BENDERS, BAR, PIPE & TUBE (Also See CNC Machinery & Equipment)

 Surplus Record
All Types of Fabricating & Chip Machinery
There are 196 listings in this category
File update: Thu, May 22, 2008 02:25 		ORIGINAL SORT Sort by Location
Sort by Date
Advanced Search
1/4"-3/8" Oak #DVBHB, double vertical, 12-tube,69" mandral rods,'84,#SR3499-03  Show photo of item Show item detail Request quote from Seller
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Fax 734-971-9080) Jim Walters
.620" Eaton Leonard #VB50, power carriage & collet,tooling,under power,in stock  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
5/8" Chiyoda #SP10STE, horizontal tube bender, Stk.#17115S  Show photo of item Show item detail Request quote from Seller
Pearl Equipment Co, Nashville, TN 615-383-8703 (Fax 615-297-3463) Si Culp
5/8" DiAcro #6, hydraulic, 1-1/4"steel tube, 5/8"round mild steel, 5 HP, clean, #20073  Show photo of item Show item detail Request quote from Seller
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.
3/4" Lomar #S-1110 Universal, A-B PLC, 1994, (9) in stock, #S26011  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3/4" Pines, schedule 80 steel pipe,hyd.mandrel extractor,dial bend ctrl,'67,#05009  Show photo of item Show item detail Request quote from Seller
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand
3/4" Pines #110, hyd,Sch.80,3/4"cap,1-1/2"OD x .065",non-ferr,stock #50698  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3/4" Pines, horiz, 27 RPM, 5 HP mtr, max.bend.cap.1-3/8"x .065", 1967,Stk.#12481J  Show item detail Request quote from Seller
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
3/4" Pines #3/4, hydraulic, rotary, clock & counter-clockwise, (4) avail., #1635  Show photo of item Show item detail Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
3/4" Pines #3/4, horiz, 10"max.rad, 9'11"max.lgth,180 deg.bend,mandrel extractor  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
3/4" Pines #3/4, Horizontal, 10" max.radius, 9'11" max.length, mandrel extractor  Show photo of item Show item detail Request quote from Seller
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/Mitch
3/4" Pines, horizontal, 10" max.radius, 9'11" max.length, mandrel extractor  Show photo of item Show item detail Request quote from Seller
Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Fax262-635-8808) John Rogers
3/4" Pines, horiz., 10' max.rad., 9'11" max.lgth., 180 Deg., Mandrel extractor  Show photo of item Request quote from Seller
A-1 Industries Co Of WI Inc, Milwaukee, WI 414-763-1930 (Fax 414-763-2328) Gary Hohl
3/4" Pines, 3/4"Sch 80 -1 1/2"x.065",hyd.mandrel extractor,dig.Dial-A-Bend,'89  Request quote from Seller
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/Mitch
7/8" Dieco, auto loading, 7/8" tube, 72" length capacity, 1998, Stk.#8345  Show photo of item Show item detail Request quote from Seller
Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.
1" Addison #DB25ST3, 3-axis CNC Databend,triple radius,mandrel,in stock,1999  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1" Conrac/Leonard Synchromater #412,carr,DOB/POB selector,mandrel,(2) CW/CCW  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1" DiAcro #3, #S27051  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1" Pines #3T, vertical hydraulic bender, 15 HP, 1"tube, #51175  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1" Pines #5T, vert, 1"x .065" steel tube, dual palm cont, 20 HP, (8)avail, #2116  Show photo of item Show item detail Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
1" Pines #5T, vertical hydraulic tube bender, serial #44362, #51181  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1" Pines #6T, vertical  Show photo of item Show item detail Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
1" Wayne Two Side, 2.5"max.bend radius, (2) A-B PLC, 1994, #S26146  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/8" Carson, mandrel extraction, 0-185 degree of bend, 1996 (#50146)  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1-1/8" Pines #1400, 1/2" x Sch.80 pipe, 1982, #S25563  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/8" Pines #1400, LH & RH bending, mandrel, refurbished tooling  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/8" Wallace #1100 Hydra-Pnu.tube bender, .083 wall, hi-spd.bend.drive, tlg.  Show photo of item Show item detail Request quote from Seller
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott
1-1/4" BLM, twin head bender w/shift for 180°on each head,2 hand ctrl,tlg,u/p  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/4" Brookes, vert., 10" str, 9 & 10 position turret degree of bend, (3), #1124  Show photo of item Show item detail Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
1-1/4" DiAcro, hydraulic, horizontal, 9"radius, 280°max.bend, 3 HP, #4126  Request quote from Seller
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey
1-1/4" DiAcro #6, 9"radius, 280° max., tooled, very good, #2747  Show photo of item Show item detail Request quote from Seller
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman
1-1/4" Hilmor #DB32, hydraulic rotary,hydraulic mandrel extractror,extra dies,1988,#15252  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
1-1/4" Lomar #1060, digital control,split die,carriage for PBO & DBB,late model  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/4" Omni-X #X32, digital control for degree of bend etc,mandrel,in stock,1996  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/4" Pedrazzoli Brown #32, horiz.,8-1/2"max.rad,185°,mandrel extractor,#11458  Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
1-1/4" Pedrick #A3, 3/4"bar capacity, (2) in stock, #S26733  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/4" Pines #101, 10 HP, 1-1/4" pipe, good condition  Show photo of item Show item detail Request quote from Seller
Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman
1-1/4" Pines #1400, hand clamping, #7081  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1-1/4" Pines #1400, hydraulic bending machine, 3 HP, 1963  Request quote from Seller
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Fax 724-458-0753) Thomas Noone
1-1/4" Pines #1400, 1/2" Pipe, 8" Max Radius, our stock #9979  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard/Steve
1-1/4" Pines #3T, vertical,hyd.,20 HP,Degree-Of-Bend,palm button,'73-80,#3981  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1-1/4" Pines #3T, vertical, digital dial-a-bend, 1989, (7) in stock, #S22725  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/4" Pines #3T, 1.25"x 0.065"wall,dig.Dial-A-Bend,20 HP,nice,`89 (2)[#526/527]  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1-1/4" Pines #3T, 15 HP, auto 10 sta. turret bend selector, 1962 [ 1080 ]  Show photo of item Show item detail Request quote from Seller
Metro Machinery Inc., Memphis, TN 901-942-3363 (Fax 901-948-5750) Bob Beeson
1-1/4" Pines #3T, .065"wall thickness, Degree of Bend, 1976, (3) Stk.#11657  Show photo of item Show item detail Request quote from Seller
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
1-1/4" Pines #3T,Vert,dig.Dial A Bend type ctrl,20hp,palm buttons,rblt'98,#6705  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1-1/4" Pines #3T, vert, hyd., degree of bend selector, free standing cont, #22253  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1-1/4" x .065" Pines #3T, tube bender, 20 HP, 3100 lb., 3'4" x 7' x 5'4", #2110  Show photo of item Show item detail Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
1-1/4" Pines #3T, Hyd., High Speed, vertical, 10 position degree of bend selector, #22801  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (847-640-0431) Sales Dept.
1-1/4" Pines #3T, Variable Ram Speed, 165 deg. max bend, auto lube, [#769]  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1-1/4" Pines #3T, Vertical Hydraulic Tube Bender (1998)  Show photo of item Show item detail Request quote from Seller
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg
1-1/4" Pines #3-T, standard ctrl,hi-speed,vertical bender,low cost,(6)in stock  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/4" Pines #3T, vertical, digital Dial-A-Bend, 20 HP, 1983, #11478  Request quote from Seller
Niblock Machinery Co Inc, Elkhart, IN 574-264-3177 (Fax 574-264-0325) David A. Bortner
1.25" Pines #3T, Vertical Compression Hydraulic Tube Bender  Show photo of item Show item detail Request quote from Seller
Smith Machinery Co, Ames, IA 515-233-6330 (515-232-9411) Jim Smith
1-1/4" Pines #5T, vert., hyd., 20 HP, palm buttons, Degree-Of-Bend,'79,#5965  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1-1/4" Pines #5T, digital control,hi-speed,vertical bender,under power  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/4" Pines #5T, vertical, hydraulic, 20 HP, palm buttons, degree of bend, 1975  Show photo of item Show item detail Request quote from Seller
S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns
1-1/4" Pines #5T, hyd. vertical tube bender, 1000 bnds/hr., rebuilt 2000 (5459)  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
1-1/4" Pines #5T, vertical, digital Dial-A-Bend, 1987  Show photo of item Show item detail Request quote from Seller
Kingsmen Machinery Co, Burnsville, MN 952-890-2419 () George Stensgard
1-1/4" Pines #5T, vertical, 2-tubes @ once, Digital Dial-A-Bend, 1988 [#766]  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1-1/4" Pines #5T Vertical, 2 tubes @ once, 1989, (2) in stock, #S24330  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/4" Pipe #UNI-60, 2"x 11 ga.w,180°,220 V,1 ph,pln-o-bend,bend length,like new,2005  Show photo of item Show item detail Request quote from Seller
Lakeshore Machine Tool LLC, Racine, WI 262-635-8801 (Fax262-635-8808) John Rogers
1-3/8" Pines #3/4, extractor, PLC rebuilt in 2000, (3) in stock, #S24631  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-3/8" Pines #3/4, hyd., mandrel extractor, degree of bend selector, #22259  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1-3/8" Pines #3/4 Hor, hyd.mandrel extr.,6 sta.turret depth stop,1989,#6970  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1-3/8" Pines #6T, .065",vertical,tooling,test run,4.5"centerline radius,#2091  Show photo of item Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
1-1/2" Chiyoda #SP40ST, 3-axis CNC, 1994, #S25060  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/2" Chiyoda #SP40ST, 3-axis CNC, dual radius, 1994, #7260  Show photo of item Show item detail Request quote from Seller
Universal Press & Machy Inc, Clinton Township, MI 586-569-0150 (Fax 586-569-0103) Jim/Tris/Phil
1-1/2" Clark & Lewis #CL200, split die actuator, 14' stop table,new 1990,Tag #14810  Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
1-1/2" Clark & Lewis #CL200, split die actuator,16' stop tbl,new,1990 ,Tag #14811  Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
1-1/2" Clark & Lewis #CL200, split die actuator,14' stop tbl,new 1990,Tag #14812  Request quote from Seller
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Fax 574-295-3660) Robert Yeoman
1-1/2" DiAcro Hydra-Power #6, 6-12 RPM bend speed, 1000 psi (25485)  Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
1-1/2" DiAcro #8, Horiz, hydraulic bender, 3 HP (8412)  Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
1-1/2" Eaton Leonard #VB150GPL, extractor, Premier CNC, 1995, #S26032  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/2" Eaton Leonard #VB150GPL, CNC Tube Bender, 195° bends, new 1995 [#966]  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
1-1/2" Eaton Leonard Vectorbend, pipe and tube bender, #51186  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
1-1/2" IBP #40, hyd, 10" max radius, 7-1/2 hp, our stock #9980  Show photo of item Request quote from Seller
Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard/Steve
1-1/2" J.A. Richards #10P, 1.5" round, 1" square  Request quote from Seller
Concord Industries Inc, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/Jason K.
1-1/2" Langbow #SM38, .080"thick,7"center line radius,like new,2000,#3693  Show photo of item Show item detail Request quote from Seller
Diamond Jack Machinery Inc, Fort Smith, AR 479-785-2554 (Fax 479-785-4362) Jack Yancey
1-1/2" Leonard #PBOT Pneumatic Bendmaster, 10 pos.DOB,mandrel ext.,dies  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
1-1/2" PHI #420, portable, mandrel extractor, right/left bend, 10'tubing lgth,'99  Request quote from Seller
Don Lewis Machinery & Equip, Thousand Oaks, CA 805-987-4160 (Fax 805-987-4170) Don Lewis
1-1/2" Pines #1, extractor, wiper, PDA, warranty, Can Be Rebuilt  Request quote from Seller
Ultimate Tube Bender Parts Pl, Brighton, MI 810-844-0233 (Fax 810-844-0234) Dave Ulrich
1-1/2" Pines #1, mandrel,updated pressure & clamp,die holders,tight machine  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/2" Pines #CNC040, CNC, 1997, #S26981  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-1/2" Pines #MNC040, 3-axis,CNC,Pines Adaptive touchscreen ctrl,PDA,mandrel,'97  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
1-1/2" Richards #2M, Hydraulic, flats/rounds/square/tubing, mounting plate, #23393  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (847-640-0431) Sales Dept.
1-1/2" Richards #8, 1.5" x 16 ga. round, 24"max. radius, 1980  Request quote from Seller
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg
1-1/2" Swade-Sir #21BH, hydraulic draw bender, nice  Show photo of item Request quote from Seller
Red Star Machinery Sales & Au, Barling, AR 479-996-0118 (Fax 479-996-0100) David Lee
1-1/2" YLM #NC38, sgl.bend pipe bender, NC touch screen control, central lube, new 2003  Show photo of item Show item detail Request quote from Seller
Gladwin Machinery & Supply Co, Minneapolis, MN 763-259-4127 (Fax 763-574-1422) Todd King
1-3/4" Pines #1, hyd.mandrel extractor,7/8"rounds,3/4"square,late 1960's (3)  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
1-3/4" Pines #1 Extractor, pressure die assist,Plane of Bend,DOB,1981,(3) #S23662  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
1-3/4" #RDB100, man.rot.draw tube/pipe bender, 1-3/4" tube cap, max.7" clr.(photo)  Request quote from Seller
Inter-Plant Sales, Hopkins, MN 952-931-1155 (Fax 952-931-1246) David Canniff
2" Adaptive Motion #EB503-SD, Haven 24'feed, 5-axis CNC, 1999, #S24514  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
2" Baileigh #RDB-175, rotary draw bender, new, inexpensive, #79368  Request quote from Seller
Southern Minnesota Mchy Sales, Dodge Center, MN 800-770-5638 (Fax 507-374-6824) George
2" Clarke & Lewis #CL200, tooling,NC control,mandrel extractor,PDA,1989 [#341]  Show photo of item Show item detail Request quote from Seller
Highland Machinery LLC, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski
2" Clarke & Lewis #CL200, digital ctrl,PDA,left hand,MAN,carriage,2 hand ctrls  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
2" Clarke & Lewis #CL200, digital ctrls,pressure die assist,left hand mandrel  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
2" Colson, horizontal, hydraulic, misc. tooling, 40 HP, cheap  Request quote from Seller
Machinery Sales Company Inc, Memphis, TN 800-932-8376 (Fax 901-526-2339) D. Williams
2" Conrac #163SPEC, hyd.mandrl.extr,deg.of bend,ped.ctrl,7.5HP,Ser.#68-120,#8127  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
2" Conrac Synchro #220-RH, hyd.,hyd.mandrel extractor,Synchro ctrl,1984,#8976  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
2" Criterion #50000, hyd., compression type, single head, 1998 (2)  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
2" Eaton Leonard #VB200HP, extractor, EL2000 CNC, in plant, 1989, #S27030  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
2" Greenlee #555 Sidewinder Bender, 1/2-2"cap. EMT/IMC/Ridgid, ser.#PL-20134-1  Show photo of item Show item detail Request quote from Seller
Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford
2" Greenlee #884/555/881, for conduit, wire pullers, many to choose  Show photo of item Request quote from Seller
McRae Equipment, Little Rock, AR 501-378-0241 (Fax 501-378-0020) Jeff McRae
2" Leonard #60, horizontal bender, govt. surplus, nice  Show photo of item Request quote from Seller
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (256-536-1322) Ron Hardy
2" Metalpro #MP9000, hydraulic, 12 ton capacity, tube and pipe bender, #20613  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (847-640-0431) Sales Dept.
2" Miic #50RLS, 3-axis CNC, double radius, mandrel, pressure die assist  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
2" Ming Jen #MJ-NC-50, 10 pos.DOB,mandrel ext.,misc.dies,clockwise rotation  Show photo of item Show item detail Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
2" Pedrick #A5, 1.5"bar capacity, 1993, (2) in stock, #S26732  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
2" Pedrick #A6, rotary compression bend.machine,1-3/4"bar cap.,2-3/8"tube x .218  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
2" Pedrick #C, 4" I beam cap., Easy Way, 6" diameter roller, #22603  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
2" Pines #107 5D 54, mandrel extractor,2"-12"max.radius,7.5 HP,6k RPM,lube,1954,#15090  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
2" Pines #2, mandrel extractor, degree of bend, 7-1/2 HP, 1954  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
2" Pines #20T, vert., 2" x .083" steel tubing max.cap, 20 HP, (6) available, #1111  Show photo of item Show item detail Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
2" Pines #20T, vert, 20 ton, 20 HP, bends 1/2"-2"OD pipe, 165°, bargain, #SR2245  Show photo of item Show item detail Request quote from Seller
Alma Machinery Co Inc, Ann Arbor, MI 734-971-8860 (Fax 734-971-9080) Jim Walters
2" Pines #20T, 20 ton, vertical, 20 HP, 1954, 18245  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
2" Socco #SB50NCMP, touch screen cont,hyd,collet,PDA,MAN,wiper die tlg,new 2004  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
2" Swade-Sir, power pipe bender, 3/8" to 2", nice  Show photo of item Request quote from Seller
Red Star Machinery Sales & Au, Barling, AR 479-996-0118 (Fax 479-996-0100) David Lee
2" Wallace #15-3427, 4 roll, 8"dia. of rolls, 3 HP 23/460 3 ph, ctrl stat., 12066j  Show photo of item Show item detail Request quote from Seller
Timco Inc, Columbia, TN 931-381-1900 (Fax 931-381-5151) Kris Irvin
2" Wallace Coast #2RD1-BB, hyd.buss bar, draw type,195 DOB,bi-dir,1996,#8821  Request quote from Seller
Don Lewis Machinery & Equip, Thousand Oaks, CA 805-987-4160 (Fax 805-987-4170) Don Lewis
2" Soco #SB50-NCMP Multi-axis CNC Tube Bender, 2006  Show photo of item Show item detail Request quote from Seller
Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg
2-1/4" Pines #24T, vertical, 8900 lb. weight, 1970, 18248  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
2-1/4" Pines #25T, vertical, 25 ton, 20 HP,tooling,low price,1967 (2),Stk.8247  Show photo of item Show item detail Request quote from Seller
Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.
2-1/4" Pines #25T, vertical, 30 HP motor, hydraulic pump, 1969, #1284  Show photo of item Show item detail Request quote from Seller
Universal Tube & Rollform, Perrysburg, OH 419-872-2364 (Fax 419-874-2825) Sales Dept.
2-1/4" Pines #25-T, digital control,hi-speed,vertical bender,tooling,in stock  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
2-1/4" Teledyne Pines vert.comp.hyd.press bndr,2.25"x.125"pipe tube dia.x wall,25HP(24719)  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
2-3/8" Pedrick #MA-7, 2" extra heavy pipe, radius die & roller, 5 HP, #23571  Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
2-1/2" Chiyoda #SP-60ST, extractor, dual radius, 3-axis CNC, 2000, #S25463  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
2-3/4" Pines #1-1/4, 5' base extension, holders, tooling, 1976, Stk.#8151  Show photo of item Show item detail Request quote from Seller
Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.
2-3/4" Pines #1-1/4, split die actuator, 1984, #S24095  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
2-3/4" Pines #1-1/4, hydraulic mandrel extractor, degree of bend selector, #23408  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (847-640-0431) Sales Dept.
3" American Machine #ET2000, tube bender, #51188  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3" Clark & Lewis #CL300,Degree/Plain-A-Bend,mandrel ext.drop away clmp,'87  Show photo of item Show item detail Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3" Crown #RDB76-E, CNC, 2002, #S27129  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3" Eagle #EPT-75MR, horizontal, CNC, mandrel extractor, stacked tooling, 1993  Show photo of item Show item detail Request quote from Seller
Planet Machinery Co, Pontiac, MI 248-335-8330 (Fax248-335-3680) Ken/Chris
3" Eaton Leonard #VB300, Premier control, 2002  Show photo of item Request quote from Seller
D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
3" Eaton Leonard #VB300, stackable tools, Premier controls, 1998  Show photo of item Request quote from Seller
D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
3" Eaton Leonard #VB300HS, extractor,Premier 3-axis CNC,1995,(3)in stock,#S25492  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3" Eaton Leonard #VB300HS, CNC control, pressure die assist, 195 deg.bends [#964]  Show photo of item Show item detail Request quote from Seller
North American Machy Sales, Philadelphia, PA 800-422-0123 (Fax 2153334112) Hyman/Putney
3" Eaton Leonard #VB300HT, bender, 1998, stock #51635  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3" Eaton Leonard CNC Tube Bender, Nice  Show photo of item Request quote from Seller
Affordable Machinery, Grand Rapids, MI 616-293-6307 () David Dimond
3" Pines #2, hyd.mandrel extractor,Dial-A-Bend,auto lube 7-1/2HP,s/n# 107-5d-56-2654,#6548  Show photo of item Show item detail Request quote from Seller
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Fax 626-443-9588) Adam Mattes
3" Pines #2, horizontal, Comptrol CNC control, tooling [11905]  Show photo of item Request quote from Seller
N S Machine Corp., Ankeny, IA 515-964-1290 (Fax 515-964-7484) David Bryan
3" Pines #2, LH,PDA,man.extractor,slide lube,new clmp.die hold/Sierra dig.ctrl.  Request quote from Seller
Ultimate Tube Bender Parts Pl, Brighton, MI 810-844-0233 (Fax 810-844-0234) Dave Ulrich
3" Pines #2, mandrel extrator, 12" max radius, CW,Ser. 11230-65547 (#50592)  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
3" Pines #2, 5'base extension,mandrel,tooling,left-hand,refurbished,in stock  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
3" Pines #2, mandrel extractor, counter clockwise (2)  Show photo of item Request quote from Seller
D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey
3" Pines #2, horizontal bender, Dial-A-Bend control, govt.surplus  Show photo of item Request quote from Seller
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (256-536-1322) Ron Hardy
3" Pines #2RH, Can Be Rebuilt  Request quote from Seller
Ultimate Tube Bender Parts Pl, Brighton, MI 810-844-0233 (Fax 810-844-0234) Dave Ulrich
3" Pines #30-T, digital ctrl,hi-speed,vertical bender,under power,(3) in stock  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
3" Wallace #502-2, hydraulic tube bender, 13' length  Show photo of item Show item detail Request quote from Seller
Mauldin Machine Inc, North Little Rock, AR 501-835-5494 (Fax 501-835-5499) Jerry Mauldin
3-1/2" Addison #DB89ST3RH, BendPro G2,3 position bed shift,mandrel PDA,refurb.  Request quote from Seller
AM Industrial, Cleveland, OH 888-325-5738 (Fax 216-433-4008) Curt Wyman
3-1/2" Conrac #720, counter clockwise,hyd.madrel extractor 18'tube length  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
3-1/2" Pines #2, extractor Dial-A-Bend,split die act.,1999,(4)in stock,#S23841  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
3-1/2" Pines #2, hyd.,digital Dial-A-Bend control,assortment of dies, #22256  Show photo of item Show item detail Request quote from Seller
Kempler Industries Inc, Elk Grove Village, IL 847-640-8600 (Fax 847-640-0431) Sales Dept.
3-1/2" Pines #2 hor, CCW, Dial-A-Bend, tooling, 1974 (7747)  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
4" Pedrick #D15, 15HP,selection of dies to choose from to 72"dia. inspect u/power  Request quote from Seller
Stanley Machinery Corp, Agawam, MA 413-786-1300 (Cell413-5636606) Stan or Max Cohen
4" Pines #MNC100, CNC, 1999, #26501  Request quote from Seller
Machinery Network Inc, Los Angeles, CA 310-826-4440 (Fax 310-826-2320) G.Treisman
4" Wallace #462, ram style, Serial #016221  Show photo of item Request quote from Seller
Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein
4" Wallace #604, counter clockwise,set up to bend flat bar mild steel 1"x6"  Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
4.5" Addison #DB120, .335"wall, 4-axis CNC, 1999, #S26824  Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
4.5" Schwarze-Wirtz #CNC100HD, Robitec-4", hor,hyd,3-X cont,19.7' tube (25417)  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
4-5/8" Wallace #500-4-5/8", rotary style, Serial #5181-1  Show photo of item Request quote from Seller
Universal Metalworking Equip., Houston, TX 713-675-4145 (Fax 713-675-1294) M. Feinstein
5" Coast Wallace #500-3,hyd.mandrel ext,die oscillation,pressure die booster,rblt  Show item detail Request quote from Seller
Century Machinery Co, Los Angeles, CA 213-627-2847 (Fax 213-627-2499) Leon Dietch
5" Greenlee #784, bends 5" conduit one shot  Request quote from Seller
McRae Equipment, Little Rock, AR 501-378-0241 (Fax 501-378-0020) Jeff McRae
5.25" Wallace #604, 4"Schedule 80 pipe, tooling, low price, #S25243  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
6" Greenlee #784, bends 6" conduit one shot  Show photo of item Request quote from Seller
McRae Equipment, Little Rock, AR 501-378-0241 (Fax 501-378-0020) Jeff McRae
6" Pines #4, 1978, #S24389  Show photo of item Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
6" Wallace #606-90, hydraulic, bends 4 x 7 solids, 7.5 HP, Ser.2033-1  Request quote from Seller
WINN/DIXI Machine Tool Sales, Rockford, IL 815-874-4771 (Fax 815-874-8980) Dick Crosby
8" Coast / Wallace #6RD, mandrel extractor, 1985, #S25837  Show item detail Request quote from Seller
Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.
10" Pines #3/4, rotary,mandrel extract,10"max.radius,10 position deg.of bend,1989  Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
14" B & W, hydraulic, 14" O.D. x .750" wall (3712)  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
14" Coast #14RL, hydraulic, 195, Accu-Bend, 100 HP, 1974 (3697)  Show photo of item Show item detail Request quote from Seller
Harris Machine Tools, Inc., Houston, TX 877-462-5800 (Fax 713-462-8222) Sales Dept.
30" Dreis & Krump folder brake, 30"width, 1997, (19894)  Show photo of item Show item detail Request quote from Seller
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax 513-771-5120) Mr.Secord
Coast #6RD Hyd.Bender, 8" OD x.083 w/carbon steel tube, 30 HP, 1800 RPM, 1985  Show photo of item Show item detail Request quote from Seller
Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad
DiAcro #6, 5/8"solid bar, 1-1/4" x 16 ga.mild steel tube, 3 HP (7940)  Show photo of item Show item detail Request quote from Seller
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David
Eaton Leonard #PB-X, mandrel bender, Stk. 2548  Show photo of item Request quote from Seller
R Jorgenson Company, Salt Lake City, UT 801-493-0151 (Fax 801-493-0157) Kyle Jorgenson
Euromac #PB-350, horizontal bender, 35 ton, s/n #2520589  Request quote from Seller
Raymond Robert Ltd, Saint-Hubert, PQ 450-676-2328 (Fax 450-676-0764) Gilles Tremblay
Pedrick #A5, controls, both arms with rool & block, tooling, IUP, excellent  Request quote from Seller
Stanley Machinery Corp, Agawam, MA 413-786-1300 (Cell413-5636606) Stan or Max Cohen
Pines #14T, vertical hydraulic bender, s/n #44810-78028, #51491  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
Pines #14T, vertical hydraulic bender, #51187  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
Pines #2, 12" max.rad, dig.Dial-A-Bend, split die actuator,pwr.car,new 2000,#12779  Show photo of item Show item detail Request quote from Seller
Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo
Pines #2, CNC, Updated In 2007 all new adaptive controls/touch screen interface  Show item detail Request quote from Seller
Inter-Plant Sales, Hopkins, MN 952-931-1155 (Fax 952-931-1246) David Canniff
Pines #2 benders, vertical  Request quote from Seller
RH Phillips Equipment, Shelby, OH 419-342-2860 (Fax 419-342-2846) Glenn Phillips
Pines #3/4, rotary,mandrel extract 11 position deg.bend,27 RPM bending arm,1976  Show photo of item Show item detail Request quote from Seller
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher
Pines #3T, vertical hydraulic bender, 1980, stock #17174  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
Pines #3T, vertical hydraulic bender, serial #44361-83143, #51192  Show photo of item Show item detail Request quote from Seller
Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales
Roto-Die #1