Surplus Record Machinery

GEAR INCREASERS, Without Driving Unit

Browse: Machinery Electrical

Electric & Power >

Gear Increasers >

Gear Increasers, Without Driving Unit

GEAR INCREASERS, Without Driving Unit

There are 22 listings in this category
File update: Tue, Jun 18, 2013 01:23

Advanced Search

Sort by:

Original Sort

200 HP @ 3550 RPM input, 8226 RPM output, Sundyne standard thrust rblt,vert.inline

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

300 HP @ 1750 RPM input, 12000 RPM output, "Cotta" Offset par

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

350 HP @ 802 RPM input,3710 RPM output,Pacific Western #115HS90,4.6286:1 ratio (2)

Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales

400 HP @ 3550 RPM input, 14700 RPM output, Sundyne,vert.inline,high thrust,new

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

425 HP @ 805 RPM input,3824 RPM output,Pacific Western #140HS100,4.75:1 ratio (4)

Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales

510 HP @ 1200 RPM input, 1800 RPM output, Alamo speed increaser, s/n: APC-5001

Hawthorne Power Systems, San Diego, CA 858-974-6840 (Fax 858-974-6819) Mark Reza

650 HP @ 1200 RPM input, 4100 RPM output, Westinghouse

Belyea Company Inc, Easton, PA 610-515-8775 (Fax 610-258-1230) Shepard Belyea

700 HP @ 1780 RPM input, 1975 RPM output, Falk, 1.109:1 ratio (3)

Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales

1000 HP @ 1200 RPM input, Western #4112-HS, 3.05:1 ratio

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Jay Osmon

1028 HP @ 1770 RPM input, Western #2109-MS, 2.388:1 ratio

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Jay Osmon

1100 HP @ 1200 RPM input, 4560 RPM output, Westinghouse, 3.81 ratio, new

Pump & Motor Works, Okmulgee, OK 918-752-0309 (Fax 918-752-0310) Sales

1150 HP @ 1785 RPM input, 4515 RPM output, Western Gear #115-HSA-70, pll shaft, horizontal (#1270820)

Plantex Equipment Co, Stafford, TX 713-723-9181 (Fax 713-723-9048) Steve Kay

2000 HP @ 1800 RPM input, Synchrodrive Philadelphia #H100

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

2800 HP @ 1750 RPM input, Western, 5360 RPM output, 3.0667 all access, new

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

3300 HP @ 900 RPM input, Western #11611, 3.971:1 ratio

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Jay Osmon

3500 HP @ 3549 RPM input, Philadelphia #105MHS, 1.744:1 ratio

Power Zone Equipment, Center, CO 719-754-1981 (Fax 719-754-1982) Jay Osmon

4311 HP @ 1782 RPM input, 6910 RPM output, Lufkin gear increaser

East Coast Electrical Eq.Inc., Youngsville, NC 919-562-8122 (Fax 919-562-7627) Pearce/ Boykin

5000 HP @ 1200 RPM input, Lufkin, N2102C, 2.758-1 Offset

Florida Drives & Gear Motors, Tampa, FL 800-749-7112 (Fax 813-878-2045) Mike Lubov

19625 HP @ 4860/10585 RPM, General Electric #S458 form A

Keene Turbomachinery Services, Baytown, TX 281-427-8800 (Fax 281-427-0427) Lendell Keene

27500 HP @ 3814 RPM input, Maag, 2.119:1 Ratio, 2.348SF, Used

Merchant Vessel Machy Replace, Wilmington, CA 310-830-0461 (Fax 310-830-8355) V. Richardson

33000 HP @ 4860/10584 RPM, Philadelphia /GE #S458A-LB,2.178:1,compressor dr,new

Keene Turbomachinery Services, Baytown, TX 281-427-8800 (Fax 281-427-0427) Lendell Keene

Westinghouse 191 load gear, 16200 KW @ 4912/900 RPM,5.457 ratio,warehouse spare rblt

Keene Turbomachinery Services, Baytown, TX 281-427-8800 (Fax 281-427-0427) Lendell Keene

Back to Electric & Power equipment listings.

= photo available Spec Sheet

= spec sheet available rfq

= request quote from seller camera

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search