Advanced Search
Surplus Record

CNC MACHINERY & EQUIPMENT

MILLERS, VERTICAL/UNIVERSAL, CNC

Servo #6000, 3-Axis CNC bed mill, 14" x60" tbl, 42" x21" trvl, head tilt, manual quill, 5 HP

Request a Quote
Share
Servo #6000, 3-Axis CNC bed mill, 14" x60" tbl, 42" x21" trvl, head tilt, manual quill, 5 HP
USED SERVO "6000" 3-AXIS CNC BED MILL

INVENTORY # 5407

MODEL: 6000

S/N: S600193J

SPECIFICATIONS:

TABLE: 14" x 60"

TABLE TRAVEL (X-AXIS): 42"

SADDLE TRAVEL: (Y-AXIS): 21"

HEAD TRAVEL (Z-AXIS): 25"

QUILL TRAVEL (MANUAL): 5"

QUILL DIAMETER: 4 1/8"

QUILL-TO-TABLETOP: 1/2" - 18 1/2"

MAXIMUM WORKPIECE: 2,400 LBS

SPINDLE: 40 NST TAPER (USES NMTB 40 TOOLING)

SPINDLE DIAMETER: 1.875"

SPINDLE (VARIABLE):

BACK GEAR: 50 - 500 RPM

DIRECT DRIVE: 500 - 5,000 RPM

RAPID FEED RATE (X & Y): 190 IPM (MAXIMUM)

CNC FEED RATE: .01 TO 100 IPM

AXIS DRIVES: VR BRUSH-LESS DC

PEAK TORQUE: 165 1N/LB

CONTINUOUS TORQUE: 115 IN/LB

PROGRAMMABLE RESOLUTION: /- 0.0001” (MINIMUM)

MECHANICAL SPECIFICATIONS:

INVERTER DRIVE SPINDLE: 220 VAC, 3 PHASE, 60 HZ, 30 AMPS

WEIGHT (APPROXIMATE): 6,600 LBS

DIMENSIONS: 93" H x 130 W x 84" D

SERVO OPERATOR CONSOLE:

S/N: 04-010598

STANDARD CONTROL:

* MS-DOS-BASED SYSTEM (INSTALLED)

* 14" VGA COLOR MONITOR

* ONE RS-232 SERIAL PORT

* 586-75 MHZ PROCESSOR

* FULL 101-KEY KEYBOARD

* 8 MB RAM (RANDOM ACCESS MEMORY)

* 1 GB (MINIMUM) HARD DRIVE

* 1.44 MB 3 1/2" FLOPPY DRIVE

* ENCLOSED WITH SWIVEL MOUNTING ARM

* 110-120 V, 1 PHASE, 50-60 HZ, 5 AMPS, FILTERED AND GROUNDED

MACHINE FEATURES:

* 5 HP with 40 TAPER SPINDLE HEAD (USES NMTB 40 TOOLING)

* TRAVEL X, Y, Z (42" x 21" x 25")

* MILLING HEAD TILTS 45° R/L

* INDEPENDENT QUILL TRAVEL CAN BE USED MANUALLY WITH 3-SPD POWER FEED

* WORK SURFACE (13.8" x 60")

* Z-AXIS COUNTER-BALANCED FOR QUICKER MOVEMENT, and LONGER MOTOR/SCREW LIFE

* INVERTER-DRIVEN SPINDLE DRIVE MOTOR

* PRECISION GROUND 32 mm. 6 PITCH BALL SCREWS (X,Y,Z)

* POWER SPINDLE DRAW BAR

* HARDENED AND GROUND SQUARE , BOX-TYPE WAYS (Y-AXIS, Z-AXIS)

* HARDENED AND GROUND DOVETAIL TABLE WAYS (X-AXIS)

* TURCITE COATED WAYS

* WAY COVERS (Y, Z)

* HEAVY MEEHANITE CASTINGS

* FULL MANUAL MILL CAPABILITY

* TEACH/CONVERSATIONAL/CNC PROGRAMMING CAPABILITIES

* BIJUR AUTO LUBE SYSTEM STANDARD

* AUTOMATIC FLOOD COOLANT SYSTEM STANDARD

FOUR METHODS OF OPERATION:

1) MANUAL MILL CAPABILITY (SYSTEM ON/DRIVES FREE):

FULL MANUAL CAPABILITY ALLOWS YOU TO USE HAND-WHEELS TO MOVE X, Y AND Z. OR, USE HANDHELD PENDANT TO MOVE EACH AXIS UNDER POWER, CONTROL DIRECTION AND FEED RATE. IN EITHER OF THESE SITUATIONS, SYSTEM READS EACH AXIS POSITION ON CRT

2) TEACH PENDANT MODE:

EASY-TO-USE HAND-HELD PENDANT LETS YOU TEACH XYZ POINT-TO-POINT AND ANGULAR PART MOVES. JOG MOVES RANGE FROM .0005" TO .050" FOR PRECISE POSITIONING. YOU CAN SELECT RAPID OR FEED RATE MOVES, SINGLE STEP THROUGH PROGRAMS, SET AND CLEAR AXIS LIMITS, PLUS STORE UP TO FOUR SUB-ROUTINES IN MEMORY.

3) QUICK & EASY CONVERSATIONAL PROGRAMMING:

CONVERSATIONAL PROGRAMMING MODE PROVIDES FULL PROMPT MENUS AND HELP SCREENS SO ANYONE WITH A KNOWLEDGE OF READING BLUEPRINTS CAN PROGRAM IN THIS SOFTWARE MODE. FEATURES INCLUDE GRAPHIC TOOL PATH VERIFICATION, REAL-TIME GRAPHICS, AUTOMATIC CYCLES (POCKET CLEAR, BOLT HOLE PATTERNS, ETC.), ABSOLUTE/INCREMENTAL PROGRAMMING, INCH/METRIC PROGRAMMING, AUTOMATIC CORNER RADIUS, BACKLASH COMPENSATION, FIXTURE/AXIS OFFSETS, AND MORE.

4) CNC MODE (G & M CODE PROGRAMMING COMPATIBLE w/MOST CAD/CAM SYSTEMS):

FEATURES SUCH AS XY, XZ, AND YZ CIRCULAR INTERPOLATION, UP TO 4-AXIS LINEAR INTERPOLATION, TOOL SELECT, SCALING/MIRROR IMAGE, CUTTER DIAMETER COMPENSATION, AXIS POSITION PRESET, CONTINUOUS CONTOURING, HELICAL INTERPOLATION, BACK-LASH COMPENSATION, TOOL LENGTH OFFSET AND FIXTURE OFFSET.

EQUIPMENT INCLUDED:

* MPG. / TEACH PENDENT

* BIJUR AUTO LUBE SYSTEM

* WORK LIGHT

* AUTOMATIC FLOOD COOLANT SYSTEM

* ALL BOOKS AND TRAINING MANUAL

THIS MACHINE IS A NEW ARRIVAL AND HAS NOT BEEN COMPLETELY CHECKED OUT. PLEASE CONTACT US PRIOR TO PURCHASE.


Surplus Record Surplus Record, Inc. All Rights Reserved.
https://www.surplusrecord.com
Tel: 312-372-9077        Customer Service        Mobile Apps        Advertise