Advanced Search
Surplus Record

LATHES, TRACER & COPYING (Also See Lathes, Engine)

Nardini #AM32120, engine lathe w/tracer attachment, 2000

Request a Quote
More Photos & Detailed Specs
Share
Nardini #AM32120, engine lathe w/tracer attachment, 2000   Click for video
Heavy duty geared head Nardini AM32/120 Engine lathe, equipped with Tracer attachment, (1)steady rest, (1) 28" 4 jaw manual chuck, rapid traverse

Can be used with or with out the tracer attachment.

https://www.youtube.com/watch?v=ZxAv3N2cvxE
http://www.youtube.com/watch?v=_R0WRWX2LcA

Capacity:

Distance between centers...........................120"
Swing over the bed.................................32"
Swing over the wings of saddle.....................29 1/4"
Swing over the cross slide.........................22 3/8"
Swing in the gap...................................43"
Gap length in front of the chuck...................9 1/4"
Cross slide travel.................................19 1/2"
Top slide travel...................................8"
Tool section.......................................1 1/2 x 1 1/2"

Bed:
Width..............................................20"
Height.............................................17 3/4"

Headstock:
Spindle nose.......................................ASA A1-15
Spindle bore.......................................5 25/32"
Spindle internal taper.............................1:20
Taper in reduction sleeve..........................MT-6
Spindle speeds.....................................18
Speeds range.......................................6.3-500 rpm

Tailstock:
Quill diameter.....................................4 3/8"
Quill travel.......................................12"
Quill internal taper...............................MT-6
Lateral adjustment.................................5/8"

Threads and Feeds gear Box:
Threads number.....................................96
Metric threads (16)................................0.6/8 mm
Inch threads (32)................................44/3 TPI
Module threads (16)................................0.375 / 5 Mod
Diametral pith threads (32)........................6 / 88DP
Enlarged pitch threads system......................8:1
Leadscrew pitch....................................2TPI

Feed Range:
Feeds number.......................................128
Longitudinal feeds (64) IN / Rev...................0.0034 / .0740
Cross feeds .......(64) IN / Rev...................0.0017 / .0370
Enlarged feeds system..............................8 : 1
Longitudinal rapid feed............................102 IN/Min.
Cross rapid feed...................................51 IN / MIN.

Motors:
Main motor.........................................30 HP
Rapid traverse.....................................1 1/2 HP
Coolant unit motor.................................1/8 HP



Surplus Record Surplus Record, Inc. All Rights Reserved.
http://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise