CHEMICAL, PETROLEUM, GAS & PROCESSING EQUIPMENT:
BALL, PEBBLE, SAG MILLS
There are 44 listings in this category
File update: Fri, May 16, 2008 01:25 		ORIGINAL SORT Sort by Location
Sort by Date
Advanced Search
15" x 36" Inque Seisakushoco 3-roll paint mill,#15x36s,15"dia,36"roll work leng,#24905  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
18" x 24" Patterson, jacketed, steel ball mill, unitized Base (2)  Request quote from Seller
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Fax 973-335-5333) James Siegel
24" x 30" U.S. Stoneware, 52 gal. unibody, water jacketed  Request quote from Seller
Globe Trading Co, Farmington Hills, MI 248-851-0897 (Fax 248-851-9038) M.J.Landay
24" x 30" U.S. Stoneware, 52 gal. Urethane lined, new  Request quote from Seller
Globe Trading Co, Farmington Hills, MI 248-851-0897 (Fax 248-851-9038) M.J.Landay
24" x 30" U.S. Stoneware, 52 gallon, rubber lined, new  Request quote from Seller
Globe Trading Co, Farmington Hills, MI 248-851-0897 (Fax 248-851-9038) M.J.Landay
29" x 22" Paul O. Abbe Pebble Mill  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Jim Mueller
32" x 36" Paul Abbe, pebble mills, jacketed, Alumina lined, (3) each  Show photo of item Request quote from Seller
EcReCon Inc., Pennsgrove, NJ 856-299-4500 (Fax 856-299-4446) Nick Bercute
3' x 5' Denver, Ball Rod Mill, #18019  Show item detail Request quote from Seller
Alan Ross Machinery Corp, Northbrook, IL 847-480-8900 (Fax 847-480-1830) Alan Ross
38" x 48" U.S. Stoneware, 210 gal. Aludur (hi aluminum) lined, used  Request quote from Seller
Globe Trading Co, Farmington Hills, MI 248-851-0897 (Fax 248-851-9038) M.J.Landay
40" x 52' Paul O. Abbe, Jacketed Pebble Mill  Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Jim Mueller
48" x 48" Patterson, jacketed, steel ball mill  Request quote from Seller
H & P Equipment Co Inc, Montville, NJ 973-335-9770 (Fax 973-335-5333) James Siegel
4' x 5' Fiedler, no motor, fiedler 4' x 5' pebble mill, with running  Request quote from Seller
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (415-467-2639) Dominic Piazza
4' x 5' Patterson, porcelain, mill, paint, pebble  Request quote from Seller
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (415-467-2639) Dominic Piazza
48" x 66" Patterson,steel ball mill/reactor,jkt,hi-pressure,hi-temp,30hp drives  Show photo of item Request quote from Seller
Aadvanced Machinery Inc, Clinton Township, MI 586-790-1717 (Fax 586-790-1871) Tom S./Tim C.
54" x 60" Paul O. Abbe #3C, 25 HP, steel, jacketed. (qty.2)  Show photo of item Request quote from Seller
Ingalls Process Equipment, Painesville, OH 440-352-9403 (Fax 440-352-9476) Dick Ingalls
4'6" x 5' Patterson, s/st, patterson stainless steel lined paint mills  Request quote from Seller
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (415-467-2639) Dominic Piazza
5' x 7' Denver Ball Mills, wet, 75 HP, steel lined (2)  Request quote from Seller
M C LaBarr Mining Machy, Tucson, AZ 520-577-2414 (Fax 520-577-0952) Bud LaBarr
5' x 14' Marcy, 200 HP, dry, ball mill, single compartment  Request quote from Seller
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (Fax 415-467-2639) Dominic Piazza
5' x 14' Marcy ball mill, (6j-s01)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
6' x 4' Denver Ball Mill, #10018  Show item detail Request quote from Seller
Alan Ross Machinery Corp, Northbrook, IL 847-480-8900 (Fax 847-480-1830) Alan Ross
6' x 5' Paul Abbe Ball Mill, alumina lined, with media charge (pc11746)  Show photo of item Show item detail Request quote from Seller
Pacific Ceramic Mach & Eqpt, Stockton, CA 209-462-3405 (Fax 209-462-5142) Ron Poelstra
6' x 8' Patterson, ceramic lined w/charge  Request quote from Seller
Mill & Factory Service, Saint Louis, MO 314-422-2157 (Fax 314-872-7712) R.H. Smith
6' x 10' Patterson, jacketed, 250 HP, explosion proof, used 1 yr., 1987  Show photo of item Show item detail Request quote from Seller
R & D Equipment Sales Co, Ischua, NY 716-557-8306 (Fax 716-557-2049) Randy Warfield
6' x 20' Allis-Chalmers, ceramic lined  Request quote from Seller
Mill & Factory Service, Saint Louis, MO 314-422-2157 (Fax 314-872-7712) R.H. Smith
7' x 12' Hardinge, tri-cone ball mill, gear reducer & 300 HP motor, media  Request quote from Seller
Enviro-Dewatering & Recovery, Charlotte, NC 704-542-1037 (Fax 704-544-0957) John Munn
8' x 6' Marcy, 250 hp, wet, rubber liners/lift, ball mill  Request quote from Seller
Machinery & Equipment Co, San Francisco, CA 415-467-3400 (415-467-2639) Dominic Piazza
8' x 9' Traylor ball mill, RU, trunnion feed & discharge, less motor  Request quote from Seller
Enviro-Dewatering & Recovery, Charlotte, NC 704-542-1037 (Fax 704-544-0957) John Munn
8' x 12' Allis-Chalmers Ball Mill, with drives (2)  Show photo of item Request quote from Seller
S G V Sales, Layton, UT 801-721-9194 (Fax 801-779-3404) Steve Vockel
9' x 15' Kobe-Allis ball mill, (#6K-PH08)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
9'5" x 16' Marian, ball mill, wet grind, trunnion feed & discharge, 750 HP  Request quote from Seller
Enviro-Dewatering & Recovery, Charlotte, NC 704-542-1037 (Fax 704-544-0957) John Munn
9'6" x 13' Marcy ball mill, (#6K-04)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
10' x 48" Hardinge Conical Ball Mill, 225 HP, 2300 V., excellent value (3)  Request quote from Seller
M C LaBarr Mining Machy, Tucson, AZ 520-577-2414 (Fax 520-577-0952) Bud LaBarr
10' x 10' Kurimoto ball mill, (#6C-208)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
10' x 18' Allis-Chalmers ball mill, (#6C-209)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
10'8" x 15' Marcy Rod or Ball Mill (#6J-W32)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
13'6" x 4' Marcy, sag mill, (6C-20)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
14'5" x 21'5" Ani-Ruwolt ball mill (#6C-SI02)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
13'78" x 22'31" Morgardshammar sag mill, (#6C-17)  Show photo of item Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
22' x 7' Hardinge sag mill (3) (#6k-03)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
24' x 8' Hardinge sag mill (4) (#6k-02)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
28' x 10' Hardinge sag mill, (#6C-161)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
30' x 7' Allis Minerals, dry sag mill, (6J-SG01)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
Claudius Peter #EM-59 grinding mill (#6C-08)  Request quote from Seller
A M King Industries, Oroville, CA 800-334-6699 (Fax 530-534-6013) Albert King
Patterson Ball Mill, 30 HP, w/8K pounds media, in excellent condition  Show photo of item Request quote from Seller
Southwest Trading Industries, Houston, TX 800-492-6850 (Fax713-2251942) Jesse Rojas

Back to category listings.

Photo = photo available    Spec sheet = spec sheet available    Request a quote = request quote from seller    HSB Warranty = includes HSB warranty    Visit Dealer's listings = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
 
  Advanced Search
Surplus Record http://www.surplusrecord.com
Tel: 312-372-9077
Privacy Policy 		Ariba Logo