Browse:  Machinery Electrical
RSS Blog Surplus Record

CUT OFF MACHINES (Also See Tube Machinery)

New & Used Metalworking & Fabricating Machinery
There are 76 listings in this category
File update: Tue, Sep 2, 2014 01:21
Advanced Search
Sort by:
Original Sort
3/4" Burr Oak #M2, high production cutoff, 120"long hitchfeed, tooling, in stock Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
1" B & K #12-1/2CT, 4-post, 45 spm, 8.5"SH, 20"x15"BP, 2"post dia, entry guide, #25518 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
1" Brehm Vulcan, tube cut-off machine, serial #1252, #6359 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger
1" Vulcan/Haven Shimmy sgl or dbl end, (2) Pabco 25 HP hyd.sys,Koolant Koolers,'02 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
1" Wimmer #FT200A, CNC bar cut-off,3-25 mm,8'x18-pc magazine,unld.sta,low hrs,'06 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green
1-1/8" Burr Oak #M5 Cutoff, pull apart rotary type cut off Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
1-1/4" Fenn #125 Impact cut-off rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
1-1/2" Comco #KC40SND, cut-off,hi-prod.auto.rotary,strght lgth fdr,auto endfinish,'05 Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
1-3/4" Bertolette #315, 1-3/4" max. OD, (2) available Camera rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
2" Continental #2A, semi-auto,roll type,pwr downfd w/auto.return,remote foot switch Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
2" Continental #2AC, tube cut off, pneumatic, up to 1/4"wall, 1972, #9558 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2" Evans #1500, pipe cut off & bevel,2"-14"cap.,w/Inside deburr,SMW air chuck Camera Spec Sheet rfq
Technical Machine Sales Inc, Longview, TX 903-753-1955 Craig Cave
2" Gatto #HS-2-4, traveling saw, dwn.act,2" x 4" profiles @ 20 cuts/min,2 HP,230/460 V.,rebuilt/never back in service, #46266 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
2" Modern #2K, Cut-off Machine,1/8"-2"cap.,20' auto barfeeder,PLC Ctrls,1994,#5569 Camera rfq
Presses for Industry, Detroit, MI 313-839-9300 (Fax 313-839-9600) C. Thornton
2" Modern #2K Cutoff, 2 slide,Allen Bradley PLC,20'mag.feed,1987,rebuilt 1994,#9369 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2" Modern #2LD, 16'auto barfeeder,PLC ctrl,1/4"- 2-1/8"OD,10 HP,1800 RPM,1992,#6775 Camera rfq
Presses for Industry, Detroit, MI 313-839-9300 (Fax 313-839-9600) C. Thornton
2" Sinico auto.cut off saw, magazine type infd,hyd.clamping,auto.dbl end finishing Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1998, #9695 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1992, #9689 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1995, #9690 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1995, #9691 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1996, #9692 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1997, #9693 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/8" Modern #2LD, cut-off, 16'magazine bar feed, 2 slides, 1997, #9694 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
2-1/2" Sinico #TC-60, tube cutoff system,auto.hi-prod,built-in end facing & centering Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
3" Addison McKee #FM70TT, 2004 (2) Camera rfq
D & D Industries Inc, Monclova, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
3" Bardons & Oliver, 3-slides, OD chamfer, 20' magazine feed rack, 1977,Ref.#15470 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3" Continental #3A, w/20'bar feed, extra blades, auto cut-off, #013905S Camera Spec Sheet rfq
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
3" Eagle #TC/TC, twin head trimmer & cut-off, 1990, S24847 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
3" Modern #3A, tube cut-off,1/4"-3",216-648 RPM,front & rear cross slides,clnt,#6100 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
3" Modern #3B, 1/4" to 3-1/8"OD cap.(2-1/2"pipe),manual,2 slides,stock stop rfq
Estes Machinery Co, Chicago, IL 312-543-6772 Peter Estes
3" Modern #3B, 1/4"manual cut-off, 3-1/8"OD cap., 1985, #012401S Camera Spec Sheet rfq
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) J.J. Francis
3" Modern #3K, tube cut off machine, serial #3K-3140, stock #51836 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3" Modern #3K, 2 slide, 6'runout, 1968, #9148 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
3" Modern #3K-LH, Allen Bradley electrics,24'auto barfeed system,10'overhead stock-stop,5 HP,#26639 Camera Spec Sheet  Show Video of Item Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
3" Modern #3LD, 1/4"-3-3/8"cap,auto long bar loader hopper tbl,PLC ctrl,'97,#5570 Camera rfq
Presses for Industry, Detroit, MI 313-839-9300 (Fax 313-839-9600) C. Thornton
3" Pipe splitter saw, #20591 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
3" Tru-Motion, .100", high speed-distortion free cuts, PLC controls, tooling Camera rfq
Freedom Machinery Company Inc, Grand Rapids, OH 419-832-0100 (Fax 419-832-6000) Dave/ Gari
3-1/8" Modern #3LD, cut off, stock #51112 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3-3/8" Modern #3LD, cut-off,3 slides,20'mag.bar feed,Allen Bradley PLC,1987,#9368 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
3.5" Alpha, double cut die,flying ram,air clutch,readouts,30 HP,1980 Camera Spec Sheet rfq
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns
4" Bardons & Oliver #34, chamfering, magazine barfeed, tooling, 1986 Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
4" Bardons & Oliver #34, chamfering, tooling, 1982, S23972 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
4" Bardons & Oliver #34A, full set collets,feed tubes,stock stands,cut-off tools Camera rfq
Stanley Machinery Corp, Agawam, MA 413-786-1300 Stan Cohen
4" Gatto #HS24, 8"dia.blade, downacting, traveling saw, #26314 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
4" Leco #CM-24 Metallogrpahic Sample Cut Off Machine, 14"cutting wheel,5 HP Camera Spec Sheet rfq
Frank Bacon Machinery Sales, Warren, MI 586-756-4280 (Fax 586-756-8009) John/Steve/Ron
4-1/2" Farris universal traveling auto saw, AS90 to 4-1/2"flat & 3-1/2"round,10"blade,adj.centerline height,30 cpm,#14174 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
4-5/8" Modern #4B, tube cut-off, 3 HP, misc.collets & guide tubes, #8504 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
5" Bardons & Oliver #35, rebuilt, new Servo drives, new 24'bar feed, 1952/2012 rfq
R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff
5"-20" Custom dual rotor fly knife cutter, twin single bladed cutting heads, 5"-20"long cut, used, #20677 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
5" Wagner Type M, 3-1/4"rounds, 4"x 2"bar, cuts ferrous and non-ferrous, #12920 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Fax 847-640-0431) Sales Dept.
6" Eisele #VA1-H, 12"blade, auto feed - hydraulic, feed rack, #12919 Camera Spec Sheet rfq
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Fax 847-640-0431) Sales Dept.
6" Modern #6L, tube cut-off lathe, target stop, A-B controls Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
7" Continental #6, tube cutoff machine, pneumatic end stop, adjustable roller width Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
8" Bardons & Oliver #RH-800, 8"OD,1"wall thkns,4 slides,Fanuc Beta 8/3000,PLC GE Rx3i Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Fax 847-427-8884) Sales Dept.
8" Modern #8KD, 1.5"wall, 3"bar, 59-912 RPM, Sony DRO, 1977 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn
12" Metaplast #MST-4, travel saw, up-act, 7"W x 2.5"H profile cut,4"dia.pipe cap,1.5 HP, 575 V.,fines collect,blwr, #46351 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
12-1/2" Sharp pipe or tube for pipe couplings rfq
American Steel Products Co, Toledo, OH 419-843-7262 (Fax 419-843-5288) Ford Cauffiel
13" CDS #CTS6.5-13, traveling saw, Servo driven w/3 HP,up-acting,3.5"H x 13"W profile max.cut,6.7"max.pipe cut,#31633 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
16" Greiner travelling saw, #27206 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
18" Bobor #MDHD15-8, Traveling Saw, 3 HP, 575 V., Ser. S2M9, 1996, #41359 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
18" Bobor #MDHD15-8, Traveling Saw, 3 HP, 575 V., Ser. S2M10, 1996, #41360 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
20" Farris traveling saw, #23397 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
20" Oliver #2023, cut-off saw,up-cutting,dust collection system,1985,#55033 Camera Spec Sheet rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
24" Sakas traveling saw, #23812 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
28" Chop saw, pneumatic controls, #17581 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
Battenfeld #STU250E, planetary saw, BMC controls w/Lenz drives, 480 V., serial #9130-6730, 2001, #35560 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
Continental #3A, pneu.feed,work rest w/set of rolls,cast iron,pipe stops,(3) each Camera rfq
Stanley Machinery Corp, Agawam, MA 413-786-1300 Stan Cohen
Custom fly knife rotary cutter, #20685 Camera Spec Sheet rfq
Federal Equipment Co, Cleveland, OH 216-271-3500 (Fax 216-271-5210) Joanne Parente
Dake / MEP #Cobra-350-ax cut-off saw, fully auto,hi-spd,hi-production,pneu.pwr dwnfd Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
Landis, pneu.rotary blade cut off,work stop,5HP hi eff,3 ea.blades,air filter,oiler Camera rfq
Stanley Machinery Corp, Agawam, MA 413-786-1300 Stan Cohen
Modern #2LD, conventional cut-off lathe, 15 HP, 1996 Camera Spec Sheet rfq
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Fax 414-264-3652) Alex Hawley
Modern #3A, 3 HP,third slide,1/4"-3"OD front & rear slides,barfeed,1952,#14956 Camera Spec Sheet rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
Modern #3K, tube cut-off,auto,hi-production,dbl cross slide cut.action,chamfering arms Camera Visit Dealer's Equipment Listings  rfq
AM Industrial, Brook Park, OH 216-433-7171 (Fax 216-433-4008) Curt Wyman
Pedrazolli #SCL102-3000, cut to length, #7715 Camera Spec Sheet Visit Dealer's Equipment Listings  rfq
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
Presi Metallurgical Mecatome #T355, manual cut-off saw,floor standing,355mm wheel Camera Visit Dealer's Equipment Listings  rfq
Used Equipment Store, Mississauga, ON 647-244-0334 (Fax 647-528-2467) Michael Lehmann

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet = spec sheet available    rfq = request quote from seller    camera = video available    web site = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record, Inc., an Ariba Company. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise