MACHINING CENTERS, VERTICAL, CNC: Machinery & Equipment For Sale

CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, VERTICAL, CNC

Used CNC Inc. Specializing in Used CNC Chipmaking Equipment

There are 997 listings in this category
File update: Fri, Nov 20, 2009 01:24

SORTED BY EQUIPMENT LOCATION

Return to original sort
Advanced Search

ALABAMA

Bostomatic #415-1, CNC Vertical Machining Center, 20"X, 14"Y, 16"Z, BDC 3200 Crtl.

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Cincinnati Arrow 1000 VMC, 40"X, 20"Y, 22"Z, rigid tapping, touch screen graphic

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Cincinnati Sabre #1250 VMC, 49.2"X,25.6"Y,25.6"Z,4-axis,#40 taper,22 ATC,1991

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hurco #VMX64/40 VMC, 65.98" X 35.04 Table, 63.98" X, 33.86" Y, 29.92" Z

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mori-Seiki #CV500A, Vertical Machining Center,20.08"X,Y,Z, 21.7"x 29.5" Twin Pallet

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

OKK #3713 VMC, 50"X, 25.59"Y, 25.59"Z, 30 HP, 25 Speeds/4000 RPM, 1995

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

ARIZONA

Haas #VF-2, 30" 16" 20", Cat.40,7500 RPM,20 ATC mag,'98, reblt.in 2002,Ref.#S6000385

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-3, 40"x 20"x 25"travels, 7500 RPM, 15 HP, gear box, 1995, ref #s786233

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-5/40, CT 40, 50"x 26"x 25"trvls, 10k RPM, RT, auger, p cool, #S6000190

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #VF-E, 20"x 16"x 20"travels,Cat 40,20 ATC,7500 RPM,15 HP,1997,ref #s6000081

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #MV-40B, 31.5"x 20.1"x 16.1",w/pallet changer,1992,#S5999833

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #MV-45/40 APC, 2 pallets,30x17.7x19.7",6k RPM,20 ATC,Cat 40,84,#S785028

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

ARKANSAS

Matsuura #RA-1, vertical machining center, #2443

Mauldin Machine Inc, North Little Rock, AR 501-835-5494 (Fax 501-835-5499) Jerry Mauldin

CALIFORNIA

Acroloc #AF15-32, 32"x, 16"y, with Fanuc control (2996)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Acroloc #M-12, Actrion CNC, 12 ATC, Bijur lube, spray mist clnt, Ser.#173, #5469

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

Agma #VMC-115, Fanuc 0iMC,#40 tpaer,43.31"x 21.65"work area,8000 RPM,2006

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Agma #VMC115, Fanuc 21MB, 2006

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Akira Seiki Performa #XR2-XP, Mits.64 ctrl,22"X,16"Y,16"Z,18 ATC,10000 RPM,2005

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Amura-Seiki #VMC2185, CNC. 80"x30x30" trvl, Fanuc 15M, 50 tpr, conv, Nice, 1991

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Bridgeport Interact #412V, CNC VMC,3-axes,12 ATC,#40tpr,14"x34"tbl,17.7"x12.2"x16.14"tvl,6000RPM,7.5HP,Heidenhain TNC151 Ctrl

Great American Group, Woodland Hills, CA 818-884-3737 (Fax 818-884-3561) Roy Gamityan

Bridgeport Interact #720V, CNC VMC,3-axes,18 ATC,#BT-40 tpr,16"x36"tbl,Heidenhain CNC Ctrl,Ser.#70.69,1989

Great American Group, Woodland Hills, CA 818-884-3737 (Fax 818-884-3561) Roy Gamityan

Cincinnati #20V80, Centroid M400, 80"x 30"x 25", 5-axis, #50 taper, #25495

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Cincinnati Arrow 750, 30"x 20"x 20",CT-FNC,4th axis rot,8"3-jaw,7.5 HP,1995,#8329

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

Cincinnati #CFV800I, Fanuc 18i-MB,CTS,12.5k RPM,9"rotary table,tlstk,2005,#27363

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Cincinnati Milacron Sabre 500 VMC, 20"X,15"Y,20"Z, Acramatic 850SX, Cat 40, 21 ATC, 1994, #4960

Scott Machinery, McClellan, CA 916-638-7718 (Fax 916-638-2450) Deanna Payne

Dah Lih #MCV520, vertical, 20" x 15", 1986, #6461

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

DMG #DMU100U Duoblock, Heidenhain ITNC 530,5-pllt pool/changer,Cat.50,10k RPM

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Emco Famup #MCX-650, Fanuc OMC,8k RPM,26"x16"trvls,30 ATC,chip conv.,2 pllts,'92

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Enshu #DT-CL, Fanuc 0MC, 19.7"x 15.7"x 11.8", 10k RPM, 16 ATC, Cat 30, 1993

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Enshu #VMC530, Fanuc 11M control, 20 HP, 4000 RPM, Cat 50, 1988, #3573

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Excel #810, 32"x, 20"y, 22"z, Fanuc 0M control (2997)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Excel #PMC5VT20, 17"X, 25"Y, 17"Z, 3-axis, Fanuc 0M (3008)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Fadal #3020, 30"X, 20"Y, 24"Z,Fadal VH65 rot.tbl.,24 ATC,Cat 40,15000 RPM,2000

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #4020, vertical machining center, Fadal 88HA, 21 ATC, 1993

Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Fadal #4020, 40"x 20"x 20", 10K RPM, good condition, 1999

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Fadal #4020 CNC Vertical Mill, 40" x 20" x 20", 2006

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Fadal #6030HT, 60" x 30" x 30", 21 ATC, rigid tap, 10000 RPM, 8MB memory, 2004

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fadal #VMC15, CNC, 88HS Control, TS-27 Probe, Xtended Memory,1999

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Fadal #VMC15XT, 30" x 16" x 20", 15 HP, 7500 RPM, 1997

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC3016, 30"x 16"x 24" travels, 10k RPM, rigid tap,4th axis,1996,#3640

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC3016, MP32 ctrl,30"x16"x24"trvl,10k RPM,hi-torq.rigid tap,4th axis,1997

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC3016, CNC, 88HS Control, 10K RPM, 30/20/18" trvls, 1996

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Fadal #VMC40, 22"x16"x20",10k RPM,rigid tap,21 ATC,RS232 port,4th prewired,1995

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Fadal #VMC4525D, CNC88HS control,24 side mount ATC,4th servo ht rt,20k RPM,2005

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Fadal #VMC5020, 50"x20"x25" trvl, 88HS cont,Xtended Mem, Rigid Tap,40-tpr,1996

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Fadal #VMC-6030HT, 60"x30"x30"trvls,10k RPM,22.5 HP,21 ATC,#40 tpr,clnt tank,1998

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Famup #MCX-650, vert.pallet center,26"x16"x20",Fanuc OMC,30 ATC,2 pal.,1996

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Fanuc Robodrill #T10, Very Clean, 1993, $15,000.00

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Femco, 50"X, 30"Y, 25"Z, Fanuc OiMC, trade show machine, 2008

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Haas Mini Mill, 4th axis ready, rigid tap, 2001

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #TL-1, excellent condition, low hours, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #TM-1, low hours, excellent condition, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-0, 10k spindle, high speed machining, 2001

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-0E, 10k spindle, C-package options, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-1, 20" x 16" x 20", rigid tapping, 1996

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Haas #VF-1, C-package options, 2000

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-1, CNC machining center, excellent, 2002

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Haas #VF-10, #50 taper, 7500 RPM spindle, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-11/50, 120"X, 40"Y, 30"Z, 30+1 TC, 2006, #73913

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #VF-2, 30" x 16" x 20", rigid tapping, 1994

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Haas #VF-2, 30"x 16"x 20", 36"x 14"table, 7.5k RPM, 15 HP, 1998, #28475

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Haas #VF-2, C-package, thru spindle coolant, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-2, 4th axis,rigid tapping,chip auger,prog coolant,10k RPM,20 HP,1999

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-2SS, like new, very low hours, 2007

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF3, 40"x20"x25"travels,chip auger,24 ATC,7500 RPM,thru spindle coolant,2005

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-3, 40"x 20"x 25"trvls,4th axis,chip auger,20 HP,remote jog handle,2007

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-3, prog. coolant, chip auger, R-Tap, 1995, clean, $19,000.00

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Haas #VF-3, side mount, loaded with options, excellent, low hours, 2006

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-3, 40"x20"x25",7500 RPM,20 HP,chip,1MB P-Cool,rigid tape,floppy,4th ax,'99

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-3, CNC Vertical Mill, pallet changer, 10K RPM, 40/20/25, CT40, 1999

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Haas #VF-3/APC, vertical machining center, 40"X, 20"Y, 25"Z, 2006, #73964

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Haas #VF-4, Linier scales, loaded with options, 2003

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-4APC, automatic pallet changer, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-4APC, 4th axis,remote jog,rigid tapping,auger chip convy,coolant tank,2000

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-4D, 7500rpm,prog.clnt cc 4th-axis ready floppy side mnt tool change,'04

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-5, C-package, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-5, side mount Haas CNC,prog.clnt,chip auger,rigid tap,7500rpm,20 HP,'00

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VF-6, #50 taper, side mount tool changer, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-8, low hours, excellent condition, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VF-9, C-package options, 10k spindle, 1999

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #VM-3 Mold Maker, Haas ctrl,thru spindle coolant,#40 taper,jog handle,2005

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #VM-3 Mold VMC, Haas HS w/4th,40"x26"x25",12k RPM,24atc,30hp,auger,'08

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Hyundai #SPT-V100, 30"x16"trvl,#40 taper,10k RPM,24 ATC,Yasnac control,2002

Active Machinery Dv, Brea, CA 714-572-6838 (Fax 714-572-2837) Karl/Donna

Kasuga Quantum #Q-1000V, Fanuc 18M, #50 taper, 42"X, 24"Y, 25.6"Z, 30 ATC, 1998

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Kitamura Mycenter #2XI Spark Changer, Fanuc 16i-MA,10000 RPM,24 ATC,CT40,2000

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Kitamura Mycenter #2XI-F, w/Sparkchanger, Fanuc 16iMB, 24 ATC, 2003, #1448

Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Kitamura Mycenter 3X CNC VMC, 10K RPM, 1997, Yasnac i80 cont,conv,Clnt,30/18/18

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Kitamura Mycenter #3X-ATC, Yasnac I-80,31"X,16"Y,20"Z, 21 ATC,8000RPM,Cat.40,1998

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Kitamura Mycenter #5X, CNC vertical machining center, 1993/1994, #48430

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Leadwell #MCV550D, 21.65"x, 14.14"y, 20.07"z, Fanuc 0M, w/SMW pallet changer (2995)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #MCV-550S, Fanuc 10M,21.65"X,16.1"Y,21.85"Z,20 HP,16 ATC,BT40 taper,1985

CNC Machine Sales, Orange, CA 805-279-0409 (Fax 805-672-0303) Ross Maehl

Leadwell #MCV6102, 4"x, 16"y, 20.4"z, Fanuc 0M, w/SMW pallet changer w/2 pallets (2992)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #MCV-760AP, Fanuc OM control,30"x 20"x 20",24 ATC,rigid tapping,1994

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Makino #V55, 5-axis VMC, 20000 RPM, HSK-63, options, 2002, $225,000.00

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Matsuura #MAM72-63V, Fanuc 30i CNC, 29.92"x33.27"x24.02",Cat.40,12K RPM,22 HP

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Matsuura #RA-1, Excellent Condition, 1989, $15,000.00

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Matsuura #RA-2, Excellent Condition, 1990, $19,000.00

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Matsuura #RA2-FA-II, pallet changer, Yasnac cont,24"x16"x18",1988,watch video

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Matsuura #RA-IIF, Yasnac CNC control, 30 ATC, 1992, #1494

Manufacturing Solutions, Los Angeles, CA 310-341-3156 (Fax310-9433550) Mike Dieveney

Mazak #AJV25/405 CNC VMC, Mazatrol M32 ctrl, 39"x20"x18", 5000 RPM, 1989

Active Machinery Dv, Brea, CA 714-572-6838 (Fax 714-572-2837) Karl/Donna

Mazak #VTC20B, Mazatrol M32B, rigid tap, 44"x20"x20", 24-ATC,15 HP, 7K RPM

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mazak #VTC41M, 41"x 16"x 20", Yasnac Control, 24 ATC, 1993

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Mikron Agie #HSM400, high speed,Heidenhain ITNC 530 CNC,15"x17"x13"trvls,2004

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Mikron #HSM400, 15.76"X,17.73"Y,13.79"Z, Heidenhain control, 2004, #73817

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Milltronics Partner #1J, 25"x 16", 6k RPM, 12 ATC, conv.CNC, nice, 1996

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Mori-Seiki #M300, CNC dual pallet vertical machining center,15"x 13"x 19",1992

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Mori-Seiki #M300 Partner, Fanuc OMC,10K spdl, 7.5 HP, 20-tools,CT-40,15"x 11"x 19"

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #M300 Partner, Fanuc 10M, 10k spindle, 7.5 hp, 20-tools, ct-40, 15x11x19

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #MV40,CNC, 32"X,16"Y,21"Z,10HP,20ATC,Yasnac ctrl,8k RPM,4th axis tbl.

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Mori-Seiki #MV-40, CNC vertical machining center, 32"x 16"x 21"travels, 1990

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Mori-Seiki #MV-40, Fanuc MF-M4, vertical machining center, excellent, 1991

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Mori-Seiki #MV40A, Yasnac MX3, 8K spindle, 20-tools, CT-40, 23"x 16"x 20"

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #MV40M, Fanuc MF-M7, 15.74x24.80" pllts,Cat.40,30 ATC,22"x16"x18" tvls.

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mori-Seiki #MV40M, CNC vertical machining center, 1993, #52452

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #MV55, vertical machining,Fanuc 11M,40"X,21"Y,21"Z,6k RPM,#50,12"rot.

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mori-Seiki #MV-65/40B, CNC vertical machining center,Yasnac,60"x25"x25"trvls,1990

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Mori-Seiki #MV65B/40 VMC, 60"x25.9"x25.9",10HP,30ATC,CT-40,6k RPM,Yasnac I80M

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #NV5000A/50, 4-axis CNC vertical machining center, 2003, #49739

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #SV400/APC, 23.6" x 16.9"x 18.1", 40 taper, 12000 RPM, 30 HP, 1997

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #SV-50/40, 31"x 20.1"x 20.1", Cat 40, 10k RPM, 20 ATC, 30 HP, 1998

CNC Repos Inc, Anaheim, CA 714-525-7524 (Fax 714-491-8549) Ken Collini

Mori-Seiki #TV-400, twin pallet,22"x 15",8k RPM,20 ATC,BT-30,1900 IPM,super,1997

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Okuma Cadet Mate, OSP5020, 40"x 20"x 20.59", 1996

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Okuma #MC4VAE, Vertical Machining Center, full guards, rigid tap, exc, 1993

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Okuma #MC50VA, OSP 7000L ctrl, 16" Tsudakoma 4 axis RY w/tlstk, 32 ATC, 1997

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #MC-6VA, CNC VMC, 20 ATC,25"x60"tbl,60"x24"x24"travels,20 HP,4000 RPM,oil cooler,Okuma OSP5020M ctrl.

Great American Group, Woodland Hills, CA 818-884-3737 (Fax 818-884-3561) Roy Gamityan

Pratt & Whitney, 19x14x22",Fanuc Tape Drill Mate,Fanuc 0M,rigid tap,tlg,'87,#9170

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

Quantum Kasuga #Q1250, Fanuc 18M,CT50 taper,50"x25"x25"trvls,chip conv.,1997

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Quantum Nishida #Q1500V, CT50 taper,62"x34"x32"travels,Fanuc 18M,2004,#3485

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Quantum #Q1250V, 25" x 50", 50 taper, TSC, chip conv., 1998, $39,900.00 prepped

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Quantum #Q2000VS, 35"x 80", 50 taper, dual chip conv, 1998, $79,900.00 prepped

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Rambaudi Rammatic #1008DT Fidia, multi spdl,204.6x39.3",39.4x39.4x32.1"tvl,5k,#26317

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Schizuoka #SV4020, 20"x 40", 20 ATC, Fanuc 18M control, 1996

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Shizouka #B-10V, Fanuc 6M,#50 taper,24 QATC,vertical machining center

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Shizouka #B-7V, Fanuc 6, 50 taper, vertical machining center, nice

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Supermax Rebel 8, CNC VMC, 65/30/30" travels, Fanuc OM, 40 Taper, Rigid

Rohner Machinery Sales Inc, Fullerton, CA 888-440-4460 (Fax 714-441-1557) Fritz Rohner

Takisawa #MAC-4V, 12" 4th axis, Fanuc 6, CNC mill

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Takisawa #MAC-V3E, Fanuc OM, 30"x 16", 10k RPM geared, 24 ATC, nice, 1991

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Tree #1050, CNC vert.mill,40"X,20"Y,20"Z,20 HP,24 ATC,8k RPM,Siemens ctrl,1996

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Tree #1050/24, 40"x20",DynaPath Delta Autocon,24 ATC,chip auger,20 HP,1994,#6798

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

Tree #VMC 840, Dynapath control, 32"x 16"x 25"travels, 1993

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Tree #VMC-1050, Yasnac 5-axis CNC,Nikken tilt/rotary,40"x20",8k RPM,24 ATC,1996

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Tree #VMC-1050, 40"x 20", Dynapath, twin 24 ATC, 8k RPM, 1993

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

COLORADO

Cincinnati Arrow 750, 30"X,20"Y,20"Z,6000 RPM,24 ATC,Acramatic A2100,1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Deckel Maho #DMU50T, 19"X,17"Y,15"Z, 5-axis,Millplus control,low hours,2002

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Dyna Mectronics #DM4800, 32"X,20"Y,20"Z,Mitsubishi M3 ctrl,24 ATC,rigid tap,'95

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Fadal #4020HT, vertical machining center,40"X,20"Y,20"Z,rigid tap,21 ATC,1993

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Fadal #4020HT, 21 ATC,10k RPM,tool holders,40"x 20"x 20"travels,1989

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

Fadal #VMC2216FX, 22"X,16"Y,20"Z,21 ATC,Cat 40,10-8000 RPM,Fanuc 0i-MC,2007

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

Fadal VMC3016, 21 ATC, 88 HS control, 30"X, 16"Y, 20"Z, 2003

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Fadal #VMC3016, vertical machining center, 30"X, 16"Y, 20"Z, 1997

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Fadal #VMC3016, vertical machining center, 30"X, 16"Y, 20"Z, 1999

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Ganesh #VMC4924, 49"X, 24"Y, 27"Z, 24 ATC, 10000 RPM spindle w/chiller, 2006

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Hurco #BMC-20LR, 22"X, 16"Y, 20"Z, 40 tpr, 14 ATC, Ultimax 3 dual screen, 1992

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

Mazak Mazatech #V-10 VMC, 30"X,19"Y,20"Z, 4500 RPM, Cat 40, 60 tool ATC, 1987

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mori-Seiki #MV55, 41"x21"x22",#50 taper spindle,4th axis w/fixture,excellent,1985

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

Mori-Seiki #MV65/50, Fanuc MF-M6 ctrl,pallet system (4),Cat 50,6k RPM,1995

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

CONNECTICUT

DMG #DMU80, 5-Axis Vertical Machining Center, 2005

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Fadal #4020AHT, machining center, Fadal 88HS control, 21 ATC, exc 1999, reblt.2008

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Fanuc Robodrill #T21IDL, 27"x 19"x 12"travels, Fanuc 16iMB, 20k RPM, nice, 2003

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Hurco #VMX42, 42"x 24"x 24",10000 RPM,24 ATC,full 4th axis,full graphics,2004

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Kira #KN40, 40-axis w/RT,6000 RPM,20"X,14"Y,16"Z,10 HP BT40 spdl,Fanuc 2Li-M,'99

Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Fax 860-388-2740) Ray Magaldi

Kiwa Excel Center #4L, machining center,10 HP, Fanuc 10M,16 ATC, tlg.incl, 1990

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Liechti, 5-spindle, 5-axis, CNC turbine blade / airfoil mill

Strategic Solutions For Indus, Westport, CT 203-227-2808 (Fax 203-222-0128) Casey Mulqueen

Matsuura #MC-510VD, 15" x 30"t able, 20 ATC, 4th axis ready, 1998

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Mazak #SQT15M, CNC lathe w/Mazatrol T-Plus control. 5000 RPM, 1995

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

Motch #119L, CNC vertical turning center, 1995

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Supermax Rebel, 25"x 16"x 24",8000 RPM,Cat.40,Fanuc OM,20 ATC,rigid tap,2000

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Supermax Rebel #3, 40"x 17"x 24",8000 RPM,Cat.40,Fanuc OM,20 ATC,rigid tap,2000

Capital Machine Tools, Fairfield, CT 203-254-1643 (Fax 203-254-1643) David Henchcliffe

Supermax #YCI-FV56A-APC, Vertical Machining Center, Fanuc 18M, 2002

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Teknics #RC520, machining center,7.5 HP, 16 ATC, 6000 RPM, Fanuc 10M, tooling, 1987

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

FLORIDA

Fadal #VMC3016L, 30x16x20",Cat 40,88HS ctrl,21 ATC,15 HP,7500 RPM,rigid tap,'98

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

Fadal #VMC5020A, 50x20x20",Cat 40,88HS,4th ax.tbl,rigid tap,30ATC,clt.thru,'98

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

Haas #VF-4D, 50" x 20" x 25", 20 HP, 20 ATC, 2001

Sierra Victor Industries, Port Orange, FL 386-304-3720 (Fax 386-304-3722) Sam Valenzisi

Haas #VF5/50, 50"x26"x25"travels, 10000 RPM, 5-axis, geared, 2005

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Haas #VF-6SS, 2 pallets,60"x30"x30",12k RPM,extended Z,TSC,Midaco APC,2006

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Matsuura #MC1000V-5, 40" x 20" x 20", 35 ATC, BT45, prewired 4th, Fanuc 11M,1985

Sierra Victor Industries, Port Orange, FL 386-304-3720 (Fax 386-304-3722) Sam Valenzisi

Mazak #V100, Mazatrol M32, X/Y/Z 197"x138"x140",Cat.50,50HP,4K RPM,TSC,1990

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak Vari Axis #500, 80atc,Cat 40,12k RPM,Mazak Fusion 640M 5x,TSC,2-pllt,'04

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak Vari-Axis #630, 5-axis, 2 pallets, Fusion control, 2005

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Supermax Max 3 #VMC-72A, 37"x 16", 24 ATC, BT-40 spindle, good, 1986

Destiny Machinery Inc, Odessa, FL 727-376-2399 (Fax 727-372-8202) Dennis Laliberte

GEORGIA

Hitachi-Seiki #VM40H, 22"x 16"x 16", 8000 RPM, 20 ATC, Yasnac MX-3, exc.

Teck Machine Tool Co, Tucker, GA 770-491-6066 (Fax 770-491-6913) Ryan Rhodes

ILLINOIS

Awea #VP2012, 18M, 79",47",30", 6000 RPM, 30 ATC, 25 HP, RT, 1999

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Bostomatic #300-3P, 7000/40000 RPM, tooling, 18"x 12"x 12" travel, very clean

Quest Machinery Company, Elburn, IL 815-544-9032 (Fax 866-628-1858) Jeff Foster

Bostomatic #505, 5-axis cnc vertical machining center, 1996

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Bostomatic #605, 5-axis CNC Vertical Machining Center, 1998

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Bridgeport Interact #308, 8 sta.ATC,27"X,12"Y,Heidenhain CNC 2500,coolant,lube,#15069

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Bridgeport Interact #412, 17.7"x,12.2"y,11.8"z,Fanuc OM,#40 tpr,12 ATC,7.5 HP,'89

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Bridgeport Interact #412 CNC Vertical Turning Center, 33.10"x 12.60" Table

Barnett Machine Tools Inc, Mount Carmel, IL 618-375-7240 (Fax 618-375-7244) Phil Barnett

Bridgeport #VMC1000-22, Heidenhain iTNC530 Ctrl,22 ATC,1020mm X,610mm Y,610mm Z,1150mm x 580mm tbl,40BT nose,8000 RPM,'04

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Bridgeport #VMC600E, Heidenhain iTNC530 Ctrl,22 ATC,600mm X,410mm Y,520mm Z,840mm x 420mm tbl,40BT nose,8000 RPM,2004

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Brother #TC324N, drilling & tapping machine, Brother CNC 630, 10k RPM, 1997

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Brother #TC-S2A, drill & tap machine, Brother CNC A00, 10k RPM, 14 ATC, 2001

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Burgmaster #VTC330, 33"x 47",12"vert, #45 tpr, 2000 RPM,20 ATC,10 HP,AB7300

Lindoco Machinery, Morton, IL 309-256-1065 (Fax 309-263-1209) John McEllin

Butler Elgamill #HE/8M,244"x,65"y,38"z,40x318"tbl,univ.mill,40atc,Heid.TNC355,'90

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Chiron #DZ12S, 2 spindle,21"x12"x16",full 4th axis,Fanuc 21M,1999,(4)in plant

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Arrow 500, 20"x20"x20", 6000 RPM, Acramatic 2100, 1996

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Cincinnati Arrow 750, 30"x20"x20", 21 ATC, new spindle, 6000 RPM, 10 HP, 1995

Lindoco Machinery, Morton, IL 309-256-1065 (Fax 309-263-1209) John McEllin

Cincinnati Arrow 1000, 40"X,20"Y,22"Z,4th axis,44"x 22"table,21 ATC,cat,#s27341

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Arrow 1000, 40"X,20"Y,22"Z,44"x 22" tbl, Acramatic 2100, #S26728

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Milacron Arrow 1500, Heidenhain TNC426CB,1524mm X,762mm Y,770mm Z,21 ATC,spdl.nose,T-slot, 1998

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati Milacron Arrow 2000, Heidenhain TNC426CB,2032mm X,762mm Y,770mm Z,21 ATC,spdl.nose, 1998

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati Arrow 2000 ERD, 80"X,30"Y,30"Z,22 HP,#40 tpr,Acramatic 2100,clnt,1998

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Cincinnati Sabre 750, 30"x15"x20",34"x17"table,21 ATC,8k RPM,Acra 850MC,1990

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Cincinnati Sabre 750, Acramatic 850,30"X,15"Y,20"Z,21 ATC,give away price,#10464

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Cincinnati Milacron Sabre 1000, Heidenhain TNC360R,1115mm x 515mm tbl,T-slot sub.tbl,1016mm X,508mm Y,558mm Z,21 ATC

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati Sabre 1250, 50"X,25"Y,25"Z,#40 tpr,8k RPM,Acra 850SX,21 ATC,15 HP,'92

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Cincinnati Milacron Sabre 1250, Heidenhain TNC360R,1360mm x 600mm,1270mm X,660mm Y & Z,T-slot sub.tbl,21 ATC

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati Sabre 1250, 49.2"x25.6"x25.6", 4-axis, #40 taper, 22 ATC, 8000 RPM

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Cincinnati Milacron Sabre 1250, Heidenhain TNC360R,twin pallet 1100mm x 600mm,1270mm X,660mm Y & Z,spdl.nose

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Clausing Kondia #B-700, 27"x 16"x 20"travels, 18 ATC, Fanuc OM

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax 773-7250296) Paul Braeseke

Clausing Kondia #HM1060, 40"x 24"x 20"travels, 18 ATC, Dynapath Delta 60

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax 773-7250296) Paul Braeseke

Daewoo ace #V50, M520,40"x 20"x 20",30 ATC,6000 RPM,thru spindle coolant,1996

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Daewoo #DMV400, Fanuc 18M,dual pallet,22"X,15.7"Y,22.4"Z,Cat.40,30 ATC,15 HP,'01

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Daewoo #DMV500, 40"x 20",47"x 20"tbl,40"X,20"Y,20"Z,8000 RPM,#40 tpr,30 ATC,'98

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Deckel #DMF500, 96" x 36.2" x 32.3", 5-axis vertical machinng center, 2005

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

DMG - Deckel Maho #DMU50 eVolution, 5-Axis machining center,Heidenhain iTNC530-3D Ctrl,32 ATC,500mm X,420mm Y,380mm Z,2004

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

DMG - Deckel Maho #DMU50 eVolution, 5-Axis machining center,Heidenhain iTNC530-3D Ctrl,32 ATC,500mm X,420mm Y,380mm Z,2003

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

DMG #DMU50E, Heidenhain 430,21"x15"tbl,19.7",16.5",15",.001°,-180°,18k RPM,2001

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan /Daewoo #3016LD, Fanuc OiMB,30"X,16.1"Y,20.1"Z,20 ATC,CT-40,15 HP,'05

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Enshu #DT-CL,19.7x15.7x11.8",10k RPM,BT30,16atc,1417ipm,Fanuc OM,'95 (2)(1)w/APC

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Enshu #VMC650, 51"x25"x22", BT50, 30 ATC, twin pallet, Fanuc 11M, 1985

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Excel #PMC-5T18, 20"X,16"Y,18"Z, Fanuc 21iM, 21 ATC, #40, 1997-2001 (3)

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Excel #SMT-350, VMC, 13.7"x 9.8"x 9.8", 15k RPM, APC, Fanuc 21M, 100 hrs, 2001

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Excell #PMC10T240, 39.4"X,20"Y,22"Z, Fanuc 18MI, 24 ATC, 8K RPM, 2001

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Fadal #3016, 30"X,16"Y,20"Z,10-10000 RPM,21 ATC,Cat 40,Fadal 88HS,2001,#10788

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Fadal #3016, 30"X,16"Y,24"Z, Fadal 88HS control, rigid tapping, box ways, 2000

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #4020, 40"x20"x20",10k RPM,21 pos.ATC,Cat 40,Fadal multiprocessor ctrl,'01

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Fadal #4020, 40"X,20"Y,28"Z,multi process CNC,21 ATC,Cat 40,10k RPM,2001

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Fadal #4020HT, 40"X,20"Y,28"Z, multiprocessor cont, wash down, rigid tap, 2000

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #6535-40T, 40 taper, 24 ATC, 10000 RPM, 22.5 HP, coolant thru spindle

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Fadal #VMC15, 20"X,16"Y,20"Z, 15 pos.ATC, Cat 40, Fadal 88HS control, 1994

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Fadal #VMC15, 20"X, 16"Y, 20"Z, 88HS CNC control, 1994

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #VMC15XT, 30"X, 16"Y, 28"Z, HS88, 21 ATC, rigid tap, 7500 RPM, 1996

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Fadal #VMC20, Fadal 88 CNC,20"X,16"Y,16 ATC,coolant,RS232 port,7.5 HP,1991

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Fadal #VMC2016L, Fanuc 18i-MB5, 29.5"x16"table, 22"X, 16"Y, 20"Z, 7500 RPM, 2004

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Fadal #VMC2216, VMC, 22"x 16"x 20", Cat 40, 10k & 15k RPM, 1997 (2)

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Fadal #VMC3016HT, CNC 88HS, 30"x 16"x 28", 10000 RPM, 21 ATC, 1997 & 1999

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Fadal #VMC3016L, 38"x16"table,Cat 40,7500 RPM,15 HP,21 ATC,30"x16"x20"travels,2002

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Fadal #VMC-4020HT, Fadal CNC-88HS ctrl,40"x 20"x 20",10k RPM,Cat 40,21 ATC,2000,#2329

Hitech Machinery Sales Inc, Saint Charles, IL 630-443-7865 (Fax 630-443-9404) Bill Raye

Fadal #VMC4020HT, 88HS CNC,40"X,20"Y,20"Z,48"x20"table,10000 RPM,1993

Morris Rezman Machinery Co, Chicago, IL 312-829-2510 (Fax 312-829-1281) Jeff Rezman

Fadal #VMC6030, 60"X,30"Y,30"Z, 10k RPM, 88 HS, 21 ATC, 22.5 HP, 1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Fadal #VMC6030 CNC VMC, 60-1/2" x 30", 21 ATC, 88HS CNC, new 1995

Blackhawk Machinery Corp, Highland Park, IL 888-926-0050 (Fax866-248-8057) C. Perrelli

Fadal #VMC8030, 80"X,30"Y,30"Z, CNC 88HS, 21 ATC, CT40, 10K/RPM 1992

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Fadal #VMC8030, 80"x 30"x 30",#40 tpr,30 ATC,15k RPM,22 HP,Fadal 88HS,'99

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Fanuc Robodrillmate,Fanuc oi-mc,25.6x15.7"tbl,14pos.atc,10krpm,chickwrkhldg,'06

Belter Machinery, Rockford, IL 815-654-3300 (Fax 815-633-3969) Gary Belter

Feeler #FV600A, 24"x16"x16", 6000 RPM, 15 HP, 16 ATC, Fanuc OM, 1993

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Feeler #FV600-APC, Fanuc OMC,(2)30x15"pllts,6k rpm,40 tpr,18atc,4th axis tbl,'91

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Femco #VMC-1685, VMC, 63"x 31.5"x 27.6", 32 ATC, BT 50, 4000 RPM

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Flow Flying Bridge #7XS-55 Waterjet

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Giddings & Lewis #40VF, 480"X,80"Y,40"Z,110"U/R,96"throat,2200 RPM,80 ATC,1992

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

H.H. Roberts #TW50-MCO, 50"X,22"Y,22"Z,Anilam 5300MK,20 ATC,15 HP,#40 tpr,'01

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

H.H. Roberts #TWE600, graphite,24"X,20"Y,8"Z, Anilam 1400M control,24k RPM,2001

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Haas Mini Mill, vertical machining center, 16"X, 12"Y, 10"Z, Cat.40, 10 ATC, 2004

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas Super #VF-2SS, VMC,30"x16"x20",12k RPM,1400 ipm,rigid,4-axis,2004/05 (3)

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Haas Super #VF4SS, 2-APC,(2) 52"x 18"tbls,50",20",25",12k RPM,40 ATC,CTS,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Haas Super #VF6SS, 2-APC,(2) 64"x 28"tbls,64",32",30",12k RPM,40 ATC,CTS,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Haas #VF-0, machining center, 20"X,16"Y,20"Z,20 ATC,4th Axis prewire,rigid,1999

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas #VF-1, machining center, 20"X,16"Y,20"Z,20 ATC,20 HP,4th Axis prewire,1998

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas #VF-1, 14" x 26" tbl, 20"X,16"Y,20"Z, Cat.40, 20 tls, 20 HP, 1998

Lindoco Machinery, Morton, IL 309-256-1065 (Fax 309-263-1209) John McEllin

Haas #VF-10, 120"x 32"x 30",24 ATC,3500 RPM,chip auger,prog.coolant nozzle,1999

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Haas #VF-2, machining center, 30"X, 16"Y, 20"Z, 20 ATC, 10 HP,auto lube,'93,'94 (2)

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas #VF-2, vertical machining center,Haas 32 bit CNC control,4th axis prewire servo coolant nozzle chip auger,1995

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Haas #VF-2B, 2 speed gear box, 24+1 ATC, 30"x 16"x 20", 2005

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Haas #VF-2SS, machining center, Midaco APC, 30"X, 16"Y, 20"Z, 24 ATC, 30 HP, 2006

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas #VF-3, 40"X,20"Y,25"Z, 7500 RPM, 20 ATC, rigid tap, Cat 40, 15 HP, 1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Haas #VF-3APC, 40"X,20"Y,25"Z,(2)18"x48"pallets,7500 RPM,4th wired,rigid tap,'97

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Haas #VF-4, 50"X,20"Y,25"Z,24 ATC,#40 taper,rigid tap,4th prewire,1998

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Haas #VF-4, vertical machining center,Haas 32 bit CNC ctrl w/ext.memory,4th axis prewire,servo coolant nozzle,chip auger,1995

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Haas #VF-4SS, machining center, Midaco APC, 50"X, 20"Y, 25"Z, 24 ATC, 30 HP, 2006

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas #VF-5VMC, 50" x 26" x 25", 40 taper, 20 ATC, 7500 RPM, 20 HP, Haas CNC, 2000

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Haas #VF-6SS, machining center, Midaco APC, 64"X, 32"Y, 38"Z, 24 ATC, 30 HP, 2006

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Haas #VF-E, machining center, 20"X, 16"Y, 20"Z, 20 ATC, Cat.40, 15 HP, 1997

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Hardinge #VMC700, Fanuc 18M CNC control

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki Seicos #18M, 40"x, 20"y, 17.7"z, 30 atc, 12000 rpm

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Hitachi-Seiki #VK55, twin spindle,15 HP,40"X,22"Y,Seikos MII CNC,(2) 20 ATC,#15204

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki #VK55, 2 spindle, 40"x22"x22", (2)20 ATC, #50, 1988, #S26038

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hitachi-Seiki #VK55, 2-spdl,Seicos MII,40"X,22"Y,22"z,#50 tpr,(2)20 ATC,'88

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki #VM40, 30"x16"tbl,6k RPM,7.5 HP,Cat 40,20 ATC,Series MII CNC,'89

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Hurco #BMC30M, 30"X,18"Y,24"Z,8k RPM,Ultimax 3,24 ATC,rigid,10 HP,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Ingersoll Dual Masterhead bridge type,315"x208"x39"x106",Fanuc 150T,'90,#s27864

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll Dual Masterhead bridge type,315"x,208"y,39"z,106"w,360°C,108"x255"tbl,'90

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll HVM, double column, 236"X,118"Y,53"Z,(2)197"x98" pallets,60 ATC,#s27580

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll Masterhead traveling gantry,360"x,220"y,60"z,144"BH,84"UR,360°C,88 ATC,'87

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Ingersoll masterhead traveling gantry, 360"X,220"Y,60"Z,144"BH,84"U/R,#s27451

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Johnford #DMC1500H, 59.1"X,35.4"Y,30"Z, 24-ATC, 63"x 33" tbl,Fanuc 18MC,#S27603

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Johnford #VMC-1024, 43"x18"tbl,40"X,20"Y,22"Z,6k RPM,#40 tpr,10 HP,24 ATC,'96

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Johnford #VMC2020, 80"X,35"Y,28"Z, Fanuc OM, #50 taper, 20 ATC, 20 HP, 1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Johnford #VMC-500, vertical machining center, 24" x 16.1" x 14", 1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Johnford #VMC-750, 3-axis vertical machining center, 1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Kingsbury #VMC600, 60"x50"x18",bridge style,8000 RPM,30 ATC,Fanuc 15i-M,2001

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Kitamura Mycenter #1, 19.9x14x16",10k RPM,BT85,20atc,dual pllt,Fanuc OM,'95 (2)

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Kitamura Mycenter #1, Yasnac I-80, 20" x 14" x 16", 13000 RPM, 20 ATC, 1995

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Kitamura Mycenter #2, 16.1" x 35.4" table, 20 ATC, 1994, excellent

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Kiwa #510 Colt, 20"x16"x18", 16 ATC, 6000 RPM, CT40, Fanuc OM, 1991

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Komo #50/120, 122"x36"cap,32"x120"table,118"X,36"Y,32"Z,3500 RPM,1995,Stk#9820

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Komo #VM-40, vertical machining center, Fanuc 16M CNC ctrl, variable pallet zone system, long X-axis travel 96", 30 ATC, 1996

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Komo #VMC144, 20"x144"table,144"X,20"Y,15"Z,10k RPM,#40 taper,10 HP,1993

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Leadwell #MCV-1300S, 52"X,30"Y,22"Z,Fanuc OMF,Cat 40,6k RPM,30 ATC,20 HP,1993

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Leadwell #MCV-OP, 20"X,14"Y,16"Z,Mits.Meldas 310M CNC,16 ATC,#40 taper,1991

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

LeBlond Makino #SNC106-A5, 39"X,23.6"Y,15.7"Z,Graphite pkg,Pro A CNC,#40 tpr,'96

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Makino #A-77, (2) 25"pallets,32"x30"x32",full 4th,40atc,10k RPM,Fanuc 16MB,#s27343

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Makino Hyper #5, 24"x16"x16",32000 RPM,20 ATC,30"x16"table,1996,#S26414

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Matsuura #MC-1250V, 50"x 24"x 24", 35 ATC, Fanuc 11M, low price, #S27041

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Matsuura #MC760V, 30"X,16"Y,19"Z,Yasnac M5,BT 40,25 ATC,10 HP,tooling,1981

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Matsuura #MC800VG, Yasnac J300,31.5"X,20.08"Y&Z,30 ATC,BT40,1000 RPM,30 HP,'98

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Matsuura #RA4GDC, 16iM,(2)55"x21"pllts,41",20",22",(2)12k RPM,(2)40atc,twin spdl,'01

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Matsuura #RA4GDC, 16iM,(2)55"x21"pllts,41",20",22",(2)12k RPM,(2)40atc,twin spdl,'01

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Matsuura #RA-III-F, 29.92"X,17.30"Y,17.71"Z,(6) 31.50"x 16.50"pallets,30 ATC,1997

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #AJV32/404, M-32,39.4"x 27.56"x 18.1,4000 RPM,30 ATC,probe ready,1988

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak #AJV35/60, 59"X,31.5"Y,20"Z, 60atc,3150rpm,(2)29x69" pllts,Mazatrol M32

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #AJV-35/60, 59"x,32"y,20"z,60atc,3150 RPM,(2) 29"x69"pllts,CTS,Maz.M32,'89

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #AJV60/160, 2 APC,640M,(2)55"x129"pllts,166",55",23",10k RPM,120 ATC,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Hypersonic #1400L, 165.35"x55.12"x23.03",20k RPM,Fanuc 15i,'01,(2),#s27721

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #V515N-2APC, M-Plus,40",20",22",6000 RPM,30 ATC,30 HP,factory 2 pllts,1997

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #V655/60, M32A,60",26",26",6000 RPM,30 ATC,35 HP,CTS,RT,probe,1994

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Variaxes #630 5x,Matrix,20"pllts,25",30",20",-120 30,.001°,12k RPM,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #VCN510C, 640M,41.5",20",20",12k RPM,30 ATC,ATLM,RT,CTS,chip,2005

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Vortex #60/160, 640M,165",55",30", 30"-30",10k RPM,120 ATC,5-axis,2001

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #VQC15/40, 22"x16"x15",16"x35"table,6k RPM,CT 40,30 ATC,Fanuc 11M,1987

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mazak #VQC20/50A, Mazatrol M2, 25"X, 20"Y CNC conv. control w/CRT, clnt, Cat #50, #15526

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #VTC20B, 44"X,20"Y,20"Z,Maz.M32B,24 ATC,7k RPM,#40 taper,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #VTC20B, M-Plus, 44",20",22", 8k RPM, 24 ATC, 20 HP, ATLM, RT, 1988

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #VTC20B,44"X,20"Y,20"Z,57"x20"tbl,8000 RPM,24-atc,Mazatrol M Plus,1998

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #VTC250/50D, 640M,64",25",25",6000rpm,24atc,cts,atlm,4th axis,chip,2002

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #VTC-41, VMC,35"x 16"table,22"X,16"Y,20"Z,7k RPM,#40 taper,15 HP,24 ATC,Mazatrol EIA CNC,chip conveyor,1993

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Mazak #VTC41M, 44"X,16"Y,20"Z,7000 RPM,Maz EIA,24 ATC,15 HP,1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mighty U.S.A. #VMC1250P/G, 54"x,28.5"y,24.5"z,59"x29",4k rpm,20hp,20atc,50 tpr,'93

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mikron Agie Charmilles #VCE800 Pro, VMC,Heidenhain iTNC530 Ctrl,24 ATC,800mm X,500mm Y,540mm Z,40BT spdl.nose,10000 RPM,2008

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Mikron Agie Charmilles #UCP600, 5-Axis machining center,Heidenhain iTNC530 Ctrl.,20000 RPM,HSK-A63 spdl.nose,30 ATC,2008

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Mikron Agie Charmilles #UCP600, 5-Axis machining center,Heidenhain iTNC530 Ctrl.,20000 RPM,HSK-A63 spdl.nose,30 ATC,2007

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Mikron #HSM800, TNC 530,31.5"X,23.62"Y,19.68"Z,36k RPM,HSK-E50,4 APC,probe,'03

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

Mikron #UCP1000, Cat.40, 5ax, 15k rpm,30 atc,Heidn. TNC426PB,39"x39"x25", 1999

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Milltronics Partner 1, 12"x40",Centurian V,15 HP,~500 RPM,25"X,16"Y,20"Z,1995

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Milltronics Partner 10, 100"X,30"Y,24"Z,#40 tpr,Centurian V,12 ATC,10k RPM,'96

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Milltronics Partner 10, Series J Centurian V CNC, 24" x 110", 1996

Blackhawk Machinery Corp, Highland Park, IL 888-926-0050 (Fax866-248-8057) C. Perrelli

Milltronics #RH33, rigid head mill, Centurion 7 Ctrl,78"X,33"Y,28"Z,24 ATC,2007

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Milltronics #RW15, machining center, Centurion 7 Ctrl,25"X,15"Y,20"Z,16 ATC,2005

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Monarch #VMC150, (2) 60" x 36" tables, Fanuc 11m, 40-atc, coolant thru spindle, 1991

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Monarch #VMC150B, 50" x 30" x 24", Fanuc 15MF, Machining Center

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Monarch #VMC45B, 18"x42"twin pllt,Fanuc 16M,CTS,26 ATC,30"X,18"Y,24"Z,#50,'95 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Monarch #VMC75B, 40"x20"cap.,27.5"x54"tbl,40"X,20"Y,24"Z,6k RPM,18 HP,#50 tpr,'92

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori-Seiki Duracenter 5, VMC,Mori/Fanuc MSX-501 ctrl w/Mapps II equipped w/AICC,640 meters memory,99 tool offsets,2004

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Mori-Seiki #M300A1, Fanuc 10M, Cat 40, 20 ATC, indexing table

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Mori-Seiki #M-300L2, (2)21"x32"table pallets,63"X,19.7"Y,18.5"Z,10 HP,#40 tpr,'91

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori-Seiki #M300L2/1600, 2-pllt,88.58"X,19.69"Y,18.5"Z,Fanuc 16MC,30 ATC,BT 40,'98

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Mori-Seiki #MV35/40, Yasnac MX-1, 30"x 13.8"x 17.7", 6k RPM, 20 ATC, 1985

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #MV45/40, 31.5"X,18"Y,20"Z,Yasnac MX2,20 ATC,6000 RPM,1985

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #MV55/50, Yasnac MX2, 40"x 21"x 21", 3500 RPM, 24 ATC, 55"x21"table, 1985

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #MV-65, VMC,Fanuc 16M CNC ctrl,automatic pallet changer,long X-axis travel 60",30 ATC,1995

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Okada #GMC-654 Graphite, 24"x20"x16",25000 RPM,Fanuc 160MC,1996,#S26425

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

OKK #MCV-410, Mits,CNC, #50 taper, 30" x 16.14" x 20", good cond, 1986

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

OKK #MDV55, 180ISMB,40"x21.6"x20",10000 RPM,20 ATC,RT,cts,soft scales,2005

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

OKK #VP400, VMC, Fanuc #180iS-MG,23.6"x 16.1"x 18.1",12K RPM,APC,2006

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

OKK #VP6005X, 160iS,20"pllt,44",24",18",.001°,-160 16°,20k RPM,40 ATC,2005

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

OKK #VP600-5X, 5-axis, trunion style, Fanuc 160IS-MB, 20k RPM, 44"x 24"x 18", 2005

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma #MC4VAE, 30"x 16"x 18", 20 ATC,Cat.40, in plant, 1991 (2), #S26717

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Okuma #MC-50VA, VMC,OSP-7000-M CNC ctrl w/coordinate Calculations Map 2,helical,rigid tapping,remote hand,1996

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Okuma #MC-60VAE, VMC,OSP-7000-M CNC ctrl w/Area Machining Map 4,coordinae Calculations Map 2,programmable,1995

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Okuma #MC-6V, 24" x 60"table, 32 ATC, OSP3000, Cat 50, Excel

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Okuma #MCR20A, 5-face,113"X,98"Y,26"Z,Cat 50,(2) 59"x106"pllts,70 ATC,CTS,1998

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Okuma #MCV16A, vertical double column, OSP 5000M, 2k RPM, 24 ATC, 1984

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma #MCV-4020, OSP E-100M, 40"x 20"x 20", 8000 RPM, 32 ATC, mint, 2005

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Okuma #MX45VAE, 30"X, 18"Y, 17.7"Z, OSP700M, 20 ATC, Cat 40, 1998

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Okuma #MX45VAE, 30"X,18"Y,17.7"Z, Cat 40, 20 pos.ATC, OSP700M ctrl, 2000

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Okuma #MX50HB, 28"X,32"Y,28"Z,(6)19.6"pllts,full 4th axis,150atc,50 tpr,cts,OSP7000

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Okuma-Howa #415V, Onyx CNC, 2 pallet, 22" x 16" x 16", 16 ATC, 1999

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma-Howa #438V, Fanuc 18iM, 2 pallet, 32" x 17" x 17", 20 ATC, 1999

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma-Howa #438V, 32.28x16.92x17.71",10k RPM,20atc,APC,Cat 40,Fanuc 18M,'98

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Republic Lagun #VMC3516,Fanuxom,24"x,16"y,20"z,5k rpm,18atc,'98,low hrs,from school

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Roeders #RP600, 27.5"x21.6"table,23.6"X,19.7"Y,11.8"Z,36k RPM,HSK-E50 tpr,2003

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Sharnoa #HPM40, Tiger 6 ctrl, 40"x 24"x 22", 28 HP, 8000 RPM, 30 ATC, TSC, 1995

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Sharnoa #HPM40, 40"X,24"Y,22"Z, Tiger 5, #40 taper, 30 ATC, 8000 RPM, 1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Sharnoa #HPM65, Tiger 6 ctrl, 65"x 34"x 28", 20 HP, 20 ATC, #50 taper, 1995

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Sharnoa #HPM65, 85"X,34"Y,36"Z, Tiger 6, #50 taper, 30 ATC, 6000 RPM, 1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Sharnoa #SVC-80, Tiger 5 ctrl, 80"x 36"x 28", 3600 RPM, 20 ATC, #50 taper, 1992

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Sharnoa #SVC80, 80"X,36"Y,28"Z, Tiger 5, #50 taper, 20 ATC, 3600 RPM, 1992

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

SNK Nissan #MAX710i-F50, 18iMB5,20"pllt, 34.6",29",22",.001°,-120 15°,2008

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Supermax Max 4, 43"X,23"Y,24"Z,#40 taper,Fanuc OMC,30 ATC side mount,15 HP,1993

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Supermax #V-2110B, Fanuc 18M, 82.6"X,40.1"Y,30"Z, coolant thru, 2001

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Supermax #YCM-V218B, Fanuc 18M, 83"X,34"Y,30"Z, 50 tpr, 30ATC, 400 RPM, 1998

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Supermax #YV560A, MXP-1001, 20 ATC, 22" x 16"x 17", 2001

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Tongil #TNV-40, 35"x16"table, 22"x16"x20", BT 40, 16 ATC, 1991, #4225

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Toyoda #FV45, 32"X, 18"Y, 20"Z, GNII CNC control, 32 ATC, BT40, 1988

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Toyoda #FV45, Fanuc 11M CNC,10 HP,31.8"X,32 sta.ATC,RS232 port,chip conveyor

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Tree Journeyman #310, 10"x44"tbl,Dynapath 10 CNC,2 HP,power knee & draw bar,1988

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Tree #VMC1050/40, 40"X,20"Y,25"Z,Dynapth.Delta 30 Autocon,#40 tpr,8k RPM,1994

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Yamage #YMV-JR500, 39"x 20"x 22", 47"x 20"table, 24 ATC, 2000, #S26417

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Yang #SMV-1000, 40"x 20"x 20",42"x 20"table,20 ATC,Fanuc OMD,2000,#S26416

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

INDIANA

Johnford #VMC850, 20" x 32"travel, 6000 RPM, 16 sta. ATC, Fanuc OM CNC, 1995

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

IOWA

Amera-Seiki #A3, 43x22x22",20 HP,12000 RPM,24 ATC,CT40,CTS,auger,Fanuc 0IMC,'09

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Amera-Seiki #A4, 51x27.5x28",25hp/gear,8k rpm,CT40,CTS,24atc,Fanuc 0IMC/MGI,'09

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Amera-Seiki #A5, 63x31.5x27.5",30 HP/gear,6k RPM,CT50,CTS,32 ATC,Fanuc 0IMC,'09

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Amera-Seiki #VB2, 87x79x35",30 HP,6k RPM,2 spd/gear,CT50,CTS,CC,Fanuc 21iMB,'07

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Amera-Seiki #VB3, 126x79x35",30 HP,6k RPM,2spd/gear,CT50,cts,cc,Fanuc 21iMB,'09

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Amera-Seiki #VB4, 165x79x35",30hp,6000rpm,2spd/gear,CT50,cts,cc,Fanuc 21iMB,'09

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Amera-Seiki #VX5-3,full5-axis,118x40x30, /-40*deg,40hp,12Krpm,50tpr,Fanuc-31ima5,09

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Awea #3016, Fanuc 18MC, 120.5"X,63"Y,30"Z, 6000 RPM, 50 taper, 60 ATC

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Kris McHugh

Chevalier #2040MV, VMC, 40"X-20"Y-22"Z, 16 ATC, 6k RPM, Fanuc O-MD [11988]

N S Machine Corp., Ankeny, IA 515-964-1290 (Fax 515-964-7484) David Bryan

Comet #VMC510P, 3-axis,32"x15.7"table,21"X,16"Y,20"`Z,Cat 40,16 ATC,320M control,#8747

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Fadal #6030, 88HS CNC, 21 ATC, 60"X, 30"Y, 30"Z, rigid, 2000

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Fadal #VMC4525, 45"x25"x32",10000 RPM,24 ATC,#40 tpr,14/20 HP,Fadal 88HS ctrl,#8840

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Fadal, 20x48"tbl, 20x40"tbl trvl, 20" vert, 10,000rpm, 21atc, 40spdl.taper, Fadal 88 cntrl

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Hurco #BMC20, 24"x 14"x 16" (X,Y,Z) #40 tpr, 6K RPM, 16 ATC, Ultimax Dual Screen

Erickson Machine Tools Inc, Story City, IA 800-247-3905 (515-733-2929) Terry Lake

Mazak #VQC2050B, 39.4"X,20"Y,18.1"Z,48.8"x21.6"table,Mazatrol Cam M2,4th axis rotary table,#8806

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Milltronics cnc mill & tooling, 7.5 hp, 240 volt

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Milltronics Partner #1, 12"x 40" tbl, 25"X,16"Y,20"Z, #40 taper, 7.5 HP, #8839

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Milltronics Partner #1E, 24"x16"x16.5",4500 RPM,#40 tpr,6 ATC,Centurian 5 ctrl,#8836

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Mitsubishi #MPA-V65, 49"X,25.6"Y,25.6"Z, 24 ATC, Control NAPII

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Kris McHugh

Mitsubishi #MV65C, 49.2" x 26" x 25.6", 3-axis, vertical machining center

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Mori-Seiki #MV35/40, vertical machining center, 130-6000 rpm

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #MC4VAE, 30"X,16.14"Y,17.72"Z, 20 ATC, 39.37"x16.14"table, #40 taper

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #MCV16A, bridge type mill, 118"X, 63"Y, 15.7"Z, 47"x 122" table

Anderson Tooling Inc, Fairfield, IA 641-469-6667 (Fax 641-469-6669) Kris McHugh

Ooya #RE-1ML, 61x20.5x21.65",15 HP,4k RPM,CT-45,20 ATC,Fanuc 6M,480 V.,v/good

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

KANSAS

Yama Seiki #VMB-1600, 5-axis VMC,63x31.5x31.5",70.8x31.5"tbl,Cat 50,30atc,25hp,'08

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

KENTUCKY

Cincinnati Smart-E 800, Tool Room CNC,vertical machining center, 39.7" x 19.7"

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak Versatech #V100, Machining Center, 197"X, 138"Y, 40"Z,1988, Mazatrol M32

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Mazak #VTC30C, Mazatrol M-Plus control, 78.74" x 29.92" table size, 24 ATC, 1998

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

MAINE

Bostomatic #BD505-HSK,5-ax,40"x,12.5"y,17"z,BDC3200X,8k rpm,Nikken 320mm,5hp,'98

Poliquin Machinery Inc, Auburn, ME 207-784-1999 (Fax 207-795-6198) Greg Poliquin

MARYLAND

Chiron #DZ15KW, 12"X,16"Y,14"Z, Fanuc 18i-MB5, dual spindle, 4-axis table, 2005

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Cincinnati #3-SP, 5-axis, 216"X, 42"Y, 18"Z, Acramatic 950

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati Arrow 2000, 80"X,30"Y,30.31"Z,12 HP,10000 RPM,Acramatic 2100,1999

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati Rail Type, 5-axis 30V,480"X,84"Y,24"Z,30 HP,4000 RPM,Acramti.950,#10291

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati Rail Type,5-axis U5,310"X,146"Y,39.4"Z,30HP,4k RPM,Acramatic 950,#10292

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spdl.,5-axis,600"X,84"Y,28"Z,75 HP,7200 RPM,Acramatic 950,#20052

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spindle, 5-axis 10K, 576"X,84"Y,28"Z, 75 HP, Siemens 840D, #20051

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Cincinnati, 3 spdl.,dbl.gantry,120"of bed w/2 gantries,84"Y,18"Z,30 HP,#20053

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Deckel Maho #DMU80P, univ.mill,Hi-Dyn,5-ax,31.5"x,27.5"y,23.6"z,60atc,'01,#10268

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

Enshu #E130, 15.7" x 11.8" x 11.8", 10K RPM, 12 ATC, Very Good Condition

Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman

Fadal #3016HT, 30"X,16"Y,20"Z, RT, 10K RPM, Chip Conveyor, 1995

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Haas #VF-3, 40"x 20", 20 HP, gear box, 7500 RPM, pallet changer, bank repo, #3468

Norman Machine Tool Ltd, Baltimore, MD 410-633-2300 (Fax 410-633-7737) Mike Norman

Haas #VF-6, 64"X,32"Y,30"Z, 4th & probe ready, brushless, very clean, 1997

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Matsuura V-Plus 800, 31.5"X,21.65"Y,19.69"Z, install, TSC, G-Tech 840DI, 2004

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

Milltronics #VM24, 40"X,24"Y,24"Z, MP11 Probe & Software, Super Clean, 1999

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

SNK #CMV150, 5-axis vertical/horizontal, 78.7"X, 60.2"Y, 66.9"Z, 2008, #10283

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

SNK #CMV150, 5-axis vert/horiz,universal mill,78.7"x,60.2"y,66.9"z,'08,#10283

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

SNK #CNC 3 SP, 5-axis, 120'X, 164"Y, 28"Z, Allen-Bradley 7320, #10769

Industrial Machine Tools Inc, Cecilton, MD 410-275-9933 (Fax 410-275-9935) Sam Tull

MASSACHUSETTS

Daewoo Ace #V35, pallet changer, 1985

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Fadal #10XT, 30"x16"x20", 88HS control, 7500 RPM, Cat 40, very nice, 1994

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Fadal #4020HT, 40"X,20"Y,20"Z,21 ATC,Cat 40,45-2500rpm,2500-10k rpm,'89,#351009

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Fadal #VMC15, CNC 88HS, 20"x 16"x 20", 21 ATC, Cat 40, rigid tap, 1995

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Haas #VF-3, CNC ctrl, 40"X,20"Y,25"Z, 20 position ATC, 10000 RPM, 1999

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Hitachi-Seiki #VA40, 28"X, 16"Y, 18"Z, #40 Cat, 25 ATC, Fanuc 6M, 1982, (847)

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

Hitachi-Seiki #VK45,30"X,19.7"Y,19.7"Z,Meldas Seicos cnc,6k rpm,30 atc,'89(351006)

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Hurco #BMC20LR, 24"x14"x16", Ultimax, 16 ATC, 6000 RPM

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Hwacheon Sirius 2, APC,dual pallets,Fanuc 18MC,22"X,16"Y,18"Z,6000 RPM,1999,#1122

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

Kitamura Mycenter #4X, 44"x22",30atc10k RPM,geared hd,box ways,Yasnac I80,2000

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Kiwa #510 Colt, Fanuc OM, 10k RPM, 20"X,16"Y,18"Z, Cat 40, 16 ATC, 1991, #1144

Wigglesworth Machinery Co, East Boston, MA 617-567-7210 (Fax 617-561-0265) Gifford

LeBlond Makino #FNC74, Fanuc 11M,27.5x17.5x17.5",Cat 40,auto shift,4th ax. indexer

Linden Machine Tools, Natick, MA 508-728-2288 (Fax 508-653-1767) Mike Zirlen

Matsuura #MC-510, 14"x20"trvls,6k RPM,20 ATC,BT-35,Yasnac MX3,rigid tapping,1991

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Matsuura #MC560V, 4-axis,22"x15.7"x17.7",BT-40,30-7k RPM,20atc,MX-3,full encl.,'87

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Matsuura #MCV-800, 4th axis, Tsudakoma rotary

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Matsuura #RAIII, Yasnac MX-3,29.9"x17.3"x17.7",6k RPM,30 ATC,twin pllt,'91,#1420

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Matsuura #RAIII, Yasnac MX3,6k RPM,10hp,geared head,30 ATC,1991,(2) #101518/19

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Shizuoka #SV-4020, 8000 RPM, Fanuc control

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Supermax #FV102A, Fanuc 18M,4th ready,40"x20.4"x21",CT40,10k RPM,24atc,'00,#1412

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Supermax Max 1 Rebel, Fanuc OM,25.5""X,16"Y,18"Z,16 position ATC,8000 RPM,1997

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Supermax #TV116B, 43"X,24"Y,24.8"Z,Fanuc 18M,24"x48"tbl,chiller,auger,'03,#101589

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

MICHIGAN

Amera Seiki #VB-2, bridge mill,87x79x35",87x65"tbl,600rpm,Cat 50,30hp,'07,#S3722

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Awea #SP3016, CNC bridge mill, 128"x 59"tbl,118"X,63"Y,30"Z, Fanuc ctrl,1996, #6777

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vanderziel

Bridgeport #GX1000VMC,40x20x20",24atc,8000rpm,cat40,17.5hp,siemens sinum.810d.'08

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Brother #TC229N, 18.9"X,14.2"Y,10.6"Z, 10k RPM, 14 ATC, 1996, #7595

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Chen Ho #MCV2600, 102"x42"x43",4500 RPM,20 HP,24 ATC,#50 tpr,Meldas CNC ctrl

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Daewoo Diamond #DMV500, Fanuc 18M,40x20x20",8k RPM,Cat 40,side mnt.atc,'99

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Deckel Maho #DMU80P,5-ax,Heidenhain Millplus CNC,25x25"pallt,A-axis tilt/C-rotry,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Depo #MCFV125, 50"x 24"x 30", 6000 RPM, 2-ATC, 2-pallet, coolant thru, 1998 (8342)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Excel #PMC10T24, 40"x 20"x 22"trvl,8000 RPM,#40 tpr,Fanuc 21iM,24 ATC,1997 (8226)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Fadal #3016HT, 30x16x28",32MP HS w/graphics,RT,exp.mem,10000rpm,Cat.40,21atc,15hp

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Fadal #3016HT, 30"X,16"Y,28"Z, #40 tpr, 10k RPM, R.T., 32MP CNC, 2003

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #4020, Fadal 32MP,40x20x20"trvl,47x20"tbl,hi-torque,10k RPM,21 ATC,'90 &'99

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Fadal #4020HT, 40x20x28",10000rpm,Cat.40,21atc,32mp hispd/graphics,rt,tl.presetter

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Fadal #4020HT, 40x20x28", 10000RPM,Cat.40,21atc,32mp hispd/graphics,rt,tl.presetter

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Fadal #4020HT, 40"x20"x20", 10000rpm,21atc,88hs,RT,Cat.40,VH-65 4/5th axis rot.tbl.

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Fadal #4020HT, extended Z TR-65 5th axis table,CNC 88HS cont, 10000 RPM, 1996

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Fadal #4020HT, 40"X,20"Y,28"Z,10k RPM,rigid tap,88HS CNC,4th ax.table,2003

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #4020HT, 40"X,20"Y,28"Z,10k RPM,R.T.,32MP CNC,Fadal 4/5th ax.table,1994

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #4525, 24- station, side mount, ATC 32MP cont. chip auger, box ways, 2002

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Fadal #4525, Fanuc 18iM,45"x25"x32",10K spdl,coolant thru,chip conv.,2005

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Fadal #4525HT, 45"X,25"Y,32"Z,#40 tpr,10k RPM,Fanuc 18iM,CTS,24 ATC,4th card,'05

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #4525VHT, 45"X,25"Y,32"Z,Fadal MP ctrl,auger,10k RPM,30 HP,24 ATC,2002

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal 6030, Fadal 32MP, 60"x30"x30", Tool Touch sensor, 10k RPM, rigid tap, 2000

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Fadal #6030HT, 32MP CNC,60"X,30"Y,30"Z,#40 taper,10k RPM,box ways,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #6535VMC, 65"x 35"x 30" table, 10k RPM, 21 ATC, Fadal 32MP, 2002

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Fadal #VMC15, 20"X,16"Y,20"Z,2500 RPM,Cat 40,21 ATC,rigid tap,CNC 88HS,1994

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #VMC15XT, 30"X,16"Y,20"Z,7500 RPM,Cat 40,21 ATC,rigid tap,Fadal MP CNC,'05

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Fadal #VMC4525, 45"x25"x32",54"x25"tbl,10k RPM,24 ATC,MP-32,clnt thru,'02,#s3723

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Haas #VF-0, 20" x 16" x 20", 10000 RPM, 710 IPM, 20 ATC, 1997, #8218

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-0, 20"X,16"Y,20"Z, 10k RPM, rigid tap, 4th axis drive, 1996

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-2, veritcal milling center, Ser.#1676, 18 ATC, 14" x 36" table, Haas control, 1992

Industrial Asset Recycling, Shelby Township, MI 586-991-0163 () Sales Dept.

Haas #VF-3, 40"X,20"Y,25"Z,CTS,4th card,7500 RPM,20 ATC,rigid tap,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-3, 40"x 20"x 25",7500 RPM,15 HP,20 position ATC,enclosure,1993,#8511

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-3, 40"X,20"Y,25"Z,7500 RPM,20 HP,20 ATC,#40 taper,rigid tap,tooling,2007

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-3, 40"x 20"x 25",clnt.thru spdl,7500 RPM,chip auger,rigid tap,1997,#8498

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-3, Haas CNC,40"x20"x25",7500 RPM,rigid tap,coolant thru,gearbox,1997

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #VF-3SS, 40" x 20" x 25", 12000 RPM, 48"x 18"table, 833 ipm, 2004 (8792)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #VF-3YT, #50 tpr,40"X,25"Y,25"Z,7500 RPM,10" 4th rotary,1000 psi,CTS,2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-4, vertical milling center, Ser.#14868,32 ATC,48"x18"tbl,8"Kurt vice,man.oper.,prog.coolant nozzle,Haas Ctrl,'98

Industrial Asset Recycling, Shelby Township, MI 586-991-0163 () Sales Dept.

Haas #VF-4, 50" x 20"x 25", 7500 RPM, 4th ready, P-Cool, auger, 1996

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Haas #VF-6, 64"X,32"Y,30"Z,#40 tpr,7500 RPM,32 ATC,4th card,scales,tooling,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #VF-6, 64" x 32"travels, 10000 RPM, CT40, 20-tool, 15 HP, chip auger, 1997

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vanderziel

Haas #VF-8, 64" x 40"travels, 7500 RPM, CT40, 20 tool, 15 HP, chip auger, 1996

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vanderziel

Haas #VF-E, Haas CNC, 20"x 16"x 20", 10K RPM, 8 megs mem, Quick Code, new

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #VM3 Mold Maker, 40"x26"x25",12k RPM,24 ATC,CT40,30 HP,probe,low hours,2008

Superior Machinery, Burt, MI 989-770-4827 (989-770-4873) Keith McKay

Hardinge / Bridgeport #VMC-XP3-1000, Fanuc 18iM,40"x24"x24",12k RPM,#40,CTS,'06

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge Conquest #VMC700,Fanuc 18M,10"Tsud.4th ax,28x18x22",8k RPM,Cat 40,'98

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hardinge #VMC1000, 8K RPM,20 pos ATC,linear ways,chip conveyor,Fanuc 0MD,1998

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hardinge #VMC1000, GE Fanuc Series OMD,40"x20"x20",Cat.40,wired for 4th,1999

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #VMC1000II, GE Fanuc Sys II,40"x20"x20",clnt.thru spdl,Cat.40,chip conv,'00

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #VMC600, Hardinge Fanuc System II,20"x20"x20",Cat.40,wired for 4th,'00

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge / Bridgeport #XP3-1000, Heidenhein 530i,40x24x24",12k RPM,CTS,#40 tpr,'05

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hermle #C600U, VMC 5-axis, 23.6"X,17.7"Y,17.7"Z, 16000 RPM, HSK A63, 2003

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Hurco #40SLV, 40"x20"x25",#40 tpr,15 HP,24"x55"tbl,excellent,very little use,1993

Advance Products Corp., Benton Harbor, MI 269-849-1000 (Fax 269-849-2200) David Kraklau

Hurco #BMC 2416DSM, 24"X,16"Y,20"Z,8k RPM,24 ATC,Ultimax ctrl,chip auger,clnt,'00

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Hurco #BMC3017, 30"x17"x24",24 ATC,#40,8k RPM,Ultimax carousel tool holder,1999

Advance Products Corp., Benton Harbor, MI 269-849-1000 (Fax 269-849-2200) David Kraklau

Hurco #MD1VMC, dual screen CNC, 20 pos.ATC, #40, 1986 (8519)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Johnford #SV-32, Fanuc 18M new 2001, 32"x 20"x 24", 8k RPM

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Johnford #VMC1324A, 53"X, 30"Y, 28"Z, 4500 RPM, 24 ATC, 1996, #218158

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Kasahara #J610, Bridge mill, 24"x 40" table, #40 taper, 15 HP, 16 ATC

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Kira #KN40VA, dual pallet,Fanuc 21iM, 6K,12 ATC,19.7"x 13.5"x 15.7",2000,#3777

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Kira #KN40VA, 20"x14"x16",2-pallet,24"x14"tbls,6k RPM,10 HP,Fanuc 21IM,2000,#8538

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Kitamura Mycenter #3X, Fanuc 0M,10k RPM,rigid tap,gearbox,coolant thru,(3) avail.

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Kitamura #4XIF, F16IM, 40"X, 20"Y, 20"Z, 20K RPM, CTS, 40 tap., 40 ATC, 2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Kitamura Mytrunnion, 5-axis, 24.8" platter dia, 20000 spdl, TSC,Fanuc 16IMB,2006

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vanderziel

Leadwell #MCV610CR, 24"X,16"Y,20"Z,35"x20"tbl,8k RPM,Cat 40,24 ATC,Fanuc OM,'96

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

LeBlond Makino #SRC64-A5, 30" x 16" table, 75 HP, 12K RPM, 15-tools, 1993

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Makino #V55, 35"x 16"table, 25 HP, 14000 RPM, 25-tools, Pro 3 control, 1997

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Matsuura #MC510FV, Yasnac I80, 6" 8K RPM, sidemnt.toolchanger

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Mazak #MTV-414/32, 22"x16"x18",36"x16"tbl,Cat 40,24 ATC,10 HP,Mazatrol M-Plus

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mazak #V414/32, M-Plus,coolant thru,41"X,20"Y,22"Z,30 ATC,7k RPM,rotary tbl,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak Vari-axis #630-5X, 5-axis,auto (2) 19.7"sq.pallet changer,80 ATC,12k RPM,30 HP,Cat 40,640 M 5x,2006

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC16B, M-Plus,#40 taper,44"X,16"Y,20"Z,24 ATC,8k RPM,ATCM,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #VTC16B, 44"X,16"Y,20"Z,24 ATC,7k RPM,15 HP,Cat 40,Mazatrol M32B,1994,$24,500

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC200B, 44"X,20"Y,20"Z,4th axis Int'face,10k RPM,20 HP,24 ATC,Cat 40,Fusion 640,2000

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC200B, 44"X,20"Y,20"Z,20 HP,10k RPM,Cat 40,24 ATC,4th axis int,synctap,CTS,Fusion 640M,2001

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC200C, M-640 Fusion,10k RPM,65"X,20"Y,20"Z,24 ATC,#40 taper,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #VTC20B, 44"X,20"Y,20"Z, Mazatrol M Plus, 24 ATC, 8K RPM, #40 tpr,1997

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Mazak #VTC20B, 44"X,20"Y,20"Z, Mazatrol M Plus, 24 ATC, 8K RPM, #40 tpr,1998

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Mazak #VTC20C, 65"X,20"Y,20"Z,(2) 24 ATC,(2) ATLM,8k RPM,15 HP,Cat 40,Mazatrol M32B,1995

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #VTC20C, M-640 Fusion,8k RPM,65"X,20"Y,20"Z,(2) 24 ATC,#40 tpr,15 HP,1999

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #VTC30C, 65.35"X,29.92"Y,26"Z,15 HP,8k RPM,Cat 40,21 ATC,Maz.M-Plus,'98

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mighty Viper #2100E, geared head,80"x41"x32",scales,Mits CNC,#50 tpr,32 ATC,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mighty Viper #VMC 2100 A, 80"X,40"Y,32"Z, 30 HP, 30 ATC, Mitsubishi 530, 2000

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mighty Viper #VMC2100, 81"X,41.3"Y,32.3"Z,#50 tpr,32 ATC,6k RPM,Mits.Meldas,'00

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mighty Viper #VMV2100B, 80"X,40"Y,32"Z, 6k RPM, 30 HP, Cat 50, Mitsubishi Meldas, 2000

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Monarch #PMC-V750, 29.5"x17.7"x21.7", 22 ATC, 8000 RPM, 35 HP, good, 1989

Superior Machinery, Burt, MI 989-770-4827 (989-770-4873) Keith McKay

Mori-Seiki #MV Junior, Fanuc 10M,22"X,16"Y,18"Z,#40 taper,6k RPM,20 ATC,1987

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #MV-JR, 22"X,16"Y,18"Z,Fanuc 10M,20 ATC,#BT40 tpr,6k RPM,'86,#3646

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mori-Seiki #NV5000A/50, MSG501MB control,43.3"x 23.6"table,8k RPM,30 ATC

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Nicolas Carrea Euro #2000, 79"x 39" table, 49" betw.col,26 HP,Fanuc 16iM, 24 tools

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

NTC #NV4S, 19.7"x17.7"x17.7",Twin pllts,12K RPM,thru spd.clnt,Fanuc 21,1999 (8363)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

NTC #NV4S, RT,2 pllt,20"x19",20"X,18"Y,18"Z,Cat 40,12k rpm,1000 psi thru spdl,'99

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

OKK #MC-660, Fanuc 16M,(2)24"x42"pllts,50"x25.9"x25.6",4500rpm,box ways,60atc,'97

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

OKK #MCV550, OKK CNC,41.3"X,21.6"Y,22"Z,30 ATC,#50 taper,25 HP,R.T.,1992

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

OKK #MCV550, 41"X,21"Y,30"Z,30 ATC,#50 tpr,25 HP,R.T.,Mits M330M-V,'92,#s3573

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

OKK #MCV-660, Fanuc 16M, pallet changer,50 tpr,4500 RPM,25 HP,chip conv,1997

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

OKK #MCV860, Neom (Mits.)635,6k RPM,#50 taper,80"X,34"Y,28.3"Z,30 ATC,1999

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

OKK #MCV-860, 80"x34"x28.5",30 ATC,#50 taper,6000 RPM,Neo 635 CNC,1999,#3649

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

OKK #PVC55, 28"x 40" tbl,30 HP,20 Tools, 10K RPM, 50 tpr, Neomatic MS20MR cont.

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

OKK #VM5II, 40"X,20"Y,17"Z,30 HP,13k RPM,Cat 50,20 ATC,auger,Neomatic M635,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

OKK #VM5II VMC, 40"x20"x17",14k RPM,Cat.40,20atc,chip auger,Neomatic M635,'01

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

OKK #VP600, Fanuc 18iMB,(2) 20"x32"rot.pallets,CTS,12k RPM,60 ATC,30 HP,2006 (2)

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

OKK #VP600, pallet changer,Fanuc 180SI-MB,44"x24"x18",12K RPM,clnt.thru,2005

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma Cadet Mate 4020, #40 tpr,40"x20"x20",OSP U10M ctrl,20 pos ATC,2000,#11352

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma Cadet Mate 4020, OSP 700M,40"x20"x20",20 ATC,8000rpm,R.T.,1999,#S-3598

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Okuma Cadet Mate 4020, OSP700M,40"x20"x20",8k RPM,20 ATC,CTS,I-Map,tap,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma Cadet Mate 4020, #40 tpr,40"x20"x20",OSP U700M,20 pos.ATC,1999,#11353

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma Cadet Mate 4020, #40 tpr,40"x20"x20",OSP U700M,20 pos.ATC,2000,#11354

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma Cadet Mate 4020, OSP700M,40"X,20"Y,20"Z,DNC-B,4th indx,8k rpm,#40 tpr,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma Cadet Mate #V4020VMC, 40" x 20" x 20", 8000 RPM, 40 tpr, 15 HP, 2000 (8769)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Okuma #MC3016V, OSP U10M,6" 4th Axis,30x16x17,coolant thru,chip conv.,2002 (2)

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma #MC4VA, 39.3"x 20.8",25"X,17"Y,18"Z,20 ATC,OSP 5000 M-G,4th axis,1990

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Okuma #MC50VA,OSP7000M-H,#50,41x20x22.5",32atc,4th/5th Tsudakoma,5k RPM,'99

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #MC-60VOE, OSP7000M,50"X,25"Y,24"Z,5k RPM,#50 tpr,20 ATC,rigid tap,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #MCV-20AII, OSP7000M,bridge,157"X,78"Y,34.5"Z,6k RPM,#50 tpr,24 ATC,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #MCV-AII, bridge mill,OSP7000,157"x78.7"x17.72"spdl,45"u/rail,6k RPM,1998

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Okuma #MX45VA, OSP-700M, 22"X, 18.1"Y, 17.7"Z, 10 HP, 20 ATC, 1997 [625]

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Okuma-Howa #511 Millmac, Fanuc 16i,24 ATC,40"x,20"y,20"z,#40 tpr,10k,4th dr.,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma-Howa Milmac #511V, 40"x20"x20",30 HP,10k RPM,CT 40,24atc,Fanuc 16iM,'00

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Roeders #RFM600/S Graphite machine, 42000 RPM,18 HP,18 ATC,HSKE 40 taper,RMS6 control,2003

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Shizouka #SV-4020, 52"x20"table, 20 HP, 21 ATC, rigid tap, helical, 1994

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Supermax Rebel 3, Fanuc 0M, full enclosure, 8k RPM, 24 pos ATC, 1995, #11316

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Supermax Rebel 3, Fanuc OM,40"x17.4"x24.8",8k RPM,24 ATC,box ways,rigid tap,'95

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Takumi #V8A, Mits.530,31"x20"x18",8k RPM,Midaco auto.chgr,#40 tpr,24 ATC,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Toshiba #JRV450,Tos.888,30ATC,10K RPM,28"X,18"Y,18.5"Z,Midaco pllt.ch,40tpr,'99

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Toshiba #JRV450N, Tosnuc 888,28.5"x18"x18.5",10k rpm,#40 tpr,30atc,full encl.,'98

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Toshiba #MPF-2114C, Tosnuc 888,82x55x28.1"trvl,8k rpm,24atc,Cat 50,71"x55"tbl,'99

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Toshiba #MPF2640C, Tosnuc 888,157x102x31"trvl,8k rpm,24atc,Cat 50,78"x157"tbl,'99

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

MINNESOTA

Aital Mac Smart 3500, pendent control, 11000 RPM, 25 ATC, ISO 40, 2005

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Awea #SP3016, Fanuc 18MC, 112"x 59"table, #50 taper, 6000 RPM, 60 ATC, 2002

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Bridgeport #TC3 Torq-Cut, Fanuc 21iM, 10k RPM, BT40, 30"x 16"x 20", 4th axis dr,2000

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Chiron #FZ08S,GE/Fanuc 21MCN,24.4"x10.6"tbls,10500 rpm,HSK32,12atc,5hp,1997

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Chiron #FZ08W, GE/Fanuc 21MCN,(2)17.7"x11.8"pallets,10500rpm,HSK-32,12atc,'97

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Cincinnati Lancer 1250, Acra 2100,thru-spdl,probe,chiller,30 ATC,Cat 50,1997

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Cincinnati #U-5, 5-axis rail type CNC profiler,360",144",39.4",4k RPM,#50 tpr,'01

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Cincinnati #V5-2000, 5-axis,80"x 30'x 30",15k RPM,35 HP,HSK-63A tape,'00 (2)

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Daewoo Ace #V30, 20.1"X, Fanuc OM, dual table, 6000 RPM, 12 ATC, 1989

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Daewoo Mynx #500, 39"x17"tbl,40.20"X,20.10"Y,22.60"Z,8k RPM,10 HP,Fanuc 12M,'00

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Dah Lih #MCV1020, 40"X,Fanuc OM,20"x 51"T-slotted table,Cat.50,1992,FOB Elk River,MN

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Enshu #S400, 25.6"X, Yasnac, 10000 RPM, 2 pallets, 20 ATC, 2000/2003, #49654

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Excel #PMC5T18, Fanuc 21M,8k RPM,Cat 40,4th axis w/Tsudakoma 6"rotary,1996

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Excel #PMC5T18, Fanuc 21M CNC control, full 4th axis drive, Tsudakoma 6"

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax952-933-7229) J.Van Heuveln

Excel #PMC5T18, Fanuc 21M CNC control, full 4th axis drive, Tsudakoma 6"

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax952-933-7229) J.Van Heuveln

Excel #PMC5T18, Fanuc 21M CNC control, full 4th axis drive, Tsudakoma 6"

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax952-933-7229) J.Van Heuveln

Excel #PMC5V, 20"X,16"Y,18"Z, 7.5 HP, 10k RPM, 21 ATC, rigid tap, BT40

Naab Sales Corporation, Hopkins, MN 800-229-6222 (Fax952-933-7229) J.Van Heuveln

Excell #810, Fanuc OM,32"x20"x2",6000 RPM,side mount ATC,Renishaw probing,1994

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Fadal #3016HT,vertical machining center,88HS CNC Ctrl,4th Axis,clnt.thru spdl,'96

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Fadal #3016HT, Fadal CNC 88HS control, 4th axis, coolant thru spindle, 1996

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Fadal #VMC15, 20"X, 16"Y, 20"Z, Fadal 88 ctrl, 16 ATC, 1994

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Fadal #VMC-2216HT, 22"x 16"x 20", CT 40, 10k RPM, cool power, mulitproc ctrl, 2003, 2002

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Fadal #VMC40, 88HS CNC, 39"x16"tbl,22"X,16"Y,20"Z,7500RPM,21ATC,4th-axis rtry,'94

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Fadal #VMC4020, multi proc ctrl,4-axis,Fadal rotary table,Cat 40,10k RPM,2001

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Fadal #VMC4020HT, 10K RPM, Cat.40, rigid tap, 21 ATC, coolant, 1996

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Haas #1, haas cnc, 20 atc, programmable coolant nozzle, haas 4th axis, 1995

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #1 VMC, Haas CNC, 20 ATC, programmable coolant nozzle, Haas 4th Axis

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Haas #VF-1, vertical machining center, Haas CNC Ctrl,14"x26"tbl,#40 tpr,20 ATC,'00

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Haas #VF-1, Haas cnc control, 14" x 26" table, #40 taper, 20 atc, 2000

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #VF1, 20"x 16"x 20"travels, Haas CNC, Cat 40, 7500 RPM, 4th axis, 1994

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #VF-1, VMC, Haas CNC, 20"x16"x20"trvls,Haas CNC,Cat.40,7500rpm,4th Axis,'94

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Haas #VF-2, Gearbox, 500 RPM, 4th axis, prg.clnt, CT40, 20 HP, new 2000

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Kira #KN30VS, 3-axis CNC VMC,11.8"x23.6"T-slot tbl,15.76"X,9.8"Y,11.8"Z,12k RPM,12 pos.trrt,Cat 50,Fanuc Series O-Mate,'94

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Kira #VTC-30E, CNC VMC,3-axis,126"x19.7"T-slotted tbl,17.3"X,11.4"Y,10.6"Z,12k RPM,10 ATC,BT30,Fanuc 21M,1996

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Kitamura Mycenter #1 CNC vert. drilling/machining center, (2) 11.8"x 19.7"pallets w

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Kitamura Mycenter #1/485, 19.1"X, 19"x13"x16"travels, Fanuc 0M CNC, 1990

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Kitamura Bridgecenter 8, Fanuc 15M,80"X,42.7"Y,27.9"Z,3,500 RPM,#50 tpr.,1996

Haider Machinery Inc, Eden Prairie, MN 952-975-4975 (Fax 952-975-4977) Gary Haider

Lagun #3516, 30"x16"x20"travels, #40 taper, Dynapath CNC, 1997, #944130

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Matsuura #MC-600VF, 3-axis CNC VMC,15.74"x34.64"T-slot tbl,23.62"X,16.14"Y,18.5"Z,8k RPM,20 ATC,Cat 40,Yasnac CNC,10 HP,'98

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Matsuura #MC760V-DC, twin spdl,(2) 25 ATC,BT-40,30"x16"x19",(2) Haas indexers,'84

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Matsuura #VMC-RA-II-DC, twin spdl,2-pallet,23.6"x16.1"x18.5"trvl,(2) 20 ATC,MX3 ctrl,1991

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Mazak #VNC510ii, 4th axis, 12000 RPM, probing, Matrix control, 2007

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mazak #VTC16A, 22" x, 1994, mazatrol m32b, 35" x 40", cat 40, 8,000 rpm, 20 atc, fob prese

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mazak #VTC300 C, 65.35"x 30"x 26", Fusion 640M, 12k, 24 ATC, 2009

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mighty Comet #VMC500P, 20"X, Mitsubishi M3, Cat 40, 6000 RPM, 16 ATC, 1994, fob: Mn

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Monarch #VMC-150, (2) 30"x 60"pallet,50"X,30"Y,26"Z,30-3500 RPM,Fanuc 15M,1991

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Mori-Seiki #MV40B, Fanuc 10M,8000 RPM,31.5"x16"x20",tool holders,full enclosure,1988

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #MV-40B, vertical machining center, Fanuc 16M control, 8k RPM, 1995

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #MV40E, MSC-520, 22"x 16"x 18", 6"Tsudakoma rotary, 1996

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #MV45A, 23.6"x18"x20",10000 RPM,Fanuc 10M,8"Haas index full enclosure,1988

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #MV-55B/50, vertical machining center,6k RPM,30 tool ATC,#50 taper,1996

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #VM653-40, 60.2"x 26"x 25.6"travels,Cat 40,12k RPM,40 tool smtc,2008

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Okuma #MB46VAE, OSP-100Mm, 20"x40" table, cat40, 15,000 rpm, 32 atc, w/4th axis, 2004

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Okuma #MC-50VA, CNC VMC,3-axis,20"x 51.1"T-slotted tbl,41.3"X,20"Y,22"Z,5k RPM,20 ATC,Cat 50,OSP7000 CNC,20 HP,1995

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma #MC-50VA, CNC VMC,4-axis,20"x51.1"T-slotted tbl,41.3"X,20"Y,22"Z,5k RPM,20 ATC,Cat 50,OSP5020 CNC,20 HP,1993

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma #MX45V, CNC VMC,3-axis,22"X,18.1"Y,11.7"Z,18"x 30"T-slotted tbl,7k RPM,20 ATC,BT40,OSP700M CNC,hi-pressure clnt,RS 232

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma-Howa Millac #561V, CNC VMC,3-axis,22"x53"T-slotted tbl,41.3"X,22"Y,20.5"Z,10k RPM,20 ATC,Cat 50,Fanuc 16iMB,30 HP

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Sajo #40, true 5th axis HMC, Fanuc 15MB, 15.75" x 19.5" pallets, 96 ATC

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Sakazaki #SMC-40 (8M), 11.8", 4 spindles, 10"between spindles, 1991, #49710

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Supermax #FV-56T, drill/tap machine.Fanuc 18M,23"x16"x18",10k RPM,Cat 40,16 ATC

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Takisawa #MAC-V2E, 35.4"x16.4"tbl,22.04"X,16.14"Y/Z,7.5hp,6000rpm,Fanuc 10M,'91

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Takisawa #MAC-V410, 30"X, fanuc om, 35.4"x16", bt40, 10,000 rpm, 1992, fob: minnesota,

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Toyoda #FV80, Fanuc 11, 32 ATC, 96" x 32" x 30", 4000 RPM, #944392

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Tree #VMC-750, VMC, 24"X, 19"Y, 19"Z, PC-2100 control, 20 ATC, BT43, 1999

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

MISSOURI

Fadal #6030HC-VMC, Fadal cont, Ser.3504621, 10-1000RPM, 22.5HP, 62"x 30"tbl,1996

Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield

NEW JERSEY

DMG #DMU50T, 5-axis,19.7",17.7",15.7",10k RPM,probe,like new,out of gov't.lab,2002

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mark Piedmont

Mazak #V10N, 40"x 20"x 20", machining Center, 30 ATC, 15 HP, Fanuc 6M,1985

Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Fax 973-992-8334) Michael/ Dave

NEW YORK

Awea #VP2012, 78.7"X,47.2"Y,30"Z, 30 ATC, chip conv, Fanuc 18MB, 1999, #18921

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Bridgeport Interact #720, vertical, 30"X,15.75"Y,17.7"Z,TNC 355,20ATC,BT40, 1990

R C M Industries Inc, Bayville, NY 516-628-0582 (Fax 516-628-0527) Richard Muller

Brother #TC225, 16.5" x 11.8"travel, 10 ATC, in plant, 1991

Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Fax 631-694-9415) Irv Richlin

Cincinnati Arrow 750, 30"X,20"Y,20"Z, Cat 40, 6000 RPM, CT Arrow, 1995

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Cincinnati Sabre 500, 20"X, 20"Y, 22"Z, 10000 RPM, Acramatic 850SX CNC, 1993, #15814

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Dah Lih #MCV1020BA, 40"X,22"Y,20"Z,16 ATC,Fanuc 18M,rigid tap,2000,#16246

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Dah Lih #MCV2100, 83"X,33"Y,30"Z, 32 ATC, BT-50, Fanuc 0M, 1996, #16245

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Enshu #ES-400, 25.5"X,17.7"Y,18.1"Z, 8000 RPM, 1417 rapids, 10 HP, clean, 2002

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Enshu #VMC530, 40"X,21"Y,22"Z, 30 ATC, Cat 50, Creative Evolution CNC, 1984, #18251

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Fadal 4020, auto pallet changer, rigid tapping, 10,000 rpm, 88hs cnc, 1996 #19168

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Fadal #4020-HT, 4th axis w/rotary table,side mount 24 ATC,10k RPM,20 HP,mint,2005

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Fadal VMC15-XT, 88s,30"X,16"Y,20"Z,7500 RPM,15 HP,21 ATC,rigid,6800 hours,1996

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Fadal #VMC15XT, 30"X,16"Y,20"Z, Cat 40, 7500 RPM, rigid tap, 32 MP, 1994

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Fadal #VMC6030, 60"X,30"Y,30"Z, 21 ATC, 10K RPM, Fadal 88HS CNC,1998,#17914

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Forest Line Majormill, 45 ATC,360"X,96"Y,36"Z,42 HP,3200 RPM,univ head,Fanuc15M,1990,#16770

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

G & L #924-25VSP, 50"X,40"Y,40"Z,4k RPM,25 HP,(2)36"sq.pllts w/changer,1986

O'Connell Machinery Co, Buffalo, NY 716-877-3666 (Fax 716-877-1136) W. O'Connell

Haas #VF-3, 40"X,20"Y,25"Z, 7500 RPM, BT40, 20 ATC, Haas 4x CNC

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Haas #VF-5, 50"X,26"Y,25"Z,4-axis,24 ATC,10k RPM,40 HP,HSM,chip auger,2001,#17994

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5, 50"X,26"Y,25"Z,4-axis,24 ATC,10000 RPM,40 HP,2000,#17995-17996

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5, 50"X,26"Y,25"Z,4-axis,24 ATC,10000 RPM,40 HP,Haas CNC, 2000,#17996

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5B, 50"X,26"Y,25"Z,4-axis,24 ATC,10k RPM,40 HP,HSM,GB,many options,2002,#17991-17993

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5B, 50"X,26"Y,25"Z, 4-axis, 24 ATC, 10k RPM, 40 HP, HSM, Haas CNC, 2002, #17993

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-5B, 50"X,26"Y,25"Z, 4-axis, 24 ATC, 10k RPM, 40 HP, Haas CNC, 2002, #17992

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #VF-6B, 64"X,32"Y,30"Z,BT 40,side tool changer,coolant thru,7.5 k,2005

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Haas #VF-7/50, 84"X,32"Y,30"Z,20 ATC,4-axis rot.table,Cat 50,chip auger,40 HP,1998,#18405

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Heckert #FQW-560TNC, vertical machining center,54"X,28"Y,21"Z,vert/horiz swivel head,2240 RPM,25 HP,#17807

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Hitachi-Seiki #VA-40, CNC vertical machining center

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Hitachi-Seiki #VM40, 22"X,16"Y,16"Z,20 ATC,6k RPM,Seiki-Multi M CNC,1987,#15899

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hitachi-Seiki #VM50, pallet changer,29.9"X,20.1"Y & Z,Cat 40,8k RPM,Siecos 10M,'98

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Hurco #BMC30, 30"X, 20"Y, 20"Z, 30 ATC, Ultimax CNC dual CRT, #17507

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Frank DiSalvo

Hwacheon Sirius II APC, 22"X, 16"Y, 18"Z, 8k RPM, Fanuc 18MC, 2 pallets, 1998

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Hyundai #SPT-V30T drill & tap, Yasnac MX-3 w/4th ax rot tbl,8k RPM,mint,2000

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Kawasaki, travelling gantry drill,708"X,205"Y,thru tool coolant,Fanuc 15M,1997,#18298

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

K & T #VB-4, 40"X,22"Y,20"Z,68"x 24"table,#50 taper,4000 RPM,30 ATC,Gemini E CNC,#17811

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Kia #VA40, 28"X,18"Y,16"Z, Fanuc OM 4-ax, 8" rotary, BT-40, 6K RPM, 1994

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Kitamura Mycenter #1, 20"X,14"Y,16"Z, 13k RPM, BT35, rigid tap, Fanuc OM, 1993

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Kitamura Mycenter #1XI, Yasnac I-80, 15000 RPM, 20"x 14"x 16", rigid, 2002, exc.

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Kuraki #KV-1000, 41"X, 24"Y, 24"Z, Fanuc 15M, BT-50, 3500 RPM, 32 ATC, 1990

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

LeBlond Makino #SNC106, Graphite VMC,dual pallet,41"X,23"Y,22"Z,15k rpm,BT40,'93

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Leblond makino snc-64, x-23.6", y-15.7", z-15.7", makino pro-a cnc, 15 atc, 1993, #18936

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Makino #S56, 35.4"X,19.7"Y,17.7"Z,20 ATC,13000 RPM,Cat 40,Makino Pro 3,2003,#18263

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #MC-1000V, 41"X,20"Y,22"Z,Tsudakuma rotary,Fanuc 11M4X,box ways,1985

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Matsuura #MC-1000V, 41"X,20"Y,22"Z,Tsudakoma rotary,Fanuc 6M4X,box ways,1980

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Matsuura #MC500-V2DC, 20"X,14"Y,17"Z, Yasnac MX-1 CNC, (2) 20 station ATC, 1985, #18620

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #MC-500V-DC, twin spindle,Yasnac MX-2,6k RPM,20"X,BT 35,7.5 HP,clean

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Matsuura #RA-4G, 40"X,22"Y,20"Z,2-APC,30 ATC,15000 RPM,Yasnac J300 CNC,2000,#17517

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Matsuura #RAII, 20"X,16"Y,18"Z,7000 RPM,20 ATC,dual pallets,rigid tapping,1989

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Matsuura #RA-II, pallet changer,23.6"X,16.1"Y,18.5"Z,BT40,7k RPM,Yasnac MX3,'88

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Matsuura #RA-IVF, 40"X,20"Y,20"Z, 30 ATC, 8000 RPM, Yasnac i80 CNC, 1996, #18922

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #V10N, 40"X,20"Y,20"Z, Cat 40, 4500 RPM, 30 ATC, M-32A, 1989

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mazak #V550, 41"X,22"Y,21"Z, Cat 50, 30 ATC, Mazatrol M-32A, 1990

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mazak #VQC-20/40B, 40"X,20"Y,18"Z,30 ATC,6-pallet stacker,chip conveyor,1987,#17456

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #VTC16C, 65"X,16"Y,20"Z,Mazatrol M32B,(2) 24 ATC,Cat 40,7k RPM,1995,#47449

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak #VTC-16C, 65.4"X,16.1"Y,20.8"Z,Cat 40,(2) 24 ATC,M32B,7000 RPM,1995

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mazak #VTC200B, 44"X,20"Y,23"Z, Mazatrol 640MPC Fusion CNC, Cat 50, 24 ATC, 2000, #17727

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #VTC41L, 65"X,16"Y,20"Z, Cat 40, (2) 24 ATC, Mazatrol EIA, 1993

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Mikron #HSM600U, 5-axis, 32"X,24"Y,20"Z, 7 APC, 60 ATC, Heidenhain CNC, 2004, #18250

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Milltronics #VMD30, 70"X,30"Y,24"Z, Cat.40, 6K RPM,rigid tap, Centurion 6, 1997

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Monarch #VMC75, 40"X,20"Y,24"Z, 40 ATC, Cat 50, TSC, Fanuc 15M, 1996, #17935

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #MV-40B, 31.5"X,16.1"Y,20.1"Z,20 ATC,Mori Fanuc M4F CNC,1991,#17819

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Mori-Seiki #MV653/50, 60"X,26"Y,25.5"Z,2-APC,60 ATC,CTS,MSG-501,'01,#18835

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori seiki mv-jr, x-22", y-16", z-18", 20 atc,yanac mx-3 cnc, vises, tooling, 1991, #18899

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #NV5000A/50, 31.5"X,20"Y,29"Z, 30 ATC, 5-axis, MSG-501MB CNC, 2003, #17616

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

OKK #MCV-630, 50"X, 25"Y, 25"Z, BT-50, 30 ATC, Mitsubishi 300, 3500 RPM geared

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

OKK #VM5-II, 40"X, 20"Y, 20"Z, Cat 50, 13000 RPM, 40 HP, Neomatic 635, 2000

CNC MACHINERY & EQUIPMENT:MACHINING CENTERS, VERTICAL, CNC

CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, VERTICAL, CNC