Sterling Machinery Exchange
9310 Garvey Ave
South El Monte, California 91733-1097
Contact: Adam Mattes
Tel: 626-444-0311
Fax: 626-443-9588
Email: adam@sterlingmachinery.com
  
In the Surplus Record since 1970
Visit our Website: www.sterlingmachinery.com
  
    

AIR COMPRESSORS & ACCESSORIES
AIR COMPRESSORS, DRYERS, REFRIGERATED
19.7 cfm, Ingersoll-Rand #253-D5, type 30, 80 gal.tank, 5 HP, #5887 Camera icon Visit Dealer's Equipment Listing  
100 cfm, 186 psi, Arrow #F100-1, air dryer, 86-186 psi, #A1673 Camera icon Visit Dealer's Equipment Listing  
200 cfm, Ingersoll-Rand #TM-200, air dryer, Ser.#944TM1073, 1994, #9004 Visit Dealer's Equipment Listing  
2700 cfm, Deltech #P550A Pyramid 2000 refrigerated air dryer, 3 HP compressor, Alphanumeric LCD display, #A2829 Camera icon  Visit Dealer's Equipment Listing  

AIR COMPRESSORS & ACCESSORIES
AIR COMPRESSORS, PORTABLE
6.5 cfm, Husky #WL660999AJ, portable air compressor, 5 HP, #8350 Camera icon Visit Dealer's Equipment Listing  
6.5 cfm, Husky #WL660999AJ, portable air compressor, 5 HP, 26 gallon, #8351 Camera icon Visit Dealer's Equipment Listing  

AIR COMPRESSORS & ACCESSORIES
AIR COMPRESSORS, ROTARY SCREW (Positive Displacement)(Also See Compressors)
19.7 cfm, Hill Bros, air compressor, #A2631 Visit Dealer's Equipment Listing  
19.7 cfm, Kellog American #22ITVA, air compressor, 80 gal.tank, 5 HP, #9231 Camera icon Visit Dealer's Equipment Listing  
200 cfm, Gardner-Denver Electra Saver #EAH99A, turn valve rotary screw air compressor, 50 HP, S/A, 66529 hours, #A2825 Camera icon  Visit Dealer's Equipment Listing  

AUTOMATIC SCREW MACHINES & CHUCKERS
WARNER & SWASEY
No. 2AB Warner & Swasey, automatic bar machine, 3" bar feeder, hyd, 3-Jaw hyd.chk, #3346 Camera icon Visit Dealer's Equipment Listing  

BAR FEEDS (Also See Tooling & Accessories, Bar Feeds)
Sameca Colchester Tornado Multisam #MU26.80, automatic barfeed, 1996, #A2289 Camera icon  Visit Dealer's Equipment Listing  

BENDERS, BAR, PIPE & TUBE (Also See CNC Machinery & Equipment)
5/16" DiAcro #1A, hand tube bender, tooling, #A2595 Camera icon Visit Dealer's Equipment Listing  
1-1/2" PHI #210, hyd.tube bender (programmable control), Control-a-Bend, cab-2 digital PLC ctrl, hyd.mandrel extract, 1987, #6786 Camera icon  Visit Dealer's Equipment Listing  
2" Conrac #163SPEC, hyd.mandrel extr, degree of bend, pendant, 7.5 HP, s/n #68-120, #8127 Camera icon  Visit Dealer's Equipment Listing  
3" Pines #2, hyd.mandrel extractor, Dial-A-Bend, auto lube 7-1/2HP, s/n# 107-5d-56-2654, #6548 Camera icon  Visit Dealer's Equipment Listing  
4.5" Conrac Digicon #255-SX, hyd.tube bender, digital programable control, hyd.mandrel extractor, overarm support, 1983, #9622 Camera icon  Visit Dealer's Equipment Listing  

BEVELLING MACHINES
No. X8-37.5 Pullmax, universal shearing & forming machine, adjustable hold down attach w/adjustable rollers, #5557 Camera icon  Visit Dealer's Equipment Listing  

BLOWERS & FANS
BLOWER CYCLONES, COMBINATION
Cincinnati Milacron #10A, blower cyclone combination, #8792 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8793 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8794 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8795 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8801 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8802 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8803 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8804 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8805 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8806 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8807 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8808 Camera icon Visit Dealer's Equipment Listing  
Cincinnati Milacron #10A, blower cyclone combination, #8809 Camera icon Visit Dealer's Equipment Listing  

BORING MACHINES, PRECISION, DOUBLE END
No. 324E Heald, 18" x64" , Bellows air slides, auto lube, 7-1/2 HP, s/n #46517, 1974, #6607 Camera icon  Visit Dealer's Equipment Listing  

BORING MILLS, HORIZONTAL, Table Type (Also See CNC Machinery & Equipment)
3" Scharmann Rheydt #N66145108, table type HBM, Newall DP8, 3-Axis DRO, rotary table, outboard support, #A1812 Camera icon  Visit Dealer's Equipment Listing  
4" Toshiba Shibaura #BT-10B-R, table type HBM, power rotary table (built-in), 3-Axis DRO Camera icon Visit Dealer's Equipment Listing  
5" Giddings & Lewis #350T, 2-axis DRO, outboard support, 25 HP, s/n #5518, #6135 Camera icon  Visit Dealer's Equipment Listing  

BORING MILLS, VERTICAL, Includes VTL's (Also See CNC Machinery & Equipment)
46" King #46, vert.boring mill, 46" 3-jaw chuck, 5 pos.trrt, pendant controls, 50 HP, #A1323 Camera icon  Visit Dealer's Equipment Listing  

BRAKES, APRON & HAND
16 ga. x 10' Chicago #1016, hand apron brake, 2-counter weights, #A3143 Camera icon Visit Dealer's Equipment Listing  
12 ga. x 8' Chicago #182, power apron brake, #9549 Camera icon  Visit Dealer's Equipment Listing  
12 ga. x 8' chicago #S-812, leaf brake, 2-counter weights, #A3527 Visit Dealer's Equipment Listing  
3/16" x 8' Chicago #PB-8187, power apron brake, mechanical, manual ram clamp, push button controls, 5 HP, #A2746 Camera icon Visit Dealer's Equipment Listing  

BRAKES, BOX & PAN
16 ga. x 1' DiAcro #12, hand manual box & pan finger brake, box fingers, hardend die steel, 2 adjustable stops, #A2394 Camera icon Visit Dealer's Equipment Listing  
15 ga. x 4' Shop Fox #M1049, stand, 16-steel fingers: (5) 2" , (5) 4" , (6) 3" , #A3450 Camera icon Visit Dealer's Equipment Listing  
16 ga. x 8' Whitney #816, combination hand brake, 2-counter weights, #A3001 Camera icon Visit Dealer's Equipment Listing  
14 ga. x 3' Chicago #L30, box & pan metal finger brake, 2-counter weights, stand, extra fingers, #A2932 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 6' Chicago #62, power box & pan brake, air clamping, 12 fingers, #A3436 Visit Dealer's Equipment Listing  
Enco #130-5215, bench hand brake, #A3273 Camera icon Visit Dealer's Equipment Listing  

BRAKES, PRESS (GAUGES)
16 ga. x 10' Roto-Die #10, brake press, hydraulic bender, front support, 3-way die, top die, #9234 Camera icon  Visit Dealer's Equipment Listing  
14 ga. x 18" Whitney Jensen #247, mechanical press brake, foot pedal, stand, #8459 Camera icon Visit Dealer's Equipment Listing  
14 ga. x 18" Whitney Jensen #247, mechanical press brake, foot pedal, stand, air clutch & brake, dual palm control, #A3342 Camera icon  Visit Dealer's Equipment Listing  

BRAKES, PRESS (TONS) (Also See CNC Machinery & Equipment - Brakes, Press)
15 Ton, Chicago #135, 4' OA, press brake, ram adjustment, mech.clutch, rear operated manual back gauge, #7285 Camera icon  Visit Dealer's Equipment Listing  
15 Ton, Niagara #IB-15-3-4, mech, 4' OA, elec.ft.pedal, manual ram adj, motor ctrl.w/reversing feature, stroke indicator, #A3324 Camera icon Visit Dealer's Equipment Listing  
20 Ton, Wysong #H-2072, hydra-mechanical press brake, 6' OA, Triad light curtains, counter balance on ram, manual ram adj Camera icon Visit Dealer's Equipment Listing  
25 Ton, Chicago #265, mechanical, 6' OA, FOMBG, foot treadle, #A3107 Camera icon Visit Dealer's Equipment Listing  
25 Ton, Chicago #285, press brake, 8' OA, front operated manual back gauge w/indicator, air trip mechanical clutch Camera icon Visit Dealer's Equipment Listing  
25 Ton, Chicago #285, mech.press brake, 8' OA, FOMBG w/indicator, manual ram adjust, one shot lube system, foot treadle, V/S, #A2760 Camera icon  Visit Dealer's Equipment Listing  
25 Ton, Niagara #1B-25-5-6, mech, 6' OA, manual ram adj, One-Shot lube, foot treadle, #A3323 Camera icon Visit Dealer's Equipment Listing  
25 Ton, Verson #1062, press brake, 6' OA, rear operated manual back gauge, mechanical clutch & brake, foot treadle, 1-1/2 HP Camera icon Visit Dealer's Equipment Listing  
35 Ton, DiAcro #16-96, hydra-mechanical brake press, 8' OA, FOMBG, 2 speed, power ram adj.w/indicator, #9921 Camera icon  Visit Dealer's Equipment Listing  
35 Ton, Wysong #3596, brake press, 8' OA, FOMBG w/ind, 62" BH, #9307 Camera icon  Visit Dealer's Equipment Listing  
40 Ton, Pacific #40-12, hyd., 12' OA, light curtains, tonnage control valve, 123" BH, #9835 Camera icon  Visit Dealer's Equipment Listing  
45 Ton, Allsteel #45-8, hydraulic brake press, 8' OA, ROMBG, dual palm control on ram, #9677 Camera icon  Visit Dealer's Equipment Listing  
45 Ton, Atlantic #HDE45-5, hydraulic press brake, 5' OA, tonnage indicator, rear safety guard, tonnage control, #A2005 Visit Dealer's Equipment Listing  
45 Ton, Atlantic #HDE45-5, hydraulic press brake, 5' OA, tonnage indicator, light curtains, rear safety guard, #A2006 Camera icon Visit Dealer's Equipment Listing  
45 Ton, Atlantic #HDE45-5 / PPM1640, hydraulic press brake, 5' OA, tonnage indicator, rear safety guard, 1992, #A2007 Camera icon Visit Dealer's Equipment Listing  
55 Ton, Chicago #68B, press brake, 8' OA, air trip mech.clutch, FOMBG, Eagle Eye light curtains, power ram adj., #9651 Camera icon Visit Dealer's Equipment Listing  
55 Ton, Niagara #1B36-8-10, 10' OA, air trip mech.clutch, FOMBG, pwr ram adj.w/indicators, elec.foot pedal, #9653 Camera icon  Visit Dealer's Equipment Listing  
55 Ton, Wysong #35-10, 10' OA, ft pedal, 1 shot lube, Comp-U-Bend 610 CNC BG, #A3351 Camera icon Visit Dealer's Equipment Listing  
55 Ton, Wysong #55-8, mechanical press brake, 10' OA, FOMBG w/indicator, pwr.ram adjust, one shot lube system, foot treadle, #A2759 Camera icon   Visit Dealer's Equipment Listing  
55 Ton, Wysong, 10' OA, A/C twin drive Hi-Low speed pwr speed, air clutch & brake, FOMBG w/indicator, motor d ram adj., #3209 Camera icon Visit Dealer's Equipment Listing  
65 Ton, Verson #2010-65, 12' OA, Pneu.dual palm control, air clt., material support, A3350 Camera icon Visit Dealer's Equipment Listing  
65 Ton, Verson #208-65, 10' OA, FOMBG, power ram adj., mechanical, 5 HP, serial #17665, #8175 Camera icon  Visit Dealer's Equipment Listing  
90 Ton, Chicago #810-L, 10' OA, flanges, 18" x 120" T-Slotted 4-post die set, air trip mech.clutch, light curtain, #6980 Camera icon Visit Dealer's Equipment Listing  
90 Ton, Cincinnati #90ASx6, hydraulic press brake, 8' OA, electric foot pedal, die rail, ram tilt control, ROMBG, #A2465 Camera icon  Visit Dealer's Equipment Listing  
90 Ton, Cincinnati #90CB-8, hyd.press brake, foot pedal, stroke control w/indicator, #A3188 Visit Dealer's Equipment Listing  
90 Ton, Wysong #90-10, press brake, 12' OA, FOMBG w/indicator, power ram adjustment w/indicators, auto lube system, #A1712 Camera icon  Visit Dealer's Equipment Listing  
90 Ton, Wysong #90-10, 12' OA, foot pedal, one shot lube, air clutch & brake, #A3378 Camera icon Visit Dealer's Equipment Listing  
90 Ton, Wysong #90-8, mechanical press brake, 10' OA, power ram adjustment w/indicators, 1980, #9525 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Pacific #100-14, 12' 4" BH, 14' OA, #9003 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Verson #TA-510, mechanical press brake, 12' OA, #A2947 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Wysong #THS100-144, 12' OA, hydraulic press brake, STI light curtains, dual palm controls, one shot lube, 126" BH, 1995, #A1045 Camera icon  Visit Dealer's Equipment Listing  
120 Ton, Betenbender #10-120, hyd, 10' OA, FOMBG, digital readout, 3-spd.RAM, #A3117 Camera icon Visit Dealer's Equipment Listing  
135 Ton, Chicago #410-D, mechanical clutch press brake, power ram adjustment w/indicators, foot treadle, die rail, #A2242 Camera icon  Visit Dealer's Equipment Listing  
135 Ton, Cincinnati Series 5, mech, 10' OA, foot pedal, Eagle eye light curtains, #A3235 Camera icon Visit Dealer's Equipment Listing  
150 Ton, Cyril Bath #150-4, heavy duty air trip mechanical press brake, 6' OA, dual palm control, auti-lube sys, FOMBG, #A1986 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, HTC #154-G-20, hyd.press brake, 20' OA, manual depth stop, foot pedal, #A3186 Camera icon Visit Dealer's Equipment Listing  
150 Ton, Pacific #K-150-14, heavy duty hydraulic press brake, 14' OA, 38" deep throat, Micro Switch stroke depth control, #A2981 Camera icon  Visit Dealer's Equipment Listing  
187 Ton, Trumpf #V170 CNC hydraulic press brake, 13' OA, operator control pedestal, light curtains, Trumpf CNC BG, 1999, #A3136 Camera icon Visit Dealer's Equipment Listing  
240 Ton, Steelweld #H3, 16' OA, mech.cl.& brake, pwr.ram adj., auto lube, 10 HP, #4273 Camera icon  Visit Dealer's Equipment Listing  
440 Ton, LVD #PPN400/4500, hyd, 14' OA, lower die hldr, remote palm control, foot pedal, #A3556 Visit Dealer's Equipment Listing  

CHEMICAL, PETROLEUM, GAS & PROCESSING EQUIPMENT
WASTE TREATMENT
Neutralization Tech. Systems #WTB-400, waste treatment system, 20 GPM, #7658 Camera icon Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
BENDERS, BAR, PIPE & TUBE, CNC
5/8" Leonard Conrac #10 Tube Bender, Synchro, auto indexing, mandrel extractor, well tooled, 195 deg.movement, parts machine, #6003 Camera icon Visit Dealer's Equipment Listing  
1-1/4" Pines #1400, hydraulic tube bender, rotary stop, 3 HP, #A1582 Camera icon Visit Dealer's Equipment Listing  
1.5" x .079" CSIA Chiao Sheng #38NC, N/C mandrel tube, pipe & bar bender, hydraulic mandrel extractor, pressure die, #A2246 Camera icon Visit Dealer's Equipment Listing  
1.5" x .079" CSIA Chiao Sheng #CS-A38B, mandrel tube, pipe & bar bender, hydraulic mandrel extractor, pressure die, #A2245 Camera icon Visit Dealer's Equipment Listing  
1-1/2" Pines #1, hydraulic tube bender, hydraulic mandrel extractor, manual hand controls, 7-1/2 HP, #A1076 Camera icon Visit Dealer's Equipment Listing  
3" Eaton Leonard #VB300-GP, hyd.tube bender, 3" x .187" , Vector Bend CNC, #A2791 Camera icon  Visit Dealer's Equipment Listing  
4.5" Conrac Digicon #225-SX, digital prog.ctrl, hyd.manrel extractor, overarm support, 1983, #9622 Camera icon  Visit Dealer's Equipment Listing  
Ying Lin #CR-F38, dbl finishing & dbl end angle bender, foot pedal, tooling, 2 rotary tables, automatic or manual, #A2247 Camera icon Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
BRAKES, PRESS, CNC (Also See Brakes, Press Alphabetical Classification)
35 Ton, DiAcro #16-96, 8' , hydra-mech.press brake, Hurco 5C CNC BG, ISB light curtains, motor ram adj, 2-spd ram, #9469 Camera icon  Visit Dealer's Equipment Listing  
35 Ton, Wysong #H3552, hydra-mech, 2-axis Dynabend, lt.curt, ram adj, flngs, ' 86, #9328 Camera icon  Visit Dealer's Equipment Listing  
35 Ton, Wysong #H3572, hydra-mech, 2-axis Dynabend, lt.curt, ram adj, flngs, ' 84, #9329 Camera icon  Visit Dealer's Equipment Listing  
40 Ton, Wysong #H4096, 8' OA, Hurco 5C, ram adj., 5 HP, serial #HPB17-142, 1989, #8078 Camera icon  Visit Dealer's Equipment Listing  
40 Ton, Wysong #H4096, hydra-mech., 8' , Comp-U-Bend CNC BG, 1 shot lube, elec.foot pedal, 1989, #9649 Camera icon  Visit Dealer's Equipment Listing  
55 Ton, Chicago #68B, 8' OA, Automech G24 control, power ram adj., dual palm, #9088 Camera icon  Visit Dealer's Equipment Listing  
55 Ton, Chicago #810-B, 10' OA, Hurco Autobend IV 1-axis CNC B.G., air clutch & brake, 2-speed ram, #7337 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Auto Sert Flyer #4, CNC hydraulic press brake, 60" OA, Hurco 3-Axis CNC back gauge, STI light curtains, auto lube, #A1680 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Wysong #MTH60-120, CNC hyd, 10' OA, STI light curtain, one shot lube, #A3106 Visit Dealer's Equipment Listing  
88 Ton, Adira #QHA-8025, CNC hydraulic press brake, 8' OA, Automec 2000 2-Axis CNC BG, 81" between housings, 1999, #9811 Camera icon  Visit Dealer's Equipment Listing  
88 Ton, Amada #RG-80, 8' OA, NC9-EXII CNC BG, mag.chk, foot treadle, pedestal control, #A3430 Visit Dealer's Equipment Listing  
90 Ton, Chicago #810C, 10' OA, Automec Autogauge CNC99, motorized ram adj., mech., 5 HP, #8173 Camera icon  Visit Dealer's Equipment Listing  
90 Ton, Cincinnati #90FMIIx6, 8' OA, Form Master II CNC Hyd, 2 Axis CNC BG, 1998, #A3416 Camera icon Visit Dealer's Equipment Listing  
90 Ton, Niagara #1B-60-10-12, 14' OA, mechanical clutch & brake, Hurco Autobend CNC BG, 5 HP, #3741 Camera icon   Visit Dealer's Equipment Listing  
90 Ton, Pacific #J90-8, 8' OA, Dyna Bend III 2-axis, machined for flanges, 15hp, ' 86, #7466 Camera icon  Visit Dealer's Equipment Listing  
90 Ton, Wysong #90-4, 6' OA, CNC BG, A/C & brake, power ram adj., 10 HP, serial #PB53-113, 1980, #5775 Camera icon   Visit Dealer's Equipment Listing  
100 Ton, DiAcro, 10' OA, Hydra-Mechanical CNC, Hurco Autobend 7, curtains, ram adj, #8683 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Niagara #HBM-100-10-12, hyd, 12' OA, 10' 6" BH, adj.stroke, 7" throat, Hurco Autobend 7 3-axis CNC, dual palm control, #A1653 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Wysong hydraulic brake, 10' OA, One Shot lube system, #A2898 Camera icon Visit Dealer's Equipment Listing  
135 Ton, Pacific #J135-10, hyd, 10' OA, Hurco 2-Ax.CNC, ft pedal, emergency stop, #A3013 Camera icon Visit Dealer's Equipment Listing  
155 Ton, Donewell #H155-3000, 10' OA, 3300 CNC, pendant, 10' die rail, 10 HP, 1984, #5221 Camera icon  Visit Dealer's Equipment Listing  
175 Ton, Cincinnati #175-FMII Formaster II, 5-Axis CNC hyd.press w/ext.stroke, #A3044 Camera icon  Visit Dealer's Equipment Listing  
175 Ton, Cincinnati #175-FMII Formaster II, 5-Axis CNC hyd.press w/ext.stroke, #A3045 Camera icon   Visit Dealer's Equipment Listing  
200 Ton, Pacific #K200-12, hyd, 12' OA, Hurco 5C autobend, dual palm control, #A3397 Camera icon Visit Dealer's Equipment Listing  
230 Ton, Cincinnati #230FM-10, 12' OA, Comp-U-Bend 61000 CNC BG control, ft pedal, #A3179 Camera icon Visit Dealer's Equipment Listing  
230 Ton, Cincinnati #230FMII Formaster II, 5-Axis CNC hyd.press w/ext.stroke, #A3046 Camera icon   Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
ELECTRICAL DISCHARGE MACHINES (EDM), RAM (SINKERS) CNC (Also See EDM's alphabetical class)
Elox #8-2012CAC, CNC sinker EDM, 50 amp, Fanuc 11M, 3-Axis CNC control, System 3R head, auto lube sys, 10" riser block, #8848 Camera icon Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
ELECTRICAL DISCHARGE MACHINES (EDM), SMALL HOLE, CNC
Sodick #K1CN, CNC EDM hole popper, 30 amp, 1990, #8851 Camera icon  Visit Dealer's Equipment Listing  
Sodick #K1CN, 30 amp, CNC EDM hole popper, auto.feed, 1992, #8852 Camera icon  Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
ELECTRICAL DISCHARGE MACHINES (EDM), WIRE, CNC
Mitsubishi #DWC110HA, auto thrd, 23.6x26" tbl, Mits.W11HA CNC, Dielectric sys, ' 94, #A1633 Camera icon  Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
GRINDERS, SURFACE, CNC
12" x 24" Chevalier #FSG-1224TXII, hyd, clnt.sys, 12" x24" electro magnetic chuck, #A3122 Camera icon Visit Dealer's Equipment Listing  
12" x 24" Okamoto #CFG-1224NC, Fanuc 15M, EMC, Oilmatic hyd.sys, ' 90, #A3115 Visit Dealer's Equipment Listing  
16" x 36" Camut #Mini 9, heavy duty, electro mag.chk, hyd, coolant, auto infd, #A3099 Camera icon Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
LATHES, COMBINATION, CNC Turning Centers
Bridgeport Romi EZ Path I, CNC Lathe, coolant sys, 3-Jaw Chk, auto lube sys, 1995, #A3124 Camera icon Visit Dealer's Equipment Listing  
Daewoo Lynx #200A, CNC turning center, 1998, #A2211 Camera icon   Visit Dealer's Equipment Listing  
Hes /Toyoda #600 HES, CNC turning center, Fanuc GN10, 24" x 64" cc, programmable hydraulic tailstock, 3-Jaw 15" chuck, #5528 Camera icon Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
MACHINING CENTERS, VERTICAL, CNC Mills
Acroloc #M-12, Actrion CNC, 12 ATC, Bijur lube, spray mist coolant, serial #173, #5469 Camera icon  Visit Dealer's Equipment Listing  
Brother #TC-215, CNC tapping machine center, Brother CNC-400 control, 20" x 9" , #A2529 Camera icon   Visit Dealer's Equipment Listing  
Dah Lih #MCV520, vertical, 20" x 15" , 1986, #6461 Camera icon   Visit Dealer's Equipment Listing  
Fadal #VMC5020A, 88HS CNC, 50" x20" x20" , remote pulse hand control, Bijur auto lube sys., RS 232 port, 4th Axis ready, ' 97, #A2148 Camera icon   Visit Dealer's Equipment Listing  
Mighty Comet Viper #VMC500P, VMC, 20" x15" x15" , Mits Meldas 520A, 16 ATC, 1998, #A3540 Visit Dealer's Equipment Listing  
Pratt & Whitney, 19" x14" x22" , Fanuc Tape Drill Mate, Fanuc 0M, rigid tap, tooling, 1987, #9170 Camera icon   Visit Dealer's Equipment Listing  
Southwestern Industries #LPM, VMC, 31" x18" x21" , Proto Trak PMX, 16 ATC, RS232, #A3539 Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
MILLERS, HYDROTEL, VERTICAL, CNC
Turchan #5-5-36L3P, 21" x90" , 3-D pencil tracer, tracer, hyd.pumping sys., 3/4 HP, #5559 Camera icon  Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
MILLERS, VERTICAL/UNIVERSAL, CNC
Bridgeport EZ-Trak Series I, EZ-Trak 2-Axis CNC control, auto lube, chrome ways, #A2458 Camera icon Visit Dealer's Equipment Listing  
Bridgeport Series I Prototrak, 9" x42" , Chrome ways, Bijurs Auto lube sys, Z-Axis Quill digital readout, Prototrak M2 control, #A3182 Camera icon Visit Dealer's Equipment Listing  
Lagun #FTV-2, 2-Axis CNC vertical mill, 9" x 48" , Mitutoyo Millstar CNC control, Ultron snap change draw bar, drill chuck, #A2208 Camera icon Visit Dealer's Equipment Listing  
Trak #DPM, 10" x50" , 3-Axis, Trak A.General Electric 3 CNC control, Wesco mist clnt.sys, auto lube, #A3482 Visit Dealer's Equipment Listing  
Trak #DPM SX3, 3-Axis vert.bed mill, 10" x50" , ProtoTrak SMX, mist clnt, PDB, 2006, #A3538 Visit Dealer's Equipment Listing  
Trak #DPM V3, vert.bed mill, 10" x50" , Prototrak VM CNC, mist clnt, auto lube sys, #A3483 Camera icon Visit Dealer's Equipment Listing  
Trak #K4S, 2-Axis vertical bed mill, 10" x50" , ProtoTrak SM, mist clnt, PDB, 2003, #A3536 Visit Dealer's Equipment Listing  
Vantage #K4V, 3-Axis CNC vertical milling machine, Anilam Series 1100 CNC control, power draw bar, #40 taper, tooling, #A1963 Camera icon  Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
PUNCHES, SINGLE END, CNC
110 Ton, Geka, sgl end, Fagor CNC control & PAXY CNC plate position.& punch.sys, #A2282 Camera icon  Visit Dealer's Equipment Listing  

CNC MACHINERY & EQUIPMENT
PUNCHES, TURRET, CNC
33 Ton, Amada Vipros #345, Fanuc 04PC, hyd.clutch, brake, ram, 2 A/I, 1989, #8135 Camera icon  Visit Dealer's Equipment Listing  

COATING MACHINES
Barrett #1100, enamel coater & spinning machine, 55 ga., 900 RPM, 3 baskets, 3 HP, 1986, #8531 Camera icon Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
COIL CRADLES
2000 lb. Rowe #2010-PR, powered coil cradle, 10.5" , 40" OD of coil, #A1945 Camera icon Visit Dealer's Equipment Listing  
4000 lb. Durant #4816CC, motorized coil cradle (dbl adjusting), self centering adjust. side plates, side plate rolls, 1 HP, #6397 Camera icon  Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
COIL CRADLES & STRAIGHTENERS
3000 lb. Rowe #B-20/3J, 20" , manual adj., loop arm control, 3 HP, serial #21486, #7754 Camera icon  Visit Dealer's Equipment Listing  
12000 lb. Rowe #C3-20/12J, coil cradle straigthener, .135" x 20" , Eddy electric clutch & brake, electric eye loop control, 5 HP, #6576 Camera icon  Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
FEED LINES
Red Bud double gripper feed line, 50" x 0.060" , 1983, #6984 Camera icon  Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
FEEDERS, AIR
10" x .045" Rapid #J12, air feeder, #3425 Visit Dealer's Equipment Listing  
10" x .045" Rapid #J12, air feeder, #3426 Visit Dealer's Equipment Listing  
12" x .150" Rapid-Air #FX12E, slide stock feeder, mild steel, #3484 Camera icon  Visit Dealer's Equipment Listing  
12" x .156" Plessey #CB-25-12x12R, air feeder, mild steel, 1980, #3562 Camera icon  Visit Dealer's Equipment Listing  
12" x .202" Press Room #S32-12x18R, 1 gripper, A-1 adj.tbl, air filters & regulators, #6578 Camera icon  Visit Dealer's Equipment Listing  
12" x .250" American #ASG1218, air feeder (single gripper), #6010 Camera icon Visit Dealer's Equipment Listing  
12" Coe #CF-150, air feed, #7907 Visit Dealer's Equipment Listing  
12" Coilmatic #1212, air feed, #7909 Camera icon Visit Dealer's Equipment Listing  
12" Cooper Weymouth #XCFA5-1212RH, air feeder, #8207 Camera icon  Visit Dealer's Equipment Listing  
12" Dallas #D200-12x12, air feeder, #8119  Visit Dealer's Equipment Listing  
18" Air Feeds #AF, air feeder, #4766 Camera icon Visit Dealer's Equipment Listing  
36" x .060" Sesco #22-490, air pinch rolls, surge tank, 4 level.jacks, 20 HP, serial #13034-2, #7026 Camera icon  Visit Dealer's Equipment Listing  
48" x .060" Dallas #D250, (4) grippers, pwr.pinch rolls, surge tank, serial #14183, #7027 Camera icon  Visit Dealer's Equipment Listing  
50" x .060" Red Bud #FMB6D50-36, pwr.wdth & hght adj., pneu.clamp, grippers, 15 HP (2), #6983 Camera icon  Visit Dealer's Equipment Listing  
72" B & K Machine, 2 stand feeder, #3593 Camera icon  Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
STRAIGHTENERS, FLAT & SHAPE
6" x .070" Rapid-Air #SCM6, straightener, 1500 lb. pulling capacity, from non powered reel, #A2732 Camera icon Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
STRAIGHTENERS, SHEET & STRIP (Also See Levelers, Roller)
4.7" x .040" Bruderer #12-120-B, precision material straightener, 1982, #3240 Camera icon Visit Dealer's Equipment Listing  
6" x .060" Combination straightener/feeder, #3479 Camera icon Visit Dealer's Equipment Listing  
10" x .095" Rowe #A-10, straightener, manual adjustment, 25-75 FPM, #8842 Camera icon Visit Dealer's Equipment Listing  
12" x .030" Littell #312, straightener feeder, #5843 Camera icon Visit Dealer's Equipment Listing  
18" x .090" Dallas Industries #81923, straightener, pnuematic pinch rolls, #A1227 Camera icon  Visit Dealer's Equipment Listing  
20" x .078" Schubert #WM2-500, parts flattening press, 1970, #9281 Camera icon Visit Dealer's Equipment Listing  
30" x .065" Regal #1030 FSDC, straightener, #5912 Camera icon  Visit Dealer's Equipment Listing  
65" x 25" Durant #MD-25, coil straightener, #5921  Visit Dealer's Equipment Listing  
80" x 15" Rowe #R-15-TC, straightner, #5740 Camera icon  Visit Dealer's Equipment Listing  
93" x 18" Cooper Weymouth #18B, straightener, #5924 Camera icon  Visit Dealer's Equipment Listing  
93" x 18" Cooper Weymouth Series #B18, straightener, #7752 Camera icon  Visit Dealer's Equipment Listing  

COIL HANDLING EQUIPMENT
UNCOILERS, Including Reels, Centering
600 lb. Littell #5, 10" width, hand operated coil reel, #5655 Camera icon  Visit Dealer's Equipment Listing  
600 lb. Littell #5, 10" manual non-pwrd dbl end coil reel, gear lock pin, spindle lock, adjust.friction brake, swivel joint, #A2698 Camera icon  Visit Dealer's Equipment Listing  
2500 lb. American #70, 18" , back pl, 6-keepers, loop cont.arm, man.adj, serial #7713, #8139 Camera icon  Visit Dealer's Equipment Listing  
5000 lb. Cooper Weymouth #500018P, 18" W, man.adj, elec.brake, serial #17323, #7761 Camera icon  Visit Dealer's Equipment Listing  
5000 lb. Cooper Weymouth #CWP-500018M, 18" , manual adj, air brake, serial #2711, #7753 Camera icon  Visit Dealer's Equipment Listing  
5000 lb. Cooper Weymouth #CWP500018M, 18" , manual adj, air brake, grd. motor, serial #2711, #7755 Camera icon  Visit Dealer's Equipment Listing  
6000 lb. Dallas #DCR-6000x24RH, payoff coil reel, 24" , air brake, manual adjustment, #A2644 Camera icon  Visit Dealer's Equipment Listing  
6000 lb. Dallas payoff, 24" width, air brake, (6) keepers, 1997, #8137 Camera icon  Visit Dealer's Equipment Listing  
6000 lb. Regal #SRNP6000-18SD8, 18" payoff coil reel, manual expansion, #A1222 Camera icon  Visit Dealer's Equipment Listing  
10000 lb. American #1000, 36" power reel, manual expansion, back plate, keepers, 5 HP, 12 RPM, 15-1/2" -20-1/2" ID, 60" OD, #A1678 Camera icon  Visit Dealer's Equipment Listing  
10000 lb. Durant #HD10M-1, 36" W keeper arm, 60" OD, 15" -21" ID, air brake, 48" back plate, serial #4907, #3311 Camera icon  Visit Dealer's Equipment Listing  
12000 lb. Rowe #12024DS/L, 24" pwr coil reel, vari-ctrl elec.brake & clutch, 3 HP, #9318 Camera icon  Visit Dealer's Equipment Listing  

DRILLS, GEAR HEAD
Solberga #SEnr10, geared head sliding column drill press w/pwrd down feed, 28" , pwr quill feed, tapping cycle, t-slot tbl, #A1974 Camera icon  Visit Dealer's Equipment Listing  

DRILLS, HEAVY DUTY, MULTIPLE SPINDLE, VERTICAL
12 Spdl., Steinel #BS-140, multi-spindle drill press, 3/16" , #6172 Camera icon  Visit Dealer's Equipment Listing  

DRILLS, HEAVY DUTY, SINGLE SPINDLE, VERTICAL
15-1/2" Craftsman #11324590, floor drill press, 10" x12" table, 380-8550 RPM, 1/2 HP, drill chuck, chuck key, #A3061 Camera icon Visit Dealer's Equipment Listing  
20" Powermatic #1200, table drill press, head elevation mechanism, drill chuck & arbor, #A1526 Camera icon Visit Dealer's Equipment Listing  
22" Alzmetall #AB3ESV, drill press, belt drive, power quill feed, coolant system, #A2221 Camera icon Visit Dealer's Equipment Listing  
22" Solberga #SE725, geared head drill press w/powered downfeed, power quill feed, drill chuck, #A1973 Camera icon Visit Dealer's Equipment Listing  
24" Avey #2-BMA-6, 3 head drill press, #7270 Camera icon  Visit Dealer's Equipment Listing  
24" Cincinnati Super Service, floor press, 29" x 23" table, #4MT, coolant system, #9775 Camera icon  Visit Dealer's Equipment Listing  
24" Cleereman #24, floor drill press, coolant system, 5 HP, 50-1000 RPM, #4MT, #9777 Camera icon  Visit Dealer's Equipment Listing  
24" Fosdick #24, geared sliding head floor drill, #9250 Camera icon  Visit Dealer's Equipment Listing  
26" Barnes #F1097, heavy duty drill press machine, Jacobs drill chuck, #A2477 Camera icon Visit Dealer's Equipment Listing  
28" Cincinnati Bickford Super Service, floor drill, hydraulic feed spindle, 45-1500 RPM, #A1074 Camera icon Visit Dealer's Equipment Listing  
28" Cleereman #28, floor drill press, coolant system, #9778 Camera icon  Visit Dealer's Equipment Listing  
28" Cleereman #28, floor drill press & tapping machine, coolant system, tapping, #A2476 Camera icon Visit Dealer's Equipment Listing  

DRILLS, RADIAL (Also See Tappers)
6' -17" Carlton #4A, radial drill machine, L Shape base, power arm elevation, work light, #A2104 Camera icon Visit Dealer's Equipment Listing  

DRILLS, TURRET (Also See CNC Machinery & Equipment - Drills, Turret)
Burgmaster #2BR, radial arm turret drill press, 3/4" , air hydraulic clamping, tapping head, drill chucks, 440V., 3 ph Camera icon Visit Dealer's Equipment Listing  

DUST COLLECTORS (Also See Blowers & Fans)
288 cfm Rumac Industrial #DS1750, workhorse portable continuous duty explosion proof vacuum, 10 HP, carts & wheels, #9473 Camera icon Visit Dealer's Equipment Listing  
1800 cfm Cat #C-5, wet dust collector, removable front door w/explosion relief, push button starter w/overloads, #A3442 Visit Dealer's Equipment Listing  
2500 cfm Cat #C-5, wet dust collector, removable front door w/explosion relief, push button starter w/overloads, Stainless Steel, #A3439 Camera icon Visit Dealer's Equipment Listing  
2500 cfm Tepco #2500B, air cleaner smog eater, cell & ionizer asseblies, fan, housing cabinet, #A3494 Visit Dealer's Equipment Listing  
2500 cfm Tepco Air Cleaner Smog Eater #2500B, cell & ionizer assemblies, fan, #A3495 Visit Dealer's Equipment Listing  
3200 cfm AAF #1340-H, dust collector (cartridge type), #7179 Camera icon  Visit Dealer's Equipment Listing  
Omega, down draft bench, 4' x 10' , #5129 Camera icon  Visit Dealer's Equipment Listing  

ELECTRICAL DISCHARGE MACHINES (EDM), RAM TYPE (SINKERS) (Also See CNC Section, EDMs)
Elox #12-3816-DR, 100 amp, Astra 100D, in/mm, DRO, 8" x 24" perm.mag.chuck, auto lube, #6743 Camera icon  Visit Dealer's Equipment Listing  

ENGRAVING MACHINES
Deckel #G1L, 2-Dimensional pantograph, 1/4" capacity, Heinrich 150lbs., pneumatic vise w/footpedal, bit, #A3283 Camera icon Visit Dealer's Equipment Listing  
Deckel #GK21, 3-Dimensional pantograph milling machine, 3/8" , pallet of tooling & extra parts, #A2840 Camera icon Visit Dealer's Equipment Listing  
Deckel #KF12, top template drag table, 15-3/4" x 15-3/4" , power elev., 1-1/2 HP, serial #60565, #7581 Camera icon  Visit Dealer's Equipment Listing  
Deckel #KF12, pallet of tooling & extra parts, #A2482 Camera icon Visit Dealer's Equipment Listing  
Deckel #KF12, pallet of tooling & extra parts, #A2483 Camera icon Visit Dealer's Equipment Listing  
Friedrich Deckel #KF1, pantograph machine, #A2484 Camera icon Visit Dealer's Equipment Listing  

EYELETTERS
Air Operated Eyeleting Machine, 1 ton, Ser.#FT911052-A, #3893 Camera icon Visit Dealer's Equipment Listing  

FEEDERS, PARTS
Accu-Count #500, parts feeder, Ser.#156553W, #5605 Camera icon Visit Dealer's Equipment Listing  

FORKLIFT TRUCKS (Also See Trucks, Industrial Service)
3500 lb. Clark #ESM-II-17, forklift, battery charger, needs new battery, #A3452 Visit Dealer's Equipment Listing  
12500 lb. Caterpillar #T12D, propane, triple mast, side shift, fork shift, 2-speed auto transmission, hard tires, lights, #9948 Camera icon Visit Dealer's Equipment Listing  

FOUNDRY EQUIPMENT
BLAST CLEANING/PEENING, FOUNDRY
Coldjet Aero 30, 2A0150 ice blasting machine, 2 nozzles, emergency stop, 178 hours, 2007, #A2512 Camera icon  Visit Dealer's Equipment Listing  
Cyclone #E500, bench sand blast cabinet, hand gun, rubber gloves, #8265 Camera icon Visit Dealer's Equipment Listing  
Goff George Fischer shot blasting machine, 6 cu.ft., dust collector, 1994, #A2124 Visit Dealer's Equipment Listing  
Paul & Griffin #E2, sandblasting cabinet, 24" x24" x18" cap, gloves, worklight, Ser.#537, #A2941 Camera icon Visit Dealer's Equipment Listing  

FURNACES & OVENS
OVENS, CABINET TYPE
10" W x 10" H x 10" D Blue M #VO-010A, electric oven, 500°F, Ser.#V-191, #9076 Camera icon Visit Dealer's Equipment Listing  
20" x 12" x 16" Delta Design Temperature Chamber #MK6300, Solid State controller, Null Detector Circuit, #A2862 Camera icon Visit Dealer's Equipment Listing  
35" D x 35" H x 37" H Proheco #HCF0363636PE, electric oven, exhaust blower, Proheco temperature controller, #A2010 Camera icon Visit Dealer's Equipment Listing  

GRINDERS, BELT (Also See Sanders, Belt)
24" AEM #CS240MDDM, Cleanomat dryer, variable feed conveyor, 5 HP, serial #M05008, 1980, #5302 Camera icon  Visit Dealer's Equipment Listing  
36" AEM #501-37MD, Cat-5 wet dust collector, electric eye tracking, air tracking on belt, spring loaded hold downs, #A1468 Camera icon  Visit Dealer's Equipment Listing  
36" Amada #CS-360MDDM, AEM rotary disc grinder, coolant system, air knife dryer, manual height adjustment, #A1333 Camera icon  Visit Dealer's Equipment Listing  
36" Grindingmaster #2075M, Cat-5 wet dust collector, elec.eye tracking, spring loaded holddowns, air tracking on conveyor, #A1469 Camera icon  Visit Dealer's Equipment Listing  
36" Timesaver Grindmaster #2000, belt grinder w/wet dust collector, single head, load meter, emergency stop, 1995, #A2120 Camera icon  Visit Dealer's Equipment Listing  
37" Cemco #2000, dual head belt grinder, belt/brush, wet, oscillating brush head, pwr work hght adj, paper filter clnt sys, #A1366 Camera icon  Visit Dealer's Equipment Listing  
37" Timesaver #137-1HDMW, paper filter coolant, air knife dryer, 1988, #8545 Camera icon  Visit Dealer's Equipment Listing  
37" Timesaver #137-1HDMW, wet belt grinder, paper filter coolant sys, Stainless Steel construction, touch screen control, #A2755 Camera icon Visit Dealer's Equipment Listing  
37" Timesaver #137-HDMW, paper filter coolant, air knife, air disc brakes, 20 HP, 1990, #7977  Visit Dealer's Equipment Listing  
52" Timesaver #252MW, belt grinder, wet type, elec.eye belt tracking, air knife dryer, air disc brakes, pwr work height adj, #A1243 Camera icon  Visit Dealer's Equipment Listing  
52" Ty-Sa-Man #252CT, air tracking, Reeves V/S, air filters, 30 HP, serial #69079, #2852 Camera icon  Visit Dealer's Equipment Listing  

GRINDERS, CENTERLESS
No. 2LO Cincinnati, 3-1/2" , man.wheel dressers, 6" reg. & grinding wheels, thrufeed, 15 HP, #6822 Camera icon  Visit Dealer's Equipment Listing  

GRINDERS, CYLINDRICAL, PLAIN (Also See Grinders, Roll)
4" x 18" Studer #RHU-450, universal cylindrical grinder, motorized workhead, coolant system, #9741 Camera icon  Visit Dealer's Equipment Listing  
5" x 12" Myford #MG12, cylindrical grinder, motorized workhead with center, tailstock with center, #9767 Camera icon Visit Dealer's Equipment Listing  
10" x 20" Brown & Sharpe #1A, universal grinder, motorized workhead, tailstock, swing down internal grinding attachment, #A1563 Camera icon Visit Dealer's Equipment Listing  
10" x 24" Norton OD/ID universal automatic cylindrical grinder, internal grinding attachment, motorized workhead, #A2174 Camera icon Visit Dealer's Equipment Listing  
12" x 30" Sigma Tos #2UDP2750, sw.dwn internal attach., pwr.quill, plunge, 6-jaw, 10HP Camera icon  Visit Dealer's Equipment Listing  
19" x 78" SMTW Shanghai #M1450Ax2000, ID/OD grinder, internal grinding att., #A2176 Camera icon Visit Dealer's Equipment Listing  

GRINDERS, CYLINDRICAL, UNIVERSAL
10" x 12" Karsten Stuttgart #ASA, work head, auto infd, tailstock, hyd.sys., #A3523 Visit Dealer's Equipment Listing  
10" x 39" Shigiya Seiki #GUA-27-100, auto., wheel & work head, tlstk, clnt sys., hyd.sys., #A3522 Visit Dealer's Equipment Listing  
11" x 30" Ramco #LF-800H, cylindrical grinder, swing down internal grinding attachment, motorized workhead, tailstock, #9740 Camera icon  Visit Dealer's Equipment Listing  
14" x 72" Cincinnati #OE14LX72, univ.hyd.cylindrical grinder w/internal grinding attach., motor d workhead, coolant, tlstk, #A2781 Camera icon  Visit Dealer's Equipment Listing  

GRINDERS, DRILL
Cincinnati Spiropoint #1000, drill grinder, 1/32" x 1" , #6158 Camera icon  Visit Dealer's Equipment Listing  

GRINDERS, JIG
No. 1 Moore, jig grinder, 10" x 16" tbl., fine hand feed, Ser.#225, #A3386 Visit Dealer's Equipment Listing  

GRINDERS, SURFACE RECIPROCATING TABLE (Horizontal Spindle)
6" x 12" Boyar-Schultz #612 Deluxe, automatic surface grinder, single axis, #8698 Camera icon  Visit Dealer's Equipment Listing  
6" x 12" Boyar-Schultz #H612, surface grinder, Walker permanent magnetic chuck, #8112 Camera icon  Visit Dealer's Equipment Listing  
6" x 12" Boyar-Schultz #H612, surface grinder, 6" x 12" Permanent Magnetic Chuck, #A2179 Camera icon Visit Dealer's Equipment Listing  
6" x 12" Boyar Schultz #H612, hydraulic surface grinder, Walker EMC w/vari-ctrl, #A3305  Visit Dealer's Equipment Listing  
6" x 12" Boyar-Schultz #H612, surface grinder, customized 4 way grinding plate, #A2952 Camera icon Visit Dealer's Equipment Listing  
6" x 12" Brown & Sharpe #612 Micromaster, surface grinder, permanent magnetic chuck, #7249 Camera icon  Visit Dealer's Equipment Listing  
6" x 12" Brown & Sharpe #612 Micromaster, automatic surface grinder, #7248 Camera icon Visit Dealer's Equipment Listing  
6" x 12" Harig Super #612, Permanent Magnetic chuck, 1 HP, #A1748 Camera icon Visit Dealer's Equipment Listing  
6" x 18" Abrasive #1-1/2, surface grinder, PMC, #8940 Camera icon Visit Dealer's Equipment Listing  
6" x 18" Birmingham #WSG-618, surface grinder, Halogen work light, tool box, lubrication system, coolant system, PMC, #A2820 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Boyar-Schultz #2A618 Challenger, automatic surface grinder, perm.mag.chuck, pwr.feed, parellel dresser, #7250 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Brown & Sharpe #618 Micromaster, auto., 2-Axis hyd.feeds (X-Y), permanant magnetic chuck, #9736 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Brown & Sharpe #618 Micromaster, auto.surface grinder, 2-axis hyd.feeds (x-y), vert.grinding spindle, auto lube, #9735 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Brown & Sharpe #618 Micromaster, auto.surface grinder, 2-axis hyd.feeds (x-y), 6" x 18" PMC, coolant system, #9737 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Brown & Sharpe #618 Micromaster, 2-Axis automatic surface grinder, 8" grind wheel, 6" x18" manual magnetic chuck, #A2816 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Chevalier #FSG-618, surface grinder, EMC, coolant, dust suction, #8527 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Chevalier #FSG-618SP, Accugrind super precision surface & form grinder, auto lubrication system, PMC, #A2951 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Covel #15, surface grinder, Permanent Magnetic chuck, #A1302 Camera icon Visit Dealer's Equipment Listing  
6" x 18" Eisen #618B, precision manual surface grinder, permanent magnetic chuck, work light, coolant system, 3600 RPM, #A3049 Camera icon  Visit Dealer's Equipment Listing  
6" x 18" Parker Majestic #2, surface grinder, Optidress Mircoscope wheel dresser, 1976, #8661 Camera icon Visit Dealer's Equipment Listing  
6" x 18" Rutland #C-618, Yuasa Permanent magnetic chuck, Chen Ying Lubrication system, worklight, #A3348 Camera icon Visit Dealer's Equipment Listing  
8" x 16" Kent #KGS-250H, Precision 2-Axis automatic surface grinder, Permanent Magnetic chuck, coolant system, #A3022 Camera icon Visit Dealer's Equipment Listing  
8" x 18" Chevalier #FSG-2A20, surface grinder, 2-Axis automatic, permanent magnetic chuck, #7047 Camera icon  Visit Dealer's Equipment Listing  
10" x 20" Chevalier #FSG-3A1020, hyd. tank, coolant sys, auto lube, replacement grinding whl, ' 06, #A3384 Visit Dealer's Equipment Listing  
16" x 40" Kent #SGS-1640AHD, 3-Axis, fully automatic surface grinder, coolant system, work light, #A2340 Camera icon  Visit Dealer's Equipment Listing  

GRINDERS, SURFACE RECIPROCATING TABLE (Vertical Spindle)
16" x 80" Snow #20/326, incremental downfeed, Norton seg.wheel, power elevation, pendant, Vickers lube, #4663 Camera icon  Visit Dealer's Equipment Listing  

GRINDERS, TOOL & CUTTER (Also See Grinders Tool & Cutter, CNC)
No. OE Cincinnati Monoset tool & cutter grinder w/motorized workhead, 12" x6" , work light, #A3471 Camera icon Visit Dealer's Equipment Listing  
No. SO Deckel, single lip cutter grinder, (3) collets, stand, 1/3 HP, #8857 Camera icon Visit Dealer's Equipment Listing  
No. SO/67 Deckel single lip tool & cutter grinder end mill, 1/32" to 11/16" , #A2841 Visit Dealer's Equipment Listing  
No. TEG-160E Amada, die grinder, stand, (3) collets, 1/3 HP, #A2295 Camera icon Visit Dealer's Equipment Listing  
No. RM405 Ramco, tool & cutter grinder, 10" x 27" , pair of tailstocks, one shot lube, #9738 Camera icon  Visit Dealer's Equipment Listing  
No. 375-4 Gorton tool & cutter grinder, grinds 2, 3, 4 & 6 flutes, cutter to 1" , #A2998 Visit Dealer's Equipment Listing  
No. C3912 Wit-O-Matic universal insert grinder w/radius generator attachment, #A1749 Camera icon Visit Dealer's Equipment Listing  
Harig Steptool, tool & cutter grinder, 8" x 22" , motor driven work head, #8378 Camera icon  Visit Dealer's Equipment Listing  
Ramco Monoset Unoset, motorized work head, one shot lubrication system, #9768 Camera icon  Visit Dealer's Equipment Listing  

HAMMERS, MECHANICAL, POWER
Chambersburg heavy duty power hammer, #A2773 Camera icon  Visit Dealer's Equipment Listing  

HEADERS, COLD
1/8" x 1-1/4" Waterbury-Farrel #2519, Head Master cold header, #2519 Camera icon Visit Dealer's Equipment Listing  

HONES, HORIZONTAL (Also See Superfinishers)
Sunnen #MBB1600, horizontal hone, 0.060" -6.500" , tooling, #A1965 Camera icon  Visit Dealer's Equipment Listing  
Sunnen #MBB-1650, horizontal hone, 0.060" -6.500" , Sunnen PF150 filter & pump, tooling, #A2106 Camera icon Visit Dealer's Equipment Listing  
Sunnen #MBB-1800, .060" -6.5" , power stroking attach., lots of tooling, new in box, #A3095 Camera icon Visit Dealer's Equipment Listing  
Sunnen #MBC1803, .030" -3.75" , power stroking, automatic cycle start, automatic shut-off, self energizing spindle brake, #A2401 Camera icon  Visit Dealer's Equipment Listing  

HONES VERTICAL (Also See Superfinishers)
Micromatic #720, 3/4" - 9" , internal vertical honing machine, honing heads, #6125 Camera icon  Visit Dealer's Equipment Listing  
Sunnen #CV616, Cylinder King automatic vertical honing machine, 3/4" - 8" , cabinets full of tooling, #A2766 Camera icon Visit Dealer's Equipment Listing  

IRONWORKERS
4" x 4" x 1/2" Buffalo #1-1/2, dual operation, 65 ton, universal metalworking ironworker, tooling, 24" throat, #A2346 Camera icon Visit Dealer's Equipment Listing  
4" x 4" x 1/2" Hill-Acme #4A, 58 ton, punches, dies, 12" shear, 2-3/4" x2-3/4" x3/8" coper, #9754 Camera icon  Visit Dealer's Equipment Listing  
4" x 4" x 1/2" Iron Crafter #70-70, hydraulic ironworker, 9" plate shear, 70 ton, angle shear, round bar shear, #A1737 Camera icon Visit Dealer's Equipment Listing  
6" x 6" x 5/8" Kingsland #J25 type XA, mech.heavy duty multi station ironworker, 100 ton, foot pedal, hand lever controls, #A2467 Camera icon  Visit Dealer's Equipment Listing  
Kingsland #75-SX, hyd.ironworker, 75 ton, foot pedal, electric foot switch operation for shear end., dual palm, #A3141 Camera icon Visit Dealer's Equipment Listing  
Spartan /Marvel #IW130D, hydraulic dual operation multi-station ironworker, punches & dies, bar shear, punch station, #A2696 Camera icon Visit Dealer's Equipment Listing  

LATHES, ENGINE (Also See Lathes, Engine, Gap or Tracer & Copying)
10" x 33" South Bend #CLC187RB, heavy duty lathe, flame harden bed, metal cabinet, #A2993 Camera icon Visit Dealer's Equipment Listing  
10" x 33" South Bend #CLC8187RB, heavy duty lathe, flame harden bed, metal cabinet, no tlstk/chk, #A2990 Camera icon Visit Dealer's Equipment Listing  
10" x 33" South Bend #CLC8187RB, heavy duty lathe, flame harden bed, metal cabinet, no chuck, #A2991 Camera icon Visit Dealer's Equipment Listing  
10" x 33" South Bend #CLC8187RB, heavy duty lathe, flame harden bed, metal cabinet, #A2994 Camera icon Visit Dealer's Equipment Listing  
12" x 24" Hes #ACC-300, engine lathe, tool post, hyd.tracer att., hyd.collet closer, Hardinge speed collet chuck, coolant sys, #A2000 Camera icon  Visit Dealer's Equipment Listing  
13" x 40" America #1340VS, engine lathe, 3-Jaw chuck, coolant system, splash guard, 5 HP, #A1628 Camera icon Visit Dealer's Equipment Listing  
13" x 40" Harrison #M300, engine lathe, Jenix 2-Axis DRO, coolant system, #A2988 Visit Dealer's Equipment Listing  
13" x 40" Harrison #M300, engine lathe, Sargon 2-Axis DRO system, coolant system, foot brake, #A2996 Camera icon Visit Dealer's Equipment Listing  
14" x 36" Reed-Prentice, 12" Bison steel, 3-Jaw chuck, chip tray, steady rest, taper attach., QuickChange Toolpost w/holder, #A3125 Camera icon Visit Dealer's Equipment Listing  
14" x 40" Jet #GH-1440-ZX, 10" 3-Jaw chuck, Quick Change toolpost w/holders, worklight, drill chuck, follow rest, coolant sys, #A3417 Visit Dealer's Equipment Listing  
14" x 40" Jet #GH-1440-ZX, gap bed lathe, Acu-Rite 2-Axis DRO, 3-jaw 10" chuck, #A3519 Visit Dealer's Equipment Listing  
15" x 42" LeBlond #15 Regal, 3-Jaw chuck, toolpost, #A3349 Visit Dealer's Equipment Listing  
15" x 42" Webb Whacheon #RL-400, engine lathe, 10" 3-Jaw chuck, trav-dial on carriage, toolpost, coolant sys, foot brake, #A3429 Visit Dealer's Equipment Listing  
15" x 50" Clausing Colchester #1550, 3-jaw, coolant, #8863 Camera icon  Visit Dealer's Equipment Listing  
16" x 30" Springfield #16-S, heavy duty engine lathe, 4-jaw chuck, steady rest, bed stop, #A2778 Camera icon  Visit Dealer's Equipment Listing  
16" x 45" National #1645, engine lathe, Mitutoyo 2 Axis DRO system, 3-Jaw chuck, tool post, chuck guard, #A1659 Camera icon Visit Dealer's Equipment Listing  
17" x 120" LeBlond Regal, 2 steady rests, follow rest, 3 & 4-jaw, Trav-A-Dial, #A2016 Camera icon  Visit Dealer's Equipment Listing  
17" x 32" Mori-Seiki #MS-850, engine lathe, 3-jaw chuck, 4 way tool post, steady rest, foot brake, #A3072 Visit Dealer's Equipment Listing  
17" x 32" Mori-Seiki #MS-850, engine lathe, 3-jaw chuck, 4 way tool post, steady rest, foot brake, #A3071 Visit Dealer's Equipment Listing  
17" /22" x 40" Graziano #SAG210N, gap bed engine lathe, 3&4-jaw chuck, Duplomatic TA-80 tracer attachment, tool post, #A2153 Camera icon   Visit Dealer's Equipment Listing  
17" /22" x 40" Graziano #SAG210NR, gap bed engine lathe, 3-jaw chuck, tool post set, tracer attachment, face plate, coolant, #A2212 Camera icon  Visit Dealer's Equipment Listing  
17" x 54" Monarch #62-1610, Buck 6-jaw chuck, less 3 jaws, 4-jaw chuck, taper attachment, #9706 Camera icon  Visit Dealer's Equipment Listing  
18" /24" x 54" Dainichi #1854, engine lathe, 6-jaw chuck, steady rest, #8391  Visit Dealer's Equipment Listing  
18" /27" x 60" South Bend Turn-Nado #1860EVS, gap bed, 13" 3-jaw chuck, 2000, #A3199 Camera icon  Visit Dealer's Equipment Listing  
18" x 78" Monarch #16CY, heavy duty engine lathe, 3-jaw chuck, flame hardened bed, chip tray, Aloris tool post, coolant sys, #A3073 Visit Dealer's Equipment Listing  
19" x 54" LeBlond Regal, engine lathe, 10" 3-jaw, 12" 4-jaw, rear splash guard, steady rest, quick change tool holder, #A2537 Camera icon  Visit Dealer's Equipment Listing  
20" /26" x 120" Lion #C11-MT, gap bed engine lathe, 4 way tool post, 2 steady rests 5" & 10" , follow rest, chip tray, #A2901 Camera icon  Visit Dealer's Equipment Listing  
20-1/2" x 54" Lodge & Shipley Powerturn #2013, lathe, coolant system, work light, 4 way rapid traverse, #A3034 Visit Dealer's Equipment Listing  
21" x 54" Lodge & Shipley #2013AVS, engine lathe, 3 & 4-Jaw chuck, tool post, live center, General Electric Speed Variator, #A1670 Camera icon Visit Dealer's Equipment Listing  
21" x 54" Lodge & Shipley #AVS-2013, variator drive, 3 Jaw, taper attach., coolant, #9223 Camera icon  Visit Dealer's Equipment Listing  
21" x 60" Mighty-Turn #ML2160GL, 4-jaw, steady rest, taper, 4 way rapid, 15 HP, 1990, #6100 Camera icon  Visit Dealer's Equipment Listing  
21" x 60" Okuma #LS, engine lathe, Newall DRO, 3 & 4-Jaw chuck, face plate, Quick Change tool post, arbor, #A2965 Camera icon Visit Dealer's Equipment Listing  
21" /30" x 60" Tarnow #TUJ-50x1500, gap bed engine lathe, steady rest, chip tray, 3-jaw chuck, face plate, 4-way tool post, #A2779 Visit Dealer's Equipment Listing  
21" /29" x 80" Webb #20-1/2x80, gap bed engine lathe, 3&4-jaw chuck, steady & follow rest, 4 way tool post, coolant sys, ' 79, #A2172 Camera icon   Visit Dealer's Equipment Listing  
22" x 80" Graziano Sag #22, 3-jaw, quick change tool post set, Trav-a-Dial, clnt, #A2066 Camera icon  Visit Dealer's Equipment Listing  
23" x 118" Tuda #TudorMax 23x118, geared head lathe, 3-jaw 18" chuck, 22" face plate, steady rest, #A3507 Visit Dealer's Equipment Listing  
24" x 72" Hes #660, engine lathe, 3&4-jaw chuck, steady rest, tracer attachment, tool post set, foot brake, coolant, chip tray, #A2717 Camera icon Visit Dealer's Equipment Listing  
25" /30" x 120" Summit #25-3, gap bed heavy duty, 22" 4-jaw, S/R, guaranteed, #A2634 Camera icon   Visit Dealer's Equipment Listing  
26" x 96" LeBlond #20SL, lathe, KDK tool post, chip tray, live center, clnt sys, 12" 3-jaw chuck, hyd.tracer attach, steady rest, #A3048 Camera icon Visit Dealer's Equipment Listing  
28" x 150" Lodge & Shipley Series 20, heavy duty engine lathe, taper attach., clnt, tool post, 18" 4-jaw chuck, 2 steady rests, #A2235 Camera icon   Visit Dealer's Equipment Listing  
30" /40" x 196" Saro #SPA7, gap bed heavy duty engine lathe, taper attachment, coolant system, KDK Quick Change tool post, #A2905 Camera icon  Visit Dealer's Equipment Listing  
42" x 300" Niles heavy duty engine lathe, 15" roller type steady rest, change gears, 30" 4-jaw chuck, 3-jaw chuck, face plate, #A2229 Camera icon  Visit Dealer's Equipment Listing  
49" x 40' Niles Heavy Duty engine lathe, 48" 4-jaw chuck, 2 roller type steady rests, tool post, 40 HP, #C9786 Camera icon Visit Dealer's Equipment Listing  
50" /68" x 20' Okuma #LDA, heavy duty lathe, 4-jaw chuck, 4 way rapid traverse, SR, #A1247 Camera icon  Visit Dealer's Equipment Listing  
52" x 300" Bertram & Sons heavy duty engine lathe, 12" riser, 20" 4-Jaw chuck, taper attachment, tool post, change gears, #A2231 Camera icon  Visit Dealer's Equipment Listing  

LATHES, ENGINE, GAP, Removable or Sliding Bed
14" x 40" Birmingham #CT-1440G, Mitutoyo digital readout, 3-Jaw 6" chuck, QC toolpost, holder, collet closer, steady rest, #A3487 Camera icon Visit Dealer's Equipment Listing  
16" /25" x 40" Jet #GH-1640ZX, follow rest, steady rest, Newall DRO, coolant sys, work light, toolpost, 4-Jaw chuck, face plate, #A3363 Camera icon Visit Dealer's Equipment Listing  
24" /39" x 52" /84" LeBlond Regal, sliding gap bed lathe, 24" gap sliding head, 15" 4-Jaw chuck, live center, #A3315 Visit Dealer's Equipment Listing  
24" /32" x 80" Ikegai #DA-25, gap bed, Bison 4-jaw 19" chuck, QC tool post, #A2777 Camera icon  Visit Dealer's Equipment Listing  
43" /51" x 60" Vanguard #CW62110C, heavy duty, 2-Axis digital readout, tracer attach, rapid trav., coolant sys, 2008, #A3362 Visit Dealer's Equipment Listing  
Ta Shing Crown #2/1000, ' Removable' Gap Bed Engine Lathe, 3-Jaw Chk, #A3070 Camera icon Visit Dealer's Equipment Listing  

LATHES, ENGINE, OIL FIELD & HOLLOW SPINDLE
26-1/2" /40" x 144" Lodge & Shipley Powerturn #2516, hollow spdl oil field lathe, #A3464 Visit Dealer's Equipment Listing  

LATHES, PRECISION & SECOND OPERATION (Also See Automatic Screw Machines & Chuckers)
Elgin #EPL5C, lathe, 9" x 15" , bed turret, bar feed, #7023 Camera icon Visit Dealer's Equipment Listing  
Feeler #FTL-618E, Hardinge Copy precision engine lathe, 11" x 18" , 5C Collet Closer, 5C Collets, #A2579 Camera icon Visit Dealer's Equipment Listing  
Hardinge #HC, chucker, 9" x 13" , collet closer, #6399 Camera icon  Visit Dealer's Equipment Listing  
Hardinge #HC, chucker machine, 9" x 13" , turret, 5C Collet Closer, #A1869 Camera icon Visit Dealer's Equipment Listing  
Hardinge #HC, Super Precision Chucker, 9" x13" , Coolant Sys, 5C Collet, worklight, auto thrdg.attach, #A3304 Camera icon Visit Dealer's Equipment Listing  
Hardinge #HC, Super Precision Chucker, 9" x13" , brake motor, coolant sys, 5C Collet, 6" 3-Jaw chuck, 8 pos.tur., #A3306 Camera icon Visit Dealer's Equipment Listing  
Hardinge #HLV-H, precision tool room lathe, 11" x 18" , Anilam 2-Axis DRO, 5" 3-jaw chuck, lever 5C collet closer, coolant sys, #A2873 Camera icon  Visit Dealer's Equipment Listing  
Hardinge #HSL, speed lathe, 9" x 10" , X-Y compound slide, lever 5C closer, vari-speed control, #9247 Camera icon  Visit Dealer's Equipment Listing  
Hardinge #TFB, precision tool room lathe, 11" x 18" , collet holder, splash guard, KDK tool post, collets, work light, #A3026 Camera icon Visit Dealer's Equipment Listing  

LATHES, SPINNING
12" Lodge & Shipley #12 Floturn, serial #45359, #4954 Camera icon  Visit Dealer's Equipment Listing  

LIFTS
5500 lb. Blue Giant #FPT-55, pallet jack, parts only, #A3492 Visit Dealer's Equipment Listing  

MILLERS, HORIZONTAL & VERTICAL (COMBINATION)
Varnamo #U-2 , horiz.& vert.mill, 12" x60" , Newall 3-axis DRO, univ.all angle vert.head, arbor suppts, lube, coolant, rapids, #9608 Camera icon  Visit Dealer's Equipment Listing  

MILLERS, PLAIN, HORIZONTAL, Bed & Knee Type (Also See CNC Machinery,Millers)
Cincinnati #4, horizontal/universal mill, 16" x79" , one shot lube, coolant sys, rapid trav, #A3505 Visit Dealer's Equipment Listing  
Cincinnati Cinel #60 205-12, horizonta/univeral mill, one shot lube, coolant system, rapid traverse, #A3472 Camera icon  Visit Dealer's Equipment Listing  
Kearney & Trecker #5HP-2CH, horizontal mill w/vertical milling head attachment, 12" x50" , rotary index w/3-jaw chuck, DRO, #A2619 Camera icon  Visit Dealer's Equipment Listing  
Kearney & Trecker #430TF Series, plain type universal horizontal milling machine w/universal head, 19-1/2" x 88" , #A1964 Camera icon  Visit Dealer's Equipment Listing  
Polamco #FXS40, ballscrews, hardened & ground ways, arbor & support, hyd.clamp., 1980, #4157 Camera icon  Visit Dealer's Equipment Listing  
Toolmaster horizontal milling machine, 10" x 43" , vertical milling machine head attachment, rapid traverse, coolant sys, #A2722 Camera icon Visit Dealer's Equipment Listing  

MILLERS, VERTICAL, Bed & Knee Type, (Also See CNC Machinery & Equip., Millers)
Arch #ACM-153V, vertical milling machine, 9" x 49" power feed table, 1 Shot Lube system, Mitutoyo 2-Axis DRO, 1996, #A2375 Camera icon Visit Dealer's Equipment Listing  
Astro #GS15F-1, vertical milling machine, 9" x 49" table, inverter frequency drive motor, A/C inverter frequency drive, #A2422 Camera icon Visit Dealer's Equipment Listing  
Bridgeport Series I, vertical mill, 9" x 42" table, step pulley type, #A3114 Visit Dealer's Equipment Listing  
Bridgeport Series I, step pulley type, vertical mill, 9" x49" , drill chuck, collets, #A3249 Visit Dealer's Equipment Listing  
Bridgeport Series I, vertical mill, vari-speed, 9" x42" , one shot lube, clamping kit, #A3481 Visit Dealer's Equipment Listing  
Bridgeport Series II Special, vertical mill, 11" x 58" , Sokki 2-Axis DRO system, Bridgeport table power feed, #A2964 Camera icon  Visit Dealer's Equipment Listing  
Chevalier #1054, heavy duty vertical miller, 10" x 54" , Mitutoyo 2-Axis DRO, servo table power feed, one shot lubrication, #A2805 Camera icon  Visit Dealer's Equipment Listing  
Enco #100-1529, 9" x42" , Enco 2-Axis Digital readout, one shot lube system, table power feed, drill chuck, #A3380 Visit Dealer's Equipment Listing  
Ex-Cell-O #602, variable speed vertical milling machine, 9" x 42" table, chrome & scraped ways, Bijur 1 shot, #A2751 Camera icon Visit Dealer's Equipment Listing  
Ex-Cell-O #602, vari-speed vertical milling machine, 9" x 42" , one shot lube system, table power feed, vari-speed head, #A2752 Camera icon  Visit Dealer's Equipment Listing  
Ex-Cell-O #602, vari-speed vertical milling machine, 9" x 42" , chrome & scraped ways, table power feed, vari-speed head, #A2750 Camera icon Visit Dealer's Equipment Listing  
Husky #AM-VO-AIS, vertical milling machine, 8" x 30" tbl., 1 phase motor, R8 spindle, same as standard Bridgeport, #A2956 Camera icon Visit Dealer's Equipment Listing  
Jinpu #CDM3-S, 10" x50" , on/off/emergency stop switch box, one-shot lube sys., work light, 3" x0.63" x2.48" T-slots, #A3354 Visit Dealer's Equipment Listing  
Kearney & Trecker #315S-15, heavy duty vertical mill, 15" x68" , coolant system, box ways, one shot lube, #A2745 Camera icon Visit Dealer's Equipment Listing  
Kondia #FV-1, 9" x42" , one shot lube, scraped & chrome ways, variable speed head, #A3407 Camera icon Visit Dealer's Equipment Listing  
Lagun #FTV-1, vertical mill, 9" x 42" power feed table, power draw bar, spray mist coolant system, gore type, #A1684 Camera icon Visit Dealer's Equipment Listing  
Machinist #1-1/2VA, veritcal mill, 10" x 48" , table power feed, one shot lube, 2 HP, #8228 Camera icon  Visit Dealer's Equipment Listing  
MSC Series I, vertical mill, 9" x49" , Mini Wizard DRO, one shot lube, powered table feed, #A3480 Camera icon Visit Dealer's Equipment Listing  
Rambaudi #V2, 12" x42" , geared table powerfeed, rapid traverse, coolant system, work light, #A3518 Visit Dealer's Equipment Listing  
Sharp #TMV1, vertical mill, 10" x50" , Sony 2-Axis DRO, cross, knee, long.power feed, one shot lube system, box ways, #A2813 Camera icon  Visit Dealer's Equipment Listing  
Supermax #YCM-1-1/2-VS, Vertical mill, 9" x 42" , Sony 2 Axis Digital Readout, #A2032 Camera icon Visit Dealer's Equipment Listing  
Tree #2UVR, vertical mill, 10.5" x 42" geared table power feed, One Shot Lube system, 1-1/2 HP, #A2047 Camera icon Visit Dealer's Equipment Listing  
Tree #2UVR, vertical mill, 10.5" x 42" , geared table power feed, 1 Shot Lube system, #A2749 Visit Dealer's Equipment Listing  
Tree #2UVR, vertical mill, 10.5" x42" , gear Y power feed, one shot lube, mist coolant, #A3500 Visit Dealer's Equipment Listing  
Vectrax #GS16V, vertical mill, 9" x49" , Acu-Rite 2-Axis DRO, table power feed, mist coolant, #A3520 Visit Dealer's Equipment Listing  
Webb Champ #4VK-HC, high-column, 10" x50" , Chenco pneumatic power drawbar, Sony 2-Axis digital readout, powered table feed, #A3504 Camera icon  Visit Dealer's Equipment Listing  
Wells Index #845, vertical mill, 9" x46" , Y cross table power feed, one shot lube, head tilts, #A3502 Visit Dealer's Equipment Listing  
Wells Index #847, vertical mill, 9" x 46" , Servo table feed, spray mist coolant, #8384 Camera icon  Visit Dealer's Equipment Listing  
Willis #KM1-V, vertical milling machine, 10" x 50" table, new Acra 2-Axis DRO, power feed table, One Shot Lube System, #A2337 Camera icon Visit Dealer's Equipment Listing  

NIBBLERS
No. 4A Heck Trace-A-Punch nibbling machine, 3/16" , heavy duty table with casters, #A2283 Camera icon Visit Dealer's Equipment Listing  

NOTCHING MACHINES (Notchers)
11 ga. x 1-1/2" Kidder #59H40, 11 ga. hydraulic pipe notcher, 1-1/2" pipe die, #8100 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 4" Excelsior #11, double cut hand notcher, #A1026 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 4" Excelsior #11, dbl cut hand notcher, 4" x 4" notch, hand operated, can use intependent, #A1027 Camera icon Visit Dealer's Equipment Listing  
1/8" x 8-5/8" x 8-5/8" Amada #CS-220, corner shear notcher, twin work guides, timer, foot pedal, one shot lube system, #A3509 Visit Dealer's Equipment Listing  
1/8" x 8-5/8" Amada #CS-220, power corner shear notcher, twin work guides, timer, foot pedal, #A3104 Camera icon Visit Dealer's Equipment Listing  
1/8" x 10" x 10" Comaca Unipunch #EHN260/5, hyd.notcher, twin work guides, scrap chute, foot pedal, emergency stop, 1997, #A2456 Camera icon  Visit Dealer's Equipment Listing  
1/8" x 10" Comaca Unipunch #EHN260, hydraulic, twin work guides, one shot lubrication system, 1991, #9727 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 7-1/2" Euromac #200/4, hydraulic notcher, twin work guides, scrap chute, #A1234 Camera icon  Visit Dealer's Equipment Listing  
1/4" x 10" Comaca #25016, dual hydraulic notcher, 2 notching stations, twin work guides, remote electric foot pedal, 1988, #A1293 Camera icon  Visit Dealer's Equipment Listing  

PACKAGING EQUIPMENT
STRAPPING MACHINES & CASE TAPERS
24" x 34" Sivaron #SS-80, Strapping Machine, foot pedal, #A3347 Camera icon Visit Dealer's Equipment Listing  
Samuel #KS-710, automatic poly strapping machine, 44" x48" , made in Japan, 2003, #A3338 Camera icon Visit Dealer's Equipment Listing  
Samuel #KS-710, automatic poly strapping machine, 44" x48" , made in Japan, 2003, #A3353 Camera icon Visit Dealer's Equipment Listing  

PACKAGING EQUIPMENT
WRAPPING MACHINES (Wrappers)
Wulftec #WRT-150, semi-auto shrink stretch wrap rotary arm machine, laser tech sensor, control box, wrapping material, #A3415 Visit Dealer's Equipment Listing  

PLASMA CUTTERS/PUNCHES, (Also See CNC Machinery & Equipment,Plasma Cutters)
PolyDyne Corona Plasma Treatment System #10031-03, foot pedal, emergency stop, EMC, aluminum cabinets, Microprocessor controls, #8707 Camera icon Visit Dealer's Equipment Listing  

PRESSES, AIR
5 Ton, Greenerd #3B, air arbor press, adjustable stroke, #4722 Camera icon Visit Dealer's Equipment Listing  
5 Ton, Greenerd #B, air arbor press, adjustable stroke, #4723 Camera icon Visit Dealer's Equipment Listing  
8 Ton, Danly #SJ8, Magna air press, #6791 Camera icon Visit Dealer's Equipment Listing  
18 Ton, Tishken #CO-6-HWA, 2-post cut-off press, #5649 Visit Dealer's Equipment Listing  
20 Ton, Airam #20, air cut-off press, air tank, Lite Touch infrared dual hand controls, stand, #8493 Camera icon Visit Dealer's Equipment Listing  
100 Ton, Kard, hand pump, hydraulic cyl.& oil reservoir, pneumatic, regulator, serial #521, #3802 Camera icon  Visit Dealer's Equipment Listing  
American #L25, 1" x 3" , pneumatic bench press with air amplifer, #3937 Camera icon Visit Dealer's Equipment Listing  
Kras / West Air / hydraulic C-frame press, 12" x 20" bed, 3" stroke, 250 psi, 7" throat depth, 11-1/2" open height, #A1884 Camera icon Visit Dealer's Equipment Listing  

PRESSES, ARBOR
1.5 Ton, Dake #0, bench top arbor press, made in the USA, #A3216 Visit Dealer's Equipment Listing  
60 Ton, Greenerd #H60A, 20" , hydraulic arbor press, hand lever, foot pedal, 3 HP, #A2118 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Greenerd #H-60AD21, hydraulic arbor press, foot pedal, pressure gauge, #A1384 Camera icon Visit Dealer's Equipment Listing  

PRESSES, CUT-OFF
50 Ton, Airam #3562, cut-off press, dual palm control, air tank, 1980, #9175 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, DIE CUTTING (CLICKER)
20 Ton, Schwabe Twin-AB, twin head hyd.clicker press, dual palm control on both rams, separate controls for sgl or dual oper., #A2641 Camera icon  Visit Dealer's Equipment Listing  
20 Ton, Schwabe Twin-AB, twin head hyd.clicker press, dual palm control on both rams, separate controls for sgl or dual oper., #A2640 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Samco #TC-75, full beam die cutting clicker press machine, #A2423 Camera icon Visit Dealer's Equipment Listing  

PRESSES, GAP FRAME, DOUBLE CRANK
60 Ton, Rousselle #6B-60, gap frame OBI press, 3" , A/C & brake, remote dual palm control stand, manual ram adj., One shot lube, #A2492 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, GAP FRAME, SINGLE CRANK
5 Ton, Rousselle #OF, gap frame punch press, 2" stroke, air trip mechanical clutch, dual palm control, #8668 Camera icon Visit Dealer's Equipment Listing  
25 Ton, Rousselle #3F, gap frame press, 1-1/2" stroke, dual palm buttons, air clutch & brake, Ross air valve, #A2264 Camera icon Visit Dealer's Equipment Listing  
25 Ton, Rousselle #3F, air clutch/brake, sick light curtains, dual palm control, electric foot pedal, #9657 Camera icon  Visit Dealer's Equipment Listing  
25 Ton, Rousselle #3G, gap frame OBI punch press, 3" stroke, 18" throat, #7809 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Rousselle #6B-60, gap frame OBI press, air clutch & brake, curtains, dual air ctr.balance, #9470 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, Verson #150-96, 6" , 120" x 30" A-B Panelmate PLC, air cntr.bal, outboard support, #6982 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, HARDWARE INSERTING (Also See Insertion Machines)
8 Ton, Haeger #824, insertion press, tool protection system, 1999, #9522 Camera icon  Visit Dealer's Equipment Listing  
8 Ton, Pemserter #2000, automatic insertion press with touch screen control, foot pedal, emergency stop button, PLC, #A2876 Camera icon  Visit Dealer's Equipment Listing  
8 Ton, Pemserter #2000, automatic insertion press with touch screen control, foot pedal, emergency stop button, PLC, #A2875 Camera icon  Visit Dealer's Equipment Listing  
General Pneumatic riveter & insertion press #8000 CSA, 1/32" -1/4" , foot pedal, #A3440 Camera icon Visit Dealer's Equipment Listing  

PRESSES, HIGH SPEED & AUTOMATIC
15 Ton, Perkins #15-S, high speed punch press, 20" x10" bed, 0-500 SPM, A/C & brake, roll feed, batch counter, emergency stop, #A2499 Camera icon  Visit Dealer's Equipment Listing  
20 Ton, Benchmaster #20-4-2424-2-14PP-20/300-787F, Reeves V.S, hydraulic overload, #4210 Camera icon  Visit Dealer's Equipment Listing  
20 Ton, Minster #P2-20-24, hi-speed punch press, 1-1/4" str, A/C & brake, Vamco feeder, dual air counter balance, 24" x19" bed, #A1252 Camera icon  Visit Dealer's Equipment Listing  
22 Ton, Federal #22, high speed punch press, 1" stroke, 20" x12" bed, 35-600 SPM, A/C & brake, parts counter, emergency stop, #A2500  Visit Dealer's Equipment Listing  
22 Ton, Minster #3, hi-speed OBI punch press, 1-1/4" stroke, 20" x12" bed, 350 SPM, Minute meter, parts counter, A/C & brake, #A2498 Camera icon  Visit Dealer's Equipment Listing  
22 Ton, Minster #B1-22, high speed punch press, 20" x12" bed, 0-850 SPM, A/C & brake, Peterson roll feed, batch counter, #A2495 Camera icon  Visit Dealer's Equipment Listing  
22 Ton, Minster #B1-22, high speed punch press, 20" x12" bed, 0-850 SPM, A/C & brake, Vamco feeder V-667 Mark 3 w/auto lube, #A2497 Camera icon  Visit Dealer's Equipment Listing  
25 Ton, V & O #25ST, 2" stroke, air clutch & brake, 6" mech.feeder, outboard support, auto lube, 3 HP, serial #25ST-143, #7426 Camera icon  Visit Dealer's Equipment Listing  
45 Ton, L & J #45HS, 1" stroke, air clutch & brake, Solid State control, load analyzer, mech.roll feeder, dual palm control, #7765 Camera icon  Visit Dealer's Equipment Listing  
50 Ton, Benchmaster #5048, 2" stroke, air clutch/brake, counter balance, 2-post, 7-1/2 HP, #5739  Visit Dealer's Equipment Listing  
100 Ton, Alpha #F, 4-post, 5" stroke, air clutch, 44" x 37" bed, #6640 Camera icon Visit Dealer's Equipment Listing  

PRESSES, HORN, W/ADJUSTABLE OR SWING BED
18 Ton, Toledo #13, horn press, 3" stroke, air trip mechanical clutch, dual palm control, #9641 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, HYDRAULIC (Also See Presses, Laminating and Presses, Molding)
3 Ton, Hannifin #OG-F3B-3-2-1-M, hydraulic C-frame press, dual hand lever control, psi gauge, 40 gallon tank, #A2119 Camera icon  Visit Dealer's Equipment Listing  
7.5 Ton, Advanced #CPB7.5, hydraulic C-frame press, T-Slotted bolster plate, dual palm control, limit switch ctrl, #A2531 Camera icon Visit Dealer's Equipment Listing  
8 Ton, Hannifin #F-82-21-PB-2, hydraulic, parts counter, dual finger control, pressure gauge, #A2707 Camera icon Visit Dealer's Equipment Listing  
10 Ton, PH #OGF-10, hydraulic C-frame press, 13" stroke, Vickers valve, electric magnetic finger controls, #A2255 Camera icon Visit Dealer's Equipment Listing  
12 Ton, Dake #51-147, 12" x 0.002" , .125" feeder, lever control, adj.top stop control, #7429 Camera icon  Visit Dealer's Equipment Listing  
20 Ton, Greenerd #HCA-20-13R3, hydraulic press, dual palm, curtains, 18" , 30" x13" bed, 1996, #9189 Camera icon  Visit Dealer's Equipment Listing  
25 Ton, Dake #51-150, 15" x 0.002" , .125" feeder, manual lever control, adj.top stop, #7427 Camera icon  Visit Dealer's Equipment Listing  
30 Ton, Kard #TP-30-4, 16" stroke, hydraulic, 4-post, downacting, 30" x28" bed, dual hand lever control, #9111 Camera icon  Visit Dealer's Equipment Listing  
30 Ton, Logan #6000D-10, 18" stroke, tonnage indicator, ft.treadle, 15 HP, serial #412538, #6222 Camera icon  Visit Dealer's Equipment Listing  
30 Ton, Marley powered press, #3330  Visit Dealer's Equipment Listing  
30 Ton, P & H #OGF30, hydraulic, dual palm control, 29" x 19" bed, #9241 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Savage #60HTP, 4-post hyd.blanking trim press, light curtains, PLC, ' 92, #A2756 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Custom #75T, hydraulic up-acting press, 6.5" ram, Watlow temperature control, dual electric finger button, #A2057 Camera icon Visit Dealer's Equipment Listing  
75 Ton, Williams-White #75, 16" stroke, hand lever control, tonnage ga, 10 HP, serial #C2876, #6153 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, Lened hydraulic 4-post upacting molding press, 12" DL, 18" x 18" platen, 18" x 9" between posts, #7441 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, Tetrahedron #MTP24, 4-post air hyd.up-act.laminating press, 24" x24" heated platens 1000°, W/C type, air over oil, #A2558 Camera icon  Visit Dealer's Equipment Listing  
175 Ton, Columbus Industries Trimmer, 4-post hydraulic trim press, 4-way can trimming attachment, dual palm controls, #A1879 Camera icon  Visit Dealer's Equipment Listing  
200 Ton, Pacific #200PF Press Former, hydraulic C-frame universal press, 12" stroke, foot pedal, #A2309 Camera icon Visit Dealer's Equipment Listing  
500 Ton, Nantong Tongtian Custom 4-post hyd.drawing, forming, forging machine, T-slotted bed & ram, manual/auto.operation, #A2645 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, HYDRAULIC, C-FRAME (GAP FRAME)
1 Ton, Denison Multipress #BD1C64B11C58, hydraulic, 3" stroke, palm button, controls, self contained hydraulics, electric, #2974 Camera icon Visit Dealer's Equipment Listing  
1 Ton, Denison Multipress #WUA, 3" stroke, hydraulic, dual palms, #9118 Camera icon Visit Dealer's Equipment Listing  
3 Ton, Denison Multipress #W3A-3, hydraulic C-frame press, Camco rotary vari-speed table/indexer w/6 positions, #A2378 Visit Dealer's Equipment Listing  
4 Ton, Denison Mulitpress #WR045L-C304FS1-50.94171-CA-A, hydraulic C-frame, dual palm controls, stand, #A2146 Camera icon   Visit Dealer's Equipment Listing  
4 Ton, Denison Multipress, hydraulic C-frame press, 18" x 11" bed, dual electric finger button operation, psi gauge, #A2257 Camera icon  Visit Dealer's Equipment Listing  
6 Ton, Denison Multipress #DF6C01A59C18519, hydraulic C-frame press, dual hand lever control, #A2259 Camera icon Visit Dealer's Equipment Listing  
8 Ton, Denison Multipress #W5087LC309551, hydraulic, 21" V/S rotary table, #8528 Camera icon  Visit Dealer's Equipment Listing  
8 Ton, Hannifin #OGF8B-8-2-2-PB6, 12" stroke, dual palm control, air oil clr, 7-1/2 HP, #7016 Camera icon  Visit Dealer's Equipment Listing  
8 Ton, Multipress #WR87M, 12" stroke, dual push button control, tonnage gauge, #9122 Camera icon  Visit Dealer's Equipment Listing  
10 Ton, Hannifin #F101-11, 10" stroke, hydraulic, hand lever control, #9124 Camera icon  Visit Dealer's Equipment Listing  
12 Ton, Denison #M5P12, Multipress hydraulic press, 12" stroke, #9121 Camera icon  Visit Dealer's Equipment Listing  
20 Ton, Hannifin #F101, dual hand control, pressure ga., 5 HP, serial #C42750, #7878 Camera icon  Visit Dealer's Equipment Listing  
25 Ton, Denison #KA25C92D24, hydraulic C-frame press, dual palm controls, #A2265 Camera icon Visit Dealer's Equipment Listing  
50 Ton, Denison #FN50 Multipress, hydraulic, 29" x 20" bed, #9108 Camera icon  Visit Dealer's Equipment Listing  
50 Ton, Hannifin #500-41, tonnage gauge, 15 HP, serial #D31940, #6649 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Sheng #SJ-100, C-frame hydraulic press, dual palm controls, Forwell 2 ton die clamping system, foot pedal, #A2886 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, HYDRAULIC SHOP, H-FRAME
50 Ton, K.R Wilson #50MDI, hydraulic H-frame press, #8455 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Dake #75A, motorized, hydraulic, H-frame, movable work head, manual crank table lift, electric foot pedal, #A1472 Camera icon Visit Dealer's Equipment Listing  
75 Ton, Dake #75H, hydraulic H-frame, electric, pressure gauge, manual crank table lift, up/down joystick, #A2815 Camera icon Visit Dealer's Equipment Listing  
75 Ton, Dake #75H, hydraulic H-frame press, hand, moveable work head, manual crank table lift, pressure gauge, #A1499 Camera icon Visit Dealer's Equipment Listing  
300 Ton, H-Frame hydraulic press, hydraulic ram, hydraulic table raise & fall, #A2900 Camera icon Visit Dealer's Equipment Listing  

PRESSES, LAMINATING (Also See Presses, Molding Compression)
7.5 Ton, Wabash hand operated hydraulic press, platens, top & bottom ga., hydraulic hand pump, #3631 Camera icon  Visit Dealer's Equipment Listing  
30 Ton, PHI #30R1818E4ECS-L-YS7P, SS temp.ctrls deg.deviation scales, 1-1/2 HP, #4961 Camera icon  Visit Dealer's Equipment Listing  
125 Ton, PHI #125-985-5-Z2-D, credit card hyd.laminating press w/steam htd pltn, #A2301 Camera icon   Visit Dealer's Equipment Listing  
125 Ton, PHI #S125R3024S-11CC-K-Z55-L, credit card 4 post hyd.laminating press, #A2302 Camera icon   Visit Dealer's Equipment Listing  

PRESSES, MOLDING COMPRESSION HYDRAULIC (Also See Presses, Laminating)
113 Ton, Williams-White, 18" stroke, (2)heated platens, 600 deg., single acting ram, 7-1/2 HP, #5770 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, O.B.I., BACK GEARED, DOUBLE CRANK
100 Ton, Rousselle #10K60, back geared twin drive double crank press, auto lube sys, A/C & brake, #A3512 Visit Dealer's Equipment Listing  

PRESSES, O.B.I., BACK GEARED, SINGLE CRANK
20 Ton, Perkins #351B, 2" stroke, air trip, mech.clutch, Littell dial feeder, 2 HP, #7325 Camera icon  Visit Dealer's Equipment Listing  
20 Ton, Perkins #351-B, OBI press, 2" stroke, air trip mech.clutch, Littel #50045 dial feeder, 2" stroke, dual palm control, #A1954 Camera icon Visit Dealer's Equipment Listing  
32 Ton, Bliss O.B.I. punch press, 4" stroke, foot pedal, air trip mechanical clutch, Rockford safety controls, #A2478 Camera icon Visit Dealer's Equipment Listing  
60 Ton, Bliss #215, 3" stroke, air trip, mech.clutch, BG, 5 HP, serial #H17064, #6263 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Bliss #C60B, 6" stroke, A/C & brake, dual air counter bal., BG, 7-1/2 HP (2), #5883 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Bliss #C60B, 6" stroke, air clutch & brake, 35" x33" bed, counter balance, #5884 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Clearing #6, 4" stroke, V/S, A/C & brake, emergency stop, auto lube, 5 HP, #6279 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Federal #5, 4" stroke, air clutch & brake, BG, sgl.ctrl, dual palms, emergency stop, 5 HP, #6251 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Johnson #55, mech.clutch & brake, sgl.back geared, inclining tie rods, 5 HP, #3591 Camera icon  Visit Dealer's Equipment Listing  
65 Ton, Walsh #65, mech.clutch & brake, BG, V/S drive, equip.for KO, auto.str., 5 HP, #2737  Visit Dealer's Equipment Listing  
90 Ton, Johnson, 6" stroke, cushion, geared, air clutch, #4219 Camera icon  Visit Dealer's Equipment Listing  
110 Ton, Bliss #C110, 10" stroke, air clutch & brake, power ram adj., 42" x27" bed, 1991, #7903 Camera icon   Visit Dealer's Equipment Listing  
121 Ton, Aida #PP-XGC100SU, air clutch & brake, manual ram adj, T-slotted bolster plate, 10 HP, #4965 Camera icon  Visit Dealer's Equipment Listing  

PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK
3 Ton, Kenco Kompac Taber #3K-7-125, forming/cut-off press, 1" , foot pedal, #A3287 Visit Dealer's Equipment Listing  
4 Ton, Kenco #4, punch press, 1" stroke, electrical magnetic solenoid dual finger push button, control, #A2392 Visit Dealer's Equipment Listing  
5 Ton, Benchmaster #152, stand, stroke counter, mech.clutch, includes clean, paint, & cycle, #A3214 Camera icon Visit Dealer's Equipment Listing  
5 Ton, Kenco #5K-100, OBI flywheel punch press, 1" stroke, manual hand trip lever, #4149 Camera icon Visit Dealer's Equipment Listing  
7 Ton, Kenco # 7-1/2, OBI punch press, 1" stroke, electric trip mechanical clutch, dual palm buttons, #7192 Camera icon Visit Dealer's Equipment Listing  
7.5 Ton, M.A. Custom OBI press, mechanical clutch, 1" stroke, foot pedal, #8259 Camera icon Visit Dealer's Equipment Listing  
10 Ton, Benchmaster #191, gap frame OBI punch press, hand lever control, #A2233 Camera icon  Visit Dealer's Equipment Listing  
10 Ton, Perkins #2A, mechanical OBI punch press, 1" stroke, stand, Bijur One Shot lubrication system, Rapid 1-1/2" air feed, #A1957 Camera icon Visit Dealer's Equipment Listing  
10 Ton, Perkins #2A, punch press, 1" stroke, stand, electric foot pedal, Reeves vari-speed drive, air clutch, #A1956 Camera icon Visit Dealer's Equipment Listing  
10 Ton, Sangiacomo #T10CE Eccentric Gooseneck C-frame punch press, air clutch, foot pedal, pneumatic control, #A3285 Camera icon Visit Dealer's Equipment Listing  
10 Ton, Sangiacomo #T10CE, OBI eccentric gooseneck C-frame press, A/C, #A3284 Camera icon Visit Dealer's Equipment Listing  
22 Ton, V & O High Speed OBI punch press, 2" stroke, emergency stop, foot pedal, air clutch & brake, #A2262 Camera icon Visit Dealer's Equipment Listing  
25 Ton, Hidaka Mark 25, light curtain, hydraulic overload protection, dual counterbalance, 1986, #8142 Camera icon  Visit Dealer's Equipment Listing  
25 Ton, Rousselle #3, 3" stroke, air clutch & brake, 20" x 14" bed, #8475 Camera icon  Visit Dealer's Equipment Listing  
30 Ton, Bliss #20, OBI punch press, 3" stroke, mechanical clutch, foot pedal, #A1097 Camera icon Visit Dealer's Equipment Listing  
30 Ton, Bliss #21, 2-1/2" stroke, elec.trip mech.clutch, straightener, air feeder, 2 HP, #6191  Visit Dealer's Equipment Listing  
32 Ton, Minster #4, OBI punch press, 4" stroke, air clutch & brake, 24" x 15" x 2-1/2" bolster plate, dual palm control, #A2254 Camera icon Visit Dealer's Equipment Listing  
32 Ton, Minster #4, air clutch & brake, 24" x15" x2-1/2" bolster, auto lube, air reg. & filter, #7103 Camera icon  Visit Dealer's Equipment Listing  
32 Ton, Minster #4, air clutch & brake, 24" x 15" bed, #7104 Camera icon  Visit Dealer's Equipment Listing  
35 Ton, Bliss #C35, 3" stroke, air clutch & brake, Bliss cushion, dual palm control, #A1941 Camera icon Visit Dealer's Equipment Listing  
35 Ton, Bliss #C35, OBI punch press, 3" , air clutch & brake, auto lube, dual palm control, top stop, emergency stop, foot pedal, #A2155 Camera icon Visit Dealer's Equipment Listing  
45 Ton, Bliss #21-1/2, OBI punch press, 4" stroke, air trip mechancial clutch, dual palm buttons, #A1943 Camera icon Visit Dealer's Equipment Listing  
45 Ton, Niagara #A3-1/2, air clutch & brake, air counter balance, auto lube, 5 HP, serial #38290, #6338 Camera icon  Visit Dealer's Equipment Listing  
45 Ton, Niagara #AF3-1/2, air clutch & brake, 10" feeder, outboard support, dual palm control, 5 HP, #5955 Camera icon   Visit Dealer's Equipment Listing  
45 Ton, Stamtec #G1-45, OBS punch press, A/C, sgl stroke operation, 3.15" , continuous oper.selection, dual palm control, 1999, #A2518 Camera icon  Visit Dealer's Equipment Listing  
55 Ton, YMG #YMGP-55A, 4" stroke, air clutch & brake, 29" x 18" bed, #8473 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Bliss #21-1/2, OBI punch press, 3" stroke, air trip mechanical clutch, #A2248 Camera icon Visit Dealer's Equipment Listing  
60 Ton, Bliss #C60, 3" stroke, air trip mech.clutch, auto lube, 5 HP, serial #H55082, #7564 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Bliss #C60, air clutch & brake, dual air counterbalance, auto lube, 10 HP, 1991/3, #8113 (2) Camera icon   Visit Dealer's Equipment Listing  
60 Ton, Clearing #60, air clutch & brake, dual air counter balance, 5 HP, serial #57-9050, #6335 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Clearing Torc Pac 60, air clutch & brake, bed & ram bolster, palm button, guards, 5 HP, #3514 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Niagara #A4, 3-1/2" stroke, air trip mech.clutch, dual palm control, 5 HP, serial #38546, #7340 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Niagara #AA4, air clutch & brake, air counter balance, surge tank, 5 HP, serial #38002, #5875 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Niagara #AA4PL, air clutch & brake, air counter balance, 5 HP, serial #33861, #5876 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Niagara #AF4S, air clutch & brake, counter balance, surge tank, auto lube, 5 HP, serial #37445, #5880 Camera icon   Visit Dealer's Equipment Listing  
60 Ton, Niagara #M60, 4" stroke, air clutch & brake, dual palm control, surge tank, cushion, 5 HP, #7339 Camera icon   Visit Dealer's Equipment Listing  
60 Ton, Rousselle #6, OBI punch press, air clutch & brake, One Shot, #8821 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Ameteep #PUX, air clutch & brake, dual air counter balance, surge tanks, #5781 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Bliss #C75, air clutch & brake, power ram adj., dual counterbalance, curtain, 1980, #8118 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Niagara #A75, mech.clutch & brake, air cushion, air activated, palm button, 7-1/2 HP, #3807 Camera icon  Visit Dealer's Equipment Listing  
75 Ton, Niagara #E75, air clutch & brake, auto lube, air counter balance, power ram adj., 7-1/2 HP, #6332 Camera icon  Visit Dealer's Equipment Listing  
80 Ton, Federal #7, air clutch & brake, air counter balance, auto lube, dual palm control, 7-1/2 HP, #8149 Camera icon  Visit Dealer's Equipment Listing  
110 Ton, Bliss #C110, A/C & brake, pwr.ram adj., dual air counterbalance, ' 91, #7903 Camera icon   Visit Dealer's Equipment Listing  

PRESSES, STRAIGHT SIDE, DOUBLE CRANK (Single Action)
60 Ton, Bliss #106FW, A/C open back dbl.crank inclinable punch press, 5" stroke, dual palm control, vari-speed, SPM indicator, #A2459 Camera icon  Visit Dealer's Equipment Listing  
60 Ton, Bliss #660D HP38525, high production, SSDC punch press, 3" stroke, 47" x 18-1/2" bed, air clutch & brake, #A1939 Camera icon Visit Dealer's Equipment Listing  
100 Ton, Rousselle #10S40, 6" str, A/C & br, curtains, pwr.ram adj, countr.bal, #8562 Camera icon  Visit Dealer's Equipment Listing  
100 Ton, Rousselle #10S60, air clutch & brake, curtains, power ram adj, counter-balance, 1975, #8561 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, Chicago straight side double crank punch press, 84" x 48" bed, air clutch & brake, dual palm control, #A1968 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, Heim #S150, 4" stroke, 42" x 60" T-slotted plate, air clutch & brake, motor.ram adj, 15 HP, #5915 Camera icon   Visit Dealer's Equipment Listing  
150 Ton, Heim #S150, power ram adj., mag.starter, auto.lube, air clutch & brake, 15 HP, #3546 Camera icon  Visit Dealer's Equipment Listing  
150 Ton, Verson #C2-150-48-36, air clutch & cushion, double roll feed, scrap chopper, 3 dia KO, #2903 Camera icon  Visit Dealer's Equipment Listing  
175 Ton, Heim #175-42-78, 6" , dual air counterbal, ram indic.pwr.slide adj, #6120 Camera icon   Visit Dealer's Equipment Listing  
300 Ton, Rousselle #B2-300-60-30, 4" , air counterbalances, reinforced box bed, A/C, #A3359 Camera icon Visit Dealer's Equipment Listing  

PRESSES, STRAIGHT SIDE, SINGLE CRANK (Single Action)
100 Ton, Minster #S1-100-24-30, press, air clutch & brake, #8745 Camera icon  Visit Dealer's Equipment Listing  

PRINTING MACHINERY & EQUIPMENT
Minolta #EP3000 CSPRO, copy machine, #9920 Camera icon Visit Dealer's Equipment Listing  

PUMPS
CENTRIFUGALS (Including Boiler Feed Pumps)
550 GPM @ 321' TDH, Bell & Gossett #1510-3E, centrifugal pump station, #A2566 Camera icon  Visit Dealer's Equipment Listing  
550 GPM @ 321' TDH, Bell & Gossett #1510-3E, centrifugal pump station, #A2567 Camera icon  Visit Dealer's Equipment Listing  

PUNCHES, FABRICATOR (Also See Fabricators)
30 Ton, Strippit Super #30/30, fabricator, #6882 Camera icon  Visit Dealer's Equipment Listing  
30 Ton, Whitney #635A, single end fabricating punch, #7260 Camera icon  Visit Dealer's Equipment Listing  
50 Ton, Whitney #652-50, single end punch, 1977, #7206 Camera icon  Visit Dealer's Equipment Listing  

PUNCHES, PORTABLE, FLANGE & WEB
8 Ton, Rotex hand turret punch, 2" , cut-off shear, punches & dies, stand, #A1453 Camera icon Visit Dealer's Equipment Listing  
18 Ton, Whitney #606-166, shear & portable punch, #6887 Visit Dealer's Equipment Listing  

PUNCHES, PUNCHES & SHEARS, SINGLE END
4 Ton, DiAcro #2, hand punch, #8306 Camera icon Visit Dealer's Equipment Listing  
4 Ton, DiAcro #2, manual C frame hand punch, custom front/side manual gauges, #A3218 Visit Dealer's Equipment Listing  
50 Ton, Montgomery #T50D ATS, CNC punch, Punch-Mate CNC control, foot pedal, 1994, #A2384 Visit Dealer's Equipment Listing  

PUNCHES, TURRET (Also See CNC Machinery & Equipment, Punches, Turret)
5 Ton, Wiedemann #R2, hand turret punch, punches & dies, 3/8" , 7/16" , 5/8" , 1/4" , 1/8" , 1" , 7/8" , 1/2" , 5/16" , 3/16" , #A2944 Camera icon Visit Dealer's Equipment Listing  
30 Ton, Amada #IW-304, hydraulic turret punch, 5 punching dies, power turret, #6684 Camera icon  Visit Dealer's Equipment Listing  

REFRIGERATION EQUIPMENT (Also See Compressors, Refrigeration)
Walk-In refrigeration unit w/cooler, 8' x 10' , note this unit has beed disassembled and is ready for shipment, #A2589 Camera icon  Visit Dealer's Equipment Listing  

ROLLFORMERS (Also See Sheet Metal Machinery)
4 Stand, Lockformer #20, 20 ga., Pittsburg machine, double seam rolls, double seam lock rolls on outboard side, #A2035 Camera icon Visit Dealer's Equipment Listing  
5 Stand, Engel #R-DC150, roll former, #8063 Camera icon  Visit Dealer's Equipment Listing  
5 Stand, Lockformer rollformer, #A2616 Camera icon Visit Dealer's Equipment Listing  
5 Stand, Maplewood Pittsburgh #T Roll Former, 20 ga., #7668 Camera icon  Visit Dealer's Equipment Listing  
7 Stand, Custom rollFormer, #5652 Visit Dealer's Equipment Listing  
9 Stand, Ardcor #SF, tooled for 1" seam lock steel tubing, cut-off, #5096 Camera icon  Visit Dealer's Equipment Listing  
9 Stand, Lockformer #9, duplex, 6" -28" roll space, #4327 Camera icon Visit Dealer's Equipment Listing  
9 Stand, Lockformer #L-9, rollformer, 7/8" shaft diameter, 4" wide, spray mist, lube, #9425 Camera icon   Visit Dealer's Equipment Listing  

ROLLS, ANGLE BENDING
3" x 3" x 3/8" Buffalo #1, heavy duty mechanical angle roll, large rack of tooling, foot pedal, #A2299 Camera icon Visit Dealer's Equipment Listing  
Foote Brothers #WV-2, angle roll, #A2950 Camera icon Visit Dealer's Equipment Listing  

ROLLS, PLATE BENDING, INITIAL & DOUBLE PINCH TYPE
30" x 22 ga. Pexto #63F, bar folder, #A3156 Visit Dealer's Equipment Listing  
3' x 22 ga. Pexto #390D, powered slip roll, stand, foot pedal, #A2485 Camera icon Visit Dealer's Equipment Listing  
4' x 16 ga. Acra #FR-S5016, hand operated slip roll, stand, #SMFRS5016 Camera icon Visit Dealer's Equipment Listing  
4.2' x 10 ga. T.S.M.C, powered plate rolls, forward/reversing switch, manual drop end, LED position indicator, #A2383 Camera icon  Visit Dealer's Equipment Listing  
6' x 10 ga. Milton, manual drop & rear roll adj., emerg.stop, 7-1/2 HP, #6392 Camera icon  Visit Dealer's Equipment Listing  
6' x 1/4" Niagara #7-72, manual front roll adj, pwrd.rear roll adj, emergency stop, auto lube system, foot pedal, #A3190 Visit Dealer's Equipment Listing  
6' x 1/2" Webb #6L-54, 3 roll initial pinch plate roll, air drop end, one shot lube system, forward reverse hand control, #A2768 Camera icon Visit Dealer's Equipment Listing  
8' x 10 ga. Pexto #SD509, plate roll, air operated power rear roll adjustment, manual drop end, #A1736 Camera icon  Visit Dealer's Equipment Listing  
8' x 1/4" Lown #B-600, initial pinch pwr roll, air drop end, pwr rear roll adj., #A3142 Visit Dealer's Equipment Listing  
8' x 3/8" Davi #MCA-2522, double pinch 4-roll plate roll forming machine, hyd.drop end, hyd.Yoke, #A3371 Camera icon Visit Dealer's Equipment Listing  

SANDERS (Also See Woodworking Machinery)
BELT SANDERS (Also See Grinders, Belt)
1" Kalamazoo belt sander, stand, 1 phase motor, #A1115 Camera icon Visit Dealer's Equipment Listing  
4" x 132" Curtis #BS4, horizontal belt sander, #8691 Camera icon Visit Dealer's Equipment Listing  
6" x 260" Mattison #H6, horizontal belt sander, 5 HP motor, #8179 Camera icon Visit Dealer's Equipment Listing  
6" Wintersteiger #CEM360, Horizontal Wet Belt Sander, 1988, #7437 Camera icon  Visit Dealer's Equipment Listing  
8" x 77" Newton #E-30, oscillating universal edge sander, #9968 Camera icon  Visit Dealer's Equipment Listing  
16" Max Disk Sander #165, table elevating mechanism, tilting table, #A1718 Camera icon Visit Dealer's Equipment Listing  
52" AEM #75-52/3 HDWood w/103, 3 head wide belt (wood sander), emergency stop bar, power elevation tbl, elec.tracking, #A2460 Camera icon  Visit Dealer's Equipment Listing  
52" Sandingmaster #SCSB-3-1300, wide belt 3 head grinder/sander, wood working machine, #A2332 Camera icon  Visit Dealer's Equipment Listing  

SAWS, BAND, HORIZONTAL (Also See Vertical Band Saws)
8" x 10" Continental #BS-100M, horizontal band saw, hydraulic tank & pump, #A3503 Visit Dealer's Equipment Listing  
11" x 18" Dake Johnson #JH10, horizontal band saw, coolant system, work length stop, 1 HP, #A2488 Camera icon Visit Dealer's Equipment Listing  
12" x 12" DoAll #C305A, horizontal band saw, coolant system, motion detector, flushing hose, powered chip conveyor, #A3108 Camera icon Visit Dealer's Equipment Listing  
12" x 13" DoAll #C-1213M, semi-automatic horizontal band saw, hyd.band tension, 16" heat treated ductile iron wheels, vise, #A2516 Camera icon  Visit Dealer's Equipment Listing  
12" x 16" DoAll #C-1216M, semi-automatic horizontal band saw, chip auger, hydraulic bar feed, chip brush, #A2708 Camera icon Visit Dealer's Equipment Listing  
16" x 16" DoAll #C4100NC, fully auto horiz.bandsaw, vari-spd, work light, clnt.sys, #A3294 Visit Dealer's Equipment Listing  
25" x 25" DoAll #C2525A, horizontal double column heavy duty fully automatic band saw, coolant system, #A2649 Camera icon  Visit Dealer's Equipment Listing  

SAWS, BAND, VERTICAL (Also See Horizontal Band Saws)
18" x 26" Marvel #81/M9, vertical tilting bandsaw, hydraulic lift cylinders, hydraulic vise, #A3434 Camera icon Visit Dealer's Equipment Listing  
18" Peerless #1820XLA, hydraulic bar feed/tilt, vise, dig.speed indicator, 3 HP, s/n #C026611-95, #7893 Camera icon  Visit Dealer's Equipment Listing  
19.5" Davis & Wells #DB20-64, vertical band saw (wood), mitering protractor, foot pedal brake, #9405 Camera icon  Visit Dealer's Equipment Listing  
20" Kalamazoo Startrite #20RFW, vertical bandsaw, chip blower, work lamp, parts machine only, #A2370 Camera icon Visit Dealer's Equipment Listing  
20" Powermatic #87, vertical band saw, blade welder, blade grinder, high/low transmission, #A2580 Camera icon Visit Dealer's Equipment Listing  
23" American vertical woodworking saw, #A2479 Camera icon Visit Dealer's Equipment Listing  
24" Grob #NS24, vertical bandsaw, blade welder, blade shear, foot brake, worklight, gravity feed, air chip blower, #A3196 Visit Dealer's Equipment Listing  
26" DoAll #2613-3, vertical deep throat (heavy duty) band saw w/hydraulic power table feed & tilt, blade welder, #A2907 Camera icon Visit Dealer's Equipment Listing  
26" DoAll #V-26, vertical bandsaw, blade welder, blade grinder, blade cut off tool, speed indicator, chip blower, mech.feed, #A3238 Camera icon Visit Dealer's Equipment Listing  
36" DoAll Zephyr #36-W, vertical band saw, blade welder/cutter/grinder, deep throat, #A3035 Camera icon Visit Dealer's Equipment Listing  
36" DoAll #V-36, vertical deep throat band saw, blade welder, blade grinder, high-low gear box, #A2480 Camera icon Visit Dealer's Equipment Listing  
36" DoAll #V-36, vertical deep throat band saw, hydraulic table power feed, high-low geared transmission, #A2772 Camera icon  Visit Dealer's Equipment Listing  
36" DoAll Zephyr #ZV-3620, vertical sawing & friction cutting band saw, blade welder, grinder, work light, deep throat, #A3050 Camera icon Visit Dealer's Equipment Listing  

SAWS, COLD, FRICTION AND CARBIDE
10" Everett #100025, abrasive chop saw, pneumatic vise, push button start, stand, #A3488 Visit Dealer's Equipment Listing  
12" Soco #MC275AC, semi-automatic miter cold saw, auto cutting cycle, automatic clamping, #A2748 Camera icon Visit Dealer's Equipment Listing  
14" Dake Tiger #350SX, semi-automatic geared head cold saw, automatic/manual air vise, coolant system, mitering, bar stop, #A3024 Camera icon Visit Dealer's Equipment Listing  
14" Kalamazoo #KM14W, wet abrasive chop saw, stand, pneumatic holddowns, miter cutting, made in USA, #A3489 Visit Dealer's Equipment Listing  
14" Soco #MC-350NFA, fully automatic circular coldsaw, Sargon digital readout, dust collector system, spray mist, #A3428 Camera icon Visit Dealer's Equipment Listing  
14" Thomas #115, semi-automatic cold saw, air head feed, air vise, mitering, coolant, #A1452 Camera icon Visit Dealer's Equipment Listing  
36" Trennjaeger #lkh310/1000, traversing circular cold saw, extra blades, #A2949 Camera icon Visit Dealer's Equipment Listing  

SAWS, MITRE
14" Alfa #T350, double mitre, left & right table extensions, 47" x 8" , dual finger controls, 3 pneumatic clamps, emergency stop, #A2228 Camera icon   Visit Dealer's Equipment Listing  
16" Wegoma #SD16S, double head sliding miter saw, pneumatic holddowns, adjustable feed rates, controller, non-ferrous, #A3491 Camera icon Visit Dealer's Equipment Listing  

SAWS, PLATE
Cain #45-9-8-HLS, Plate Saw, 16" x 8' , #6603 Camera icon  Visit Dealer's Equipment Listing  
Delta horizontal plate saw, 8" x 48" , #5309 Visit Dealer's Equipment Listing  

SCRAP YARD MACHINERY & EQUIPMENT
BRIQUETTERS, HYDRAULIC, Scrap Yard (Also See Chip Processing Systems)
No. 275 PuckMaster, Tipmaster loading sys, hi-pressure control valves, 2006, #A1451 Camera icon   Visit Dealer's Equipment Listing  

SCRAP YARD MACHINERY & EQUIPMENT
SHEARS, ALLIGATOR
6" Alligator shear machine, #A2307 Camera icon Visit Dealer's Equipment Listing  
12" Alligator shear, forward/reverse, foot pedal, #A2399 Camera icon  Visit Dealer's Equipment Listing  
18" Hill-Acme Canton #CF22A, alligator shear, 1-1/4" x 18" , air clutch, electric foot pedal, #A2588 Camera icon Visit Dealer's Equipment Listing  

SHEARS, FOOT (Also See Sheet Metal Machinery)
16 ga. x 36" DiAcro #36K, manual foot shear, (2) front supports, manual back gauge, manual hold down, #A3211 Camera icon Visit Dealer's Equipment Listing  
16 ga. x 4' Pexto Foot Stomp Shear #152-J, Manual, #A3325 Visit Dealer's Equipment Listing  
16 ga. x 4' Pexto #152-K, foot shear, Ser.#1074, #A3449 Camera icon Visit Dealer's Equipment Listing  

SHEARS, HAND
Kepro #K106, PCB hand shear, 16 ga. x 12" , designed for cutting circuit boards & copper materials, #A3063 Visit Dealer's Equipment Listing  
Niagara Hand circle shear, antique, #A1719 Camera icon Visit Dealer's Equipment Listing  
Whitney hand shear, 2-1/2" angle shear, 2" plate bender, #A2628 Camera icon Visit Dealer's Equipment Listing  

SHEARS, POWER SQUARING AND PLATE (GAUGES)
18 ga. x 3' Famco #136, power shear, front operated manual back gauge with indicator, electric foot pedal, #A2001 Camera icon Visit Dealer's Equipment Listing  
16 ga. x 3.1' Pexto #PH-37, hydraulic power shear, ROMBG, foot pedal, hyd.tank, #A3498 Camera icon Visit Dealer's Equipment Listing  
16 ga. x 4' DiAcro #48, power shear, ROMBG, foot pedal, #A3528 Visit Dealer's Equipment Listing  
16 ga. x 4' Pexto #G52A, hydraulic, ROMBG, foot pedal, manual holddowns, #A2630 Camera icon Visit Dealer's Equipment Listing  
14 ga. x 4' Niagara #14, pwr squaring shear, Bijur auto lube, foot pedal, FOMBG, #A3148 Visit Dealer's Equipment Listing  
14 ga. x 4' Wysong #1452, power shear, ROMBG, sq.arm, front supports, One Shot lube, foot treadle, #A1987 Camera icon  Visit Dealer's Equipment Listing  
14 ga. x 8' Birmingham #H-0825, hyd.shear, (2) front supports, foot pedal, ROMBG, 2002, #A3474 Camera icon  Visit Dealer's Equipment Listing  
12 ga. x 4' Pexto #12-U4H, power shear, rear operated manual back gauge, 2-front supports, #A1439 Camera icon   Visit Dealer's Equipment Listing  
12 ga. x 4' Wysong #1252, power shear, rear operated manual back gauge, #6735 Camera icon Visit Dealer's Equipment Listing  
12 ga. x 4' Wysong #1252, power shear, rear operated manual back gauge, square arm, One Shot lube system, supports, #9451 Camera icon Visit Dealer's Equipment Listing  
12 ga. x 4' Wysong #1252, power shear, FOMBG, 42" sq.arm, One Shot lube system, 2-front supports, foot treadle, #A3196 Visit Dealer's Equipment Listing  
12 ga. x 4' Wysong #1252, power shear, FOMBG, 48" extended back gauge, magnetic material support, foot treadle, sq.arm, #A3414 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 6' Cincinnati Century #1072 W Series, mechanical shear, FOMBG, one shot lube, foot pedal, sq.arm, stroke counter, #A3322 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 6' Wysong #1072, power shear, fr.materl.conv, air clutch, microsw.control, 5 HP, serial #P4-309, #4891 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 6' Wysong #1072, power shear, 2 front supports, FOPBG w/indicator, squaring arm, air trip clutch, #A1992 Camera icon   Visit Dealer's Equipment Listing  
10 ga. x 8' Cincinnati #1008, power shear, ROMBG, supports, air trip clutch, #8642 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 8' Komatsu #SHS3X255, FOPBG, indicator, sq.arm, stroke length control, (2) front supports, #A3321 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 8' Pexto #10-U-8, power shear, front operated manual back gauge with indicator, square arm & supports, #A1147 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 10' Cincinnati #1010, power shear, FOPBG w/indicator, magnetic sheet supports, auto lube system, #9515 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 10' Cincinnati #1010, power shear, front & rear power ga, squaring arm, supports, auto lube, 5 HP, #7379 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 10' Hoan Energol #CHE3000/6, hydraulic shear, FOPBG, indicator, 1974, #9049 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 10' Pearson #1010, hydraulic shear, FOPBG, in/mm indicators, squaring arm, front supports, holddowns, #9787 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 10' Promecam #GTH430, hyd.power shear, front & rear gauges, electricl foot pedal, FOPBG, material selector switch, #A2003 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 10' Wysong #1010, power shear, front operated power back gauge, square arm, front supports, #A1268 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 10' Wysong #1010, power shear, front operated power back gauge, 2 front supports, foot pedal, one shot lube, #A3332 Camera icon Visit Dealer's Equipment Listing  
10 ga. x 10' Wysong #1010HD, power shear, Siemens PLC prog.BG w/encoder, sq.arm, front supports, auto lube, #9666 Camera icon  Visit Dealer's Equipment Listing  
10 ga. x 10' Wysong #1010RD, power shear, square arm, supports, mech.clutch, #A2206 Camera icon  Visit Dealer's Equipment Listing  

SHEARS, POWER SQUARING AND PLATE (INCHES)
3/16" x 6' Wysong #722, heavy duty frame power square shear, front operated precision back gauge, auto lube, #A2105 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 8' Cincinnati #1008R, power shear, FOPBG, 8' squaring arm, 2-80" front supports, air trip cl, #6396 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 8' Lodge & Shipley #0308, power shear, FOPBG w/ind., air clutch, #8433 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 10' Amada #M3045, power shear, FOPBG, 10' squaring arm, front supports, one shot lube system, foot pedal, #A2694 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 10' Elga Hydrapower #10316, hydraulic shear, FOPBG w/indicator, square arm, #9114 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 10' Lodge & Shipley #0310-SL, power squaring shear, FOPBG, Bijur auto oil lubrication, electric foot pedal, #A2864 Camera icon  Visit Dealer's Equipment Listing  
3/16" x 10' Wysong #1096-HD, heavy duty power shear, oversized flywheel, heavy duty knife bar, gearbox, foot treadle, #A2715 Camera icon Visit Dealer's Equipment Listing  
1/4" x 6' Famco #2575, mechanical, 24" deep throat shear, 1993, #A2747 Camera icon Visit Dealer's Equipment Listing  
1/4" x 6' Niagara #76B-1/4, power shear, FOPBG, indicator, foot treadle, #A3189 Visit Dealer's Equipment Listing  
1/4" x 10' Amada #M3060, power shear, FOPBG, inch/metric readout, square arm, front supports, one-lube sys, #C7596 Camera icon Visit Dealer's Equipment Listing  
1/4" x 10' Pacific #FS200-10II, power shear, FOPBG, 10' sq.arm, power rake adj, 20 HP, #7205 Camera icon  Visit Dealer's Equipment Listing  
1/4" x 10' Wysong power squaring shear, air trip mechanical clutch, FOPBG, foot pedal, #A1732 Camera icon  Visit Dealer's Equipment Listing  
1/4" x 12' Cincinnati #1812, power shear, FOPBG w/indicator, square arm, front supports, #A1130 Camera icon Visit Dealer's Equipment Listing  
1/4" x 12' Standard #AS250-12, hydraulic power shear w/programmable back gauge control, squaring arm, foot pedal, #A3510 Camera icon Visit Dealer's Equipment Listing  
3/8" x 6' Cincinnati #2506R, FOPBG w/ind., sq.arm, supports, dual counter balance, #9719 Camera icon  Visit Dealer's Equipment Listing  
3/8" x 6' Donewell #3/8-6, hydraulic power shear, FOPBG w/indicator, front supports, electric foot pedal, power rake adj., #A2866 Camera icon Visit Dealer's Equipment Listing  
3/8" x 10' Betenbender #375-10, hydraulic, 52" squaring arm, FOPBG, Durant digital keypad, #A3118 Camera icon Visit Dealer's Equipment Listing  
3/8" x 10' Cincinnati #2510G, power shear, programmable FOPBG, square arm, dual counter balance, #A1151 Camera icon Visit Dealer's Equipment Listing  
3/8" x 12' Lodge & Shipley #5-0612, heavy duty power shear, FOMBG w/indicator, foot pedal, #A2713 Camera icon Visit Dealer's Equipment Listing  
3/8" x 16' Pacific #375R, FOPBG, pwr.rack angle adj, 16' sq.arm, 2-fr.support arms, #4260 Camera icon  Visit Dealer's Equipment Listing  
1/2" x 4' W.A. Whitney #606-052, hydraulic shear, 18 ton, push button control, #5990 Camera icon  Visit Dealer's Equipment Listing  
1/2" x 6' Lodge & Shipley #0806, FOMBG w/indicator, spare shear blade, #A2834 Camera icon Visit Dealer's Equipment Listing  

SHEET METAL & HVAC MACHINERY (Also See Brakes)
BEADERS & CRIMPERS
20 ga. Pexto #0585H, hand crimper/beader, 2-3/4" , crimping dies, #A2043 Camera icon Visit Dealer's Equipment Listing  
Niagara hand crimper & beader machine, beading dies, #A2166 Camera icon Visit Dealer's Equipment Listing  
Pexto #525A, hand crimper & beader machine, beading dies, #A2165 Camera icon Visit Dealer's Equipment Listing  

SHEET METAL & HVAC MACHINERY (Also See Brakes)
CLEAT BENDERS
Lockformer #18 hand cleat bender, 20ga. x 18" , heavy duty stand, #A3155 Visit Dealer's Equipment Listing  

SLITTERS (Also See Plastic & Rubber Equipment)
19" x 16 ga. Pexto & Wilcox #225SD, powered slitter machine, stand, 110 V., 1 phase, #A1779 Camera icon Visit Dealer's Equipment Listing  
60" x 16 ga. Iowa #ESLR6016, precision slitter line, 2 station drop end uncoiler, 1988, #A1542 Camera icon  Visit Dealer's Equipment Listing  

STORAGE EQUIPMENT (Cabinets and Tables)
Equipto Cabinet, 2 drawers, 25" x 25" x 6" , #9872 Camera icon Visit Dealer's Equipment Listing  
Heavy duty cabinet, 15 drawer, locks on all drawers, #A1751 Camera icon Visit Dealer's Equipment Listing  
Heavy duty parts cabinet, 8 drawer, #A2794 Camera icon Visit Dealer's Equipment Listing  
Heavy duty parts cabinet, 6 drawer, stand, #A2795 Camera icon Visit Dealer's Equipment Listing  
Heavy duty parts cabinet, 5 drawer, #A3007 Camera icon Visit Dealer's Equipment Listing  
Heavy duty parts cabinet with (6) swing out drawers, #A3008 Camera icon Visit Dealer's Equipment Listing  
Heavy duty storage cabinet, 4 drawer, #A2160 Camera icon Visit Dealer's Equipment Listing  
Heavy duty storage cabinet, 6 drawer, #A2161 Camera icon Visit Dealer's Equipment Listing  
Heavy duty tooling & storage cabinet, 7 drawers, #A3113 Visit Dealer's Equipment Listing  
Lista International heavy duty cabinet, 7 drawer, #A2159 Camera icon Visit Dealer's Equipment Listing  
Stanley cabinet, (5) 2" drawers, (2) 3" drawers, (1) 5" drawer, #A2192 Camera icon Visit Dealer's Equipment Listing  
Stanley Vidmar 10 drawer cabinet, 4- 2" drawers, 3- 3" drawers, 3- 4" drawers, #A2701 Camera icon Visit Dealer's Equipment Listing  
Stanley Vidmar cabinet, 2- 2" drawers, 7- 3" drawers, #A2702 Camera icon Visit Dealer's Equipment Listing  
Stanley Vidmar cabinet, 5- 5" drawers, #A2703 Camera icon Visit Dealer's Equipment Listing  
Tooling & storage cabinet, 8 drawers, #A3111 Visit Dealer's Equipment Listing  
Tooling & storage cabinet, 8 drawers, #A3112 Visit Dealer's Equipment Listing  

STRETCH FORMING MACHINES
Eckold #HSP900/20, 36" throat, dual palm control, foot pedal, 2001, #A2145 Camera icon  Visit Dealer's Equipment Listing  

STRETCHING/SHRINKING MACHINES
No. 6F Marchant foot stretching & shrinking machine, 16 ga., set of shrinking jaws, #A1602 Camera icon  Visit Dealer's Equipment Listing  
No. 6FG Marchant foot shrinking & stretching machine, 16 gauge, set of stretching jaws, #A1601 Camera icon  Visit Dealer's Equipment Listing  

SWAGING MACHINES
1-1/2" x 6" Etna #156RA, swager machine, 3/4" solids, #A2026 Camera icon  Visit Dealer's Equipment Listing  
2" Custom hydraulic swager macihne, #A1885 Camera icon  Visit Dealer's Equipment Listing  

TESTING EQUIPMENT (Also See Laboratory & Research Equipment)
ENVIRONMENTAL CHAMBERS
Delta #2850L, 7" x 16" x 7" Environmental Test Chamber, Solid State Controller, Null Detector Circuit, adjustable Camera icon Visit Dealer's Equipment Listing  

THREADERS, PIPE (Includes Nipple Machines,Pipe & Tube Cutters)
1/8" -2" Ridgid #500A, portable electric pipe threader, cut off tool, reamer, universal die head, forward & reverse control, #A2986 Visit Dealer's Equipment Listing  
1/4" -2" Oster #502, threading machine, cut-off tool, 3-Jaw chuck, note: this machine has no die head, #6256 Camera icon Visit Dealer's Equipment Listing  
1/4" -2" Oster #502, threading machine, extra dies, #A2486 Camera icon Visit Dealer's Equipment Listing  
2-1/2" Toledo #999, pipe threading machine, dies, tooling included for pipe, thread & bolt dies, #A1936 Camera icon Visit Dealer's Equipment Listing  

TOOLING & ACCESSORIES
ROTARY TABLES (Also See Rotary Tables, CNC)
24" Kearney & Trecker, horizontal rotary table, #5353 Camera icon  Visit Dealer's Equipment Listing  
48" x 60" Giddings & Lewis #4860, air clamp, indexing, 1966, #6953 Camera icon  Visit Dealer's Equipment Listing  
50" W.B. Knight #50, powered rotary table, Davong DC vari-drive control w/indictaor, #A1261 Camera icon  Visit Dealer's Equipment Listing  

TOOLING & ACCESSORIES
SURFACE PLATES (Also See Floor Plates & Bed Plates)
18" x 24" x 4" Collins MicroFlat surface plate, #A3388 Visit Dealer's Equipment Listing  

TOOLING & ACCESSORIES
MISCELLANEOUS, TOOLING & ACCESSORIES
Copper Plate, round and square, brand new, #A2395 Camera icon Visit Dealer's Equipment Listing  
Stanley Metal Cabinet, full of rectangle Strippit tooling, misc.punches & dies, #A3427 Camera icon Visit Dealer's Equipment Listing  
Stanley Metal Cabinet, full of round Strippit tooling, misc.punches & dies, #A3425 Camera icon Visit Dealer's Equipment Listing  
Stanley Metal Cabinet, full of round Strippit tooling, misc.punches & dies, #A3424 Camera icon Visit Dealer's Equipment Listing  

TUBE END FINISHING & FORMING MACHINES
2.75" Eagle #E2000, tube end former, SLC 500 control, 1995, #8992 Camera icon Visit Dealer's Equipment Listing  

VIBRATORY FINISHERS
3 cu.ft. Roto-Finish #ER-0203 spratron, bowl type vibratory, parts/media seperator, auto lube system, #A3420 Camera icon Visit Dealer's Equipment Listing  
6 cu.ft. Lymac #V600, vibratory deburring machine, tub type, #7783 Camera icon Visit Dealer's Equipment Listing  
6 cu.ft. Rosemont #RD10.6, vibratory cob dryer, parts machine only, needs lining & parts, #6444 Camera icon Visit Dealer's Equipment Listing  
6.5 cu.ft. Almco #V7, rubber lined, 4-chamber o/hd.storage, 3.5' H, full media conv, #2865 Camera icon  Visit Dealer's Equipment Listing  
10 cu.ft. Sweco #FM-10-3, vibratory finishing machine, bowl type, #9030 Camera icon  Visit Dealer's Equipment Listing  
15 cu.ft. Almco #OR15, bowl type, slurry pump, sound encloser, #9194 Camera icon  Visit Dealer's Equipment Listing  
44 cu.ft. Timesaver #V44, slurry system, auto lube, 20 HP, serial #20976G, 1990, #7863 Camera icon  Visit Dealer's Equipment Listing  

WATER TREATMENT EQUIPMENT
Neutralization Tech. Systems, 20 GPM, waste treatment plant, #7658 Camera icon  Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
ARC WELDERS
250 Amps, Miller #Dialarc 250, arc welder, single phase, #9571 Camera icon Visit Dealer's Equipment Listing  
300 Amps, Miller #330A/BP, AC/DC gas tungsten arc welding machine, foot pedal, gun, Bernard cooler, gauges, table welder, #A2938 Camera icon Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
MIG WELDERS
Linde #V1-252, mig welder, 300 amp., Linde MIG 23A wire feed, hand gun, cart & casters, #A1177 Camera icon Visit Dealer's Equipment Listing  
Miller Millermatic #35, mig welder, 150 amp., built-in wire feeder, #A1709 Camera icon Visit Dealer's Equipment Listing  
Miller Millermatic #35, mig welder, 150 amp., built-in wire feeder, gun, regulator, #A1711 Camera icon Visit Dealer's Equipment Listing  
Miller #CP-300, mig welder, 300 amp, Miller 24V wire feeder, hand gun, amp.meter, spool holder, regulator, cart, #A1677 Camera icon Visit Dealer's Equipment Listing  
Miller #Econo Twin, mig welder, 150 amp., #9574 Camera icon Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
PLANISHERS, ROLL WELDERS
Grotnes #1LS, 3/16" x 72" , planish.force pressure, 1/2HP, 230/460V., serial #C5450A, #4675 Camera icon  Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
SPOT, PRESS TYPE WELDERS
20 KVA Acme #1-24-20, spot welder, 24" , Entron control, elec.foot pedal, 440V, single phase, #9171 Camera icon  Visit Dealer's Equipment Listing  
75 KVA Federal #PA1-18124, Entron control, dual palm button, foot pedals, W/C, serial #38565-100, #7058 Camera icon  Visit Dealer's Equipment Listing  
75 KVA Harlo #SC275, spot welder, press type, 30" , Interlock #105 control, single phase, #8396 Camera icon Visit Dealer's Equipment Listing  
100 KVA Acme #3-12-100, univ.horn, swivel low.horn, W/C eject, electrode holders, #2608 Camera icon  Visit Dealer's Equipment Listing  
100 KVA Sciaky #PMCO25TQ-100-36, spot welder, press type, 36" , Technitron #TCS4000 digital control, #8214 Camera icon Visit Dealer's Equipment Listing  
150 KVA Taylor-Winfield #A-W, air oper, water cooled, adj.str, Robotron control, s/n #3893, #3024 Camera icon  Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
SPOT, ROCKER ARM WELDERS
15 KVA West Arctronics #15, electric foot pedal, 69 amop, 208 V., 1 phase, #A1730 Visit Dealer's Equipment Listing  
20 KVA Acme #1-30-20, spot welder, rocker arm type, 12" , Square D controls, air clamp, electric foot pedal, 230 V., #A1336 Camera icon Visit Dealer's Equipment Listing  
20 KVA Acme #2-24-20, spot welder, 24" , Robotron control, #8955 Camera icon Visit Dealer's Equipment Listing  
20 KVA Robotron #3060AB, spot welder, rocker arm type, 15" , Robotron control, air clamp, elec.foot pedal, #9535 Camera icon  Visit Dealer's Equipment Listing  
40 KVA Acme Janda # 3-24-40, rocker type, 24" , Solid State control, #8633 Camera icon  Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
TIG WELDERS
Chemetron #AC/DC300HF, tig welder, #5860 Camera icon  Visit Dealer's Equipment Listing  
Linde #UCC-305, tig welder, water cooler, 300 amp, single phase, #9080 Camera icon  Visit Dealer's Equipment Listing  

WELDING MACHINERY & EQUIPMENT
ULTRASONIC WELDERS
Mecasonic #Omega 1, 2300 W ultrasonic welder, 24" rotary table w/vari-speed control, dual palm control, #6291 Camera icon Visit Dealer's Equipment Listing  

WELDING MANIPULATORS, POSITIONERS & TURNING ROLLS
ROLLS, POWER TANK TURNING
.5 Ton, Be-Co #F400, welding positioner tank roll, 1 power & 3 idler rolls, variable speed, forward/reverse, #A2278 Camera icon Visit Dealer's Equipment Listing  
300 Ton, CME #300HD, tank turning roll driver & idler set, Baldor PLC DC vari-drive control, remote push button hand controls, #A1259 Camera icon  Visit Dealer's Equipment Listing  

WELDING MANIPULATORS, POSITIONERS & TURNING ROLLS
WELDING POSITIONERS
2500 lb. Aronson #STS-2J00, 30" welding positioner, vari-speed rotation, #5001 Camera icon Visit Dealer's Equipment Listing  
3000 lb. Ransome #13, welding positioner, power tilt, vari-speed, foot pedal, center of gravity 12" above table, as is, #A2343 Camera icon Visit Dealer's Equipment Listing  

WIRE MACHINERY
FORMERS, WIRE
Nilson #S1, 4-Slide, 3/32" , #A1588 Camera icon Visit Dealer's Equipment Listing  

WIRE MACHINERY
SPRING COILERS, WIRE
No. W100A Torrington spring coiler wire machine, .003" -.015" , tooling, #A2533 Camera icon Visit Dealer's Equipment Listing  
No. 721 Sleeper & Hartley spring coiler wire machine, Reliance vari-speed drive, tooling, #A2535 Camera icon Visit Dealer's Equipment Listing  
Bennett Tools spring coil making machine, vari-speed drive, #A2534 Camera icon Visit Dealer's Equipment Listing  

WIRE MACHINERY
STRAIGHTENERS & CUT OFF, WIRE
1/16" -3/16" Lewis #2C3-829-6, .095" , .105" , .131" , .138" , .181" , .192" , .225" dies included, 3 supports, Durant counter, #A2071 Camera icon  Visit Dealer's Equipment Listing  
1/16" -3/16" Lewis #2C3-829-6, .130" , .148" , .192" dies included, 5 supports, Durant counter, Timken bearings, #A2073 Camera icon  Visit Dealer's Equipment Listing  
.250" -.635" Lewis #10-FHA, wire straightening & cut-off machine w/barfeed, 25' bar feed, air clutch, tooling in machine, #A2643 Camera icon  Visit Dealer's Equipment Listing  

WOODWORKING MACHINERY
JOINTERS, WOODWORKING
8" Delta Jointer #37-350 (DJ-20), cast iron fence, enclosed steel stand, 1-1/2 HP, new replacement cost $2436, #7418 Camera icon Visit Dealer's Equipment Listing  

WOODWORKING MACHINERY
PRESSES, WOODWORKING
Black Brothers #121, power lamination press, 8' x 4' , chain power driven, pedestal control, #9178 Camera icon Visit Dealer's Equipment Listing  

WOODWORKING MACHINERY
SANDERS, WOODWORKING
15" Sheng Shing #SDM-15, wide belt woodworking sander, Ser.#97042801, #A3219 Visit Dealer's Equipment Listing  

WOODWORKING MACHINERY
SAWS, WOODWORKING
American vertical wood saw, work lamp, parts machine only, #A2412 Camera icon Visit Dealer's Equipment Listing  
Powermatic #BW900, 36" , deep throat vertical wood & plastic cutting band saw, T-slotted worktable, work lamp, #A2513 Camera icon  Visit Dealer's Equipment Listing  

Surplus Record Surplus Record, Inc. All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise