Surplus Record Machinery

BORING MILLS, HORIZONTAL, Table Type (Also See CNC Machinery & Equipment

Browse: Machinery Electrical

Machinery & Equipment >

Boring Mills >

Boring Mills, Horizontal, Table Type

BORING MILLS, HORIZONTAL, Table Type (Also See CNC Machinery & Equipment)

Orca Machine Tools, Inc. is your used machine tool specialist

There are 158 listings in this category
File update: Tue, May 21, 2013 01:23

Advanced Search

Sort by:

Original Sort

2.5" Forges Degilly, 28"x35"rotary tbl,#4MT,10-1250 RPM,36"cross,29"vert.,#6476

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Fax 801-531-9555) Bill Wilson

3" Ceruti, HBM,29"x 39"table,15-1500 RPM,28"long.travel,44"cross travel,#5MT,#4372

Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey

3" Giddings & Lewis #300T, 36" x72"T-slot table, 2-axis DRO, Ser.#100-100-60, 1960

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Tom Noone

3" G & L #300T, 30"x 48"table,36"cross,36"vt,#5 MT,1600 RPM,R/T,10 HP,#15017

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

3" G & L #300T, 30"x 48"table,44"cross,34"vert.,55"saddle,power rapid,low hrs,#9538

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Fax 801-531-9555) Bill Wilson

3" Giddings & Lewis #330T, #5MT,2 spindle,84"cross,48"vertical,15 HP,#7864

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

3" Giddings & Lewis #330T, 2-Spdl., Sony 3-Axis DRO, 36"x74"Tbl, 24"vert, 5MT, 1500rpm, Ser.#6303, #2331

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

3" Lucas #41B-48, #5 MT,13-1500 RPM,18"spindle trvl,34"x68"table,48"cross,.001-.698 IPR,1954,#B550026

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

3" Scharmann Rheydt #N66145108, table type HBM,Newall DP8,3-Axis DRO,rotary table,outboard support,#A1812

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

3" Scharmann #WB75, 37"X,45"Y,facing head,tailstock,rotary table,#5MT,1957,#21004

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

3" Scharmann #WB75, 31" x 39" rot.table, 37" X, 45" Y, 48" Z, 6MT, Ser.#6177

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

3" Supermill #AL76, 26"hor.tvl,#5MT,16 spdl.spds.114-1800 RPM,18"facing,RT,#41064

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) Simon Srybnik

3" Tos #W75, 49"X,35"Y,rotary table,1800 RPM,facing head,4-axis DRO,1988,#15786

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

3" Wotan, rotary table, built in outriggers, 1975

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

3.145" Union #BFT80/2, Boring Mill,Rotary Table,Built-In Facing Head,Ready To Go

DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

3.35" Nomura #B-85BT-2, rotary table,PDB,Sony 2-Axis DRO,steel way covers,15 HP,#4668

IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger

3.375" Wotan #B-85, 38-1/2" x 41-3/4"tbl., #5 Morse, 40"Cr., 43"long., 1000rpm, outboard sup., 1958, #2242

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

3.5" Cincinnati Gilbert #3-1/2, boring mill,60"X,60"Y,15 HP,very good,#B55003

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

3.5" Cincinnati Gilbert, 66"x 54"Tee Slotted Table, #5MT spindle, 24-1420 RPM, Tag #15473

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman

3.5" PBR #AF90, 58"X,48"Y,50"W,60"Z, rotary table, DRO, 1978, #19564

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

3-1/2" Scharmann, 90mm,#5MT,750 RPM,40"x40"r/tbl,40"X,36"Y,55"Z,Newall 3-Axis DRO

Industrial Machinery Corp, New Berlin, WI 414-672-5900 (Fax 414-672-3114) Jim Zvonar

3.5" Shibuara #BFT-9, 35"x59"tbl,#5MT,AcuRite 2-Axis DRO,pendant ctrl,15 HP,#4849

IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger

3-1/2" Summit, 51"x43"tbl,49"X,59"Y,28"spindle,1180 RPM,outboard,3-Axis DRO

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

3-1/2" Summit, #5MT,51"x43"rotary tbl,360°,45"vert,58"cr,28"spdl,45"bed,1975,#4122

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

3.5" Toshiba /Shibaura #BFT-9R, 39"x 47"rotary table,15 HP, #5MT, #26458

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord

3.5" Wotan #B90, 43"x 49"table,28"W,54"X,49"Y,38"Z,#5MT,Sony DRO,tooling included

Hanza International, Moorestown, NJ 856-608-9090 (Fax 856-608-0991) Mark Rubin

3.55" Union #BFT90/3 1, 39"x44"r/tbl,#50,63"x42"x59",1600 RPM,Heidenhain 4-Axis DRO

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

3.93" Monti, 98"X, 59"Y, 47"x 59"rotary table, 3-Axis DRO, 1979, #21578

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

3.93" Tos #W100, #50 taper,49"x49"table,49.21"long,63"travel,44"vertical,15 HP,facing head

Modern Tool Ltd, Calgary, AB 403-236-1150 (Fax 403-236-4277) Mark Senecal

4" Bullard #75, 48"x 96"table,PDQ quick change,48"vertical,60"cross,readouts

Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Thomas Noone

4" Cincinnati Gilbert, 48"x60"tbl,48"vert,#50 taper,7-1610 RPM,20 HP,1977,#14421

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" Collet & Engelhardt #BF-100, 55"x71"PRT,to 1500 RPM,21"B.I.F.H.,tailstock,15 HP

Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein

4" DeVlieg #4K72, 72"horiz.,60"vert.,40"X72"tbl,1220 RPM,#50 tpr,Dynapath,PDB,1975

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

4" Englehart #BFF130, 62"x70"rt,36"W,54"X,54"Y,108"Z,50NST,facing hd,tlstk,'60

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

4" G & L Fraser #340T,#5MT,600rpm,48x98"tbl,86"cr,60"vrt,25hp,440/3/60,ID#12155

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" Giddings & Lewis #340T, 48"vert., 36"x 74", 2-axis readout, 1940's

Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Fax 713-699-8986) Bob Hess

4" G & L #340T, 48"x98"tbl,85"cross,52"vert.,outriggers,Acu-Rite DRO,very fine,#8566

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Fax 801-531-9555) Bill Wilson

4" G & L #340T, 48"x98"tbl,60"vert.,outriggers,perhaps finest avail.anywhere,#6565

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Fax 801-531-9555) Bill Wilson

4" Giddings & Lewis #340T, #5MT,48"x74"tbl,65"cr.,49"vert.,DRO,supports,v/good,#9493

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Fax 801-531-9555) Bill Wilson

4" G & L #340T, 1500 RPM,2"aux.spdl.,74"x48"tbl,62"X,64"Y,72"Z,Newall 2-Axis DRO

Industrial Machinery Corp, New Berlin, WI 414-672-5900 (Fax 414-672-3114) Jim Zvonar

4" Giddings & Lewis #340-T, 36"x 74"table, 48"vertical, 1956

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Giddings & Lewis #340T, 36"x 72"table, 1956

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Giddings & Lewis #340T, 48"x 72"table, tailstock, vertical head, 1956

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" G & L #340T, 2"aux.spdl.,31"x62"table,7.5-1500 RPM,40"vert.,54"cross,v/good,#7537

Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Fax 801-531-9555) Bill Wilson

4" G & L #65-E4-T, 48"x 96"table,84"cross,72"vert.,#50 taper,PDB,DRO,20 HP,1965

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

4" Giddings & Lewis #65E4T, 48"x 98"table, #50 taper, 1300 RPM, 20 HP

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

4" G & L #65-E4-T, 48"x 84"tbl,72"X,60"Y,1320 RPM,#50 PDB,H/W,DRO,1964,#15289

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" Giddings & Lewis #70D4T, HBM, 36"x 72"table, Gov't machine, 1968

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" G & L #70-E4-T, Sony DRO,PDB,60"x48"x48"x36"trvl,36"x72"tbl,20HP,#50 tpr,'69

Machinery Works Inc, Saukville, WI 262-284-5611 (Fax 262-284-5613) Adam Wescott

4" G & L #70-E4T, 48"x146"tbl,134"X,72"Y,30"spdl.trvl,#50 taper,pendant,1968,#2979

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

4" Giddings & Lewis horizontal boring mill, 36"x 72",60"x 60"x 60"travels,1969

Manufacturing Solutions, Costa Mesa, CA 714-545-0940 (Fax 714-850-8795) Mike Dieveney

4" Juaristi #MDR110, 78"X,56"Y,48"x60"rotary tbl,#50 tpr,3-Axis readout,'70,#22300

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Kuraki #KBT-1003W, 59"x47"trvl,49"vert,built in rotary,#50 tpr,tlg,1977,#9441

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

4" Kuraki #KBT-101, HBM, 35"x 67"table, 48"vert, facing head, 15 HP, #9455

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

4" Lucas #41B-48, 48"X,36"Y, 36"x 62", 1550 RPM, Pendant, #50 taper, #21628

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Lucas #42B-60, boring mill,60"X-horizontal tvl of table,20 HP,1955, #B550016

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

4" Lucas #42B-60, 74"x 48"table, 60"X, 58.5"Y, 74"Z, 25 HP, 5MT, Ser.#42B1517

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Fax 262-965-3654) Scott Buth

4" Lucas #42B84, 48"x86"tbl, 36"spdl.trav, 60"vert, 72"cr, DRO, 20 HP, 50 taper, #2493

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

4" Lucas #42B84, 48"x 86"tbl,9-1200 RPM,20 HP,built in 4-way bed,2-Axis DRO

Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler

4" Lucas #441B-72, 60"vert., 60"cross, 3-Axis DRO, lm-7 board, 1967

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

4" Lucas, HBM, 42" x 72"table, 72"cross, 1962

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Nomura #B100, 73"X,53"Y,26"Z,48"x80"tbl,#50 taper,readouts,20 HP,1970,#16077

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Nomura #B100WR, PDB,power rotary table,tapping cycle,outboard support,12 HP,#4682

IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger

4" Plauert, 61"x70"R/T,96"cr,44"vt,1250 RPM,#5 MT,face hd,outboard,15 HP,#15064

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" Scharmann #FB100, 61"X,49"Y,rotary table,facing head,DRO,#50 taper,1968,#19415

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Scharmann, 72"cross, 72"vert., 66"x 51"rotary table, facing head

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

4" Shibaura, horizontal boring mill, #53154

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

4" Shibaura #BT-10B, 49"x 49"rotary table,55"X,49"Y,45"Z,1000 RPM,DRO,1975

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

4" Shibaura #BT-10BR1, table type horizontal boring mill, 1977

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

4" Shibaura #BT-10BR3, 55"x 63'rotary tble, #50 taper, 1000 RPM, 70"cross, 1977

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

4" Stanko, 49"x 49"power r/table,50"cross,40"vert,40"long,30 HP,12-1250 RPM

Soudogaz Inc, Chicoutimi, QC 418-889-2002 (Fax 418-889-2012) Charles Potvin

4" Summit, 43"x 51"rotary table,56"cross,50"vt,#5 MT,1250 RPM,O/B,15 HP,1974,#15351

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" Supermill #J, 48"x 60"rotary table, outboard support, 1960's

Netmachinery Inc., Mooresville, NC 704-660-8130 (Fax 704-663-3475) David Kragh

4" Tos #W100, #50 taper, facing head, 1994

Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Fax 519-622-8351) Paul Geddes

4" Tos #W100, 63"X,44"Y,rotary tbl,tlstk,facing head,readouts,#50 tpr,1976,#21393

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Tos #W100, 63"X,44"Y,built-in r/tbl,facing hd,thrdng,#50 tpr,readouts,'78,#21607

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4" Tos #W100A, 63"X,44"Y,49"x49",1120 RPM,15 HP,facing head,Heidenhain DRO,1994

Machinery Inc, Sherbrooke, QC 819-346-2369 (Fax 819-346-5217) Stephane Gourde

4" Tos #W100A, 63"X,49"Z,built-in try tbl,facing hd,thrdg,50 tpr,DRO,tlstk,misc.tlg,1988

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

4" Toshiba #BT10AR, 44"x49"rot.tbl., 3-Axis DRO, 48"Vert., 55"Cross, 1000 RPM, tailstock, 1970, #123680

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

4" Toshiba #BT-10B, 3-Axis DRO, 59"Cr.& Vert., 44"x48"built in rot.tbl., 50 Taper, 1000rpm, 1981, #2316

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

4" Toshiba Shibaura #BT10BR, Pendant ctrl,power rotary table,3-Axis DRO,15 HP,#4288

IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger

4" Toshiba #BT-10BR, 44"x49"r/tbl,55"cr.,49"vert.,#50 tpr,PDB,4 way bed,DRO,1975

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

4" Toshiba, rotary table, tailstock

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Toshiba, rotary table, #50 spindle, 1979

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Wotan #B100L, 40"x 68"table,60"X,48"Y,#50 taper,1600 RPM,15 HP,1970,#14962

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

4" Wotan #B100S, PDB,Fagor 3-Axis DRO,power rotary table,15 HP,#4683

IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger

4" Wotan #B100S, rotary table, #50 spindle, 1974

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Wotan #B105M, rotary table, #50 spindle, built-in outrigger

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4" Wotan #B105S, hardways, #50 spindle, rotary table, 1980, (2) available

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4.12" Summit #HTM4, Heidenhain TNC-124 strght cut w/X,Y,W scale fdbck,pwr.r/tbl,'98

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax 713-699-3389) Mike Richards

4.13" Wotan Teletrol III, 70"X,51"Y, #50, 44"x 55"rotary table, DRO's, 1970, #22952

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

4.25" Sacem #MST-XC-110, 47"x57"r/tbl,1200rpm,hardways,in/mm,pendant,'79,#149376

Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt

4-1/4" Sacem, rotary table, #50 spindle, threading, 1979

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

4.3" Shenyang (SMTCL) #AH110,49"x43"rot.tbl,Siemens touch PLC,auto cycle,facing hd,'03

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

4-3/8" Scharmann, 110mm,#6MT,720 RPM,64"x56"r/tbl,50"X,48"Y,60"Z,3-Axis Trak DRO

Industrial Machinery Corp, New Berlin, WI 414-672-5900 (Fax 414-672-3114) Jim Zvonar

4.5" Lucas #436 45/36, Morse taper, outboards, 15 HP, 1000 RPM

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

4-1/2" Scharmann #4-1/2, horizontal boring mills,table type,#5MT,47"x63"rotary tbl,72"cross,3.4-700 RPM,pendant ctrl,#B55006

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

4.528" Ikegai #DA2115T, 55"x63"power rotary table,55"X,58"Y,120"Z,facing head

Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch

4.9" Ikegai #DA2125T, 47"x56" Rot Tbl, 60" X, 48" Y, 1000 RPM, F/H, DRO, 15 HP, 1972, #15107

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Cincinnati Gilbert #J, HBM,84"vertical,#50 PDB,Anilam DRO,30 HP,1976,#141709

Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt

5" Cincinnati Gilbert #J122, 92"x53"table,15-1500 RPM,36"spindle travel,stock #1777

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

5" Cincinnati Gilbert #MDLJ, #50 tpr,84"vert.,120"cr.,60"x135"table,3-axis DRO,1976

Carney Machinery Co, Wilmington, DE 302-571-8382 (Fax 302-571-9538) Mike Carney

5" Cincinnati Gilbert Type J CNC, 60"x 121"table, 700 RPM, 120"cross, 84"vertical

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

5" Giddings & Lewis #130, HBM table type,74"x47"tbl,109"X,80"Y,35.9"Z,DRO,'75,#5608

Presses for Industry, Detroit, MI 313-839-9300 (Fax 313-839-9600) C. Thornton

5" Giddings & Lewis #150-1028, horizontal boring mill, #13062

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

5" Giddings & Lewis #350T, 2-axis DRO,outboard support,25 HP,s/n #5518,#6135

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes

5" Giddings & Lewis #350T, HBM,table type,#50 MMT,36"x84"tbl,72"cross,15 HP,6.25-375 RPM,rapids,tailstock,#B550035

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

5" G & L #350T, #6MT,975 RPM,122"x60"tbl,110"x72"x60",Sony 3-Axis DRO,s/n #9379

Industrial Machinery Corp, New Berlin, WI 414-672-5900 (Fax 414-672-3114) Jim Zvonar

5" Giddings & Lewis #350T, 48"x 72"table, tailstock, 1956

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" G & L #56 Hi-Power G type mill, 6'x12'table,10'X,5'Y,6'Z,25 HP,300 RPM,older,good

Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Fax 860-388-2740) Ray Magaldi

5" Giddings & Lewis #65D5T, HBM, 60"x 120"table, #50 taper, 1964

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" G & L #65H5T, 48"x110"tbl,96"cr,62"ct,#50,1020 RPM,40 HP,rblt 2010,#14671

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Giddings & Lewis #65H5-T, 60"vert., 84"cross, Mitutoyo DRO, 1965

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

5" Giddings & Lewis Fraser #70A-DP5-T, 60"x120"Tbl., 110"X, 60"Y, 36"Z, 30 HP, Sony DRO, pend.ctrl., Ser.#150-815, #2315

Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Fax 847-290-0168) John Myers

5" Giddings & Lewis Fraser #70-ADP-5T, 48"x 96"table, 1974

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" Giddings & Lewis #70-D5-T, #50 PDB,Hard bed & saddle,Newall DRO,1968,#149216

Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt

5" Giddings & Lewis Fraser #70DP5-T, #50 PDB,Heidenhain DRO's,25 HP,1967,#149868

Machinery Values Inc, Harrison, NJ 973-497-7570 (Fax 973-497-7501) David Valitt

5" Giddings & Lewis Fraser #80-DP5, horizontal boring mill, 48"x 98"table, #9012

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

5" G & L Fraser #A130T, 60"Vert,60"Cross,48"x72"Tbl,#50 Tpr w/PDB,DRO,1975

O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell

5" G & L Fraser #A130T, #50 PDB,6-1120rpm,48"x96"tbl,84"cr,70"vt,30 HP,1981,#12069

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Giddings & Lewis Fraser, 60"x 120"table,#50 spindle,108"cross,ballscrews,1967

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" Giddings & Lewis Fraser, 72"vertical, 60"x 120"table, 1972

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" Giddings & Lewis #H-5, boring mill,72"x 170",1000 RPM,#50 tpr,40 HP,G/L CNC,#8776

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vander Ziel

5" K&R #KHT130, 130mm spdl,Siemens 880 CNC,built in CNC facing head,2 pllts,#3819

DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Fax 905-676-9436) Nelson Martins

5" Lazzatti #HB127, 48"x 100" tbl, 96"X,72"Y,36"Z,59"W, 48"x 48" Shibaura rotary table

Soudogaz Inc, Chicoutimi, QC 418-889-2002 (Fax 418-889-2012) Charles Potvin

5" Lucas #542B120, 10-1220 RPM, 60"x 122"tbl, 96"X, 96"Y, H/W, 25 HP, 1967, #15055

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Lucas #542B120, 1200 RPM, 48"x 110"tbl, 96"X, 60"Y, #50, 20 HP, 1955, #15256

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Lucas #542B120, 56" x 122", Digital Readout, #50 Taper, Power Draw Bar

Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Fax 216-741-8995) F. Petitt

5" Lucas #542B60, horizontal boring mill, 4-way, 86"x 48"table, 20 HP, #7067

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

5" Lucas #542B-60, 48"x 74"table, tailstock, 1956

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" Lucas #642B60, mill,#7 MT,26 speeds,9-1200 SPM,36"str,table,stock #15659

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

5" Lucas, mill, 98" x 41" table, 120"X, 72"Y, 10-120 RPM spindle speed range

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Matt Crull

5" Union #BFT125, HBM, rotary, tailstock, facing, #50 spindle, 1974

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

5" Union #BFT130/6, 55"x63"R/T,78"X,78"Y,900 RPM,No.50,facing hd,pendant,25 HP,#15426

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5" Union #BFT-130-5, facing head,50 taper,55"x63"tbl,110"x,63"y,49"z,#2220

Technical Machine Sales Inc, Longview, TX 903-753-1955 () Craig Cave

5" Universal Boring Machine Co., 40"x 58"tbl,10 HP,outboard support,10-1300 RPM

Wheeler Machinery Sales, Huntington Park, CA 888-589-6721 (Fax 323-589-6199) Dan Wheeler

5" Wotan #B130L, 50"x79"table,#50,DRC 3-Axis DRO,PDB,pendant ctrl,20 HP,#4880

IA Machinery Co, Huntington Park, CA 323-587-1887 (Fax 323-587-1811) Rick Kruger

5.1" Wotan #B130S, 100"X,80"Y,30"Z,48"W,1250 RPM,79"x79"tbl,#50 tpr,PDB,DRO,1970

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-9876) Spencer Minns

5.12" IVO Lola Ribar #HBM-5, Boring Mill,87" cr. tvl.,63" long.,79" vert.,50 taper, 1998

Rise Tek Inc, Brampton, ON 905-487-3464 (Fax 905-487-3465) Kulwant Chalotra

5.12" Ivo Lola Ribar, 79"x72"r/tbl,#50,86"cr,80"vt,60"in/out,39"spdl,DRO,late 90's

Girard Machinery Sales, Minesing, ON 705-722-8128 (Fax 705-722-6897) Guy Girard

5.12" Wotan #B130L, 70"X,63"Y,50"x79"tbl,1k RPM,#50 tpr,Sony RO,25HP,'75,#22542

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

5-1/8" Wotan #B130L, 60"x118"table,108"X,70"Y,#6 MT,R/T,F/H,25 HP,1972,#15454

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

5-1/8" Wotan #B130S, hard-ways, 79"x 71"table, #50 taper PDB, 78"Y , 96"X, 1984

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

5.25" Scharmann #FB500, #50 tpr,77x48x68",48x56"r/tbl,facing hd,Heidenhein DRO,'67

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

5.37" Cincinnati Gilbert, 60"x 112"tbl,72"x60"x40",50MMT,PDB,15-1500 RPM (1108)

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Fax 256-831-2207) W Robert O'Neal

5.37" Cincinnati Gilbert, 60"x 112"tbl,72"x60"x40",50MMT,PDB,15-1500 RPM,#1108

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Fax 256-831-2207) W Robert O'Neal

6" Forest Line 5-Axis HBM,Fanuc 15M,#50,2k RPM,158"x102"x70.8"x19.69",50 ATC,'93

Machinery Works Inc, Saukville, WI 262-284-5611 (Fax 262-284-5613) Adam Wescott

6" G & L #70-H6-T, 72"x120"tbl,108"X,120"Y,#50,1120 RPM,new elect,1979,#15269

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Fax 713-462-8222) Sales Dept.

6" G & L #70-H6-T, 108"X,84"Y, 60"x 120"table, Pendant control, 3-Axis DRO, #22898

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" G & L #70-H6-T, 84"X,84"Y,48"Z,48"x 84"table,ball screws,40 HP,1971,#22342

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Terry Lashin

6" Giddings & Lewis, HBM, 96"vertical travel, 72"x 156"table, 1964

Belmont Machinery Co, Aurora, IL 630-844-9288 (Fax 630-844-9398) Sales

6" Lucas #6120, 50"x 98", 96"X,72"Y,48"W, #50 taper, Sony DRO, 1962

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax 440-232-5541) T. Wigglesworth

6" Mitsubishi #MQF 150, horizontal boring mill,Incon CNC,137"X,86"Y,30 KW,2000 RPM

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax 773-247-2666) Howard /Steve

6" Stanko #3TC-155A, 55"x55"x63",28 HP,1k RPM,outboard support,built in rotary,'90

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

6.3" HBM #TK6516A,CNC, tbl.type,137"cross,10'vert,milling ram,44000# rotary table

Esco Machine & Supply, Sugar Land, TX 281-277-3726 (Fax 281-277-2891) R.G. Escandon

6.3" Kolomna #2N637F1, boring mill,50 ISO,63"x71"rot.tbl,55"cr.tvl,1000 RPM,30 HP,#B550029

N & R Machine Sales, Navasota, TX 800-245-3194 (Fax 936-825-2679) Randy Nevels

Wotan #B-75T, 3"bar,table type,new 4-Axis Sony DRO on X,Y,Z & W,S/N 58480,1973

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Fax 803-359-6464) Carl Amick

Zayer #KF-5000, univ.,bed type,Fanuc 16M,185x60x47",39.4x197"tbl,rotary w/tlstk,'91

Machinery Works Inc, Saukville, WI 262-284-5611 (Fax 262-284-5613) Adam Wescott

Back to Machinery & Machine Tool listings.

= photo available Spec Sheet

= spec sheet available rfq

= request quote from seller camera

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search