14" x 40", NARDINI, No. MS1440E, Inch/mm, 2500 RPM, Taper, Clean

Inventory ID: 25846
Manufacturer: Nardini

Specifications:
NARDINI GAP BED ENGINE
MODEL: MS-1440E
SERIAL NUMBER: D3-JEM-884

GENERAL SPECIFICATIONS
Swing Over Bed: 13-3/4"
Swing Over Wings Of Saddle: 12-1/4"
Swing Over Cross Slide: 7-7/8"
Distance Between Centers: 40""
Cross Slide Travel: 8"
Top Slide Travel: 4"
Spindle Bore: 1-21/32"
Spindle Nose: D1-5"
Spindle Speeds: (18) 31.5to 2500 RPM
Tailstock Quill Diameter: 2"
Tailstock Taper: No. 3 MT
Tailstock Quill Travel: 5-1/8"
Number of Threads: 192
Metric Threads: (45) .40 to 7
Inch Threads: (48) 3.5-42 TPI
Module Threads: (48) .1 to 1.75
Diametral Pitch Threads: (48) 14 to 168
Pitch Of Leadscrew: 4 TPI
Number of Feeds: 192
Longitudinal Feeds, Inch: .0016 to .399 in/rev
Longitudinal Feeds, Metric: .042 to 1.013 mm/rev
Cross Feeds, Inch: .0007 to .0213 in/rev
Cross Feeds, Metric: .019 to .542 mm/rev

EQUIPPED WITH
6 HP Motor
Hardened Bed Ways
8" 3-Jaw Chuck
Taper Attachment
Thread Dial
Splash Guard, Chip Pan, Coolant System

Approximate Weight: 2800 Lbs.

F.O.B. Cincinnati, Ohio

PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATIONS