LU25-M 2ST-400 Okuma 4-Axis CNC Turning Center with Live Milling

Serial No. 0902-0263 Age: 1997

Swing over Bed 650mm (25.59")
Swing over Carriage 420mm (16.54")
Swing over Cross-slide 330mm (12.99")
Max. Turning Diameter x Length 16.54" x 15.75"
Spindle Nose Type JIS A2-11
Through Spindle Hole 3.94"
Spindle Speed 40 - 2800 RPM
M Spindle Speeds 50 - 3000 RPM
CROSS SLIDE (X-AXIS)
Upper Axis Travel 210mm   90mm, (8.27"   3.54")
Lower Axis Travel 130mm   65mm, (5.12"   2.56")
Feedrate 0.00001 - 39.37 IPR
Rapid Feedrate 150000mm/min (590.55 IPM)
CARRIAGE Z-AXIS
Axis Travel Upper 725mm (28.54")
Axis Travel Lower 660mm (25.98")
Feedrate 0.00001 - 39.37 IPR
Rapid feedrate 20000mm (787.40 IPM)
Turret Type Upper V12
Turret Type Lower V10
No. of Tools 22
OD Turning Tools 25mm (0.98")
ID Turning Tools 40mm (1.57")
Spindle Drive Motor 15/22kW (20/30 HP)
Carriage feed (Z-Axis) 3.6kW (4.8 HP)
Cross-slide Feed (X-Axis) Upper 3.6kW (4.8 HP)
Cross-slide Feed (X-Axis) Lower 2.5kW (3.4 HP)
Floor Space Required 147.44" x 85.58"
Net Weight 15,400 lbs

Equipped With:
OSP7000L CNC Controls. Live Milling to Upper Turet. Spindle Orientation. C-Axis Contouring. Complete With MacMan. Animation. M-Axis Orientation. Load Monitor. LAP4. User Task 2. 320m Tape Storage. Synchro Tapping. 2 Sets Spare M-Codes. Tool Life Management. NC Turrets. 12-Position V-12 Upper Turret. 10-Position V10 Lower Turret. Coolant Pump and Tank. Chip Conveyor. Transformer.