50 TON PHI MOLDING & LAMINATING PRESS
Mfd. 1985
Hydraulic
Model S50R2424S-2LC-P-Y2-S8R
4 post upstroke type
Floor standing
Distance between 2.5" dia. posts: 28" L-R x 18" F-B
Platen area (nominal): 28" L-R x 25" F-B
Overall dimensions of platen: 35" L-R x 25" F-B
Stroke of fully guided platen: 0 - 6" maximum
Daylight opening (total): 14" - 32" maximum
Daylight opening between
hot plates (1): 14" - 32" maximum
Hot plates (2): 24" L-R x 24" F-B x 2" thick
(Electrically heated to 600° F. -
water cooled)
Insulation (2): 24" L-R x 24" F-B x 2" thick
Main ram diameter (1): 6.5" @ 3015 PSI - 50 tons
Floor to top of moving platen: 42"
Power unit (base of press): Vickers hydraulic pump, driven by
1 HP 1800 RPM 230/460/3/60 motor
Nachi hydraulic pump, driven by
2.5 HP 1200 RPM 230/460/3/60 motor
Speeds approx.: 80"/min. closing
7.6"/min. pressing to 50 tons
Gravity return
Controls: Pushbutton operation w/stroke &
pressure control
Dual palm buttons
Cycle timers for preheat, cure, cool
(2) digital temperature indicating
controllers
Low & high pressure gauges
Weight approx. 6000#
Overall dimensions approx. 65" L-R x 34" F-B x 83" H
Serial no. 85-4-013
Stock no. 25783
FOB ELK GROVE VILLAGE, IL