35" x 200" Clausing MA35200 Large Swing Lathe- NEW!      

Asset #: 8436N

Capacity:
Swing Over Bed       34.6"
Swing Over Cross Slide       24"
Swing In Gap       53"
Gap Width From Headstock       23.6"
Center Height Over Bed       17.3"
Center Height From Floor       44.07"
Center Distance       200"
Max. Weight Between Centers       8,800 Lbs.
Max. Weight With Steady Rest       11,000 Lbs.
Max. Unsupported Weight In Chuck 5,500 Lbs.
Small Closed Steady Rest (Optional)      1.5" To 15.75"
Large Closed Steady Rest (Optional)      13.8" To 27.56"
Follower Rest (Optional)       1.5" To 7"
Bed:
Bed Width w/ Std. Auxiliary Guides      22"
Bed Height From Floor       26.77"
Headstock:      
Spindle Bore       12.5"
Spindle Nose       A2-20
Spindle Speed Range       4-Speed Auto Change Variable Speed With CSS
Spindle Speed Range #1       12-85
Spindle Speed Range #2       23-170
Spindle Speed Range #3       55-300
Spindle Speed Range #4       110-400      
Spindle Drive Motor       30 HP Standard
Carriage:
Cross-Slide Travel       26.4"
Compound Rest Travel       17.7"
Tool Post       4-Way, 8 Position w/ T-Slots
Tailstock (Manual):
Quill Diameter       4.5"
Quill Travel       7.87"
Quill Taper       6MT
Bearing Surface On Bed Ways       19.75"
Thread and Feed Range:
Longitudinal Feeds (In/Rev)       0.0018-0.1
Cross Feeds (In/Rev)       0.0009-0.05
Longitudinal Rapid Feeds (In/Min)      80
Cross Rapid Feeds (In/Min)       40
No. Of Metric Threads       60
Range (Mm)       1-56
No. Of Inch Threads       60
Range (TPI)       1/2-28
No. Of Module Threads       60
Range (MOD)       0.25-14
No. Of Diametral Pitch Threads       60
Range (Mm)       2-112
Leadscrew Pitch (TPI)       2
Machine Dimensions & Weight:
Overall Length       283"
Base Width       34.6"
Overall Width       71"
Overall Height       54"
Weight       42,000lbs.
Power       460V, 3P, 60Hz.
Standard Equipment:
Chuck Guard With Limit Switch
30 Hp Motor w/ Inverter Variable Speed Motor
4 Range Auto Change Variable Speed With CSS
Auto Power Off With 2 Adjustable Position Stops
Mechanical Safety Device
Lockable Main Switch
Electrical Cabinet Ventilation Fans
Electromagnetic Spindle Brake
6 Way Rapid Traverse
6 Way Power Feed
4 Way 8 Position Tool Post With T-Slots
2 Dead Centers
Leadscrew /Feed Rod Support
Steel Leadscrew Cover
Coolant System
Auto Lube
Thread Dial
QIK Threading System And A.P.I. Threads
Manual Tailstock With Saddle Pin Body Movement And Anti Slip Lock
Gears And Bed Ways Hardened And Ground
Traveling Splash Guard
Built-In Air Power Supply Tube
Halogen Work Light
Leveling Screws And Pads
Tools, Tool Box, Operation Manual