Browse:  Machinery Electrical
RSS Blog Surplus Record

DRILLS, RADIAL

There are 220 listings in this category
File update: Sat, Oct 21, 2017 00:32:19
Advanced Search
Return to original sort
Sorted By Equipment Location
   ALABAMA  
3'-7" Cincinnati, radial drill, #3MT, 1 HP, 1" Cast Iron, 3/4" tapping  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
4'-13" Supermax Kao Min #KMR-1250, radial drill, #5MT spindle, 24" x 6" box table  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
4'-15" Cincinnati Bickford Super Service radial drill, 20 HP, box table, 1953  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
5'-15" Cincinnati Bickford, radial drill, #6 MT, rapid traverse, power clamping, #6696  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
6'-19" Giddings & Lewis Chipmaster, radial drill, #5MT, 30 HP, 1973  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
   CALIFORNIA  
2.5'-8" Ramco #RM-700, box table, power elevation, 88-1500 RPM, #4 MT, 2 HP, #6095  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
3'-7" Veet #3H, precision radial drill, #3MT, 14" swivel vise on table, Jacobs 18N drill chuck  Camera icon RFQ
Scott Machinery, McClellan, CA 916-638-7718 (Email: Sales@scottmachinery.com) Deanna Payne
3'-8" Acra #FRD900, coolant system, box table, tool box, #4MT, 88-1500 RPM, 2 HP, new, #SMFRD900  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
3'-9" Baileigh #RD-1000M, 1.57" drilling capacity, heavy duty, power down feed, #4MT, 4 HP, new, #SMRD1000M  Camera icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
3'-9" Cincinnati Bickford, radial drill, 25" spindle travel, 11" str., #1557  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner
3'-11" Acra #FRD1100, radial arm drill, box table, tool box, coolant system, #4MT, 44-1500 RPM, 3 HP, new, #SMFRD1100  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
3'-11" Carlton #1A, #4MT, 60-1500 RPM, box table, power elevation & clamp, #4579 (2 available)  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4'-6" Johansson #60, 40" x 20" table, power elevation, 60-900 RPM, #4 MT, 3 HP, #5341  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4'-9" Giddings & Lewis Bickford Chipmaster, box table, power arm elevation, coolant system, used, #A4014  Camera icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
4'-11" Acra #FD1280, radial drill arm, box table, tool box, coolant system, #4MT, 44-1500 RPM, 3 HP, new, #SMFRD1280  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
4'-11" Fosdick Super Service, 18-1800 RPM, #6MT, 16" spld travel, 60" under spindle, thread fds  RFQ
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
4'-11" Kent #TPR-1230H, 44-1500 RPM, 2 HP, 2014  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
4'-13" Acra #ARD1250, radial arm drill, 19" x 24" box table, #5MT, 25-2000 RPM, coolant system, 5.4 HP, new, #SMARD1250  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
5'-13" Carlton #3A, power clamp-elev.-trav., tilt box table, 15-1500 RPM, 15 HP, #5739  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5'-15" Kao Ming #KMR-1600DH, Power Clamping/Elevation, 7.5 HP, 30-1580 RPM, #5 MT  Camera icon Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler
5'-17" Acra #ARD2000, radial arm drill, 24" x 31" box table, tool box, #5MT, coolant system, 7.4 HP, new, #SMARD2000  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
5'-18" Ikeda #RMB-1875, #5MT, T-Slotted box table, power elev. & clamping, coolant sys, 1991  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman
6'-15" Fosdick, 20-1406 RPM, #6MT, 22" spindle travel, 70" under spindle, thread feeds, 10 HP  Spec Sheet RFQ
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch
6'-19" Cincinnati #6E, power elevation-clamp-trav., 23-1415 RPM, #6 MT, 15 HP, #5104  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
6.5'-19" Ooya #RE3-2000, power elev.-clamp., box table, 20-2180 RPM, 10 HP, #6818  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
7'-21" Okuma #DRA-J2000, 7.5 HP, power elevation & clamp, 1970  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 310-826-4440 (Email: sales@machinerynetwork.com) Sales Dept.
8'-26" Carlton #5A, power elev.-clamp-trav., 10-1000 RPM, #6 MT, box table, 20 HP, #4747  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
   GEORGIA  
8'-24" Asquith radial drill  RFQ
Bibb Machinery Sales, Macon, GA 478-788-1975 (Email: rtruett@ymail.com) Robert/ John
   ILLINOIS  
3'-7.5" Cincinnati, 1.5 HP, power elevating, #3 MT, 1555 RPM, very good condition  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers
3'-9" Ikeda #RMS9, radial drill, #17185  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
4'-9" Carlton #1A, box table, guards, power elevation, #4MT, 5 HP  RFQ
AA Machinery Sales, Peoria, IL 309-691-5550 (Email: Aljanich@sbcglobal.net) Todd Simpson
4'-9" Cincinnati Gilbert, #4MT, 4 HP, 50-1800 RPM, box table  Camera icon RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
4'-11" Carlton #1A, box table, guards, power elevation, #4MT, 5 HP  RFQ
AA Machinery Sales, Peoria, IL 309-691-5550 (Email: Aljanich@sbcglobal.net) Todd Simpson
4'-11" Cincinnati Bickford SuperService, #5MT, box table, 1500 RPM, 7.5 HP, 1957, #18360  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
4'-13" G & L Chipmaster, #5MT, box table, power elevation, clamp, 15 HP, 1960, #18094  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
4'-13" Vanguard #Z3050x16/1, #5 taper, 5-1/2 HP, 1.96" maximum drilling diameter, 2008, #41188  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn
4'-15" American Hole Wizard, 18" Z, 20-1600 Rpm, 20 Hp, No. 5 Morse Taper S36680  Camera icon Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
4' X 14" Giddings & Lewis Kaukauna 125-U S37194  Visit Dealer's Equipment Listings  RFQ Auction item
Perfection Industrial Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionindustrial.com) Dept. Sales
5'-13" Carlton #3A, #5 MT, 15 HP, 15-1500 RPM, box table, power elevation/clamp/traverse  RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
5'-13" Cincinnati Bickford, #5 MT, power elevation, 1800 RPM, 15 HP, 1954, #17721  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
5'-13" Ikeda #RM1500, box table, power clamping, 1976  Camera icon Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
5'-15" Carlton #3A, power clamping, power elevation  Camera icon Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
5'-17" Clausing #CL1600H, heavy duty, #5MT, hydraulic clamping unit, box table, 7-1/2 HP, 2009, #18230  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
6'-17" Cincinnati Super Service, 14-1700 RPM, 20 HP, 18" stroke, #6 MT taper, S36681  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
6'-19" Carlton #4A, #6MT, power elev., 3000 RPM, box table, coolant, 50 HP, 1982, #18232  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
8'-19" Ooya #RE3-2500, #5 MT, 2180 RPM, box table, coolant, 15 HP, 1976, #17903  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher
8'-19" Ooya #RE3-2500, 3" drill cap, box table, tapping, reconditioned 2010, S33545  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.
   INDIANA  
3' Italian #R915l, power elevation, manual clamping, 1975, tag #14717  Camera icon RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
4'-11" Kitchen & Wade, 75-1500 RPM, power clamping, box table, Tag #12981  RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
4'-12" Johansson, power clamping & elevation, box table, 7-1/2 HP, xclnt, tag #13922  Camera icon RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
4' Ikeda #RM1300, power clamping & elevation, 1977, tag #14716  Camera icon RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
6'-17" Giddings & Lewis Chipmaster #955, traveling arm radial drill, #6 MT, 25 HP  Camera icon Visit Dealer's Equipment Listings  RFQ
Bullseye Industrial Sales LLC, Middlebury, IN 574-825-4990 (Email: jeremy@bullseyeindustrialsales.com) Jeremy Wingard
7'-19" Archdale, 1500 RPM, 72" box table, Tag #13944  Camera icon RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman
   IOWA  
4'-11" Carlton, radial arm drill  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: jamie@greenwayassoc.com) Clark Groeneweg
4'-11" Morris, 56-1500 RPM, #5MT, 5 HP, 12-1/4" quill travel, #77219  Camera icon Spec Sheet RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
4'-12" Ooya #RE1225H, 2" capacity, #5MT, 32-1650 RPM, s/n #OA6-1405, #81474  Camera icon Spec Sheet RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
4'-12" Sharp #RD-1230, power clamp & elevation, box table, coolant system, #13141  Visit Dealer's Equipment Listings  RFQ
N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan
7'-17" Carlton, adj.motor, 2-speed, #6MT, 15 HP, 10-1250 RPM, #79568  Camera icon Spec Sheet RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: SMC@smithmachinery.com) Jim Smith
   KENTUCKY  
5'-13" American Hole Wizard, radial drill, L type base, power elevation, #5MT, 1942  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
ASI Machine Tool, Richwood, KY 859-485-8370 (Email: jim@asimachinetool.com) Jim Sesher
   MASSACHUSETTS  
5'-11" Cincinnati Bickford Super Service, universal box table, 5 HP, like new, 1960  Camera icon RFQ
Stanley Machinery Corp, Agawam, MA 413-786-1300 (Email: machinery2000@aol.com) Stan Cohen
5'-15" Carlton #3A, 15 HP, #5MT, rapids, power arm & column clamping, 1970, #1429  Camera icon RFQ
Wigglesworth Machinery Co, Marblehead, MA 617-567-7210 (Email: sales@wigglesworthmachinery.com) Gifford
   MICHIGAN  
2.5'-8" KBC #RD-750S, 88-1500 RPM, #4MT, power elevation, coolant, 2 HP, '85, #10104  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
2.5'-11" Kao Ming #KRM1100S, #4MT, box table, 3 HP, power elev., manual clamp, '85, #9621  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
3'-9" Cincinnati Bickford, #22492  Camera icon RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.
3'-8" Arboga #ER1830, radial arm drill, 24" x 20" adj.table, 24" x 24" base, 8" column, hand crank, 1995, #5496  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton
4'-9" Carlton #0A, 30" x 53" base, #4MT, power elevation, 1979, #4052  Camera icon RFQ
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
4'-9" Carlton #0A, radial drill, 100-2000 RPM, #4MT, power elevation, 1979, #9333  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
4'-9" Carlton #0A, 100-2000 RPM, #4MT, power elevation, tapping, 5 HP, 1985, #10054  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
4'-9" G & L Chipmaster, radial drill, 63-2500 RPM, #4MT, 5 HP, box table, tap, #9620  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
4'-9" Giddings & Lewis Chipmaster, radial arm drill, #4MT, 5 HP, power elevation, #16545  Camera icon RFQ
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
4'-11" Giddings & Lewis Chipmaster, radial drill, 1966, #9606  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
4'-13" Carlton #3A, radial drill, #10305  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
4'-13" Femco #WRD50/1250, 40-1920 RPM, #5MT, power elev.table, 5 HP, 1979, #9933  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
4'-13" G & L, power elevation, clamping, rapid traverse, 1964, #22498  Camera icon Spec Sheet RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.
4.3'-13" Ikeda #RM1300, T-Slotted base, power elevation, #5MT, 5 HP, s/n #6576, 1966  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius
5'-11" Carlton #1A, radial drill, #11386  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
5'-15" Carlton #3A, 15-1500 RPM, #5MT, 30 HP, power elevation/clamping, 1981, #9614  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
5'-15" Carlton #3A, radial drill, #12250  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
5.3'-12" SMTCL #Z3050X16/1, 25-2000 RPM, #5 tpr, 5.5 HP, box table, power elev., '05, #9088  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
6'-6" Ooya #RE3-2000, 2180 RPM, under power, nice  RFQ
Solomon Machinery, Eastpointe, MI 586-774-2030 (Email: russ@solomonmachinery.com) Russ Solomon
6'-16" Femco #WRD75/1600, 40" x 50" box table, #5MT, 20-2180 RPM, 7.5 HP, 1979, #9805  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko
8'-19" American, power clamping, elevation, rapid traverse, 1960, #15344  Camera icon Spec Sheet RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.
8'-19" Carlton, radial drill, lever shift, #12145J  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8'-19" Carlton, radial drill, lever shift, #12143J  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
8'-19" Carlton, radial drill, lever shift, #12144J  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
10'-26" Carlton #5A, radial drill, #12148  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
12'-26" Carlton #5A, radial drill, #9871J  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
Donau #DR-23, radial arm drill, #11559  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel
Invema #FR40-1500, radial drilling, 62-2400 RPM, power elevation of arm, s/n #1100C10  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius
Kao Ming #KMR-11100S, radial arm drill, 11" column, #4MT, 3 HP, power elev, 1985, #16546  Camera icon RFQ
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward
   MINNESOTA  
4'-11-13/16" Sharp #RD-1230, radial arm drill, 11" x 48", excellent condition  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton
7'-15" G & L Bickford Chipmaster #954, box table, coolant, worklight, nice drill & HD  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, Hopkins, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln
   NEW JERSEY  
2.5'-8" Jet #JRD-750, 1-3/8" capacitysteel/2" capacityCast Iron, power elevation, #4 MT, 2 HP, '99  Camera icon Spec Sheet RFQ
American Machinery Liquidators, East Brunswick, NJ 732-390-0006 (Email: sales@americanmachinery.com) Marc Gallanter
2.5'-8" Jet #JRD-750, radial drill, 88-1500 RPM, coolant system, power feed, 2 HP, s/n #3067169, 1989, #156635  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
2.6'-10" South Bend #GF 50-800, power elevating arm, power downfeed, T-Slotted table, 3.5 HP, s/n #4178, 1980s, #155155  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
3'-9" Clausing Colchester, power elevation of column, power downfeed & tapping, 3 HP, s/n #83L 1082, 1983, #155872  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
4'-11" Carlton #1A, radial drill, power elevation, box table, #4MT, 5 HP, T-slotted base, 1966, #152450  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
4'-11" Speedmaster #ERA, power elevation, box table, #4MT, coolant system, 5 HP, s/n #3354, 1970s, #156009  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
4'-12" Breda #R50-1250, radial drill, power elev & clamping, #5MT, 6.5 HP, '87, #150498  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
4'-13" American, 10 HP, 20-1600 RPM, #5MT, heavy duty  Camera icon Spec Sheet RFQ
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave
5'-11" Carlton #1A, radial drill, #4MT, 10 HP, power elevation & clamping, 1982, #149084  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt
   NEW YORK  
3'-11" Ikeda #RM1000, radial drill, power clamp, box table, clean  Camera icon Spec Sheet PDF icon RFQ
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Email: sales@oconnellmachinery.com) W. O'Connell
4'-13" Ikeda #1300, 30/1440 RPM (12), 5 HP, box table  Camera icon Spec Sheet RFQ
O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Email: sales@oconnellmachinery.com) W. O'Connell
7'-19" American Hole Wizard, 25-2000 RPM, #5 MT, #28062  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
8'-19" Carlton #4A, 8-800 RPM, #6 MT, #28061  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
13'-157" MAS #VR84A, 11.8" maximum bore diameter, 3.9" drill capacity, 1400 RPM, power elevation, #27301  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
Johansson, radial arm drill press, serial #31089  Camera icon Spec Sheet RFQ
Zedco Machinery Inc, Rochester, NY 585-458-6920 (Email: productionmetal@rochester.rr.com) Leo Glogowski
Kaukauna #140U, universal travelling, 22" column, 108" reach, 290" travel, lift bail, #20661  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin
Weiler #VOM50, universal radial drill, #5MT, 81.5" reach, 7-Axis motion, 2012  Camera icon Visit Dealer's Equipment Listings  RFQ
Grand Marshall Machinery Inc, Hauppauge, NY 917-576-2510 (Email: sales@grandmarshallmachinery.com) Larry/ Paul
   OHIO  
2.4'-8" Select /Kao Ming #288RD, 15-7/8" x 19-7/8" x 15" H box table, 88-1500 RPM, #4MT, 2 HP, nice, s/n #1071, #29367  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
2.6'-6" Johansson, sliding ram type, tapping attach, manual table adj, power arm elev w/power locks, power down feed, chuck, #27656  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
3'-8" AB Arboga Maskiner #ER830, radial drill  Camera icon RFQ
R H Phillips Equipment Leasing Co Inc, Shelby, OH 419-989-3585 (Email: jphillips@shelbytube.com) Jesse Phillips
3'-9" Cincinnati Gilbert, 3 HP motor, #4MT, reversing, tilting box table  RFQ
Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Email: bgibson@advancedmachinery.com) Bob Gibson
3'-9" Cincinnati, radial drill, nice  RFQ
Stys, Inc, Cleveland, OH 216-641-7897 (Email: sales@stysinc.com) Daniel Stys
3'-9" G & L Bickford Chipmaster, power elevation, tapping, box table, 5 HP, 1971, #28456  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
4'-10" Jet #23032X10(I)/JRD-939, radial arm drill, 18" x 31" x 17" table, s/n #9023406  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn
4'-11" Carlton #1A, 120-3000 RPM, box table, power elevation & clamp, #4 MT, #6663P (6 available)  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
4'-11" Carlton #1A, dual base, 54" x 36" each base, #4MT, 5 HP, s/n #2990, #67591  Camera icon Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-11" Cincinnati Bickford Super Service, power elevation, 14-1500 RPM, #5MT, coolant, 7.5 HP, s/n #2E-717, 1951, #29958  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
4'-12" Clausing Colchester, radial drill, #68335  Camera icon Visit Dealer's Equipment Listings  RFQ Auction item
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-12" Clausing radial drill, #68339  Camera icon Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-12" Fosdick Sensitive, 24" x 48" rectangular rotating table, #4MT, 60-1200 RPM, 3 HP, #27689  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
4'-12" Fosdick, horizontal mounted T-slotted table, 30-1200 RPM, s/n #21387, #BX6655  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand
4'-12" North Bay #412, radial drill, 60" x 31", 42-1750 RPM, #4MT, coolant, 5 HP, #62742  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-12" South Bend #GR-50/1200, #4MT, 40-1750 RPM, power elevation, manual clamp, coolant system, s/n #1132, #29459  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
4'-12" Willis Bergo #8400 Series, #5MT, power elevation & clamp, 5 HP, 1973, #68971  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-13" American Hole Wizard, power elevation, 25-2000 RPM, #5MT, 10 HP, nice, #29959  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
4'-13" Carlton #3A, radial drill, #5MT, power clamp & elevation, 10 HP, #67760  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-13" Carlton #3A, radial drill, power elevation & column, 10 HP, coolant, #68221  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-13" Ikeda #RM1300, 30-1440 RPM, #5MT, power elevation & clamp, 5 HP, serial #70017, 1970, #29099  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
4'-13" Ikeda #RM1300, box table, under power, nice, 1975, Bedford OH  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth
4'-13" Ikeda #RM1375, radial drill, power elevation & clamping, 7-1/2 HP, 1981, #67983  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
4'-13" Ooya #RE-1224, 32-1985 RPM, 28" x 50" table, box table, power clamp  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey
4'-15" American Hole Wizard, power elevation, 20-1600 RPM, #5MT, 20 HP, nice, s/n #73033-52, 1952, #29910  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
4'-15" Carlton, radial drill, 1500 RPM, box table, 10 HP, power clamp  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt
5'-9" Cincinnati Gilbert #82H, radial arm drill, 25" x 48" table, 1725 RPM, 5 HP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn
5'-11" Carlton #1A, radial arm drill, power elevation & column clamp, #4MT, 10 HP, #65426  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5'-11" Carlton #1A, 80-1500 RPM, box table, power elev., clamp, trav., #4 MT, 5 HP, #6569P (2 available)  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
5'-12" Summit #5' H, radial drill, #5MT, power elevation, power clamping, coolant, #68972  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5'-13" Ooya #RE2-1450, radial drill, plain box table, boring, drilling, tapping, power arm elevation, #5MT, #28261  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
5'-13" Ooya #RE2-1450A, boring, drilling, tapping, power arm elevation, 38-1985 RPM, #5MT, 7.5 HP, #28221  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
5'-14-1/2" Soraluce #TR2, 43-2400 RPM, 47" spindle tvl., power elev. & clamping, box table  Camera icon RFQ
Advanced Equipment Systems LLC, Cleveland, OH 216-289-6505 (Email: eric@advancedequipmentsys.net) Eric Starr
5'-15" Carlton #3A, radial drill, #5MT, power elevation, power clamping, coolant, #68600  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5'-15" Carlton #3A, radial drill, #5MT, power elevation, power clamping, coolant, #68717  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5'-17" Carlton #3A, radial drill, 61" x 42" base, power clamp/elevation, #5MT, 15 HP, #67365  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
5.5'-12" Fosdick, radial arm drill, 1100 RPM, 15 HP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn
6'-14" Tos #VRM50, universal radial drill, 16-800 RPM, #4MT taper, power elev., #67935  Camera icon Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
6'-15" Carlton #3A, dual base, 74" x 43" base per side, power.elev./clamp, 15 HP, #53568  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
6'-17" Cincinnati Bickford Super Service, 8-1700 RPM, #6MT, 20 HP, nice, s/n #5E-693, 1953, #29911  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.
6'-19" Carlton radial drill, #6MT, power clamping & rapid traverse, 20 HP, #62218  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
6'-19" Carlton #4A, 10-1000 RPM, power elev.-clamp-trav., box table, 20 HP, #7080P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
6'-19" Giddings & Lewis Bickford Chipmaster #956, tapping-plain-type base, 14-1750 RPM, #6MT, power elevation, 20 HP, #28088  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
7'-13" Carlton, track type, 144-600 RPM, #3MT, 12" spindle travel, stock #5634  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
7'-15" Giddings & Lewis Chipmaster, #5MT, power elev & clamping, 10 HP, 1973, #68329  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
7'-17" Carlton #4A, power elevation-clamp-trav., 12-1200 RPM, #6 MT, 15 HP, #7045P  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger
7'-19" Carlton #4A, radial drill press, 36 spindle speeds 12-1200 RPM, 12" extended extra high column, tapping, #6MT, #27799  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
7'-19" Carlton, 160" L x 50" D base, 20 HP, 4" quill, 750 RPM, ex. height column, #6 MT  Camera icon Visit Dealer's Equipment Listings  RFQ
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt
8'-19" Giddings & Lewis, 30 HP, rapid on head, #6MT, spindle speed 7.9-1000 RPM, nice, 1968  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Cleveland Machinery Sales Inc, Cleveland, OH 216-741-8900 (Email: sales@clevelandmachinery.com) F. Petitt
8'-21" Republic/Lagun, tapping, power, arm elevation, power. clamping, #6 MT, 16-1250 RPM, 10HP, 2009, #27923  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord
13'-36" Sass, #6 taper, 36" spindle travel, 40 HP, 25' travel drill on base, #15890  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
Carlton right angle base for 6'-19" drill, 50-1/4" W x 64" L x 10" H, 5 T-slots, #54383  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales
Jet, radial arm drill, 12" diameter x 46" L, 25" W x 41" L bed, 1977  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn
Webo #WAC-3, 67" L arm x 14" diameter post, 24" W x 32" L table  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: jfrischkorn@hgrinc.com) Jon Frischkorn
   OREGON  
4'-13" Ikeda #RM-1175, radial drilling machine, 30" head travel, 1981  Camera icon RFQ
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Email: Office@faheyinc.com) Jackie Fahey
5'-17" Carlton #3A, radial arm drill, 1951  Camera icon RFQ
Fahey Machinery Co Inc, Lake Oswego, OR 503-620-9031 (Email: Office@faheyinc.com) Jackie Fahey
   PENNSYLVANIA  
2'-7" Arboga Maskinder #ER 825, radial arm drill, speeds 125-1540  RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver
3'-7" Veet #3H, precision radial arm drill, 2 HP  Camera icon RFQ
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone
3.9'-12" Yoshida #YR5-115, 2" drl cap, 1800 RPM, 5 HP, 11.75" strk, #HB-19378  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
4'-9" Giddings & Lewis Chipmaster, #4MT taper, 12k RPM, tapping, box table, #NK-19602  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
4'-11" American Hole Wizard, compound drill table, T-slot  RFQ
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Tom Noone
5.25'-17" Cegielski #WRA-632, 10 HP, 1600 RPM, 3" mild steel, #6MT, box table, coolant, TK-20368  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
6'-15" Carlton #3A, 15-1500 RPM, 18" spindle travel, power clamping to head & arm, #5MT, s/n #3A6008, 1980, #16185  Camera icon Spec Sheet RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
6'-19" Cincinnati Bickford Super Service, 12' sliding base, 1000 RPM  Camera icon RFQ
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone
7'-19" Cincinnati Bickford, radial drill, 4" spindle diameter, 84" maximum height, 93.5" maximum radius, #6MT, 21-1278 RPM, 15 HP, good, 1964  RFQ
Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich
7'-20" Polamco #RD-7, #6MT, 20 HP, 1600 RPM, DRO, excellent, #JV-20413TK  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
8'-19" Carlton, 1500 RPM, power elev & clamping, half moon table, box table, s/n #4A-4631  Camera icon RFQ
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone
8'-19" Cincinnati Bickford Super Service Chipmaster, #6MT, 4" spindle, power elevation & clamping, 1969, #17164  Camera icon Spec Sheet RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand
   SOUTH CAROLINA  
3'-9" Cincinnati Bickford, radial arm drill, 24" x 18" table, 3 HP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
RBI Equipment Sales & Surplus, Woodruff, SC 864-327-8319 (Email: kyle.renfrow@essindustrial.com) Kyle Renfrow
   TENNESSEE  
3'-8" TP 820, like new, PDF, tapping, box table, mfg.Taiwan, UP, 2004, loaded in Tn.  Camera icon RFQ
Winslow's Machine Tool Sales, Lexington, TN 731-614-1296 (Email: machinetoolswinslow@yahoo.com) Don Winslow
4'-13" Cincinnati Bickford #953-64 Chip Master, radial arm drill, power elevation & clamp, 15 HP, 12-1500 RPM, 1965, #13062J  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin
   TEXAS  
3'-9" Cincinnati Bickford, 35" x 42" top table, #4MT, 3 HP, s/n #1R3876, 1946, #3455  Camera icon RFQ
Universal Metalworking Equip., Houston, TX 713-675-4145 (Email: sales@ume-inc.com) M. Feinstein
3'-9" Ikeda #RMS9, box table, 22" vertical travel, 24" horz.travel, heavy duty vise, 1978  Camera icon Spec Sheet RFQ
HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling
4'-9" Cincinnati Gilbert #4-A, radial drill, #4 MT, manual/power clamp, power elevation, 3 HP, 1962, #D570047  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
4'-11" Carlton #1A, No.5 radial drill, 80-2000 RPM, #4MT, tilt box table, 10 HP  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
4'-13" Giddings & Lewis Bickford Chipmaster, radial drill, 1500 RPM, 15 HP, 1966, #D570053  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
4'-13" G & L Chipmaster, #5MT, 1500 RPM, Box Table, 1966  Camera icon Visit Dealer's Equipment Listings  RFQ
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
5'-13" Carlton, #5MT, 15-1500 RPM, 18" spindle tvl, thrdg, power.col.clamp, head tvl, #17337  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
5' Ikeda #RM-1575, drill, 1980  Camera icon Spec Sheet RFQ
Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave
6'-17" Cincinnati Bickford, radial arm drill, power elevation, power column clamp, rapid traverse to head, #17710  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
7'-17" Giddings & Lewis Chipmaster, 40-1600 RPM, power clamping/elevation, 1974  Camera icon Visit Dealer's Equipment Listings  RFQ
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
7'-19" Cincinnati Bickford (G&L), 8-1000 RPM, tapping, box table, coolant, 20 HP, 1956  Camera icon Visit Dealer's Equipment Listings  RFQ
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
7'-19" Cincinnati Bickford Super Service #6E, radial drill, 1000 RPM, 20 HP, serial #6E-980, 1956, #D570016  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
8'-19" Cincinnati Bickford #6E, Super Service, 1000 RPM, 15 HP, #6MT, 24" spindle travel, 1955, #D570061  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
8'-19" Giddings & Lewis Chipmaster #956, 1500 RPM, 30 HP, #5MT, power clamp & elevation, push button controls, 1964, #D570019  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
N & R Machine Sales, Navasota, TX 800-245-3194 (Email: sales@nrmachinesales.com) Randy Nevels
8'-19" G & L Chipmaster, 1200 RPM, 72" under arm, tapping, 25 HP  RFQ
Hesco Equipment Sales Co Inc, Houston, TX 713-699-4766 (Email: hescoequip@msn.com) Bob Hess
10'-34" Giddings & Lewis Bickford, radial arm drill, pendant control, 10' x10' T-slotted table, (2) 42" x 44" T-slotted box tables, #17709  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.
   UTAH  
3'-9" Carlton, HD radial arm drill, 57" u/spin, #5MT, 5 HP, power elev, tilt box table, 669 hrs  Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
3'-11" Cincinnati Bickford Super Service, 7.5 HP, #5MT, power elev, power clamp, box table, vise  Camera icon Spec Sheet Video icon RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
4'-9" Carlton, #4MT, 52" under spindle, 100-2000 RPM, 5 HP, power elevation, tilting box table  Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
4'-9" Carlton, universal box table, 20" x 20" tilting, 50-2000 RPM, #4MT, power elevation  Camera icon Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
4'-12-5/8" Ooya #RE-1225H, radial arm drill, 12 spindle speeds (38-1985 RPM), #5 MT  Camera icon Visit Dealer's Equipment Listings  RFQ
Jorgenson Machine Tools, Salt Lake City, UT 877-978-1789 (Email: quote@jmtusa.com) Bud Jorgenson
4'-13" Carlton, 48" column spindle, 61" u/spdl., 13" column diameter, #5MT, 1500 RPM, #5533  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
4'-13" Cincinnati Bickford, #4MT, 1248 RPM, 7.5 HP, power elev & clamp, power rapid trav  Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
5'-11" Natco Carlton, 54" u/spdl, #4MT, 1140 RPM, 10 HP, power elev.univ tilt box tbl  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
5'-17" Carlton, 60" column to spindle, 72" u/spdl., #5MT, 1500 RPM, 15 HP, power.elevation  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: nicole@machineryconsultants.com) Bill Wilson
   WISCONSIN  
4'-11" Cincinnati Bickford, 35-1850 RPM, #4MT, power clamping & elevation, coolant, box tbl  Camera icon RFQ
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
5'-12" Stanko #2M55, #5MT, 21 speeds, 12 fds, 2k RPM, power elev/clamp, coolant  Camera icon Spec Sheet RFQ
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
6'-15" Carlton #3A, power movements, threading, #5MT, 1500 RPM, 15 HP, 1998, #10003  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer
6'-15" Cincinnati Gilbert, #5MT, 16-800 RPM  RFQ
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker
   ALBERTA, CANADA  
3'-8" VIA Machinery, radial drill press, 1.5" diameter, new  RFQ
VIA Machinery Ltd, Edmonton, AB 780-222-6149 (Email: avaldes@viamachinery.com) Jose Valdes
5'-11" American Hole Wizard, MT-4 spindle, 1500 RPM, 36" x 42" x 22' box table, coolant system, s/n #4708  RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
5'-12" Stanko #2M55, radial arm drill  RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
5'-13" Masteel #MRD20063, radial arm drill  RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
5' Modern Nantong, radial arm drill  RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
5.5'-13" VIA Machinery, radial drill press, 2" diameter, new  RFQ
VIA Machinery Ltd, Edmonton, AB 780-222-6149 (Email: avaldes@viamachinery.com) Jose Valdes
6.5'-16" VIA Machinery, radial drill press, 2.5" diameter, new  RFQ
VIA Machinery Ltd, Edmonton, AB 780-222-6149 (Email: avaldes@viamachinery.com) Jose Valdes
7'-19" Giddings & Lewis Bickford HD Chipmaster, 1000 RPM, 4" capacity, 18 feeds, 30 HP, box table, coolant  RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
Modern #Z3032X10, radial arm drill  RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal
   ONTARIO, CANADA  
5'-15" American Hole Wizard, #5 MT power clamp, 1100 RPM, excellent, 1971  Camera icon Spec Sheet RFQ
Industrial Machinery Exchange, Cambridge, ON 519-622-8353 (Email: Pgeddes@machexch.com) Paul Geddes
   QUEBEC, CANADA  
Richmond, radial drill table, 24" x 36" head swing 180 degree  Camera icon RFQ
Atelier De Mecanique Boivin Inc, Sainte-foy, QC 418-527-1350 (Email: alex@mecboivin.com) Alex Boivin

Photo icon = photo available    Spec Sheet icon = spec sheet available    RFQ icon = request quote from seller    camera icon = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise