conveyor, s/n #51495157, used, #A3294  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
16" x 16" Hyd-Mech #H16, horizontal saw with PLC 100 control, #9896  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
16" x 16" Kasto Twin #A4, auto, 1.5" bld, 65-360 FPM, 5.4 HP, chip conv, blade brush, 2008  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
16" x 16" W.F. Wells #F-15-3U, band saw, 1-1/4" x 14'6" blade, auto.barfeed, '91, #56260  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 17" Startrite #H410A, HD automatic band saw, coolant, 7.5 HP  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp
16" x 17" W.F. Wells #F-16-2A, hydraulic, twin col., 15' x 1-1/4" blade, 60-425 SFPM, 1998, #24903  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.
16" x 17-3/4" Startrite #H410A, 1-1/2" blade, 7-1/2 HP, auto.advance, clnt, holddown, nice  Camera rfq
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy
16" x 18" Kysor Johnson #H-450HD, miter, 1.5" blade, 5 HP, 1975  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
16" x 20" Hem #1200LA, auto, 15' x1-1/4" x.042", 400 IPM, auto index, 10' shuttle table, '81  Camera Visit Dealer's Equipment Listings  rfq
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: sales@greenwayassoc.com) Clark Groeneweg
16" x 20" Marvel #15A9PC, prog.auto.horizontal band saw, 55-400 FPM, 1-1/4" blade, '94  Camera Spec Sheet rfq
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton
16" x 20" Summit #500SA, hydraulic down feed, vari blade speed 50-380, 1.5" blade, 7.5 HP  Spec Sheet rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
16" x 20" WF Wells #F-1620A-CNC, twin post design, 7-1/2 HP, full CNC indexing, Operator touch screen, new in stock  rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
16" x 22" Hem #Cyclone A-C, 45°/60°miter, auto feed, 1.25" band width, 7.5 HP, 2008  Camera Visit Dealer's Equipment Listings  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
16" x 22" Hem #Cyclone A-C, automatic feed mitering horizontal band saw, 16' x 1-1/4" x .042" blade, clean, 2006, #29284  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
16" x 22" Hem #Cyclone M, horizontal band saw swivel head, s/n #1019508, '08, #6354P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
16" x 23" Hem #Cyclone Automatic, cut watcher blade positioning, auto shuttle table, variable vise pressure, 7.5 HP, 2006  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
16" x 25" Hyd-Mech #M-16A, auto, 1-1/4" blade, 50-350 SPM, 7.5 HP, PLC 100, VVP, conv  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
16" x 25" Hyd-Mech #M16A, fully auto, w/PLC control, overhead bundling, 2008  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano
16" x 27.5" Behringer #HPB420, semi-auto, 65-459 FPM, 5 HP, hydraulic vise, #4764  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
16" Amada #HA16S, auto horiz band saw, 1-1/4" blade, 7.5 HP, s/n 407-00009, 1986, #1900  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch
16" DoAll #C-4, 10" round, 16" flat, 1" x 132" blade, 65-185 FPM, 3/4 HP regulate downfeed  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
16-1/2" x 16-1/2" Missler #DEB420, auto, 2" bld, 32-394 fpm, Compucut control, multi index, '89  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
17-3/4" x 10" Kysor Johnson #HA16, horizontal band saw, 16" round, 16" x 16" square, 180" x 1-1/4" x.042" blade, 65-400 FPM, 1978, #15212  Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
18" x 9" Kalamazoo #AH9AW, horizontal band saw, serial #AH1139  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
18" x 18" Everising #S-460HB, horiz.auto.band saw, s/n #19134, 184" x 1.6" x.05" blade  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Email: bill@gahrmachine.com) Bill Rhea
18" x 20" HEM #F130HA-DC CCT, horizontal band saw, s/n #582897, 1997, #6374  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
18" x 20" Hem #H130HA-DC, double col, 1.5" bld, auto cycle, 3 hydraulic vise, clnt, 7.5hp, '93, #18128  Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
18" x 20" HEM #H130HM-DC, semi-auto.horizontal band saw, s/n #524196, 1996, #4973  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
18" x 20" Hyd-Mech #V-18, semi-automatic, 1-1/4" blade, 65-385 SFM, 2 full strokes, 5 HP  Camera Visit Dealer's Equipment Listings  rfq
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Email: Sales@normanmachinetool.com) Mike Norman
18" x 22" Marvel #8 Mark II, band saw, capacity @ 45° 18" x 12.75", 50-450 FPM  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Email: sales@amindust.com) Curt Wyman
18" x 24" HEM #VT120HA-60, automatic hitch feed swivel head, used, #A4453  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
18" x 27" HEM #WF-130HA-DC, automatic, wide flange, s/n #700499, 1999, #6978P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
18" x 27" Hyd-Mech #S-25A, auto, 1-1/2" blade, 40" str barfd, 10 HP, 30°miter, multi str, '89  Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
18" x 27" Hyd-Mech #S-25A, fully automatic horizontal band saw  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
18" x 27" Hyd-Mech #S-25A, horizontal band saw, 1.5" x 18'10" blade, coolant, 1994, #64676  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
18" x 27" Hyd-Mech #S-25A, automatic horizontal band saw with auto feed  Camera PDF Visit Dealer's Equipment Listings  rfq
PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko
18" x 31-1/2" Amada #HFA-700, hydraulic, .46-315 FPM, 28" rnds, .063" x 2" x 25' blade, hydraulic vise, '86  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
18" x 38" Gernetti #38/18, twin column band saw, 17 HP, 1998  Camera rfq
JPS International Inc, Santa Ana, CA 949-510-0479 (Email: pmj@jpsint.com) Peter M Janes Jr
18" x 40" Behringer, band saw, miter +/-45°  Spec Sheet rfq
Maple Machine Service Inc, Kankakee, IL 815-937-5757 (Email: maplemsi@sbcglobal.net) Heinz Klemm
20" x 16" Marvel #15A, 1-1/4" blade, Marvel PLC control (updated), infeed shuttle & conveyor   Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
20" x 20" Amada #HFA20S, auto feed, 1.5" blade, 50-295 FPM, multi-stroke, auger, '96, #9862  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
20" x 20" Amada #HFA500S, horizontal band saw, automatic, hydraulic clamp, 1995, #18544  Camera Spec Sheet rfq
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.
20" x 20" Amada #HFA500S, automatic horizontal saw, 1995, #11192  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
20" x 20" Behringer #HBP500A, 2-post, 1-1/2" blade, 6.5 HP motor, auto feed, 1987, #9542  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
20" x 20" Behringer #HBP-534A-3000, CNC auto.horiz.saw, 23.11' x2" x.063" blade, #65690  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
20" x 20" Behringer #HBP534GA, auto horizontal band saw, 283" x 2" x .063" blade, 10 HP, serial #605356, 2005, #13226J  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin
20" x 20" Behringer #HBP534NA1000, auto.horizontal band saw, 10 HP, 2000, #62469  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
20" x 20" Behringer #HPB534GA, auto feed, 2" blade, 10 HP, 2005  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
20" x 20" Hem #H130HA-DC-4, double column, auto feed, chip auger system, 1.5" blade, 10 HP, s/n #907905, 2005, #28915  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
20" x 20" Jaespa #W420, Auto index, Bundle Clamp, 1990, Tag #15224  Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
20" x 22" Spartan #PB-20, horizontal saw, #9570  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
20" x 30" Hyd-Mech #M20A, 90-30°miter, 1.5" bld, vari-vise, o/head bundling, new, #071454S  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis
20" x 30" Hyd-Mech #M-20A, auto.band saw, 20" round, 20'6" x 1-1/2" blade, 10 HP, 2012  rfq
Forge Manufacturing Solutions, Ankeny, IA 515-249-8428 (Email: info@forge-usa.com) Paul Farrell
20" Behringer #HBP500A, automatic, 7.5 HP, variable vise pressure, coolant system  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Email: bernie@westwaymachinery.com) Bernie Walter
20" Kalamazoo #VS-20, 3-wheel, 5200 FPM, Ideal welder, 3 HP, very good  Camera Visit Dealer's Equipment Listings  rfq
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Email: Sales@normanmachinetool.com) Mike Norman
20.8" x 20.8" Behringer #HBP530A, fully auto, vert.bundle clamp, 2" blade, '07, #25668  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
20.8" x 24.8" Behringer #HBP530A, 2" blade, bundle clamping, auto, 10 HP, convr.'99, #9779  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
21.3" x 26.4" S-Smart #CM21-26, sgl miter, auto.col.type, hydraulic vise & blade tension, new  Camera rfq
Revolution Machine Tools Inc, Salt Lake City, UT 385-321-3934 (Email: kyle@rmtus.com) Kyle Jorgenson
22" x 24.5" Marvel #PA22, blade tension, hydraulic bar feed, blade guides, auto chip conv  rfq
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Email: Office@faheyinc.com) Jackie Fahey
24" x 22" Everising, auto, dual column, 2" blade, 10 HP, 60-300 SFPM, split front vise, '96  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
24" x 24" Amada #H600, post type, semi-auto, 2" blade, hydraulic vise, 10 HP, 1980, #17968  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
25" x 25" DoAll #C2525A, horiz.double column hvy duty fully auto., clnt sys, #A2649  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
25" x 25" DoAll #C650NC, twin posts, auto cycle, 2" blade, PLC, hydraulic vices, 10 hp, '05  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
25" x 25" Hem #H160M-DC, dual column, semi-auto, 2" blade, hydraulic vise, 15 HP, 1991, #18025  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
25" x 25" Hem #H160M-DC, 2" x 22' blade, power blade/brush, vari-speed, 1991, #25466  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
25" x 30" Hem #1500XL, 10 HP, 1-5/8" blade, 1984  rfq
G W Becker Inc, Hermitage, PA 724-983-1000 (Email: dmyetso@gwbcrane.com) Dave Yetso
25" x 30" Hem #F160, w/automatic tables, still set up  Camera rfq
American Steel Products Co, Toledo, OH 419-843-6051 (Email: ford@americansteel.com) Ford Cauffiel
25" x 30" Hem #F160LM-DC, semi-auto, 2°canted head, 2" blade, 10' powered conveyor, 1999  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
25" x 30" Hem #WF-160LM-DC, 15 HP blade motor, 5 HP hydraulic motor  Camera rfq
JPS International Inc, Santa Ana, CA 949-510-0479 (Email: pmj@jpsint.com) Peter M Janes Jr
25" x 36" W.F. Wells #B25-1, horizontal band saw, 75-400 FPM, 19'8" x 1-1/2" x .042" blade, roller conveyor, #16014  Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
25" x 40" W.F. Wells #B-25-II, 1.5" blade, 5 HP, 1980  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
25" x 44" Hem #WF-190M-DC, 15 HP saw motor, 5 HP hydraulic motor, 1997  Camera rfq
JPS International Inc, Santa Ana, CA 949-510-0479 (Email: pmj@jpsint.com) Peter M Janes Jr
25.5" x 25.5" Behringer #HBP-650A, 2.5" BW, dual column, auto.feed, PLC, 10 HP, '99  Camera Visit Dealer's Equipment Listings  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
25.5" x 25.5" DoAll #C-650NC, 2005, S34987  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Industrial Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionindustrial.com) Dept. Sales
Daito Twin Column Band Saw Model GTA-7010 CNC, Capacity 90 Degree 26" H x 40" W, 45 Degree 26" H X 23-5/8" W  rfq
JPS International Inc, Santa Ana, CA 949-510-0479 (Email: pmj@jpsint.com) Peter M Janes Jr
27" x 36" DoAll #CX3636, twin column, 2" blade, 2 bundle vises, chip conv, 30hp, clnt, '82  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
31" x 31" Kasto #PBA800, semi-automatic, 2.6" blade, 13 KW, 1994  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
31" x 31" Kasto #PBA800, semi-auto, 350" x 2.6" x 0.063" blade, 17.5 HP, 80M/min., 1994  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn
31.5" x 27.5" Amada #HA700A, auto stk feed, auto down feed, 10 HP, 2" blade, 1990  Camera Spec Sheet rfq
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.
31.5" x 47.2" Behringer #HBP800/1204, auto-cycle, 2.62" blade width, 15 HP, nesting, '02  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
32" x 32" DoAll dual-column #C-3232M, band saw, pedestal mounted control panel, infeed conveyor, outfeed conveyor, #27076  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
32" x 42" Hyd-Mech #S35P, miter horz semi-auto, 32" round, 32" x 22" rectangle at 60°  Camera Spec Sheet Show Video of Item rfq
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Email: Sales@normanmachinetool.com) Mike Norman
35" x 20" Hyd-Mech #M-20P, 10 HP, MTA-100 control  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
36" x 32" Hem #H3236M-DC, auto, 2" blade, 15 HP, 320 SFPM, exit roller table, vari-vise press  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
38" x 18" Peddinghaus structural steel HD saw, Promo-Cut measuring device, 1995  rfq
Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Email: indresinc1@aol.com) Ray Magaldi
40" x 40" Amada #H1080, 40" round, 2.5" blade, 56-213 FPM, 1998  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: brett@mmi-direct.com) Brett Fox
40" x 40" Amada #H1080, 32" round, 25.6" blade, 15 HP, fine feed roller, 1998, #26037  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
40" x 40" W.F. Wells, auto, 2-5/8" blade, 15 HP, hyd chip auger, 60-500 SFPM, CNC, 2008  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
41" x 41" Hyd-Mech #H40, 40" round, 3" blade, 20 HP, power.roller feed, hydraulic clamp, '99 #23891  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
41" x 49" Kasto #PBA1060/1260, semi-auto, twin col, 41" round, 3" blade, power.entry/exit conveyor   Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
44" x 40" Amada #H-1000, horizontal saw, #10313  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
Amada #HK-400, semi-automatic horizontal miter band saw, 1998  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Email: machinery@cnctool.com) John Roedel
Cosen #SH460, horiz. bandsaw, hydraulic lift, mitering, vari-speed, #2222  rfq
Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave
DoAll #C1216A, 12" x 15", 12" x 16", auto feed, 1990, #15597  Spec Sheet Visit Dealer's Equipment Listings  rfq
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia
DoAll #C-3300 Automatic, NC programmable horizontal saw w/UniOP controls, 13" round  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln
Johnson, Horizontal Band saw with no Model or Serial Number, #70003  Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Email: sales@fedequip.com) Joanne Parente
Laguna #LT-37, band saw, 24" resaw, 2" maximum blade, 36" thrt, 31" x 50" table, foot brake, 2012  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Email: sales@kdcapital.com) Sales Dept.
Marvel #13A2/S1/S2/S3, horizontal band saw, #64664  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
WB Type II Idler conveyors, 5' & 10', 32" between frames, 3.5" diameter rollers  Camera Spec Sheet rfq
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise