Estes Machinery Co
3952 S Princeton Ave
Chicago, Illinois 60609-2802
Contact: Peter Estes
Tel: 312-543-6772
Email: Estesmachinery@aol.com
In the Surplus Record since 1955

BENDERS, BAR, PIPE & TUBE (Also See CNC Machinery & Equipment)
1-1/2" Pines #1, hydraulic mandrel ext., degree of bend, right hand, PB stand, 5 HP   

BENDERS, REBAR
1-5/8" Peddinghaus #42K, single/double bends, stirrups/multi-angular spirals   

BRAKES, BOX & PAN
14 ga. x 8' Dreis & Krump (Oliver) power box & pan brake, 2 HP direct motor dr, 8" fingers   

BRAKES, PRESS (TONS) (Also See CNC Machinery & Equipment - Brakes, Press)
225 Ton, Cincinnati #9, 12' OA, 10' 6" BH, power ram adj., prog.BG, A/C & brake, flush/floor   

BROACHING MACHINES (Continuous Chain & Horizontal)
HORIZONTAL BROACHING MACHINES
2 Ton x 30" str., American Type H, maximum capacity 4 ton, maximum overall broach length 33"    
10 Ton x 90" str., Colonial #HAS10-90, 15-30 FPM cut, 100 FPM return, tooling, exc.   
15 Ton x 66" str., LaPointe #HP-30, retriever, 0-28 FPM cut, 100 FPM return, tooling   
20 Ton x 72" str., LaPointe #HP-40, retriever, 0-20 FPM cut, 100 FPM return, (2) avail   
37-1/2 Ton x 72" str., LaPointe #HP-75, retriever, 0-20 FPM cut, 90 FPM return, excellent   
50 Ton x 78" str., LaPointe #HP-100, retriever, 0-15 FPM cut, 60 FPM return,. tooling, exc   

CHIP WRINGERS (Also see Extractors, Oil)
30" Broadbent, updated electrics, excellent condition, also have (2) 24" machines   

COIL HANDLING EQUIPMENT
COIL CRADLES & STRAIGHTENERS
4000 lb. CWP #6AC5, 7 rolls, 6" wide x .078" , 42" OD, Reeves V/S drive, excellent   

CUT OFF MACHINES (Also See Tube Machinery)
3" Modern #3B, 1/4" to 3-1/8" OD capacity(2-1/2" pipe), manual, 2 slides, stock stop   

DIE HANDLING EQUIPMENT
10000 lb. Moore, 38" x 24" bed, 9" SH, 24" open, with radial drill attached   

DRILLS, CIRCLE
No. 24 Babin Circl-Matic, 0" -27" bolt circle diameter range, 24" chuck, 33" swing, #5MT, 10 HP   

ENGRAVING MACHINES
Gorton #P1-2, 2-D, cutters up to 5/16" diameter in steel, 1:1 to 1:16 ratio   

EYELETTERS
Model F USMC, up to #5 grommets, bench model, electric foot switch   

FURNACES & OVENS
OVENS, CABINET TYPE
38" W x 26" H x 20" D Grieve #HX-650, electric, 650°F, motorized door lift, excellent   

GRINDERS, CENTERLESS, BELT
No. 484-W Production, 1/16" - 1-1/2" diameter capacity, 4" x 84" belt, integral coolant system   

GRINDERS, DRILL
Oliver #21, Heavy Duty, capacity 3/32" to 1/2" - 2 lip right hand, pedestal mounted, 1/4 HP   
Sellers #6G, 5/16" - 3" Capacity, Coolant, Twist & Flat Drills   
Sellers #10G, 1-3/4" - 5" capacity, coolant, straight or tapered shank drills, 5 HP   

GRINDERS, PROFILE
No. 2 Boyar-Schultz, dual spindle, 18" x 20" tilt table, collet type, 10k RPM, oscillate   

GRINDERS, SURFACE, ROTARY TABLE, HORIZONTAL SPINDLE
Arter #D16, 17" mag.chuck, tilt table., 16" wheel, 7-1/2 HP, clnt., excellent   

GRINDERS, TOOL & CUTTER (Also See Grinders Tool & Cutter, CNC)
Cincinnati Monoset, motor d workhead, hard chrome ways, lots of tooling, excellent, 1983   

HAMMERS, MECHANICAL, POWER
Pattinson (similar Little Giant), 100 lb., 7-1/2" thrt, 6" x 7" up.die, 8" x17" low.die, 2hp   

LATHES, ENGINE (Also See Lathes, Engine, Gap or Tracer & Copying)
20" x 115" Axelson, maximum swing 23-5/8" , 3-J, taper, steady, 721 RPM, 10 HP   

LATHES, SPINNING
20" Schulte Type DEA 35, 8 speeds 180 to 1600 RPM, tooling, excellent   
22" /44" Pryibil, extension bed, swing: 22" gap closed, 44" bed extended, tooling   
22" Pryibil, 4 speed Drive All transmission, brand new electrics   
26" Haag Spinmaster #MXF, 4 speed Drive All transmission   
26" Schulte #DEA35, variable speed, excellent, (2) available   
27" /60" Bedinger, extension bed, swing: 27" gap closed, 60" bed extended, tooling   
27" /60" Prybil, HD model for extremely heavy spinning, excellent   
25" Wilson, variable speed, 28" or 29-1/2" swing with risers, 5 HP   
32" Haag Spinmaster #MXF, US variable speed drive, 10 HP   
36" Taylor, heavy duty, 3 step cone drive, 10 HP   

MARKING MACHINES (Also See Wire Machinery, Marking Machines)
No. 175 Schmidt, hydraulic, 8" die space, 3/8" -7" adjustable stroke, 3 HP, tooling   
Borries #BM73H and Automator #MV-75, manually operated roll marking machines   

OIL GROOVERS
Holroyd, 6" oil grooving lathe, 9" diameter o/bed, 8" length., sgl./multi, strght./ring, ext/int grooving   
Wicaco, int. & ext. grooves, 7/32" maximum depth, 3/8" width, 0-7" stroke, 1 HP   

POLISHERS (Including Buffing Jacks)
Divine, double spindle, constant speed, 1-1/4" spindles, (2) 5 HP motors   
Hammond #5-VRO-D, vari-speed, 5 HP motor, 1-1/4" diameter spindles, excellent   
Hammond #5-VRRO, double spindle, vari-speed, (2) 5 HP, 1-1/4" diameter spindles   

PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK
5 Ton, Rousselle #OE, 1-1/4" stroke, 9" SH, 200 SPM, floor model, excellent   

PRESSES, SCREW (Also See Chemical,Petroleum,Gas Etc. & Forging Equip. Catagories)
20 Ton, Hopkins #2, 7-5/8" stroke of screw, 20-1/2" width of opening in frame   
60 Ton, Hopkins #3, 11-5/8" stroke of screw, 31" width of opening in frame   

RIVET SPINNERS
Grant #220, 7/16" diameter, 6" x 8-1/4" table, 2 HP, equipped with automatic trip   
Orbitform #500A, 1/2" diameter, orbital & roller forming heads, like new, 2002   

RIVETERS
Chicago #214, 1/8" , dual head, adj.centers up to 14-3/4" , 14" throat, excellent   
Chicago #450, 1/16" , elec.foot switch, safety equipment, like new   
Chicago #490, 1/4" , 12" thrt, maximum rivet length.1-1/2" , elec.foot sw, safety equip, exc.   
Chicago #82, 1/4" and 3/16" , dual head, adjustable centers, 12" throat, excellent   
Chicago #912, 1/8" , electric foot switch, safety equipment, like new   
Chicago #99BT, 3/16" diameter for long rivets, continuous blade feed, excellent   
Milford #64, capacity 1/8" , 6-1/4" thr., bench model, electric foot switch, excellent   

ROLLERS, THREAD
1-1/4" Landis #10TRM, air-operated vise & auto.air-operated carriage traverse, rebuilt   
1-15/16" Grob #RMOd, thru-feed & in-feed, 2-die, 6 ton, many spare parts   

ROLLS, ANGLE BENDING
2" x 2" x 1/4" Birlik #PBH45, hydraulic adj. top roll, horiz/vertical, console w/DRO, 1999   
2" x 2" x 1/4" Buffalo #1/2, angle bending roll, horizontal, excellent   
2-1/2" x 2-1/2" x 5/16" Steco #SBM/2A, vertical, leg-in attachment, 5 HP, 1966   
3" x 3" x 3/8" Edwards #1B, vertical, min.dia.leg-out 24" , leg-in attachment, 10 HP   
3" x 3" x 3/8" Steco #SBM/3, vertical, leg-in attachment, 7-1/2 HP, excellent   
4" x 4" x 3/4" Steco #SBM/4-HYD, vertical, hydraulic roll adjustment, excellent, new 1975   
5" x 5" x 3/4" Herkules #BO232K, horiz, power.adj.to center roll, 2-speeds, tooling, 1977   

ROLLS, PLATE BENDING, 4-ROLL
14' x 1/4" Steco #HIP/4, initial pinch, hydraulic adj/drop end, new 1973, excellent   

ROLLS, PLATE BENDING, INITIAL & DOUBLE PINCH TYPE
5' x 1/4" Steco #IP3, 6-1/2" roll diameter, power rear roll adj., manual drop end   
8.3' x 10 ga. Buxton #IP100/4, 6-1/2" diameter roll, 14" min. diameter tube maximum thick/length, ' 80   

ROLLS, PLATE BENDING, PYRAMID TYPE
8' x 1/2" Heisteel, type FIX-D, 10" diameter rolls, 1979   

SAWS, BAND, HORIZONTAL (Also See Vertical Band Saws)
10" x 12" Peerless #HB1012A, hydraulic auto.horizontal, 1-1/4" blade, coolant, exc., 1985   

SHEARS, POWER SQUARING AND PLATE (GAUGES)
10 ga. x 4' Amada #M1232, FOPBG, square arm & supports, foot switch, new 1977   
10 ga. x 8' Amada #M2532, FOPBG, DRO, sq.arm & supports, foot switch, 1986   
10 ga. x 14' Cincinnati #1414, power shear, 24" rear operated BG, sq.arm, 3 supports   

SHEARS, POWER SQUARING AND PLATE (INCHES)
1/4" x 8' Cincinnati #1808M, FOPBG, square arm & supports, excellent   
1/4" x 10' Cincinnati #1810, FOPBG, sq. arm and supports, mag. supports for 16 ga.   
3/8" x 10' Cincinnati #2510, FOPBG, sq.arm, supports, flush to floor, exc., 1976   

SHEARS, RING & CIRCLE
Niagara #33 R&C, 1/4" capacity, 8-1/2" -60" circle diameter, power downfeed, 10 HP, excellent   
Reliance " By George" #CH5273, 1/4" capacity mild steel, up to 52" circle diameter   
Reliance " By George" #CH7275, 1/4" capacity mild steel, up to 72" circle diameter   

SHEARS, ROTARY
Quickwork #25A, 1/4" capacity, flanging & circle cutting attachments   

SHEARS, SLITTING
Buffalo #23, capacities: plates 3/8" , rounds 5/8" , flats 2" x 1/2" , angles 2-1/2" x 1/4" , 2 hp   

SHEET METAL & HVAC MACHINERY (Also See Brakes)
GROOVERS, POWER
Edwards, 16 ga., power grooving, 40" throat, stove pipe, tinware, inside & outside seams   
Pexto #520-C, 18-20 ga. capacity, all seams: inside, outside, Pittsburgh & Acme locks   

SHEET METAL & HVAC MACHINERY (Also See Brakes)
WHEELING MACHINES
42" Edwards, 42" Coborn English wheeling machines, tooling   

STRETCHING/SHRINKING MACHINES
Eckold Piccolo #KF320, 2mm steel forming capacity, 2.5mm lt.alloy, 1.5mm Stainless Steel, tooling, ' 90   

SWAGING MACHINES
1-3/4" Standard #3A, 2 die, 3/8" solids, 2-1/2" die length, 5 HP   
2" Torrington #4, 2 die, 5/8" solids, 3" die length, excellent   
3-3/8" Fenn #5F, 4-die, 1-1/2" solid capacity, 5" die length   

TAPPERS, For Internal Threading (Also See Drilling & Tapping Machines)
Cleveland #E2/#E1/#E0, Tappers, 3/8" to 1" capacity, 12-1/2" throat, 3 HP (3 available)   
Haskins #2CAM, capacityin mild steel No. 8 to 5/8" , 2" maximum str., 6-1/2" thr., 1/3 HP   

THREADERS, BOLT
1/4" -1" Landis, 4-spindle semi-automatic, 3-1/2" max thread length, tooling   
1-1/2" Landis, double spindle, 12R Lanco die heads, excellent   
2-1/2" Landis-Maiden #LM, 20R Lanco die head, tooling, excellent, 1978   

THREADERS, PIPE (Includes Nipple Machines,Pipe & Tube Cutters)
4" Toledo #1-2-4, Capacity 1/2" -4" pipe, 3/8" -2" bolts, 1/2" -4" conduit, 3 HP, 6-spds, clnt.   

TRIMMERS, STAMPING (Also See Presses, Trimming)
No. 43-HVX Beatty Quickwork, 3/16" capacity, heavy duty spindles, air hold down   
No. 48-L Beatty Quickwork, 18 ga. capacity city, vari-speed, pneumatic hold down   

TUBE END FINISHING & FORMING MACHINES
8" Conrac #M369, hydraulic tube end flanger, type schedules: 5, 10, 40, 80, 4.5-8" IPS   

TUBE MACHINERY
END FORMERS, TUBE
3/4" Torrington Vaill #260, double flare, bead, flange, reduce/expand, coin   
8" Conrac #M369, hydraulic flanger, type schedules: 5, 10, 40, 80, 4.5-8" IPS   

TUBE MACHINERY
FLARERS, TUBE
3/4" PHI-Conrac #DF-HD, double lap flarer, 1/8" -3/4" single, 1/8" -1/2" double, tooling, 2003   

TUBE MACHINERY
TRIMMING & THREADING, TUBE
V & O #987, trims, threads & beads tubes up to 5" diameter, 15" maximum length, 5 HP   

TUMBLING BARRELS
Almco #DB50, 5.6 cu.ft. barrel cap, 22" diameter, 24" length, Neoprene lined, V/S drive   

WELDING MANIPULATORS, POSITIONERS & TURNING ROLLS
WELDING POSITIONERS
10000 lb. Bode #100/VP, variable speed, 60" round T-slotted table, pendant control, excellent   

WIRE MACHINERY
FORMERS, WIRE
Baird #2, 4 slide wire forming, 1/8" diameter wire, 1" ribbon, 2 plane straightener, V/S drive   
Nilson #S3-26, 4-slide, 3/16" diameter wire, 1-5/8" ribbon, split cams, 26" length.of feed, v/s drive   

WIRE MACHINERY
MEASURING, CUTTING & STRIPPING MACHINES, WIRE
No. CS6 Artos, cap:10 ga.stranded, 12 ga.solid, cut.lgth 1" to 194" , w/Artos dereeler   

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise