Browse:  Machinery Electrical
RSS Blog Surplus Record

GRINDERS, SURFACE RECIPROCATING TABLE (Horizontal Spindle)

 For over 35 years a Leader in the Machine Tool Ind.
There are 398 listings in this category
File update: Mon, Jul 25, 2016 01:11
Advanced Search
Sort by:
Original Sort
4" x 8" Andritz #DSF1524, grinder, serial #1994-00019  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
5" x 10" Taft Pierce #1, surface grinder, roller bearing table, tilt wheelhead, chuck, 1955, #144877  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 10" Taft-Pierce #100, 1 HP, tilt spindle, metric execution, nice, 1986, #UD69600  Camera Spec Sheet rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
5" x 12" Taft Pierce #1, surface grinder, roller bearing table, tilt wheelhead, fine feeds, 1967, #150592  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 12" Taft Pierce #1, tilt wheelhead, high-precision hand feed, 13.5" long., 5.5" cross, s/n #2225, 1966, #149342  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 12" Taft-Pierce #1, manual feed, tilt wheelhead, roller slides, chuck, coolant, 1966  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
5" x 12" Taft-Pierce #100, manual, VS, mag.chuck, VS control, like new, 1970, Tag #13283  Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
6" x 12" Boyar-Schultz #612, manual feed, permanent chuck, Tag #13526  rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
6" x 12" Boyar-Schultz #612, Electro magnetic chuck w/control, auto lube system, worklight, used, #A3942 (2 available)  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6" x 12" Brown & Sharpe #2, magnetic chuck, good condition, #1322  Camera Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch
6" x 12" Brown & Sharpe #612 Valuemaster, EMC, roller bearing table, fine feeds, Sony 2- Axis DRO, 1984, #154147  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Brown & Sharpe #612 Valumaster, surface grinder, roller bearing table, PMC, 2 HP spindle, #152199  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Brown & Sharpe Micromaster, Fine Pole chuck, excellent  rfq
Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Email: irichlin@richlinmachinery.com) Irv Richlin
6" x 12" Chevalier Super #612, surface grinder, roller bearing slides, .000050" fine feeds, PMC, 1992, #149897  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Harig #612, hard chrome ways, Y-Axis DRO, 1 HP, cable drive, 1979, #9516  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6" x 12" Harig Super #612, hand feed surface grinder  Camera Visit Dealer's Equipment Listings  rfq
Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Email: machinery@cnctool.com) John Roedel
6" x 12" Harig #612, Acu-Rite 1-Axis DRO, Walker PMC, cable drive, 1 HP, serial #15899, 1985, #154465  Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Harig #612, hand feed, electric chuck, cable drive, 1.5 HP, 1991, #9983  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6" x 12" Harig #612, surface grinder, steel ways, DRO, 1-1/2 & 1 HP, Walker chucks (4 available)  Camera rfq
Jamestown Machinery Inc, Jamestown, PA 724-932-2674 (Email: john@jamestownmachinery.com) John Krygowski
6" x 12" Harig #612, hard ways, 8" x 1-1/4" x 1-1/4" wheel, 1 HP, cable drive, 1985, #9515  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6" x 12" Harig Super #612, hand feed, cable drive, Teflon on ways, Walker PMC, 1 HP, serial #11190, 1979, #154428  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Harig #612 Ballway, surface grinder, roller bearing table, EMC, wider base, serial #B15858, 1985, #152847  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Harig #612 Ballway, grinder, DRO, Permanent Mag Churck, 3450 RPM, 1 HP, #27882  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
6" x 12" Harig #612 Ballway, surface grinder, Acu-rite DRO, 1-1/2 HP, s/n #B20373, 1990  Camera rfq
Jamestown Machinery Inc, Jamestown, PA 724-932-2674 (Email: john@jamestownmachinery.com) John Krygowski
6" x 12" Harig, 13" long., 7" cross, mag.chuck, 7" x 1/2" x 1-1/4" whl, 3200 RPM, lube, #8025-23  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch
6" x 12" Harig, chrome ways, electric Walker magnetic chuck, digital readout, 1995  rfq
Advanced Processes & Tech, Calhoun City, MS 662-628-8150 (Email: lee@maxxsouth.net) Lee Harrelson
6" x 12" K.O. Lee #SE612, hand feed, Walker electric fine line chuck, 2 HP, 1992, #9654  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6" x 12" Mitsui #Hi-Tek, conventional grinder w/fine fd option, spindle & axes smooth, '86  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Email: mail@rohnermachinery.com) Chris Rohner
6" x 12" Mitsui #MSG-200MH, hand feed, bearing ways, electric chuck, 1983, #9976  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6" x 12" Mitsui #MSG-200MH, hand feeds, roller slides, chuck, 1984  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 12" Mitsui #MSG-200MH, hand feeds, roller slides, fine feeds.000050", chuck, 1990  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 12" Mitsui-Seiki #MSG-200MH, roller bearing table, 2X DRO, serial #89097040, 1990, #155199  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Powermatic #1270, permanent chuck, manual feed, Tag #13330  rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
6" x 12" Sin Tek #STP-612, 6" x 12" electro magnetic chuck w/control, one shot lube sys, #8880  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6" x 12" Taft-Pierce #1, tilt wheel surface grinder, tilting wheelhead, roller bearing table, EMC, 1963, #146997  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 12" Taft-Pierce model hand feed surface grinder  Camera Visit Dealer's Equipment Listings  rfq
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman
6" x 12" Webb #612, heavy duty, Permanent magnetic chuck, one shot lube system, used, #A4105  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6" x 14" Hangzhou #HZ-150, hand feed, 7" wheel, 12" under, 1 HP, Fine line PM chuck  rfq
WINN/DIXI Machine Tool Sales, Rockford, IL 815-874-4771 (Email: dickc@winndiximts.com) Dick Crosby
6" x 18" Acer Supra #618, surface grinder, 8" wheel, 2 HP, 1996  Camera Spec Sheet rfq
ASI Machine Tool, Richwood, KY 859-485-8370 (Email: debbie@asimachinetool.com) Debbie Parson
6" x 18" Acer Supra #618II, hand feeds, roller table, chuck, 2004  Camera Visit Dealer's Equipment Listings  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 18" Boyar-Schultz #2A, surface grinder, 1 HP, over the wheel dresser, 1975  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn
6" x 18" Boyar-Schultz #2A618, surface grinder, hydraulic long & corss feeds, heavy duty casst iron base, 1983, #153050  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe Micromaster II, hydraulic long feed, coolant, chuck, #11, 661  rfq
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Email: dave@niblockmachinery.com) David A. Bortner
6" x 18" Brown & Sharpe #618 Micromaster, surface grinder, hydraulic X-Y feeds, EMC, coolant, excellent, 1978, #148422  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Micromaster, surface grinder, hydraulic X-Y feeds, coolant, chuck, 1981, #150475  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Micromaster, surface grinder, hydraulic long.& cross feeds, 1964, #151536  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Micromaster, surface grinder, hydraulic table & cross feed, magnetic chuck, 1968, #151794  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Micromaster Series II, surface grinder, hydraulic long.& cross, EMC, coolant, fine feeds, exc., 1982, #148204  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Micromaster Series II, surface grinder, .0001" cross & vert., DRO, chuck, 1980, #141362  Camera rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Micromaster Series II, precision hydraulic table, 1980, #149112  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe #618 Valuemaster, surface grinder, roller bearing table, fine feeds .0001", 1986, #151261  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Brown & Sharpe Micromaster, 2x hydraulic feeds, power downfeed arrangement, chuck, '79  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 18" Brown & Sharpe Valumaster, hand fds, roller table, fine fds, '86, reblt. spindle '14  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 18" Chevalier Super #618, HF, 2 HP, 8" wheel, 1989  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
6" x 18" Chevalier #FSG-2A618, hydraulic surface grinder, #11747  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Chevalier #FSG-2A618, surface grinder, work light, Magnetic chuck, 1990  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross
6" x 18" Chevalier #FSG-618, mag. chuck, coolant, work light, manual  Camera rfq
Spier Machinery Corp, North Tonawanda, NY 716-694-4711 (Email: paul@spiermachinery.com) Paul Shear
6" x 18" Chevalier #FSG-618M, 19" table travel, O.S.Walker Fine Pole Electro Mag.chuck, 7" saddle, 1.25 HP, 1991, #15122  Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
6" x 18" Chevalier #FSG-618M, manual, Electro-Mag chuck, 7" wheel, very nice, 1996  Camera Spec Sheet rfq
Ted Grob Sales Inc, Grafton, WI 262-377-8220 (Email: ted@tedgrobsales.com) Ted Grob
6" x 18" Chevalier #FSG-618M, Magnetic chuck, 2 HP, 3450 RPM, serial #A3826032  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
6" x 18" Chevalier #FSG-618M, hand feed, Perm Mag Chuck, 3450 RPM, like new, 1998 (2) available  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
6" x 18" Clausing Equiptop, 3-Axis, auto surface grinder, hydraulic table feed, 2 HP, 460 V.  Camera Visit Dealer's Equipment Listings  rfq
Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster
6" x 18" Covel #10H, 7" wheel, 1 HP, 3450 RPM, Perm Mag Chuck, Acu-Rite DRO, excellent, (2) available, #TK-20499  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
6" x 18" Covel #15, surface grinder, Permanent Magnetic chuck, #A1302  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6" x 18" DoAll #DH-618, 2-Axis automatic horizontal surface grinder, 1 HP  Camera Spec Sheet Show Video of Item rfq
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton
6" x 18" DoAll, 2-Axis hydraulic, perm.mag.chuck, Parker spindle  Camera rfq
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
6" x 18" Eisen #618B, precision manual surface grinder, permanent magnetic chuck, work light, coolant system, 3600 RPM, #A3049  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6" x 18" Gallmeyer & Livingston #250, grinder, #11066  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Gardner, hand feeds, roller slides, 2x DRO, chuck, 1980  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 18" Harig Super #612, surface grinder, #3343  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
6" x 18" Harig Super #612, surface grinder, #3344  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
6" x 18" Harig #618, hand feed precision grinder, 7" x 1/2" x 1-1/4" whl, 1-1/2 HP, #8718  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Harig #618, EMC, Neutrofier, 20" long., 6.75" cross, hard tool ways, serial #6094-W, 1985, #154317  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Harig #618 Ballway surface grinder, 6" x 18" chuck, #11614  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Harig #618A, 2-Axis auto., O.S. Walker F.P.Perm.Mag.chuck, excellent, 1988  Camera Spec Sheet rfq
American Machinery Liquidators, East Brunswick, NJ 732-390-0006 (Email: sales@americanmachinery.com) Marc Gallanter
6" x 18" Harig #618CNC, surface grinder  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
6" x 18" Harig #618S, 2-Axis automatic, 1.5 HP, Walker chuck, coolant, excellent, 1988  Camera rfq
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave
6" x 18" Harig, auto surface grinder, 1 HP, auto chuck, coolant, auto power cross feed  Camera rfq
520 Machinery Sales LLC, Schaumburg, IL 888-520-1768 (Email: everett@520machinery.com) Everett Dahlberg
6" x 18" Jones & Shipman #540, roller bearing table, Walker EMC, hand feeds, 2 HP, U/P, excellent, 1995, #154459  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Jones & Shipman #540, Sony DRO, sine chuck, power elev.power ball table, excellent, s/n #BO-15558, 1995, #154512  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Jones & Shipman #540H, optidress & PG 620 visual grind system, '02, #154788  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" KBC #SG618-HD, surface grinder  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
6" x 18" Landis, hand feed, 10" wheel, chuck, #11, 663  rfq
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Email: dave@niblockmachinery.com) David A. Bortner
6" x 18" Mitsui #MSG-205MH, hand feeds, roller slides, 2x DRO, Electromagnetic chuck, 2001  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
6" x 18" Nantong #M618, HF, EMC, 1.1 KW, never used, low price  Camera rfq
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
6" x 18" Okamoto #ACC-618-DX3, good, 1998  rfq
Badger Machine & Equipment, Milwaukee, WI 414-405-4103 (Email: badgermach1@aol.com) Gary Hohl
6" x 18" Okamoto #ACC-618-DX3, auto IDF, 3X auto feeds, EMC, coolant, 2 HP, excellent, s/n #45271, 1998, #154808  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Okamoto #ACC-618-DXII, auto cross feed, DRO, Walker chuck, 8" wheel, 2005 (2 available)  Camera Spec Sheet rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Email: sales@usedmachinerysales.com) Spencer Minns
6" x 18" Okamoto #PFG-450, 1 HP, fine feed on down, Walker chuck, 1978  Camera Spec Sheet rfq
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave
6" x 18" Okamoto #PFG-450C, 8000 SFPM, 1988  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
6" x 18" Parker Majestic #2, surface grinder, s/n #1035SC-57, B & S Micro Mest mag.chk  Camera Visit Dealer's Equipment Listings  rfq
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman
6" x 18" Parker Majestic #2, surface grinder, Optidress Mircoscope wheel dresser, 1976, #8661  Camera Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
6" x 18" Parker Majestic #2Z, 18" x 6" long, 18" long.travel, grinder, 1983, #16398  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
6" x 18" Parker Majestic #2Z, 7" x 5/8" x 1-1/4" wheel, 1988, #16396  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
6" x 18" Parker Majestic #2Z, 6" x 18" EMC, DRO, power spindle elevation, #5085  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
6" x 18" Parker Majestic #2Z, variable spindle, DRO, 1996 (2 available)  rfq
Allied Machinery Co, Warren, MI 586-754-9200 (Email: tedjr@alliedmachinery.com) Ted Barrie
6" x 18" Parker Majestic #2Z, chuck w/control, power elev., excellent, rebuilt by PM 2008  Camera rfq
Seminole Machinery Company, Shelby Township, MI 586-465-9700 (Email: danny@seminolemachinery.com) Dan Patrona
6" x 18" Parker Majestic #2Z, surface grinder, #9740  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Parker Majestic #2Z, power elevation, EMC, (5) machines to choose from, 1981  Camera Spec Sheet rfq
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Email: sales@equipmenttrading.com) Don Paul
6" x 18" Parker Majestic #2Z, super precision hand feed grinder, power elev., all 3 handwheels @ hip level, 1985, #151688  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Parker Majestic #2Z, surface grinder, #9690  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Parker Majestic #2Z, Electro.Mag.chuck, 3x DRO, power elevation, serial #5727 ZV 91, 1991, #154513  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Parker Majestic #2Z, Super Precision, hand feed, Acu-Rite DRO, power elevation, 1.5 HP, 1988, #152019  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Parker Majestic surface grinder, #9025  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Parker Majestic, 3-Axis surface grinder, 20" vert. axis, 6200 rpm, 1993  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
International Machine, Inc., Orion Township, MI 248-845-2140 (Email: leads@internationalmachine.net) Tim Mack
6" x 18" Reid #618, hydraulic surface grinder, hydraulic X-Y feeds, PMC, serial #30110FC, 1988, #150696  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Reid #618, precision surface grinder, 7" cross travel, 20" longitudal travel, #5598  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
FH Machinery Inc, Ivyland, PA 215-355-6641 (Email: harry@fhmachinery.com) Harry G./ Ed K.
6" x 18" Reid #618-HA, hand feed surface grinder, serial #14901  Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
6" x 18" Reid #618-HD, surface grinder, Walker Ceramax 6 x 16" mag.chuck, 1982, #148603  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Reid #618-HR, surface grinder, one shot lube, 6" x 18" perm.magnetic chuck, 1974, #148492  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Reid / Rollerway #618HR, no chuck, 1 HP, serial #18702  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
6" x 18" Reid #618HYD, Walker mag.chuck, 2-Axis hydraulic, 1.5 HP, coolant, 1980, #37353  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
6" x 18" Reid #1003, Rollerway grinder, #9757  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
6" x 18" Sharp, .0001", auto downfeed, absolutely new condition, fine pole  Camera rfq
Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Email: irichlin@richlinmachinery.com) Irv Richlin
6" x 18" Supertec #STP-618M, surface grinder, PMC, #152558  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
6" x 18" Thompson, 3-Axis automatic, runs good  rfq
Advanced Processes & Tech, Calhoun City, MS 662-628-8150 (Email: lee@maxxsouth.net) Lee Harrelson
6" x 18" Vectrax #JL618M, 7" wheel, vise, adj.downfeed, dresser, light, 2 HP, 2000  Camera Spec Sheet rfq
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
6-3/4" x 12-3/4" Harig #612, hand surface grinder, #10771  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8" x 12" Gallmeyer & Livingston #35, hydraulic table feeds X & Y, manual downfeed, 1" x 10" whl  Camera Spec Sheet rfq
Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Email: bill@gahrmachine.com) Bill Rhea
8" x 15" Bridgeport #815, rare conventional surface grinder, smooth spindle, exc., 1973  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Email: mail@rohnermachinery.com) Chris Rohner
8" x 15" Harvel, hand feed surface grinder, 12" wheel, 8" x 15" perm chuck, coolant system  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Holt Equipment, Annandale, MN 952-938-2202 (Email: genesis@skypoint.com) Wayne Mader
8" x 18" Blohm #818P, hydraulic table, power cross feed, chuck, coolant, serial #10793, 1975, #152425  Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Boyar Schultz #2A818 Husk-E-Line, electro-mag chuck, power spindle elevation, 70 FPM, 1HP, #27883  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
8" x 18" Boyar-Schultz #3A818 Husk-E-Line, surface grinder, auto IDF, 3X auto feeds, power rapids, 1982, #151557  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Boyar-Schultz #FSC2A2, 2-Axis, hydraulic, 1-1/2 HP, 8x18 Mag.chuck, 8" wheel  Camera rfq
Blackhawk Industrial Sales, Repton, AL 251-862-2488 (Email: bhinsa@hughes.net) Dempsey Levins
8" x 18" Brown & Sharpe #818, hydraulic surface grinder, 2 HP, coolant, 1977  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
8" x 18" Brown & Sharpe #818 Micromaster, surface grinder  Camera Spec Sheet rfq
Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Email: sales@automatics.com) Steve Beck
8" x 18" Brown & Sharpe Micromaster, 2X hydraulic feeds, power.downfeed arrangement, chuck, '78  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
8" x 18" Chevalier Falcon #FSG 3A 818", automatic hydraulic surface grinder, 1994  Camera Spec Sheet Show Video of Item rfq
R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce
8" x 18" Chevalier #FSG-2A818, automatic surface grinder, 2 HP, 8" x.50" grinding wheel, coolant, over the wheel dresser, #G802536  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
8" x 18" Chevalier #FSG-3A818, precision hydraulic surface grinder  rfq
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
8" x 18" Chevalier #FSG-3A818, hydraulic, chuck, complete, excellent, 1997  rfq
Saunders Machinery Co, Mundelein, IL 847-949-4117 (Email: saundersmachinery@gmail.com) Mitch Saunders
8" x 18" Chevalier #FSG-3A818, Electro-Mag chuck, 2-Axis hyd  Camera Spec Sheet rfq
Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Email: sales@automatics.com) Steve Beck
8" x 18" Chevalier #FSG-818AD, 3-Axis, hydraulic, 8" whl, 2 HP, Perm Mag chuck, 1988, TK-20076  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
8" x 18" Chevalier Accugrind #Super-818 Precision 6" x 18" Fine Pole, clnt, auto lube, exc  Camera Visit Dealer's Equipment Listings  rfq
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Email: Sales@normanmachinetool.com) Mike Norman
8" x 18" Chevalier, Grinder  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
8" x 18" Clausing #CSG2A-818, hydraulic, 8" wheel, Fine Line chuck, coolant, 2 HP, '00, #9918  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8" x 18" Clausing #CSG-818, hand, 8" diameter wheel, chuck, 19" grind.length, 9-3/8" grind.width, 2 HP, excellent, 1997, #28754  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
8" x 18" Gallmeyer & Livingston #260, hydraulic, incr.downfeed, coolant, 1969, #5652  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8" x 18" Gallmeyer & Livingston #260, surface grinder, auto idf, 3x auto feeds, 10" wheel, EMC, coolant, 1973, #149878  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Gallmeyer & Livingston #260, hydraulic, Walker Fine Line, 2 HP, 1983, #9866  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8" x 18" Mitsui #MSG-250MH, Walker Fine Line EM chuck, 1-1/3 HP, 1991, #9982  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8" x 18" Mitsui-Seiki #MSG-250H-2A, auto IDF, 3x auto feeds, serial #78121481, 1978, #154916  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Mitsui-Seiki #MSG-250H-2AH, surface grinder, Walker EMC, auto inccemental downfeed, 1980, #153292  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Mitsui-Seiki #MSG-250-MH, roller bearing table, 2-Axis DRO, coolant & dry grinding, s/n #89055305, 1989, #154464  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Mitsui-Seiki #MSG-250-MH, roller bearing table, OS Walker EMC, serial #91125644, 1991, #155078  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 18" Parker Majestic, 3-Axis, 5 HP spindle, coolant w/filter, 1995  Camera Visit Dealer's Equipment Listings  rfq
Solomon Machinery, Eastpointe, MI 586-774-2030 (Email: russ@solomonmachinery.com) Russ Solomon
8" x 18" Vectrax #JL-3A818, automatic, 2 HP, 7" wheel, 80 FPM, wheel dresser, coolant w/Mag sep, like new, 2000, #TK-20190  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
8" x 20" Nicco, grinder w/automatic incremental downfeed  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers
8" x 20" Okamoto #820N, hydraulic surface grinder, auto IDF, 3x auto feeds, EMC, coolant, 1988, #152208  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 20" Okamoto #820N, 3-Axis automatic surface grinder, 1982, #10813  Camera Spec Sheet rfq
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave
8" x 20" Okamoto #ACC-820-DX, 8" whl, 25.6" long, 9" cr, I-82 IPM feed, 1800 RPM, #80117  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
8" x 20" Okamoto #ACC-820-DX, 1" x 8" wheel, 2 HP, mag.chuck, DX2 control, 1996  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar
8" x 20" Okamoto #ACC-820-DX, electro mag.chuck, 8" wheel, DX2, rough, finish, 2 HP, '96  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Email: sales@usedmachinerysales.com) Spencer Minns
8" x 20" Okamoto #ACC-8-20ST, 3-Axis hydraulic incremental downfeed, coolant, #40058  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
8" x 24" Brown & Sharpe #5, surface grinder, 3 T-slots, 9/16" width of slots, #4896  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
FH Machinery Inc, Ivyland, PA 215-355-6641 (Email: harry@fhmachinery.com) Harry G./ Ed K.
8" x 24" Brown & Sharpe #824 Dial-A-Size, IDF, hydraulic dresser, elec.chuck, 1983, #9111  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8" x 24" Brown & Sharpe #824 Techmaster, surface grinder, #64665  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
8" x 24" Brown & Sharpe Micromaster, hydraulic, electromagnetic chuck, coolant system  Camera Spec Sheet rfq
Kays Engineering Inc, Marshall, MO 660-886-9929 (Email: matt.kays@kays-dehoff.com) Matthew Kays
8" x 24" Brown & Sharpe Micromaster, hydraulic, EMC, coolant system, 12" wheel diameter   Camera rfq
Blackhawk Industrial Sales, Repton, AL 251-862-2488 (Email: bhinsa@hughes.net) Dempsey Levins
8" x 24" Brown & Sharpe Micromaster, incre.PDF, dresser, clnt, chuck & rect., '77, #15158  Camera rfq
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
8" x 24" Brown & Sharpe, fully automatic surface grinder  rfq
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
8" x 24" Brown & Sharpe Dial-A-Size, IDF, OTW dresser & compensation, 14" x 1.5" whl, '81  Camera Visit Dealer's Equipment Listings  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
8" x 24" DoAll #D824-12, 11" under wheel, 8" x 24" Mag chuck, 5 HP, #24273  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
8" x 24" DoAll, hydraulic, 13" vert., 3450 RPM, 8" x .5" x 1.25", overhead dresser, 1982  rfq
Johnston Industrial Sales Co., Cleveland, OH 216-381-7701 (Email: johnstonind@earthlink.net) C. Johnston
8" x 24" Gallmeyer & Livingston #35, hydraulic, 8.5" x 24" Perm Mag Chuck, wheel to 10" x 1"   Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
8" x 24" Gallmeyer & Livingston #280, surface grinder, #11595  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8" x 24" Gallmeyer & Livingston #350, hydraulic, power elevation, electric chuck, '67, #9787  Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8" x 24" Gallmeyer & Livingston #360, surface grinder, 8" x 24" chuck, #1812  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8" x 24" Jotes #SPC20B, surface grinder, horizontal spindle, 1985, #G80255  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
8" x 24" Okamoto #PSG-6EA, s/n #9405, 8" x 24" cap, 13.7" u/whl, o/whl dresser, #50497  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
8" x 24" Reid #824, hydraulic surface grinder, hydraulic X-Y feeds, EMC, DRO, coolant, 1993, #151863  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 24" Thompson #2F, horizontal surface grinder, #5826  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8" x 24" Thompson #2F, heavy duty precision hydraulic surface grinder, auto.IDF, 3x auto feeds, EMC, dresser, coolant, 1981, #153194  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
8" x 24" Thompson #2F, mag.chuck, 12" x 1" x 3" wheel, 29" traverse, 9" cross, 5-75 FPM, #2584  Camera Visit Dealer's Equipment Listings  rfq
Jorgenson Machine Tools, Salt Lake City, UT 801-493-0151 (Email: bud@jmtusa.com) Bud Jorgenson
8" x 24" Thompson #B, 2-Axis with chuck, serial #B901M  Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
8" x 24" Thompson, 1.5 HP, serial #2-521661  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
9" x 72" Thompson #4EM, 7" x 48" EMC, T-slot bed, 7" x 1" whl, 1.5 HP, swivel/tilt hd, '70, #2742  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) W Robert O'Neal
10" x 15" Abrasive #1-1/2, 10" x 15" Electromag chuck, 2" wheel, 1957, #2810  Camera Spec Sheet rfq
Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Email: bill@gahrmachine.com) Bill Rhea
10" x 15" Landis #1-1/2, abrasive, coolant pump & tank, magnetic chuck, 1961, #13546  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
10" x 16" Covel #17-H, 1/2 HP hydraulic motor, 2 HP, cartridge type spindle, motor, magnetic chuck  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
10" x 18" Elb #SW4/5VA1-2, power.rapid trav., mag.chuck, dresser, clnt.tank & pump, '74, #71794  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
10" x 19.69" Chevalier #FSG-3A1020, surface grinder, 12" x 1" x 1-1/4" wheel, 2050 RPM, coolant, rapid traverse, very good, #G802513  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
10" x 20" Acer #AGS-1020AHD, hydraulic, incremental dwnfeed, coolant, 2 HP, 8" GW, '89  Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
10" x 20" Acer #AGS-1020AHD, IDF, hydraulic unit, 3580 RPM, coolant system, 2 HP, clean, s/n #953339037, 1995, #29310  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
10" x 20" Acer #AGS-1020AHD, auto downfeed, 8" wheel, 3500 RPM, coolant, perm mag chuck, excellent, 1998, #ck-20425  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
10" x 20" Chevalier #FSG-1020ADII, precision surface grinder, auto IDF, 3x auto feeds, EMC, coolant, 2000, #155100  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 20" Chevalier #FSG-3A1020, hydraulic surface grinder, Incremental downfeed  Camera Visit Dealer's Equipment Listings  rfq
Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Email: machinery@cnctool.com) John Roedel
10" x 20" Elb Star #1020 VAII, suface grinder, auto IDF, 3x auto feeds, EMC, coolant, 1980, #152052  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 20" Kent USA #SGS-1020AH, 19.7" x 9.1" table, 8" wheel, coolant, 2 HP, 1991, #9968  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10" x 20" Kent #SGS-1020AHD, auto down feed, 19.7" x 9.1" table, 8" wheel, 2 HP, '91, #9846  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10" x 20" Mitek #MT-1020ASD, 5" wheel, #3347  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
10" x 20" Proth #PSG-2550AH, surface grinder  rfq
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
10" x 24" Gallmeyer & Livingston #350, hydraulic surface grinder, #11303  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
10" x 24" Gallmeyer & Livingston #360, 12" wheel, 3 HP, power elev., EMC, clnt, 1970, #9742  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
10" x 24" Grand Rapids #360, surface grinder, #10924  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
10" x 24" Jakobsen #30, serial #EF1019  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
10" x 24" Jakobsen #SJ30, magnetic chuck, incre.downfeed, hydraulic OWD, coolant, #14918  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
10" x 24" K.O. Lee #S1024P, electro mag chuck, hydraulic surface grinder, #4046  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
10" x 24" Thompson, rebuilt, spindle, rescraped slides, excellent, 1970  Camera rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
10" x 30" B & S #1030 Micromaster, 14" whl, clnt, EMC, fine fds, power.elev, 5 HP, '83, #146767  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 30" B & S #1030 Micromaster, hydraulic X-Y Axis, fine feeds, EMC, clnt, '83, #146768  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 30" Brown & Sharpe Micromaster, hydraulic feeds, 5 HP, ElectroMag chuck, coolant, 1970  Camera Spec Sheet rfq
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Email: sales@equipmenttrading.com) Don Paul
10" x 30" DoAll #D1030-14, 12" grinding wheel, 5 HP, 1750 RPM, serial #230-66137  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
10" x 30" Gallmeyer & Livingston #380, hydraulic surface grinder, #11698  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
10" x 30" Jakobsen #SJ16, 3-Axis, over wheel dresser, clnt, fine pole chuck, s/n #HI-1021  Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
10" x 30" Thompson #2FE732985, 1150 RPM, 7.5 HP, electromag.chuck, coolant, serial #100782, 1960' s  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
10" x 32" DoAll #D10-4, serial #169-63128  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
10" x 40" Thompson #3B, 1750 RPM, 5 HP, electromag.chuck, coolant, serial #3B93619, 1960' s  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
11" x 39" Stefor #1000, surface grinder, 10" x 30" Magmalock mag. table, 12" rotary whl, clnt  Camera Visit Dealer's Equipment Listings  rfq
Gold Machinery Group, Pawtucket, RI 800-619-4653 (Email: greg@goldmachinery.com) Gregory Erickson
11.8" x 23.6" Danobat #TOP-63, Fanuc Powermate 0, filtration, splash guards, '03, #25540  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
12" x 24" Acer #AGS1224AHD, 3-Axis auto, coolant, overhead dresser, 12/1996  Camera rfq
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Email: sales@hollandmachinery.net) Sales
12" x 24" Amada Wasino #SGE-63A, serial #13-001  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
12" x 24" AMW #GSG1224BH, automatic, coolant tank, pump, incremental downfeed, wheel dresser, serial #960419-02, #BX813  Camera Visit Dealer's Equipment Listings  rfq
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand
12" x 24" Blohm Precimat #306, Fanuc 210i, ball screws, filtrat, mist collect, '06, #25187  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
12" x 24" Blohm Precimat #306, Fanuc 210, ball screws filrat, mist collect, 2006  rfq
WI Equipment Corp, Bay Shore, NY 631-666-6642 (Email: Metals@wieqcorp.com) Steven Bankin
12" x 24" B & S Micrometer, incremental & power feeds, surface slotting, fine line chuck  Camera Visit Dealer's Equipment Listings  rfq
Seminole Machinery Company, Shelby Township, MI 586-465-9700 (Email: danny@seminolemachinery.com) Dan Patrona
12" x 24" Chevalier #3A-1224II, 5 HP, 1750RPM, auto lube, hydraulic, electro mag chuck, '99  Camera PDF rfq
520 Machinery Sales LLC, Schaumburg, IL 888-520-1768 (Email: everett@520machinery.com) Everett Dahlberg
12" x 24" Chevalier #FSG-3A, 14" wheel, Micro DF, 27.5" x 14.5" table, DRO, 5 HP, 2012  Camera Spec Sheet rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Email: sales@usedmachinerysales.com) Spencer Minns
12" x 24" Chevalier #FSG-1224AD, incr.downfeed, 12" x 24" chuck, DRO, bal stand & arbor, #15980  Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 24" Chevalier #FSG-1224AD, auto IDF, 3x auto feeds, EMC, coolant, 5 HP, serial #F173C004, 1990, #154946  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 24" Chevalier #FSG-1224AD, hydraulic, Sony DRO, auto cycle, clnt, crossfeed, incr.downfd.  rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
12" x 24" Chevalier #FSG-1224H, 3-Axis fully auto, 12" wheel, EMC, coolant, v/nice, 2009  Camera rfq
Ted Grob Sales Inc, Grafton, WI 262-377-8220 (Email: ted@tedgrobsales.com) Ted Grob
12" x 24" Clausing Equiptop #CSG-1224ASDII, hydraulic, 12" x 24" chuck, 5 HP, #11697  Camera Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12" x 24" Elb Perfekt #6ND, auto incr.dwnfd, prog.overhd.whl.dresser, 1990, #152326  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 24" Elb #SWN6/45VAI-Z, hydraulic surface grinder  Camera Visit Dealer's Equipment Listings  rfq
Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Email: machinery@cnctool.com) John Roedel
12" x 24" Gallmeyer & Livingston #450, OS Walker chuck control, 2 axis DRO, spindle VS dr.  Camera rfq
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
12" x 24" G & L #373, Inteloc chuck, dresser, coolant, power elev., serial #373381, mint  Camera rfq
Alenco Tool Supply, Chicago, IL 773-725-5700 (Email: sales@alencotool.com) Paul Braeseke
12" x 24" Grand Rapids #370, hydraulic surface grinder, #9569  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12" x 24" Grand Rapids #450, 12" x 24" Magnetic chuck, 30" x 14" table, 14" cross travel  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
12" x 24" Jones & Shipman #1430LAR, 3-Axis surface grinder, 1991, #15213  Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
12" x 24" Kent #KGS-63AHD, hydraulic, 3-Axis automatic, OTW dresser, DRO, coolant, '97  Camera rfq
AMTAC Corp, Erie, PA 814-838-4629 (Email: russtaccone@gmail.com) Russ Taccone,Jr.
12" x 24" Kent #KGS-306AHD, hydraulic surface grinder, auto IDF, 3X auto feeds, EMC, OTW dresser, coolant, 1987, #153977  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 24" Kent #KGS-306AHD, hydraulic, auto downfeed, dresser, coolant, 1989, #18183  Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 24" Nicco #NSG-6H, 3-Axis, 12" wheel, 5 HP dust-suction coolant, #11, 669  rfq
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Email: dave@niblockmachinery.com) David A. Bortner
12" x 24" Okamoto #124, surface grinder, chuck controls, auto incremental PDF, 1978, #26545  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
12" x 24" Okamoto Accugar #124DX, 6500 SFPM, DX4B control, 12" x 2" x 5" wheel  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp
12" x 24" Okamoto #124N, surface grinder, serial #7069  Camera rfq
Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Email: scott@alternativemachinetool.com) Scott Buth
12" x 24" Okamoto #124N Accugar, precision surface grinder, s/n #7734, 1990, #1703  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan
12" x 24" Okamoto #ACC/12-24DX, auto cycle, mag.chuck, coolant, 5 HP, 1998, #18103  Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 24" Okamoto #ACC/1224ST, hydraulic, incr.dwnfd., mag.chuck, dresser, clnt, 5 HP, 1998  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 24" Okamoto #ACC-12.24ST, surface grinder, #8806  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12" x 24" Okamoto #ACC-12.24ST, incremental downfeed, 1996  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
12" x 24" Okamoto #ACC-1224DX, IDF, sparkout, rgh/fine feeds, rapid vert, 12" whl, '98  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Email: sales@usedmachinerysales.com) Spencer Minns
12" x 24" Okamoto #ACC-1224DX, auto IDF, 3x auto feeds, clnt, s/n #65315, '08, #155245  Camera Spec Sheet rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 24" Okamoto #ACC-1224DX, 3-Axis hydraulic surface grinder, 12" x 1.5" x 5" wheel, EMC, 5 HP, #16034  Camera Spec Sheet rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
12" x 24" Okamoto #ACC-1224DX, 3-Axis, 5 HP, incremental downfeed, coolant, 2001  Visit Dealer's Equipment Listings  rfq
Tom Hale Equipment Co. Inc, Pensacola, FL 850-479-1293 (Email: tomhaleequipment@gmail.com) Tom Hale
12" x 24" Okamoto #ACC-1224DX NC, Fanuc, mag.chuck, coolant, 5 HP, 1997, #18215  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
12" x 24" Okamoto #ACC-1224DX2, fully auto, e-stop, rapid downfeed, clnt, '92, #A3121  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
12" x 24" Okamoto #ACC-124N, 29.5" long.tvl, 13.6" cr.tvl, auto feed, surface grinder, #81835  Camera Spec Sheet rfq
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
12" x 24" Okamoto #Accugar 124, surface grinder, 1978  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
12" x 24" Okamoto #Accugar 124N, IDF, CP&T, #8310  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
12" x 24" Okamoto #Accugar 124N, incr.downfeed, elect.chuck, 5 HP, 1984, #9930  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
12" x 24" Okamoto #Accugar 124N, 3-Axis, 1800 RPM, 1981  Camera Spec Sheet rfq
Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Email: sales@automatics.com) Steve Beck
12" x 24" Okamoto, loaded, pictures and video  rfq
Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Email: irichlin@richlinmachinery.com) Irv Richlin
12" x 24" Regent #SGS-1224AHD, auto IDF, 14" whl, clnt, EMC, 3x auto fds, '84, #146889  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 24" Sharp #SH-1224, Fine Line chuck, dust collect, program downfd, 3 HP, '00, #9854  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
12" x 24" Sunny #SGS-1224AHD, surface grinder, 16-82 FPM, power elevation, EMC, #65617  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
12" x 24" Supertec #1224NC, 3-Axis, auto, 7.5 HP, 14" x 2" x 5" whl, Mits PLC, '07, #CK-19867  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
12" x 24" Supertec #STP1428-AD, 3-Axis hydraulic, incr.downfeed, coolant, dust, 1998  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
12" x 24" Supertec #STP-1428AD, 3-Axis, 28" long., 14" cross, 12" wheel, elect.chuck, 3 HP, 1990, #23203  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
12" x 24" Thompson / NTC #FSH-30/60, 1985, S34866  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
12" x 24" Ziersch & Baltrusch #FS-3060, prog.auto IDF, 3X auto, 1990, #153769  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 28" Chevalier #FSG-1228AD, 12" x 28" EMC, auto, IDF, parallel dress, 5 HP, #6943P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
12" x 36" Blohm Hanseat #9, Electro Magnetic Chuck, 300mm wheel, s/n #11853, 1979  Camera Visit Dealer's Equipment Listings  rfq
Equipment Hub, Stone Mountain, GA 770-621-0495 (Email: sales@theequipmenthub.com) Mark Davis
12" x 36" Brown & Sharpe #1236 Micromaster, auto IDF, 3X auto fds, EMC, clnt, '68, #150839  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 36" Brown & Sharpe #1236 Micromaster, hydraulic, auto  Camera rfq
Holland Machinery Company Inc, Miami, FL 305-635-2325 (Email: sales@hollandmachinery.net) Sales
12" x 36" Brown & Sharpe Micromaster, 3-Axis, incre.downfeed, 12" wheel diameter, clnt, '78  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
12" x 36" Elb #SWN10VAI, 51" long., 14" hydraulic cross, coolant, fully automatic, 1977  Camera Spec Sheet rfq
ASI Machine Tool, Richwood, KY 859-485-8370 (Email: debbie@asimachinetool.com) Debbie Parson
12" x 36" Gallmeyer & Livingston #55, manual down, nice, Tag #13604  Camera rfq
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
12" x 36" Gallmeyer & Livingston #55, 2-Axis hydraulic feed, Electromagnetic chuck  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln
12" x 36" Gallmeyer & Livingston #550, hydraulic, inc.downfeed, chuck, 1970, #5333  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
12" x 36" Gallmeyer & Livingston #556, auto IDF, 3x auto fds, Walker EMC, '77, #151606  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
12" x 36" Grand Rapids #550, horizontal surface grinder, DRO, serial #550-226, #21573  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Email: sales@lakeshoremachinetool.com) John Rogers
12" x 36" Grand Rapids #550, DRO, 1973  rfq
Badger Machine & Equipment, Milwaukee, WI 414-405-4103 (Email: badgermach1@aol.com) Gary Hohl
12" x 36" Grand Rapids #550, horizontal surface grinder, serial #550-235, stock #54458  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
12" x 36" Mattison #1236, auto., IDF, vari-speed hydraulic, 15 HP, 1979, #6758  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
12" x 40" Kikinda #URB-A-1000, hydraulic, inc.downfeed, mag.chuck, coolant, 1989  Camera rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
12" x 40" Thompson #3B, 12 x 40 Mag.chuck, over the wheel dresser, coolant, 1953  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth
12" x 48" Gallmeyer & Livingston #65, surface grinder, horiz, 5 HP, 14" vert.working hght, 50" long., 14" cross, good, 1956, #G802514  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
12" x 48" Gallmeyer & Livingston #560, 14" wheel, magnetic chuck, dresser, 10 HP, 1950' s  Visit Dealer's Equipment Listings  rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
12" x 48" Magerle, swiss, 1200mm grind.length, 300mm width, 270mm cross travel, 127mm bore  Camera rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
12" x 48" Mattison #12x48, fully auto, vari-table feeds, coolant, dresser, 880 RPM, 1949, #G80252  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
12" x 48" Thompson #C, 1951, #18655  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
12" x 58" Grand Rapids #A, surface grinder, 15 HP, 12" x 43" mag.chuck, incremental downfeed, 1975, #G802523  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
13" x 29" Gallmeyer & Livingston #373, surface grinder, 12" x 24" table, #11478  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
13" x 29" Grand Rapids #370, surface grinder, 12" x 24" table, 12" x 1" x 3" wheel, #5795  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
14" x 12" Gallmeyer & Livingston Grand Rapids #450, surface grinder, 14" x 1" x 5" wheel, 14.25" x 30" table, coolant thru wheel, EMC, 1969  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
14" x 24" Gallmeyer & Livingston #373, incre.downfeed, 3x auto, EMC, 12" x 1" wheel, '91  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
14" x 24" Gallmeyer & Livingston #460, hydraulic surface grinder, 14" x 24" table, OWD, #5869  Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
14" x 32" Jakobsen #SJ24, incremental downfeed, 7.5 HP, 14" wheel, EMC, very nice  Camera Spec Sheet rfq
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave
14" x 32" Jakobsen #SJ1432, electromag.chuck, incr.DF, coolant, 1400 RPM, 7.5 HP, 1988  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Email: sales@usedmachinerysales.com) Spencer Minns
14" x 48" Mattison, surface grinder, stock #19891  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
14" x 72" Grand Rapids #A, 3-axis, 15 HP, 20" whl, 18" hght, coolant, chuck, '70, #UD39435  Camera rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
15" x 36" Elb #SWN9ND, surface grinder, 12" x 2" x 3" grinding wheel, fully automatic, 5 HP, 3-100 FPM, excellent, 1985, #G802519  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
15" x 40" Elb #SWN10VAI, surface grinder, 14" x 40" elec-mag chuck, inc power downfeed, elec above wheel dresser, 1977, #27499  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
15" x 42" Grand Rapids #580, surface grinder, 12" x 40" chuck, #7392  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
15.5" x 23.5" Nagase #SG-64, hydraulic surface grinder, EMC, 12" x 1.5" grinding wheel  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
16" x 24" Elb Perfekt #6 SPS-NK, PLC incremental downfeed, dressser/compensation, '00  rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
16" x 28" Chevalier #FSG-1628AD, surface grinder, IDF, 14" x 2" x 5" wheel, 5 HP, '97, #66280  Camera rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 28" Mark, 3-Axis automatic surface grinder, 12" x 24" electro chuck, mid-late'80s  Camera rfq
J Hebert Machine Tool Co., Charlotte, NC 704-825-1511 (Email: Hebertmachtool@bellsouth.net) Jon Hebert
16" x 32" Acer #AGS1632AHD, surface grinder, 3-Axis, elect.chuck, 14" x 2" x 5" wheel, coolant, clean, 1997, #28762  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
16" x 32" Chevalier #FSG-1632AD, 5 HP, #3229  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
16" x 32" Chevalier #FSG-1632AD, surface grinder, DRO, Walker EM chuck control, '89, #148896  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
16" x 32" Chevalier #FSG-1632AD, Walker EMC, DRO, 14" x 2" x 5" wheel  Camera rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
16" x 32" Chevalier #FSG-1632AD, 3-Axis surface grinder, 14" wheel, 5 HP, clean, 1993, #28643  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
16" x 32" Clausing #1632-ASD, surface grinder, 1750 RPM, 1996  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Email: sales@kdcapital.com) Sales Dept.
16" x 32" Jotes #SPG-4080E, power down feed, 12" x 2" wheel, chuck, coolant, 1990  Camera rfq
PTS Machinery, Irvine, CA 949-246-2978 (Email: gary@ptsmachinery.com) Gary Coleman
16" x 32" Kent #KGS-84S, programmable auto IDF, 3X power.feeds, EMC, coolant, '96, #150462  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
16" x 32" Mitsui #48S, hydraulic surface grinder, 11" x 1-1/2" grinding wheel, DRO  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
16" x 32" Okamoto #ACC-1632DX, auto downfeed, Fine Pole chuck, dresser, excellent, '95  Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Email: sales@wigglesworthmachinery.com) Gifford
16" x 32" Okamoto #PSG-84, incr.downfeed, mag.chuck, dresser, clnt, 5 HP, '81, #18122  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
16" x 36" Gallmeyer & Livingston #570, hydraulic surface grinder, #7720  Camera Spec Sheet rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
16" x 36" Gallmeyer & Livingston #570, IDF, CP&T chuck, 14" x 1-1/2" x 5" wheel, 1977, #9647  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
16" x 36" Grand Rapids #576, 14" x 1-1/2" x 5" wheel, electronic chuck control, 10 HP, #18029  Camera Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 40" Chevalier #FSG-1640AD, electronic auto IDF, 3x auto fds, EMC, clnt, '90, #146404  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
16" x 40" Chevalier #FSG-1640AD, auto., 16" x 40" EMC, parallel dress, 5 HP, #7047P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
16" x 40" Kent #KGS-410-AHD, hydraulic surface grinder, EMC, auto lube sys, 1986, #16593  Camera rfq
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
16" x 40" Kent #KGS-410AHD, IDF, OWD, chuck & controls, CP&T w/filtration, 5 HP, '86, #9719  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
16" x 40" Kent #KGS-410AHD, IDF, OWD, chuck & controls, CP&T w/filtration, 5 HP, '86, #9618  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
16" x 40" Kent #SGS-1640AHD, 3-Axis, fully automatic surface grinder, coolant system, work light, #A2340  Camera Show Video of Item Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
16" x 40" Regent #1640AHD, incremental downfeed, 3X auto, 12" x 2" wheel, dresser, 1989  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
16" x 48" Gallmeyer & Livingston #670, 16" x 48" Electro-Magnetic chuck, excellent  Camera Spec Sheet rfq
Mauldin Machine Inc, Jacksonville, AR 501-835-5494 (Email: jerry@mauldinmachine.com) Jerry Mauldin
16" x 48" Grand Rapids #670, automatic.hydraulic, mag.chuck, DRO, IDF, 20" wheel, 1967  rfq
Campbell-Sorensen Co Inc, Bloomfield Hills, MI 248-892-5233 (Email: info@campbellsorensen.com) Harry Sorensen
16" x 48" Mattison #1748, auto., 18" x 48" EMC, vari-speed hydraulic power, 15 HP, #4743  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
16" x 48" Mattison #3993, small die block, 24" spindle, clnt, Walker chuck.w/Demag, '80, #9724  Camera Spec Sheet rfq
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer
16" x 72" Thompson #C, 1978, #1480  Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Email: sales@wigglesworthmachinery.com) Gifford
16" x 96" Mattison Large, 24" under wheel, 16" x 96" chuck, serial #12769, #26080  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
16" x 192" Mattison, 30" under wheel, 20" wheel, 50 HP, 1967, #50562  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 192" Mattison, DRO, Travatrol incre.elec.cross feeds, 0-100 FPM table long fds, 50 HP  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
16-1/2" x 43" Kent #KGS-410-AHD, grinder, 13-73 FPM, 12" x 1-1/2" x 5" wheel, 1986, #16543  Camera rfq
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
18" x 48" Elb surface grinder, horizontal spindle, incremental downfeed, 1991, #3724  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: ss@scottmach.com) George Scott
18" x 48" Mattison, hydraulic table feed, 100 FPM, 20" diameter wheel, 15 HP, Mag.chuck, power elev  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
18" x 168" Hill-Acme, surface grinder, electro mag chucks, wheel dresser, auto downfd, hyd & manual cross fds, #BL160  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
18" x 168" Thompson #14PV, 30" wheel, 75 HP, EMC, swing away dresser, 1964, #50561  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
18" Ieca, OD grinder  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
19-5/8" x 59" Chevalier #FSG-2060 ADII, hydraulic surface grinder, 14" x 2" x 5" grinding wheel  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
20" x 40" Nicco #NSG-10S, incr.downfeed, hydraulic dresser, mag.chuck, 7-1/2 HP, 1980' s, #18125  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
20" x 48" Okamoto #PSG-125, hydraulic, incr.downfeed, mag.chuck, dresser, coolant, 1982  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
20" x 48" Okamoto #PSG-125, column type, increment downfeed, 1980  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
20" x 59" Sharp (Proth) #SH-2059, hydraulic long.feed, electro-mech.cross, 14" x 2" whl, '02  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
20" x 60" Kent #KGS-515AHD, 17.5" x 59" vari-elec.mag.chuck, dressr, coolant, 1987  Camera Spec Sheet rfq
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Email: sales@oconnellmachinery.com) W. O'Connell
20" x 60" Livnica Kikinda #PRB500/1500, auto hydraulic feed, incremental power downfeed, electro-mag chuck, 1990, #27431  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
20" x 60" Okamoto #PSG-155B, 23-1/2" u/wheel, incr.dwnfd, 1-100 FPM, 1988, #50519  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
20" x 60" Okamoto #PSG-155B, IDF, coolant, 1986  rfq
Solomon Machinery, Eastpointe, MI 586-774-2030 (Email: russ@solomonmachinery.com) Russ Solomon
20" x 60" Supertec Planotec #2060 NC, 3-Axis auto, programmable, E.M.chuck, 2007, #34884  Camera Visit Dealer's Equipment Listings  rfq
Machinery Network Inc, Encino, CA 310-826-4440 (Email: sales@machinerynetwork.com) Sales Dept.
20" x 61" Okamoto #PSG-155, 20" whl, 20.86" cr., 100 FPM, auto dwnfd, hydraulic dresser, #16545  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
20" x 72" Thompson #6CV, 20" x 72" electro-magnetic chuck w/neutrifier & rectifier, 6000 FPM grinding wheel, 30 HP, #27686  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
20" x 80" Okamoto #PSG205, hydraulic, mag.chuck, dresser, incr.downfeed, coolant, 1979, #17723  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
20" x 96" Mattison, 24" under, 20" x 6" wheel, coolant, dresser, 30 HP, #18428  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
20" x 96" Mattison, horizontal hydraulic surface grinder, EMC, vari-speed spindle  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln
20" x 96" Mattison, 30" under wheel (w/o chuck), 5" x 20" wheel, new electrics 1996  Camera rfq
Broaching Machine Specialties, Novi, MI 800-229-4666 (Email: bms@broachingmachine.com) Matt Egrin
20" x 120" Thompson #10C, 30 HP spindle, 5 HP, hydraulic rapid vert., coolant system  Camera rfq
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt
20" x 144" Gallmeyer & Livingston #F, 25" u/wheel, 6" wheel, (2) 20" x 60" mag.chuck, 30 HP  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
20" x 144" Thompson #C, surface grinder, Newall DRO, incremental power downfeed  rfq
MBI Worldwide LLC, Vernon Rockville, CT 860-202-8550 (Email: edfreligh@comcast.net) Edward Freligh
20" x 240" Thompson #CH, hydraulic, 268" long table travel, 20" wheel, 12" hole, 30 HP, (4) EMC  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
20" x 240" Thompson #CH, 20" x 6" wheel, EMC w/neutrofier, 30 HP, 1966, #50560  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
22" x 48" Blohm #HSF-512, hydraulic surface grinder w/automatic downfeed.EMC, 1989  Camera Spec Sheet rfq
Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Email: stevenson@dominionair.com) Robert Stevenson
24" x 16" Nicco #NSG-64H, surface grinder, 5 HP, 1700 RPM, magnetic chuck  Camera PDF rfq
520 Machinery Sales LLC, Schaumburg, IL 888-520-1768 (Email: everett@520machinery.com) Everett Dahlberg
24" x 40" Okamoto #ACC2440ST, auto dresser, plunge, coolant tank & pump, 20 HP, 1997  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Email: sales@usedmachinerysales.com) Spencer Minns
24" x 48" Danobat #RT-1200, 51" long., 32" cross, coolant system, 1985, #153136  Camera Spec Sheet Show Video of Item Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
24" x 48" Elb Perfekt #BD12SPNK, 16" under wheel, 4" W wheel, granite base, PLC, 1998  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
24" x 48" Thompson #C, 20" x 6" wheel, full chuck, 30 HP, 2010  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff
24" x 60" Mattison #2460, 125 FPM, 20" x 3" whl., 1/3-3 IPM, mag.chuck, 15HP, '79, #7296P  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
24" x 72" Mattison, 24" u/wheel, 20" x 6" max wheel, wheel dresser, 30 HP, coolant, #18318  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
24" x 72" Mattison, 36" under wheel, auto downfeed, 1978, #18429  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
24" x 72" Mattison, incremental downfeed, 3x auto, 24" hght, 20" x 6" wheel, 30 HP, 1975  Camera rfq
Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Email: sales@grandmarshallmachinery.com) Larry/ Paul/Marshall
24" x 72" Mattison, 36" height under wheel, 7.5 HP, rebuilt in 2000, S35251  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
24" x 72" Thompson #CH, H.D., full magnet, 50 HP, 1976  Camera Visit Dealer's Equipment Listings  rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
24" x 82" Gallmeyer & Livingston #F4R, surface grinder, 20" x 12" x 4" wheel, 24" x 72" table, built-in whl dresser, coolant, good, 1950' s  rfq
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
24" x 96" Mattison #24x96, surface grinder, 24" under wheel  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
24" x 96" Mattison #900/400, die block grinder horiz/vertical spindle combo, 1987  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp
24" x 96" Mattison #Medium, 96" vac.Chk, 48" EMC, 36" U/W, 30 HP, Fanuc O-GS, retro'93, #25602  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
24" x 96" Mattison, grinder, 36" under wheel, 75 HP, 1981  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
24" x 104" Mattison, 24" x 96", incr.downfeed, power 3-Axis, 30" vt.ht, 20" x 6" wheel, 20 HP  Camera Spec Sheet rfq
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
24" x 120" Mattison, downfeed, dresser, 30 HP, 1953  Camera rfq
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
24" x 124" Mattison #24x120, surface grinder, 18" x 10" x 3" wheel, 880 RPM, heavy duty cast iron, hydraulic feed, very good, 1953, #G802520  Camera Spec Sheet rfq
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
24" x 144" Mattison, 20" x 6" wheel, full chuck, 30 HP, 1959  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff
24" x 157" Thompson #C, magnetic chucks, 20" wheel, 1962  Camera Visit Dealer's Equipment Listings  rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
24" x 168" Mattison Medium, 36" u/whl, 30 HP, 20" whl, square column, s/n #22359, #26062  Camera Spec Sheet rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
24" x 168" Mattison surface grinder, 36" under wheel  rfq
Madison Machinery Co Inc, Riverhead, NY 631-722-4214 (Email: joe@madisonmachinery.com) Joe Madison
26" x 59" Mark #PSG0-60150AHR, auto IDF, 3x auto.fds, 14" wheel, EMC, clnt, '95, #148245  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
27.56" x 59.06" Okamoto #PSG-257, auto.precision horiz. hydraulic surface grinder, EMC  Spec Sheet Visit Dealer's Equipment Listings  rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
28" x 60" Okamoto #PSG-157, EMC, auto, 27.3" u/wheel, 20 HP, 20" x 3" x 5" wheel, '80, #16747  Camera Show Video of Item rfq
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
30" x 72" Mattison, 32" under wheel, incremental feed, 30 HP, #50518  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
30" x 192" Mattison Large, 24" u/wheel, Magnetic chucks, sludge conv, s/n #13186, #26081  Camera Spec Sheet rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
36" x 12" B & S #MicroMaster, newer Walker chuck w/vari mag, coolant, 12 x 1 wheel  Camera rfq
Winslow's Machine Tool Sales, Lexington, TN 731-614-1296 (Email: machinetoolswinslow@yahoo.com) Don Winslow
36" x 96" Thompson, 48" incremental downfeed, 30 HP, oil chiller, Kleen All filtration  Camera rfq
Gallery Of Machines, Marathon, NY 607-849-6028 (Email: Harry@galleryofmachines.com) Harry Hartman
36" x 120" Thompson #10CK, auto downfeed, 36" under wheel, #18633  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
36" x 120" Thompson #10CX, 36" u/wheel, incremental downfeed, 30 HP spindle, #8146  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
36" x 168" Mattison surface grinder, 30" x 36" x 168", v/nice, rebuilt & retrofit 1998, #10935  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
40" x 160" Danobat #RT4000, hydraulic, 19" x 12" x 2.5" wheel size  Camera Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Scott / Mark
60" x 196" Favretto #TU500, bridge style surface & way grinder, hz.& vt.spdls, 1977  Camera Spec Sheet rfq
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Email: sales@equipmenttrading.com) Don Paul
67" x 177" Waldrich Coburg #30-10S Double Column, universal head, 74" btwn columns, S28694  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
125" x 124" Campbell #3000, bridge style, Fanuc 30i, 30" u/whl, 158" X, 155" Y, 25" Z, clnt, '08  Camera rfq
Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Email: sales@wigglesworthmachinery.com) Gifford
Harvil, Grinder  Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: sales@hgrinc.com) Jon Frischkorn
Parker Majestic #618 Model 2Z, re-manufactured complete, 230/460 V., 1 HP, 3 ph, #12846  rfq
Expert Machine Repair & Sales, Roseville, MI 586-296-2250 (Email: expmachrepair@aol.com) Jeff Novak
Thompson surface grinder  rfq
Winfield Machine Repair, Roseville, MI 586-771-0010 (Email: winfieldmachine@ameritech.net) Dave Winfield

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise