Browse:  Machinery Electrical
RSS Blog Surplus Record

LATHES, ENGINE, OIL FIELD & HOLLOW SPINDLE

Machinery Dealers National Association-Used Metalworking
There are 90 listings in this category
File update: Wed, Aug 24, 2016 01:12
Advanced Search
Sort by Manufacturer
Sort by Location
Sort by Date Added
Original Sort
4" Wotan #B105M, table type, horizontal, #3673  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
16" x 25" Amada #H750HD, heavy duty, swivel bore, 1-1/2" blade, bundling, 5 HP, '86, #18264  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
24" x 72" LeBlond Regal, hollow spindle engine lathe, geared head, #7525  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
24" x 72" Makino-LeBlond, 9" hole, (2)chucks, inch/metric, 30 HP, 1996  rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
24" x 144" LeBlond Regal, 5-1/4" hole, 2-chucks, taper, rapid, nice, 1972  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
24" x 192" Lehmann, 12.15" spindle bore, #5MT, 4-jaw chucks, taper, S/R, 10-397 RPM, #16527  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
25" x 84" Kuraki #KHA, 4" hole, 2-chucks, taper, rapid, clean, 1980s  rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
25" x 118" Dean Smith & Grace #25P Oil Country, 10.5" hole, frt & rear chucks, '84, #23796  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
25" x 120" Dean Smith & Grace #25P, 10-7/8" spindle bore, fast thrding air kick out & taper  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Shamrock Machinery Co, Houston, TX 713-699-3355 (Email: sales@shamrockmachinery.com) Mike Richards
25" x 240" /96" Lodge & Shipley dual-side, 20" A1 spindle nose, 12-5/8" spindle hole, 6-338 RPM, 25 HP, #26965  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
26" x 72" Leblond Makino #29/9-HS Regal, 21" 3-Jaw chuck, #5 MT, 9" hole, inch/mm, 9-600 RPM, s/n #8-HS-151, 1985, #28980  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
26" x 80" Roughneck #HR-VS 26x80G, 6.1" spindle bore, 15 HP V/S 4 ranges, 11" S/R  Camera Spec Sheet PDF Visit Dealer's Equipment Listings  rfq
Shamrock Machinery Co, Houston, TX 713-699-3355 (Email: sales@shamrockmachinery.com) Mike Richards
26" x 118" Dean Smith & Grace #25P, 10.5" bore, 24" 4-jaw, 290 RPM, taper attachment  Spec Sheet rfq
HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling
26" x 144" LeBlond Makino Regal Servo Shift #24, 3&4-jaw chucks, taper attachment, coolant, 1200 RPM, #L3000142  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
26" x 192" LeBlond Regal, 5" spindle hole, 900 RPM, rapid travel, hardways, taper, tooling  Camera Visit Dealer's Equipment Listings  rfq
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson
26-1/2" x 96" Lodge & Shipley Power Turn #RXE2516, 9-1/4" hollow spindle, frnt/rear 21" 4-jaw  Spec Sheet rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
26.5" x 144" Lodge & Shipley #2516, (2) 4-Jaw chucks, S/R, DRO, s/n #49327, 1974, #3411  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein
27.5" x 120" Lehmann #2516, hollow spindle, 24" chuck, 8-308 RPM, 30 HP, #3350  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein
28" x 32" Amada #HFA700II, auto cycle, post type, 2" blade, PLC, 10 HP, 2002, #18276  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
28" x 96" /240" L & S #2516, triple carriage hollow spindle lathe, (2) 4-Jaw 24" chucks, #5910  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
28" /37-3/4" x 120" Lansing #28G, 9-1/4" bore, (2) 24" chucks, taper  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner
28" /37" x 120" Lansing #G-28, 9-1/4" hole, in/mm threading, D1-15 Camlock  Camera rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
28" x 10' Lehman, 9" spindel bore, thread std tapered thread  Camera rfq
FMI Trading LLC, Canutillo, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen
28" x 16' Lehman, 12" spindel bore, thread std tapered thread  Camera rfq
FMI Trading LLC, Canutillo, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen
28" x 192" Lodge & Shipley #2516, hollow spindle lathe, 21" SOCS, 30 HP, #62190  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
28" x 192" Lodge & Shipley #2516, hollow spindle oil field lathe, 3&4-Jaw chuck, 20HP, #6179  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
29" x 80" L & L #LA29X2000, 9" bore, 18" o/cross, 600 RPM, (2) 24" 4-jaw chucks, 30 HP, 2005  Camera Spec Sheet rfq
HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling
30" x 78" Mazak, 20-3/4" OCS, 12-19/32" bore, 24" chuck, taper, tailstock, in/mm threading  Camera Visit Dealer's Equipment Listings  rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
30" x 118" Kingston, 12-1/2" spindle bore, 4-jaw chucks, S/R, taper, 20 HP, 300 RPM, #16208  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
30" x 120" Kingston #HK3000, engine lathe, in/mm, taper, (2)24" 4-Jaw chucks, 1984, #150820  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
30" x 120" Kingston #HK3000, 12.5" bore, taper, (2) 24" chucks, 1984  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner
30" x 120" Kingston, 12.5" spindle bore, 5-300rpm, frt./rear chucks, stdy.rest, tpr att.20HP  Camera Visit Dealer's Equipment Listings  rfq
Machinery Acquisitions Int'l, Houston, TX 713-467-9081 (Email: ron@seemai.com) Ron Braman
30" x 10' Kuraki lathe, 4-jaw chuck, 10" spindle bore  Camera rfq
FMI Trading LLC, Canutillo, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen
30" x 120" Mazak, 12-1/2" hole, (2) 4 jaw chucks, taper, rapid, steady rest, 20 HP, 1982  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
32" x 60" Jones & Lamson #4515, CNC hollow spindlee.lathe, 12" chuck, chip conveyor, 20-1200 RPM, good, 1980' s, new GE Fanuc 0TC 1990' s  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
32" x 100" Broadbent, 16-1/4" hollow spindle, air kick out, taper, 4-jaw, 1975  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
32" x 100" Broadbent, 16.5" hole, taper, 1975  Camera Visit Dealer's Equipment Listings  rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
32" x 118" Kuraki #LC-403, hollow spindle, (2) 24" 4-Jaw f & r chuck, 1981 refurb 2015  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro
32" x 118" Mazak Slant Turn #50N, 12.6" bore, 24" chuck, V15 turret, Mazak 640T, 2002, #22727  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
32" x 120" Stanko #1A983-3, 12" hollow spindle lathe  Camera Spec Sheet rfq
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
32" x 124" Threadmaster (Bulgaria) #CT832, engine lathe, 12.2" spindle hole, auto.thrd, new  Camera rfq
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
32" x 129" Mazak #ST-50N/3000, 12.6" bore, 24" chuck, V15 turret, Mazak 640T, 2002, #22011  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
32" x 144" LeBlond Regal, 9" spindle hole, 400 RPM, hard ways, front/rear chucks, taper, tooling  Camera Visit Dealer's Equipment Listings  rfq
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Charlie Peterson
32" x 252" /120" Lodge & Shipley #3220 Superturn dual Side, 40 HP, 5-600 RPM, DRO, #26925, (2) available  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
32.5" x 22'/10' Lodge & Shipley #3220 Superturn W, hollow spindle dual bed lathe, #61320  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
32.5" x 21'/10' Lodge & Shipley Superturn, triple carriage hollow spindle, 40HP, '70, #5812  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
33" x 118" Binns & Berry Data #90-850 CNC, 14.5" bore, TP, frnt/rear chucks, F OT, #25785  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
33" x 120" Binns & Berry Trident #850, Oil Country lathe, 33" swing, 24" chuck, threading, '83  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.
34" x 80" Ikegai #AX40NB, CNC, 10" spindle bore, Fanuc 6T, 34" sw, 24" chuck, tailstock, conveyor, #16727  Camera rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
34" x 120" Gurutzpe Super RT, 10" hole, semi-auto thread, 4-Jaw chuck, T.A., 1983  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
35" x 80 " Haas #TL-4, CNC hollow spindle, 16" swing over C/S, 25" chucks, 10.8" bore, #16728  Camera rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
36" x 120" Demoor, hollow spindle lathe, 6" spindle hole, #5MT, SR, taper attach, #L410624  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
36" x 120" National #LAP32-20, hollow spindle, A-15 spindle nose, #6 MT, 1982, #L41074  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
36" x 120" Poreba #MT930-360/3M, 14" spindle bore, 2 steadys, (2) 4-jaw chucks, new  Visit Dealer's Equipment Listings  rfq
Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Email: sales@euromachinetool.com) Frank Turi
36" x 120" Poreba #TPL-90/3M, 24" SOCS, in/mm, (2)32" 4-Jaw chucks, 12-1/2" spindle bore, 1984  rfq
Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Email: sales@euromachinetool.com) Frank Turi
36" x 120" Poreba #TPL-90/3M, oil field hollow spindle, 28" &24" 4-Jaw chuck, taper att, #6372  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
36" x 120" Poreba #TPL-90/3M, hollow spindle, 28" 4-Jaw chuck, S/R, 5-250 RPM, #3412  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein
36" x 120" Poreba #TR2-93/14, 14" hollow spindle, inch/metric, new  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
36" x 120" Poreba, 12-1/2" hole, 4-jaw chuck, T.A., rapid, steady rest, 1986 (2 available)  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
36" x 120" Threadmaster #CT932, with 14" spindle hole  Camera Spec Sheet rfq
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
36" x 144" Lodge & Shipley, hollow spindle engine lathe, taper attach, (2) 4-jaw chucks  Camera rfq
Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Email: Tmi@argolink.net) Gary Laconis
36" x 160" Poreba #TR2-93/14, 14" hollow spindle, inch/metric, new  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
37" x 78" Dainichi #M95, Fanuc CNC, 8-pos.turret, 9" bore, #25836  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
38" x 80" Demoor #825S360, oil field hollow spindle, 28" 4-Jaw chuck, 31" 3-Jaw chuck, #6373  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
39" x 236" Pro K, Fanuc OiT, 12.5" bore, prog.tailstock, (2) 30" chucks, 2014, #24044  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
40" x 72" Lodge & Shipley Profiturn #40 3220-25, CNC hollow spindle lathe, A-B 9230 control retrofit 90' s, 28" SOCS, 600 RPM, 1980' s  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
40" x 118" Spark Oil Country, 14" hole, in/mm threading, 315 RPM, taper, 30 HP, new, #22712  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
40" x 118" Spark Oil Country, 11" hole, front/rear chucks, 315 RPM, taper, in/mm, '13, #22722  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
40" x 120" Kuraki #LC15-30, 15" spindle hole, 28" chuck, 6MT, steady rest, 30 HP, 300 RPM, 1984, #L410616  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
40" x 120" Titan, 10" hollow spindle, front/rear chucks, taper, in/mm, 1980, #1460  Camera Visit Dealer's Equipment Listings  rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Email: sales@wigglesworthmachinery.com) Gifford
40" x 236" Spark Oil Country, 14" hole, front/rear chucks, 315 RPM, taper, in/mm, new, #25317  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
40" x 236" Spark Oil Country, 11" hole, front/rear chucks, 315 RPM, taper, in/mm, '13, #22723  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
40" x 252" LeBlond #4025NK, 12.5" hole, taper attachment, #6MT, S/R, 1975, #153740  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
41" x 295" Binns & Berry Data #90-1000, Fagor 8025, 8.85" bore, (2)23" chucks, '97, #25745  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
41.74" x 120" Wafum #1060/3000 B21, CNC Oil country turn.center, 21" hole thru spindle  Camera Spec Sheet rfq
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
42" x 118" Takang lathe, 14" bore, 30" front/rear chucks, taper, threading, 2013, #22661  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
43" x 157" Okuma #LH55NBB, CNC, 9.5" hole, front & rear chucks, 1000 RPM, 60 HP, 1990  Camera Visit Dealer's Equipment Listings  rfq
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff
45" /60" x 62" Eisen #PA4560, Gap Bed, 6" hole, 2 shear bed, 30 HP, 2013  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
45.6" x 157" Hartford #SHA26-4000, 63" swing in gap, 12.1" bore, F&R chucks, auto threading  rfq
Hoppen-Webster Machinery Inc, East Peoria, IL 309-698-5564 (Email: sales@hoppenwebster.com) Ken Webster
47" x 118" Gurutzpe #A-1600 CNC, 14" bore, front & rear chucks, Fagor 8055, 2008, #25102  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
50" x 163" Takang #LD50x4150, heavy duty oil field CNC lathe, 12" bore, 2007  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Email: glenn@graymachinery.com) Glenn Gray
51" x 144" Lehmann Electrol #5035, 36" chucks, 16-1/8" spindle hole, #6MT, 500 RPM, S/R, 75 HP  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling
55" x 118" Femco #BL975/3000, Fanuc 0iTC, 12" hole, 40" F/R chucks, 60 HP, 2008, #25420  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
55" x 10' SMT #CNC-OCL635 x 3000, Flat Bed CNC Oil Country Lathe, 25" spindle hole  Camera Spec Sheet rfq
Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Email: sales@escohou.com) R.G. Escandon
59" x 118" Sculfort Supercap-Senior, hollow spindle lathe, 3-Jaw chuck  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Email: sales@euromachinetool.com) Frank Turi
66" x 120" Sculfort Supercap-Senior, 49" SOCS, in/mm, 3-jaw chuck, 2-Axis Heidenhain DRO, '78  rfq
Euro Machine Tool Co, Wauconda, IL 847-968-2000 (Email: sales@euromachinetool.com) Frank Turi
Tacchi, 2-Axis CNC lathes, 14.569" hole, 45" SOCS, Fanuc OTC, rbld '99, upgraded '11 (2 available)  Camera Spec Sheet rfq
Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave
Taiyo Seiki #KY-8035N, s/n #0-102, 27.5" X, 47" Z, 41" SOB, 28" chuck, 3-Jaw, 8-pos.turret, coolant, 53 HP  Visit Dealer's Equipment Listings  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
Warner & Swasey #SC-20-120, slant bed, 28" swing over bed, 21" swing over cross slide, 25" swing over carriage  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
Warner & Swasey #SC-32, slant bed, new Fanuc control, 36.50" swing over bed, 32.50" swing over carriage, 14.75" X cross slide travel  Visit Dealer's Equipment Listings  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise