LATHES, COMBINATION, CNC: Machinery & Equipment For Sale

CNC MACHINERY & EQUIPMENT:
LATHES, COMBINATION, CNC

Largest PreOwned Haas distributor in the US

There are 805 listings in this category
File update: Fri, Nov 20, 2009 01:24

SORTED BY EQUIPMENT LOCATION

Return to original sort
Advanced Search

ALABAMA

Hitachi-Seiki Hi-Tec #20SII, Seiki-Multi Control, Microcentric Collet, 3" Spindle

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hyundai #HIT-18S, CNC Turning Center, Siemens 840C, 17"Swing, 11" Hole, 1996

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Hyundai #HIT30S, 12" Chuck, 3.15" Bore, 20"sw, 39.37"cc, 3000 RPM, 30 HP,16 Sta.

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

32" x 120" LeBlond #3220X120 CNC Lathe, Delta 40 control, 4" hole, 18" chk.

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mazak Integrex #50Y, Turning & Milling Center 60" Universal, 28" Swing, 24" Chuck

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Mori-Seiki #SL-25/500, Turning Center, Moric 6TF, 1993

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Okuma #LT25, Twin Spindle Twin Turret Turning Center, 3500 RPM, OSP 7000L CNC, 99

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

Toolmex #TUR560-MN80, CNC lathe,22"x 80",Sinumeric control,steady rests,2001

Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Fax 205-664-9796) George Scott

ARIZONA

Haas #HL-2, 6000 RPM,8"chuck,2"bar,20"cc,auger,tool pre-setter,1998,ref #S6000080

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL-20, Auto Loader, 8"chk, 10" turn dia, 20HP, 4000RPM,2002,Ref.#S6000384

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Haas #SL-30T, 10" chk, live tooling,tail parts catcher,chip conv, 2006,Ref.#S6000382

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Hitachi-Seiki #HT-23J, tool presetter,chip conv.,tlstk,super clean,1998,#S5999644

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak Multiplex #6200, GL-100 ldr,chip conv.,(2)8"chks,8 rotary hds,1999,#S784898

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak #QT30, univ.,Maz.T-Plus,12"3-jaw chk,20"sw,chip conv,#4 MT,'8,#S6000031

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mazak Quick Turn #15N II, T-Plus control,tailstock,chip conveyor,1995,ref #S786831

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #CL25A, Fanuc control, 3000 RPM, 1998, Ref. #S6000325

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #CL-25B, Fanuc control, 2800 RPM, 1996, ref #s6000332

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #LL-7/3500, 42"swing,144"centers,24"chuck,750 RPM,60 HP,'01,#s6000067

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #SL-25MC, Fanuc ctrl,bar feeder,live tooling,chip conv,1996,#S5999754

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #SL35B, Fanuc control,chip conv,tailstock,new paint,1996,ref.#S6000330

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #SL35B, Fanuc control,chip conv,tailstock,new paint,1996,ref.#S6000329

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Mori-Seiki #SL35B, Fanuc control,chip conv,tailstock,new paint,1996,ref.#S6000328

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Okuma #LAW-R2ST, 18"chuck, 4-axis, OSP 5020L, conveyor, tools, 1993

High Technology Machines Inc, Tucson, AZ 520-818-9145 (Fax 520-818-9146) Russ Maynard

Supermax #YCM-TC-2, 2"bar,18"swing,21"centers,8"chuck,tailstock,1994,ref #S786628

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Topper #TA-25L, Fanuc 0iTC,10"chk,2.5"bar,20 HP,12 sta.trrt,chip conv,'07,#S786103

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

Topper #TNL-25, Fanuc 0iTC,10"chk,2.5"bar,tlstk,20 HP,chip conv.,2007,#S786104

K D Capital Equipment LLC, Scottsdale, AZ 480-922-1674 (Fax 480-922-1675) Michael/Sean

CALIFORNIA

Akira Seiki #SL-30, Fanuc OT, 8"chuck, 12 turret, 5C, chip, PC, tool set, 2004

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Binns & Berry Data #90, 33"x140",CNC engine lathe,windows base CNC ctrl,16"4-jaw manual chk,4 way turret type tool post,1991

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

Cincinnati #2216XIM Cinturn, Acramatic 950, 12 stations, 1988, #15322

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Femco #HL-25, Fanuc OT, SMW barfeed, parts catcher, 5C collet closer, 8"chuck

CNC Machine Sales, Orange, CA 805-279-0409 (Fax 805-672-0303) Ross Maehl

Femco #WNCL35/70, Fanuc OT,12"chk,chip conv,coolant sys,tlg, full enclose,1998

ACT Inc, Fullerton, CA 714-441-1992 (Fax 714-441-1923) Randy Goodman

Haas #HL-1, loaded with options, 1998

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-2, priced right, clean, 1995

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-4, very good condition, 1997

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #HL-6, gear box, loaded with options, 1997

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-20, 2"bar cap, 24"btwn centers, 10"turning diameter, 2002, #28474

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Haas #SL-20T, like new condition, 10 spindle hours, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30BB Big Bore, (2) 18"chucks, tooling, priced right, 2004

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30T, gear box, loaded with options, 2002

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Haas #SL-30T, 30"swing, 10"Kitagawa B210 3-jaw chuck,chip conveyor,2006,#28473

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Haas #SL-40BB Big Bore, (2) 18"chucks, tooling, loaded, low hours, 2005

Universal Machinery Sales, Camarillo, CA 805-445-9033 (Fax 805-445-9964) John Wilder

Hardinge #AHC, Omniturn CNC control,gang style tooling,5C collet nose

CNC Machine Sales, Orange, CA 805-279-0409 (Fax 805-672-0303) Ross Maehl

Hardinge Conquest #T51, Fanuc 0T-C,3-axis,26"x23",4200rpm,8"chk,2"bar,chip,'94

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Hitachi Seiki Super 250, Seicos 16 control, 10"chuck, 2001, #52736

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Hwacheon Hi-Tech #200, Renishaw presetter,8"chk,tooling,Fanuc 0iTB,like new,2006

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Ikegai #TCR25, Fanuc 10T,3-axis,X-250mm,Y-400mm,3150 RPM,live tooling,1987

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Kia Turn #SKT15LMS, live tool,6"chuck,sub-spdl,LNS Servo bar feed,1.75"bar,2002

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Leadwell #T7, w/Fedek DH65 feed, Fanuc 0I, 2004 (2987)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Leadwell #T7, w/Fedek DH65 bar feed, Fanuc 0I, 2004 (2988)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Mazak #M5, 2500 Mits.ctrl,24"x 96",6.5"bore,19.5"chuck,steady rest,#26891

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #M5-1500, Maz T-Plus,combination lathe,15"chuck,chip conveyor,#28132

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #QT15N II, Maz.T-Plus, lathe, 8"chuck, tool preset, 1995, #27875

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Mazak #QT-20HP, CNC Lathe, 1998, #52861

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mazak #QT-6G, CNC Lathe, EIA-Dash control, 1996, #49789

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mazak Quick Slant #30, Cam T-4 control, 4-axis, 10"chuck, chip conv., 1986

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Mazak #SQT18, 10"chuck, 12-turret, tailstock, tool set, conveyor, nice, 1993

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Metosa, GE Fanuc Oi-TC CNC Control, Metosa Smart 225 (2957)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

Mori-Seiki #LL-7, 43"swing x 100"cc,retro Fanuc 10T,50 HP,chucks,twin tl turrets

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Mori-Seiki #SL15, Fanuc 10T,17.7"x23.4",12 tls.VDI,6"3jaw,2"hole,6k RPM,chip,'89

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Mori-Seiki #SL15, 17.72"sw.over bed, 11.81"sw/slide, 24.02"cc, 12 sta.tur., excellent

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Mori-Seiki #SL-15, Yasnac LX-3 control, 6"chuck, 12 station turret, tailstock, 4500 RPM

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Mori-Seiki #SL-25B/500, Yasnac LX3,20.5"x24.6",3500 RPM,10 tls,25hp,pts cthr,'91

Dorsey-Warford Inc, Anaheim, CA 714-632-8300 (Fax 714-632-8399) Gary Warford

Mori-Seiki #SL303B700, CNC lathe, 12"chuck, Fanuc 18T, 2002, #52519

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Mori-Seiki #SL5, CNC lathe, Yasnac control

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Mori-Seiki #ZT1500Y, CNC turning center,MSG-501 control,2004,#52192

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Nakamura #TMC4, CNC combination lathe, 12"chuck

Arpi Machine Sales, Sun Valley, CA 818-298-9685 (Fax 818-780-4969) Robert Alajajyan

Nakamura Tome #TMC35, Fanuc 11T, 12"chuck, 3"bar cap, 20 HP, 40"ctrs, cc, 1994

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma Cadet #LC8, OSP 5020L ctrl,15.75"swing,19.69"cc,12 sta.tur,8"chk,barfd,1996

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Okuma Cadet #LNC-8, barfeed, 1994

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Okuma #L1420BB/1250, CNC lathe,chip conveyor,15"chuck,tailstock,1996,#52387

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Okuma #LC-20, 4-axis Simulturn,OSP5000L-G,hyd.LNS cllt chk,tlstk,chip,1985

TNT Industrial, Huntington Beach, CA 714-612-1480 (Fax 714-242-1565) Jim Thinnsen

Okuma #LC40-1SC, OSP 5000L, 15"chuck, 23.62"sw, 15.75"centers, 1985, #73921

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Okuma #LC-50-2ST/750, OSP 7000, 32"chuck, chip conveyor, 1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LCC-15-2S, OSP-700L,ganty ldr,4200rpm,8"chk,(2)12 sta.trrts,'99,#26347

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LCC15-2S, combination lathe, twin turrets, chip conv, clean, 1998

Ryan Machine Co, Aptos, CA 408-315-3497 (Fax 831-687-0915) Pat Ryan

Okuma #LFS-15-2SP, OSP-U100L,dual spdl,stocker/ldr,8"chk,12 tool trrt,1999

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LNC-8C Big Bore, 10"chk,12 turret,chip conv.,tailstock,bar feed,nice,1994

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Okuma #LU15, OSP-700L, 8"chuck, dual turrets, chip conveyor, 1996, #25628

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Okuma #LU-15BB-2ST/350, OSP 7000, 4-axis, 10"chuck, chip conveyor, 1999

Proline Machinery Co, Chatsworth, CA 818-882-0075 (Fax 818-882-0076) Jay Charness

Okuma #LU-15MW, OSP-1000, C-axis, sub-spindle, 2.75"bore, 1999, #26717

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Takisawa #EX-106, Fanuc 21i control, 6"chuck, 1.63"hole, 2006, #73774

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Takisawa #EX-106, Fanuc 21i control, 6"chuck, 1.63"hole, 2006, #73776

Machinery Resources Intl, Woodland Hills, CA 818-346-7985 (Fax 818-346-7986) Sales Dept.

Takisawa #EX-108, Fanuc 21T, 8"chuck, 12 turret, tailstock, super, 2003

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

Takisawa #TC20, 8"chuck, 8 sta.turret, Fanuc 21T, tailstock, 1998

PM Machines, Huntington Beach, CA 714-892-9800 (Fax 714-892-9003) Steve Mataviesko

Toyoda #600HES, 24"x64",Fanuc GN10,program.hyd.tlstk,15"3-jaw,40 HP,1987,#5528

Sterling Machinery Exchange, South El Monte, CA 626-478-1008 (Fax 626-443-9588) Adam Mattes

Wasino #G07F, Fanuc 21, robot gantry loader, 2"bar cap, 10 HP, 2006, #27444

Machinery Network Inc, Encino, CA 310-826-4440 (Fax 310-826-2320) G. Treisman

Wasino Lenuc J, Fanuc 6T control (2990)

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Fax 805-525-5683) Al Van Wagner

YCM #GT-200B, 8"chuck, 10 turret, PC, chip, tailstock, Fanuc, super, 2007

Performance Machine Tools, Fremont, CA 510-249-1000 (Fax 510-249-9265) Robert Kroha

COLORADO

Clausing Storm #200B, CNC lathe, GE Fanuc 0T, 10"chuck, 2-1/2", 1994

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Daewoo Puma #2000SY, Fanuc 18T, 3", LNS QL Servo 3 loader, Y-axis, 2005

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Doosan #MX2000ST, Fanuc 15I-TB, 2-1/2", Combination Lathe, 2008

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Eurotech Force #8(ZPS-S50), lathe,Fanuc 21iT,12 sta.trrt,2-axis,LNS HYS BF,'01

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Ikegai #TC26K, CNC lathe, Fanuc 18iT, gang tool, 4000 RPM, chip conveyor, 2005

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Kuma #LC30, OSP 3000 w/CRT, Combination Lathe, 12"chk, 1983

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Leadwell #GTC20, Fanuc OT, barfeed, 15 HP, 1993

Machine Mart, Denver, CO 303-853-8665 (Fax 303-853-0301) Sales

Leadwell #LTC10AP, Fanuc OT,6"3-jaw,tailstock,12 sta,4500 RPM,chip conv,1995

Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Fax 303-795-7599) Frank Dieveney

Miyano #BNC-34A, CNC lathe, Fanuc 0T, 1-5/16", 6-position turret, 1988

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Miyano #BNC34C, CNC lathe, Fanuc 0T, 1-5/16", 5C collet chuck, tailstock, 1992

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Miyano #BNE34S3, 1-3/8",CNC lathe,Fanuc,(2) turrets,sub-spdl.,live tooling,1999

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mori-Seiki #DL150Y, CNC lathe, MSCV 518, 1-3/4", 16.5"swing, live tools, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Mori-Seiki #ZT1500Y, CNC lathe, sub-spdl.,live tooling,Fanuc,8-axes,Y-axis,LNS B/F

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Okuma Cadet #LNC8, CNC lathe, OSP700, 8"chuck, 2", tailstock, 1996

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Okuma Captain #L370BB, E100L, CNC Lathe, 2001

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

Okuma #LT-10, OSP 100L, twin spindle & turret, LNS Servo S2, 1998

Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Fax303-651-6556) Steve/ James

CONNECTICUT

Gildemeister #GMX200 Linear, CNC lathe w/tool changer, 2005

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Fax 860-654-0548) Brad

Heyligenstaedt, 28.3" x 160"cc, 18.7"OCS, 75 HP, CNC, under power

American Machinery Co Inc, Newtown, CT 203-335-1153 (Fax 203-426-2747) Bill Buckens

Miyano #BNE34,1-5/16" bar,Iemca Boss bar ldr,18T CNC,multi-axis live tlg,5000RPM,'92

Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Fax 860-388-2740) Ray Magaldi

Miyano #BNE51,2"gar,6"chk,Twin Spdl,Miyano CNC,chip conv,4000RPM,live tlg,1998

Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Fax 860-388-2740) Ray Magaldi

Monarch Predator,2"bar,multi-axis lv.tlg,15"X,23"Y,25"Z,5000RPM,Fanuc 18T,LNS BF,'96

Industrial Resources Inc, Old Saybrook, CT 860-388-3439 (Fax 860-388-2740) Ray Magaldi

Mori-Seiki #MU45/40, CNC turning center,32"x 20"x 24"tbl.trvl,under 10K hrs.

Global Machine Brokers LLC, Thomaston, CT 860-484-4449 (Fax 860-484-4452) Joseph Wihbey

Okuma Impact #LU15, 4-axis CNC Lathe, OSP 7000 control

GreasyMachines.com, Bristol, CT 866-473-2796 (Fax 860-585-9072) Nick/ George

FLORIDA

Mazak #QTN250MS, 4k RPM,3"bar cap,10"chk,Maz Matrix ctrl,213 psi tsc,chip,'07

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak #SL40N, 18" chk, T-Plus, 4" bore, 21" SW, Z-Axis 41", 40 HP, GL400

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mazak #SQT-250MSY, 2.5"bar cap,live tools,Y-axis turret,sub spindle,tooling,2000

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Mori-Seiki #CL15, MSC603,6k RPM,12 pos.trrt,chip conv,tool eye,6"chuck,1997

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #NL2500SY, 10.2"x31.3"x3.9",HS1-4k RPM,10"chk,HS2-6k RPM,6"chk,12 trrt

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #SL35, 3"bar, 23"sw, 35"cc, tailstock, 12"chuck, chip conv., 1996

ReSell CNC, Longwood, FL 407-478-8181 (Fax 407-478-8181) John/ Curt

Mori-Seiki #ZL203SMC, LNS mag,chip conv,part conv&catcher,live&sub,C-axis,2004

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Nakamura Tome #WT300MMY-BB, Y-axis turret,sub,C-axis,4"bar cap,500 hrs,loaded,'07

Universal Automatics Inc, Fort Lauderdale, FL 954-202-0063 (Fax 954-202-0170) Chris Steiner

Okuma #LB-15, OSP5000L control,8"3-jaw,tailstock,conveyor,1-7/8"bore,1985

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

Sharp #SLT100, Fanuc 01-Mate,10"3-jaw conveyor,2.95"bore,15 HP,bax ways,2004

A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Fax 305-883-0660) Sales Dept.

ILLINOIS

Akebono #MINC35XL, platten/gang type CNC,Fanuc OT ctrl,mill.attach & Sameca long CNC bar feed

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Ameri-Seiki #TL-6XL, Fanuc OT,12 station turret,18"chuck,coolant,1998

Morris Rezman Machinery Co, Chicago, IL 312-829-2510 (Fax 312-829-1281) Jeff Rezman

Bridgeport Romi EZ Path II, Teach mode,20"sw.x 40"cc,10"chk,3500 RPM,10 HP,1996

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Bridgeport Romi Powerpath 15, 8"hyd.chuck,3000rpm,12 sta.tur,CX32-CNC,1996

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Chevalier #FCL-1840, CNC lathe,18",flat bed,drum turret,conversational,tools,2006

Quest Machinery Company, Elburn, IL 815-544-9032 (Fax 866-628-1858) Jeff Foster

Chin Hung #CL10, Platten/gang type CNC,Fanuc OT ctrl,320mm sw.o/bed,250mm Z,480mm X,100mm x 100mm nom.work size

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Cincinnati #20/12, 72"universal 4-axis,steady rest,tlstk,Acra 5,12"pwr.chk,1976

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Cincinnati Milacron Falcon 200, 20.86"sw.,9.84"max.cut,16.5"cc,40-4500rpm,15hp,'97

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Cincinnati Falcon #300T, CNC lathe,26"x68",12"chuck,Acramatic 2100,1996,#s27065

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Hawk #TC-250, 21"x 27",Acramatic 2100E CNC,2.8"HIS,1998,#s27339

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Cincinnati Talon #210, Acramatic 850SX CNC,chip conveyor,tool presetter,1992,#15357

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Clausing Colchester Storm 80, Fanuc 21T,tailstock,6000 RPM,3-axis,1997,#1810

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

CMZ #TBI-450, 8"chuck, 24"cc, tailstock, Fanuc OT

Alenco Tool Supply, Chicago, IL 773-725-5700 (Fax 773-7250296) Paul Braeseke

Daewoo Puma #200, 2-axis turning center,45-4500 RPM,3"bore,20 HP,10 station turret,9.5"X,17.3"Z,10"3-jaw chk,Fanuc 18T,1998

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Daewoo Puma #200MS, Fanuc 18T, 20.1" sw, 6000 RPM, all spdls, parts catcher, 1998

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Daewoo Puma #230MB, CNC Lathe, Fanuc 21iTB,21.7"sw,12 sta.tur,4500 RPM,20 HP,'00

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Daewoo Puma #8HC

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Daewoo Lynx #200A, CNC Lathe, Fanuc 21iTB, 18.1"sw, 6000 RPM, 1.75"bar cap,'98

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Daewoo Puma #V10, vert,15.7"swing,10"chuck,15.7"X,11.8"Z,Fanuc OT,25 HP,1997(6)

Lindoco Machinery, Morton, IL 309-256-1065 (Fax 309-263-1209) John McEllin

DMG #CTV 250 (2 Available)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

DMG #CTX310, S810D,19.9"sw,18"centers,5k RPM,4500 RPM rotary,chip conv,'08

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Doosan #1500SY, CNC Lathe, 23.6"sw, 1.75"bar cap, 6000 RPM, 12 sta.tur, Y-axis

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Doosan Puma #2000Y, 23"x20"milling,Y-axis,3"bore,tailstock,chip conveyor,2006

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Doosan Puma #600L, 21iTB,21"chk,6"bore,40"sw,120 BC,1800 RPM,12 trt,60 HP,chip,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan Puma #600LM, 840DE,24"chk,5.9"bore,40"sw,126"bc,1800rpm,12trt,60hp,2009

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan Puma #700,21IT,24"chk,7"bore,40"sw,68"bc,1500rpm,12trt,tool eye,chip,'06

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Doosan #QL300H, 10",Twin Spdl,Fanuc 18I-T, (2)10" chks,3500 RPM,full gantry,2006

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Dugard Eagle 10 (Feeler), CNC lathe, Fanuc 0-TD,240mm max.turning dia,140mm X,290mm Z,Hydrafeed Multifeed ML1 short mag.brfd

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Dugard Eagle 20 (Feeler), CNC lathe, Fanuc 0-TD, 350mm max.turning dia,200mm X,600mm Z,12 station tur,tool setting arm,tlstk.

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Emco Maier #340, 13.3"swing,30"cc,1.65"bar,Siemens 810 CNC,cheap,(2)avail.,#S25606

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Emco Maier PC #Turn50, from school, 1996, stock #10622

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Fuji #Fan, Fanuc OT,8"chk,gang style tooling,10 HP,15"X,13"Y,vert.tool slide,1994

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Giddings & Lewis #40C, 22.5" x 33", Fanuc 15T & 10T, 3.5"hole, 40 HP, 1991

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Gildemeister #CTX-510, Fanuc 32, 10"chuck, 41"cc, milling, 3"bar, 2005

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Gildemeister #GAC-65, Lathe, 2.56"bar cap., 8-axis, Iemca feed, 1994, #S26655

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Gildemeister #NEF600, Fanuc,10"chk,3.5"bar,21.7"sw,47.2"BC,3000 RPM,8 trrt,'06

Y. Franke & Company, LLC, Schaumburg, IL 847-987-1607 (Fax 847-310-9275) York Franke

Graziano Twin 70Y, lathe,2.5"bar,5k RPM,(2) 12 sta,live tls,Fanuc 18iT,C&Y-axis,'01

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Haas #SL30, 10"chuck, 34"centers, 3.03"spindle bore, 30 HP, Haas CNC, 2004

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Haas #SL-40, combination lathe, 7"bore, 44"center, 55 HP, 2006

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Haas #SL40L, lathe,18"chuck,89"cc,4"thru hole,55 HP,steady,Haas CNC,2006

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Haas #TL-15, CNC turning lathe, 23.5"sw, rigid tapping, 4000 RPM, 20 HP, 2008

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Hardinge Cobra 42, 8"max.dia.,21"swing,14"length,Fanuc 21T,chuck,collets,tooling

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Hardinge Cobra 42, Fanuc 21T, 16C collet nose, 12-position turret, 6k RPM

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Hardinge Conquest 42, 19.5"sw,17.5"cc,5000 RPM,10 HP,Fanuc OTB,16C collet,'92

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hardinge Conquest #T42, Fanuc 18T,6"chuck,milling,sub-spindle,tooling,1997

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hardinge Conquest #T51-SP, CNC lathe,10"x 23",2.5",HIS,8"2-jaw,Fanuc OT,'94,#s27738

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Harrison Alpha #1400S, CNC/Teach Lathe, 10" chk, 50" cc, very nice, 2004

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Harrison Alpha 550T, 21.9"swing,32.6"gap,80"cc,4"bore,15 HP,12"/15"chucks,2002

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Hessapp #DVH450 Vertical, lathe,17.7"sw,50 HP,Indramat CNC,in plant,1998,#S25617

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hitachi-Seiki #CS20, Seicos 21L,8.25"chuck,2",51"X,3.75"Z,30-50000 RPM,2000

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Hitachi-Seiki #CS20, inverted spindle,2.3"bore,30-5000 RPM,Seicos 21L,13.8"x 6",2000

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hitachi-Seiki #CS20, Fanuc 21iTA,10"chk,2",51"X,3.75"Z,30-50k RPM,westch cnvyr,'99

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Hitachi-Seiki HiCell #20, C-axis,Y-axis,12 ATC,8"chk,Seicos L,chip conv,1995

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki #HT23SII, 10"chk,10 sta.trrt,prog.tailstock,chip conv.,20 HP,1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hitachi-Seiki #TF25, 10"chk,40"cc,Seikos 10L Multi CNC,10 sta.trrt,25 HP,'97 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hwacheon Hi-Eco #10E, Fanuc 0T, 7"3-jaw, turret, tailstock, 15 HP, 6000 RPM, 2000 (2)

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Hwacheon Hi-Eco #31A, 2-axis CNC turning,30-3200 RPM,3.1"bore,10 station turret,9.9"X,26"Z,10"3-jaw chk,Fanuc OTC,1996

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Hyundai #HIT18S,17"x 25",10"chk,3.15"HIS,36-3600 RPM,Sinumerik CNC,1998,#s27527

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Hyundai #HIT-20M, C-axis,live tooling,10"chuck,chip conv.,Siemens,25 HP,1999

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Hyundai #QT28N, 12.5"max.turning x 40"cc,20"swing,3"hole,3000 RPM,30 HP,1996

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Hyundai Quick-Turn #8N, CNC lathe,6"chk,12"cc,6k RPM,15 HP,Mazatrol T-32B,'95

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Index #ABC, Werke Swiss type CNC lathe, 1996

Graff-Pinkert & Co, Oak Forest, IL 708-535-2200 (Fax 708-535-0103) Lloyd/ James

Index #G200, Swiss type CNC lathe, 1996

Graff-Pinkert & Co, Oak Forest, IL 708-535-2200 (Fax 708-535-0103) Lloyd/ James

Index #V200, Siemens control (2 available)

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Jones & Lamson #TNC1036, 37"x 54",10.6"HIS,33"chuck,Fanuc 18T,in plant,#L27926

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Kia #Kit 30A, CNC combination lathe, gang type, Yasnac LX3, 1995

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Kia #Kit 30B, Fanuc 0i-TA, 6.5"chuck,1.81"hole,15.75"X,9.84"Z,30-6k RPM,2001

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Kitako #MT4-170, CNC chucker

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Dual Turn #20, Fusion,12.6"swing,4750 RPM,2 x 10"chucks,chip conv,2004

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak Dual Turn #20, T-Plus,(2)8"chk,2.4"bore,(2)4k RPM,(2)12 trt,(2)eyes,chip,'92

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Dualturn #20N, T-Plus,(2)8"chks,2.4"bore,(2)4k RPM,(2)12 trt,2 eyes,chip,'97

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Dualturn #20R, 640PRO,(2)8"chucks,3"bore,(2)4k RPM,(2)12 trrt,(2)30 HP,'06

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Dualturn #20R, 640PRO,(2)8"chucks,3"bore,(2)4k RPM,(2)12 trrt,(2)30 HP,'05

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #E650HS2/3000U, Matrix,(2)18"chks,6.69"bore,(2)1600 RPM,60 HP,80 ATC,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex 300IISYM CNC Millturn center w/sub-spdl,40ATC,24.8"X,9.1"Y,44.4"Z,C-axis,10"3-jaw,Mazatrol 640MT PC Fusion,'01

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Mazak Integrex #30Y/1500, T-Plus,12"chk,3.46"bore,20"sw,60"bc,3500rpm,40atc,'97

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Integrex #400II-Y/1000, Y-axis CNC lathe,Mazatrol Fusion 640,3k RPM,2001

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mazak Integrex #50YB/2000, 640T,15"chk,3.4"bore,2500/4000 RPM,40/20 HP,2001

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #M4-1500u, 2-axis flat bed lathe,22"swing,60"cc,13-2200 RPM,3.125"bore,2 turrets,12"3-jaw chk,Mazatrol T32-2 CNC,1993

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Mazak #M5/2000, 10T,12"chk,4"bore,24"sw,102"BC,8/6 trrt,2200 RPM,2-steadies,1986

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #M5N/2500, 640T,20"chk,7.1"bore,24"sw,100"BC,1k RPM,6/8 trrt,eye,chip,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Multiplex #20, Twin Spdl,4-axis,10"x 46",8"chk,Renishaw probe,T32-4 CNC,'90

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Multiplex #420, T-Plus,8"/8",2.4"bore,5000/5000 RPM,12/12 trrt,chip,1995

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Multiplex #420 twin spdl, 4-axis,10"x46",8"chks,Renishaw probe,T32-4 CNC,'90

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak Multiplex 610, 6.29"turning, 13.77"swing x 5.11"cutting length, 1991

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mazak Nexus #QTN250M, 10"chuck,3"bar,24"swing,35 HP,live milling,barfeeder,2006

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Mazak #PMU3000, fusion, 34" sw,122"centers, 10.2" bore, 750 RPM, steady rest, 2000

Machinery Systems Inc., Schaumburg, IL 847-490-2119 (Fax 847-490-8967) CNC Division

Mazak #QT12C lathe, Flex GL-50C robot, 15.75"swing, 4000 RPM, 1994

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Mazak #QT15N, CNC lathe, 17"x 20", 8"chuck, Mazatrol T32-2, 1992, #s27045

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #QT18N lathe, T-32B CNC,10"chk,chip conveyor,parts catcher,20 HP,1994

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak #QT20HP, T-Plus,10"chk,3"bore,20"sw,20"bc,4000rpm,8 trrt,SMW bar fd,1996

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #QT300L, Combination CNC Lathe

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #QT350, 26"x 48",12"chuck,4.4"hole in spindle,PC Fusion 640T,2002,#s27361

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #QTN250, 640T,10"chk,3.4"bore,26"sw,22"bc,4000rpm,12 trt,eye,chip,2006

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak Quick Slant #20U, 4-axis, Mazatrol T-4, LNS bar feed, 1986

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak Quickturn #18N, 2-axis CNC turning,3600 RPM,3.15"bore,8 sta.trrt,7"X,20"Z,10"3-jaw,LNS Hydrobar fdr,Mazatrol T32-2,'92

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Mazak Quick Turn #20 , 8"chk,20"centers,5k RPM,20 HP,Mazak Mazatrol T-Plus,'97

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Mazak Quick Turn #25, slant bed, 30 HP, Mazatrol CAM T2, chip conveyor, 1988, #15368

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mazak Slant #50N/2000,T-Plus,21"chk7.1"bore,32"sw,81"bc,1500rpm,15trt,eye,chip,'98

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #SQT-10M, live milling, C-axis, 6" chk, parts catch, barfd, Mazatrol T-plus

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Mazak #SQT15, T32,2.4"bore,20"sw,23"bc,5000 RPM,12 turret,25 HP,chip,1993

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #SQT200, lathe,20.7"x21",8"hyd.chk,2.4"HIS,5k RPM,Fusion 640T,'01,#s27219

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mazak #SQT250MS, 640T,10"/6"chk,4k RPM/6k RPM,35 HP/10 HP,12 trrt,.001 C-axis,'04

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mazak #ST40N, Lathe, 21.6"x 60", 3.5"bore, Cam T-2 CNC, in plant, #S26918

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mighty Viper #VT4A, Fanuc 18iTB CNC, 2100 RPM, 18"chuck, 2006

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mighty Viper #VT-25B, 20"x 28", 3"bar, Fanuc 18T, tool eye, 12 position, 2000

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Milltronics #ML14, 14"sw.x 40"cc,Centurian V CNC,8"chuck,2000 RPM,5 HP,1997

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mitsubishi #M-TC15, Lathe, 20"x 41",chip conv,tailstk,Meldas CNC,1993,#s27573

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Miyano #LE-22, lathe,2"bar,4k RPM,live tls,Microcentric,parts catcher,TS,Fanuc OT

Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Fax 847-265-1078) Jerry Ditter

Miyano #LP21, Combination Lathe, chucking center, Fanuc 18-TB, #82551

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #AL-20, Fanuc OT Mate,8"chuck,19.7"cc,chip conveyor,1990 (2)

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #AL-20BTM, 18.9"swing,9.8"max.turn,19.7"cc,40-350 RPM,10 HP,2.2"hole,'90

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Mori #DL151Y, Fanuc 18TT, 6"chucks, Y-axis, twin spindle, live, loaded, 2000

Used Solutions Inc, McHenry, IL 815-759-5000 (Fax 815-759-5004) Mark Mammen

Mori-Seiki #LL7B/3500, 16T,24"chk,8.4"bore,42"sw,144"bc,750rpm,4/6 trrt,steady,'01

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #MT253S/1000, Fanuc 18T,10"main,8"sub,60 ATC,3.46"bore,2002

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Mori-Seiki #Nl2500/700, MSX501,10"chk,3.4"bore,36"sw,29"bc,12 trrt,4k RPM,APC,'05

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #NT3150/DCG100SZ, MSX711T3,(2)8"chuck,(2)6k RPM,CCAPTO40 ATC,2007

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SL-150SMC, Fanuc MSC-518, 12 sta.live tur,5000 RPM,brfd,26.8"sw,'97

520 Machinery Sales LLC, Elk Grove Village, IL 888-5201768 (Fax 630-8553535) Everett Dahlberg

Mori-Seiki #SL303, 28"x 64", 10"chuck, 3.4"bore, Fanuc MSG501, 2002, #s27025

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL35MC, 24"x 35",12"chk,C-axis,live tooling,Fanuc 15TF,1989,#S26986

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL403C/800, MSG501,24"chk,6.6"bore,36"sw,44"bc,1500rpm,12 trrt,eye,'01

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SL-4B, 22"x 24",2500 RPM,3"bore,12"hyd chuck,Fanuc 6TB,#s27992

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL603B/2000,MSX500III,21"ck,7.3"bore,40"sw,90"bc,1500rpm,12trt,chip,'08

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SL75B, 18T,24"chk,6.6"bore,35"sw,69"bc,1020rpm,12trt,chip blaster,'99

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #SL80A, 39.4"swing, 4.9"HIS, 33"index chuck, MF-T5, 1993, #S27907

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Mori-Seiki #SL8F, combination lathe,51.1"swing,8.5"bore,143 RPM,40 HP,32"man.chuck,6-tur.pos,1985

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Mori-Seiki #VL55, 20",Fanuc 18T,12 position turret,2000 RPM,40 HP,1998

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #ZL250B/600, 2 turrets,tailstock,15.35"max.turn dia.,MSC-501T CNC,1998

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Mori-Seiki #ZL253BMC/600, MSG501,Mapps,10"chk,3.4"bore,26"bc,3500rpm,10/8 trrt.

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Mori-Seiki #ZL25B/500, 4-axis, Fanuc 15TT, 20.5"CNC ctrl, 10 sta.turret, 10"chuck, #15492

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Mori-Seiki #ZL-25B1000, 20.47"x40.55"cap.,4-axis,Z trrts,3.15"hole,3500 RPM,1988

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Motch #125-VNC, vertical,24"swing,22"chuck,Fanuc 18T,rebuilt 1997,in plant,#s27711

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Motch #225VNC, vert.,2-spindle,24"swing,22"chucks,Fanuc 18T,in plant,1980,#s27713

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Nakamura-Tome #TMC-20, CNC lathe, Nakamura Fanuc Ctrl,137mm X,315mm Z,8 station turret,tool setting arm,tailstock

Apex Auctions, Warrenville, IL 630-717-3720 (Fax 630-717-3727) Jeff Kopp

Nakamura Tome #TMC-300C, 10"chuck, 3.3"bore, 12 turret, Fanuc 16T, 1994

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

Okuma #L1420/1250, 700L,15"chk,3"bore,24"sw,49"bc,3500rpm,12 trrt,steady,chip,1997

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Okuma #L370BB, OSP100, 10"chuck, 3.15"bore, 2006

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #L370SB, Combination Lathe, OSP 200L, MTA Bar Feed, Chip, 2008

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LB-15 II BB-1000 lathe, OSP-7000L CNC ctrl,full C-axis,0.001°,3500 RPM,20 HP main spindle,12 station,1996

Edge Machine Tools, Saint Charles, IL 630-444-7344 (Fax 630-444-7445) Bob Drewes

Okuma #LB25, 18"x 25",OSP 5020lG,15"-2jaw chuck,3.54"bore,65-3500 RPM,1990 (2)

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Okuma #LB25II-M, live tooling,60-3500 RPM,3.15"bore,20 HP,C-axis,11.8"X,26.6"Z,12"3-jaw chk,OSP700L CNC,chip conveyor,new

Premier Asset Recovery Group LLC, Prospect Heights, IL 312-280-1234 (Fax 312-280-1266) Glenn Gray

Okuma #LC20-2SC, 15.75"sw,18"turn.lgth,4-axis 8 & 12 pos.tur,3500rpm,'88,Stk#9573

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Okuma #LC20-2SC, combination lathe, 15.75"swing, OSP5000L, 3500 RPM, rebuilt in 1999 by Okuma

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma #LC20-2SC, OSP 5000L,4-axis Simulturn,chip convyr,tlg,'90,Okuma reblt.'98

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Fax847-276-2762) Peter Sonneborn

Okuma #LC30-2S, 4-axis,12"chuck,12/8 sta.turrets,3"hole,40 HP,OSP5020l,1989

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Fax 847-803-8701) Brian Johnston

Okuma #LC40, 15"chuck, OSP3000, mint, stock #10566

Altman Machinery Co, Chicago, IL 773-247-4343 (Fax773-247-2666) Howard /Steve

Okuma #LC40 CNC, OSP 3000, 4-axis, twin turret, 23.6"swing, 21.6"length, 1982

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Fax 847-580-6801) Jerry/ Ryan

Okuma #LFS15, Lathe, 28.3"swing, OSP-700L CNC, 8"chuck, robot load, #S27099

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Okuma #LR-15, OSP5000L, 4-axis, chucker, chip, BFI, 1989

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LR25, 4-axis, OSP5020L, 12"3-jaw, tailstock, color control, excel, 1989

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

Okuma #LR25, 4-axis, 20"swing, OSP 5020L-G, 3500 RPM, 3.54"HIS

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Okuma #LT-25M, OSP100, 7-axis, chip, 2001

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Okuma #LU25M-2SC/650, OSP 7000L,16.80"turn dia,25.59"turning lgth,1996,#61259

BlueStar Machinery, Johnsburg, IL 847-497-9800 (Fax 847-497-9801) Sean Johnson

Okuma Macturn #30W, E100l,2-collet chks,2.4"bore,(2) 5k RPM,30/20 HP,KM63,2001

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Okuma-Howa #ACT-2SP-2, lathe,8.3"x 14.2",twin spindle,Fanuc O-T,1992,#s27578

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Saginaw #AC-450, vert.twin spdl,22"swing,15"chks (2),Fanuc 15T,in plant,'92,#s26753

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Takamaz #XD-10I, (2)6"3-jaw chucks,twin spdl.opposed,10 station servo turret,1999

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

Takisawa #TS-10, 3-axis, 6"chuck, 1.37"bar cap., Fanuc 10TF CNC, live tooling

Asset Exchange Corporation, Chicago, IL 773-866-9600 (Fax 773-866-9601) Gregg

TMX28"CNC, Fanuc 0iT,28"x117",full CNC series,15 HP,Tri-V bed,Taiwan,2008

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

Tongil #TNL-120V, 62"swing,Fanuc 18-TC,40"hyd.chuck,Servo,2005,#4049

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Tongil #TNL-20, Tongil TEPS,5"chk,11"swing,.98"bar,gang style turret,1985,#4250

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Tongil #TNL-80V2, Fanuc 0i-T,20"hyd.chucks,31"swing,foot switch,2005,#4048

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Topper #TA20, OITC,8"chuck,2.4"bore,18"swing,17",4500 RPM,12 trrt,chip,2005

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Topper #TA25l, OITC,10"chuck,3"bore,18"swing,25",3500 RPM,12 trrt,chip,2007

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

TUR630MN, Fanuc 21iT,man.CNC,25x157",20 HP,Sauter 8 trt,TRI-V bed,2008

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

TUR630MN, Siemens 840,man CNC,25"x78",20 HP,TRI-V bed,European,2008

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

TUR630MN/CNC,25x118",4"bore,top European quality,25hp,TRI-V,Fanuc 21iT+man.guide

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

TUR930MN, Fanuc 21iT,12.5"bore,37"x118"Oil Country,37"x118"BC,Tri-V,European,'08

Toolmex Corp, Schaumburg, IL 847-301-3700 (Fax 847-301-3703) Tom Kob

W & S #2SC18, Fanuc 15T,18"chk,5"bore,24"swing,20"BC,1015rpm,12 turret,chip,'93

Used CNC Inc., Huntley, IL 847-669-9780 (Fax 847-669-9781) Mike/ Mitch

Warner & Swasey #3SC, 40"swing,24"chuck,Fanuc 18i,rebuilt 2002,(2),#L27908

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Warner & Swasey #SC-15, 15"3-jaw,chip conv,clnt,CNC upgrade,under power,excellent,1975

Production Machinery Co Inc, Rockford, IL 815-962-0937 (Fax 815-962-0953) Steve Hall

W & S #SC-28, 28"/34"swing,41"cc,24"chuck,6.25"HIS,Fanuc GN11,1989,#S26693

Perfection Machinery Sales, Elk Grove Village, IL 866-314-4971 (Fax 847-427-8884) Sales Dept.

Wasino #LG6, Fanuc OI-TA,7.5"chuck,1.5"bar,15.75"swing,2.4"turn.dia,5k RPM,1991

Adams Machinery Co, Lincolnwood, IL 847-673-0556 (Fax 847-673-7636) Sonneborn

Wasino #LJ-3B, Fanuc OT, 5C collet chuck, tailstock, 10 HP, 1990

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Fax 847-635-8976) Jack Boecher

Wasino #SS8 Cell, Fanuc 0-TT, 6"hydraulic chuck, Flex 1 robot, 1998

Machinery Management LLC, South Elgin, IL 847-608-9300 (Fax 847-608-9301) Tom Hazelhurst

Yang #ML28A, 21.65"swing,11"max.turning,23.62"centers,3.8"bore,3500 RPM,1998 (2)

Gray Machinery Company, Prospect Heights, IL 847-537-7700 (Fax 847-537-9307) Sales Dept.

INDIANA

Miyano #LE22B, 2-axis lathe,12 sta.,live tooling,C-axis,BF,Fanuc 18T,1996 (2)

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

Mori-Seiki #SL15, 2-axis lathe,12 sta.,TS,6000 RPM,chip,MF-T6 control,1994

Jordan Machinery Co Inc, Greenwood, IN 317-882-1478 (Fax 317-887-1487) Jim Jordan

IOWA

Bridgeport Romi EZ-Path, 16"x 40",ASA A2-5 spindle nose,1.97"hole,3&4-jaw,#8800

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Fax 712-737-8701) Clark Groeneweg

Mitsubishi #M-T35E, 35mm, 6-spindle, cross slide, CNC pick-off, Fanuc 15TT

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Mitsubishi #M-T42E, 42mm, 6-spindle, cross slide, CNC pick-off, Fanuc 15TT

Welsh Machinery, Cedar Rapids, IA 319-730-0326 (Fax 319-377-3035) Brad Pekarik

Miyano #JNC45, 18.5" x 18.5", Fanuc control, stk # 76013, 2-available

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #KC29-2SC, CNC 4-axis Simulturn turning center, 1988

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

Okuma #LC20-1SC, OSP5000L-G, 15-3/4"swing, 10"3-jaw, tailstock, chip, 1986

Smith Machinery Co, Ames, IA 515-233-6330 (Fax 515-232-9411) Jim Smith

KANSAS

G & L #15UX72" CNC lathe, Mitsubishi ctrl, drives, remanuf.1994 by Daniluk Corp.

Chapman R & D Inc, Arkansas City, KS 620-442-5881 (Fax 620-442-7747) Ray Chapman

Mori-Seiki #SL-7A. 35 over bed 61 z Fanuc 6-T,12 tool turret,prog.ts,exc.,IP/UP

Chapman R & D Inc, Arkansas City, KS 620-442-5881 (Fax 620-442-7747) Ray Chapman

Mori-Seiki #SL7B, CNC lathe,35.8"o/bed, 68.8"centers,50 HP,21.5"chk,Fanuc 6TB,'81

D & S Equipment, Leoti, KS 620-375-2513 (Fax 620-375-4538) Steve Krenzel

KENTUCKY

Cincinnati Cinturion #75, universal CNC turning center,7.2"X,24"Z axis,Fanuc 0i-Mate

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Hardinge Cobra 65, CNC lathe, 21"swing, 2.5"bar, 10"X-axis, 31"Z axis, 1998

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Okuma Cadet #LNC8, CNC lathe, 15/85"swing, 9.8"turn.dia, 19.69"turn.length, 1999

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

Olympic-Seiki #VL-8, inverted vertical spdl.CNC turning,Fanuc Oi,13.8"sw.,5.9"cr.,2003

ASI Machine Tool, Richwood, KY 859-485-8370 (Fax 859-485-8374) Toby Frohlich

MARYLAND

Mazak #QT20 lathe, Mazatrol T2, 10"chuck, 40"cc, 3.15"bore, 1985 [74620]

Clark Machinery Sales LLC, Lutherville, MD 410-252-5494 (Fax 443-269-0660) Troy Clark

MASSACHUSETTS

Hardinge Cobra 42, 6"chuck,tailstock,chip conv.,Fanuc 21TB,collets,v/good,1998

Cap Machinery Corp, Auburn, MA 508-832-8555 (Fax 508-832-4142) John Capuano

Hardinge Talent #10/78, Fanuc 0i-TB,C-axis, 3.07" bar cap,10" chk, only 2300 hr, 2006

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Hitachi-Seiki #HT20SIII, Seicos 8"chk, tool probe, parts catch, toolstock, 1996

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Kia #4NEII-600, 10"chk,24"cc,Fanuc 10TF,tlstk w/prgmbl.quill,3150RPM,tlg,1989

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Mazak Slant Turn #40N, ATC mill center,12"chk,80"cc,80 ATC,40 HP,Fanuc 11T,'89

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Methods Slant #50, Yasnac LX-3,10"chuck,2.5"bar cap.,tailstock,chip,1994 (2)

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Milltronics #ML15, 15"x40",3K RPM,Centurion 7,8"chk, 5C closer,Pragati 8-pos.trrt,'04

A Green Co Inc, Worcester, MA 508-791-6800 (Fax 508-791-6838) Harvey Green

Miyano #BND34T2, Fanuc OT, live tooling, LNS Hydro bar feed, 1994

C & A Machinery Inc, Norwood, MA 781-440-0983 (Fax 781-769-9486) Robert Collum

Nakamura Tome Slant 1, Fanuc 11TA, best offer, 1985

Brothers Machinery Exchange I, North Andover, MA 978-688-2888 (Fax 978-688-4124) Ed Wallace

Nakamura Tome #TW20, w/barfeeder, chip conveyor, nice shape

Brothers Machinery Exchange I, North Andover, MA 978-688-2888 (Fax 978-688-4124) Ed Wallace

Okuma #LB-15, CNC lathe, 15 HP, 1986

Brothers Machinery Exchange I, North Andover, MA 978-688-2888 (Fax 978-688-4124) Ed Wallace

Okuma #LB15II-MW, 4-axis,Big Bore,sub-spdl,OSP7000L w/graphics,collet chks,1998

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Royal #MT-26, gang tool, 6000 RPM, 5"chuck, Fanuc OT, 2002

Fabricating & Production Mchy, Spencer, MA 508-885-9973 (Fax 508-885-9976) Joe S.Lowkes Jr.

Takahashi Microstar Twin Spdl. #N1X-WII,gang tooling style,6000 RPM,twin Fanuc OT

American Systems & Equipment, Chicopee, MA 413-739-8170 (Fax 413-739-7964) Mark Barowsky

Toolmex #TUR630AMN3000, 118"cc,25"SOB,15"SOC,1-1500/2-1850 RPM,'00,#101590

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

Victor #2280CDL, Fanuc 20TA,4.1"SH,20"3-jaw chk,stdy rst,tlstk,clnt,'99 (101493)

Nevins Machinery Concepts Inc, Brockton, MA 508-894-0008 (Fax 508-583-1528) Jim Nevins

MICHIGAN

Akira-Seiki #SL20, Fanuc OT,6.5"chuck,T/S,18"swing,13"Z,6k RPM,conv.,2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Bridgeport EZ-Path Romi, 16.5"x40",8 HP,3000 RP,8"chuck,EZ-Path CNC ctrl,1995

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Bridgeport Romi Power Path, 16" x 22", 12 tools, 15 HP, 6000 RPM, 1997

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Chevalier #FCL2480, cnc lathe,24"sw.,80"cc,15"turn,12"3-jaw,Anilam 4200T Plus,'03

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Chevalier #FCL4080A, 40"swing,80"cc,7"big bore spindle,tailstock,CNC turret,2007

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Daewoo Puma 10"-2SP, twin spindle, Fanuc 16T, 1996 - 1998 (6) #5823

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Daewoo #10HC, Fanuc 18T,10"chuck,20"swing,3.4"bore,3500 RPM,12 ATC,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo Puma #12L-B, 22.8"swing o/bed,40.2"turn.lgth,20-2000 RPM,12"chk,1995 (#218259)

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Daewoo Puma #12-LC, Fanuc OM,4.6"bore,22.4"swing x 42"cc,35 HP,15"hyd.chk,1996

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo #400C, 2-axis,swg/cut/bar 30"/22"x6.5"x 44"cc,1.5k RPM,50 HP10"chuck,21"chuck,Fanuc 21iTB,2006

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Daewoo #S390L, Fanuc 21T,12"chk,31"sw.,22.4"max.dia.,3"bar,41"cc,3500 RPM,2001

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Daewoo #TT2500SY, 8-axis,Fanuc 18i,(2)10"chks,35 HP,42"cc,31.5"sw.,3.5"bore,'05

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Daewoo Puma #V15-2SP, Fanuc 18T,(2)21"chucks,31.5"sw.,29.5"L,(2)12 ATC,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Dainichi #F250, Fanuc 21iT,10"chuck,3.39"bore,tailstock,3500 RPM,chip conveyor

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Dainichi #F-30, Fanuc OT,12"chk,3"bore,22"sw.x 50"cc,S/R,3500 RPM,12 ATC,'93

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Doosan Puma #VT450, Fanuc 18I TB, 14.96" turn, 2500 RPM, 2005

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Doosan #S390L, CNC lathe,Fanuc 21T,chip conv,22.8"swing,30"cc,3.5 bar cap,2001 (2)

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Doosan #S390L, Fanuc 18T, 30.3"swing, 30 HP, coolant system, chip, 12 tools

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Doosan #S390L, Fanuc 21T,12"chuck,35"swing x 40"cc,30 HP,4"bore,3500 RPM,2001

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Doosan #V350T, Fanuc 18T,(2) 14"chucks,(2) 8 ATC,24"swing,18"cc,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Emag #VSC250 Twin Vert.Spdl.Turn.Cntr,10"chks,2-turrets,live tlg,Fanuc,2002 (4495)

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

Emag #VSC400, vertical turning center, 1997, #217746

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Eurotech Elite #730SL, Fanuc control,live tooling,sub-spindle,bar feed,xclnt

Sterling Machinery Ventures, Troy, MI 248-879-1989 (Fax 248-879-5501) Will Secor

Fuji #ANS-40T, 23"sw.,12"chk,Fanuc 18iT,robot ldr,12 pos.trrt,3k RPM,'00,#7598

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #HL-2, 8"chk,20"swing x 24"cc,4k RPM,20 HP,conv.,tlstk,tooling,2"bar,'97

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #HL-2, Haas control, 8"chuck, tailstock, chip conveyor, misc. tooling, 1997

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #HL-4, 10"chuck,24"swing x 39"cc,3400 RPM,30 HP,12 ATC,3"bore,conv.,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #HL-4, Haas CNC, 24"swing, 14.5"max.turn, 38"cc, chip conv, 10"chuck, 1996

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Haas #SL30T, CNC lathe,30"swing,39"cc,3400 RPM,10"3-jaw,12 stat turret,2005 (8793)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Haas #SL30T, 10"chuck,12 ATC,gear box,3"bore,30 HP,tool probe,mint,2006

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Haas #TL1, 16" sw. x 30" centers, 2.3" spindle, 7.5 HP, 8" chuck, tailstock

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Hardinge #8/52-SV, Fanuc OT,8"chk,12 ATC,18"swing x 16"Z trvl,2"bar,5k RPM,'06

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge Conquest 42, GE Fanuc OT, 16C collet tlstk,chip conv,part catcher,1989

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge Conquest 42, 1.625"bar,10 HP,5k RPM,11"X,14"Z,12sta.turret,GE Fanuc,'88

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Hardinge Conquest #GT27, Fanuc 18T,Har-Matic BF,1-1/16"bar,gang type,conv.,'99

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hardinge Conquest #T42, 4-axis, live tooling, Fanuc 18T dual turret, chip conv.

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Hardinge #CS42 Conquest, 19-1/2"swing, 5000 RPM, GE Fanuc OT, 1988 (8360)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Hardinge Quest 851SP, GE Fanuc 16i-T,lv.tlg,20C spdl,16C sub,C&Y axis,chip,brfbr,'00

Advance Machine Corp, Tawas City, MI 989-362-9192 (Fax 989-362-9194) Gary Chomin

Hardinge #VT100, 27"sw,15-3/4"turn.dia,12 sta.trrt,tlstk,20 HP,1997-2000,#7345-47

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Hardinge #VT200, Fanuc 18T, 25.5" sw, 15.75" max.turn, 3000 RPM, 1995

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Harrison Alpha 400 Plus, flat bed CNC lathe, 16" x 48", Fanuc control, 1999

Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Fax 248-926-1003) Don Paul

Hitachi-Seiki Hitec Turn 20SII, CNC lathe,10 pos.turret,8"3 drawer hydraulic chuck,parts catcher,Seiki Multi CNC ctrl

Industrial Asset Recycling, Shelby Township, MI 586-991-0163 () Sales Dept.

Hitachi-Seiki #HT20SIII, 2-axis,8"chk,5k RPM,20 HP,tlstk,Seicos LY CNC,graphics,'97

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Hwacheon Hi-Tech #310L, Fanuc 18i,24"sw.x52"cc,3200rpm,10"chk,12atc,3.5"bore,'04

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Hyundai Kia #SKT21, cnc lathe,21.7"sw,16.14"mach lgth,4k RPM,12atc,Fanuc 0iTB,'05

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Hyundai Kia #SKT250MS, CNC lathe,24.4"swing,10"chk,8"sub chk,Fanuc iTB,'05

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Ikegai #TCR25Y, Fanuc 0T,Y-axis and live tooling, full C-axis spindle 25/30 HP

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Johnford #TC20C, 16.53" swing, 20.47" length, live tooling, bar feeder, 1998

Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Fax 269-751-7433) Mike/ Mitch

Johnford #TC20C, Fanuc OT, 8" chk, 2.6", live tlg, barfeed, tlstk,1998, #745

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Mazak #200M/250M, milling,tool holders only, (13) available

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak Dualturn #20, (2) 8"chucks,2-turrets,Mazatrol Fusion 640,chip conv,2000

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak #HP250, Fusion 640T,10"chuck,3"bore,probe,T.S.,conveyor,1998

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak Integrex #200-IISY, 21.5"sw.,39.5"max cut.length,40 ATC,tons of options,'02

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mazak Integrex #50Y-100"cc,120 ATC,15"chuck,Maz.T-Plus,steady rest,1997

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak Integrex #50Y-2500, 100"cc,120 ATC,15"3-jaw chuck,SMW steady,T-Plus,1998

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Mazak Integrex #50Yx2500U, 28"x100",120 ATC,live mill,steady rest,Maz.T-Plus,1998

Sterling Machinery Ventures, Troy, MI 248-879-1989 (Fax 248-879-5501) Will Secor

Mazak #M4/1000, CNC lathe,Fanuc 6TB,15"chuck,22"sw.x 40"centers,1982 (5)

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mazak #QT15 lathe, 8"chuck, tailstock, Mazatrol T-Plus, tooling, 1995

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mazak #QT15N, universal CNC lathe,17"swing,10"cut,2"bar,19.6"cc,8"chuck,20 HP,4.5k RPM,T32B CNC,$25k,1992

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #QT15N, universal CNC lathe,19"swing,14"cut,2"bar x19.6"cc,8"chuck,20 HP,4.5k RPM,T32B CNC,$25k,10/1992

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #QT20N, T-32 control, 20 HP, tailstock, chip, 10-tools, 1986

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Mazak #QT20N, T-Plus,8"chuck,20 HP,20"swing,2.4"bore,tool eye,conv.,1997

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #QT350/1250, Fusion 640T,3.5"bar,12"chuck,25.9"swing,15.7"cut,47.6"cc,12 tools,35 HP,tailstock,2002

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mazak #SQT-10, 10 HP lathe,T-32-2 CNC,11.8"sw.,11"L turn,6k RPM,probe,conv.,'93

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #SQT250M, PC Fusion 640T,10"chk,20"sw.x 25"cc,C-axis,live tools,12 ATC,'01

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mazak #SQT250M, PC Fusion 640T,10"chk,26"cc,2.5"bar cap.,21"sw.,4k RPM,25 HP,'01

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Methods Slant #50, 2-axis,20"sw,40"cc,collet chk,3k RPM,20 HP,Yasnac,1995 (8221)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Mighty Viper #VT40A, 2100rpm,39.37"swing,32.28"turn dia,37.6"L turn,Fanuc 21TB,'06

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mitsubishi #MTC10B, Meldas 325LGV,23.6"x 41.2"cntrs,used 4600 hr,'99 (9)#8845-56

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

Mitsubishi #M-TC8B, 2-axis,8"chuck,tailstock,chip conv,15 HP,Meldas ctrl,nice,1994

Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Fax 248-543-7004) Kimball R Roberts

Mitsubishi #M-TC8B, 8"chuck, 15 HP, tailstock, chip conveyor, Meldas, 1994

R T Machinery Sales Inc, Troy, MI 248-743-9700 (Fax 248-743-9702) Bob Tesch

Miyano #BNC34T, Fanuc OT,4.5"chk,1.25",LNS bar fd,twin turret,prts.catch,'90 [642]

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Miyano #BND34T2, live tooling, Fanuc OT, LNS Hydrobar feed, 1994, #7911

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Mori-Seiki #CL203B/50, MSG803,tlstk,8"chk,2.8"bore,18.5"sw.x 22"cc,3500rpm,10atc,'00

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CL253A, MSG803 w/Mapps,chk,12 ATC,20"sw. x 19.7"Z trvl,3.1"bore,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CL25A, Fanuc 18T,20.5"sw. x 24"cc,2.4"bore,10 ATC,tlstk,4k RPM,'95

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #CS250, Seicos 21L Fanuc,15.7"sw.x51"X,inverted spdl,4k rpm,25hp,'04

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #DL151Y, twin spdl CNC lathe,7.8"max lgth,16.5"sw.,12 trrt,Fanuc 18,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Mori-Seiki #DT20, (2) 8"chks, 2-turrets, Fanuc 16T, Toellner loader, 2002

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mori-Seiki #MT2000S, milling,Y-axis,sub.spdl,40ATC,33"x 40",2.9"bore,20HP,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #NL2500, gantry load,14"max.dia.,3.1"bar,10"chk,34.7hp,4k rpm,chip,'95

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Mori-Seiki #NL2500/700, MSX850w/MAPPS,10"chk,36"sw,31"cc,4k rpm,3.58"bore,'04

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL253B/500, MSG500,10"chk,26"sw.x24"cc,3.4"bore,3500 RPM,conv.,'01

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL25B, MF-T4,20"sw.x 24"cc,10"chuck,3500 RPM,3.1"bore,conv,1991

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL-25B/500, 2-axis,swg/cut/bar 20,5"/10"/2.75"x 24"cc,3.5k RPM,25 HP,10"chuck,Yasnac,1991

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Mori-Seiki #SL6A, 15"chuck,Fanuc 11T,tailstock,conv.,27"swing x 36"cc,1800 RPM,1986

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #SL-8F, Fanuc TB,8.5"spdl.bore,24"3-jaw hyd.chk,chip conv.,6 sta.turret

JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Fax 586-756-8866) J. Simonetta

Mori-Seiki #ZL250/600, MSC501, 2-turrets, 10"chuck, BB, 26"cc, 3500 RPM, 2000

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Mori-Seiki #ZL250B-600, 4-axis,3500 RPM,10"chk,tailstk,MSC-501,2000,#S15919

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Mori-Seiki #ZL25B/1000, 40"cc, 10"chuck, twin turrets, Fanuc 15T, tailstock, 1991

Nash Tool & Machine Supply, Warren, MI 586-759-1250 (Fax 586-759-5916) Ken Nash

Mori-Seiki #ZL25B/500, Fanuc 15TT,20.5"swing,chip conv,tailstk,3.1"bore,1990 (2)

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Mori-Seiki #ZL25B/500, Fanuc 16T,twin turret,Big Bore,chip conv.,3500 RPM,1993

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Nakamura-Tome #STS40, 9-axis,Fanuc 16iTB,(2)12"chks,10 tls,12 trrt,40 T.C.,2000

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Nakamura Tome #TMC18M, Fanuc 21i,4500 RPM,15.7"sw. x 20"cc,8"chk,4 mill.hds,'98

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Nakamura Tome #TW10, CNC Turning Center,dual spdls./turrets, 8.27" max dia,1994

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Fax 616-868-1115) Steve Vanderziel

Okuma Cadet #BB LC-8, universal CNC lathe,19"swing,14"cut,2"bar x40",8"chuck,20 HP,5k RPM,OSP-5020 CNC,1995

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Okuma Capital #L370, CNC lathe,OSP E100L ctrl,20.87",30 HP,chip conv,2004 (2) avail

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Okuma Captain #L370, OSP-L100 ctrl,tailstock,20"swing,20/15 HP,2004 (2) avail.

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Okuma Crown #726 BB, universal CNC lathe,26"swing,15"cut,2.8"bar x 19",10"chuck,20 HP,5k RPM,OSP-5020 CNC,1995

Encore Machine Tool Sales LLC, Hudsonville, MI 616-662-6974 (Fax 616-662-6975) Gary Parker

Okuma Crown #762S, OSP700L,8"chuck,2.44"bore,SMW SS2000 bar fd,tlstk,1996 [#626]

Highland Machinery & Crane, Benton Harbor, MI 269-926-9600 (Fax 269-926-9601) C J Pawlowski

Okuma Crown #762-S-BB, OSP 700L,10"chk,3.1"bore,21.6"sw.x 20"Z,3500 RPM,1998 (2)

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma Crown #L1060, OSP U10L,8"chk,19.68"cc,tailstock,18hp,4200rpm,hi-pressure (2)

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Okuma #L370, OSP-E1006,10"chuck,prog.tails,20"sw.x 20"Z,3.1"bore,2004

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #LB15, 15.75"swing o/bed,20.47"turn.length,12-sta,75-4200 RPM,OSP 5020L,(218289)

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Okuma #LH35N, OSP5000L,24"swing,80"cc,30hp,3k rpm,4 & 8 sta.turrets,chip conv,'85

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Okuma #LT15M, OSP-U100L,10"chks,twin spdl/trrt,C-axis,20"sw.x 40"cc,3.1"bore,'02

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma #LU400BB/1250, P200CNC,17"chk,50"cc,4.3"bore,40hp,twin turret,SR,conv,'08

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma Spaceturn #LB-250T, OSP-E100L,8"chk,4500rpm,12 ATC,20"sw.,2.4"bore,'04 (2)

S & M Machinery Sales Inc, Warren, MI 586-755-1234 (Fax 586-755-1414) Spencer Minns

Okuma-Howa #2SP-15HG, twin spindle, Fanuc 18T, 60-6000 RPM, 15 HP, 1996

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Okuma-Howa #2SP-20H, twin spindle, Fanuc 18TT, 32-3200 RPM, 20 HP, 1995

Concord Machinery, Pontiac, MI 248-335-0300 (Fax 248-335-0553) T.Hill/ Jason K.

Okuma-Howa #ACT3, 18.28"sw.,23.85"BC,3500rpm,Fanuc 0T,tlstk,10"Kit chk,'91,#s3645

F P Miller Company, Jackson, MI 517-787-3100 (Fax 517-787-3116) Craig L. Ward

Okuma-Howa #V35R, lathe,19.69"sw.,13.78"turn dia,2500 RPM,12 trrt,Fanuc 18T,'99

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

OMT Standard Modern, 20"x40",toolroom style w/conversational Century ctrl,1995

Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (248-926-8499) Randy/ Jeff/Chris

Orlikon / Boehringer #180C-U, CNC lathe,12"x40"w/tlstk,12 pos.trrt,8"SMW chk,1984

Advance Products Corp., Benton Harbor, MI 269-849-1000 (Fax 269-849-2200) David Kraklau

Romi #G20, Fanuc 21iT, 19.6"swing, 11"turning dia, tailstock, chip conv, 2000

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Romi #G20, Fanuc 21iT,19.6"swing,11"turning dia,tailstock,chip conv,8"3-jaw,2000

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Takisawa #TX3-l5, 18"chuck,21"swing,16"turn.dia,35"cc,Fanuc 6T,30 HP (7667)

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Fax 616-949-3461) Jeff/Bill/David

Topper #TNL-100A, w/bar feeder,20.4"sw.,10.4"turn dia,15.7"turn lgth,Fanuc OiTB

R & J Machinery Sales, Milford, MI 248-685-7879 (Fax 248-676-0389) Jeff Bruce

Victor #VTurn 20, Fanuc 0T,17.72"swing,9.02"turn dia,taistock,chip,8"chuck,2000

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Victor #VTurn 26, Fanuc 15T,20.47"swing,15"turn dia,tailstock,chip,12"chuck,1996

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

Warner & Swasey #SC28, 28"/34"swing, Fanuc OT CNC, 1994, #10204

Gibbs Machinery Co, Warren, MI 586-755-5353 (Fax 586-755-0304) Sales Dept.

You Ji, vertical turning center w/Fanuc OT control new 2000

Tramar Industries Inc, Farmington Hills, MI 248-426-5555 (Fax 248-426-0004) Mauro/Cesar

MINNESOTA

Haas #HL2, CNC lathe, 1998, #944402

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Haas #SL20T, 8" chk, 10 sta.turret,Haas Servo mag.barfd,tailstk, parts catch, 2005

Productivity Inc, Minneapolis, MN 763-476-8600 (Fax 763-476-4092) John Lawton

Hardinge Conquest #T42, 2-axis,12 pos.trrt,Spego 16'barfeed,chip,Fanuc 18-T,1995

Holt Equipment, Hopkins, MN 952-938-2202 (Fax 952-945-9917) Wayne Mader

Hardinge #T42, 20C collet, with milling & sub spindle, Fanuc 18, barfeed, 1994, #944347

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Johnford #TC50, Fanuc OT, 12.6"max.turning, 3000 RPM, 12-position turret, 1996, #944412

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

LeBlond Tool & Die Maker, 2400rpm,1.5 hole,Acu-rite DRO,Hardinge spd.chk,thrd.dial

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Mazak #QT-15, Mazatrol T-2,11"swing,11.4"cc,4500 RPM,8 pos.trrt,10 HP,tlstk,chip

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Mazak #QT20N, T-Plus,ATS collet chk,p/catcher,T/S,20hp,preset,chip conv,1998

Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Fax 7634949827) Theron/ Matt/Chuck

Mazak #QT30N, universal, combination lathe, 12"chuck, 39.7"cc, Mazatrol T Plus CNC, 1995, #944358

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mazak Quick Slant #20,4-axis,Cam T-4,15"sw,20"cc,collet chk,LNS,12'6 port BF,'86

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Miyano #BNC34, 4000 RPM, 5.5"x 9.25" travels, 1986, FOB: Elk River, MN

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Miyano #LE22, Fanuc OT, collet chuck, parts catcher, tailstock, live mill, 1996

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Monarch Ultracenter, Fanuc 15,opposed 15"chucks,live twin turrets,1993 (2)

Nelson Machinery Inc, Cedar, MN 763-413-0966 (Fax 763-413-0569) Don Nelson

Mori-Seiki #CL-20A, CNC lathe w/bar feeder, parts catcher, 1995, (2) avail.

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #CL-20A, 2-axis CNC turning center,12.2"swing o/bed,6.5"turning dia.,4k RPM,6 station turret,MSC-518 CNC,7-1/2 HP

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Mori-Seiki #SL-154, 1.6"bar,26.8"swing,16.9"turn dia.,presetter,tool mngt,barfeed,2002

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #SL204, SMC CNC, w/sub spindle & live tooling, 8"main/6"sub chuck, #944179

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Mori-Seiki #SL-25MC/500, CNC w/live milling,C-axis,parts catcher,bar feeder,10"chuck,1996

Cutting Edge Machine Tool Sale, St. Michael, MN 763-497-2086 (Fax 763-497-2086) Pat Donaghue

Mori-Seiki #ZL203SMC, combination lathe, MSC501 control, 6"chuck, 2003, FOB: Mn, #944277

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Okuma Cadet #LNC8, OSP5020L Control, 12 position turret

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Okuma #ES-l10 , 10"chuck, Okuma OSP-U10L, 20.47"swing, 3000 RPM, 12 ATC, 2005

Used Machinery Sales LLC, Elk River, MN 763-441-5152 (Fax 763-441-5075) John Roedel

Okuma Impact #LU15, 4-axis CNC turning center,14.17"turn.dia.,4500 RPM,30 HP,12 sta.upper trrt,8 sta.lower trrt,OSP5020L,'96

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma #LB15, 2-axis CNC turning center,19.69"turning dia.,4200 RPM,10"3-jaw chuck,8 pos.trrt,OSP500LG CNC,RS 232 port,15 HP

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma #LB15, chucking lathe, OSP5020L CNC Ctrl, 15.75"swing, 12 sta.turret

Strand Industrial Machinery, Hamel, MN 763-478-0306 (Fax 763-478-0307) Dan Strand

Okuma-Howa #2SP-35HG, twin spdl CNC turning center,2-axis,14.9"turn.dia,3500 RPM,(2) 12 sta.trrt,2-jaw chk,Fanuc 18T,'01

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma-Howa #ACT-20, 4-axis CNC turning center,19.68"swing o/bed,11.81"turn.dia.,4500 RPM,12/8 sta.trrt,Fanuc O-T,10 HP

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Okuma-Howa #HL-20, 2-axis CNC turning center,19.6"swing o/bed,10.24"turn.dia,4500 RPM,12 pos.trrt,3-jaw pwr chk,Fanuc 18iT

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Southwest Ind. #TRL1840V, CNC turning center,2-axis,14"swing o/bed,7"turn.dia.,40"cc,2500 RPM,3&4-jaw,Proto-Trak VL CNC,2000

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Supermax #GT-200, Fanuc 100E,20"swing,20"cc,6"chuck,chip,15 HP,6k RPM,new,'09

Cities Advanced Machinery, Eden Prairie, MN 952-944-6060 (Fax 952-944-0043) Harry Youtsos

Supermax #TC-15, 2-axis CNC turning center,18.9"swing o/bed,9.8"turning dia.,6k RPM,12 station turret,3-jaw chuck,Fanuc O-T

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

Wasino #LJ-5N, 2-axis CNC turning center w/gantry load,full enclosure,4k RPM,8 pos.trrt,Fanuc Series 21T,chip conveyor

Hoff-Hilk Auction Services, Minneapolis, MN 612-521-5500 (Fax 612-331-3291) Russ Hilk

MISSOURI

Kingston #TJ-1650, 8"chuck,7.5 HP,D1-6 spdl.,2.125 spdl.hole,3 speed,2003

Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield

Milltronics #T-17A, 12"chk,2"bar,2-axis,10hp,8 pos.tur,tlg,2-1/8"spdl.hole,1995

Used Machine Sales, Carthage, MO 417-358-9193 (Fax 417-358-9193) Jim Holyfield

NEW JERSEY

Daewoo Puma #200C, Mits 520L,8"chuck,tailstock,chip conveyor,1997,#141822

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Daewoo Puma #300C, Fanuc 21iT,12"chuck,4"bar,tailstock,chip convyr,2001,#141883

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Hardinge Conquest #T42, Fanuc 18T,live tool,sub spdl,Spego barfeed,1999,#142672

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mori-Seiki #RL253, MSG-803,(2) 10"chks,LG-10 gantry ldr,chip conv,2000,#142433

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Mori-Seiki #S-25MC, Fanuc 0T,live tool,C-axis,8"chk,tlstk,chip conv,1991,#143271

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Nakamura Tome SC-300, Fanuc 18T,10"chuck,2.79"bar,tailstock,chip,1998,#142445

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Okuma #ESl8, U10L w/IGF, 8"chuck, tailstock, chip conveyor, 2000, #143511

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Okuma #LB15IIMBB, 7000L w/IGF,live tool,C-axis,10"chk,PC,tlstk,chip,1997,#144009

Machinery Values Inc, Harrison, NJ 973-497-7540 (Fax 973-497-7541) Mike DeRisi

Wasino #LJ103M, 3-axis, live tooing, Fanuc 10T, chip conveyor, new 1987

Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Fax 973-992-8334) Michael/ Dave

NEW YORK

Accustar CNC Turning Machine, 20" x 42"

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Binns & Berry Data 90, 33.5"x197",27.5"OCS,4-1/8"bore,1200 RPM,Fagor 8020TG,'90

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Cincinnati Avenger #200MS, 850SX,live tools,sub-spdl,SMW BF,options,clean,1995

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Cincinnati Falcon #300, 25.5"swing,40"cc,3000 RPM,Acramatic 2100 CNC,40 HP,1997,#17187

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Daewoo Puma #10, Fanuc 10TF, 10" 3-jaw, tail, 12 position Turret, 1986

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Daewoo Puma #300C, 23"x36"cc,4"bore,12"3-jaw,chip,Fanuc 18-TC,35 HP,1999

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Daewoo Lynx #200B, Mits M-50,S20 collet,2"bar,4500 RPM,SMW BF,chucker,clean,'99

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Daewoo Proturn #60/4200, 28" x 157", Fanuc OT CNC, 25 HP, tailstock, 1996, #19139

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Deemor #750CNC, 31"swing,98"cc,10.23"bore,25"chks,Fagor 8055T CNC,'03,#15640

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Emco Turn #360, 8"chuck,18"swing,22"Z,live tooling,4000 RPM,30 HP,1988

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Emco Turn #465DS, 6-axis,2-spdl,2-turret,live milling,C-axis,Siemens 840D,1999,#15943

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Emco-Turn #465MC, 2 spindle,2 turrrt,live mill,C-axis,gantry load,Siemens 840D,1999,#15942

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Feeler #FTC180, 22"swing,20"cc,8"chuck,2"bar,V8 turret,chip,Fanuc 0TC,1997,#18024

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Feeler #FTC180, 22"sw,Fanuc OTC,3-jaw hyd.chk,8 pos.trrt,35-3500 RPM,20 HP,'97

Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Fax 631-467-8249) Ron Shuster

Haas #HL-4, 24"swing,40"centers,10"chuck,12-pos.turret,Haas CNC,rigid tap,1996,#16335

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Haas #SL-40L, 15"chuck,4"bar,25"/40" x 80"cap,40 HP,chip conv,unused,2009

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Hankook Dynaturn #17, 67"x 315",4-pos.turret,60 HP,steadies,Fanuc 21T,2008,#18744

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hardinge Conquest #T42, Fanuc 18T, live milling, sub-spindle, bar feeder

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Hardinge Conquest #T-42, live tools/sub-spdl,1-5/8"bar,6k RPM,barfeed,mint,2001

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Harrison Alpha 400 Plus, 16"/23"x 50"cc, GE Fanuc, CSS, 10 HP, 1998

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Harrison Alpha 550, GE Fanuc,21"x 60"cap,12"chuck,LNS steady,15 HP,excellent,1999

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Hitachi Seiki HiCell #23, CNC lathe,15.7"swing,24"centers,8"chuck,V12 turret,Seicos L3,1995,#18191

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hwacheon Hi-Eco #35, lg.bed,23.6"swing,50"cc,12"chuck,Fanuc 0TC CNC,1997,#16543

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Hwacheon Hi-Eco #35, 23.6"swing,40"cc,12"chuck,4"hole,Fanuc 0TC,1997,#16544

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Ikegai #FX25Z, chucker,Fanuc 6T,2-1/2"bar capacity,8 station turret,30 HP,1985

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Johnford, 61"x 137", 43"swing, 250 RPM, 4-pos turret, 50 HP, Fanuc OT, 1994, #18283

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Kia #SKT400, Fanuc 21T,18"chuck,25.5/30.6"sw,47"cc,3.5"bar,35 HP,mint,2008

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Lansing 'G' CNC Lathe Model NV-30

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Mazak Cybertech, 33.8" swing, 177" centers, Mazatrol 640 CNC, 12 pos. turret, 2006 #19143

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak Integrex #400IVS-1500U, 12" main, 10" sub, x,x2,y,y2,b,c axes,835 hrs,2007

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak Powermaster #1500U, 34" swing,63" centers, 4.64" spindle, mazatrol t-plus, '97, #19066

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak Powermaster 4000, 34"sw,157"cc,9.75"spdl,24"chk,Mazatrol CNC,1982,#16264

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #QT-250, 23.6"swing,50-5000 RPM,20 HP,Fusion 640T,12 pos.turret,bar feed,2001,#18357

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #SQT-15M, 3-axis,21"sw,live milling,C-axis,Mazatrol T-Plus,1997,#16658

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #SQT-200MS, 20.67"swing, 35-4500 RPM, 25 HP, Mazatrol T-Plus CNC, 1998, #18356

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mazak #SQT250S, Fusion 640, sub-spindle, chip conveyor, 2000

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mazak #SQT-30M, T32-3 Plus CNC,22"x 60"cap,10"chuck,30 HP,live tools,clean,1994

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Mazak SQT-30M/1500, 22" swing, 60" centers, C-axis, milling, steady rest, 1994, #19152

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mighty #VT-8, gang type, 7"swing, 6k RPM, 1"bar, Mits Meldas 64, 2001

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Milltronics #ML20/60, Centurion 6, 20"swing, 60"cc, hand wheels, 1998

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Miyano #ANC45S, Multi-Task Turn CNC Turning Center

S & S Machinery Co, Brooklyn, NY 718-492-7400 (Fax 718-439-3930) J. Pugliese

Miyano #BNC-34T, Fanuc OT,sub turret,B-axis,5k RPM,Grindley barfeed,clean,1988

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #BND-34C, 1.31"bar capacity, 7"turning length, 2 turrets, Fanuc 0TTC, 1994, #18161

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Miyano #BNE-51SY, Fanuc 18,8-axis mill/turn,U/L turrets,Iemca 551 BF,mint,2005

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #LR-01R, Fanuc 21iT,live tools,auto load/unload,6k rpm,12 pos trrt,mint,2004

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Miyano #LZ01R, 2.76"work dia,12-pos turret,auto pt.load/conveyor,Fanuc 21iT,2001,#18029

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #CS-250, Seicos 21L, 10"chuck, 2004, (2) available

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #MT2500SZ, 21.7"sw.,60"cc,30 HP,4k RPM,Fanuc 18 9-axis CNC,'04,#18796

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #NL2500/700, MSX-850, 10"chuck, 3", 2004

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Mori-Seiki #SL-250BSMC, 10"chuck,V10 turret,live milling,C-axis,MSC-501 CNC,1998,#18954

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Mori-Seiki #SL-253B/500, MSG-500, 10"chuck, 3", 2001

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Nakamura Tome SC250, 17.72"swing, 24"centers, 8"chuck, Fanuc 21iT, 2002, #17039

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Nakamura Tome Super #NTJ, 10-ax,2 spdl,2 trrt,B/C/Y-axes,Fanuc 18iT,'05 #17252

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #B300C Multus, OS-P200L,7-axis mill/turn w/40 pos.ATC,24"x40"cap,options,'06

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma Cadet BB, OSP-5020L,10"chuck,3.15"bore,12 pos.trrt,15 HP,chip conv,nice,1995

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma Captain #370, E100L CNC,8"chk,2"bar,12-pos.turret,20 HP,4500 RPM,nice,2002

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma Crown #762E, OSP U10L,21.6"swing,19.68"cc,2.44"bore,tailstock,chip,1999

Grand Marshall Machinery Inc, Hauppauge, NY 631-777-3600 (Fax 631-777-3603) Larry/ Paul

Okuma Crown L1060 Big Bore, 21.75" swing, 20" center, 10" chuck, 3.15" bore,2000, #19149

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #LB12, OSP-500L, 8"chuck, 1.7"bar cap, 10 HP, 8-pos turret,chip.conv.

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma #LB45-II, 33"swing, 25"turning dia., 118"centers, OSP 7000 CNC, 2000, #18963

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Okuma #LU300M, E100L, 5-axis,twin turrets,live tools, 8"chk,2"bar,tlstk,2003,clean

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Okuma-Howa #ACT15, Fanuc 18T,6"chuck,1.6"bar,6000 RPM,chucker,clean,1997

Star Asset Management, New York, NY 212-799-2943 (Fax 208-439-8859) Mark Ettinger

Omni-Turn, 12" x 12" & 12" x 9" travels, 4K RPM, 2 & 5 HP

Richlin Machinery Inc, Farmingdale, NY 631-694-9400 (Fax 631-694-9415) Irv Richlin

Poreba #PNA 60, 24"x78",8-sta,4"hole,2400 RPM,2 SR,chip conv,Fanuc 0iTC,2007,#15717

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Poreba #PNA110x4M, 43"x157",steady rests,8-pos turret,Fanuc OiTC CNC,2008,#16812

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Poreba #PNA110x6M, 43"x236",8-pos.turret,32"4-jaw chuck,Fanuc oiTC CNC,2007,#18365

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Poreba #PNA60, 24"x78",8-station turret,4.1"hole,2400 RPM,2-sr,Fanuc 0iTC,2007,#15717

Prestige Equipment Corp, Melville, NY 631-249-5566 (631-249-9494) Terry Lashin

Poreba Slant Turn, 29"x157",Fanuc OiTC,7"thru hole,10 pos,chip conv,2007,#16577

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Ravensburg #KH100 CNC, lathe,Siemens 810T,70"chk,79"sw,78"Z,57"X,300 RPM,'91

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Takisawa #EX-110, Fanuc 21iT, 10"chuck, 3", chip conveyor, 2002

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Takisawa #TS30, Fanuc 11T,10"chuck,24.5"swing,86"cc,3000 RPM,30 HP,steady rest

Prime Machinery Inc, Oyster Bay, NY 516-922-7977 (Fax 516-922-9691) Steve Brenner

Toolmex #TUR-930MN, 37.4"x236",Fanuc 21iT,5.5"bore,1200 RPM,sauter turret,2008,#17943

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

Yang #ML-60A, 28.3"swing,50"centers,15"chuck,12-pos.turret,Fanuc 0iTC CNC,2006,#18923

Prestige Equipment Corp, Melville, NY 631-249-5566 (Fax 631-249-9494) Paul Lashin

NORTH CAROLINA

Doosan Dooturn #V5P VTL, 20.86"chuck, ASA A2-8 nose, 472 IPM, 1997, #1445

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hardinge Emag, inverted spdl.vert.turning ctr,36 HP,12 sts,50-4500 RPM,(2),#1425-26

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hardinge Emag, inverted spdl.CNC vert.turning ctr,10.3"turn dia.,(2),#1427-28

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Hwacheon CNC Turning ctr, live tooling,15.7"SOB,15.7"turn.lgth,8"chuck,#1429-30

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mazak #QT20, CNC lathe, 8"chuck, 8-turret post., T-Plus CNC control, #1441

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Fax 704-821-7392) Lance/ Mark

Mori-Seiki #SL-3H, 8"3-jaw chuck,12 tools,tailstock,Fanuc 6T,4000 RPM,1984

J Hebert Machine Tool Co., Charlotte, NC 704-825-1511 () Jon Hebert

Okuma Cadet #LNC8, OSP5020L ctrl, tailstock, chip, collet chuck, tooling, 1994

King Precision Technologies, Monroe, NC 704-296-9100 (Fax 704-296-5635) David King

Okuma #LAW 2S, 4-axis, 75 HP, 3000 RPM, OSP U100 controls, (2) available

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LC40 2ST, 60 HP,2500 RPM,Okuma OSP P200 ctrls,rebuilt & retrofit

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LOC 650, 4-axis lathe, 75 HP, OSP E100L controls, 15"spindle bore

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LR102ST, 4-axis, 10 HP, 6000 RPM, OSP 5020 controls

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LR45 2ST, 4-axis, 60 HP, 2800 RPM, OSP 5020 controls (2)

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LU25 2SC, 4-axis, 40 HP, 3500 RPM, OSP 7000 controls, rebuilt

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

Okuma #LU45 2ST, 4-axis, 60 HP, 2800 RPM, OSP 7000 controls

Infinity Rebuild Inc, Charlotte, NC 704-588-4995 (Fax 704-588-5268) Sid L./Tony G.

St. Etienne, 4-axis,Flexmate ctrl,45"swing,26"over C/S,157"btwn.centers,1988,#504

R.P. Machine Enterprises Inc, Statesville, NC 704-872-8888 (Fax 704-872-5777) R. Piselli

OHIO

Bridgeport Romi EZ Path, 16"x 40"collet closer,Aloria tool post,hand wheels,1995

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Cincinnati #18S-60, Acra 900TC CNC,prog.tlstk,3"hole thru,28"sw,19"OC,22.5"x,63.5"z(24304)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Avenger #200MT, 8"chk,2"bar,2-axis,25 HP,chip conveyor,1994,#254079

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Cincinnati Milacron Avenger #250MS turning machine, 3.15"bore, 2.62"hole, 14'bar feed (25802)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Milacron Avenger #250MS turning machine, 3.15"bore, 2.62"hole, 14'bar feed (25801)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Cinturn #2216C, 2-axis CNC Acra w/CRT,16"SMWK 3-J,actuator,1990 (22240)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Cincinnati Talon #210, Acra 850SX CNC,20"swing,tlstk.w/23.6"centers,chip conv,1994

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Clausing Colchester Storm 80, Fanuc 21T,6"chk,16.5"sw,6.69"trn.dia,prgm.tlstk,'97

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Daewoo Puma #10HC, Heavy Cut Fanuc 0T, 10"chuck, 3"bore, nice, 1997

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #10S, Fanuc 0T,12"chuck,3"bore,chip conv,mist collector,1989

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #10S, Fanuc 0T,12"chuck,3"bore,chip conveyor,mist collector,1991

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #12L-B,univ,22.8"sw,19"turn.dia,40.2"turn.lgth,20-2000RPM,11"chk,1995

American Industrial Services, Toledo, OH 419-867-1913 (Fax 419-867-1915) Jodi Filby

Daewoo Puma #200, Fanuc 18I, 8"SMW-Autoblock chuck, chip conveyor, mist collect

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #8S, Faunc 0T,10"chuck,2",mist collector,transformer,1994

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Daewoo Puma #V-15-3A, Fanuc 18T, 20"chuck, 12 ATC, live tooling

D & D Industries Inc, Holland, OH 419-866-6894 (Fax 419-866-6801) Dave Zerbey

Emco Maier Emcoturn #465DS 6-XR4B-V01-N37004,(2)12 pos.tur,7"3-JSmns840D,20hp(2)(24621)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Emco Maier Emcoturn #465MC, 6-axis,twin spdl,R4B-A03-M1003,Smns 840D 6-X ctrl,(2)(24620)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Feeler #FTC20, Fanuc OI CNC,13.7"swing,8"chuck,tlstk w/13.5"ctrs,25HP,4500RPM,new

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Giddings & Lewis #21TT, 21"chuck,7"bar,2-axis,60 HP,twin turrets,1979,#281212

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Haas #SL20, Vector dual drive,3"bore,2"bar dia,23"o/aprn,9.5 OCS.10 pos turret (25941)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Hardinge Cobra 42, 6"3-jaw,Fanuc 21T control,10 HP,5000 RPM,barfeed,1998

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Hardinge Conquest 42, CNC turning center,GE Fanuc O-T Series,10 station turret,5 tool holders,16C collets,1990,#MV1451

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Hardinge Conquest #T32 Big Bore, slant bed,2"rd bar,13.75"turn dist.,#3MT,15 HP,(24395)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Hardinge Emag #VL5, invt.spdl.VTC,Fanuc 18iT cnc,10.3"chk,2362 ipm,4500rpm,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge Emag #VL5, Fanuc 21iT,10.3"turn,auto pkup styl.auto part ldr,4500rpm,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge Emag #VL5, Fanuc 21iT,10.3"max turn,auto part load,live tlg,4500rpm,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hardinge #HC, chucking,12"sw.o/bed,6"sw.o/cross slide,14"spdl.to turret,#18414

Yoder Machinery Sales, Holland, OH 800-622-4463 (Fax 419-865-5557) Sales

Harrison Alpha 400 Plus, Fanuc CNC,16"swg,10"o/cross,49"cc,flt bed,mpg hd whls,'00

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Hitachi-Seiki #HT23SII, Seiki Multi,10"3-jaw,KV turret,tooling,tailstock,1996

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Hitachi-seiki #HT23SII, 3"thru hole, 2.5"bar dia, 15"swing, 10"turn dia, 2-x (25741)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Hitachi-Seiki #HT-25S, CNC turning center,Fanuc GN10,10"3-jaw chuck,tailstock,1986,#BR4009

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Hwacheon Hitech #200A, lv.tlg,Fanuc Oi-TC,20"swing,8"chk,tlstk w/20"ctrs,2004

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Index #V200, Index C200-4 CNC ctrl,10.5"sw,7.87"turn lgth,T-slot tool tbl,1998,#22878

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Index #V200 CNC turning lathe, Index C200-4,16.54"swing,7.87"turn dia.,20.47"X,7.87"Z (3)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Johnford #SL-300, Fanuc OiTC w/man.guide,4500rpm,20hp mtr.,8"chk,12-sta.turr,'05

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

Johnford #ST80B, 50 HP, 2K RPM, 12-sta.turr,FNC OITC,prog.tlstk,presttr,18" chk,'06

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

Johnford #TC35, Fanuc OT, 12" chuck, 30" centers, chip conveyor, 1998

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Jones & Lamson #4518, 18"chk,4.5"bar,2-axis,50 HP,2 turrets,heavy duty,'90,#293687

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Kia #KIT30A, Fanuc OT,18.9"swing,6"chuck,gang tooling,1.5"bar cap,1996

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Kingston #CL-38B, CNC oil field turing center,Fanuc OT,25.9"swing o/bed,14.5"SOCS,18"3-jaw chuck,1997,#MV1404

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Kingston #CL-38B, CNC oil field turing center,Fanuc OT,25.9"swing o/bed,14.5"SOCS,18"3-jaw chuck,1997,#MV1405

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Kingston, CNC lathe, 26"x 80"F-bed, 4.7"hole, 3-jaw power, Fanuc, 1998

R M S Industries, Inc, Cincinnati, OH 800-485-1125 (Fax 513-232-4900) Rudy Skoff

Kitako #VT4-200, Fanuc 18i, 10" swing, 4-spindle, 8" chucks, 4000 RPM, 2000

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mazak #610 Multiplex, Mazatrol T32,twin spdl,live tlg,13.78"sw,1.65"bar cap,'93

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mazak Micro Slant 15, 6"chuck,1.75"bar,2-axis,15 HP,good condition,1984,#281213

DMC Machinery, Cleveland, OH 216-470-0270 () Andrew Miller

Mazak #QT20N, Mazatrol T-2,10"chuck,tailstock,3000 RPM,chip conveyor,25 HP,1986

Gahr Machine Co Inc, Euclid, OH 216-732-3035 (Fax 216-732-3082) Bill Rhea

Mazak #QT250, 8"chuck, 5000 RPM, Fusion 640T, tailstock, chip conv, clean, 2000 [21768]

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Fax 513-542-4819) Sales Dept.

Mazak #QTN-30, universal CNC turning center,Mazatrol T-Plus,3000 RPM,13"pnuematic 3-jaw chuck,1996,#MV-1401

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Mazak #QTN-30, universal CNC turning center,Mazatrol T-Plus,3000 RPM,12"Kitagawa B-12 3-jaw chuck,1996,#MV-1402

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Mori-Seiki #CL-200B, 20"swing, 8"chuck, MSG-803 control, 2001

Noll Machinery Inc, Cleveland, OH 216-332-1870 (Fax 216-332-1873) Fred Mervis

Mori-Seiki #CL25, MSC-521 Mori/Fanuc control, 12"chuck, very nice, 1998

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Mori-Seiki #SL-25, CNC lathe,Fanuc OT,20.5"swing,10"chk,tailstock w/20"cc,1995

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Mori-Seiki #SL-25Y, MF-T6 control,C & Y-axis, live tools, chip conveyor, 1992

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Mori-Seiki #SL5A, Fanuc 10T w/FAPT,12"chuck,3"bore,chip conv.,1987

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Fax440-232-5541) T. Wigglesworth

Mori-Seiki #SL75B, 36"swing, 15"chuck, 68"centers, 6"hole, Fanuc 11T

Noll Machinery Inc, Cleveland, OH 216-332-1870 (Fax 216-332-1873) Fred Mervis

Mori-Seiki #ZL-15S, Mori MF-D6,4-axis,1.6"bar,2.05"spdl bore,FMB 5-42 barfeed,#25619

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Mori-Seiki #ZL-25B/500, 4-axis,Fanuc 16T,20"sw,tailstk w/20"cc,twin turret,1996

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Captain #L370 Big Bore,OSP E100L,20.08"sw,10"chk,tlstk,20.47"cc,3.5"spdl,'01

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Captain #L470 Big Bore,OSP P100,24.4"sw,15"chk,tlstk,25.6"ctr,4.33"spdl.br,'06

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Crown, OSP 700 CNC,SMW brfdr,parts catcher,8"chk,tlstk w/20"cc,low hrs,1998

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Crown #762S-SB, 8"3-jaw,OSP700L control,barfeed,chip conveyor,parts catcher

Advanced Jones Machinery Co, Dayton, OH 937-278-7337 (Fax 937-278-8234) Bob Gibson

Okuma #LB-25, CNC turning center,11.82"X,26.61"Y,OSP5000L-G Okuma ctrl,12"3-jaw Kitagawa chuck,12 station turret,#BR4607

McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Fax 216-761-7144) John Brand

Okuma #LNC8, CNC turning center,OSP 5020L,2.2"bore,15.75"swing,9.84"turn dia. (25266)

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Okuma #LU-15BB, OSP 7000L CNC,10"chuck,Big Bore,tailstock w/23"cc,barfeed,1997

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

Okuma Macturn #350W-2SC-1500, OSP E100L CNC,B, Y & C-axes, (2) turr,low hrs,'04

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Fax 513-771-2552) Sales Dept.

St. Etienne #H1152N, 2-X,45"sw.,160"cc,Flex-Mate CNC,39"4-jaw FP chk,30"4-J,25"3-J,'87

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Fax513-771-5120) Mr.Secord

Wasino #G7F, 4000 RPM,10hp,A2-6 spdl.nose,2.5"spdl,18.9"X,11.2"Z tvl,chip,2000

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

Wasino #LG07F, Fanuc OT,4k rpm,SMW brfdr,A2-6 spdl.nose,Z-axis rapid traverse,'97

Absolute Machine Tools Inc, Lorain, OH 800-852-7825 (Fax 440-960-6918) Sales Dept.

OKLAHOMA

Cincinnati Cinturn #15UX80, Fanuc CNC,15"3-jaw,4"hole,80"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX100, Fanuc CNC,18"3-jaw,4"hole,100"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX60, Fanuc CNC,18"3-jaw,4"hole,60"cc,tlstk,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #18UX80, Fanuc CNC,18"3-jaw,4"hole,80"cc,tlstk,remfr,1 yr warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Cincinnati Cinturn #28UX100, Fanuc CNC,28"3-jaw,6.5"hole,100"cc,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak #M4, Fanuc CNC,15"air chuck,4"hole,60"cc,tailstock,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak #M5, Fanuc CNC,18"air chuck,5"hole,82"cc,tailstock,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

Mazak #M5-3000, Fanuc CNC,12"chuck,5"hole,120"cc,tailstock,remfr,1 yr.warr.

Daniluk Corp, Oklahoma City, OK 405-745-6644 (Fax 405-745-6646) Mike Daniluk

OREGON

Haas #SL-30, CNC lathe, programmable tailstock, manuals, 208/230 V.,ser. 62798

RTR Services Inc, Salem, OR 800-238-3294 (Fax 503-399-0421) Wes Peterson

Okuma Crown, CNC lathe, OSP700L control, 1997, #I-2679

Pacific States Machinery Co, Clackamas, OR 503-722-5117 (503-296-2178) John Poukkula

Okuma #VTM65, vert,40hp,36atc,F 18iTB,never used,special situation,bargain priced,'07

Products Corp., Portland, OR 888-800-2232 (Fax 503-244-0589) Fred Pfaffle

PENNSYLVANIA

Akebono #MINC-26, gang tool,1-1/16"spindle,9"X&Z travel,Fanuc OT,#dk17998

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Bridgeport EZ-Path, 16.5"swing,2"dia.bore,40"BC,8"4-jaw chuck,3000 RPM

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Bridgeport Romi EZ Path lathe, EZ Path CNC,16.5"bed,40"BC,8.6"OCS,2"spdl bore

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Bridgeport Romi EZ-Path, 17"sw, 40"cc, 8"chk, EZ-Path Ctrl, Tlstk, 1994, HB-18429

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Cincinnati Avenger #200T, 8"chk,2"bore,20 HP,5k RPM,Acramatic,1994,#CK-17554

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Daewoo #200LMSC, 8"chuck,live tlg,sub,full C-axis,Fanuc 18T,1999,#HB-17380

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Daewoo Lynx 200A, 6"chk,1.75"bar,20hp,6k rpm,12 pos.trt,Fanuc OiTB,'05, DK-18253

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Galaxy #TNL85T, 8"chk,2.2"spdl.hole,15 HP,5k RPM,Fanuc OT,holders,1998,#hb-17120

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Gildemeister #CTX twin spindle, Grundig Eltro Pilot CNC, 1996

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Gildemeister #MF twin spindle, Siemens Sinumerik CNC,9.44"swing,31.49"cc,'88/'98

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Hankook Protec #5N, 24" swing, 60" centers, 2002, low hours

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

Hardinge #CHNCIII, 1-5/8"cap,10 HP,5k RPM,8 pos.turret,Fanuc 18T,'95,#tk18068

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #CNCI, 1-5/8"cap,10 HP,5k RPM,8 pos.trrt,6"3-jaw,Fanuc OT,'92,#pg-18173

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Cobra 65, 2-1/2", 10"3-jaw, Fanuc 21iT, 15 HP, 4500 RPM (2)

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Conquest 42, slant bed,1-5/8",Fanuc OT,tlstk,10 HP,5k RPM,'88,#dk-17799

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Conquest #T51BSP, 2.5"bar,25C cllt,10 pos.trrt,Fanuc 18T,sub,'99,#dk-18361

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Conquest #VT100, vert,12"chuck,Fanuc 18TB,20 HP,3400 RPM,'99,JV-16512

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge CS-GT, gang tool, 1-1/16", 5 HP, 6K RPM, Fanuc 18T, barfeed,'96,TK-18444

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Elite #42M, 1.625"bar,12 pos.trrt,tlstk,C-axis,Fanuc 21iTB,'08,#dk18375

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Elite #II6/42, 1.625"bar,12 pos trrt,tlstk,C-axis,Fanuc 21iTB,'05,#dk18376

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge Quest #8/51, lv.tlg,sub,Y,2"bar,Fanuc 16iT,4-operating hrs.,'06,DK-18385

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #SR300, 8"chk,2"br,30 HP,tlstk,12 trt,Fanuc 21iT,undr 50 hrs,'07,dk-18397

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #SV200/66, 8"chk,2.6"bar,25HP,4k RPM,slt.bd,tlstk,undr 50 hrs,'08,dk-18387

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #T-42SP, 3-axis,ram turret,1-5/8",Fanuc 18T,10 HP,5k RPM,1993,#hb-17684

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Hardinge #T51, 20C,2"bar,20 hp,tlstk,Fanuc OTC,lots tl.hdlrs,collets,'96,#dk18049

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Index #V200, vert.chucker,5"chuck,12.7"swing,C-axis,live,7500 RPM,gantry,1999

AMTAC Corp, Erie, PA 814-838-4629 (Fax 814-838-4557) Russ Taccone,Jr.

Index #V200, 2-axis vertical turning center,Fanuc 16T,8"pwr chuck,14 pos.turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Index #V250, 2-axis vertical turning center, Fanuc 16T, 12 position turret

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

LeBlond #50/30 Raised 4625NK Tape Turn I, F-18iT,50"sw.,30"/33"OCS,7-1/16"spdl hole

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

LeBlond #5029NK Tape Turn I, Fanuc 18iT,50"swing,29"OCS,7-1/16"spindle hole

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Miyano #BMC34T, twin turret, Fanuc OT, 7.5, 5k RPM Spdl, 5C Clt, '88, HB-18291

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Moore Nanotech #250UPL,3-ax.diamond contour lth,C-ax.,1.0 Nanometer Res,'08,DK18466

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

Mori-Seiki #NL2500S-MC-700, slant bed,sub-spdl,4-axis,FMB barfeed,2006,#08376

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Mori-Seiki #ZL-25MC/1000, 4-axis,20"x 45"cap.,tlstk,live tlg,LNS B/F,'96,#06001

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Fax 717-845-9497) Dave Hildebrand

Takisawa #TM-20, live tlg, sub, 10"chk, Fanuc OT, 4500 RPM, 30 HP, A26 Spdl, '92, HB-18399

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Fax 610-694-0944) Tom Khoury

W & S #SC20-120 lathe, Fanuc 18iT,24"chk,8"spdl,21"SOCS,28"swing o/bed,120"BC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Warner & Swasey #SC25, 24"chk,8-3/8"thru hole,29"sw,24-3/4"ov/carr.,NUM1060 CNC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

W & S #SC25-120 lathe, Fanuc 18iT,24"chk,6"spdl,25"OCS,33"swing o/bed,120"BC

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

Warner & Swasey #SC32, 32"chk,13"thru hole,36-1/2"sw,32-1/2"over carriage

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Fax 724-225-8112) George Hadanich

SOUTH CAROLINA

Hitachi-Seiki #HT25G, CNC lathe,10"chuck,steady rest,tailstock,chip conv.,1999

International Machinery Sales, Lancaster, SC 803-286-5875 (Fax 803-286-5898) Wayne Earl

Mazak Slant Turn #60N, T-32-2,5.5"bar,28"chk,60 HP,1k RPM,15 tools,tlstk,chip,'91

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mazak #SQT-250MSY, Fusion 640,2.5"bar,10"chk,25 HP,4k RPM,12 tools,APC,chip,'00

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mori-Seiki #MT-2000a1SZ Gantry, Fanuc,2.5"bar,8"chk,40"L,120 tools,4500rpm,'04

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mori-Seiki #NL1500MC, Mit,2"bar,6"chk,15hp,12 tools,6k RPM,milling,chip,tlstk,'04

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

Mori-Seiki #SL250B/500,Fanuc 18T,2.87"bar,10"chk,20hp,3500rpm,10 tools,chip,'98 (2)

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Fax 803-548-8001) Dale

TENNESSEE

Hyundai #8S, Siemens CNC, 6" chuck, TS, from school

Winslow's Machine Tool Sales, Lexington, TN 731-614-1296 (Fax 731-968-8976) Don Winslow

Nardini CNC Lathe, Logic 500G, 39"x 166", 7.5"hole, Fanuc 20TA, 1997

Opincar Machinery, Smyrna, TN 615-459-7983 (Fax 615-223-9820) Tom Opincar

TEXAS

American #4025-120, 32"chuck, 12.5"bar, 50 HP, Fagor ctrl, new spdl.drive, 1982

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

American #4025X60, Fanuc OTC,40"swing,2-axis,3.25"hole,31.5"3-jaw,CC,78"BC,'96

KGI Machine Tool, Houston, TX 832-647-3280 () Kent Gasaway

Churchill, Fanuc 10T,25"swing,14"turn,3.7"spdl bore,30 HP,4k RPM,collet chuck

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Cincinnati Cinturn #8C, Acramatic 950,live tools,8"chk,30 HP,chip cnvyr,202 hr.

HTR Inc., Houston, TX 281-376-8950 (Fax 281-376-8476) Mike Starling

Clausing Metosa #EL1340 CNC, Fagor control w/graphics & teach mode, 1997

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Daewoo Puma #8HC, Mitsubishi Meldas 500L ctrl,8"Kitigawa pwr chk,tool setter,'95

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

Dainichi #F-30, CNC,12"chuck,3.1"bar,2-axis,25 HP,chip conveyor,tooling,#165674

Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Fax 713-589-3525) Gary Laconis

Dalian #CKE6163, CNC Teach,24.8"x 118",Fanuc,21.6"bed wdth,4P auto index turret,New

Shamrock Machinery Co, Houston, TX 713-699-3355 (Fax713-699-3389) Mike Richards

G & L #15U, 12"chk,40 HP,updated AC spdl drive,G&L 800B ctrls,prog.tailstock,1980,stock #7853

On-Line Machine & Tool, Porter, TX 281-482-1771 (Fax 281-482-8956) Billie Trainer

Hardinge #CHNCII, Fanuc OT,14"swing,8"sw. OCS,12"cc,1-7/8"spdl.hole,8 sta.tur.

N & R Machine Sales, Sealy, TX 979-885-2449 (Fax 979-885-2463) Randy Nevels

Hyundai #HI18S, Seiemsn 840C,12"3-jaw,8 tools,tailstock,chip conveyor,1997

Bradley Machinery & Valuation, Houston, TX 713-302-7087 (Fax 713-465-9522) Skip Bradley

Jones & Lamson #4512 Combi,Fanuc OT,5.25"hole,1200rpm,40hp,rblt/retro '02(11319)

CNC MACHINERY & EQUIPMENT:LATHES, COMBINATION, CNC

CNC MACHINERY & EQUIPMENT:
LATHES, COMBINATION, CNC