Advanced Search
Surplus Record logo

GRINDERS, SURFACE RECIPROCATING TABLE (Horizontal Spindle)

5" x 12" Taft Pierce #1, surface grinder, roller bearing table, tilt wheelhead, fine feeds, 1967, #150592

Request a Quote
More Photos & Detailed Specs
Share

General Specifications


Width/Cross: 5.0" Width/Cross
Length/Longit.: 12.0" Length/Longit.
Manufacturer: taft-pierce
Model: 1
Stock #: 150592

Dealer Information
Machinery Values Inc logo
Machinery Values Inc
401 Supor Blvd.
Harrison, NJ 07029-2059
Youtube icon  
Contact: Andrew Valitt
Tel: 973-497-7600
Fax: 973-497-7501
Email: grinders@machineryvalues.com
  
Gold Level Dealer Since 1997
Website: www.machineryvalues.com/

View our Equipment Listings

Detailed Product Description


5" X 12" TAFT PEIRCE MODEL #1 (MADE IN USA)

"HIGH-PRECISION" HAND FEED SURFACE GRINDER

WITH FINE FEED OPTION FOR CROSS & VERTICAL AXES

(.000050" GRADUATION)


S/N: 2446 NEW: 1967



*** TILTING (30 DEGREES) WHEELHEAD DESIGN ***




WIDTH& LENGTH GROUND ........................ 5" X 12"

TABLE TO SPINDLE CENTER ............................ 12"

LONGITUDINAL TABLE TRAVEL ..................... 13- 1/2"

TABLE MOVEMENT PER REV. OF HANDWHEEL .............. 3.4"

CROSS TRAVEL ................................... 5- 1/2"

GRINDING WHEEL CAPACITY .............. 7" X 1/2" X 1-1/4"

CROSSFEED MOVEMENT PER REV. OF HANDWHEEL ....... 0.100"

CROSSFEED HANDWHEEL GRAD. ....................... 0.001"

CROSS FINE FEED KNOB GRAD. ...................... 0.00005"

VERTICAL FEED PER REV. OF HANDWHEEL ............. 0.050"

VERTICAL FINE FEED KNOB GRAD. .................. 0.00005"


APPROX. WEIGHT ................................ 1,500 LBS.

APPROX. DIMENSIONS ...................... 61" X 45" X 66"H


MACHINE FEATURES:

CAST IRON, HEAVILY RIBBED CONTRUCTION W/SMALL FOOTPRINT

BALL MOUNTED TABLE, ROLLER MOUNTED SADDLE & BALL TRACKED

COLUMN, PLUS BALL BEARINGS THROUGHOUT, PROVIDE FOR

EXTREMELY HIGH PRECISION CAPABILITY.

REPLACEABLE LONGITUDINAL WAYS (VEE & FLAT WAY)

CROSSFEED HAS ANTI-BACKLASH NUT ASSEMBLY

SADDLE LOCK FOR CONVENIENCE IN FORM GRINDING OPERATIONS

SADDLE IS SUPPORTED ON TWO HARDENED & GROUND FLAT STEEL

WAYS

ENTIRE SPINDLE COLUMN MOVES FOR VERTICAL SPINDLE FEED

1 H.P. TAFT PEIRCE SUPER-PRECISION SPINDLE DRIVE,

3/60/220-440 VOLTS

BIJUR ONE-SHOT LUBRICATION SYSTEM


EQUIPPED WITH:

TILTING WHEELHEAD OPTION (30 DEGREES)- THIS FACILATATES

GRINDING TO SHARP CORNERS&SHOULDER AS WELL AS FINISHING

OF SLOTS, DOVETAILS& UNDERCUTS WITH THE ANGULAR FACE

OR PERIPHERY OF THE WHEEL.

FINE FEED KNOBS FOR CROSS & VERTICAL AXES (.00005" GRAD.)

5" X 12" FINE-DIVISION ELECTRO-MAGNETIC CHUCK

NEUTROFIER CONTROL FOR THE CHUCK

MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS


** INSPECT UNDER POWER OUR HARRISON, NJ WAREHOUSE **

** EXCELLENT CONDITION & APPEARANCE **

** RIDICULOUSLY QUIET SPINDLE!! **