Browse:  Machinery Electrical
RSS Blog Surplus Record

GRINDERS, CYLINDRICAL, PLAIN (Also See Grinders, Roll)

There are 97 listings in this category
File update: Wed, Dec 13, 2017 00:32:18
Advanced Search
Return to original sort
Sort by Manufacturer
BROWN & SHARPE
10" x 20" Brown & Sharpe #1A, universal grinder, motorized workhead, tailstock, swing down internal grinding attachment, #A1563    Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
10" x 48" Brown & Sharpe #1048 Microstatic, cylindrical grinder, #3825   rfq
DiPaolo Machine Tools, Mississauga, ON 905-676-9265 (Email: nmartins@dipaolocnc.com) Nelson Martins
CAPCO
40" x 157" Capco Supergrinder #RGL.3816.M.05, table mounted grinding wheel dresser, hyd auto infeed, 0-900 RPM, 20 HP, 2005, #28092        Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
CHURCHILL
38" x 36" Churchill #3836, DRO, motorized work head, tailstock, 20 HP, #5229        Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
CINCINNATI
6" x 18" Cincinnati #6R, OD, 24" whl, full auto cycle, BTW auto wheel dress, '64, #153251      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 16" Cincinnati Milacron #R-58, 16" wheel, hydraulic table, pickfeed, rapid, 1973, #153127        Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 18" Cincinnati Milacron #10RX18, plain cylindrical grinder, 6" diameter wheel, 66 to 268 RPM, 7.5 HP, #28250      Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
10" x 31" Cincinnati Milacron #R-78, hydraulic table, pickfeed, plunge, rapid, 1975, #153128      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 36" Cincinnati, plain cylindrical grinder, 1960    Visit Dealer's Equipment Listings  rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
10" x 48" Cincinnati #10Rx48, plain cylindrical grinder, #11117      Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
10" x 48" Cincinnati Milacron Series 360, 24" diameter whl, motor d.workhd, 1969, #7344P      Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
10" x 72" Cincinnati, plain cylindrical grinder, 1952    Visit Dealer's Equipment Listings  rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
10" x 120" Cincinnati, cylindrical plain, 1954    Visit Dealer's Equipment Listings  rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
14" x 72" Cincinnati Series #OM, hyd longituindal table feed, auto grinding wheel balancing, #13 B&S tapers, 830 RPM, #27795      Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
14" x 96" Cincinnati #OE, grinder, s/n #6P4F1Y1114L  Visit Dealer's Equipment Listings  rfq
Abbott Machine Co, Alton, IL 800-262-6478 (Email: mike@abbottmachineco.com) Mike St.Peters
14" x 120" Cincinnati, 30" wheel, work rests, 1968   rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
14" x 144" Cincinnati, cylindrical grinder, 30" x 3" x20" wheel, swivel table, coolant, #65346      Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 192" Cincinnati, plain cylindrical grinder, 17" swing o/table, swivel table, 30" wheel rfq
MBI Worldwide LLC, Vernon Rockville, CT 860-202-8550 (Email: edfreligh@comcast.net) Edward Freligh
Cincinnati Heald #5650, planetary grinder, ID & OD, 14.5" hole diameter, 32" hole length, #28085     rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
COMETA
20" x 132" Cometa, 24" wheel, 8-back rests, pick and plunge, 3/60/460V.    Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn
COVEL
5" x 12" Covel #512H, hydraulic table, 10" wheel, 5C collets workhead, #148206      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 12" Covel #512H, OD grinder, ID attach, power table, #2MT, 1.5 HP, s/n #512H-108, 1969, #151763      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
CRYSTAL LAKE
6" x 10" Crystal Lake #608, OD grinder, hand feeds, 3C collet workhead, 2 HP, serial #6082615, #154791        Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
GENERAL
General #E226, truing & dressing machine, air operated dressing cycle with digital counter, 2003, #17015     rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
JONES & SHIPMAN
6" x 12" Jones & Shipman #1070, hydraulic, auto cycle, 10" x 1" wheel, 3 HP, coolant, #18265      Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
LANDIS
4" x 12" Landis #4H, plain cylindrical grinder, 3" diameter wheel, Nice, 1957   rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
6" x 18" Landis #1R, plain OD grinder      Visit Dealer's Equipment Listings  rfq
RBI Equipment Sales & Surplus, Woodruff, SC 864-327-8319 (Email: kyle.renfrow@essindustrial.com) Kyle Renfrow
6" x 18" Landis #1R, True Form dresser, 5-1/4" wide wheel guard, 1974, #2912      Visit Dealer's Equipment Listings  rfq
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.
6" x 18" Landis #1R, good run condition, 1956 to 1976 (4 available)   rfq
Seminole Machinery Company, Romeo, MI 586-465-9700 (Email: danny@seminolemachinery.com) Dan Patrona
6" x 18" Landis #1R, plain, hydraulic table, plunge, auto truing, excellent, 1981 (4 available)   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
10" x 72" Landis #CH Plain, 3" W grinding wheel, auto lube & infeed, tary, #66441      Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
10" /14" x 120" Landis #CH, dead/live headstock, hydraulic table, 30" grinding whl, '59 rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
14" x 24" Landis #3R, True Form dresser, plunge feed, light use, 1978, #6949     rfq
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.
14" x 36" Landis #3R, 28" diameter, 2-1/2" wide wheel, 480 V., serial #797-63, #BX6657      Visit Dealer's Equipment Listings  rfq
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand
14" x 36" Landis #LCH, cylindrical plain grinder, 30" x 3" x12" grind.wheel, 10 HP, #66645      Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
14" x 96" Landis #4R, auto feed, 30" under wheel, runs excellent, 1968   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
18" x 72" Landis #4R Plain, 30" grinding wheel, behind the wheel dresser, plunge   rfq
Seminole Machinery Company, Romeo, MI 586-465-9700 (Email: danny@seminolemachinery.com) Dan Patrona
18" x 72" Landis #LCHH, 20 HP, 30" wheel, dresser, coolant, air, 1955      Visit Dealer's Equipment Listings  rfq
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth
18" x 120" Landis cylindrical plain grinder, 1976, #17178     rfq
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
24" x 72" Landis #24-72, 25-100 RPM, #16 Jarno, tailstock, clnt sys, s/n #526-6, #7536      Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
24" x 72" Landis #LCHH, 30" x 4" wheel, Micro infeed attach, auto infeed/retract, excellent      Visit Dealer's Equipment Listings  rfq
Industrial Surplus Sales Inc, Berlin, CT 860-828-3541 (Email: sales@industrialsurplus.com) Paul Gaffney
24" x 16' Landis, plain cyclindrical grinder, 1956   rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
24" x 312" Landis, 12-100 RPM workhead, 5 HP workhead, 30 HP wheelhead  Visit Dealer's Equipment Listings  rfq
Abbott Machine Co, Alton, IL 800-262-6478 (Email: mike@abbottmachineco.com) Mike St.Peters
44" x 320" Landis, heavy duty, 36" T-slot faceplate on workhd., new 54" diameter x3" x 12" whl, '53    Visit Dealer's Equipment Listings  rfq
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt
44" x 320" Landis, heavy duty, 36" T-slot faceplate on workhd., new 54" diameter x3" x 12" whl, '53    Visit Dealer's Equipment Listings  rfq
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt
MITSUBISHI
17" x 80" Mitsubishi #PB45B-200, Fanuc 18T, 30" x 4" wheel, gauging, balance, 1999, #27362      Visit Dealer's Equipment Listings  rfq
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin
MYFORD
5" x 12" Myford #MG12, 12" x 1" x5" wheel, 1830 RPM, 3" diameter grinding, hydraulic, coolant    Visit Dealer's Equipment Listings  rfq
Sabito Machinery Inc, Concord, ON 905-738-8730 (Email: David@sabito.com) David Slimowitz
5" x 12" Myford #MG12, 12" x 1-1/2" x 5" grinding whl., 12 workhead speeds, s/n #S78166     rfq
Holt Equipment, Annandale, MN 952-938-2202 (Email: genesis@skypoint.com) Wayne Mader
5" x 12" Myford #MG12, cylindrical grinder, motorized workhead with center, tailstock with center, #9767    Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
5" x 12" Myford #MG12, plain cylindrical grinder, hand feeds, 12" wheel, 4C Collets, 1975, #151859      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 12" Myford #MG12-HA, hydraulic, incremental downfeed, dwell, retract, #42110      Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
5" x 12" Myford #MG12-HM, hydraulic, auto infeed, 12" x 1-1/2" wheel, 3 HP, 1993, #18357      Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
5" x 12" Myford #MG12-HM, cylindrical grinder, hyd table traverse w/dwell, plunge grinding, 10 deg swiveling table, #27934      Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
5" x 12" Myford #MG12-HM, ID/OD, swing down internal, well tooled, 2000      Visit Dealer's Equipment Listings  rfq
Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn
5" x 12" Myford #MG12-HP, plain cylindrical grinder with plunge & internal        Visit Dealer's Equipment Listings  rfq
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton
5" x 12" Myford #MG12-HP, hydraulic, plunge infeed, 10x1" wheel, clnt, tooling, 3hp, '70, #18268      Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
5" x 12" Myford #MG12-HPM, hydraulic table, high-precision, OD grinder, auto infeed, '88, #154114        Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 12" Myford #MG12-HPT, auto plunge & traverse, dwell, sparkout, coolant (2 available)      Visit Dealer's Equipment Listings  rfq
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
5" x 12" Myford #MG12-M, manual feeds, coolant, collet, new paint    Visit Dealer's Equipment Listings  rfq
Performance Machine Tools, Fremont, CA 510-249-1000 (Email: sales@permach.com) Robert Kroha
5" x 12" Myford #MG12-M, 12" whl, 3C collet workheed, hand fd, s/n #SM158721, 1986, #156764        Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
5" x 12" Myford #MG12-M, motorized work head, tailstock, coolant, 3 HP, #6801      Visit Dealer's Equipment Listings  rfq
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5" x 12" Myford, high-precision grinder   rfq
TNT Industrial, Long Beach, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen
NAGOAKA
7" x 7" Nagoaka #AM150, cylindrical grinder, motorized workhd, pneumatic table feed, inf var table & workhead speeds, #27935      Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
NORTON
6" x 30" Norton #CTU, 24" diameter wheel, 6" grinding wheel, headstock, infinite speed, rebuilt .2002   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
10" x 30" Norton #LC5, 24" wheel, auto feed, dresser, under power, good condition, 1966   rfq
Northern Tool Co, Indianapolis, IN 317-638-2223 (Email: Sleenortherntool@aol.com) Steve Lee
10" x 36" Norton #CTU, O.D., plunge, dresser, from gov' t storage, excellent rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
10" x 48" Norton #CTU, 30" diameter grinding wheel, plunge   rfq
Seminole Machinery Company, Romeo, MI 586-465-9700 (Email: danny@seminolemachinery.com) Dan Patrona
10" x 48" Norton #CTU, cylindrical grinder, MC Intellegent drive, 15 HP, 1991      Visit Dealer's Equipment Listings  rfq
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
10" x 72" Norton #C5, plunge, 30" wheel, full hydraulics, 15 HP, inspect under power (2 available)   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
10" x 102" Norton grinder, $3500 OBO   rfq
Donaldson & Landry Machine, Portland, OR 503-799-0184 (Email: zalpys@aol.com) Algird Zalpys
14" x 36" Norton #LCTU, above wheel truing, plunge, 30" x 9" wheel, very nice, 1964 (2 available)   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
14" x 120" Norton #C, hyd longitudinal table feed, semi-auto pick type infeed attach, 3 HP workhead, tailstock, coolant sys, #27794      Visit Dealer's Equipment Listings  rfq
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
14" x 120" Norton #LC-5, cylindrical grinder, 30" x 3" grinding wheel, 1977, #68773      Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
14" x 192" Norton, plain cycindrical grinder, well tooled   rfq
Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales
18" x 72" Norton #LC-2, heavy-duty, 20 HP, under power, 1957, #153691      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
30" x 96" Norton cylindrical grinder, plain, #68545    Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
40" /48" x 16' Norton, gap, IPUP, 36" x 4" wheel, excellent, rebuilt 2003 rfq
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff
40" x 200" Norton, 30" x 4" x 12" Wheel, under power, 1941, rebuilt 2003   rfq
Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Email: greg@poliquinmachinery.com) Greg Poliquin
120" x 192" Norton, plain OD cylindrical grinder, 1987      Visit Dealer's Equipment Listings  rfq
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
Norton #6X18CTU, cylindrical grinder, chip pan, hydraulic unit, 25" bed, s/n #25746 5      Visit Dealer's Equipment Listings  rfq
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn
Norton #MT-896, OD / ID grinder    Visit Dealer's Equipment Listings  rfq
International Machine, Inc., Orion Township, MI 248-845-2140 (Email: leads@internationalmachine.net) Tim Mack
PARKER
10" x 24" Parker Majestic #B, power table, 3-jaw chuck, 1 HP, nice   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
SHARP
6" x 18" Sharp #OD618A, OD grinder, PLC auto infeed control w/plunge, power table, s/n #29755, 2000, #155913      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
SHIGIYA
10" x 24" Shigiya #GPA-27-60, plunge, 16" x 2" wheel, 5 HP, 1973, #17976      Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
10.6" x 39.4" Shigiya #GPA-27-1000, OD, precision plain cylinder, tailstock, 1983, #152949      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
10" x 39" Shigiya Seiki #GUA-27-100, cylindrical ID/OD grinder      Visit Dealer's Equipment Listings  rfq
RBI Equipment Sales & Surplus, Woodruff, SC 864-327-8319 (Email: kyle.renfrow@essindustrial.com) Kyle Renfrow
12" x 18" Shigiya #GU-30-60H, cylindrical grinder, #52300      Visit Dealer's Equipment Listings  rfq
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
16" x 24" Shigiya #GPA-40-60, auto plunge, sparkout, 16" wheel, original paint, exc., '88      Visit Dealer's Equipment Listings  rfq
Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Email: rmsused@aol.com) Kimball R Roberts
16" x 24" Shigiya (Japanese) #GPA-40-60, high-precision, full auto cycle, 1987, #153375      Visit Dealer's Equipment Listings  rfq
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt
17" x 118.1" Shigiya #GP45.300, auto infeed, Marposs gauging, 4 steadys, excellent     rfq
The Tooling Emporium, Louisville, KY 502-802-4008 (Email: sales@toolingemporium.com) Mark Coxon
SMTW
19" x 78" SMTW Shanghai #M1450Ax2000, ID/OD grinder, internal grinding att., #A2176      Visit Dealer's Equipment Listings  rfq
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
SUPERTEC
8" x 18" Supertec #G20-45CII, 14" x 1" x 5" wheel, 2MT, 1" quill, motorized table feed, Sony DRO, 2009, #60456      Visit Dealer's Equipment Listings  rfq
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
SUPFINA
18" x 50" Supfina #SM-95-50, 2 ea oscillating heads, produces mirror finish, like new   rfq
Stanley Machinery Corp, Agawam, MA 413-786-1300 (Email: machinery2000@aol.com) Stan Cohen
TOS
11" x 24" Tos, hydraulic, auto infeed, plunge, 15-3/4" wheel, 5.5 HP, s/n #588814, 1988   PDF  Visit Dealer's Equipment Listings  rfq
Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: mail@machinerysolutions.com) Carl Amick
TOYODA
12.59" x 20" Toyoda #GOP32x50, cylindrical grinder, #10120      Visit Dealer's Equipment Listings  rfq
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
WARNER & SWASEY
6" x 18" W & S #C-5, plain, auto Duplitru truing, 24" x 3" grind.wheel, plunge, 1982   rfq
GCH Machinery Division, Warren, MI 586-771-1500 (Email: info@gchmachinery.com) Sales Dept.
30" x 96" W & S #LTCU, CNC w/AB 9240 control, ball screw movement, Barnes coolant sys   rfq
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise