Browse:  Machinery Electrical
RSS Blog Surplus Record

LATHES, PRECISION & SECOND OPERATION (Also See Automatic Screw Machines & Chuckers)

 Sterling Machinery over 50 Years of Service
There are 64 listings in this category
File update: Thu, Dec 18, 2014 01:22
Advanced Search
Sort by:
Original Sort
Acer #1440G, toolroom lathe,14"swing over bed,21"swing in gap,9"SOCS,40"cc,in/mm Camera Visit Dealer's Equipment Listings  rfq
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
Feeler #FTL-618E, Hardinge Copy precision engine lathe, 11"x 18", 5C Collet Closer, 5C Collets, #A2579 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Feeler #FTL-618EM Series II, (Hardinge HLVH),11"x 18",in/mm,1.25"bore,'94 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
Feeler #FTS Series II, second operation turret lathe, 3500 RPM, #4893 Camera Visit Dealer's Equipment Listings  rfq
FH Machinery Inc, Ivyland, PA 215-355-6641 (Fax 215-355-6691) Harry G./ Ed K.
Feeler #FTS-27, 9" x 36", 1-1/16"spindle cap, 5C collet closer, tooling, 1993, #dk-17450 Camera rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury
Feeler #FTS27, double tool cross slide, 6 position turret, 1985, Tag #13795 rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
Feeler #FTS-27 Series II, second operation lathe,9"swing,vari-speed,5C collet closer,cross slide & turret,1980's,#145572 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Hammond 5-SDL, polishing & buffing, double end, 5 HP, 2200 RPM, Wheel Hoods, CDK-8 Duskollector, 2001 Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn
Hardinge #DSM59, turret, cross slide, Hardinge taper, 460 V., 1990 Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
Hardinge #DSM59, second op,9"x18",turret,cross slide,threaded spdl nose,3500 RPM,'88 Camera Spec Sheet rfq
Destiny Machinery Inc, Odessa, FL 727-376-2399 (Fax 727-372-8202) Dennis Laliberte
Hardinge #DSM59, 9"x18",turret,compound cross slide,dbl tool cross slide,chuck,'88 rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
Hardinge #DSM59, second operation lathe,9"swing,air actuated collet closer,vari-speed,tooling,1968,#152932 rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Hardinge #DSM-59R, dbl tool cross slide,6 pos.turret,5C taper,collet closure,vari-spd rfq
Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson
Hardinge #DV59, 9" x 17", variable speed to 3500 RPM, (2) In stock Camera rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury
Hardinge #DV59, 5C collet closer S/N DV59-10701 Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick
Hardinge #DV59, 9"x18"second operation lathe,X-Y compound slide,Collet closer,#6023 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #DV59, compound, tailstock, Hardinge taper, 460 V., 1993 Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
Hardinge #DV59, second operation turret lathe,pneumatic collet closer,tooling Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Fax 952-933-7229) J.Van Heuveln
Hardinge #DV59, precision engine lathe,9"sw,18"cc,vari-speed,Hardinge compound & tailstock,5C Collet,1984,#152902 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Hardinge #DV-59, precision engine lathe,9"swing,18"center,vari-speed,Hardinge compound & tailstock,5C-collet,1975,#152900 rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Hardinge #DV59, 9" x 18"Second Operation machine, serial #8345, #5410 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #DV-59, 9" x 18" Second Operation Lathe, Serial #8720, #6475 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #DV59, 2nd operation lathe, excellent condition, lots of tooling, 1966 Camera  Show Video of Item Visit Dealer's Equipment Listings  rfq
Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Chris Rohner
Hardinge #HC, chucker, 9" x 13", collet closer, #6399 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Hardinge #HC, electric carriage & cross slide feeds, 8 pos.turret, hi-lo tooling Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
Hardinge #HC, 9" x 13", chucking lathe, serial #HC-1415D, #6664 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #HC, chucker machine, 9"x 13", turret, 5C Collet Closer, #A1869 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Hardinge #HC, gang style,1-1/16"rnd 5C,3k RPM,V/S,Fagor 8025 CNC,Accuslide slide Camera Spec Sheet rfq
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn
Hardinge #HC, Super Precision Chucker, 9"x13",Coolant Sys,5C Collet,worklight,auto thrdg.attach,#A3304 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Hardinge #HC, Super Precision Chucker, 9"x13",brake motor,coolant sys,5C Collet,6" 3-Jaw chk,8 pos.tur.,#A3306 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Hardinge #HCT, chucker, automatic threading, Ser.HC-4645S, 1978 Camera rfq
Astra Tool Co Inc, Grapevine, TX 817-481-6528 (Fax 817-421-5960) David Austin
Hardinge #HLV-BK, high precision toolroom lathe, 11" x 18", Ser.#29234, #6278 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #HLV-BK, 11"x18", toolroom lathe, vari-speed, 5C collet, good, 1958 rfq
Astra Tool Co Inc, Grapevine, TX 817-481-6528 (Fax 817-421-5960) David Austin
Hardinge #HLV-EM, inch/metric,vari-speed,5-C collet closer,3-Jaw,1982,#151305 Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Hardinge #HLV-H, high precision toolroom lathe, 11"x 18", serial #3205, #6221 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #HLV-H, precision engine lathe,11"swing,18"cc,vari-speed,threads,5C-collet closer,1975,#153285 rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Hardinge #HLV-H, 11"sw,18"cc,3000rpm,1.5hp,4-Jaw,cllt closer,tlpst,clnt,trava-dial,'71 rfq
520 Machinery Sales LLC, Schaumburg, IL 888-520-1768 (Fax 630-855-3535) Everett Dahlberg
Hardinge #HLV-H, 11"x 18", sc collet closer, priced right, #33892 Camera rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Fax 818-788-2470) Sales Dept.
Hardinge #HLV-H, high precision toolroom lathe, 11"x 18", s/n #10084T, 1982, #6401 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #HLV-H, high precision toolroom lathe, serial #15072T, 1996, #6366 Camera Spec Sheet  Show Video of Item rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #HLV-H, DRO, 5C collet closer, 1973, #34033 Camera rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Fax 818-788-2470) Sales Dept.
Hardinge #HLV-H, toolroom, Acurite DRO,11"swing/bed,9"OCS,18"cc,inch threading,1981 Camera rfq
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.
Hardinge #HLVH, 11" x 18" High Precision Toolroom Lathe, Serial #1741, #6476 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Hardinge #HLV-H, Super Precision,Newall DRO,3&4 Jaw chk,collets,Aloris TP w/hldrs Camera rfq
Haider Machinery Inc, Eden Prairie, MN 952-975-4975 (Fax 952-975-4977) Gary Haider
Hardinge #HLV-H, 11"x 18", 1-1/4"spindle bore, 125-3000 RPM, inch threading Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Fax 909-348-5617) Dan Wheeler
Hardinge #HLV-H, precision tool room lathe,11"x 18",Anilam 2-Axis DRO,5"3-jaw chuck,lever 5C collet closer,coolant sys,#A2873 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Hardinge #HLV-H, 5C or threaded nose spdl,super precision,clnt,collet closer,Ser.#7176-S Camera Spec Sheet rfq
Iverson & Co Inc, Des Plaines, IL 847-299-2461 (Fax 847-827-5303) Terry Iverson
Hardinge #HLV-H, precision lathe,11"swing over bed,6"SOCS,18"cc,#2MT,5"3-jaw chuck,125-3000 RPM,1969,#11048 Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
Hardinge #HLVH-EM, 11"x18",in/mm,Sony DRO,Hardinge chk,Aloris TP,collet closer,'83 Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford
Hardinge #HLV-H-EM, precision toolroom lathe, 11"swing, 18"cc, 3-Jaw chuck, 1983, #14045 Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
Hardinge #HLV-H-EM, 11"swg,18"cc,3k RPM,in/mm,6"3-Jaw,5"4-Jaw,'80,JV-19972TK/CK Camera Spec Sheet rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury
Hardinge #HSL, speed lathe,9"x 10",X-Y compound slide,lever 5C closer,vari-speed control,#9247 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Hardinge #TFB, precision tool room lathe,11"x 18",collet holder,splash guard,KDK tool post,collets,work light,#A3026 Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
Harrison #10-AA, Precision toolroom lathe,11-1/4"swing o/bed,18"cc,in/mm,2-Axis DRO Camera Visit Dealer's Equipment Listings  rfq
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg
Monarch #10EE, precision engine lathe, 10" x 20", updated electrics & drive, Fagor DRO, 1963, #146923 Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt
Monarch #10EE, 12-1/2"x 20", 7-1/4"swing, 2500 RPM, Sony DRO, tailstock, taper Camera rfq
TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen
Monarch #10EE, 12.5"x20",in/mm threads,taper,DRO,1976,Solid State drive,2014 rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul/Marshall
Monarch #10EE, 12-1/2"x 30",2500 RPM,Tacom,1.5"spdl.hole,taper,Bijur mist,Ser.44628 rfq
Inter-Plant Sales, Hugo, MN 651-207-8203 (Fax 651-207-8933) Rick Canniff
Monarch #10EE, 12"x 20",taper attach,5 HP KB regenerative dr,carriage reground,'42 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards
Monarch #EE, 10"x20"cc,12-1/2"swg,4000 RPM,in/mm thread,taper attach.,1982,#37181 Camera Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn
Sharp #1118H, 11" x 18" High Precision Toolroom Lathe, Serial #CTL- 1134, #6478 Camera Spec Sheet rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
Sharp #1118H CNC precision tool room, 11"swg,9"turn dia,18"turn lgth,Anilam 4200T Camera Spec Sheet rfq
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 763-494-9827) Theron Horn
South Bend #14, 15"x 30" Tool Room Engine Lathe Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Scott / Mark
Victor #616, (Hardinge DV-59), vari-speed, turret, cross slide, 5"chuck, 1991 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax 847-276-2762) Peter Sonneborn

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record, Inc. All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise